Trailer TelemaTicsBY KÄSSBOHRER

Enginuity, since 1893

Trailer TelemaTicsVALUE-ADDED SUPPLY-CHAIN MANAGEMENTTrailer Telematics is widely used in temperature-controlled transport,dangerous goods transport, intermodal transport, rental business andhigh value goods transport.

The information regarding the location of trailer via GPs is the basicfeature of any trailer telematics system.

The telematics systems can be configured and installed according toyour company needs.

relevant data for the fleet management will be transmitted in real time tothe data servers where the data will be stored and archived for future uses.

The most prefered features in a telematics system are:

- Data from eBs system like overload, axle load, speed, total mileage, next service, eBs status, roll stability support etc.

- Door status: door open/ close activity to control and secure the cargo during the transport

- Truck iD Data for the information on truck-trailer combinations - Temperature monitoring Data to monitor the temperature deviations,

operating mode of the cooler unit, status of the cooler unit etc. - Temperature data will be stored for 18 months

Enginuity, since 1893

cOmPONeNTs

1- Telematics Control UnitMain boardThe control unit with integrated motion sensor embodies the necessary hard and software to transmit the information to the data servers.

2- CAN CableControl area network The control area network line transmits the data generated in the eBs module into the telematics control units to be transmitted to the server.

3- Sensor CableInterconnetion cablesensor cable gathers the data generated from different sensors like door sensor, temperature sensor, couple sensor etc.

4- Cooler Unit Connection Cable Temperature-controlled transportThe cooler unit connection cable transmits the data from the cooler’s unitdata logger to telematics control unit .

4

3

1

2

rePOrTiNG iNFrasTrUcTUrePORTAL & WEB SERVICES

TELEMATICS SERVICEPORTAL

DATA PORTAL

ERPSYSTEM

REPORTING TOOL

CU

STOM

ER

Enginuity, since 1893

sOlUTiON ParTNer idem GmbH idem transport solutions was founded in 2004, as part of idem GmbH,to provide transport operators with clear guidance in the areas ofrefrigeration, temperature recording, loading and telematics.With more than 10 years experience in these specific areas of the world of transport, idem offers comprehensive trailer telematics solution to the industry.

İdem’s business solutions may be utilised for all vehicle types such astrucks, trailers, swap bodies etc. and in a wide range of applications e.g.temperature control, positioning, historical driven routes, documentation of all door activities with alarm messages (sms, email), collection of technical data from eBs systems. Whether as a stand-alone product for the trailer or as "total telematics" system by coupling with a tractor system (navigation, integration of job or driver communication) - idem makes available the necessary components to identify customer specific requirements and provide innovative solutions. Packages configurated based on the most demanded features in trailer telematics.

idem’s telematics system hardware is named as Tcontrol.

Tcontrol unit size and features may change based on your identifiedpackage preference.

The available two telematics hardware solutions are respectively, Tcontrol Pos and Tcontrol cool.

Basic package provides the essential information regarding the vehicle positioning.

it enables you to control the location of your trailers in a,user-friendly web-based application that includes a user-friendly map.after a movement an update will be sent automatically, where the nextupdate will follow 4 hours later. if the trailer does not move an update willbe sent every 24 hour.

idem GmbH is a member of BPW Group.

THe PacKaGesDEMANDED FEATURES IN TRAILER TELEMATICS

Basic PacKaGeTO LOCATE THE TRAILER

Basic package provides the essential information regarding the vehicle positioning.

it enables you to control the location of your trailers in a,user-friendly web-based application that includes a user-friendly map.

after a movement an update will be sent automatically, where the nextupdate will follow 4 hours later. if the trailer does not move an update willbe sent every 24 hour.

TELEMATICS PACKAGESCOMPONENTS1-Tcontrol POs inclusive battery pack for ca. 4 years. 2-GPs (predelivered sim)

aDVaNceD PacKaGeTO SECURE THE GOODS

in addition to intermediate package service offering, the advancedpackage offers the door sensor to control door activities and cargo integrity.

Door sensors also enable the fleet manager to control time, place and duration of the loading and unloading activities.

advanced package enables the system to send alarm as well ifunscheduled / unexpected door activity takes place.

advanced package offers coupling status, tire pressure condition andTruck iD as an option.

ADVANCED PACKAGECOMPONENTS1- Tcontrol POs2- GPs (predelivered sim)3- caN caBle4- seNsOr caBle

iNTermeDiaTe PacKaGeTO MANAGE OPERATION COST

intermediate package enables you to track your trailers in real time,in a user-friendly web-based application that includes a user-friendly map. This package also enables you to monitor the eBs data and the driven routes with clear fleet overviews and reporting. The data will be stored for 6 months. The stored data will enable you to conduct route optimization and vehicle utilization analyses.

Furthermore, different “geofencing” options will enable you to control driven routes and to track route deviations on time, which will help you to optimize your operating costs.

information like: total mileage, driven km’s per trip, next service needed, current speed, eBs-overload, ignition status, eBs status etc. is always available in real time for the fleet manager.

integrated motion sensor assures optimal internal battery usage and alarms you in case of unauthorised trailer movement or incorrect usage of eBs like, driving without isO/eBs cable.

intermediate package offers door sensors, tire pressure condition,coupling status, and truck recognition as an option.

INTERMEDIATE PACKAGECOMPONENTS1- Tcontrol POs2- GPs (predelivered sim)3- caN caBle FOr eBs sYsTem

cOOl PacKaGeEXCELL IN PERISHABLE GOOD TRANSPORT

cool package provides 100% reliable data during temperature-controlled transport while providing one solution for all cooler models.

Temperature data is recorded and archived for 18 months which isavailable in a user-friendly web-based application at any time.

The system monitors temperature deviations and notifies the qualitymanager immediately if necessary.

reefer alarms and fuel tank sensor data are part of the package.

cool package offers coupling status, tire pressure condition, Truck iDand fuel tank display as an option.

COOL PACKAGECOMPONENTS1- Tcontrol cool2- GPs (predelivered sim)3- caN caBle4- seNsOr caBle5- cOOler cONNecTiON caBle

The packages configurated based on the mostly demanded features in trailer telematics.

idem’s telematics system hardware is named as Tcontrol.

Tcontrol unit size and features may change based on your identified package preference.

The available two telematics hardware units are respectively, Tcontrol Pos and Tcontrol cool.

Enginuity, since 1893

PrOViDiNG cOmPreHeNsiVecUsTOmer sUPPOrT

Kässbohrer Telematics systems offer both hardware and software services. Preconfigured hardware will be installed by Kässbohrer duringproduction. Based on your own iT infrastrucuture and possibilities, Kässbohrer will provide you together with partner idem needed support regarding needed data integrations.

Kässbohrer telematics is designed to enable data export to externalsystems. Kässbohrer portal is a web-based application and there is no additional software needed.

The warranty period is 2 years after delivery of your semitrailer.

more than 200 service points in europe are trained and able to service Kässbohrer Telematics systems.

Kässbohrer Fahrzeugwerke GmbH siemensstraße 74, 47574, Goch Deutschland | T 0049 2823 9721-0 | F 0049 2823 9721-21 | info@kaessbohrer.com | www.kaessbohrer.com