traditions sheffield g c shutters€¦ · 2" louver +/- 11⁄2"; 41⁄2" louver +/-...
TRANSCRIPT
GTRADITIONS™ SHUTTERSSHEFFIELD COLLECTION
PRICING
Pricing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Graber Wood Story. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Wood Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
General Product Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Shutter Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Shutter Frame and Hardware Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Shutter Program Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Shutter Louvers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Hidden Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Louver Clearance, Size Limitations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Measuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Divider Rail Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Panel Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Specialty Shutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-20
How to Place an Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22
Custom Color Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24
Shutter Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
B A S E P R I C E L I S T • A U G U S T 2 0 0 6
TABLE OF CONTENTS
FEATURES
Effective August 2006
2GRABER®
Sheffield List (per sq ft)
Painted Wood Shutters Unfinished Panels – Paint Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $46.00 Hang Strip, Direct Mount, L-Frame and Extended L-Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.00 Z-Frame and Decorative Z-Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52.00 Bi-Fold or Bypass Inside Mount Track System (Inside Mount) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54.00
Stained Wood Shutters Unfinished – Stain Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.00 Hang Strip, Direct Mount, L-Frame and Extended L-Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54.00 Z-Frame and Decorative Z-Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56.00 Bi-Fold or Bypass Inside Mount Track System (Inside Mount) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58.00
Wood Specialty Shutters Perfect Arches
PRICING
Width 24" 32" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 108"
Price $1,135 1,258 1,258 1,432 1,432 1,432 1,630 1,630 1,755 3,893 4,709 5,137 5,650
Width 24" 32" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 108"
24" $1,090 1,384 1,511 1,665 1,670 1,709 1,936 2,040 2,044 2,620 5,414 5,685 5,969
36" 1,130 1,434 1,601 1,762 1,767 1,773 2,009 2,152 2,158 2,843 5,685 5,969 6,268
48" 1,479 1,522 1,658 1,825 1,831 1,874 2,119 2,230 2,237 4,028 5,969 6,268 6,581
54" 1,532 1,576 1,718 1,890 1,897 1,941 2,194 2,310 2,317 4,380 6,268 6,581 6,910
Crating Surcharge (for Arches over 75" wide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170.00 net
Additional Surcharges Cafe Shutter with 4-sided frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5% French Door Cut-Out* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $400.00 Hide-A-Tilt™ Hidden Tilt Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10% Bi-Fold or Bypass 3-sided Box Out (Outside Mount Only)** . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15% Bi-Fold or Bypass Decorative Cornice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No charge Bypass Stackback Surcharge** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5% Custom Color (Flat Fee Per Color) 75.00 net
Pull Knobs 1" Antique Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13.00 ea 1" Bright Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13.00 ea 1" Satin Nickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19.00 ea 1" Porcelain White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8.00 ea
*Calculate the overall square footage of the French Door panel using the L-Frame price, then add the surcharge.**Calculate the overall square footage of the Bypass or Bi-fold panels. Use the overall square footage to calculate the surcharge for the Box Out or Stackback surcharge.
Template Arches
Effective August 2006
3 GRABER®
QUALITY OF WOOD DEFINES A SHUTTER’S QUALITY
We use only 100% North American hardwood in the construction of our wood shutters because of its light weight, consistent color, hardness, structural stability, and attractive grain.
SOUND FORESTRY TECHNIQUES
We work only with foresters who practice “sustained yield forest management” – nearly twice as much hardwood grows as is harvested in the U.S. each year. The volume of hardwoods in American forests today is 90% larger than it was 50 years ago.
PRESERVING OUR NATURAL RESOURCES
Springs Wood Products consume recycled sawdust and wood shavings, generating the heat required to dry lumber, for a completely self-sufficient manufacturing process. Our Reynosa, Mexico, fabrication and finishing facility is 99.7% pollution free, above any U.S. standard.
SPRINGS WOOD PRODUCTS, GRAYLING, MICHIGAN
We have control over the quality of wood used – we control the process from green lumber to finished shutters. Hardwoods used in crafting Graber wood shutters are kiln dried and moulded at our Springs Wood Products facility in Grayling, Michigan. The wood is dried slowly to strict wood shutter specifications, because structural change can occur when moisture is removed. Moulding and sanding operations provide the highest quality surface, free of defects.
SPRINGS FABRICATION AND FINISHING, REYNOSA, MEXICO
At our state-of-the art finishing plant in Reynosa, Mexico, components are carefully sorted prior to fabrication for color uniformity and wood characteristics. We sort wood as an end user, rather than a finishing vendor, taking out defects in a climate-controlled building. Each shutter is hand-made by craftsmen to your client’s custom needs. To finish the shutter, we use only high quality paints and stains; on-site certified color technicians provide both application and quality control.
WHAT MAKES GRABER TRADITIONS SHUTTERS DIFFERENT FROM THE REST?
• Wood shutters are made from 100% North American Hardwoods – the premier wood used in the construction of shutters
• Springs Wood Products and Finishing facilities provide state-of-the-art technologies and processes
• Expanded choice of finishes with PureGrain™ Finish – vibrant stains that showcase the natural grain of the wood
• Offer the only national Custom Color Match program in the industry – color choices that no one has ever seen in custom wood shutters before
• An outstanding selection of styles, louvers (including 4½" size), frames and arches
• The best Customer Service team in the industry-trained to answer any questions about Graber Traditions Shutters
• Limited Lifetime Warranty
THE GRABER WOOD STORY
Wood used to manufacture Graber wood shutters has many natural characteristics which make it truly unique… no two pieces of hardwood are alike. The following are all natural characteristics of wood and we do not consider them to be defects:
• Grain – The direction, size, and appearance of wood fibers vary greatly depending on where the wood is cut from within the tree
• Burl – Formed from an irregular growth on the outer edge of the tree
• Bird’s Eye – Small area on the surface of the board where fibers are contorted to form circular figures that resemble birds’ eyes
• Knots – Vary in size, shape, structure and color
• Mineral Marks – Dark or discolored area caused by minerals which the tree extracts from the soil; can be either a streak or a stain, usually blackish blue
Natural variations in color and grain effect are inherent in the beauty of wood. These variations are within established industry guidelines and should be expected. In addition, shutters may stain slightly darker or lighter than the samples shown.
Flat Grain
Grain Change
Mineral Marks
Tiger Striping
Burl/Bird’s Eye
Knots
GRABER WOOD CHARACTERISTICS
GRABER WOOD CHARACTERISTICS
Effective August 2006
4GRABER®
GENERAL PRODUCT INFORMATION
Use this information to educate your client on the process of having Graber Traditions™ Shutters custom made for their home.
MOUNTINGWindow Molding: Shutter frames can be installed around, on top of, or in place of existing window molding.
• Mounting around molding – The frame height needs to project enough to allow for louver operation (see page 11)
• Mounting on molding – The molding needs to be flat enough (installation onto wood molding only) so the frame will sit plumb and level, and wide enough to allow a screw to be driven through it without splitting the wood
• Mounting in place of existing molding – The shutter frame selected must be wide enough to cover the same areas as the molding that is removed
Windowsills: An existing windowsill may offer a decorative element to a room. Shutters can be customized to work with the windowsill.
• Outside mounts – L-frame may be ordered 4-sided or 4-sided inverted with a sill frame installed on the windowsill
• Inside mounts – Hang strip, direct mount, and Z-frame are available
PRODUCT ELEMENTS Divider Rails: Divider rails are used to provide additional support and light control. Can be ordered as an option to create a double hung look or for decorative effect.
Shutter panels over 72" tall (45" for 1¼" louver) or 30" wide will have a divider rail installed at the center of the panel (21⁄2" or 31⁄2" louver +/- 11⁄2"; 41⁄2" louver +/- 2") unless specified on the order form. Panels over 30" wide and 78" high require two divider rails. Divider rails may be ordered on panels less than 72". Divider rails require at least two louvers in each section. Maximum number of divider rails is two.
1¼" and 2½" louvers will have 2" wide divider rails.
3½" and 4½" louvers will have 3" wide divider rails.
Rabbet Stile: Used when two stiles meet, this feature creates a built in light block.
Tilt Bar: The factory will position the tilt bar in the center of each panel.
Hide-A-Tilt™ Hidden Tilt Bar: Tilt mechanism in the back of the shutter panel rather than the front.
Color Disclaimer: Due to the natural characteristics of wood, colors may vary slightly. To ensure proper color matches, shutters being mounted in the same room should be ordered at one time. Slight variations in color may also occur between the finished product and the color samples/literature.
* Top and Bottom Rail heights will vary.See page 25 for definitions.
Tilt Bar
Divider Rail
Bi-FoldBottom Rail*
T-Post
Frame
Stile
Top Rail*
Mouse Hole
Louver
Single Panel
Effective August 2006
5 GRABER®
Effective August 2006
6GRABER®
SHUTTER TYPES
Bi-Fold: Two panels are hinged together that fold together to lay flush.
Standard Panel: A rectangular shaped panel that can be installed using any frame style.
Bi-Fold Track System: Two or four panels are hinged together with a top and bottom track.
Bypass Track System: Shutter panels slide on a top track to open and close. The track system can be attached to a frame or mounted directly to a window casing or the ceiling. The most common approach is a 3-sided box out (see page 20) with floor guides. Louvers must be closed to slide on track.
Effective August 2006
7 GRABER®
SHUTTER FRAME AND HARDWARE OPTIONS
Frame OptionsL-Frames
• Outside mount only
• Frame type (see page 8)
– 2-sided
– 3-sided
– 3-sided invert
– 4-sided with sill bottom
– 4-sided with sill top
– 4-sided
Sill Frames
• Offered with both standard L- and Z- frames
• Not available on Extended L-frame, 2½" Signature or 3½" Legacy
Z-Frames
• Inside mount only
• Frame type (see page 8)
– 2-sided
– 3-sided
– 3-sided invert
– 4-sided with sill bottom
– 4-sided with sill top
– 4-sided
• 21⁄2" Signature and 31⁄2" Legacy or Standard
Hang Strip Frame
• Inside mount only
• Frame type
– 2-sided frames with top and bottom light blocks
• Includes adjustable wrap around hinge for easy installation
• Standard gap between shutter and window will be 1⁄8" to 3⁄16"
• Window opening must be square; diagonal measurements must be within ¼" difference.
Direct Mount
• Four sided light blocks
• Includes standard adjustable hinge
• Inside mount only
Light Block
• Included with hang strip, direct mount and three-sided frame type
T-Post
Wood
1 3/16" 5/8"
3/8"
¾"
1 3/16"
1 ½"
7/16"
1"
1 5/8"
¾"
1 3/16"
5/8"
Wood
1"
1 3/16"
5/8"
1 5/8"
1 5/16"
Extended L-Frame
23/32"
23/32"
1 15/16"
1"
¾"
1 ¾"
1 3/8"
1 1/16"
Signature Legacy
Hardware OptionsHinges
Select the hardware color that best fits your decor:
• Satin Nickel
• Antique Brass
• Bright Brass
• White
• Off White
Pull Knob*
Pull knobs add function and a decorative element
• 1" Satin Nickel
• 1" Antique Brass
• 1" Bright Brass
• 1" White
*Not available on Bypass shutters
2 ½" 3 ½"
Standard
3/4"
3/4"
3/4"
1 3/16"
3/4"
1 3/16"
4-sided
3-sided invert w sill
3-sided w sill
3-sided Invert
3-sided
2-sided
WOOD—Paints
Designer White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1055
Dover White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1683
Bone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1024
Snowflake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1603
Unfinished Paint Grade . . . . . . . . . . . . . . . . . . . . . . . . . . UFP*†
WOOD—Stains
Golden Oak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1030
Honey Maple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1013
Cherry Wood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1014
Dark Cherry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1316
Unfinished Stain Grade . . . . . . . . . . . . . . . . . . . . . . . . . . .UFS†
• Graber Traditions™ Blind Color Match (no charge; excludes Ash, Distressed, Bamboo and Sandblast)
• Competitive Color Match (No charge option. Shutter competitors only)
• Custom Color Surcharge Option (see pages 23-24 for details)
• Due to the nature of manufacturing, colors may vary slightly between dye lots. Please order shutters for the same room at one time. Slight variations may also occur between the finished products and the color samples (see wood characteristics on page 4).
STOCK COLORS AVAILABLE
* Unfinished paint grade panels will be primed. † Unfinished panels will require sanding before finishing.
SHUTTER PROGRAM OPTIONS
Sheffield Collection
2-sided
Hang strip with inside mount will be available only in 2-sided frame (vertical). We will provide the light block at no surcharge for hang strip with inside mount.
3-sided
Light block included at no charge.
3-sided inverted
Light block included at no charge.
4-sided with sill bottom
Not available with Extended L-Frame
4-sided with sill top
Not available with Extended L-Frame
4-sided
Effective August 2006
8GRABER®
FRAME TYPES
ADDITIONAL COLOR OPTIONS
Direct mount includes 4 light blocks at no charge.
1¼" LouverTraditional in style. Required clearance 1⁄8".
2½" LouverThe most traditional and widely used louver size; minimal window depth needed; shutters become the focal point of the room. Required clearance 3⁄4".
3½" LouverOffers more visibility and light control than a smaller louver; allows design flexibility when working with space around shutter. Required clearance 1¼".
4½" Louver Provides the greatest amount of visibility through the open louvers; looks most proportionate in a larger window; view beyond the window becomes more important – louvers almost disappear when open. Required clearance 13⁄4".
11⁄4" Louver 21⁄2" Louver 31⁄2" Louver 41⁄2" Louver
SHUTTER LOUVERS
LOUVER OPTIONS
LOUVER COMPARISON
Effective August 2006
9 GRABER®
Effective August 2006
10GRABER®
HIDDEN TILT
Hide-A-Tilt™ Hidden Tilt Option offers the tilt mechanism in the back of the shutter panel, eliminating the traditional tilt bar and creating an unobstructed view as well as a clean lineal appearance. A thin stainless steel tilt bar is attached to the louvers in the rear of the panel. Operation of the shutter is as simple as positioning one louver into position; all of the other louvers will follow.
Available on standard shutters, French doors, Bi-Fold or Bypass with 2½" and 3½" louvers. To measure for a Hide-A-Tilt use the traditional measuring procedure (page 12), plus check for additional ½" clearance in the back of the shutter.
Effective August 2006
11 GRABER®
1-1/4
3/4
1-3/4
2-1/2
3-1/2
4-1/2
1.0
1-1/4
Louver Depth Clearance
CLEARANCE FOR LOUVERS
Panel Size Limitation: SHEFFIELD
MINIMUM MAXIMUM
DESCRIPTION 11⁄4" 21⁄2"/31⁄2" 41⁄2" 11⁄4" 21⁄2"/31⁄2"/41⁄2"
Single Panel Width (Regular) 8" 10" 10" 18" 36"
Single Panel Width (Bi-Fold) 8" 10" 10" 18" 26"
Panel Height 15" 15" 20" 96" 120"*
Bi-Fold Track System Width N/A 10" N/A N/A 208"*!
Bypass Track System Width N/A 10" N/A N/A 284.5"*!
Size Limitations
Arch Shutter Size Limitation (Wood only) ARCH WIDTH ARCH HEIGHT
DESCRIPTION MINIMUM MAXIMUM MINIMUM MAXIMUM
Perfect 20" 108"*! 10" 54"
Eyebrow 20" 108"*! 10" 48"
Elongated 20" 108"*! 10" 70"
*Frames 96" or wider or track 144" or over may be spliced.!Not available with 4½" louvers.
*Arches wider than 75" require a center support.!Arches over 75" will be crated. See page 2 for crate charge.
Effective August 2006
12GRABER®
Window Opening Measurement (Inside Mount with Hang Strips, Direct Mount or Z-Frame)
Measure the width at three points and the height at three points. Use the smallest width and height measurements.
Confirm that the window is square.
Measure the diagonals. If the difference between the two measurements is greater than ¼", an outside mount shutter is required.
MEASURING
Not OKOK
Frame to Frame Measurement (Outside Mount L-Frame Only)
Place a sample of the L-frame on the window frame or wall to determine frame-to-frame placement.
Measure frame-to-frame width at three points and frame to frame height at three points. Use the largest width and height measurements.
NOTE: At least 13⁄4" flat surface is needed on eachside of the window for an L-Frame.
Effective August 2006
13 GRABER®
SPECIFYING DIVIDER RAIL LOCATION
For frame to frame shutter measurement, measure from the bottom of the frame to the center point of the divider rail location. For window opening measurements, measure from the sill or the bottom of the window opening.
Effective August 2006
14GRABER®
Single Panel L R
Two Panels
LR LTR
LL RR
Three Panels
LTLR
LRTR
LLR
LLTR
LTLTR
LTRTR
LRR
LTRR
Four Panels LRTLR LTLRTR
RTR
LTRTLTR
LLRR LLTRR
SixPanels
LRTLRTLR LTRTLTRTLTR
LTLLRRTR
LLTLRTRR
LTLLTRRTR
LLTLTRTRR
LTL
Single Panel
Two Panels
Three Panels
Four Panels
Six Panels
PANEL CONFIGURATIONS
STANDARD AND BI-FOLD PANEL
Effective August 2006
15 GRABER®
Perfect Arch
1. Width must be exactly 2(x) times the height.
2. No template required.
3. Order arch as frame-to-frame measurement.
4. Outside mount only.
5. All wood colors are available.
6. The arch has no tilt bar, the louvers open individually.
7. Allow sufficient wall space to mount. • < 24" wide: top frame 2" wide, bottom frame 1" wide
• > 45" wide: top frame 3" wide, bottom frame 2" wide
• < 80" wide: top frame 3" wide, bottom frame 3" wide
• > 108" wide: top frame 4" wide, center support louver (nonfunctioning), bottom frame 4" wide
8. Frame is 1" thick and may not match projection of other outside mount standard shutters.
Elongated Arch and Eyebrow Arch (Template required)
1. Outside mount only.
2. All wood colors are available.
3. The arch has no tilt bar, the louvers open individually.
4. Allow sufficient wall space to mount. • < 24" wide: top frame 2" wide, bottom frame 1" wide • > 45" wide: top frame 3" wide, bottom frame 2" wide • < 80" wide: top frame 3" wide, bottom frame 3" wide • > 108" wide: top frame 4" wide, center support louver
(nonfunctioning), bottom frame 4" wide
5. Frame is 1" thick and may not match projection of other outside mount standard shutters.
See template instructions on page 16.
Width
Height
H1 H2
Width
Height
Height
Width
Width Height
Min Max Min Max
20" 108"* 10" 54"
Width Height
Min Max Min Max
20" 108"* 10" 54"
Width Height
Min Max Min Max
20" 108"* 10" 70"
*Arches over 75" wide require a center stile for support. Crating charges will be applied to arches over 75".
Effective August 2006
SPECIALTY SHUTTERS
Perfect Arch
Eyebrow Arch
Elongated Arch
Effective August 2006
16GRABER®
24"Provide frame to frame measure (width) of shutter panels
below the arch if applicable
SPECIALTY SHUTTERS
1. Tape* paper over the window opening allowing plenty of overlap.
• Kraft type paper • Butcher paper • Lightweight poster paper that can be rolled without
creasing
2. Draw an exact outline of the window opening**. Be careful NOT to press in or crease the paper of the template while tracing. **Manufacturing will add allowances to the window opening: – Arches > 24" wide, manufacturing will add
approximately 3" to width and approximately 31⁄2" to height.
– Arches < 24" wide manufacturing will add approximately 3" to width and approximately 21⁄2" to height. Manufacturing will adjust width to match frame below.
NOTE: If arch is placed above panels, provide us with the
finished frame to frame measurement. Manufacturing will adjust finished arch width to match shutter frame below. Always provide a template of the window opening.
3. Remove the paper from the window opening and cut out the arch.
4. Place the template back on the window opening to verify size.
5. Mark the template with the following: • Room Side • Purchase Order Number • Customer’s Name • Company Name and Account Number • Provide frame to frame measure (width) of shutter
panels below the arch if applicable
6. Attach a copy of the purchase order to the template.
7. Roll template and place in a mailing tube.
8. DO NOT FOLD TEMPLATE!
9. Mail to: Springs Window Fashions
8467 Route 405 South P.O. Box 500 Montgomery, PA 17752 Attn: Shutter Department
Acceptable Materials for Making a Template • Kraft type paper • Butcher paper • Lightweight poster paper that can
be rolled without creasing
Non- Acceptable Materials for Making a Template • Newspaper • Wrapping paper • Tissue paper • Fabrics • Wood • Wax paper
If the material used to make a template stretches, tears easily, will not lay flat after being rolled, or will mark the product in any way, SWF will refuse to use the template and require a new one.
*Use only tape that will not pull off paint or wallpaper.
HOW TO MAKE A TEMPLATE
Effective August 2006
17 GRABER®
SPECIALTY SHUTTERS
• Shutters for French Doors are outside mount only• Single panels hinged on the same side as the door• Three options are available
• Two cut out options allow for handle function• See page 18 for French Door Cut-out Worksheet
L-Frame with Round Cut-out (Surcharge applies)
L-Frame L-Frame with Rectangular Cut-out (Surcharge applies)
FRENCH DOOR OPTIONS – SHEFFIELD COLLECTION
Effective August 2006
18GRABER®
SPECIALTY SHUTTERS
�������������������������������������������������������������������
��������������������
�����������������������
������������������������
������������������������������������������������������������������������ � ������������������������������������
���������� ���������������������������������������������������������������������������������������������������
���������������������������������������������������������������������������������������������������������������
��������������������������������������������������
������������
���������������������������������������
���������������������������������������
���������������������������������������
���������������������������������������
���������������������������������������
�� �������������������������������������
���������������������������������������
���������������������������������������
����������������������������������������
�� �������������������������������������
���������������������������������������
����������������������������������������
��������������������������������������������������������������������������������������������������������������������������������������������������������
�
�
�
�
�
�
�
���������������������
�
�
���
����
����������
�
�
����
������
����
��
�
��������������� ���������������������������������������������� ������������������������������������������������������������������������������������������������������������������������������������������������������������������
��� ������������������������������������������ ������������������������������������������ ������������������������������������������� ������������������������� ������������������������������������� ����������������������������������� ������������� ���������������������������� ������������������������������ ������������������������������������ ���������������������������������������������� �������������������������������������������
�����������
Effective August 2006
19 GRABER®
SPECIALTY SHUTTERS
BI-FOLD TRACK SYSTEM CONFIGURATION OPTIONS
LLLL LL
RRRR
LLLLRRRR
LLRR
RR
BYPASS TRACK SYSTEM CONFIGURATION OPTIONS
1L/1R 1L/1C/1R
1L/1C/1C/1R
2L/1C/1C/2R
2L/2C/2R
2L/2R
2L/2C/2C/2R
Effective August 2006
20GRABER®
SPECIALTY SHUTTERS
TRACK SYSTEMS
Bypass Track System
• Ideal solution for large windows and patio doors
• Outside mount with 3-sided box out is standard
• System consists of a double-top track and floor guides
Configuration Options:
– Outside Mount with Box Out
– Outside Mount without Box Out
– Inside Mount, minimum window depth 53⁄8"
Bypass Panel Configurations:
1L / 1R
Ordered width ÷ # of panels1L / 1C / 1R
1L / 1C / 1C / 1R
Bi-Fold Track System
Bi-Fold Track System
• System consists of top, bottom track and ¼" round as standard
Configuration Options:
– Outside Mount with Box Out
– Inside Mount, minimum window depth 35⁄8"
Bi-Fold Panel Configurations:
Number of panels per side x 1.5"
Ex: LLRR, 2 sided stackback 2 x 1.5" = 3" An additional 3" on each side is needed.
Stackback Option (available on Bypass or Bi-Fold Track Systems)
The stackback option allows for the shutter panels to clear the window opening, creating an unobstructed view.
Measure only the frame to frame area for outside mount with stackback. Factory will calculate the correct stackback needed.
Measuring for Outside Mount with Box Out
It is recommended that the Box Out Frame be mounted to a flat surface. Add trim or molding to the width and height of the opening of the window.
General Guidelines for Stackback: Use the formulas below to estimate the minimum additional space needed. Submit frame to frame measurement only, do not include additional width needed. Factory will calculate the additional frame length needed.
Effective August 2006
21 GRABER®
HOW TO PLACE AN ORDER
��������
�����
����
���
�����������
��������
������
���
���
����������������������������������������������
���
��������
�������������������������������������
���
����������������������������������������������
�������������������������������������������������
��������������������������������������������������
����������������������������������������������������
��������
���
������������������
������������������������������������
���������������
�����������������������
����������������������������������
����������������
����������������������
������������������������������������
���������������
����
��������������������
����������������������������������
����������������
�������������
����������
������������������������������������
���������������
�������
����������������
����������������������������������
����������������
������
����
��������������
����������������������������������
����������������
������������������������������������������������
���
���������������������������������������������
���
������
���������������������������������������
�����������
������������
�����������������������������
����
�����
��������������������
����������������������
������������������������������������������������
������������������������������������������������
������������������������������������������������
����
������������
�������������
������������
�����������
����������
���
�����
������
�����
���
�����
�����
�
�����
���
���
�����
�
����
�����
�����������
�������
����
�
���
�����
����
���
���
���
�����
���������
�����
����
�����
��
��������������
��������
�����������
����������
���������
������������������
�����
�����
�����
�����
�����
��
��
��
��
���
��
��
��
����
������
�����
���
����������
�����
����
���
����������
�����
����
������
�
�
���
������
�����
���
����������
�����
����
���
����������
�����
����
������
�
�
���
������
�����
���
����������
�����
����
���
����������
�����
����
������
�
�
���
������
�����
���
����������
�����
����
���
����������
�����
����
������
�
����
������
�����
���
����������
�����
����
���
����������
�����
����
������
�
�
���
������
�����
���
����������
�����
����
���
����������
�����
����
������
�
��������
�����
�����
��������
���������
����
�������
�������������
���������
����������������������������
�����������
��������
��������
������������������
��������������������
�������
������������
������������
�����������
����
�����������
����������
������
�����������������
�������������
�������������
����
���������
���������
�����������
����
�������
����
������������
�����
����
�������
�������
����
��������
����
�����
����
�������
�����
����
������������
�������
�����
�����
�����
������
���������������
�������
�����
��������������
����
����
���������
����
�����
����������
��������
����������������
�
����
�������
����
�����
�
������
����
�����������
��
Effective August 2006
22GRABER®
HOW TO PLACE AN ORDERG
RA
BER
TR
AD
ITIO
NS™
SH
UT
TER
S –
OR
DER
FO
RM
EX
PLA
NA
TIO
N
Use
the
fo
llow
ing
info
rmat
ion
to a
ssis
t yo
u in
the
co
mp
leti
on
of
the
Gra
ber
Tra
dit
ions
Shu
tter
s o
rder
fo
rm.
A
Shu
tter
Typ
e
W
= S
heffi
eld
– W
ood
B
Shu
tter
Sty
le
S
= S
tand
ard
Shu
tter
C =
Caf
é S
hutt
er
P
= P
erfe
ct A
rch
A =
All
Oth
er A
rche
s (te
mp
late
nee
ded
)
F
= F
renc
h D
oor
Cut
-out
FD =
Fre
nch
Doo
r w
ithou
t C
ut-o
ut
B
P =
Byp
ass
Trac
k S
yste
m
B
PS
= B
ypas
s Tr
ack
Sys
tem
with
Sta
ckb
ack
BF
= B
i-Fo
ld T
rack
Sys
tem
BF1
= B
i-Fo
ld T
rack
Sys
tem
with
One
Sid
ed S
tack
bac
k
B
F2 =
Bi-
Fold
Tra
ck S
yste
m w
ith T
wo
Sid
ed S
tack
bac
k
C
Col
or N
umb
er
S
heffi
eld
Col
ors
10
55
Des
igne
r W
hite
16
83
Dov
er W
hite
10
24
Bon
e
1603
S
now
fl ake
10
30
Gol
den
Oak
10
13
Hon
ey M
aple
10
14
Che
rry
Woo
d
1316
D
ark
Che
rry
C
US
C
usto
m C
olor
(see
pro
duc
t gu
ide
for
det
ails
)
UFP
U
nfi n
ishe
d P
aint
Gra
de
U
SP
U
nfi n
ishe
d S
tain
Gra
de
D
Louv
er S
ize
Sp
ecify
siz
e –
1¼ "
, 2½
", 3
½ ",
or
4½ "
E
Fram
e Ty
pe
D =
Dire
ct M
ount
H =
Han
g S
trip
L =
L-F
ram
e
E
L =
Ext
end
ed L
-Fra
me
SZ
= 2
½ "
Dec
orat
ive
Z-F
ram
e
LZ
= 3
½ "
Dec
orat
ive
Z-F
ram
e
Z
= Z
-Fra
me
F M
easu
re T
ype
WO
= W
ind
ow O
pen
ing;
fact
ory
will
aut
omat
ical
ly
take
allo
wan
ces
F to
F =
Fra
me-
to-F
ram
e; t
his
is t
he e
xact
fi ni
shed
sh
utte
r si
ze in
clud
ing
the
fram
e
G
Caf
é P
anel
Hei
ght
Ind
icat
e he
ight
of a
ctua
l pan
el if
diff
eren
t th
an
mea
sure
men
t. T
o b
e co
mp
lete
d w
hen
4-si
ded
fr
ame
is o
rder
ed.
H
Fram
e C
onfi g
urat
ion
D =
Dire
ct M
ount
2S =
2-s
ided
(han
g st
rip)
3S =
3-s
ided
3SI =
3-s
ided
inve
rted
4SS
= 4
-sid
ed w
ith s
ill
4S
IS =
4-s
ided
sill
top
4S =
4 s
ided
IM =
Insi
de
Mou
nt T
rack
Sys
tem
BO
= T
rack
Sys
tem
with
Box
Out
I N
umb
er o
f Pan
els
Ind
icat
e th
e nu
mb
er o
f pan
els
J
Pan
el C
onfi g
urat
ion
B
i-Fo
ld T
rack
Sys
tem
Byp
ass
Trac
k S
yste
m
K
T-P
ost
Loca
tions
Ind
icat
e th
e lo
catio
n of
eac
h T-
pos
t. M
easu
re T
-Pos
ts
from
the
left
.
L D
ivid
er R
ail L
ocat
ions
Ind
icat
e th
e lo
catio
n of
eac
h d
ivid
er r
ail.
Mea
sure
lo
catio
n fr
om t
he b
otto
m u
p.
M
Hin
ge C
olor
A =
Ant
ique
Bra
ss
B
= B
right
Bra
ss
N =
Sat
in N
icke
l
O
= O
ff W
hite
W
= W
hite
N
Mou
se H
ole
S =
sin
gle
(sta
ndar
d)
D =
dou
ble
O
Pul
l Kno
b
A
= A
ntiq
ue B
rass
B
= B
right
Bra
ss
N =
Sat
in N
icke
l
W
= W
hite
P
Pul
l Kno
b L
ocat
ion
Cen
ter
is t
he s
tand
ard
. S
pec
ify lo
catio
n if
othe
r th
an c
ente
r. M
easu
re fr
om t
he b
otto
m o
f the
shu
tter
fr
ame
or p
anel
up
to
the
loca
tion.
Ex:
Fra
me
to fr
ame
mea
sure
men
t w
ould
req
uire
mea
surin
g fr
om t
he e
dge
of
the
fram
e to
whe
re t
he p
ull k
nob
is t
o b
e lo
cate
d.
1L/1
R1L
/1C
/1R
1L/1
C/1
C/1
R
2L/1
C/1
C/2
R
2L/2
C/2
R
2L/2
R
2L/2
C/2
C/2
R
LLLL
LL
RRRR
LLLL
RRRR
LLRR
RR
Sin
gle
Pan
elL
R
Two
Pan
els
LRLT
R
LLR
R
Thr
eeP
anel
s
LTLR
LRT
R
LLR
LLT
R
LTLT
R
LTR
TR
LRR
LTR
R
Four
P
anel
sLR
TLR
LTLR
TR
LTLR
TR
LTR
TLT
R
LLR
RLL
TR
R
Six
Pan
els
LRT
LRT
LRLT
RT
LTR
TLT
R
LTLL
RR
TR
LLT
LRT
RR
LTLL
TR
RT
R
LLT
LTR
TR
R
Effective August 2006
23 GRABER®
CUSTOM COLOR MATCH FORM
�����������������������������������������������������������������������������
������������������������������������������������������������ � ������������������������������������������������������������
������������������������������������������������������������ � ����������������������������������������������������������
������������������������������������������������������������ � ����������������������������������������������������� �������������������������������������
���������������������������
�������������������������������������������������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������������������������������������������������������������
������ ��������������������������������������������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������� �����������������������������������������������������������
�������������������������������������������������������������������������������������������������������������������������������������������
����������������������������������������������������������������������������������������������������������������
������������������������������������������������������������������� � ����������������������������������������������������� ����
�����������������
�������������������������������� ���������������������������� � ������������������������������������������������������������
�����������������������������������������������������������
�����������������������
��������������������
���������������������������������
���������������������� ������������������������ ��������������������� ����������� ��������������������� ���������������������������������������
��������������������������� ����������
���������� �������������
������������������� �����������
Effective August 2006
24GRABER®
The only national Customer Color Program in the shutter industry! Choosing an appropriate color for Traditions Shutters is critical to pulling a room’s style all together. With our unique Custom Color Matching, your clients will never have to compromise on color again!
Just provide a color swatch or sample of the color you want to match – woodwork, wall coverings, paint, fabric – and our expert color technicians will provide a beautiful, and exact, color match to any color you or your client can imagine.
CUSTOM COLOR
GRABER TRADITIONS™ CUSTOM COLOR
1. Complete the Custom Color and Competitive Color Match Request Form (see page 23).
2. Supply Springs Window Fashions with a color sample. For best results, submit a 3" x 3" color sample.
3. Send the form and the sample to:
Springs Window Fashions 8467 Route 405 South P.O. Box 500 Montgomery, PA 17752 Attn: Shutter Department
4. Strike off approval is required for all shutter orders of six panels or more. Strike off requests for less than six panels must be indicated on the color match form.
5. Strike offs will be sent for approval within 10-14 days of receiving the color sample.
6. Once color approval is received, fabrication of the custom shutters will begin.
CUSTOM COLOR AND COMPETITIVE COLOR MATCH PROCESS
Effective August 2006
25 GRABER®
DEFINITIONS
Bi-Fold – Two panels are hinged together to lay flush against the window or wall.
Bi-Fold Track System – Two or more hinged panels on a track. Panels do not lay flush against the window or wall.
Bypass Track System – Two or more panels on an overhead track that slide and pass each other.
Box Out Frame – Track system frame option that creates an outside mount application consisting of a three-sided frame with or without a decorative valance.
Café Style Shutters – Shutter covers the lower portion of an opening. They can be made to any height within product specifications.
Direct Mount – Mounting the shutter panels directly to the window casing.
Divider Rail – A rail that divides the shutter panel into two horizontal sections. It is used to add strength to a tall panel or add a decorative touch.
Double Mouse Hole – Recess on the top and bottom rail allowing for the louvers to be completely closed in either direction.
Guide – Component part used with bypass configurations to lead the panels so that they do not project into the room.
Hang Strip – The mounting frame that is used for inside mounted shutter panels.
Inside Mount – A shutter that is mounted on the inside of an opening.
Light Block – Square rail that blocks light between the window sill and the shutter panel, used with inside mount, 2-sided frame and 3-sided frames.
Louvers – The movable fins inside the shutter panel.
Mouse Hole – Recess in the top rail of the panel that the lift rod rests in when the louvers are completely closed.
Outside Mount – A shutter that is mounted on the outside of an opening.
Panel – The part of the shutter that consists of a set of louvers, two rails and two stiles.
Rabbet Stile – A special cut on the stiles that allow the panels to overlap. Helps control light penetration between the panels.
Rails – The top and bottom solid portion of a panel that frames the louvers.
Square Window – Diagonal measurements must be within ¼" difference. Windows that are not square will need to have the shutter mounted to the outside of the window opening.
Stackback – Configuration that allows the panels of the bypass or bi-fold track system to completely slide beyond the window opening.
Stile – The vertical portion of the panel frame that the louvers are anchored to.
Strike Off – Sample color swatch to be approved prior to the production of the order.
Tilt Bar – A vertically mounted bar located on the front of the shutter used to open and close the louvers.
T-Post – A vertical post that divides the panel into two sections (used with wider shutters).
Window Depth – The distance from the surface of the wall to the closest part of the window (examples: latch, crank, frame, etc.).
Springs Window Fashions Middleton, WI www.graberblinds.com 19-0063-01 (8/06) 60273