training drilling center information...

Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15

+38 (0342) 50-46-91; +38 (0342) 50-07-50 [email protected], www.nung.edu.ua

of 9

TRAINING DRILLING CENTER

INFORMATION NOTICE

In October 2004 Ivano-Frankivsk National Technical University of Oil and Gas

(IFNTUOG) was accredited by International Well Control Forum (IWCF) and got the

ability to certify drilling personnel by Well Control program.

Chief manager of IWCF

Michael Cummins (right on

photo) presented accreditation

certificate to University’s vice-

rector –

Karpash Oleg Mikhailovich

(left on photo)

The necessity of international certification for drilling specialists was

determined by number of accidents. Opening of unknown formations at big depth

increases the risk of loosing hydrostatic control in system “well-formation”, which is

the first reason of kick inflow.

Follow such situation – lack of drilling engineer’s qualification and disability to

take the immediate action in emergency situation can result at open gusher. Thus, it

hearts ecological situation and leaf to financial losses.

The solution of these problems was found at international certification of

drilling companies and personnel in different countries according to well control

course.

Власне, ці обставини і спонукали міжнародні організації за допомогою

сертифікації персоналу бурових компаній вирішувати питання протифонтанної

безпеки під час буріння свердловин у різних країнах світу.

mailto:[email protected]



of 9

To submit these criteria and bring new education services for Ukrainian drilling

personnel it was founded training drilling center in Ivano-Frankivsk National

Technical University of oil and gas.

Training group from public

company “Ukrtransgas”

and “Ukrgasproduction”

are self-studying after

course of lectures in

multimedia room of

training drilling center

At this new University’s department the main position is at full-size training

drilling simulator DRILLSIM 5000, which was created for imitating different

technological operations while well drilling at different conditions and also for drilling

personnel’s knowledge control during gas kick in a well.

Training simulator DRILLSIM 5000 is equipped by all imitating consoles for

creation real drilling rig control room. There are acoustic effects, which are

synchronized with training operations, creates maximum presents of candidate at

drilling rig.

Soft of training simulator gives to the instructor ability to control all actions of

candidates during their practical study and examination. Instructor can change

parameters of practical exercises both at the beginning of training and during the

training. Immediate changes in drilling or well control conditions during well control

operations gives ability to instructor to create stress situation for candidate. It requires

immediate candidate’s reaction of changed situation and gives them opportunity to

evaluate their actions if it was done at real situation.




of 9

Offshore and onshore

training consol for

DRILLSIM 5000

operating

Central operation console

of DRILLSIM 5000

Our training center has 2nd, 3rd and 4th LEVEL of accreditation. Education

process with candidates has provided by three-stage system: theoretical course,

practical course (training simulator) and examination. When a person successfully

passes its exam (more than 70% for each exam) it gives him opportunity to get IWCF

certificate. IWCF certification is required in most drilling companies all over the

world.




of 9

Stuff of training drilling center

Kolisnyk Vasyl Ivanovych –

IWCF assessment center manager,

associate professor, Ph.D.,

tel/fax. 00380 (342) 504691,

E-mail: [email protected]

Oleksjuk Nikolaj Petrovich – senior lector,

IWCF assessor

tel/fax. 00380 (3422) 4-21-53,


Kostryba Ivan Vasylovych –

associate professor, Ph.D.,

IWCF instructor

tel/fax. +380 (3422) 42353,


Kolisnyk Roma Antinivna –

Laboratory chief of training center

tel/fax. +380 (342) 504691,


Hrymaniuk Volodymyr –

IWCF instructor

tel/fax. +380 (342) 504691,










of 9

108

67

50

22

35

9

12

46

30

122

59

Results of Ukraininan drilling engineers certification according to

international standarts for the period from 2005 till 2014

Candidates from other countries

Other Ukrainian companies and private persons

Daughter joint-stock company 'Prime Drill'

Equity joint venture «Poltava Petroleumcompany»Departments of «Ukrgasproduction» company

Daughter joint-stock company «Ukrtransgas»

Daughter joint-stock company «Smit Ukraine»and «NewTech Ukraine»»Daughter joint-stock company "Likvo"

Public company «Chornomorneftegas»

Public company «Ukroil»

Daughter joint-stock company «Ukrgasproduction»




of 9




of 9

Approximate time-table of IWCF courses

in 2015

Level of

certification Start date Examination date

3 – 4 16.02.2015 27.02.2015

2 02.03.2015 06.03.2015

3 – 4 16.03.2015 27.03.2015

2 06..04.2015 10.04.2015

3 – 4 13.04.2015 24.04.2015

2 04.05.2015 08.05.2015

3 – 4 18.05.2015 29.05.2015

2 08.06.2015 12.06.2015

3 – 4 15.06.2015 26.06.2015

2 06.07.2015 10.07.2015

3 – 4 20.07.2014 31.07.2015

2 31.08.2015 04.09.2015

3 – 4 14.09.2015 25.09.2015

2 05.10.2015 0910.2015

3 – 4 12.10.201 23.10.2015

2 02.11.2015 06.11.2015

3 – 4 09.11.2015 20.11.2015

2 30.11.2015 04.12.2015

3 – 4 07.12.2015 18.12.2015


training drilling center information...

Documents