trims plmt for women - am retail group careers · po label placement and extra btn placement po...
TRANSCRIPT
December 2015
sss ss ssss
sssss
ssss
ssss
ssss
ssss
ssss
ssss
ssss
s
TRIMS PLMT FOR WOMEN - WOVEN TOP W/SIDE SEWN MAIN LABEL (NO PLACKET)
Ref code : GHWL-01
- Main label: 1/2” down from neck seam at center back - Size / Content / origin: set at bottom of main label - CC label: Back side of the Size / Content / Origin label - Disclaimer tag (when applicable): to be behind of hangtag
- Hangtag w/ swift tack (when applicable): to be attached to the loop
of the size/content/origin label(Front of Hangtag should be Faced up) - Price sticker (when applicable): to be affixed to the back of hangtag
- PO label (when applicable): sewn into wearer’s left seam 3” up
from bottom hem - Size sticker (when applicable): 1 1/2” up from bottom and 1 1/2”
from right side of folded garment - Polybag with ventilation holes and half moon cut
*Remark: Polybag quality / thickness / ventilation holes, please refer to trimming layout
1/2”
Main label
(side sewn)
Centerline
Disclaimer tag (when applicable)
old # BLP-06
Size / Content /
Origin / CC label
Hangtag w/Price sticker
Price sticker placement
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag to expose
the price sticker on top for easy scan pack - When goods get to store and hang loosely - the hangtag
“GH BASS” words will show on the outside
(in stock) (during packing)
PO label placement
PO Label :
3” up from
bottom hem
of wearer’s
inside left
side seam
3“
sssss
Size sticker placement
1 1/2” from btm & 1 1/2” from right side of folded garment
1-1/2”
s
December 2015
sss ss sss
ssss
ssss
ssss
ssss
sssss
ssss
ssss
ssss
ss
TRIMS PLMT FOR WOMEN - WOVEN TOP W/SIDE SEWN MAIN LABEL (PLAC KET)
Ref code : GHWL02 - Main label: 1/2” down from neck seam
- Size / Content / origin / CC label: set at bottom of main label Centerline - CC label: Back side of the Size / Content / Origin label - Disclaimer tag (when applicable): to be behind of hangtag
- Hangtag w/ swift tack (when applicable): to be attached to the loop 1/2”
of the size/content/origin label (Front of Hangtag should be Faced up)
- Price sticker (when applicable): to be affixed to
the back of hangtag - PO label (when applicable): sewn into wearer’s
left seam 3” up from bottom hem Main label - Size sticker (when applicable): 1 1/2” up from bottom (2 side sewn) and 1 1/2” from right side of folded garment
- Extra buttons (when applicable): placed 1“ and 2” up from bottom hem on the inside of the wearers left side seam
- Polybag with ventilation holes and half moon cut Disclaimer tag
(when applicable)
*Remark: Polybag quality / thickness / ventilation holes, please refer to trimming layout
Hangtag w/Price sticker
old # BLP-113
Size/Content/
Origin label / CC label
Price sticker placement (When applicable)
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag to expose
the price sticker on top for easy scan pack - When goods get to store and hang loosely - the hangtag
“GH BASS” words will show on the outside
(in stock) (during packing)
PO label placement and Extra btn placement
PO Label :
3” up from Extra button : 1" and 2” up from
bottom hem bottom hem on of wearer’s the inside of the inside left wearers
left side seam side seam
3“ 2”
1”
sssss
Size sticker placement
1 1/2” from btm & 1 1/2” from right side of folded garment
1-1/2”
s
December 2015
sss ss sss
ssss
ssss
ssss
ssss
sssss
ssss
ssss
ssss
ss
TRIMS PLMT FOR WOMEN - WOVEN SHIRT (SOFT TOP)
Ref code : GHWL03
- Main label: 1/2” down from neck seam
- Size / Content / COO label / CC label: set at bottom of main label - Hangtag (when applicable): to be through the size / content /
COO label / CC label 1/2” - CC label: Back side of the Size / Content / Origin label - Disclaimer tag (when applicable): to be behind of hangtag - Price sticker (when applicable): to be stuck to the back of hangtag
- PO label (when applicable): sewn into wearer’s left
seam 3” up from bottom hem - Size sticker (when applicable): 1 1/2” up from bottom Main label
and 1 1/2” from right side of folded garment (sewn two side)
- Extra buttons (when applicable): placed 1“ and 2” up from bottom hem
on the inside of the wearers left side seam - Polybag with ventilation holes and half moon cut
*Remark: Polybag quality / thickness / ventilation holes, Size / Content /
please refer to trimming layout COO label / CC label
Hangtag :
(price sticker
should face down)
Centerline
Disclaimer tag
(when applicable)
old# BLP-150
Price sticker placement
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag to expose
the price sticker on top for easy scan pack - When goods get to store and hang loosely - the hangtag
“GH BASS” words will show on the outside
(in stock) (during packing)
PO label placement
and Extra btn placement
PO Label : Extra button :
3” up from 1" and 2” up from
bottom hem bottom hem on the inside of the
of wearer’s wearers
inside left left side seam
side seam
3“ 2”
1”
sssss
Size sticker placement
1 1/2” from btm & 1 1/2” from right side of folded garment
1-1/2”
s
December 2015
sss ss ssss
ssss
ssss
ssss
ssss
ssss
ssss
ssss
ssss
ss
TRIMS PLMT FOR WOMEN - KNIT TOP CAMISOLES W/ PRINTED MAIN LABEL
Ref code : GHWL04
- Printed main label: 3/8” below bottom of neck seam at center back old # BLP-138
- Main hangtag w/ price sticker(when applicable): swift tack to be placed
at the 1/4“ down from the underarm seam (wearer’s left hand side) - Price sticker (when applicable): to be affixed to the
back of hangtag - Care label: sewn into wearer’s left seam 3” up from bottom hem - PO label (when applicable): sewn into wearer’s left
seam 3” up from bottom hem and underneath of care label Centerline - Size sticker (when applicable): 1 1/2” up from bottom
and 1 1/2” from right side of folded garment *Remark: Polybag quality / thickness / ventilation holes,
please refer to trimming layout 3/8”
M
1/4”
Printed main label
Main hangtag
(w/UPC sticker)
Price sticker placement
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag to expose
the price sticker on top for easy scan pack - When goods get to store and hang loosely - the hangtag
“GH BASS” words will show on the outside
(in stock) (during packing)
Care / PO label placement
care label
PO label
3“
sssss
Care label: 3” up from bottom hem of wearer’s inside left side seam PO label: underneath of care label
Size sticker placement
1 1/2” from btm & 1 1/2” from right side of folded garment
1-1/2”
s
December 2015
sss ss ssss
ssss
ssss
ssss
ssss
ssss
ssss
ssss
ssss
ss
TRIMS PLMT FOR WOMEN- FOR KNIT TOP W/ PRINTED MAIN LABEL
Ref code : GHWL05
- Printed main label: 3/8” below bottom of neck seam at center back
- hangtag: to be attached to intersection of shoulder seam and wearer’s left hand side (price sticker should be faced up)
- Price sticker (when applicable): to be affixed to the back of hangtag
- Disclaimer Hangtag(when applicable): to be behind of hangtag
- Care label: sewn into wearer’s left seam 3” up from bottom hem
- PO label (when applicable): sewn into wearer’s left seam 3” up from bottom hem and underneath of care label
- Size sticker (when applicable): 1 1/2” up from bottom and 1 1/2” from right side of folded garment
*Remark: Polybag quality / thickness / ventilation holes, please refer to trimming layout
For crew neck style
Centerline
3/8”
M
Printed Main label
For polo neck style
3/8”
Printed M
Main label
Centerline
old# BLP-08
Hangtag placement
Hangtag
1” from neck seam
Disclaimer Hantag (when applicable)
INSIDE BACK BODY
Price sticker placement
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag to expose
the price sticker on top for easy scan pack - When goods get to store and hang loosely - the hangtag
“GH BASS” words will show on the outside
(in stock) (during packing)
Care / PO label placement
care label
PO label
3“
sssss
Care label: 3” up from bottom hem of wearer’s inside left side seam PO label: underneath of care label
Size sticker placement
1 1/2” from btm & 1 1/2” from right side of folded garment
1-1/2”
s
December 2015
sss ss sss
ssss
ssss
ssss
ssss
sssss
ssss
ssss
ssss
ss
IIII
IIII
IIII
IIII
IIII
TRIMS PLMT FOR WOMEN - FOR SWEATER W/ SIDE SEWN MAIN LABEL
Ref code :GHWL06
- Main label: 1/2” down from bottom of neck seam at center back old# BLP-11
- Size / Content / Origin: set at bottom of main label Main label (2sides sewn)
Centerline
- CC label: Back side of the Size / Content / Origin label - Hangtag w/ swift tack (when applicable): to be attached to the loop of the size / content / origin label 1/2”
(price sticker should be face down) - Price sticker (when applicable): to be affixed to the back of hangtag Size/Content/ Disclaimer
- Disclaimer tag(when applicable): to be behind of hangtag Origin/ Hangtag
CC label
- PO label (when applicable): sewn into wearer’s left seam 3” up from rib seam - Size sticker (when applicable): 1 1/2” up from bottom and 1 1/2”
from right side of folded garment - Extra buttons (when applicable): placed 1“ and 2” up from rib seam
Hangtag
on the inside of the wearers left side seam (price sticker
- button bag: btn size is bigger than 24 ligne, please use the btn bag should face up)
- Polybag with ventilation holes and half moon cut
*Remark: Polybag quality / thickness / ventilation holes, Centerline Size/Content/
please refer to trimming layout 1/2” Origin label/ CC label
Main label Disclaimer Hangtag
(side sewn)
Button bag
(if the size is Hangtag : price sticker
bigger than 24 Ligne) should be face up
: behind hangtag
Price sticker placement
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag to expose
the price sticker on top for easy scan pack - When goods get to store and hang loosely - the hangtag
“GH BASS” words will show on the outside
(in stock) (during packing)
PO label placement
and Extra btn placement
PO Label : Extra button :
3” up from 1” and 2” up from
rib seam rib seam on the inside of the
of wearer’s wearers
inside left left side seam
side seam
3“ 2”
1”
sssss
Size sticker placement
1 1/2” from btm & 1 1/2” from right side of folded garment
1-1/2”
s
December 2015
sss ss sss
ssss
ssss
ssss
ssss
sssss
ssss
ssss
ssss
ss
TRIMS PLMT FOR WOMEN - WOVEN/KNIT DRESS W/ SIDE SEWN MAIN LABEL
Ref code : GHWL07
- Main label: 1/2” down from bottom of neck seam at center back - Size / Content / Origin: set at bottom of main label - CC label: Back side of the Size / Content / Origin label
- Hangtag (when applicable): to be attached
to the loop of the size / content / origin label (price sticker should be face up)
- Price sticker (when applicable): to be affixed to the back of hangtag
- Disclaimer tag(when applicable): to be behind of hangtag
- PO label (when applicable): sewn into wearer’s left
seam 3” up from bottom hem - Size sticker (when applicable): 1 1/2” up from bottom
and 1 1/2” from right side of folded garment - Extra buttons (when applicable): placed 1“ and 2” up from bottom hem
on the inside of the wearers left side seam - Polybag with ventilation holes and half moon cut
*Remark: Polybag quality / thickness / ventilation holes, please refer to trimming layout
Centerline
1/2”
Main
label
(two
sewn side)
old# BLP-130
Size/Content/
Origin label/ CC label
Hangtag :
price sticker
should be
face up
Disclaimer
tag (when
applicable)
Price sticker placement
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag to expose
the price sticker on top for easy scan pack - When goods get to store and hang loosely - the hangtag
“GH BASS” words will show on the outside
(in stock) (during packing)
PO label placement and Extra btn placement
PO Label :
3” up from Extra button : 1" and 2” up from
bottom hem bottom hem on of wearer’s the inside of the inside left wearers
left side seam side seam
3“ 2”
1”
sssss
Size sticker placement
to be placed 1 1/2” from btm & 1 1/2” from right side of
folded garment
1-1/2”
s (Front view)
December 2015
sss ss sss
ssss
ssss
ssss
ssss
sssss
ssss
ssss
ssss
ss
TRIMS PLMT FOR WOMEN - WOVEN/KNIT DRESS W/ PRINTED MAIN LABEL
Ref code : GHWL08 - Printed main label: 3/8” below bottom of neck seam old# BLP-132
at center back Centerline - hangtag: to be attached to intersection of shoulder
seam and wearer’s left hand side (price sticker should be faced up)
- Price sticker (when applicable): 3/8” back of hangtag
M
- Disclaimer Hangtag(when applicable): of hangtag
- Care label: sewn into wearer’s left seam 3” up from
bottom hem - PO label (when applicable): sewn into wearer’s left seam 3” up from bottom hem and underneath of care label
- Size sticker (when applicable): and 1 1/2” from right side of folded garment
- Extra buttons (when applicable): placed 1“ and 2” up from bottom hem Hangtag placement on the inside of the wearers left side seam
- Polybag with ventilation holes and half moon cut Hangtag
1” from neck seam
*Remark: Polybag quality / thickness / ventilation holes, please refer to trimming layout Disclaimer Hantag
(when applicable)
INSIDE BACK BODY
Price sticker placement For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag to expose
the price sticker on top for easy scan pack - When goods get to store and hang loosely - the hangtag
“GH BASS” words will show on the outside
Price sticker
Back view of Hangtag (in stock) (during packing)
PO label placement and Extra btn placement
Care label :
3” up from Extra button : 1" and 2” up from
bottom hem bottom hem on of wearer’s the inside of the inside left wearers
left side seam side seam
PO label :underneath
of care label 3“
2”
1”
sssss
Size sticker placement
to be placed 1 1/2” from btm & 1 1/2” from right side of
folded garment
1-1/2”
s (Front view)
December 2015
sss ss
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
sss
ssss
ssss
ssss
ssss
sssss
ssss
ssss
ssss
ss
TRIMS PLMT FOR WOMEN - WOVEN / KNIT DRESSES W/ MITERED MAIN LABEL W/ZIP or OPENING @ CENTER BACK
Ref code : GHWL09
- Main label: set at bottom of neck seam & 1/4” to the left of center back old# BLP-135
- Size / Content / COO label: set at bottom of main label - CC label: Back side of the Size / Content / Origin label - Hangtag (when applicable): to be attached to the loop Closure at zipper edge
of the size/content/origin label(price sticker should be face up) with hook & eye Centerline - Disclaimer tag (when applicable): to be behind hangtag
- Price sticker (when applicable): to be affixed to the back of hangtag
- PO label (when applicable): sewn into wearer’s left seam 3” up from bottom hem
- Extra buttons (when applicable): placed 1“ and 2” up from bottom hem 1/4” Mitered
on the inside of the wearers left side seam Main label - Size sticker (when applicable): 1 1/2” up from bottom
and 1 1/2” from right side of folded garment Disclaimer tag
- Polybag with ventilation holes and half moon cut Size / Content / (when applicable)
COO label/CC label *Remark: Polybag quality / thickness / ventilation holes,
please refer to trimming layout Hangtag :
price sticker should face up
Price sticker placement
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag to expose
the price sticker on top for easy scan pack - When goods get to store and hang loosely - the hangtag
“GH BASS” words will show on the outside
(in stock) (during packing)
PO label placement
and Extra btn placement PO Label :
3” up from Extra button : 1" and 2” up from
bottom hem bottom hem on of wearer’s the inside of the inside left wearers
left side seam side seam
3“ 2”
1”
sssss
Size sticker placement
to be placed 1 1/2” from btm & 1 1/2” from right side of
folded garment
1-1/2”
s
December 2015
Pr
ic
e
sti
ck
er
TRIMS PLMT FOR WOMEN - KNIT BOTTOM W/MAIN LABEL ON WAISTBAND
- Main label: place at center back at waistband - Size / Content / Origin label(when applicable): Set at bottom of waistband - CC label: Back side of the Size / Content / Origin label - Disclaimer Tag (when applicable): to be placed behind of hangtag
Ref code : GHWL10
old# BLP-01
- Hangtag (when applicable): to be attached to the loop of the size/content/origin label (price sticker should be face down) - Price sticker: to be affixed to the hangtag - Polybag with ventilation holes and half moon cut
*Remark: Polybag quality / thickness / ventilation holes, please refer to trimming layout
Centerline Main label (2 sides sewn)
Printed Main Label Placement (when applicable)
Centerline
Size / Content /
Origin / Care label
Size / Content /
Origin label / Care label
Disclaimer tag
(when applicable) Hangtag : price sticker should face up
Printed main label
Clear swift
tag
Bag end label placement
Polybag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag
to expose the price sticker on top for easy scan pack
PO label placement
Inside back view
Size sticker placement
Size sticker : to be
Bag end label plmt (FOR BULK PACK ONLY) -to be placed 1” up from bottom and 1” over from right edge of front polybag
- When goods get to store and hang loosely - the hangtag “GH BASS” words will show on the outside
PO label
1” below
waist seam
placed on the lower left hand corner as worn (1 1/2” up from btm and 1 1/2” from edge of the folded garment)
1” (in stock) (during packing)
wearer’s left inside sideseam and 1” below from waist seam
s
(Front View)
1-1/2”
December 2015
zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
TRIMS PLMT FOR WOMEN - WOVEN BOTTOM W/MAIN LABEL ON WAISTBAND
Ref code : GHWL11 - Main label: place at center back at waistband old# BLP-155
- Size / Content / Origin label(when applicable): Set at bottom of waistband. - CC label: Back side of the Size / Content / Origin label - Printed Pants name: 4 1/2” from wearer’s right edge - Disclaimer Tag (when applicable): looped through 1st belt loop of wearer’s right side - Hangtag (when applicable): to be swift tack through the size / content / COO label - Joker tag (when applicable): stitched to the wearer’s left back waistband by plastic kimble and place 1/2 of WB - Price sticker: to be affixed to the joker tag - Size strip (when applicable): to be placed 7 1/2” down from bottom of waistband and 1“ from the side of wearer’s left side - Polybag with ventilation holes and half moon cut
*Remark: Polybag quality / thickness / ventilation holes, please refer to trimming layout Centerline
Size / Content / Square Main label Origin / Care label (lockstitch 2 sides) Clear swift Joker tag & Size Strip
tag Printed Main Label Placement (when applicable) Centerline
Size / Content / Price Joker tag
Origin / Care label sticker (when applicable) : 1/2 of WB
7-1/2"
Print main label 1"
1st Clear swift belt loop tag Size strip
(when applicable)
Disclaimer tag Hangtag
(when applicable)
Bag end label placement
Polybag
Bag end label plmt (FOR BULK PACK ONLY) -to be placed 1” up from bottom and 1” over from right edge of front polybag
1”
For packing - Hangtag sequence :
- When vendor packs into polybag he will twist tag to expose the price sticker on top for easy scan pack
- When goods get to store and hang loosely - the hangtag “GH BASS” words will show on the outside
PO label placement
Inside back view
1” below
waist
seam
PO label
wearer’s left inside sideseam and 1” below from waist seam
Extra Button placement
Inside right front
1” Extra
1”
Button 1/4”
2nd extra btn
(where applicable
for pocket)
bag
(in stock)
(during packing)
December 2015
TRIMS PLMT FOR WOMEN - SHORTS W/ MAIN LABEL ON WAISTBAND
Ref code : GHWL12
- Main label: place at center back at waistband old# BLP-164
- Size / Content / Origin label(when applicable): Set at bottom of waistband. - CC label: Back side of the Size / Content / Origin label - Printed Pants name: 4 1/2” from wearer’s right edge - Disclaimer Tag (when applicable): looped through 1st belt loop of wearer’s right side - Hangtag (when applicable): to be swift tack through the size / content / COO label / CC label - Joker tag (when applicable): stitched to the wearer’s left back waistband by sewing thread and place 1/2 of WB - Polybag with ventilation holes and half moon cut - PO label: wearer’s left side side
*Remark: Polybag quality / thickness / ventilation holes, please refer to trimming layout
Centerline Square Main label
(lockstitch 2 sides) Clear swift tag Printed Main Label Placement (when applicable) Joker tag Joker tag
Centerline Size / Content / (when applicable)
Origin / Care label :1/2 of WB
Size / Content /
Origin / Care label Print main label
price Clear swift sticker tag
1st belt loop (Back view)
Hangtag (when applicable)
Disclaimer tag
Bag end label placement
Polybag
Bag end label plmt (FOR BULK PACK ONLY) -to be placed 1” up from bottom and 1” over from right edge of front polybag
1”
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag
to expose the price sticker on top for easy scan pack
- When goods get to store and hang loosely - the hangtag “GH BASS” words will show on the outside
(in stock) (during packing)
PO label placement
Inside back view
1” below
waist seam
PO label
wearer’s left inside sideseam and 1” below from waist seam
Extra Button placement
Inside right front
1” Extra
1”
Button 1/4”
2nd extra btn
(where applicable
for pocket)
bag
December 2015
sss ss sss
ssss
ssss
ssss
ssss
sssss
ssss
ssss
ssss
ss
TRIMS PLMT FOR MEN - WOVEN TOP W/ INTERIOR YOKE & WITHOUT FABRIC PATCH
Ref code : GHML01 - Main label: should be centered at interior yoke. Sewn four sides old# BLP-118
- Size / Content / COO label / Care label: placed directly under the main label
- Hangtag: should be placed at the 2nd button (including the neck button)
and one side of the circular tack goes through the button hole - Disclaimer tag(when applicable): to be behind of hangtag
- Price sticker (when applicable): to be stuck to the back of hangtag Centerline
- Size sicker (when applicable): 1 1/2” up from bottom and 1 1/2” from right side of folded garment
- PO label: 3” up from bottom of wearer’s inside left side seam - Extra buttons: 1” and 2” up from bottom hem on the inside of the wearers
left side seam. Place the center of the Large button at this point. 1/2” Then, from the center of the small extra button to the center of
the large extra button, there is a 1" distance
*Remark: Polybag quality / thickness / ventilation holes, Size / Content / COO label
please refer to trimming layout Main label /Care label
(4 sides sewn)
Hangtag : price sticker Circular tack should be face down
The 2nd
button Hangtag placement :
placed at the 2nd button and
one side of the circ. tag goes
through the button hole Disclaimer Hangtag and then knotted
Price sticker placement
(When applicable)
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag
to expose the price sticker on top for easy scan pack
- When goods get to store and hang loosely - the hangtag “GH BASS” words will show on the outside
(in stock) (during packing)
PO label placement and Extra btn placement PO Label :
3” up from Extra button : 1" and 2” up from
bottom hem bottom hem on of wearer’s the inside of the inside left wearers
left side seam side seam
3“ 2”
1”
sssss
Size sticker placement
Size sticker
(when applicable) :
to be placed 1-1/2”
from btm & 1-1/2“
from right side of 1-1/2”
folded garment s
December 2015
sss ss sss
ssss
ssss
ssss
ssss
sssss
ssss
ssss
ssss
ss
TRIMS PLMT FOR MEN- WOVEN TOP W/ INTERIOR YOKE AND FABRIC PATCH
Ref code : GHML02
- Main label: should be centered on contract fabric patch at interior yoke Sewn four sides old# BLP-120
- Size / Content / COO label / CC label: placed directly under the main label - Hangtag: should be placed at the 2nd button (including the neck button) and one side of the circurlar tack goes through the button hole. Centerline
- Disclaimer tag(when applicable): to be behind of hangtag Contrast fabric patch
- Price sticker (when applicable): to be stuck to the back of hangtag - Size sicker (when applicable): 1 1/2” up from bottom and 1 1/2”
from right side of folded garment 1/2” - Extra buttons (when applicable): placed 1“ and 2” up from bottom hem on the inside of the wearers left side seam
- PO label: 3” up from bottom of wearer’s inside left side seam Main label
Size / Content / (4 sides sewn)
*Remark: Polybag quality / thickness / ventilation holes, :center of patch COO label / CC label please refer to trimming layout
Hangtag : price sticker
Circular tack should face down
The 2nd
button Hangtag placement : placed at the 2nd button and
one side of the string goes
through the button hole
and then knotted Disclaimer Hangtag
Price sticker placement (When applicable)
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag
to expose the price sticker on top for easy scan pack
- When goods get to store and hang loosely - the hangtag “GH BASS” words will show on the outside
(in stock) (during packing)
PO label placement and Extra btn placement PO Label :
3” up from Extra button : 1" and 2” up from
bottom hem bottom hem on of wearer’s the inside of the inside left wearers
left side seam side seam
3“ 2”
1”
sssss
Size sticker placement
Size sticker
(when applicable) :
to be placed 1-1/2”
from btm & 1-1/2“
from right side of 1-1/2”
folded garment s
December 2015
sss ss ssss
ssss
ssss
ssss
ssss
ssss
ssss
ssss
ssss
ss
TRIMS PLMT FOR MEN - KNIT TOP W/ PRINTED MAIN LABEL
Ref code : GHML03 Centerline
- Main label: 3/8” down from neck seam Main label old# BLP-136
- Printed main label (when applicable): PO & Care label should be at sideseam 3/8” (four side sewn)
- Size / Content / COO label: placed directly under the main label - Care label: back side of size / contect / COO label - Hangtag: to be through size/contect/COO label or 1“ from neck seam - Disclaimer tag(when applicable): to be behind of hangtag - Price sticker (when applicable): to be stuck to the back of hangtag
- Size sicker (when applicable): 1 1/2” up from bottom and 1 1/2”
from right side of folded garment
- Care label: 3” up from bottom of wearer’s inside left side seam Hangtag : price sticker
- PO label: sewn into wearer’s left seam 3” up from bottom hem should be face down Size / Content / COO label
and underneath of care label *Remark: Polybag quality / thickness / ventilation holes,
please refer to trimming layout Centerline
Hangtag placement
1” from neck seam 3/8” Printed Main label
Disclaimer Hantag
(when applicable)
Hangtag
M
INSIDE BACK BODY Printed
Main label Disclaimer Hangtag
Price sticker placement
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag to expose
the price sticker on top for easy scan pack - When goods get to store and hang loosely - the hangtag
“GH BASS” words will show on the outside
(in stock) (during packing)
Care / PO label placement
care label
PO label
3“
sssss
Care label: 3” up from bottom hem of wearer’s inside left side seam
PO label: underneath of care label (when use printed main label)
Size sticker placement
Size sticker
(when applicable) :
to be placed 1-1/2”
from btm & 1-1/2“
1-1/2” from right side of
s folded garment
December 2015
sss ss sss
ssss
ssss
ssss
ssss
sssss
ssss
ssss
ssss
ss
TRIMS PLMT FOR MEN- KNIT TOP W/ MAIN LABEL WITH TWINE HANGTAG (POLO NECK)
Ref code : GHML04
- Main label: 1/2” down from neck seam old# BLP-74
- COO / Size label: set at bottom of main label - CC label: Back side of the Size / Content / Origin label - Hangtag: placed at the 2nd button and circular tack goes through the button hole
- Price sticker (when applicable): to be stuck to the back of hangtag 1/2” - Disclaimer tag(when applicable): to be behind of hangtag
- Size sicker (when applicable): 1 1/2” up from bottom and 1 1/2”
from right side of folded garment - PO label: 3” up from bottom of wearer’s inside left side seam - Button bag (when applicable): to behind the hangtag
Main label COO/
*Remark: Polybag quality / thickness / ventilation holes, (2 lockstitched) Size / Care label
please refer to trimming layout
Disclaimer Hangtag
The 2nd
button Hangtag placement : Hangtag: price sticker
should face down placed at the 2nd button and
tag goes through
button hole and is then
knotted
Price sticker placement
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag
to expose the price sticker on top for easy scan pack
- When goods get to store and hang loosely - the hangtag “GH BASS” words will show on the outside
PO label placement
and Extra btn placement PO Label :
3” up from Extra button : 1" and 2” up from
bottom hem bottom hem on of wearer’s the inside of the inside left wearers
left side seam side seam
3“ 2”
1”
sssss
Size sticker placement
Size sticker
(when applicable) :
to be placed 1-1/2”
from btm & 1-1/2“
from right side of 1-1/2”
folded garment s
(in stock)
(during packing)
December 2015
I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I
sss ss sss
ssss
ssss
ssss
ssss
sssss
ssss
ssss
ssss
ss
TRIMS PLACEMENT FOR MEN - FOR KNIT&SWEATER TOP W/ HANGTAG
Ref code : GHML05
- Main label: 1/2” down from neck seam old# BLP-88
- COO / Size label / CC label: set at bottom of main label - Hangtag: to be attached to the loop of the size/content/origin label
- Disclaimer tag(when applicable): to be behind of hangtag INSIDE BACK VIEW - CC label: Back side of the Size / Content / Origin label - Price sticker (when applicable): to be stuck to the back of hangtag - Size sicker (when applicable): 1 1/2” up from bottom and 1 1/2” Centerline
from right side of folded garment - PO label: 3” up from bottom of wearer’s inside left side seam - Extra button bag: btn size is bigger than 24 ligne, please use button bag
*Remark: Polybag quality / thickness / ventilation holes, please refer to trimming layout
1/2” Button bag
FRONT VIEW Main label (if the size is (sewn 2 sides) bigger than 24 Ligne)
: behind hangtag
Size / COO label CC label on the back side
Hangtag: Disclaimer Hangtag price sticker
should face down
Price sticker placement
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag expose
the price sticker on top for easy scan pack - When goods get to store and hang loosely - the hangtag
“GH BASS” words will show on the outside
PO label placement
PO Label :
3” up from
bottom hem
or rib seam’
of wearer’s
inside left
side seam
3“
sssss
Size sticker placement
Size sticker
(when applicable) :
to be placed 1-1/2”
from btm & 1-1/2“
from right side of
s folded garment
(Front view) 1-1/2”
(in stock)
(during packing)
December 2015
sss ss sss
ssss
ssss
ssss
ssss
sssss
ssss
ssss
ssss
ss
TRIMS PLACEMENT FOR MEN’S - FOR SWEATER TOP - SIDE SEWN MAIN LABE L
Ref code : GHML06 - Main label: 1/2” down from neck seam - Size/content/COO label: set at bottom of main label - Hangtag: to be attached to the loop of the size/content/origin label - CC label: Back side of the Size / Content / Origin label - Disclaimer tag(when applicable): to be behind of hangtag - Price sticker (when applicable): to be stuck to the back of hangtag
- Size sicker (when applicable): 1 1/2” up from bottom and 1 1/2” 1/2” from right side of folded garment
- PO label: 3” up from rib seam of wearer’s inside left side seam - Extra buttons (when applicable): placed 1“ and 2” up from
rib saem on the inside of the wearers left side seam
*Remark: Polybag quality / thickness / ventilation holes,
please refer to trimming layout Main label (2side sewn)
Size / Content / COO label / Card label
Hangtag :
price sticker
should face down
Centerline
Disclaimer Hangtag
old# BLP-100
Price sticker placement
Price sticker
Back view of Hangtag
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag to expose
the price sticker on top for easy scan pack - When goods get to store and hang loosely - the hangtag
“GH BASS” words will show on the outside
(in stock) (during packing)
PO label placement
Extra button : PO Label : 1”and 2” up from
3” up from rib seam on the inside of the
rib seam wearers of wearer’s left side seam
inside left
side seam
3“ 2”
1”
sssss
Size sticker placement
Size sticker
(when applicable) :
to be placed 1-1/2”
from btm & 1-1/2“
1-1/2” from right side of
s folded garment
December 2015
zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
TRIMS PLMT FOR MEN - DENIM BOTTOM WITH POCKET BAG & MAIN LABEL AND JOKER, FLASHER
Ref code : GHML07
- Main label: attached at CB waistband old# BLP-140
- Size / Content / Origin / Care label (when applicable): Set at bottom of waistband. - Joker tag (when applicable): stitched to the wearer’s right back waistband by sewing thread and place 1/2 of WB - Price sticker (when applicable): to be stuck to the joker tag - Pocket flasher (when applicable): stitched to the wearer’s right back pocket by sewing thread - Size strip (when applicable): to be placed 7 1/2” down from bottom of waistband and 1“ from the side of wearer’s right side - Hangtag (when applicable): to be swift tack through the size / content / COO label / CC label - Disclaimer Tag (when applicable): Use 3” plastic pin to tack on right side seam. Placement is about 1” below waist seam. - Printed Pants name: 2 1/2” from wearers right edge - One extra buttons per size must be sewn on the wearer’s right pocket bag as illustrated
Joker tag & Hangtag & Size Strip *Remark: Polybag quality / thickness / ventilation holes, please refer to trimming layout
Main Label Joker tag (when
Centerline (2 side sewn) applicable): 1/2” of WB Printed Main Label Placement (when applicable) Price sticker Pocket
flasher
Centerline Size / Content / (when 1” applicable)
Size / Content / Origin / Origin / Care label
Care label Disclaimer Tag
7-1/2” (when applicable)
Print main label
1”
Size strip (when . Hangtag (when applicable) applicable)
Bag end label placement
Polybag
Bag end label plmt (FOR BULK PACK ONLY) -to be placed 1” up from bottom and 1” over from right edge of front polybag
1”
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag
to expose the price sticker on top for easy scan pack
- When goods get to store and hang loosely - the hangtag “GH BASS” words will show on the outside
(in stock) (during packing)
Care label placement
Inside back view
1-1/2”
below
seam Care Label
(when
applicable
)
Extra Button placement
Inside right front
1” Extra
1”
Button 1/4”
2nd extra btn
(where applicable
for pocket)
bag
December 2015
zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
TRIMS PLMT FOR MEN - WOVEN BOTTOM W/ MAIN LABEL
Ref code : GHML08
- Main label: attached at CB waistband old# BLP-03
- Size / Content / Origin / Care label(when applicable): Set at bottom of waistband. place care label at inside wearer’s left side seam - Joker tag (when applicable): stitched to the wearer’s right back waistband by sewing thread. Place 1/2 of WB - Price sticker (when applicable): to be stuck to the joker tag - Pocket flasher (when applicable): stitched to the wearer’s right back pocket by sewing thread - Size strip (when applicable): to be placed 7 1/2” down from bottom of waistband and 1“ from the side of wearer’s right side
- Disclaimer Tag / Hangtag (when applicable): Use 3” plastic pin to tack on right side seam (same side for the joker).
Placement is about 1” below waist seam. - Printed Pants name: 2 1/2” from wearers right edge - One extra buttons per size must be sewn on the wearer’s right pocket bag as illustrated
*Remark: Polybag quality / thickness / ventilation holes, please refer to trimming layout Joker tag & Size Strip
Main Label (2sides sewn) Joker tag (when
Centerline applicable): 1/2 of WB
Printed Main Label Placement (when applicable) Price sticker Pocket flasher
Centerline Size / Content / (when 1” applicable)
Size / Content / Origin / Origin / Care label
Care label Disclaimer Tag /
7-1/2” Hangtag (when
applicable)
Print main label
Clear swift 1”
tag Size strip (when . applicable)
Hangtag
(when applicable)
Bag end label placement
Polybag
Bag end label plmt (FOR BULK PACK ONLY) -to be placed 1” up from bottom and 1” over from right edge of front polybag
1”
For packing - Hangtag sequence : - When vendor packs into polybag he will twist tag
to expose the price sticker on top for easy scan pack
- When goods get to store and hang loosely - the hangtag “GH BASS” words will show on the outside
(in stock) (during packing)
PO label placement
Inside back view
1-1/2”
below
seam PO Label
(when
applicable)
Extra Button placement
Inside right front
1” Extra
1”
Button 1/4”
2nd extra btn
(where applicable
for pocket)
bag