trigger an · pdf filewe’re going to trigger an impulsetm task force tips new impulsetm...

800-348-2686 • www.tft.com • [email protected]

More information inside ...

Trigger an IMPULSETM

More information inside ...

Tired of repairs and downtime due to Integrated

Intake Valve Failures?

Today, you have an alternative.

We’re Going to Trigger anIMPULSE TM

Task Force Tips New

IMPULSETM

Trigger Valve System

Is Available On

A Wide Range Of

Nozzle Configurations



trigger valve system

Task Force Tips has never been afraid to challenge the status quo of initial attack firefighting.

The revolutionary IMPULSETM trigger valve system can now be integrated into many of TFT’s highest performing firefighting nozzles as an option.

Ultimatic Series of Automatic Nozzles

Patent Pending

METRO 0 Series of Fixed Gallonage Nozzles

MidMatic Series of Automatic Nozzles

METRO 1 Series of Fixed Gallonage Nozzles

MidForce Series of Dual Pressure Automatic Nozzles


If you are tired of the expense, downtime and repairs associated with the failure of pump integrated intake valves ... well, TFT has a cost effective alternative for you.

TFT’s unique half-ball valve design not only provides maximum flows with little loss, but can be easily removed for repair and inspection without the apparatus being removed from service.

With three distinct styles, and dozens of models to choose from, our remotely controlled configurations are an ideal and cost effective choice over integrated pump intake valves. Ball Intake Valve

• Swiveling Inlet Prevents Unwanted Hose Kinks• Corrosion Resistant Stainless Steel Ball Design• All Wiring and Control Included


Jumbo Ball Intake Valve• Lowest Loss Of Any Jumbo Intake Valve• Easily Removed For Repair Or Replacement• Integrated High Flow Relief Valve

Low Profile Ball Intake Valve• Most Compact High Flow Intake Available• 10-year Warranty Against Corrosion• Integrated Drain and Air Bleed Valve

��

��

YEAR WA RRAN

TY

Panel Mounted Control


Hemisphere™ Transportable MonitorThe Hemisphere™ is a versatile, light-weight and quickly deployed transportable monitor that gives the user the ability to rapidly establish fire flows in locations that traditional ground monitors cannot.

New Flex Clamp Extends Reach of Hemisphere™ Transportable MonitorThe new lightweight Flex Clamp design allows TFT’s exclusive HemisphereTM transportable monitor to be easily and safely attached to round objects as large as 6 feet in circumference. Tactically, the ability to mount and use a

500 gpm monitor on a pole, tree, barrier, or any other oddly shaped object offers unheard of performance. The new Flex Clamp can be securely placed into service with a single operator using an exclusive and very unique chain clamp system. Combined with the other

clamping models available for the HemisphereTM, there are very few operational situations that cannot be quickly and safely contained with the hard hitting and far reaching stream of the HemisphereTM.

HemispHere™

500 gpm


The Hemisphere™ Attaches To Almost AnythingFrom I-beams to scaffolding to stairway railings to trailer hitches, the HemisphereTM transportable monitor attaches quickly and securely. Big water where you want it and when you need it ... safely.

HemispHere™

I-Beam Clamp

Model HPM-A

Model HPM-H

Tank Lip Clamp

Model HPM-F

Scaffolding Clamp

Model HPM-G

Quick release chains store and deploy from durable canvas bags.

Cross Pin Mount allows adaptability in attaching the Monitor across the length of the Spine.

Two uniquely engineered clamping mechanisms make for easy insertion of chains and a rock-solid grip.

Flex Clamp

PA2 Distributor Nozzle System Increases Transformer’s VersatilityThe Transformer PA1 Piercing Nozzle System and the PA2 Piercing and Distributor Nozzle systems are designed to be quickly and easily configured to deliver water or foam solution into areas that are either inaccessible or unsafe for initial attack crews to enter. Comprised of interlocking components, the system provides flows up to 150 gpm, includes an integral rotational shutoff valve, and is stored in a compact nylon carrying bag.

The new PA2 system includes everything in the PA1 package -- twist-grip shutoff valve, 3 port junction block with striking head, 2 extension tubes, flow tube with hardened steel piercing point -- then adds a pistol grip, a unique distributor nozzle that provides a wide fully filled pattern, and an adapter allowing the distributor nozzle to be used on any 1 1/2” NH threaded hoseline.

PA2

PA14 Hardened

Steel Piercing Point

PA26 Distributor

Head



PA2 Example Configurations

PA2 Includes: 2 - 19” (48 cm) Extension Tubes, 1 - 14” (36 cm) Flow Tube with Piercing Point, Twist-Grip Shutoff Valve, Pistol Grip, 3 Port Junction Block with Striking Head, Distribution Nozzle, Adapter, and Nylon Carry Bag

Inside the PA2 Carrying Bag


The Ultimate Monitor PackageIncorporating TFT’s 1500 gpm Typhoon manually controlled monitor and a ZO 1500 gpm industrial nozzle, with the exclusive oscillating boost valve, and the revolutionary hydrant under monitor manifold, multiple fire streams and water supply operations can be simultaneously managed quickly and simply.


Typhoon Monitor and NozzleThe uniquely configured 1500 gpm rated monitor is available with handwheel controls and incorporates a computer generated waterway design that maximizes stream quality and provides maximum reach. The ZO 1500 gpm fixed gallonage nozzle is perfectly matched to deliver a hard-hitting stream and if needed, a wide protective fog pattern.

Booster Oscillation ValveThe Booster provides a secondary supply inlet allowing pressure to be boosted to the monitor and nozzle for increased flow or reach, or foam solution to be added by a supporting apparatus. The optional oscillation mechanism allows user selected oscillation of the monitor for cooling, exposure protection or vapor mitigation and can be mounted directly to the H.U.M. or any 4” ANSI inlet flange.

Hydrant Under Monitor (H.U.M.)The H.U.M. adds two configurable full flow LDH discharge ports

to a dual slow-close valve design that can simultaneously or independently control the monitor and nozzle, or the LDH

ports. The high strength corrosion resistant aluminum alloy design fits securely to an ANSI 150 inlet

flange, and provides positive system shut off using a high volume, low friction loss quarter ball valve.


MasterStream 1250 Series with Flush without Shutdown Make Their DebutProducing a hard hitting and far reaching stream, as well as allowing easy pattern adjustability, this is the first TFT MasterStream series to integrate an externally operated flush capability without shutting the nozzle down. The external selector ring offers easy selection of flush setting during all flow operations with the automatic and fixed flow models, and gallonage selection and flush choice on the selectable gallonage models.

Automatic Series

• Choice of 300-1250 gpm or 300-1000 gpm flow ranges

• Exclusive operational pressure selection from 70 to 120 psi

• Accepts a low expansion foam attachment for increased foam performance

• Available with 2.5”, 3.0”, or 3.5” inlets

• Selector Ring allows Flush without shutting down the nozzle

Fixed Flow Series

• Factory Pre-set flows based on customer specification from a kFactor of 50 up to 130




Selectable Gallonage Series

• Flow selections of 500, 750, 1000, or 1250 gpm at 100 psi operational pressure

• Flow Limiting function assure maximum stream performance in each setting





New Digital Monitor DisplayNew back lit, digital displays are now available for all TFT remote control monitors. All three models, Panel Mount / Tether / Wireless, include an exclusive display for advanced systems feedback and a back lit control panel for improved visibility of controls in both low light and bright sunlight conditions.

NEW FoamJet MX-MD Series

• 4 Lever attachment mechanism is easy and secure

• Expanded flow path size allows increased foam expansion

• Nozzle pattern rotation provides multi-expansion performance

Developed for all Max Series and ZN industrial nozzles, this completely redesigned foam aspiration attachment now makes installation and removal easy and simple, even with a foamy gloved hand.

The increase in air entrainment though enlarged rear inlets and expanded overall flow path also improves TFT’s unique multi-expansion capabilities. With a simple pattern selection, maximum stream reach or maximum foam aspiration can be quickly chosen.

Max Series FoamJet Redesigned for Ease of Attachment and Multi-expansion Capabilities

OLD STYLE


1” BubbleCupTM Series• Choice of 10 and 24 gpm or

10 and 40 gpm dual gallonage flows

• Available in tip only, ball shutoff, and ball shutoff with color coded pistol grip configurations

• Ideal for low expansion Class A foam applications

1 ½” BubbleCupTM Series• Choice of 20 and 60 gpm or

20 and 95 gpm dual gallonage flows, or a 95 gpm single gallonage flow


• Ideal for low expansion Class A and AFFF foam applications

Redesign Improves Operational Performance of BubbleCupTM and QuadraCupWith a dramatic materials change from PVC to hard coat anodized aluminum, the entire BubbleCupTM and QuadraCup series will see improved impact resistance and expanded foam performance.

While functioning identically, the new aluminum heads will provide increased durability, and the addition of a new airflow path into the stream improves finished foam expansion.

Aspiration Sleeve Engaged



METRO “Zero” Nozzle Now Available

Completing the METRO fixed gallonage nozzles series, the new METRO “0” with its stainless slide valve, integrated debris screen and rugged design, offers user selected flows and pressures from 20 to 100 gpm @ 100psi.

The unique flow disc design adds to simplicity in fireground operations, and can be easily changed.

1 ½” QuadraCup Series• 30, 60, 95, or 125 gpm flow selections at either

75 psi or 100 psi operational pressures


• Ideal for low expansion Class A and AFFF foam applications



TFT resources

You’ll find everything you need at www.tft.com including:• Operational Manuals, Service

and Training Information• On-line Technical Library• On-line Catalog and

Product Search• Demo and Product Videos

Every product is backed by TFT’s:

• 24 Hour Service Program

• Five Year Warranty

• 24 Hour Technical Service and Support

Made In The USA

The Flanged Oscillating Monitor can be used for exposure protection, cooling, or any other situation where it is desirable

to have a monitor sweep back and forth. It is intended for mounting on fixed piping structures. The maximum flow rate

is 500 gallons per minute.

The oscillating mechanism is driven by a turbine wheel. A worm gear drive reduces the speed and increases the torque

of the turbine wheel. A simple crank mechanism makes the outlet of the oscillating monitor and

the nozzle attached to it move back and forth.

The Oscillator operates between 20 degrees either side of center, and the monitor is

adjustable to 90 degrees up and 45 degrees down relative to the flange. The sweep

can be set for a 20, 30, or 40 degree sweep. The speed of the oscillator is a function of the flow rate. The oscillating mechanism can be disengaged and the stream can be aimed manually.

Flanged Oscillating Industrial Monitor

A Closer Look At the Oscillator and Controls

trigger an · pdf filewe’re going to trigger an impulsetm task force tips new impulsetm...

Documents