trend micro serverprotect for linux. system requirements hardware(for 1.3, 1.25, 1.2) –intel™...
TRANSCRIPT
Trend Micro Trend Micro ServerProtect For ServerProtect For
LinuxLinux
System Requirements
• Hardware(For 1.3 , 1.25, 1.2)– Intel™ Pentium™ II processor (or higher) or AMD™ Athlon™ processor– • 128MB RAM or more– • 25MB of available disk space for the /opt directory– • 8MB of available disk space for the /tmp directory
• Supported distributions and kernels– Red Hat Enterprise Linux (AS, ES, WS) 2.1 1.25
• Note : ServerProtect in kernel-independent mode is the mode supported for thesedistributions. Therefore, only manual and scheduled scanning is available.
– Red Hat Enterprise Linux (AS, ES, WS) 3.0 1.3• 2.4.21-4.EL smp• 2.4.21-4.EL up• 2.4.21-9.0.1.EL smp• 2.4.21-9.0.1.EL up• Note :For other kernels and distributions, refer to the following Web site for additional
information: www.trendmicro.com/en/products/file-server/sp-linux/use/kernel.htm
– SUSE LINUX Enterprise Server 1.2• SUSE LINUX Enterprise Server 8 for z/Linux - 2.4.19-3suse
• IBM S/390– IBM S/390 Multiprise 3000 Enterprise Server (MP3000) 7060– IBM Parallel Enterprise Server G5 (G5) 9672 – IBM Parallel Enterprise Server G6 (G6) 9672 –
• IBM zSeries– - IBM eServer zSeries 800 (z800) 2066 – - IBM eServer zSeries 900 (z900) 2064
– Turbolinux 10 Server • 2.6.8-1 up• 2.6.8-1 smp
– Asianux 1.0 • 2.4.21-9.30AX up • 2.4.21-9.30AX smp
– Miracle Linux 2.1 • 2.4.9-31.22ml up• 2.4.9-31.22ml smp
• Supported Web browsers for ServerProtect Web console– Microsoft™ Internet Explorer 5.5 with Service Pack 2 or higher
– • Mozilla 1.4 or higher
– Note: Install Sun Micro™ Java™ 2 Runtime Environment 1.4.2_01 when using
Mozilla to access ServerProtect Web console. Otherwise, product registration
and access to the ServerProtect online help will not work.
– Note : The libgcc-3.2.2-5.i586.rpm (or above) package should be installed.
Otherwise, accessing the ServerProtect Web console via a Mozilla browser
will not work.
• Supported XWindow graphical desktop environments for simple GUI console– KDE 2.2.2-2 or higher
InstallInstall
解開 splx-redhat-v13.gztar –zxvf splx-redhat-v13.gz
解開 splx-redhat-v13.gz可以看到下列檔案
SPLX_1.3_GSG_RedHat.pdfSPLX_1.3_README_Redhat.txt
SProtectLinux-1.3.RedHat.i686.binMD5SUM
執行安裝程式./Sprotectlinux1.3.RedHat.i686.bin
License AgreementLicense Agreement
Active ProductActive Product
可以用 Ctrl + D 放棄啟動可以繼續安裝
使用 uname –a 找出Kernel 的版本
下載適當的 Kernel Hook
將下載的 Kernel Hook解壓,複製到
/opt/TrendMicro/SProtectLinux/SPLX.module/
將 splx的服務重新啟動#Service splx restart
Install CompleteInstall Complete
http://FQDN:14942
Verifying Installation
• After completing the installation, verify that ServerProtect is running optimally.
• To verify ServerProtect is running optimally, type the following at the command line:– /etc/init.d/splx status– The output should show all running processes, for example:– splxmod module is running...– vsapiapp (pid 3854 3852 3851 3850 3849 3840) is running...
– entity (pid 3845 3844) is running...– ServerProtect for Linux core is running– splxhttpd (pid 3869 3868 3867 3866 3865 3864) is running...
– ServerProtect for Linux httpd is running
• If a service appears as "stopped", review the installation process.
Removing ServerProtect
• To remove ServerProtect:– Type the following at the command line:
•rpm -e SProtectLinux
Configuration
不需密碼可直接登入
Real-Time Scan
Scheduled Scan
Manual Scan
Exclusion List
Quarantine Directory
Backup Director
Recipents
Alert Settings
Update
Log
Administration
Registration
Thanks