totolink wireless router (a2004ns) user’s guide · of your totolink (a2004ns) wireless router....

j

0 HKBN_SETUP_ROUTER_TOTOLINK_160415

TOTOLINK Wireless Router

(A2004NS) User’s Guide

j


1 Get to know TOTOLINK (A2004NS) Wireless Router ......................................................... 2

A. Tech Specs - Connections and Expansion ................................................................. 2

B. System Requirements (bb500/ FibreHome500/ bb1000/ FibreHome1000) ................ 3

2 Connecting to TOTOLINK Router ....................................................................................... 4

3 Switching your broadband Internet service to HKBN ........................................................ 16

4 Factory default reset of TOTOLINK Router ....................................................................... 20

j


Get to know TOTOLINK (A2004NS) Wireless Router 路由器

1 Get to know TOTOLINK (A2004NS) Wireless Router

A. Tech Specs - Connections and Expansion

USB LED

LAN LED

WAN LED

5G LED

2.4G LED

CPU LED

Power LED

WPS Button

Power

Socket

Reset

Button

USB

Port WAN Port LAN Port

j


Get to know TOTOLINK (A2004NS) Wireless Router 路由器

1 Get to know TOTOLINK (A2004NS) Wireless Router

B. System Requirements (bb500/ FibreHome500/ bb1000/ FibreHome1000)

To ensure that you have a stable and speedy network, please refer to the following as a

recommended minimum system requirement:

Central Processing Unit (CPU) Intel Core2 Duo P8700/2.5 (3 GHz or above)

System Memory 4GB or above

Hard disk 64GB SATA II SSD (Min. I/O speed of 200MB/s)

Network Adaptor 100/1000M Network Adaptor

j


Connecting to TOTOLINK Router

2 Connecting to TOTOLINK Router

Make sure you have a LAN cable connected from the HKBN wall plate/ONT to the WAN port

of your TOTOLINK (A2004NS) wireless router. Using a second LAN cable, connect it from

the router LAN port to the computer LAN port. Once finished, switch on the power supply for

the router and turn on the computer.

Open your Internet browser, and input [http://192.168.1.1] using the address-bar and press

[Enter].

Choose [Internet Wizard] to start the setup.

Enter [admin] as the default username and password, click [OK].

http://192.168.1.1/

j




Choose [Manual Internet configuration] then click [Next].

Choose [DHCP method] then click [Next].

j




Choose [No MAC clone] and tick the box of [Allow a private internt IP address], click [Next].

Click [Save and Close].

j




Choose [Wireless Wizard] at main menu.

Click [Next].

j




Suggest to select [Others] as the country, then click [Next].

TOTOLINK (A2004NS) supports both 2.4GHz and 5GHz wireless connections. Create a

Wireless Network Name [SSID] for 2.4GHz network, click [Check SSID] to confirm the SSID

is available, then click [Next].

j


Internal Wi-Fi Network setup of TOTOLINK Router

2 Internal Wi-Fi Network setup of TOTOLINK Router

Click [Search best channel], when the search result show up, pick one of the [Best channel]

or [Available] channel, click [Next].

Confirming all settings are correct, click [Next].

j




Under wireless security setup, choose [WPAPSK/WPA2PSK] then click [Next].

Choose [AES] then click [Next].

j




Create a wireless password under [Network Key] and re-enter the password under [Confirm

the Network key], click [Next].

Confirm all settings are correct, click [Apply and Set 5GHz Wireless Network].

j




Suggest to select [Others] as the country, then click [Next].

Create a Wireless Network Name [SSID] for 5GHz network, click [Check SSID] to confirm the

SSID is available, then click [Next].

j




Click [Search best channel], when the search result show up, pick one of the [Best channel]

or [Available] channel, click [Next].

Confirm all settings are correct, click [Next].

j




Under wireless security setup, choose [WPAPSK/WPA2PSK] then click [Next].

Choose [AES] then click [Next].

j




Create a wireless password under [Network Key] and re-enter the password under [Confirm

the Network key], click [Next].

Confirm all settings are correct, click [Finish].

j


Switch your broadband Internet service to HKBN

3 Switching your broadband Internet service to HKBN

After logging into the router through your browser, click [Setup Tool].

Enter [admin] as the default username and password, click [OK].

j


Switch broadband service from other ISP to HKBN

3 Switch broadband service from other ISP to HKBN

Choose [Internet Setup] under [Basic Setup].

j




Choose [DHCP User], tick the box of [Allow private IP] and [Restart DHCP client if the physical

WAN link is reconnected.], then click [Apply].

Click [OK] to save the changes.

j




Click [Internet Status] under [Network] tab of [Advanced Setup]. Confirm the [Connection

Type] has changed to [DHCP User (Dynamic IP)], click [Save] at right top corner.

Click [OK] to save all configurations.

j


Factory default reset of TOTOLINK Router

4 Factory default reset of TOTOLINK Router

If the device is not accessible from the router setting page, you can reset to the factory default

setting by pressing the reset button:

1. Confirm your TOTOLINK router is switched on.

2. Press and hold the [Reset] button with a sharp object for 10 seconds until all LEDs change

to quick-flash, then release the button and wait for the router to reboot to its factory default

settings

3. Default Setting：

Username / Password IP Address

admin / admin 192.168.1.1

The Reset Button is located at the right side of the power supply.

Reset Button

totolink wireless router (a2004ns) user’s guide · of your totolink (a2004ns) wireless router....

Documents