toyota 80 series

8/2/2019 Toyota 80 Series

1/5


2/5

T16 - Frontal Protection Bar

TJM T16 Nudge Bars are designed to maintain the character of your vehicle.Light weight and fitting over the original bumper, they will provide protection tothe original bumper and grille.

76mm highly polished tube frame Driving light provision 4.7mm wall thickness tubing Optional stainless steel aerial bracket 5mm press formed centre brace Air Bag Compatible mounting system

80

SERIES

LANDCRUISER

NOTE: ON ALL BARS, DRIVING LIGHTS, WINCH, WINCH FRAME AND ROLLERS ARE OPTIONAL.

ALLOY BAR - 4mm channel design 3.2mm & 4.7mm tubing wall thickness High tensile chassis mounting bolts Provision for Electric and Ox Hydraulic

winches ADR approved indicators Polyurethane bumperettes for style Driving light provision Press formed communication aerial tab Highly polished finish

T15 - Frontal Protection Bar

TJM T15 Bars offer style and function, with innovativesafety features that are renowned from TJM. A sleekdesign with tapered wings ensures maximum approachangle is maintained. TJM T15 Bars are manufacturedin both steel and alloy....

STEEL BAR - 3mm channel design 2.5mm & 2.6mm tubing wall thickness High tensile chassis mounting bolts Provision for Electric and Ox Hydraulic winches ADR approved indicators Polyurethane bumperettes for style Driving light provision Press formed communication aerial tab Durable 'Black' powder coat finish

T1 - Frontal Protection BarTJM T1 Bars are functional, stylish and light weight. Utilising computer controlled precision formingthe TJM T1 Bar maintains the sleek lines of the vehicle.

5mm extruded structural grade alloy for maximum strength with 3.2mm wall thickness tubing ADR approved indicators Air Bag Compatible mounting system Polyurethane bumperettes for style Driving light provision Highly polished finish

OPTIONAL COLOR CODE FINISH

Multi Fit - Frontal Protection BarTJM Multi Fit Steel Winch Bars incorporate all the features of the standard T13 Bar, but is specificallydesigned to accommodate a variety of heavy duty winches, ( hydraulic and electric - up to 12,000lb ).TJM Multi-Fit Winch Bars have earned a reputation for reliability and performance under the toughestconditions.

STEEL BAR - 3mm channel design 2.5mm & 2.6mm tubing wall thickness High tensile chassis mounting bolts Provision for Electric/Hydraulic winches - up to 12,000lb ADR approved indicators Driving light provision Press formed communication aerial tab Durable 'Black' powder coat finish

Roof Rack-MAXIMUM DISTRIBUTED LOAD = 120KG

These fully welded, tried and proven TJM racks are available in steel or aluminium to suit the 80 SeriesL/C. The full length support rails are contoured to distribute load evenly over the length of the roof gutterand are attached by TJMs positive 2 way stainless steel clamping system with strips for protection ofthe vehicles paintwork. Steel racks, after phosphate washing, are finished in a black polyester powdercoat, while the lightweight corrosion free aluminium racks are finished in solatex powder coat. Availablein 1900mm long - 6 leg .OPTIONAL: Mesh floor or Heavy Duty Open Ended Tradesman design available.


3/5

Side Step Stylemaster II

TJM Stylemaster II Side Steps are manufactured fromanodised aluminium, are non-slip & include mouldedend caps. The steps are mounted to the vehicle sub-frame with black polyester powder-coated steelmounts.

Optional moulded splash guards are available.

Rear Bar RB8

Add style, protection and improved departure angle to the rear of the 80 Series Landcruiser with a TJMReplacement Rear Bar and OPTIONAL Tyre Carrier.

Designed to fit with most popular Class 4 towbars Constructed from steel plate Tread plate step on top of the bumper Durable 'Black' powder coat finish ADR, DOT and ECE approved stop, tail and signal lights Wiring looms are supplied

OPTIONAL SPARE WHEEL CARRIERS Heavy duty adjustable release catch with safety pin Automatic spring loaded locating mechanism Adjustable and lockable wheel mounting facility Greasable tapered pivot bearing Left and right hand sides available

Rear Tyre Carrier ( fits with O/E bumper bar )

The position of the original spare wheel under the 80 Series greatly reduces ground clearance anddeparture angle. This is resolved by fitment of the TJM Heavy Duty Tyre Carrier to the original bumperbar. Fits over the O/E bumper bar Automatic spring loaded locating mechanism Heavy duty adjustable release catch with safety pin Greasable tapered pivot bearing Adjustable and lockable wheel mounting facility Left hand side only available

OPTIONAL SPLASH GUARDS

Optional Painted Finish Shown

Optional Painted Finish Shown

Steel Side Bars with Checker Plate Step

TJM 3/4 Side Bars are manufactured from 50mm steel tube and are designed to offer protection to vehiclebody panels, wheel arches, flares and sills. The 3/4 Side Bars are mounted to the vehicle sub-frame with blackpolyester powder-coated steel mounts and are joined to the Frontal Protection Bar with TJM Side Bar Clamps.A powdercoated checker plate step tread provides easy access to the vehicle.

50mm Steel Tubing Engineered Steel Chassis Mounts

Powdercoated Checker Plate Step Tread

Durable 'Black' powder coat finish

Wheel Arch Flares - Fibreglass

The combination of wheels, tyres and flares can greatly enhance the style and appearance of any vehicle.Flares are essential when fitting wide wheels and tyres, to help protect paintwork from road grime,stones, and mud thrown up by the tyres. Available in two designs....

Standard Under Guard Style - Finished in White Gel Coat. Deluxe Original Equipment Style - Finished in Black Gel Coat

Painting (optional) is recommended to enhance vehicle styling and keep the wheel arch flares looking good.

Rubber Edging

Vehicle Guard

Deluxe Flare

DeluxeFlare Vehicle

Guard

VehicleBodywork

Mud GuardPiping

Flare

Standard FlareVehicleGuard


4/5

airtec

SnorkelAir Ram

Tube Clamp

Airtec Snorkel Body

Upper Snorkel BracketOriginal Air

Cleaner Assembly

Intermediate Snorkel Tube

TJM Airtec Snorkel

Four reasons why its important 4WD

engines should enjoy the TJM Airtec advantage.

1. Fitting an TJM Airtec Snorkel means the air supply is drawn from roof level providing

cooler and cleaner air to the engine.2. Because the air supply is drawn from roof level, dust is not as thick and plentiful

as in the engine bay or inner guard. This will help extend the life of the air cleaner

element, therefore reducing wear of vital components.

3. With the positively sealed TJM Airtec Snorkel, well above water level, you can

expect worry-free water crossings.

4. As the vehicle travels, the TJM Airtec Snorkel creates whats known as a ram air

effect, that has been often found to increase engine performance.

TJM XGS - Shock Absorbers

TJM XGS 4WD Suspension have a number of kitsavailable to meet specific needs.Towing, load carrying & ground clearance canall be improved while still retaining ride quality.Choose from standard height, raised or extraheavy duty hi-lift kits with TJM XGSX-panded Gas Charged Shock Absorbers.

TJM XGS - Coil Springs

TJM XGS Coil Springs are available in linear and progressive designs for most applications. They alsocome in various heights and load carrying capacities to enable the optimum suspension system to beachieved. TJM XGS Coil Springs are manufactured in Australia, using BHP Steel, and when matchedwith XGS X-Panded Gas Charged Shock Absorbers will enhance ride, handling and performance.TJM XGS Coil Springs are manufactured to exacting specifications on computer-controlled coilingmachines, the shot peened, load tested and supplied in a durable powder-coat finish. TJM XGSCoils are covered by an exclusive 3 year or 50,000 Kilometre Warranty. TJM XGS Coil Springs areavailable in standard height, raised or extra heavy duty.

TJM XGS - Accessories

STEERING DAMPER - For superior steering and shimmy control, fit a TJM XGS 35mm Big Bore SteeringDamper.

POLYAIR SPRINGS & BELLOWS SYSTEM - Coupled with TJM XGS springs and shock absorbers, the PolyairSpring further assists in solving suspension problems and greatly improves handling, ride height and stability ofyour vehicle. A pressure increase of between 5 to 25psi (Polyair) and 5 to 100psi (Bellows) will give a loadincrease of between 10 to 60%. Options include a Polyair Pressure Guage and In-Car Adjustment Kit.

CASTOR CORRECTION KITS - TJM XGS also offer Castor Correction Kits for vehicles with raised suspension, toeradicate vague steering feel and vehicle wander caused by incorrect castor angles.

FOR FURTHER INFORMATION REFER TO THE TJM XGS SUSPENSION BROCHUREOR CONTACT YOUR TJM DISTRIBUTOR

Castor Correction BushesPolyair In-Car-Adjustment Controls

Polyair Spring and typical fittment shown

TJM XGS Suspension Leaf Springs

TJM XGS Shock Absorbers

Steering Damper

OPTIONAL

Polyair

Guage


5/5

Winches Vehicle Recovery

TJM offer the Ox 10,000lb (hydraulic) and

Ox 10,000lb (electric), to assist with vehicle recovery.

Both winches include wire rope, roller fairlead guide,

free spooling clutch, automatic brake, and remote hand control.

Hydraulic winch requires individual vehicle hose kit.

Consult the TJM Recovery Brochure or yourTJM Distributor for further information.

TJM Dual Battery Systems and Trays

TJM have 2 Dual Battery Management Systems available for the Toyota 80 Series,

the TJM IBS and DBS Battery Management Systems.

IBS System

DBS System

Ox Vehicle Recovery EquipmentTJM offers a range of Ox Recovery Equipment including...

Snatch-um-Straps Winch Extension Straps Bow & D Shackles Tree Trunk Protectors Snatch Blocks Air Jacks Recovery Bag Wheel Covers Tow Hooks Drag Chains Ox Air Compressor

Ox 10,000lb Hydraulic Winch

Ox 10,000lb Electric Winch

TJM Battery Frame ( indicitive only )

Under Bonnet Mounted LED Status Display Manual Override Switch Starts On Main Battery 180amp Nagares Relay Spike Protection

Maintenance Free Installation Kit Included Swiss Made Quality & Technology 5 Year Australia Wide Warranty

Cabin Mounted Control Unit LED Status Display Charging Voltage Indicator 2 Voltage Indicators Manual Override Switch Auto Disconnect Function Starts On Main Battery

180amp Nagares Relay Spike Protection Maintenance Free Swiss Made Quality & Technology 5 Year Australia Wide Warranty

The TJM Dual Battery Frames are designed and laser cut from 2mm cold rolled steel and criticaljoints are fully precision MIG welded for maximum strength. Sandblasted and finished in an Anti-ScuffPolyester Powdercoat they are supplied complete with mounting hardware including battery clamps. 3Year Warranty.

Consult your TJM Distributor for further information.

Note: Both systems require battery, frame and auxiliary outlet.

toyota 80 series

Documents