www.durr.com www.durr.com

TRAINING CENTER & COURSES

APPLICATION TECHNOLOGY

January 2015

WELCOME

Rick Sears, Training & Documentation

TRAINING CENTER

© Dürr Systems, Inc., Application Technology, Training Center & Courses, January 2015 2

A time-proven solution for maximizing up-time is having well trained personnel.

Dürr’s corporate trainers can guide you through best practices on a variety of subjects—from robot path programming to mechanical maintenance to operator training and more.

Quality Hands-on Training

Many customers find it convenient and simple to send students to our newly renovated training facility—which opened in 2014. Here, students can get distraction-free, individualized attention and hands-on experience in an environment specifically designed to facilitate learning.

TRAINING CENTER

© Dürr Systems, Inc., Application Technology, Training Center & Courses, January 2015 3

Meet the Roadshow Robot

This RPL robot is affectionately called “Roadshow Robot.”

It is ready to go on the road to your facility for hands-on training.

Use with fascia, shroud, or screen

TRAINING CENTER

© Dürr Systems, Inc., Application Technology, Training Center & Courses, January 2015 4

Travel to THE WALL for RP7, RP6 & RPE133 Robots

AVAILABLE COURSES

© Dürr Systems, Inc., Application Technology, Training Center & Courses, January 2015 5

General Paint and Sealer

Introduction to Painting 1 day IP-1 Get introduced to automotive painting technology, coatings, and processes.

Introduction to Sealing 1 day IS-1 Get introduced to sealer technology, media, and processes.

EcoPad 1/2 day EP-TB50 Learn how to use the EcoPad to make everyday tasks simpler.

Automotive Paint Application Parameters Optimization 5 days APPO-5 The quality of the paint finish and application efficiency are the most significant, everyday challenges for automotive painting. The process of optimizing paint application involves a close look at the cause-and-effect relationship between operating parameters and application equipment. The scope of this course includes an in-depth study of this relationship and the range of variables that determine the behavior of paint application.

AVAILABLE COURSES

© Dürr Systems, Inc., Application Technology, Training Center & Courses, January 2015 6

EcoScreen 3DOnSite is Dürr’s proprietary software for visualization and virtual path programming.

Get real world experience in a virtual world before moving the robot. We also offer real-world style training using teach pendants and robots.

3D-Onsite, Basic 2 days 3DOB-2 Introduces students to basic CAD robot path programming and coordinate systems and the use of EcoScreen 3DOnSite.

3D-Onsite, Advanced 3 days 3DOA-3 Students will generate and edit robot programs in 3D graphics and work with process data parameters using EcoScreen 3DOnSite.

Robot Path Programming, Basic 3 Days RPP-3 Introduces students to robot components, teach pendant operation, safety precautions, jogging, mastering, and program entry.

Robot Path Programming, Advanced 5 days RPP-5 Students will explore theory, concepts, and practical applications associated with the motion controller and associated servo functionality.

Robot Programming

AVAILABLE COURSES

© Dürr Systems, Inc., Application Technology, Training Center & Courses, January 2015 7

Fluid Maintenance (Paint)

A beautiful finish is a combination of the paint and how it is applied. Learn the tips, tricks & techniques to maintaining the paint application and color changing components.

A t o m i z e r C l a s s e s Students learn how to disassemble, rebuild, and troubleshoot the various Dürr atomizers.

* These classes are also available in a concentrated half-day version, called a Tool Box course (e.g., EB1W-TB50). W = Waterborne & S = Solvent Based

EcoBell (W) 1 day EB1W-1*

EcoBell (S) 1 day EB1S-1*

EcoBell2 (W) 1 day EB2W-1*

EcoBell2 (S) 1 day EB2S-1*

EcoBell2 SL (W) 1 day EB2SLW-1*

EcoBell2 SL (S) 1 day EB2SLS-1*

EcoBell2 HX 1 day EB2HX-1*

EcoBell3 (W) 1 day EB3W-1*

EcoBell3 (S) 1 day EB3S-1

EcoBell 2K 1 day EB2K-1*

EcoGun2 1 day EG2-1*

R e l a t e d C l a s s e s EcoBell3 Test Stand 1/2 day EB3TS-TB50 Teaches the student the use and benefits of the EcoBell Test Stand in conjunction with EcoBell3 Training.

Linear Color Changer 3 days LCC-3 Learn how to disassemble, rebuild, and troubleshoot all the components of the linear color changer.

Fluid Component Maintenance 3 days RPFC-3 Benefit from 40% classroom discussions and 60% hands-on activities on all the maintenance and rebuild procedures for fluid components in the painting robots.

AVAILABLE COURSES

© Dürr Systems, Inc., Application Technology, Training Center & Courses, January 2015 8

Fluid Maintenance (Sealer)

Learn the tips & tricks to sealer equipment maintenance with hands-on training. Students learn how to disassemble, rebuild, and troubleshoot the various sealer application components.

EcoGun Sealer 1 day EGS-1 Students will learn about sealer gun maintenance, the mastic regulator, the proportional valve, and the masking device.

EcoGun Sealer Tool Box 1/2 day EGS-TB50 This is a concentrated, half-day version of the full day class.

RS Fluid Component Maintenance 2 days RSFC-2 Benefit from 40% classroom discussions and 60% hands-on activities on all the maintenance and rebuild procedures for fluid components in the sealer robots

AVAILABLE COURSES

© Dürr Systems, Inc., Application Technology, Training Center & Courses, January 2015 9

Mechanical Maintenance for Both Paint and Sealer Robots

Get theory in the basic classes or hands-on experience in the advanced classes for the various maintenance procedures of the Dürr paint and sealer robots.

P a i n t

Robot (Paint) Mech. Maintenance, Basic 2 days RPMMB-2 Introduces the theory of basic paint robot operation, safety precautions, and use of the hand-held teach pendant.

6-Axis Robot (Paint) Mech. Maintenance, Advanced 3 days RPMMA-3 With lots of hands-on action, participants will dismantle the 6-Axis paint robot, reassemble it, and master the robot axes.

7-Axis Robot (Paint) Mech. Maintenance, Advanced 4 days RPMMA-4 Dismantle the 7-Axis paint robot, reassemble it, and master the robot axes—hands-on.

S e a l e r

Robot (Sealer) Mech. Maintenance, Basic 2 days RSMMB-2 Introduces the theory of basic sealer robot operation, safety precautions, and use of the hand-held teach pendant.

6-Axis Robot (Sealer) Mech. Maintenance, Advanced 3 days RSMMA-3 With lots of hands-on action, participants will dismantle the 6-Axis paint robot, reassemble it, and master the robot axes.

7-Axis Robot (Sealer) Mech. Maintenance, Advanced 4 days RSMMA-4 Dismantle the 7-Axis paint robot, reassemble it, and master the robot axes—hands-on.

AVAILABLE COURSES

© Dürr Systems, Inc., Application Technology, Training Center & Courses, January 2015 10

Electrical Maintenance Gain a deeper understanding of effects of high voltage on paint applications.

High Voltage 1 day HV-1 Concentrates on the different high voltage systems and safety related issues. Examine the effects of high voltage on paint applications with lab experimentation using actual high voltage units.

High Voltage 1/2 day HV-TB50 Get an overview in the Tool Box version of the full day class. This class focuses on theory.

Robot Electrical Maintenance, Basic 3 days REMB-3 Introduces the robot and robot controller’s electrical components with discussions about configuration and diagnostic procedures.

Robot Electrical Maintenance, Advanced 4 days REMA-4 Covers controller software maintenance, teach pendant operation, interpretation of error codes, and robot mastering.

AVAILABLE COURSES

© Dürr Systems, Inc., Application Technology, Training Center & Courses, January 2015 11

Emu Systems (EcoClean)

A truly terrific finish starts with a clean surface.

Emu Operator/ Programming 2 days EOP-2 Focuses on the interface of the operator controls to the motion controls of the “Emu” machines. Students will modify, create, and maintain Dürr’s Emu path programs. The class will also cover the principles of the Dürr EcoScreen. Additional topics such as Emu theory, preventive maintenance, and common application problems will be addressed.

Emu is “emu” in English, German, French, Hungarian, Indonesian, Italian, Polish, Portuguese, and Spanish.

But automotive feather duster machines actually use ostrich feathers—not feathers from emus. Maybe the name emu stuck because it translates so easily?

AVAILABLE COURSES

© Dürr Systems, Inc., Application Technology, Training Center & Courses, January 2015 12

Operator Training: Refresh Operator Knowledge or Train New Operators

Robot Operator, Basic 1 day ROB-1 Introduces students to EcoScreen and the start-up, shutdown, and fault recovery procedures.

Robot Operator, Advanced 2 day ROA-2 Features a detailed combination of classroom discussions and hands-on activities. Work in depth with the EcoScreen interface. Learn about atomization and electrostatic paint application. Start-up, shutdown, and fault recovery procedures are also emphasized.

AVAILABLE COURSES

© Dürr Systems, Inc., Application Technology, Training Center & Courses, January 2015 13

Specialized & Vision Training

S p e c i a l i z e d Tr a i n i n g Train the Trainer x day(s) Because needs vary for train the trainer type classes, this class is developed with close cooperation with the customer.

Training Robot x day(s)

RPC Survival 1 day

Maximo 1/2 day

V i s i o n Tr a i n i n g Isra Vision Systems 3 days VTI-3

Liberty Reach Vision Systems 3 days VTL-3

VMT Vision Systems 3 days VTV-3

AVAILABLE COURSES

© Dürr Systems, Inc., Application Technology, Training Center & Courses, January 2015 14

As part of Dürr’s commitment to providing you with services and solutions that best suit your needs, training can be performed at either our newly renovated training facility in Auburn Hills or at your location.

Specialized Training

TRAINING CENTER & COURSES

January 2014

www.durr-application-technology.com

APPLICATION TECHNOLOGY

Rick Sears, Training & Documentation