transit - haldex · model isc & isl engine description 8.3 liters mfg ... cummins isc & isl...

› LIKE-NU® REMANUFACTURED PRODUCTS

› HALDEX AIR DRYERS

GeminiMDxTM Dual Dryer System

DRYest®

› COMPETITIVE AIR DRYERS/CARTRIDGES

› HALDEX ACTUATORS

Gold Seal® and Life Seal®

MAXIBRAKE® Spring Brakes

› HALDEX AUTOMATIC BRAKE ADJUSTERS

› HALDEX SUSPENSION PRODUCTS

› HALDEX FRICTION MATERIALS

TransitmaXTM High Performance

PROSteelTM Plus

www.haldex.com

L20720 Rev. 5-16

Transit Quick Reference Catalog

L20720 Cover 5-16_Layout 1 5/31/2016 11:19 AM

Important Notice

The products described within this literature, including without limitation, product features, specifications,designs, availability and pricing are subject to change by Haldex and its subsidiaries at any time without notice.

This document and other information from Haldex, its subsidiaries and authorized distributors provideproduct and/or system options for further investigation by users having technical expertise. It is importantthat you analyze all aspects of your application and review the information concerning the product or system, in the current literature or catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through their own analysis and testing, is solely responsible formaking the final selection of the products and systems and assuring that all performance, safety and warning requirements are met.

L20720 Cover 5-16_Layout 1 5/31/2016 11:19 AM

Table of Contents Page

Like-Nu® Remanufactured Compressors, Governor, ..............................................................2 - 4Head Assemblies

Like-Nu® Remanufactured Water Pumps ....................................................................................4

Like-Nu® Remanufactured Delco Starter .....................................................................................5

New Delco Brushless Alternators ..................................................................................................5

Electrical - Stoplight Switch, Single Terminal ...............................................................................5

GeminiMDxTM Manifold Dual Dryer -- High Capacity Drying System ..........................................6

PURest® and DRYest® Air Dryers, Service Kits .........................................................................7-9

Haldex MTC Dessicant Cartridges ...............................................................................................10

Automatic Drain Valves (ADV), Manual Drain Valve, Service Kits .......................................10-11

CONSEP® Condenser/Separator, Service Kits ........................................................................11-12

Bendix® Style AD-9 and AD-IP Air Dryers ..................................................................................13

Competitive Desiccant Cartridges ...............................................................................................13

Reservoirs......................................................................................................................................13

New/Like-Nu® Remanufactured Bendix® Air Dryer Repair Kits...............................................14

Haldex Air Valves, Bendix® Air Valves...................................................................................14-17

Haldex Service Chambers.............................................................................................................18

Haldex Gold Seal® Actuators ......................................................................................................18

Haldex Life Seal® Actuators........................................................................................................19

MAXIBRAKE® Spring Brakes, Service Kits ..................................................................................19

Actuator/Spring Brake Replacement Parts .................................................................................20

Haldex Automatic Brake Adjusters .............................................................................................20

Suspension Products ...............................................................................................................21-23

Like-Nu® Remanufactured Hydraulic Brake Calipers ................................................................23

Grey-Rock® RSD Compliant Friction Material.......................................................................24-25

Grey-Rock® Friction Products ................................................................................................26-29

TransitmaXTM High Performance Friction Material ...............................................................30-37

PROSteelTM Plus .......................................................................................................................38-39

Like-Nu® Remanufactured Carrier Air Conditioning Compressors ..........................................40

Table of Contents

Page 1

Copyright 2016Haldex Brake Products Corporation

10930 N. Pomona AvenueKansas City, MO 64153

All rights reserved.Materials may only be reproduced with written permission of Haldex.

L20720 Transit Catalog PG 1-10_Layout 1 5/31/2016 10:43 AM Page 1

Like-Nu® Remanufactured Compressors / Head Assemblies

Page 2

PART # 5012895XModel BA922 Flange MountDescription Detroit Diesel Series 60 EGR Air Inlet TopAir Outlet Top Notes Water/Air Cooled; 63 Tooth Drive Gear with 21 Tooth Spline

PART # 9111530130XModel SS318Description Transit 13 Tooth Rear Spline Bore Size 85MMWater Port 3/4” - 16 Straight Thread O-Ring Discharge Port M27 - 2.0 Straight Thread O-RingGovernor Port M10 - 1.0 Straight Thread O-RingHead Assembly 9111539202X

BEN

DIX

® C

OM

PRES

SOR

PART # 3558189XModel QE338CDescription Cummins C-Series, 11 Tooth Air Inlet FrontAir Outlet Rear Notes Quiet Economy Single Cylinder CU

MM

INS

COM

PRES

SOR

PART # 9111530040XModel SS318Description Cummins ISC, 13 Tooth, Thru Drive Bore Size 85MMWater Port 3/4” - 16 Straight Thread O-Ring Discharge Port M27 - 2.0 Straight Thread O-RingGovernor Port M10 - 1.0 Straight Thread O-RingHead Assembly 9111539202X

WA

BCO

CO

MPR

ESSO

R

WA

BCO

CO

MPR

ESSO

R

PART # 9111530147XModel SS318Description Cummins ISB Bore Size 85MMWater Port 3/4” - 16 Straight Thread O-Ring Discharge Port M27 - 2.0 Straight Thread O-RingGovernor Port M10 - 1.0 Straight Thread O-RingHead Assembly 9111549202X

PART # 9111530197XModel SS318Description Cummins QSX/ISX Bore Size 85 MMWater Port M18 - 1.5 Straight Thread O-Ring Discharge Port M27 - 2.0 Straight Thread O-RingGovernor Port M10 - 1.0 Straight Thread Head Assembly 9111539212X

WA

BCO

CO

MPR

ESSO

R

WA

BCO

CO

MPR

ESSO

R

Product PhotoNotAvailable


Like-Nu® Remanufactured Compressors / Head Assemblies (cont’d)

Page 3

PART # 9111545000XModel SS250Description Cummins B Series Bore Size 75MMWater Port 3/4” - 16 Straight Thread O-Ring Discharge Port M27 - 2.0 Straight Thread O-RingGovernor Port M10 - 1.0 Straight Thread O-RingHead Assembly 9111539202X

WA

BCO

CO

MPR

ESSO

R

PART # 9111539202XModel SS318Description WABCO Head Assembly - CumminsBore Size 85MMWater Port 3/4” - 16 Straight Thread O-Ring Discharge Port M27 - 2.0 Straight Thread O-RingGovernor Port M10 - 1.0 Straight Thread O-Ring

WA

BCO

HEA

D A

SSEM

BLY Application:

9111530040X9111531030X9111535207X9111545000X

PART # 9111539212XModel SS318Description WABCO Head Assembly - CumminsBore Size 85MMWater Port M18 - 1.5 Straight Thread O-Ring Discharge Port M27 - 2.0 Straight Thread O-RingGovernor Port M10 - 1.0 Straight Thread O-Ring

WA

BCO

HEA

D A

SSEM

BLY

PART # 9111549202XModel SS318Description WABCO Head Assembly - CumminsBore Size 75MMWater Port 3/4” - 16 Straight Thread O-Ring Discharge Port M27 - 2.0 Straight Thread O-RingGovernor Port M10 - 1.0 Straight Thread O-Ring

WA

BCO

HEA

D A

SSEM

BLY Application:

9111530147XApplication:9111530197X9111535100X

85MM Head Assembly Kits Contain: New lower head assembly, new gaskets and bolts, with remanufactured upper head assembly.

PART # 9111535207XModel SS318Description Cummins L, M, N Bore Size 85 MMWater Port 3/4” - 16 Straight Thread O-Ring Discharge Port M27 - 2.0 Straight Thread O-RingGovernor Port M10 - 1.0 Straight Thread O-RingHead Assembly 9111539202X

WA

BCO

CO

MPR

ESSO

R

PART # 9111535100XModel SS318Description Cummins ISX Bore Size 85MMWater Port M18 - 1.5 Straight Thread O-Ring Discharge Port M27 - 2.0 Straight Thread O-RingGovernor Port M10 - 1.0 Straight Thread O-RingHead Assembly 9111539212X

WA

BCO

CO

MPR

ESSO

R


· Direct compressor or remote mount· 1/8-27 NPT ports· .336 Diameter mounting holes· Cut-in pressure of 105 PSI normal· Cut-out pressure of 130 PSI normal

PART # KN18530

· Operates in conjunction with the compressor unloader mechanism· Automatically controls the air pressure in the air supply system between the desired predetermined maximum and minimum pressure

PIST

ON

TYP

E G

OVE

RNO

R New Governor

Like-Nu® Remanufactured Water Pumps

Page 4

PART # RW4068XModel ISX EngineDescription 12 Groove PulleyMFG # 4089910Casting # 2201-10C

PART # RW4069XModel ISX EngineDescription 10 Groove PulleyMFG # 4026702Casting # 2201-10C

CUM

MIN

S IS

X

CUM

MIN

S IS

X

PART # RW6079XModel ISC & ISL EngineDescription 8.3 Liters MFG # 3804927, 3940052, 4089647(NX)Casting # 2370-10C

PART # RW6075XModel B & C Series EngineDescription 4 & 6 CylinderMFG # 3802358, 3802004Casting # 3913132

CUM

MIN

S IS

C &

ISL

CUM

MIN

S B

& C


Like-Nu® Remanufactured Delco Starter

New Delco Brushless Alternators

Page 5

PART # RS142000XDescription DELCO 42MT Starter Voltage 24Rotation Clockwise

Pinion Teeth 11Switch Position 308°Delco Reman # 10461068

· Recommended for most on- and off-road heavy duty vehicles· Gasoline engines from 9.8 to 26.2 Liters· Diesel engines from 6.6 to 14.8 Liters· Length - 18 Inches

· High Output - able to produce 68% of its rated power at engine idle; handles high electrical demands at low RPM

· High Output - able to produce 73% of its rated power at engine idle; handles high electrical demands at low RPM

Drop-in replacement for all of these cradle mount alternators:

Delco Remy Brushless50DN Oil Cooled8600191870007710459123

Penn Tex BrushlessPX-8 SeriesPX-833

· Dual Rotor Brushless Construction - extends life and increases durability· Air Cooled - eliminates oil lines, leaks and oil contamination· Clean Air Design - allows clean air to flow into the unit for superior reliability · High Efficiency - less engine power required for the electrical load results in lower fuel consumption· Long Life Bearings - high temperature bearings can withstand extreme belt loads in severe applications

Drop-in replacement for all of these cradle mount alternators:

Delco Remy Brushless50DN Oil Cooled860083870091

DELSTAR® Series 400HD Brushless HighOutput Alternator

PART # BE1040201

DELSTAR® Series 300HD Brushless HighOutput Alternator

PART # BE10030201

New and Like-Nu® Remanufactured Delco Oil Cooled Alternators

DELCO 50DN HeavyDuty Oil CooledAlternator

PART # NEW RA150001

PART # REMAN RA150001X

C.E. Neihoff BrushlessC700 SeriesC701

Exact replacement for all of these Delco 50DN belt driven,cradle mount alternators: 10459123, 8600191

· New and remanufactured for transit applications

Stoplight Switch Single Terminal

PART # BE20301 (OEM 230201)Hole Diameter .22” (2 holes)Mounting Center 1.37”Stud With Nut 3/8-16 ThreadInsulated Mounting Bracket; Unprotected

PART # BE13250 (OEM 3250)Actuation Pressure 3-5 PSIMounting Center Normally Open at 0 Pressure Design Single Pole/Two TerminalPole Size 1/4-18 NPT Silver Contacts; Snap Action Design to increaseswitch life; Tested at one million cycles at 30 AMPS


Haldex GeminiMDXTM Air Dryers

· Easy installation and removal

· Lightweight

· Only four major connections for fewer leak points

· Two-Year dryer service interval

· Standard service parts inventory

· Best “contaminant-free” system on the market today

PART # DA37013Dryer 24 Volt Heater Included Consep 12 Volt Heater IncludedSilenced Yes Drain Tube NoOEM Part # N4265ADNotes New Flyer Bus; CONSEP Bracket Left; OE Dual Bracket 300245DC

Dua

l 24V

Dry

ers/

Sing

le 1

2V C

ON

SEP

PART # DA37100Dryer 24 Volt Heater Included Consep N/ASilenced No Drain Tube YesOEM Part # N4265ABNotes Nova Bus

PART # DA37011Dryer 24 Volt Heater Included Consep 12 Volt Heater IncludedSilenced Yes Drain Tube NoOEM Part # N4265ACNotes CONSEP Bracket Left; OE Dual Bracket 300245DC

Dual

24V

Dry

ers/

Sing

le 1

2V C

ON

SEP

Dual

24V

Dry

ers

Dual

24V

Dry

ers

Dual

24V

CO

NSE

P

PART # DA37400Dryer N/AConsep 24 Volt Heater IncludedSilenced No Drain Tube YesOEM Part # N4265CFNotes -

PART # DA39100Dryer N/AConsep 24 Volt Heater IncludedSilenced No Drain Tube NoOEM Part # N4265CFNotes -



Haldex PURest® Air Dryer

· Multi-Treatment Cartridge employs 5 stages of cleaning to ensure dry system air· Universal mounting bracket eases retro-fit installations; fits Pure Air Plus, DRYest®, AD type and SS type air dryer bolt patterns· Integrated turbo protection· Built-in heater prevents freezing and damage to the dryer

PART # DA34110Heater 24 Volt Heater Included Inlet Port LeftBracket IncludedOEM Part # N4253AB

NOTES: Fits in 17 3/4” x 9 3/4” x 9 1/2” Envelope;This includes 1/2” clearance needed for desiccant cartridgechange

Haldex DRYest® Air Dryers

· Extended Service Air Dryer for System Purge Application· Multi-Treatment Cartridge employs 5 stages of cleaning to

ensure dry system air· Integrated turbo protection valve prevents loss of engine turbo· Extra compact size allows for easy installation anywhere· Integrated muffler allows for superior quiet operation· Fits in 12” x 6 3/4” x 6 3/4” envelope; this includes 1/2”

clearance needed for desiccant cartridge change

PART #

HeaterVoltage

SystemRegeneration

IntegratedGovernor

OEMPART # NOTES

470-20006 12 Volt No No N095847 For use with external purge tank

DA35100 12 Volt Yes No N4260 -

DA35110 12 Volt No No N4260B For use with external purge tank

DA35115 24 Volt No No N4260C For use with external purge tank

DA35205 24 Volt Yes Yes N4261A -

DA35215 24 Volt No Yes N4261C For use with external purge tank

DA35220 N/A No Yes N4261D For use with external purge tank

DA35230 24 Volt No Yes N4261F 9.3 BAR; Transit Application (MCI 04-10-1024)

DA35235 24 Volt No Yes N4261G 9.3 BAR; Transit Application (VOLVO 642150)

DA35315 24 Volt No No N4262C Drain Tube; Transit Application (NOVA BUS N44467)

DA35330 24 Volt No Yes N4262F 8.5 BAR; Transit Application

DA35335 24 Volt No Yes N4262G 10.0 BAR; Coastal Connector; Transit Application

DA35340 24 Volt No Yes N4262H 8.5 BAR; Transit Application (NOVA BUS N35224)

DA35415 24 Volt No Yes N4263C 8.6 BAR; Drain Tube; Transit Application

DA35430 24 Volt No Yes N4263F 9.0 BAR; Drain Tube; Transit Application (VOLVO 642070)

DA35435 24 Volt No Yes N4263G 9.0 BAR; Drain Tube; Transit Application (VOLVO 642111)


Haldex Air Dryer Service Kits

Page 8

PART # 4711002124 Volt Heater Kit includes Pigtail and Splice Connectors D

RYes

tTM24

V H

eate

r Ki

t

PART # 47110022Check Valve Assembly Kit

DRY

estTM

Chec

k Va

lve

PART # 47010001Purge Tank Kit includes: 6’ Hose,Brass Fittings, 4.5 Liter Tank D

RYes

tTMPu

rge

Tank

Kit

PART # 47110015Packard Electrical Connectorwith 12” PigtailD

RYes

tTMCo

nnec

tor

PART # 4711002012 Volt Heater Kit includes Pigtail and Splice Connectors D

RYes

tTM12

V H

eate

r Ki

tPART # 47177343Valve Kit Assembly with Integrated Governor (125 psi)471-77343

DRY

estTM

Valv

e Ki

t

PART # 47177434Regeneration Valve

DRY

estTM

Rege

n Va

lve

PART # 471-77484Outlet Check Valve Plug

DRY

estTM

Chec

k Va

lve

Plug

PART # 47177442Valve Kit Assembly; does not include Integrated GovernorD

RYes

tTMVa

lve

Kit

PART # 47178106External Turbo Protection Valve

DRY

estTM

Turb

o Va

lve

PART # 4717819924 Volt Heater Only

DRY

estTM

24V

Hea

ter

PART # 4717822312 Volt Heater Only

DRY

estTM

12V

Hea

ter

Assembled Unassembled


Haldex Air Dryer Service Kits (cont’d)

Page 9

PART # 47190995Dryer Valve Pack for Nova Bus

DRY

estTM

Valv

e Pa

ck

PART # 47190997Dryer Valve Pack for Prevost

DRY

estTM

Valv

e Pa

ck

PART # 471-78801Check Valve Assembly

DRY

estTM

Chec

k Va

lve

PART # 47189189Integrated Turbo ProtectionValve KitD

RYes

tTMTu

rbo

Valv

e

PART # 89332Valve Box for Prevost; 8.5 BAR

DRY

estTM

Valv

e Bo

x

PART # 93671Valve Box; 9.3 BAR

DRY

estTM

Valv

e Bo

x

PART # K041395KCheck Valve Kit

PURe

stTM

Chec

k Va

lve

Kit

PART # KN31529 (N1178EH)Pressure Relief Valve3/8” Thread Size200 PSI

PURe

stTM

Pres

s. Re

lief V

alve

PART # 47190361Safety Valve; 11 BAR

DRY

estTM

Safe

ty V

alve


Assembled Unassembled


Haldex DRYestTM Valve Cap

Haldex MTC Desiccant Cartridges

Page 10

PART # 47178964MTC Desiccant Cartridge KitIncludes mounting bolts, o-ring, bolt anti-seize lubricant;installation instructionsD

RYes

tTMM

TC C

artr

idge

PART # DQ6050Interchangeable, high performance Multi-Treatment CartridgeUses the five-stage cleaning system4-bolt slide in-and-out design allows for quick replacement whilestill on the vehicleIncludes mounting bolts, o-ring, bolt anti-seize lubricant; installation instructions

PURe

stTM

MTC

Car

trid

ge

PART # 47110024White Plastic Valve Cap

DRY

estTM

Valv

e Ca

p

· Length: 1/2” · Width: 1 1/2”· Depth: 3/4”· Weight: 0.2 lbs· OEM Part Number: 471-10024· Notes: Fits under MTC Cartridge in Dryest Air Dryer

PART # 41010019 Heated 12V

PART # 41010021 Heated 24V with Relay, Elbow and Butt Connector

PART # 410-10012 Heated 24V with Pigtail

PART # 410-10013 Heated 24V with Butt Connector

PART # 410-10014 Heated 12V with Relay and Packard Connector

PART # 410-10015 Heated 12V with Relay and Butt Connector

PART # 410-10018 Heated 12V with Relay, Elbow and Butt Connector

PART # 410-10040 Heated 24V with Drain Tube Kit

Haldex Automatic Drain Valve (ADV)

· Expels moisture with each brake application · Reduces possible build-up of harmful condensation and contaminates· Not dependent on compressor cycling· Built-in heater, standard on all valves· Prevents valve freeze-ups· Built-in filter, standard on all valves, protects against contamination· Optional relay switch and 90° fitting are included with each valve


PART # 41210026Port Sizes 1/2” - 14 NPTFRate Voltage & 12 Volt / 1 AMPPower Consumption Drain Capacity 1.3cc/purge @ 116 psi Mounting Position VerticalMax. Operating 290 psiPressureInlet Temperature -40°F to +175°FHeater Type 12 Volt

PART # 41210029Port Sizes 1/2” - 14 NPTFRate Voltage & 24 Volt / 0.5 AMPPower Consumption Drain Capacity 1.3cc/purge @ 116 psi Mounting Position VerticalMax. Operating 290 psiPressureInlet Temperature -40°F to +175°FHeater Type 24 Volt

PART # 412-1002512V CONSEP with Weather-Pack Connectors

PART # 412-1002824V CONSEP with Weather-Pack Connectors

PART # 412-1005024V CONSEP with Drain Tube Kit

PART # 412-1005424V CONSEP with Weather-Pack Connectorsand Drain Tube Kit

PART # 412-9279824VDC CONSEP; 1000mm cable; DIN 72585Connectors; Novabus with AMD Elec. Connection

Haldex Consep® Condenser/Separator

Page 11

· Removes oil, liquid and other contaminates prior to passage through the air system· Purges contaminants with each brake application· Reduces corrosion and possible failure of air system components caused by contamination· Substantially increases air dryer desiccant life expectancy· Includes Haldex Automatic Drain Valve (ADV)

Haldex Manual Drain Valve

PART # 12102 (OEM N3613H)

Profile Design High

Cable Option 24” Cable Closed Loop

PART # N3613BJ (OEM)

Profile Design High

Cable Option 10” Cable Closed Loop

· Manual wet or dry tank drain valve · Allows complete draining of reservoirs· 1/4” NPT (male) threads with sealant


Consep® and Automatic Drain Valve (ADV) Air Service Kits

Page 12

PART # 41189454Coil Repair Kit for 24 Volt ADV

Coil

Repa

ir K

it fo

r 24

V A

DV

PART # 41189455Coil Repair Kit for 12 Volt ADV

Coil

Repa

ir K

it fo

r 24

V A

DV

PART # 41092749Complete ADV for 24 Volt Consep® (41210029)A

DV

for

24V

Cons

ep®

PART # 41092750Complete ADV for 12 Volt Consep® (41210026)A

DV

for

12V

Cons

ep®

PART # 411-83400Timer Relay for 24 VoltADVA

DV

Tim

er R

elay

PART # 41071327Repair Kit for 12 Volt and24 Volt ADVA

DV

Repa

ir K

it

PART # 41178240 (OEM 411-78240) Drain Tube Kit for Consep®and ADVSide Outlet 3/4”Replaces Bottom Cover

Dra

in T

ube

Kit

PART # 41277322 (OEM 412-77322)Condenser Kit for 12 Volt and24 Volt Consep®

Kit includes O-Rings and plastic insert for condenser only

Cond

ense

r Ki

t



Remanufactured Bendix® AD-9 Air Dryers

Competitive Air Dryer Cartridges

Page 13

PART # Description

HeaterVoltage

HeaterWatts Supply DeliveryControl

· Desiccant type· Inline filtration system· Automatic drain valve which is controlled by the governor· Approximate Weight 28 lbs

109685X Reman Bendix® AD-9 Air Dryer 12 Volt 75 Watt 1/2” PT 1/2” PT 1/4” PT

Replaces 65225X

109688X Reman Bendix® AD-9 Air Dryer 24 Volt 75 Watt 3/4” PT 3/4” PT 1/4” PT

With Extended Purge Volume

PART # 107794XReman Bendix® Cartridgefor AD-9 Air Dryer BE

ND

IX®

AD

-9 C

artr

idge

PART # CART224 (NEW)New Chicago RawhideDesiccant Cartridge Ch

icag

o Ra

whi

de C

artr

idge

PART # 6524K (NEW)New Bendix® Cartridgefor AD-IP Air DryerBE

ND

IX®

AD

-IP C

artr

idge

PART # 109493XReman Bendix® Cartridgefor AD-IP Air DryerBE

ND

IX®

AD

-IP C

artr

idge

Reservoirs

PART # 417-10004 Reservoir Tank - 300 Cubic Inches

PART # 417-10006 Reservoir Tank - 420 Cubic Inches


New/Remanufactured Bendix® Air Dryer Repair Kits

Page 14

PART # Description Application

107798K NEW Minor Purge Valve Maintenance Kit for AD-9 Air Dryer 109685X, 109689X, 65224X

109494K NEW Delivery Check Valve Kit for AD-IP Air Dryer 109477X, 5000709X

5003547K NEW Purge Valve Repair Kit for AD-IP Air Dryer 109477X, 5000709XPurge Piston Retainer Shoulder Bolt Not Supplied. Must utilize old bolt whenrebuilding purge valve assembly.

5004338K NEW Purge Valve and Heater/Thermostat Repair Kit for AD-9 (24V) Air Dryer 65224X

5004342X REMAN Purge Valve Assembly (Soft Seat Purge) with 24V Heater for AD-9 Air Dryer 65605X

5005037K NEW Purge Valve Maintenance Kit (Major Hard Seat) for AD-9 Air Dryer 109685X, 109685HX, Purge Piston Retainer Shoulder Bolt Not Supplied. Must utilize old bolt when 65224X, 65647Xrebuilding purge valve assembly.

950013K Turbo Cut-Off Valve Kit for WABCO SS1200 Air Dryer 955205X, 955206X

950016K 24V Heater Kit for WABCO SS1200 Air Dryer 955206X, 955315X

K022105K Purge Valve Assembly Kit AD-IP/AD-IS (Dual U-Cup)

K041395K Check Valve Kit -

PART # 103010RXSupply (2) 3/4”Delivery (2) 1/2”Control (1) 1/4”Crack Pressure 4.0 PSI· Horizontal Mount· 1/8” balance port located under the exhaust cover· Controls spring brake sand service brakes· 2 Port Delivery

PART # 103028XSupply (1) 1/2”Delivery (4) 1/2”Control (1) 1/4”Crack Pressure 4.0 PSI· Horizontal Mount· 1/8” balance port located under the exhaust cover· Controls spring brake sand service brakes· 4 Port Delivery

BEN

DIX®

R-1

4 Re

lay

Valv

e

BEN

DIX®

R-1

4 Re

lay

Valv

e

Air Valves


HALD

EX F

lippe

r Sty

le V

alve

HALD

EX P

ush-

Pull

Host

ler V

alve

HALD

EX P

ush-

Pull

Park

ing

Brak

e

HALD

EX D

ual C

ircui

t Foo

t Val

ve

PART # KN20001 (OEM N13440DL)Handle Finish ChromeAll Ports 1/8”Mounting Holes #10-24 with 1.50” Centers· Panel or remote mount· Made of durable (EGC) Engineering Grade Composite· An on-off, non-automatic two position valve· Faceplates not included

PART # KN20010 (OEM N18AE)POP Pressure 25/40 PSIKnob Included N14514 PlainDelivery Port 1/4”Exhaust Port 1/4”· Panel or bulkhead mount· Requires 3/4” hole in dashboard· For in-cab applications

HALD

EX O

ne-W

ay C

heck

Val

ve

PART # KN23000 (OEM N13526AJ)Inlet/Outlet 1/2”Length 2.47”· Permits air flow in one direction only· Used wherever pressures must be isolated and not

allowed to flow back· Male-Female threaded· Use heavy duty models on compressor discharge· Use Repair Kit RN10CH

HALD

EX O

ne-W

ay C

heck

Val

ve

PART # OEM N13526HInlet/Outlet 1/2”Length 2.47”· Permits air flow in one direction only· Used wherever pressures must be isolated and not

allowed to flow back· Male-Female threaded· Use heavy duty models on compressor discharge· Use Repair Kit RN10CH

PART # KN22501 (OEM N30072HC)Pedal Angle 45°Valve Included KN22150· Dual circuit foot valve with pedal attached· An easy way to replace the entire assembly· Interchangeable with competitive models

Air Valves (cont’d)

Page 15

PART # KN20021 (OEM N20960)POP Pressure 35 +/- 10 PSIKnob Included KN20903All Ports 1/8” NPT· Controls parking/emergency brakes· Bulkhead mount, requires 7/8” mounting hole· Made of durable (EGC) Engineering Grade Composite· A better replacement for the PP-1· Knob, pin and mounting nut shipped with valve un-assembled



Page 16

PART # KN28032 (OEM N20950CA)Primary Balance 1/4”Supply 1/4”Control 1/4”Delivery 1/4”Mounting Centers 4.65” to 5.00”· Used with spring brake equipped truck or tractors· Complies with FMVSS-121 regulations eff. March 1998· Detects primary control line failure, allowing modulated

control of spring brakes· Interchangeable with competitive models· Available with Push-To-Connect (PTC) fittings

PART # KN28054 (OEM N30111E)Supply (2) 1/2”Delivery (2) 1/2”Control (2) 1/4”Primary Crack Pressure 4.6 PSISecondary Crack Pressure 9.6 PSI· Two Port Relay Valve with Anti-Compounding -

Dual Crack Pressure · Primary biased crack pressure· Replacing with single crack pressure valve not

recommended· Supplied with K202000 bracket; Use Repair Kit RN10JZ

HALD

EX In

vers

ion

Valv

e

HALD

EX 2

Por

t Ant

i-Com

poun

ding

HALD

EX 2

Por

t Ant

i-Com

poun

ding

HALD

EX 2

Por

t Int

egra

l Bra

cket

PART # KN28056 (OEM N30111H)Supply (2) 1/2”Delivery (2) 1/2”Control (2) 1/4”Primary Crack Pressure 4.6 PSISecondary Crack Pressure 9.6 PSISame characteristics as KN28054 except K202000 bracket is rotated 1/4 turn.

HALD

EX 2

Por

t with

Ant

i-Com

poun

d

PART # KN28071 (OEM N30100AD)Supply (2) 1/2”Delivery (2) 1/2”Control (2) 3/8” and 1/4”Crack Pressure 4.6 PSI· Relay Valve - Two Delivery Ports - with Anti-Compounding· Cover may be rotated without affecting performance or warranty· Built-in anti-compounding two-way check valve for spring

brake control· Includes bushings and plugs to match OEM production valves· Bracket available separately; Use Repair Kit RN10HK

PART # KN28060 (OEM N30096F)Supply (2) 1/2”Delivery (2) 3/8”Crack Pressure 4.6 PSIMounting 5/16” on 1 1/2” centers· Two Port Relay Valve with Single Control Line with Integral Bracket· 2 Port Delivery· Used to apply and release service brakes on tractor or trailer· Cover may be rotated without affecting performance or warranty

HALD

EX Tw

o-W

ay C

heck

Val

ve

PART # KN25090 (OEM N20966B) Inlet A 3/8” NPT (female)Inlet B 3/8” NPT (female)Outlet C 3/8” NPT (female)Outlet D 1/4” NPT (female)· Shuttle Type Two-Way Check Valve· Only mount horizontally· Interchangeable with most competitive models· Use when two valves must independently control

or supply one system· Use Repair Kit RN11W


HALD

EX A

ir Re

gula

ting

Valv

e

HALD

EX A

ir Re

gula

ting

Valv

e

HALD

EX Q

uick

Rel

ease

Val

ve

HALD

EX Q

uick

Rel

ease

Val

ve

PART # KN31040 (OEM N15817A)Inlet/Outlet 1/4” NPTFactory Pressure Setting 20 PSI· Adjustable Air Regulating Valve for Auxiliary System only; Not used in the brake system· Used in air systems where reduced pressure levels are required· Pressure setting are based on 100 PSI supply· Designed for constant supply, not on-off applications· Use Repair Kit RN17Y

PART # KN31041 (OEM N13680BZ)Inlet 3/8” NPTOutlet 1/4” NPTFactory Pressure Setting 50 +/- 5 PSI· Adjustable Air Regulating Valve with Factory PSI preset at

charted levels· Used in air systems where reduced pressure levels are required· Can be used with air assisted transmissions such as Fuller

RoadRanger or Spicer

Valv

e Re

pair

Kit

PART # RN10JZ

· Two Port with Anti-Compounding Dual Crack Pressure Valve Repair Kit

· Applications: KN28054 and KN28055

PART # KN32005 (OEM N20959HA)Inlet 3/8” Delivery 3/8”Crack Pressure 0· Use wherever a quick release function is required in the air

brake system· Made of durable (EGC) Engineering Grade Composite· Corrosion and weather resistant· Utilizes an oil resistant diaphragm for longer life

PART # KN32011 (OEM N20959MA)Inlet 1/2” Delivery 3/8”Crack Pressure 0· Use wherever a quick release function is required in the air

brake system· Made of durable (EGC) Engineering Grade Composite· Corrosion and weather resistant· Utilizes an oil resistant diaphragm for longer life


Page 17

HALD

EX In

-Lin

e Fi

lter

PART # KN31026 (OEM N10083K)· Filter for Pressure Protection Valve· 1/4” Female Port· 1/4” Male Port


Haldex Service Chambers

Page 18

· Steel Pressure Housing; Powder coated with resistance welded air ports · World Class Diaphragm; High quality rubber compound, resistant to heat and cold; Superior flexibility even at -40°F · Sturdy Service Housing; Powder coated for corrosion resistance; Flat bottom with 10 gauge steel · Orange Alert® Stroke Indicator · Self-Piloting Dust Shield

Steel Pressure Housing

World Class Diaphragm

Barrel Return Spring

Sturdy Steel Stud Housing

Haldex Gold Seal® Actuators

PART #SC24Type 24Available Stroke 2.25”

PART #1624015GP1624 Piggyback Chamber/Actuator

PART #1373030121Combination - Size 3030Long Stroke - Square BossesNew Flyer (Center Axle)

PART #1373030122Combination - Size 3030Long Stroke - Square BossesNew Flyer (Center Axle)

PART #1393030266Combination - Size 3030

PART #1393030267Combination - Size 3030

PART #GC3030Combination - Size 3030

PART #GC3030LCombination - Size 3030Long Stroke - Square Bosses

PART #GC3636Combination - Size 3636

· Superior Power Spring Technology; Advanced power coating process; Resists corrosion and fatigue· Double O-ring Centerseal; Two o-rings for positive sealing and plastic bearings for long life· World Class Diaphragm; High quality rubber compound, resistant to heat and cold; Superior flexibility even at -40°F· Rugged Service Housing; 9 gauge steel powder coated· Orange Alert® Stroke Indicator· Self-piloting Dust Shield· Sizes to fit all drum brake applications

Long Stroke Gold Seal®

Square ports; embossed or “cast-in” service instructions.

Standard Stroke Gold Seal®

Round ports (shown here); nospecial tags or embossed serviceinstructions.


Haldex Life Seal® Actuators

Page 19

Haldex Maxibrake® Spring Brakes

PART #1493030185Combination - Size 303013.4” PRL; 3/4” Pushrod

PART #1493030186Combination - Size 303013.4” PRL; 3/4” Pushrod

PART #LC3030Combination - Size 3030

· Special Heat Treated Power Spring results in unsurpassed force output consistency and superior fatigue life· Patented Internal Check Valve relieves any pressure build-up in the sealed spring chamber and prevents outside air and contaminants from entering the chamber· Adapter Seal and Bearing. Custom design EGP guide bearing and o-ring provide a long lasting and air-tight seal· World Class Diaphragm. High quality rubber compound, resistant to heat and cold. Superior flexibility even at -40°F· Orange Alert® Stroke Indicator· Self-piloting Dust Shield

· All steel housing provides strength, durability and extra corrosion resistance· Aluminum piston and nylon bearing provide maximum guidance stability that diffuses lateral and twisting motion· Steel alloy springs are epoxy coated to protect against rust and corrosion· Deeper spring cavities and optional spring force outputs offer uniform output and longer service life· Unit cannot be released manually, making it inoperative; this ensures the vehicle cannot be moved until the air supply is at a safe level

Standard Stroke Life Seal®

Round ports; no special tags orembossed service instructions.

PART #KSM3060GCS46175(147303175)

PART #KSM3060GCS46176(1473030176)

PART #KSM3060GCS46177(1473030177)

PART #KSM3060GCS46178(147303178)

Contact the Haldex Technical Services Department for specific details. 800-643-2374


Haldex Actuator/Spring Brake Replacement Parts

Page 20

Boot Assembly for 5/8” Pushrod

T-30 Clampband Kit

Clevis FD - 1/2” Pin

Clevis FD - 5/8” Pin

Yoke Assembly 5/8” Rod - 18 Thread - 14mm

Clevis Pin - 1/2”

T-20 Diaphragm

T-24 and T-24 LS Diaphragm

T-30 Diaphragm

T-36 Diaphragm

Plug Cylinder Maxibrake® “I” and “R” Series

Felt Wiper Ring (Air Units Only) Maxibrake® “I” and “R” Series

Dust Boot Kit Maxibrake® “I” and “R” Series

Release Tool - 3036 & 3636

BA1

CB30S1

CF2

CF3

CF12

CP1

DP20

DP24L

DP30

DP36

M4031076

M4031173

M4031334

RT2

Haldex Automatic Brake Adjusters

PART # Description

· Haldex automatic brake adjusters cover more applications than any other brand· Backed by the industry’s longest warranty· Compatible with all major brand clevises· O-ring Sealed Unit· Unique Control Arm Design with Installation Indicator

· Solutions For All Applications· Over 35 Castings in US and Over 225 Castings Worldwide· Heavy Duty, Severe Service Transit Adjusters with High Offsets Available

Easily accessible hex nut simplifies adjustment

Built-in installation indicatoreliminates templates, assuresproper installation

Control arm eliminates linkage concerns and provides greater application flexibility

Reliable O-rings and gasketsseal out moisture and contaminates


Suspension Products

Page 21

PART # 48100225 Adjustable Linkage

· Model SRK 168· Maximum Length 19 5/8”· A common trailer suspension linkage used by several OE manufacturers· Linkage can be cut to obtain desired linkage length· Simple to assemble and install

PART # 90054007 Controlled Response HeightControl Valve

· Original equipment on many trucks and trailers· Automatically adds air to, or exhausts air from air suspension to maintain constant static design height· Does not respond to short duration dynamic changes in axle position, thus reducing air consumption which extends compressor life and saves fuel· 1/4” Fittings Provided; Dump Valve Not Included· Replaces KN90054007

HALD

EX L

inka

ge

HALD

EX C

ontr

olle

d Re

spon

se H

CV

HALD

EX L

ink

Com

pani

on

HALD

EX L

ink

Com

pani

on

PART # 90054516

Linked End

HALD

EX L

ink

Com

pani

on

HALD

EX P

ress

ure

Prot

ectio

n Va

lve

PART # 90054670

Linked End

PART # 90554107 Pressure Protection Valve Premium

· Protects the air brake system in the event of a leak or failure within the air suspension system· A serviceable replacement filter minimizes contaminates and other debris from entering other air system accessories

PART # 90054630

Universal Connector

All Ports: 1/8” NPT

All Ports: 1/4” NPT Closing Pressure: 70 PSIGOpening Pressure: 75 PSIG

minimum


Suspension Products (cont’d)

Page 22

HALD

EX C

ontr

olle

d Re

spon

se H

CV

HALD

EX D

ump

Valv

e

HALD

EX C

R HC

V

HALD

EX Im

med

iate

Res

pons

e HC

V

PART # 90554335 Height ControlDump Valve

· Original equipment on many trucks and trailers· Automatically adds air to, or exhausts air from air suspension to maintain constant static design height· Does not respond to short duration dynamic changes in axle position, thus reducing air consumption which extends compressor life and saves fuel· 1/4” Fittings Provided; Dump Valve Not Included· Replaces KN90054007

HALD

EX P

R Pl

us V

alve

HALD

EX P

ress

ure

Prot

ectio

n Va

lve

PART # 90555110PR Plus Valve With Reduced Flow Dump

PART # 90555396 Pressure Protection Valve

· All Ports 1/4” NPT · Closing Pressure: 65 PSI· Opening Pressure: 70 PSI

PART # 90554623Controlled Response Height Control Valvewith Dump and Exhaust Tube

PART # 90555105 EGP Immediate ResponseHeight Control Valve

· Inflates or exhausts air springs to maintain suspension ride height· Made of durable Engineering Grade Plastic (EGP)· Non-time delay valve· Direct replacement for 90554241


PART # 90554111 Controlled Response HeightControl Valve With Fitting Filter



Suspension Products (cont’d)

Like-Nu® Remanufactured Hydraulic Brake Calipers

Page 23

PART # 93900224Shoulder Bolt for Linkage

PART # KN27000 EGP Low Flow Leveling Valve Kit

· Used to maintain vehicle height on an air suspended chassis· Made of durable Engineering Grade Plastic (EGP)· Linkage included in specified lengths· One valve can be used for left and right installations· One valve can control two suspension bellows· Standard flow valve for truck, bus, trailer applications

HALD

EX S

houl

der B

olt

HALD

EX E

GP

Low

Flo

w L

evel

ing

HALD

EX E

GP

High

Flo

w L

evel

ing

BEN

DIX®

2.6

0” Tw

in P

isto

n

BEN

DIX®

2.8

8” Tw

in P

isto

n

DAYT

ON

2.5

0” Tw

in P

isto

n

HALD

EX L

inka

ge R

epai

r Kit

PART # RN10JC Linkage Repair Kit


PART # KN27013 EGP High Flow Leveling Valve Kit

· Used to maintain vehicle height on an air suspended chassis· Made of durable Engineering Grade Plastic (EGP)· Linkage included in specified lengths· One valve can be used for left and right installations· One valve can control two suspension bellows· Adjust and cut arms to desired length for application· High flow valve for tractor applications


BENDIX® 2.88” Twin Piston Chev/GMC/Navistar (Casting #4150844)RH55250X Caliper OnlyRH55250LLX Loaded Kit (Left)RH55250RLX Loaded Kit (Right)RH55250SX Semi-LoadedSK225K Shim KitRH5635K Hardware Kit

BENDIX® 2.60” Twin Piston Navistar (Casting #4151733)RH55314X Caliper OnlyRH55314LX Loaded KitRH55314SX Semi-Loaded KitSK225K Shim KitRH5634K Hardware Kit

DAYTON 2.50” Twin Piston Chev/GMC/Ford (Casting #472)RH55251X Caliper OnlyRH55251LX Loaded KitRH55251SX Semi-Loaded KitSK224K Shim KitRH5636K Hardware Kit


Grey-RockTM RSD Compliant Friction Material

Page 24


Grey-RockTM RSD Compliant Friction Material (cont’d)

Page 25


Grey-RockTM Friction Products

Page 26

Consult the Haldex Master Catalog (www.haldex.com) for a complete listing of Friction Products Offered.

GZ BRAKE BLOCK

Friction Code . . . . . . . . . . . . . . . . . . . . . . . . .FF Material Type . . . . . . . . . . .2035 Semi-Metallic Brake Type . . . . . . . . . . . . . . . . . . . . .“S” Cam GAWR . . . . . . . . . . . . . . . . . . . . . . .23,000 lbs.

GC BRAKE BLOCK

Friction Code . . . . . . . . . . . . . . . . . . . . . . .FF/FF Material Type . . .GG/GZ Semi-Metallic/Organic Combo Brake Type . . . . . . . . . . . . . . . . . . . . .“S” Cam GAWR . . . . . . . . . . . . . . . . . . . . . . .23,000 lbs.

GP BRAKE BLOCK

Friction Code . . . . . . . . . . . . . . . . . . . . . . . .GG Material Type . . . . . . . . . . . . . . . .2030 Organic Brake Type . . . . . . . . . . . . . . . . . . . . .“S” Cam GAWR . . . . . . . . . . . . . . . . . . . . . . .26,000 lbs.

GM BRAKE BLOCK

Friction Code FF Material Type 2040 Semi-Metallic Brake Type “S” Cam GAWR 25,000 lbs.

GR BRAKE BLOCKRSD SYSTEMS COMPLIANT

Friction Code . . . . . . . . . . . . . . . . . . . . . . . . .FF Material Type . . . . . . . . . . . . . . . .2015 Organic Brake Type . . . . . . . . . . . . . . . . . . . . .“S” Cam GAWR . . . . . . . . . . . . . . . . . . . . . . .20,000 lbs.

GG BRAKE BLOCKRSD SYSTEMS COMPLIANT


GD BRAKE BLOCK


GF BRAKE BLOCK


HV77 BRAKE BLOCK

Friction Code . . . . . . . . .FF Material Type . .HV77 Organic Brake Type . . . . . .“S” Cam GAWR . . . . . . .20,000 lbs.

HV88 BRAKE BLOCK

Friction Code . . . . . . . . .FF Material Type . .HV88 Organic Brake Type . . . . . .“S” Cam GAWR . . . . . . .23,000 lbs.

HV76 BRAKE BLOCK

Friction Code . . . . . . . . . . . . .FF Material Type . . . . .HV76 Organic Brake Type . .“S” Cam Front Brake GAWR . . . . . . . . . . .20,000 lbs.

GN BRAKE BLOCK


Gre

y-R

ock

TM

Eco

nom

y G

rade

Fri

ctio

n


Grey-RockTM Friction Products (cont’d)

Page 27

PART NUMBER FORMAT - Medium & Heavy Duty

GG 4515 Q R R = Reman Shoe G = Reman Gripper Kit - Boxed (2 Shoes and Hardware Kit) N = New Lined Shoe J = New Gripper Kit - Boxed (2 Shoes and Hardware Kit)

Shoe Core Identifier

FMSI NUMBER (Friction Materials Standard Institute, Inc.)

Product Mix Designate (Brake Block Description)

Brake Lining Descriptions

AD, BD, CD, D, ED, Etc. . . . . . . . . . = Lining Drill Pattern (Varies With F.M.S.I. #)

Bs . . . . . . . . . . . . . . . . . . . . . . . . . . = Lining In Bulk (Follows Drill Pattern)

Xs . . . . . . . . . . . . . . . . . . . . . . . . . . = Single Oversized Lining (Follows Drill Pattern)

XXs . . . . . . . . . . . . . . . . . . . . . . . . . = Double Oversized Lining (Follows Drill Pattern)

XXXs . . . . . . . . . . . . . . . . . . . . . . . = Triple Oversized Lining (Follows Drill Pattern)

sLimited Availability

Common Friction Words

Anchor . . . . . . . . . . . . . . . . . .Refers to the anchor end of a piece of friction material.

Cam . . . . . . . . . . . . . . . . . . . .Refers to the cam end of a piece of friction materials.

Drill Pattern . . . . . . . . . . . . . .Dimensional data referring to holes in specific piece of friction material. The data will include the size, number and location of the holes for each FMSI #.

FMSI . . . . . . . . . . . . . . . . . . . .Stands for “Friction Material Standard Institute”.

FMSI # . . . . . . . . . . . . . . . . . .Number assigned to a specific dimension of block that may include the radius, thickness, width, length and drill hole specifications.


Meritor - Air/Double Web and Cast Brakes

Width FMSI # Shoe I.D. Core Group 5” 4703 Q 4703

15” x 5” Meritor “Q” Plus

· Hardware Kit Part # CQ65642

Relined Relined-Gripper Kit New New-Gripper Kit Shoe With CQ65642 Lined Shoe With CQ65642 GG4703QR GG4703QG GG4703QN GG4703QJ

GR4703QR GR4703QG GR4703QN GR4703QJ





16 1/2” x 7” Meritor “Q” Plus

· Hardware Kit Part # CQ66867


Width FMSI # Shoe I.D. Core Group 8 5/8” 4711 Q 4711

16 1/2” x 8 5/8” Meritor “Q” Plus

· Uses extended wear lining, standard cam and hardware· Hardware Kit Part # CQ66867




Page 29


16 1/2” x 6” Meritor “Q” Plus· Hardware Kit Part # CQ66887



Eaton - Air/Double Web and Cast Brakes

Eaton - Air/Double Web and Cast Brakes

Width FMSI # Shoe I.D. Core Group 6” 4317 EB 4317

16 1/2” x 6” Relined Shoe for Eaton (EB) High Mount · Hardware Kit Part # CQ69004

Relined Relined-Gripper Kit New New-Gripper Kit Shoe With CQ66887 Lined Shoe With CQ66887 GG4317EHMR GG4317EHMG GG4317EHMN GG4317EHMJ

Width FMSI # Shoe I.D. Core Group 8 5/8” 4674 EB 4674

16 1/2” x 8 5/8” Relined Shoe for Eaton (EB) · Hardware Kit Part # CQ67319

Relined Relined-Gripper Kit New New-Gripper Kit Shoe With CQ66887 Lined Shoe With CQ66887 GG4674R GG4674EG GG4674EN GG4674EJ

3 1/2”

1 1/4”

4”

1 1/4”


TransitmaX® Friction Product Offering

Performance Profile

• Developed for excellent braking performance and extended service life in all transit and coach applications

• Organic fiber based formulation provides outstanding thermal stability and enhanced drum life

• Quiet operation ensures passengersof a safe trouble-free ride

• Minimal growth and swell makes TransitmaX™ an excellent choice to be combined with automatic brake adjusters and ABS systems

• Standard and Oversize Liningsavailable

Quality & Certifications

• FMVSS-121 certified at 26K axle rating

• APTA / AMECA certified

• Manufactured in ISO/TS16949 certified facilities

• Decades of experience supplying friction for heavy and severe duty vehicles

Brake: 16 1/2 x 8 5/8Axle Load: 26,000 lbs.Rolling Radius: 18.3AL Factor: 195

Brake: 14 1/2 x 10Axle Load: 26,000 lbs.Rolling Radius: 20.3AL Factor: 210

Friction Average: Normal 0.43Hot 0.41Coefficient - FF

High PerformanceAPTA Certified

26,000 lb. Brake LiningFor Transit and

Coach ApplicationsAvailable in both New and

Remanufactured Shoes


TransitmaX® Friction Product Offering (cont’d)

Page 31

- Little Rock, AR- Grand Rapids, MI- Columbia, SC- Houston, TX- Harrisburg, PA- Ontario, CA- Vancouver, WA

- Cambridge, ON CANADA


TransitmaX® Friction Product Offering (cont’d)

TRANSIT BLOCKTM

Friction Code . . . . . . . . . . . . . . . . . . . . . . . . .FF Material Type . . . . . . . . . . . . . . . . . . . .Organic Brake Type . . . . . . . . . . . . . . . . . . . . .“S” Cam GAWR . . . . . . . . . . . . . . . . . . . . . . .26,000 lbs. Certification . . . . . . .APTA / AMECA Approved

PART NUMBER FORMAT - Transit

TM 4592 686 L B G XX Standard Thickness X = 1st Oversize XX = 2nd Oversize XXX = 3rd Oversize

G = Reman Gripper Kit - Boxed (2 Shoes and Hardware Kit) J = New Gripper Kit - Boxed (2 Shoes and Hardware Kit) K = Reman Shoes - Boxed (2 Per) P = New Lined Shoes - Boxed (2 Per) R = Reman Shoe N = New Lined Shoe

Bolt Information B = Brass Bolts

Bushing Information L = New Bushings

Bushing Type 686 = OE Reference

FMSI NUMBER (Friction Materials Standard Institute, Inc.)

TM = TransitmaX®

Fasteners

Part No. DescriptionBA3816100B 3/8” x 1” Brass Bolt AssemblyBA3816125B 3/8” x 1 1/4” Brass Bolt Assembly


MERITOR “W” Series Cam Brake

Page 33

MERITOR “W” SERIES CAM BRAKE4228-1157Front Axle Brake

OE Number A4-32222-M-1157Core Group 4228 1 Pc Bushing

Lining Part No. DescriptionTM4228FD Standard ThicknessTM4228FDX First OversizeTM4228FDXX Double OversizeTM4228FDXXX Triple Oversize

BRAKE HARDWARE KITPart No. CQ69011

TM42281157BJ YES BRASS BOLT NEW BOXED (2 PER) YES STANDARDTM42281157BP YES BRASS BOLT NEW BOXED (2 PER) NO STANDARDTM42281157LBG YES BRASS BOLT REMAN BOXED (2 PER) YES STANDARDTM42281157LBK YES BRASS BOLT REMAN BOXED (2 PER) NO STANDARDTM42281157BN YES BRASS BOLT NEW SINGLE SHOE NO STANDARDTM42281157LBR YES BRASS BOLT REMAN SINGLE SHOE NO STANDARD

HaldexPart No.

NewBushing

FastenerType

ShoeType Configuration

HardwareIncluded

LiningThickness

Popular Lined Shoe Numbers

14 1/2” x 6”


MERITOR “W” SERIES CAM BRAKE4592-686Rear Axle Brake

OE Number A1-3722-J-686Core Group 4592SB 2 Pc Bushing


Lining Part No. DescriptionTM4592AD Standard ThicknessTM4592ADX First OversizeTM4592ADXX Double OversizeTM4592ADXXX Triple Oversize


HaldexPart No.

NewBushing

FastenerType


HardwareIncluded

LiningThickness


14 1/2” x 10”

Page 34



MERITOR “W” SERIES CAM BRAKE4592-824Rear Axle Brake

OE Number A1-3722-R-824Core Group 4592BB 1 Pc Bushing




HaldexPart No.

NewBushing

FastenerType


HardwareIncluded


14 1/2” x 10”


Page 35


MANCAST BRAKE4656 CastFront Axle Brake

OE Number 81502016187Core Group 4656 1 Pc Bushing


Lining Part No. DescriptionTM4656D Standard ThicknessTM4656DX First OversizeTM4656DXX Double OversizeTM4656DXXX Triple Oversize

TM4656TCJ YES RIVET NEW BOXED (2 PER) YES STANDARDTM4656TCLG YES RIVET REMAN BOXED (2 PER) YES STANDARDTM4656TCLK YES RIVET REMAN BOXED (2 PER) NO STANDARDTM4656TCP YES RIVET NEW BOXED (2 PER) NO STANDARDTM4656TCN YES RIVET NEW SINGLE SHOE NO STANDARDTM4656TCLR YES RIVET REMAN SINGLE SHOE NO STANDARD

HaldexPart No.

NewBushing

FastenerType


HardwareIncluded

LiningThickness


16.14” x 6.3”

Page 36

MAN Cast Brake


MANCAST BRAKE4657 CastRear Axle Brake

OE Number 81502016188Core Group 4657 1 Pc Bushing


Lining Part No. DescriptionTM4657D Standard ThicknessTM4657DX First OversizeTM4657DXX Double OversizeTM4657DXXX Triple Oversize


HaldexPart No.

NewBushing

FastenerType



16.14” x 8.66”

MAN Cast Brake

Page 37

HardwareIncluded

LiningThickness


MERITORCAST PLUS BRAKE4715 CastFront Axle Brake

OE Number A-3222-H-2296Core Group 4715CAST 2 Pc Bushing




HaldexPart No.

NewBushing

FastenerType



16 1/2” x 6”

Page 38

MERITOR Cast Plus Brake

HardwareIncluded

LiningThickness


MERITORCAST PLUS BRAKE4728 CastRear Axle Brake

OE Number A-3222-F-2294Core Group 4728CAST 2 Pc Bushing




HaldexPart No.

NewBushing

FastenerType



16 1/2” x 8 5/8”

MERITOR Cast Plus Brake

Page 39

HardwareIncluded

LiningThickness


PROSteelTM PLUS


PROSteelTM PLUS

Page 41


Like-Nu® Remanufactured Carrier A/C Compressors

Unparalleled Product End-Of-Line and Component Testing

› All cylinders are resurfaced using the latest CNC honing equipment with custom fixtures toprevent uneven surfaces within the cylinder walls.

› All compressors assembled using the most accurate, high-end DC Torque control on all critical fasteners.

› All units undergo no-load testing for build-up.

› All units vacuum leak tested with state-of-the-art LeakMaster testing equipment.

› All internal parts inspected and replaced if not within OE tolerances.

› Oil pumps are tested for proper output during operation and replaced if necessary.

› One Year Warranty.

Trai

ler R

eefe

r App

licat

ions

PART #R5G6T41AUXReman Carrier A/C Compressor 05G Ultra

Tran

sit B

us, C

oach

, Bus

App

licat

ions

PART #R5G6T41ABXReman Carrier A/C Compressor 05G


Notes:


This page left blank intentionally.

L20720 Cover 5-16_Layout 1 5/31/2016 11:19 AM Page 3

L207

20 U

S R

ev. 5

/16

50

ALP

Pr

inte

d In

The

USA

Disclaimer: The products described within thisliterature, including without limitation, productfeatures, specifications, designs, availability andpricing are subject to change by Haldex and itssubsidiaries at any time without notice.

This document and other information fromHaldex, its subsidiaries and authorizeddistributors provide product and/or systemoptions for further investigation by users havingtechnical expertise. It is important that youanalyze all aspects of your application and reviewthe information concerning the product orsystem, in the current literature or catalog. Dueto the variety of operating conditions andapplications for these products or systems, theuser, through their own analysis and testing, issolely responsible for making the final selectionof the products and systems and assuring that allperformance, safety and warning requirementsare met.

©2016, Haldex AB - This material may containHaldex trademarks and third party trademarks,trade names, corporate logos, graphics andemblems which are the property of theirrespective companies. The contents of thisdocument may not be copied, distributed,adapted or displayed for commercial purposesor otherwise without prior written consent fromHaldex.

KoreaHaldex Korea Ltd.SeoulTel.: +82 2 2636 7545Fax: +82 2 2636 7548E-Mail: [email protected]

MexicoHaldex de Mexico S.A. De C.V.MonterreyTel.: +52 81 8156 9500Fax: +52 81 8313 7090

PolandHaldex Sp. z.o.o.PraszkaTel.: +48 34 350 11 00Fax: +48 34 350 11 11E-Mail: [email protected]

RussiaOOO “Haldex RUS”MoscowTel.: +7 495 747 59 56Fax: +7 495 786 39 70E-Mail: [email protected]

SpainHaldex España S.A.GranollersTel.: +34 93 84 07 239Fax: +34 93 84 91 218E-Mail: [email protected]

SwedenHaldex Brake Products ABLandskronaTel.: +46 418 47 60 00Fax: +46 418 47 60 01E-Mail: [email protected]

United KingdomHaldex Ltd.Newton AycliffeTel.: +44 1325 310 110Fax: +44 1325 311 834E-Mail: [email protected]

Haldex Brake Products Ltd.MIRA Technology ParkTel.: +44 2476 400 300Fax: +44 2476 400 301E-Mail: [email protected]

USAHaldex Brake Products Corp.Kansas CityTel.: +1 816 891 2470Fax: +1 816 891 9447E-Mail: [email protected]

AustriaHaldex Wien Ges.m.b.H.ViennaTel.: +43 1 8 69 27 97Fax: +43 1 8 69 27 97 27E-Mail: [email protected]

BelgiumHaldex N.V.BalegemTel.: +32 9 363 90 00Fax: +32 9 363 90 09E-Mail: [email protected]

BrazilHaldex do Brasil Ind. E Com. Ltda.São José dos CamposTel.: +55 12 3935 4000Fax: +55 12 3935 4018E-Mail: [email protected]

CanadaHaldex Ltd.Cambridge, OntarioTel.: +1 519 621 6722Fax: +1 519 621 3924E-Mail: [email protected]

ChinaHaldex Vehicle Products Co. Ltd.SuzhouTel.: +86 512 8885 5301Fax: +86 512 8765 6066E-Mail: [email protected]

FranceHaldex Europe SASWeyersheim Tel.: +33 3 88 68 22 00Fax: +33 3 88 68 22 09E-Mail: [email protected]

GermanyHaldex Brake Products GmbHHeidelbergTel.: +49 6 221 7030Fax: +49 6 221 703400E-Mail: [email protected]

HungaryHaldex Hungary Kft.SzentlörinckátaTel.: +36 29 631 400Fax: +36 29 631 401E-Mail: [email protected]

IndiaHaldex India LimitedNasikTel.: +91 253 6699501Fax: +91 253 2380729

ItalyHaldex Italia Srl.Biassono Tel.: +39 039 47 17 02Fax: +39 039 27 54 309E-Mail: [email protected]

www.haldex.com

Haldex develops and provides reliable and innovative solutions with focus on brake and air suspension products to the globalcommercial vehicle industry. Listed on the Stockholm Stock Exchange,Haldex has annual sales of approximately3.9 billion SEK and employs about 2,200people.

L20720 Cover 5-16_Layout 1 5/31/2016 11:19 AM Page 4

transit - haldex · model isc & isl engine description 8.3 liters mfg ... cummins isc & isl...

Documents