total bs standards
DESCRIPTION
Total BS standardsTRANSCRIPT
BRITISH STANDARDS
BS 1722:-
Fences
BS 1722-1:2006
Specification for chain link fences
supersedes BS 1722-1:1999
ISBN 0 580 49501 9
£56.00 members, £112.00
non-membersB/201
BS 8442:2006
Miscellaneous road traffic signs
and devices. Requirements and
test methods
supersedes BS 873 Parts 1, 2, 4 and 7
ISBN 0 580 49279 6
£56.00 members, £112.00
non-membersB/509/3
BS 8887:-
Design for manufacture, assembly,
disassembly and end-of-life
processing (MADE)
BS 8887-1:2006
General concepts, process and
requirements
no current standard is superseded
ISBN 0 580 49335 0
£64.00 members, £128.00
non-membersTDW/4
BS 8888:2006
Technical product specification
(TPS). Specification
supersedes BS 8888:2004
ISBN 0 580 49398 9
£74.00 members, £148.00
non-membersTDW/4
BS 61535:2006
Installation couplers intended for
permanent connection in fixed
installations
no current standard is superseded
ISBN 0 580 49492 6
£64.00 members, £128.00
non-membersPEL/23
BS EN PUBLICATIONS
BS EN 480:-
Admixtures for concrete, mortar
and grout. Test methods
BS EN 480-14:2006
Determination of the effect on
corrosion susceptibility of
reinforcing steel by potentiostatic
electro-chemical test
no current standard is superseded
ISBN 0 580 49498 5
£28.00 members, £56.00
non-membersB/517/3
BS EN 539:-
Clay roofing tiles for discontinuous
laying. Determination of physical
characteristics
BS EN 539-2:2006
Test for frost resistance
supersedes BS EN 539-2:1998
ISBN 0 580 48760 1
£64.00 members, £128.00
non-membersB/542/3
BS EN 622:-
Fibreboards. Specifications
BS EN 622-2:2004
Requirements for hardboards
supersedes BS EN 622-2:1997
ISBN 0 580 49497 7
£34.00 members, £68.00
non-membersB/541
BS EN 1364:-
Fire resistance tests for
non-loadbearing elements
BS EN 1364-3:2006
Curtain walling. Full configuration
(complete assembly)
no current standard is superseded
ISBN 0 580 49390 3
£49.00 members, £98.00
non-membersFSH/22
BS EN 1614:2006
Health informatics. Representation
of dedicated kinds of property in
laboratory medicine
supersedes DD ENV 1614:1995
ISBN 0 580 49376 8
£34.00 members, £68.00
non-membersIST/35
BS EN 1995:-
Eurocode 5: Design of timber
structures
BS EN 1995-1:-
General
NA to BS EN 1995-1-1:2004
Common rules and rules for
buildings
no current standard is superseded
ISBN 0 580 49349 0
£28.00 members, £56.00
non-membersB/525/5
NA to BS EN 1995-1-2:2004
Structural fire design
no current standard is superseded
ISBN 0 580 49350 4
£28.00 members, £56.00
non-membersB/525/5
Page 1 of 81BS EN PUBLICATIONS
NA to BS EN 1995-2:2004
Bridges
no current standard is superseded
ISBN 0 580 49351 2
£28.00 members, £56.00
non-membersB/525/5
BS EN 2267:-
Aerospace series. Cables,
electrical, for general purpose.
Operating temperatures between
-55$0DC and 260$0DC
BS EN 2267-005:2006
UV laser printable. Product
standard
no current standard is superseded
ISBN 0 580 49471 3
£28.00 members, £56.00
non-membersACE/6/-/2
BS EN 2346:-
Aerospace series. Cable, electrical,
fire resistant. Operating
temperatures between -65$0DC
and 260$0DC
BS EN 2346-002:2006
General
no current standard is superseded
ISBN 0 580 49422 5
£28.00 members, £56.00
non-membersACE/6/-/2
BS EN 2346-003:2006
DL family, single core. Product
standard
no current standard is superseded
ISBN 0 580 49423 3
£28.00 members, £56.00
non-membersACE/6/-/2
BS EN 2346-004:2006
DN family, single UV laser
printable and multicore assembly.
Light weight. Product standard
no current standard is superseded
ISBN 0 580 49421 7
£28.00 members, £56.00
non-membersACE/6/-/2
BS EN 2591:-
Aerospace series. Elements of
electrical and optical connection.
Test methods
BS EN 2591-420:2006
Mechanical strength of rear
accessories
supersedes BS EN 2591-420:2001
ISBN 0 580 49435 7
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 2713:-
Aerospace series. Cables,
electrical, single and multicore for
general purpose. Operating
temperatures between -55$0DC
and 200$0DC
BS EN 2713-005:2006
Screened (spiral) and jacketed,
CO$d2 laser printable. Product
standard
no current standard is superseded
ISBN 0 580 49448 9
£28.00 members, £56.00
non-membersACE/6/-/2
BS EN 2713-009:2006
Screened (spiral) and jacketed,
YAG X3 laser printable. Product
standard
no current standard is superseded
ISBN 0 580 49442 X
£28.00 members, £56.00
non-membersACE/6/-/2
BS EN 2714:-
Aerospace series. Cables,
electrical, single and multicore for
general purpose. Operating
temperatures between -55$0DC
and 260$0DC
BS EN 2714-004:2006
Screened (braided) and jacketed,
ink jet printable. Product standard
no current standard is superseded
ISBN 0 580 49429 2
£28.00 members, £56.00
non-membersACE/6/-/2
BS EN 2714-005:2006
Screened (spiral) and jacketed,
CO$d2 laser printable. Product
standard
no current standard is superseded
ISBN 0 580 49449 7
£28.00 members, £56.00
non-membersACE/6/-/2
BS EN 2714-008:2006
Screened (braided) and jacketed,
UV laser printable. Product
standard
no current standard is superseded
ISBN 0 580 49425 X
£28.00 members, £56.00
non-membersACE/6/-/2
BS EN 2714-010:2006
Screened (braided) and jacketed,
YAG X3 laser printable. Product
standard
no current standard is superseded
ISBN 0 580 49426 8
£28.00 members, £56.00
non-membersACE/6/-/2
Page 2 of 81BS EN PUBLICATIONS
BS EN 2997:-
Aerospace series. Connectors,
electrical, circular, coupled by
threaded ring, fire-resistant or non
fire-resistant, operating
temperatures -65$0DC to
175$0DC continuous, 200$0DC
continuous, 260$0DC peak
BS EN 2997-001:2006
Technical specification
supersedes BS EN 2997-1:1997
ISBN 0 580 49563 9
£68.00 members, £136.00
non-membersACE/6/-/3
BS EN 2997-002:2006
Specification of performance and
contact arrangements
supersedes BS EN 2997-2:1997
ISBN 0 580 49564 7
£34.00 members, £68.00
non-membersACE/6/-/3
BS EN 2997-003:2006
Square flange receptacle. Product
standard
supersedes BS EN 2997-3:1997
ISBN 0 580 49565 5
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 2997-004:2006
Jam-nut mounted receptacle.
Product standard
supersedes BS EN 2997-4:1997
ISBN 0 580 49566 3
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 2997-005:2006
Hermetic square flange receptacle.
Product standard
supersedes BS EN 2997-5:1997
ISBN 0 580 49567 1
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 2997-006:2006
Hermetic jam-nut mounted
receptacle. Product standard
supersedes BS EN 2997-6:1997
ISBN 0 580 49568 X
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 2997-007:2006
Hermetic receptacle with round
flange attached by welding or
brazing. Product standard
supersedes BS EN 2997-7:1997
ISBN 0 580 49573 6
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 2997-008:2006
Plug. Product standard
supersedes BS EN 2997-8:1997
ISBN 0 580 49572 8
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 2997-009:2006
Protective cover for receptacle.
Product standard
supersedes BS EN 2997-9:1997
ISBN 0 580 49571 X
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 2997-010:2006
Protective cover for plug. Product
standard
supersedes BS EN 2997-10:1997
ISBN 0 580 49570 1
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 2997-011:2006
Dummy receptacle. Product
standard
supersedes BS EN 2997-11:1997
ISBN 0 580 49569 8
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3155:-
Aerospace series. Electrical
contacts used in elements of
connection
BS EN 3155-002:2006
List and utilization of contacts
no current standard is superseded
ISBN 0 580 49461 6
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3155-009:2006
Contacts, electrical, female, type A,
crimp, class S. Product standard
no current standard is superseded
ISBN 0 580 49462 4
£34.00 members, £68.00
non-membersACE/6/-/3
BS EN 3155-016:2006
Contacts, electrical, male, type A,
crimp, class S. Product standard
no current standard is superseded
ISBN 0 580 49463 2
£34.00 members, £68.00
non-membersACE/6/-/3
BS EN 3155-024:2006
Contacts, electrical, triaxial, size 8,
male, type D, crimp, class S.
Product standard
no current standard is superseded
ISBN 0 580 49464 0
£34.00 members, £68.00
non-membersACE/6/-/3
BS EN 3155-025:2006
Contacts, electrical, triaxial, size 8,
female, type D, crimp, class S.
Product standard
no current standard is superseded
ISBN 0 580 49465 9
£34.00 members, £68.00
non-membersACE/6/-/3
Page 3 of 81BS EN PUBLICATIONS
BS EN 3155-026:2006
Contacts, electrical, male, type A,
crimp, class R. Product standard
no current standard is superseded
ISBN 0 580 49159 5
£34.00 members, £68.00
non-membersACE/6/-/3
BS EN 3155-027:2006
Contacts, electrical, female, type A,
crimp, class R. Product standard
no current standard is superseded
ISBN 0 580 49158 7
£34.00 members, £68.00
non-membersACE/6/-/3
BS EN 3155-054:2006
Contacts, electrical, male
thermocouple NiAl, type C, crimp,
class T. Product standard
no current standard is superseded
ISBN 0 580 49466 7
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3155-055:2006
Contacts, electrical, female,
thermocouple NiAl, type C, crimp,
class T. Product standard
no current standard is superseded
ISBN 0 580 49467 5
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3155-056:2006
Contacts, electrical, male,
thermocouple NiCr, type C, crimp,
class T. Product standard
no current standard is superseded
ISBN 0 580 49468 3
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3155-057:2006
Contacts, electrical, female,
thermocouple NiCr, type C, crimp,
class T. Product standard
no current standard is superseded
ISBN 0 580 49469 1
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3155-058:2006
Contacts, electrical, coaxial, size
16, male, type D, solder, class R.
Product standard
no current standard is superseded
ISBN 0 580 49470 5
£34.00 members, £68.00
non-membersACE/6/-/3
BS EN 3155-065:2006
Contacts, electrical, male, type A,
crimp, class S, size 8. Product
standard
no current standard is superseded
ISBN 0 580 49336 9
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3155-066:2006
Contacts, electrical, female, type A,
crimp, class S, size 8. Product
standard
no current standard is superseded
ISBN 0 580 49337 7
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3475:-
Aerospace series. Cables,
electrical, aircraft use. Test
methods
BS EN 3475-501:2006
Dynamic cut-through
supersedes BS EN 3475-501:2002
ISBN 0 580 49430 6
£28.00 members, £56.00
non-membersACE/6/-/2
BS EN 3545:-
Aerospace series. Connectors,
electrical, rectangular, with sealed
and non-sealed rear, plastic
housing, locking device, operating
temperatures -55$0DC to
175$0DC
BS EN 3545-005:2006
Male coding and attachment
system for mounting on free
housing (plug). Product standard
no current standard is superseded
ISBN 0 580 49439 X
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3545-006:2006
Male coding and attachment
system for fitment on fixed housing
(receptacle). Product standard
no current standard is superseded
ISBN 0 580 49438 1
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3545-008:2006
Tools for assembly/removal of
coding and attachment systems.
Product standard
no current standard is superseded
ISBN 0 580 49472 1
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3682:-
Aerospace series. Connectors,
plug and receptacle, electrical,
rectangular, interchangeable insert
type, rack to panel, operating
temperature 150$0DC continuous
Page 4 of 81BS EN PUBLICATIONS
BS EN 3682-004:2006
Size 2 receptacle. Product
standard
no current standard is superseded
ISBN 0 580 49437 3
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3682-006:2006
Size 3 receptacle. Product
standard
no current standard is superseded
ISBN 0 580 49443 8
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3682-008:2006
Size 4 receptacle. Product
standard
no current standard is superseded
ISBN 0 580 49444 6
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3682-009:2006
Size 4 plug. Product standard
no current standard is superseded
ISBN 0 580 49434 9
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3716:-
Aerospace series. Connectors,
single-way with triaxial interface,
for transmission of digital data
BS EN 3716-004:2006
Solder plug. Product standard
no current standard is superseded
ISBN 0 580 49473 X
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3745:-
Aerospace series. Fibres and
cables, optical, aircraft use. Test
methods
BS EN 3745-501:2005
Optical fibre proof test
no current standard is superseded
ISBN 0 580 49459 4
£28.00 members, £56.00
non-membersACE/6/-/10
BS EN 3745-502:2005
Tensile strength for short length of
optical fibres
no current standard is superseded
ISBN 0 580 49457 8
£28.00 members, £56.00
non-membersACE/6/-/10
BS EN 4008:-
Aerospace series. Elements of
electrical and optical connection.
Crimping tools and associated
accessories
BS EN 4008-001:2006
Technical specification
no current standard is superseded
ISBN 0 580 49590 6
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 4008-002:2006
List of product standards
no current standard is superseded
ISBN 0 580 49589 2
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 4008-005:2006
Positioner for crimping tool
M22520/2-01. Product standard
no current standard is superseded
ISBN 0 580 49588 4
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 4008-006:2006
Positioner for crimping tool
M22520/7. Product standard
no current standard is superseded
ISBN 0 580 49587 6
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 4008-007:2006
Positioner for crimping tool
M22520/2-01. Product standard
no current standard is superseded
ISBN 0 580 49586 8
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 4008-008:2006
Positioner for crimping tool
M22520/7-01. Product standard
no current standard is superseded
ISBN 0 580 49585 X
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 4008-011:2006
Positioner for crimping tool
M22520/2-01. Product standard
no current standard is superseded
ISBN 0 580 49539 6
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 4008-012:2006
Positioner for crimping tool
M22520/2-01. Product standard
no current standard is superseded
ISBN 0 580 49540 X
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 4008-013:2006
Positioner for crimping tool
M22520/2-01. Product standard
no current standard is superseded
ISBN 0 580 49541 8
£28.00 members, £56.00
non-membersACE/6/-/3
Page 5 of 81BS EN PUBLICATIONS
BS EN 4199:-
Aerospace series. Bonding straps
for aircraft
BS EN 4199-001:2006
Technical specification
no current standard is superseded
ISBN 0 580 49419 5
£28.00 members, £56.00
non-membersACE/6/-/8
BS EN 4199-006:2006
Round braid copper conductors for
bonding straps, tin plated up to
150$0DC or nickel plated up to
260$0DC. Product standard
no current standard is superseded
ISBN 0 580 49420 9
£28.00 members, £56.00
non-membersACE/6/-/8
BS EN 4406:2006
Aerospace series. Paints and
varnishes. Two component cold
curing polyurethane coating.
Abrasion resistant
no current standard is superseded
ISBN 0 580 49533 7
£28.00 members, £56.00
non-membersACE/65/-/3
BS EN 4529:-
Aerospace series. Elements of
electrical and optical connection.
Sealing plugs
BS EN 4529-002:2006
Index of product standards
no current standard is superseded
ISBN 0 580 49474 8
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 4530:-
Aerospace series. Sealing sleeves
used in elements of connection
BS EN 4530-001:2006
Technical specification
no current standard is superseded
ISBN 0 580 49475 6
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 4533:-
Aerospace series. Fibre optic
systems. Handbook
BS EN 4533-001:2006
Termination methods and tools
no current standard is superseded
ISBN 0 580 49446 2
£68.00 members, £136.00
non-membersACE/6/-/10
BS EN 4533-002:2006
Test and measurement
no current standard is superseded
ISBN 0 580 49347 4
£56.00 members, £112.00
non-membersACE/6/-/10
BS EN 4533-003:2006
Looming and installation practices
no current standard is superseded
ISBN 0 580 49445 4
£49.00 members, £98.00
non-membersACE/6/-/10
BS EN 4533-004:2006
Repair, maintenance and
inspection
no current standard is superseded
ISBN 0 580 49447 0
£49.00 members, £98.00
non-membersACE/6/-/10
BS EN 4592:2006
Aerospace series. Paints and
varnishes. Test method for
determination of infrared
reflectance
no current standard is superseded
ISBN 0 580 49534 5
£28.00 members, £56.00
non-membersACE/65/-/3
BS EN 4604:-
Aerospace series. Cable, electrical,
for signal transmission
BS EN 4604-001:2006
Technical specification
no current standard is superseded
ISBN 0 580 49327 X
£28.00 members, £56.00
non-membersACE/6/-/2
BS EN 4604-002:2006
General
no current standard is superseded
ISBN 0 580 49328 8
£28.00 members, £56.00
non-membersACE/6/-/2
BS EN 4608:-
Aerospace series. Cable, electrical,
fire resistant. Single and twisted
multicore assembly, screened
(braided) and jacketed. Operating
temperatures between -65$0DC
and 260$0DC
BS EN 4608-001:2006
Technical specification
no current standard is superseded
ISBN 0 580 49431 4
£34.00 members, £68.00
non-membersACE/6/-/2
Page 6 of 81BS EN PUBLICATIONS
BS EN 4608-002:2006
General
no current standard is superseded
ISBN 0 580 49432 2
£28.00 members, £56.00
non-membersACE/6/-/2
BS EN ISO 4618:2006
Paints and varnishes. Terms and
definitions
supersedes BS EN 971-1:1996, BS
EN ISO 4618-2:2000 and BS EN ISO
4618-3:2000ISBN 0 580 49555 8
£74.00 members, £148.00
non-membersSTI/11
BS EN ISO 5350:-
Pulps. Estimation of dirt and shives
BS EN ISO 5350-1:2006
Inspection of laboratory sheets by
transmitted light
supersedes BS EN ISO 5350-1:1998
ISBN 0 580 49329 6
£49.00 members, £98.00
non-membersPAI/11
BS EN ISO 7886:-
Sterile hypodermic syringes for
single use
BS EN ISO 7886-4:2006
Syringes with re-use prevention
feature
no current standard is superseded
ISBN 0 580 49044 0
£49.00 members, £98.00
non-membersCH/84
BS EN ISO 10077:-
Thermal performance of windows,
doors and shutters. Calculation of
thermal transmittance
BS EN ISO 10077-1:2006
General
supersedes BS EN ISO 10077-1:2000
ISBN 0 580 49527 2
£64.00 members, £128.00
non-membersB/540
BS EN 10319:-
Metallic materials. Tensile stress
relaxation testing
BS EN 10319-2:2006
Procedure for bolted joint models
no current standard is superseded
ISBN 0 580 49535 3
£49.00 members, £98.00
non-membersISE/NFE/4/1
BS EN ISO 10328:2006
Prosthetics. Structural testing of
lower-limb prostheses.
Requirements and test methods
supersedes BS ISO 10328 Parts 1 to 8
ISBN 0 580 48702 4
£96.00 members, £192.00
non-membersCH/168
BS EN ISO 10426:-
Petroleum and natural gas
industries. Cements and materials
for well cementing
BS EN ISO 10426-1:2006
Specification
supersedes BS EN ISO 10426-1:2000
ISBN 0 580 49614 7
£64.00 members, £128.00
non-membersPSE/17
BS EN ISO 11254:-
Lasers and laser-related
equipment. Determination of
laser-induced damage threshold of
optical surfaces
BS EN ISO 11254-3:2006
Assurance of laser power (energy)
handling capabilities
no current standard is superseded
ISBN 0 580 49594 9
£56.00 members, £112.00
non-membersCPW/172
BS EN 12097:2006
Ventilation for buildings.
Requirements for ductwork
components to facilitate
maintenance of ductwork systems
supersedes DD ENV 12097:1997
ISBN 0 580 49528 0
£28.00 members, £56.00
non-membersRHE/2
BS EN ISO 12156:-
Diesel fuel. Assessment of lubricity
using the high-frequency
reciprocating rig (HFRR)
BS EN ISO 12156-1:2006
Test method
supersedes BS EN ISO 12156-1:2000
ISBN 0 580 49405 5
£49.00 members, £98.00
non-membersMCE/22
BS EN ISO 12236:2006
Geosynthetics. Static puncture test
(CBR test)
supersedes BS EN ISO 12236:1996
which remains currentISBN 0 580 49410 1
£34.00 members, £68.00
non-membersB/553
DD CEN/TS 12390:-
Testing hardened concrete
DD CEN/TS 12390-9:2006
Freeze-thaw resistance. Scaling
no current standard is superseded
ISBN 0 580 49342 3
£28.00 members, £56.00
non-membersB/517/1
Page 7 of 81BS EN PUBLICATIONS
BS EN ISO 12543:-
Glass in building. Laminated glass
and laminated safety glass
BS EN ISO 12543-2:1998
Laminated safety glass
no current standard is superseded
ISBN 0 580 48018 6
£28.00 members, £56.00
non-membersB/520/1
BS EN 13203:-
Gas-fired domestic appliances
producing hot water. Appliances
not exceeding 70 kW heat input
and 300 l water storage capacity
BS EN 13203-2:2006
Assessment of energy
consumption
no current standard is superseded
ISBN 0 580 49378 4
£49.00 members, £98.00
non-membersGSE/29
BS EN ISO 13366:-
Milk. Enumeration of somatic cells
BS EN ISO 13366-2:2006
Guidance on the operation of
fluoro-opto-electronic counters
supersedes BS EN ISO 13366-2:1997
ISBN 0 580 49411 X
£49.00 members, £98.00
non-membersAW/5
BS EN 13412:2006
Products and systems for the
protection and repair of concrete
structures. Test methods.
Determination of modulus of
elasticity in compression
supersedes BS EN 13412:2002
ISBN 0 580 49512 4
£34.00 members, £68.00
non-membersB/517/8
BS EN ISO 13503:-
Petroleum and natural gas
industries. Completion fluids and
materials
BS EN ISO 13503-4:2006
Procedure for measuring
stimulation and gravel-pack fluid
leakoff under static conditions
no current standard is superseded
ISBN 0 580 49536 1
£49.00 members, £98.00
non-membersPSE/17/-/3
BS EN ISO 13732:-
Ergonomics of the thermal
environment. Methods for the
assessment of human responses
to contact with surfaces
BS EN ISO 13732-1:2006
Hot surfaces
supersedes BS EN 13202:2000 and
BS EN 563:1994ISBN 0 580 49451 9
£64.00 members, £128.00
non-membersPH/9/1
BS EN 13981:-
Aluminium and aluminium alloys.
Products for structural railway
applications. Technical conditions
for inspection and delivery
BS EN 13981-3:2006
Castings
no current standard is superseded
ISBN 0 580 49485 3
£34.00 members, £68.00
non-membersNFE/35
BS EN 14367:2005
Non controllable backflow
preventer with different pressure
zones. Family C, type A
no current standard is superseded
ISBN 0 580 47599 9
£56.00 members, £112.00
non-membersB/504
BS EN 14384:2005
Pillar fire hydrants
no current standard is superseded
ISBN 0 580 49516 7
£49.00 members, £98.00
non-membersFSH/17/1
BS EN 14455:2005
Devices to prevent pollution by
backflow of potable water.
Pressurised air inlet valves DN 15
to DN 50. Family L, type A and
type B
no current standard is superseded
ISBN 0 580 49317 2
£49.00 members, £98.00
non-membersB/504/4
BS EN 14487:-
Sprayed concrete
BS EN 14487-2:2006
Execution
no current standard is superseded
ISBN 0 580 49537 X
£34.00 members, £68.00
non-membersB/517/10
BS EN 14656:2006
Safety of machinery. Safety
requirements for extrusion presses
for steel and non-ferrous metals
no current standard is superseded
ISBN 0 580 49493 4
£64.00 members, £128.00
non-membersMCE/23
Page 8 of 81BS EN PUBLICATIONS
BS EN 14680:2006
Adhesives for non-pressure
thermoplastic piping systems.
Specifications
no current standard is superseded
ISBN 0 580 49494 2
£34.00 members, £68.00
non-membersPRI/52
BS EN 14693:2006
Flexible sheets for waterproofing.
Waterproofing of concrete bridge
decks and other concrete surfaces
trafficable by vehicles.
Determination of the behaviour of
bitumen sheets during application
of mastic asphalt
no current standard is superseded
ISBN 0 580 49450 0
£28.00 members, £56.00
non-membersB/546/9
BS EN 14783:2006
Fully supported metal sheet and
strip for roofing, external cladding
and internal lining. Product
specification and requirements
no current standard is superseded
ISBN 0 580 49428 4
£49.00 members, £98.00
non-membersB/542/5
BS EN 14830:2006
Thermoplastics inspection
chamber and manhole bases. Test
methods for buckling resistance
no current standard is superseded
ISBN 0 580 49532 9
£34.00 members, £68.00
non-membersPRI/88/1/P1
DD CEN/TS 14938:-
Copper and copper alloys.
Determination of bismuth content
DD CEN/TS 14938-2:2006
FAAS method
no current standard is superseded
ISBN 0 580 48981 7
£13.00 members, £26.00
non-membersNFE/34
BS EN 14981:2006
Surface active agents.
Determination of content of high
boiling solvents in liquid detergents
by GLC
no current standard is superseded
ISBN 0 580 49576 0
£34.00 members, £68.00
non-membersCII/34
BS EN 15022:-
Copper and copper alloys.
Determination of tin content
BS EN 15022-3:2006
Low tin content. Flame atomic
absorption spectrometry method
(FAAS)
no current standard is superseded
ISBN 0 580 49476 4
£28.00 members, £56.00
non-membersNFE/34
BS EN 15036:-
Heating boilers. Test regulations
for airborne noise emissions from
heat generators
BS EN 15036-1:2006
Airborne noise emissions from heat
generators
no current standard is superseded
ISBN 0 580 49375 X
£56.00 members, £112.00
non-membersRHE/10
BS EN 15036-2:2006
Flue gas noise emissions at the
outlet of the heat generator
no current standard is superseded
ISBN 0 580 49400 4
£49.00 members, £98.00
non-membersRHE/10
BS EN 15114:2006
Textile floor coverings.
Classification of textile floor
coverings without pile
no current standard is superseded
ISBN 0 580 49499 3
£49.00 members, £98.00
non-membersPRI/3
BS EN 15154:-
Emergency safety showers
BS EN 15154-1:2006
Plumbed-in body showers for
laboratories
no current standard is superseded
ISBN 0 580 49395 4
£28.00 members, £56.00
non-membersLBI/18
BS EN 15154-2:2006
Plumbed-in eye wash units
no current standard is superseded
ISBN 0 580 49394 6
£28.00 members, £56.00
non-membersLBI/18
BS EN 15167:-
Ground granulated blast furnace
slag for use in concrete, mortar
and grout
BS EN 15167-1:2006
Definitions, specifications and
conformity criteria
supersedes BS 6699:1992 which
remains currentISBN 0 580 49352 0
£49.00 members, £98.00
non-membersB/517/4
Page 9 of 81BS EN PUBLICATIONS
BS EN 15167-2:2006
Conformity evaluation
supersedes BS 6699:1992 which
remains currentISBN 0 580 48933 7
£49.00 members, £98.00
non-membersB/517/4
BS EN 15183:2006
Products and systems for the
protection and repair of concrete
structures. Test methods.
Corrosion protection test
no current standard is superseded
ISBN 0 580 49325 3
£28.00 members, £56.00
non-membersB/517/8
DD CEN/TS 15404:2006
Solid recovered fuels. Methods for
the determination of ash melting
behaviour by using characteristic
temperatures
no current standard is superseded
ISBN 0 580 49575 2
£13.00 members, £26.00
non-membersPTI/17
DD CEN/TS 15408:2006
Solid recovered fuels. Methods for
the determination of sulphur (S),
chlorine (Cl), fluorine (F) and
bromine (Br) content
no current standard is superseded
ISBN 0 580 48567 6
£17.00 members, £34.00
non-membersPTI/17
DD CEN/TS 15410:2006
Solid recovered fuels. Method for
the determination of the content of
major elements (Al, Ca, Fe, K, Mg,
Na, P, Si, Ti)
no current standard is superseded
ISBN 0 580 49339 2
£17.00 members, £34.00
non-membersPTI/17
DD CEN/TS 15411:2006
Solid recovered fuels. Methods for
the determination of the content of
trace elements (As, Ba, Be, Cd,
Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb,
Sb, Se, Tl, V and Zn)
no current standard is superseded
ISBN 0 580 48569 2
£17.00 members, £34.00
non-membersPTI/17
DD CEN/TS 15412:2006
Solid recovered fuels. Methods for
the determination of metallic
aluminium
no current standard is superseded
ISBN 0 580 48570 6
£17.00 members, £34.00
non-membersPTI/17
DD CEN/TS 15413:2006
Solid recovered fuels. Methods for
the preparation of the test sample
from the laboratory sample
no current standard is superseded
ISBN 0 580 48571 4
£28.00 members, £56.00
non-membersPTI/17
BS EN ISO 16201:2006
Technical aids for disabled
persons. Environmental control
systems for daily living
no current standard is superseded
ISBN 0 580 49412 8
£49.00 members, £98.00
non-membersCH/173
BS EN ISO 18233:2006
Acoustics. Application of new
measurement methods in building
and room acoustics
no current standard is superseded
ISBN 0 580 49362 8
£56.00 members, £112.00
non-membersEH/1/6
BS EN ISO 18369:-
Ophthalmic optics. Contact lenses
BS EN ISO 18369-1:2006
Vocabulary, classification system
and recommendations for labelling
specifications
supersedes BS EN ISO 11539:1999,
BS EN ISO 8320-1:2003, BS EN ISO
8320-2:2001, BS EN ISO 8321-1:2002
and BS EN ISO 8321-2:2000ISBN 0 580 48521 8
£68.00 members, £136.00
non-membersCH/172/9
BS EN ISO 18369-2:2006
Tolerances
supersedes BS EN ISO 8321-1:2002
and BS EN ISO 8321-2:2000ISBN 0 580 48493 9
£34.00 members, £68.00
non-membersCH/172/9
BS EN ISO 22523:2006
External limb prostheses and
external orthoses. Requirements
and test methods
supersedes BS EN 12523:1999
ISBN 0 580 49413 6
£74.00 members, £148.00
non-membersCH/168
BS EN 50164:-
Lightning protection components
(LPC)
BS EN 50164-3:2006
Requirements for isolating spark
gaps
no current standard is superseded
ISBN 0 580 49414 4
£28.00 members, £56.00
non-membersGEL/81
BS EN 50194:-
Electrical apparatus for the
detection of combustible gases in
domestic premises
Page 10 of 81BS EN PUBLICATIONS
BS EN 50194-2:2006
Electrical apparatus for continuous
operation in a fixed installation in
recreational vehicles and similar
premises. Additional test methods
and performance requirements
no current standard is superseded
ISBN 0 580 49481 0
£34.00 members, £68.00
non-membersGEL/31/19
BS EN 55022:2006
Information technology equipment.
Radio disturbance characteristics.
Limits and methods of
measurement
supersedes BS EN 55022:1998 which
remains currentISBN 0 580 49521 3
£74.00 members, £148.00
non-membersGEL/210/11
BS EN 60068:-
Environmental testing
BS EN 60068-2-21:2006
Tests. Test U. Robustness of
terminations and integral mounting
devices
supersedes BS EN 60068-2-21:1999
which remains currentISBN 0 580 49211 7
£49.00 members, £98.00
non-membersEPL/501
BS EN 60318:-
Electroacoustics. Simulators of
human head and ear
BS EN 60318-5:2006
2 cm$u3 coupler for the
measurement of hearing aids and
earphones coupled to the ear by
means of ear inserts
supersedes BS 6111:1981
ISBN 0 580 49417 9
£34.00 members, £68.00
non-membersEPL/29
BS EN 60335:-
Household and similar electrical
appliances. Safety
BS EN 60335-2-102:2006
Particular requirements for gas, oil
and solid-fuel burning appliances
having electrical connections
supersedes BS EN 50165:1997 which
remains currentISBN 0 580 49403 9
£49.00 members, £98.00
non-membersCPL/61/35
BS EN 60371:-
Specification for insulating
materials based on mica
BS EN 60371-3-1:2006
Specifications for individual
materials. Commutator separators
and materials
supersedes BS EN 60371-3-1:1995
ISBN 0 580 49273 7
£34.00 members, £68.00
non-membersGEL/15/3
BS EN 60534:-
Industrial-process control valves
BS EN 60534-4:2006
Inspection and routine testing
supersedes BS 5793-4:1987
ISBN 0 580 49324 5
£49.00 members, £98.00
non-membersGEL/65/2
BS EN 60601:-
Medical electrical equipment
BS EN 60601-2-12:2006
Particular requirements for the
safety of lung ventilators. Critical
care ventilators
supersedes BS EN 794-1:1997
ISBN 0 580 49391 1
£64.00 members, £128.00
non-membersCH/121/3
BS EN 60819:-
Non-cellulosic papers for electrical
purposes
BS EN 60819-3-3:2006
Specifications for individual
materials. Unfilled aramid
(aromatic polyamide) papers
supersedes BS 7824-3.3:1995
ISBN 0 580 49274 5
£28.00 members, £56.00
non-membersGEL/15/3
BS EN 61212:-
Insulating materials. Industrial rigid
round laminated tubes and rods
based on thermosetting resins for
electrical purposes
BS EN 61212-3-2:2006
Specifications for individual
materials. Round laminated
moulded tubes
supersedes BS EN 61212-3-2:1996
ISBN 0 580 49489 6
£34.00 members, £68.00
non-membersGEL/15/3
BS EN 61300:-
Fibre optic interconnecting devices
and passive components. Basic
test and measurement procedures
Page 11 of 81BS EN PUBLICATIONS
BS EN 61300-3-32:2006
Examinations and measurements.
Polarization mode dispersion
measurement for passive optical
components
no current standard is superseded
ISBN 0 580 49480 2
£68.00 members, £136.00
non-membersGEL/86/2
BS EN 61534:-
Powertrack systems
BS EN 61534-21:2006
Particular requirements for
powertrack systems intended for
wall and ceiling mounting
no current standard is superseded
ISBN 0 580 49333 4
£28.00 members, £56.00
non-membersPEL/213
BS EN 61966:-
Multimedia systems and
equipment. Colour measurement
and management
BS EN 61966-2-4:2006
Colour management.
Extended-gamut YCC colour space
for video applications. xvYCC
no current standard is superseded
ISBN 0 580 49415 2
£34.00 members, £68.00
non-membersEPL/100
BS EN 61966-7-1:2006
Colour printers. Reflective prints.
RGB inputs
supersedes BS EN 61966-7-1:2002
which remains currentISBN 0 580 49416 0
£64.00 members, £128.00
non-membersEPL/100
BS EN 62071:-
Helical-scan compressed digital
video cassette system using 6,35
mm magnetic tape. Format D-7
BS EN 62071-1:2006
VTR specifications
supersedes BS EN 62071:2001 which
remains currentISBN 0 580 494772
£74.00 members, £148.00
non-membersEPL/100
BS EN 62071-2:2006
Compression format
supersedes BS EN 62071:2001 which
remains currentISBN 0 580 49478 0
£74.00 members, £148.00
non-membersEPL/100
BS EN 62071-3:2006
Data stream format
supersedes BS EN 62071:2001 which
remains currentISBN 0 580 49479 9
£49.00 members, £98.00
non-membersEPL/100
BS EN 62304:2006
Medical device software. Software
life-cycle processes
no current standard is superseded
ISBN 0 580 49532 9
£74.00 members, £148.00
non-membersCH/62/1
BS EN 62317:-
Ferrite cores. Dimensions
BS EN 62317-9:2006
Planar cores
supersedes BS EN 61860:2001
ISBN 0 580 49334 2
£34.00 members, £68.00
non-membersEPL/51
BS ENs IMPLEMENTED BY
AMENDMENTBS EN ISO 4404:-
Petroleum and related products.
Determination of the corrosion
resistance of fire-resistant
hydraulic fluids
BS EN ISO 4404-1:2006
Water-containing fluids
BS EN ISO 18857:-
Water quality. Determination of
selected alkylphenols
BS EN ISO 18857-1:2006
Method for non-filtered samples
using liquid-liquid extraction and
gas chromatography with mass
selective detection
BS IMPLEMENTATIONS
BS ISO 247:2006
Rubber. Determination of ash
supersedes BS 7164-5:1991
ISBN 0 580 49484 5
£28.00 members, £56.00
non-membersPRI/23
BS ISO 3408:-
Ball screws
BS ISO 3408-1:2006
Vocabulary and designation
supersedes BS 6101-3:1992
ISBN 0 580 49427 6
£49.00 members, £98.00
non-membersMTE/1
BS ISO 3408-4:2006
Static axial rigidity
supersedes BS 6101-4:1987
ISBN 0 580 49522 1
£49.00 members, £98.00
non-membersMTE/1
Page 12 of 81BS IMPLEMENTATIONS
BS ISO 3534:-
Statistics. Vocabulary and symbols
BS ISO 3534-1:2006
General statistical terms and terms
used in probability
supersedes BS ISO 3534-1:1993
ISBN 0 580 49597 3
£78.00 members, £156.00
non-membersSS/1
BS ISO 3534-2:2006
Applied statistics
supersedes BS ISO 3534-2:1993
ISBN 0 580 49559 0
£90.00 members, £180.00
non-membersSS/1
BS ISO 3547:-
Plain bearings. Wrapped bushes
BS ISO 3547-1:2006
Dimensions
supersedes BS ISO 3547-1:1999
ISBN 0 580 49523 X
£34.00 members, £68.00
non-membersMCE/12
BS ISO 3547-2:2006
Test data for outside and inside
diameters
supersedes BS ISO 3547-2:1999
ISBN 0 580 49524 8
£34.00 members, £68.00
non-membersMCE/12
BS ISO 3547-3:2006
Lubrication holes, grooves and
indentations
supersedes BS ISO 3547-3:1999
ISBN 0 580 49525 6
£34.00 members, £68.00
non-membersMCE/12
BS ISO 3547-4:2006
Materials
supersedes BS ISO 3547-4:1999
ISBN 0 580 49526 4
£28.00 members, £56.00
non-membersMCE/12
DD ISO/TS 3716:2006
Hydrometry. Functional
requirements and characteristics of
suspended-sediment samplers
no current standard is superseded
ISBN 0 580 49389 X
£17.00 members, £34.00
non-membersCPI/113
BS ISO 3826:-
Plastics collapsible containers for
human blood and blood
components
BS ISO 3826-3:2006
Blood bag systems with integrated
features
no current standard is superseded
ISBN 0 580 494918
£34.00 members, £68.00
non-membersCH/212
BS ISO/IEC 4909:2006
Identification cards. Financial
transaction cards. Magnetic stripe
data content for track 3
supersedes BS ISO 4909:2000
ISBN 0 580 49488 8
£49.00 members, £98.00
non-membersIST/17
BS ISO 5350:-
Pulps. Estimation of dirt and shives
BS ISO 5350-4:2006
Instrumental inspection by
reflected light using equivalent
black area (EBA) method
supersedes BS ISO 15319:1999
ISBN 0 580 49418 7
£34.00 members, £68.00
non-membersPAI/11
BS ISO 6980:-
Nuclear energy. Reference
beta-particle radiation
BS ISO 6980-3:2006
Calibration of area and personal
dosemeters and the determination
of their response as a function of
beta radiation energy and angle of
incidence
supersedes BS ISO 6980:1996
ISBN 0 580 49404 7
£49.00 members, £98.00
non-membersNCE/2
BS ISO/IEC 7813:2006
Information technology.
Identification cards. Financial
transaction cards
supersedes BS ISO/IEC 7813:2001
ISBN 0 580 49487 X
£28.00 members, £56.00
non-membersIST/17
BS ISO 8243:2006
Cigarettes. Sampling
supersedes BS ISO 8243:2003
ISBN 0 580 49340 7
£34.00 members, £68.00
non-membersAW/40
BS ISO 8587:2006
Sensory analysis. Methodology.
Ranking
supersedes BS 5929-6:1989
ISBN 0 580 49600 7
£49.00 members, £98.00
non-membersAW/12
Page 13 of 81BS IMPLEMENTATIONS
BS ISO 9028:2006
Rubber. Dissolution by acid
digestion
supersedes BS 7164-4:1990
ISBN 0 580 49438 7
£28.00 members, £56.00
non-membersPRI/23
BS ISO 9462:2006
Alpine ski bindings. Requirements
and test methods
supersedes BS ISO 9462:1993
ISBN 0 580 49561 2
£28.00 members, £56.00
non-membersSW/136
BS ISO/IEC 9796:-
Information technology. Security
techniques. Digital signature
schemes giving message recovery
BS ISO/IEC 9796-3:2006
Discrete logarithm based
mechanisms
no current standard is superseded
ISBN 0 580 49331 8
£74.00 members, £148.00
non-membersIST/33
BS ISO 10521:-
Road vehicles. Road load
BS ISO 10521-1:2006
Determination under reference
atmospheric conditions
no current standard is superseded
ISBN 0 580 49593 0
£56.00 members, £112.00
non-membersMCE/22
BS ISO 10521-2:2006
Reproduction on chassis
dynamometer
no current standard is superseded
ISBN 0 580 49592 2
£34.00 members, £68.00
non-membersMCE/22
BS ISO 10842:2006
Aircraft. Ground service
connections. Locations and types
no current standard is superseded
ISBN 0 580 49518 3
£34.00 members, £68.00
non-membersACE/57
BS ISO 11093:-
Paper and board. Testing of cores
BS ISO 11093-9:2006
Determination of flat crush
resistance
supersedes BS ISO 11093-9:1994
ISBN 0 580 49574 4
£28.00 members, £56.00
non-membersPAI/11
BS ISO 11418:-
Containers and accessories for
pharmaceutical preparations
BS ISO 11418-1:2005
Drop-dispensing glass bottles
no current standard is superseded
ISBN 0 580 49456 X
£28.00 members, £56.00
non-membersCH/212
BS ISO 11418-2:2005
Screw-neck glass bottles for
syrups
no current standard is superseded
ISBN 0 580 49455 1
£28.00 members, £56.00
non-membersCH/212
BS ISO 11418-3:2005
Screw-neck glass bottles (veral) for
solid and liquid dosage forms
no current standard is superseded
ISBN 0 580 49454 3
£28.00 members, £56.00
non-membersCH/212
BS ISO 11418-4:2005
Tablet glass bottles
no current standard is superseded
ISBN 0 580 49453 5
£28.00 members, £56.00
non-membersCH/212
BS ISO 13216:-
Road vehicles. Anchorages in
vehicles and attachments to
anchorages for child restraint
systems
BS ISO 13216-3:2006
Classification of child restraint
dimensions and space in vehicle
no current standard is superseded
ISBN 0 580 49529 9
£49.00 members, £98.00
non-membersAUE/7
BS ISO 13542:2006
Paper and board. Specification for
internal diameters of cores for reels
supersedes BS ISO 13542:1995
ISBN 0 580 49598 1
£28.00 members, £56.00
non-membersPAI/11
BS ISO 15028:2004
Plastics. Aromatic isocyanates for
use in the production of
polyurethanes. Determination of
hydrolysable chlorine
no current standard is superseded
ISBN 0 580 49530 2
£28.00 members, £56.00
non-membersPRI/82
BS ISO 15037:-
Road vehicles. Vehicle dynamics
test methods
Page 14 of 81BS IMPLEMENTATIONS
BS ISO 15037-1:2006
General conditions for passenger
cars
supersedes BS ISO 15037-1:1998
ISBN 0 580 49321 0
£49.00 members, £98.00
non-membersAUE/15
BS ISO 15064:2004
Plastics. Aromatic isocyanates for
use in the production of
polyurethanes. Determination of
the isomer ratio in
tuluenediisocyanate
no current standard is superseded
ISBN 0 580 49531 0
£34.00 members, £68.00
non-membersPRI/82
BS ISO 16592:2006
Microbeam analysis. Electron
probe microanalysis. Guidelines for
determining the carbon content of
steels using a calibration curve
method
no current standard is superseded
ISBN 0 580 49320 2
£34.00 members, £68.00
non-membersCII/9
BS ISO 16832:2006
Acoustics. Loudness scaling by
means of categories
no current standard is superseded
ISBN 0 580 49591 4
£34.00 members, £68.00
non-membersEH/1/1
BS ISO 17484:-
Plastics piping systems. Multi-layer
pipe systems for indoor gas
installations with a maximum
operating pressure up to and
including 5 bar (500 kPa)
BS ISO 17484-1:2006
Specifications for systems
no current standard is superseded
ISBN 0 580 49482 9
£56.00 members, £112.00
non-membersPRI/88/2/P6
BS ISO 17577:2006
Steel. Ultrasonic testing for steel
flat products of thickness equal to
or greater than 6 mm
no current standard is superseded
ISBN 0 580 49374 1
£34.00 members, £68.00
non-membersISE/72
BS ISO 18207:2006
Road vehicles. Trailers up to 3,5 t.
Control of welded towing brackets
for coupling ball after fatigue
testing
no current standard is superseded
ISBN 0 580 49517 5
£28.00 members, £56.00
non-membersAUE/8
BS ISO 19579:2006
Solid mineral fuels. Determination
of sulfur by IR spectrometry
no current standard is superseded
ISBN 0 580 49452 7
£28.00 members, £56.00
non-membersPTI/16
BS ISO/IEC 19794:-
Information technology. Biometric
data interchange formats
BS ISO/IEC 19794-8:2006
Finger pattern skeletal data
no current standard is superseded
ISBN 0 580 49560 4
£68.00 members, £136.00
non-membersIST/44
BS ISO 20282:-
Ease of operation of everyday
products
BS ISO 20282-1:2006
Design requirements for context of
use and user characteristics
no current standard is superseded
ISBN 0 580 49599 X
£56.00 members, £112.00
non-membersPH/9
BS ISO 21127:2006
Information and documentation. A
reference ontology for the
interchange of cultural heritage
information
no current standard is superseded
ISBN 0 580 49401 2
£78.00 members, £156.00
non-membersIDT/2/7
BS ISO 22198:2006
Textiles. Fabrics. Determination of
width and length
no current standard is superseded
ISBN 0 580 49402 0
£28.00 members, £56.00
non-membersTCI/24
BS ISO 22241:-
Diesel engines. NOx reduction
agent AUS 32
BS ISO 22241-1:2006
Quality requirements
supersedes DD ISO/PAS
22241-1:2005ISBN 0 580 49514 0
£28.00 members, £56.00
non-membersMCE/22
Page 15 of 81BS IMPLEMENTATIONS
BS ISO 22241-2:2006
Test methods
supersedes DD ISO/PAS
22241-2:2005ISBN 0 580 49513 2
£64.00 members, £128.00
non-membersMCE/22
BS ISO 22369:-
Crop protection equipment. Drift
classification of spraying
equipment
BS ISO 22369-1:2006
Classes
no current standard is superseded
ISBN 0 580 49595 7
£28.00 members, £56.00
non-membersAGE/15
BS ISO 23038:2006
Space systems. Space solar cells.
Electron and proton irradiation test
methods
no current standard is superseded
ISBN 0 580 48703 2
£28.00 members, £56.00
non-membersACE/68/-/1
DD ISO/PAS 27145:-
Road vehicles. Implementation of
WWH-OBD communication
requirements
DD ISO/PAS 27145-1:2006
General information and use case
definition
no current standard is superseded
ISBN 0 580 49543 4
£28.00 members, £56.00
non-membersAUE/16
DD ISO/PAS 27145-2:2006
Common emissions-related data
dictionary
no current standard is superseded
ISBN 0 580 49544 2
£56.00 members, £112.00
non-membersAUE/16
DD ISO/PAS 27145-3:2006
Common message dictionary
no current standard is superseded
ISBN 0 580 49545 0
£56.00 members, £112.00
non-membersAUE/16
DD ISO/PAS 27145-4:2006
Connection between vehicle and
test equipment
no current standard is superseded
ISBN 0 580 49546 9
£34.00 members, £68.00
non-membersAUE/16
PUBLISHED DOCUMENTS
PD 6692:2006
Asphalt. Guidance on the use of
BS EN 12697 "Bituminous
mixtures. Test methods for hot mix
asphalt"
no current standard is superseded
ISBN 0 580 49313 X
£68.00 members, £136.00
non-members
B/510/1
PD CEN/TR 15350:2006
Mechanical vibration. Guideline for
the assessment of exposure to
hand-transmitted vibration using
available information including that
provided by manufacturers of
machinery
no current standard is superseded
ISBN 0 580 48886 1
£56.00 members, £112.00
non-membersGME/21/6
PD CEN/TR 15449:2006
Geographic information.
Standards, specifications, technical
reports and guidelines, required to
implement spatial data
infrastructure
no current standard is superseded
ISBN 0 580 49490 X
£74.00 members, £148.00
non-membersIST/36
AEROSPACE SERIES
BS F 152:2006
Properties of silicone rubber sheet,
mouldings and extrusions (general
purpose). Specification
no current standard is superseded
ISBN 0 580 49383 0
£28.00 members, £56.00
non-membersACE/65
BS F 153:2006
Properties of oil resistant silicone
rubber sheet, mouldings and
extrusions. Specification
no current standard is superseded
ISBN 0 580 49384 9
£28.00 members, £56.00
non-membersACE/65
BS F 154:2006
Properties of fluorosilicone rubber
sheet, mouldings and extrusions.
Specification
no current standard is superseded
ISBN 0 580 49385 7
£34.00 members, £68.00
non-membersACE/65
BS F 156:2006
Properties of fluid resistant
ethylene-propylene rubber sheet,
mouldings and extrusions.
Specification
no current standard is superseded
ISBN 0 580 49386 5
£34.00 members, £68.00
non-membersACE/65
Page 16 of 81AEROSPACE SERIES
BS F 157:2006
Properties of high tear strength
silicone rubber sheet, mouldings
and extrusions. Specification
no current standard is superseded
ISBN 0 580 49387 3
£34.00 members, £68.00
non-membersACE/65
BS F 159:2006
Properties of elastomeric toroidal
sealing rings ("O" rings)
manufactured from oil resistant
silicone rubber material conforming
to BS F 153. Specification
no current standard is superseded
ISBN 0 580 49380 6
£28.00 members, £56.00
non-membersACE/65
BS F 162:2006
Properties of elastomeric toroidal
sealing rings ("O" rings)
manufactured from
ethylene-propylene rubber material
conforming to BS F 156.
Specification
no current standard is superseded
ISBN 0 580 49381 4
£28.00 members, £56.00
non-membersACE/65
BS F 164:2006
Properties of elastomeric toroidal
sealing rings ("O" rings)
manufactured from fluorosilicone
rubber material released to BS F
154. Specification
no current standard is superseded
ISBN 0 580 49382 2
£28.00 members, £56.00
non-membersACE/65
IT AND INFORMATION
MANAGEMENT
PUBLICATIONS AND
PRODUCTS
BIP 0067:2006
A guide to developing a retention
and disposal schedule for business
information
no current standard is superseded
ISBN 0 580 49099 8
£39.00 members, £39.00
non-members
PUBLICLY AVAILABLE
SPECIFICATIONSPAS 125:2006
Automotive services. Vehicle body
repair. Specification
no current standard is superseded
ISBN 0 580 49126 9
£32.00 members, £32.00
non-members
SPECIALIST BOOKS FROM
BSIBIP 0062:2006
IT service management collection
CD-ROM
no current standard is superseded
ISBN 0 580 49094 7
£160.99 members, £245.00
non-members
BIP 0068:2006
Delivering and managing real world
network security
no current standard is superseded
ISBN 0 580 48985 X
£30.00 members, £30.00
non-members
BIP 2103:2006
Environmental management report.
Focus on environment & corporate
responsibility communications
no current standard is superseded
ISBN 0 580 48671 0
£95.00 members, £95.00
non-members
BIP 2116:2006
The translation service provider's
guide to BS EN 15038
no current standard is superseded
ISBN 0 580 49074 2
£25.00 members, £25.00
non-members
ELECTRONIC PRODUCTS
BIP 0060:2006
Spatial datasets for geographical
referencing. BS 7666 collection
CD-ROM
no current standard is superseded
ISBN 0 580 49289 3
£172.49 members, £335.00
non-members
BIP 3073:2006
Environment labelling and lifecycle
assessment CD-ROM
no current standard is superseded
ISBN 0 580 49283 4
£249.99 members, £300.00
non-members
BIP 3075:2006
Environment management systems
CD-ROM
no current standard is superseded
ISBN 0 580 49284 2
£249.99 members, £300.00
non-members
KITS, SETS, PACKS AND
SERIESKIT 192:2006
Information and documentation
standards kit
no current standard is superseded
ISBN 0 580 49060 2
£101.00 members, £202.00
non-members
Page 17 of 81KITS, SETS, PACKS AND SERIES
KIT 197:2006
BS 7666. Spatial datasets for
geographical referencing standards
kit
no current standard is superseded
ISBN 0 580 49460 8
£162.50 members, £325.00
non-members
AMENDMENTS TO BRITISH
STANDARDSBS 2000:-
Methods of test for petroleum and
its products
BS 2000-457:-
Bitumen and bituminous binders.
Characterization of perceptible
properties
BS 2738:-
Spectacle lenses
BS 2738-6:-
Ophthalmic optics. Uncut finished
spectacle lenses. Specification for
single-vision and multifocal lenses
BS 2738-7:-
Ophthalmic optics. Uncut finished
spectacle lenses. Specification for
progressive power lenses
BS 5400:-
Steel, concrete and composite
bridges
BS 5400-9.1:1983
Bridge bearings. Code of practice
for design of bridge bearings
CORRIGENDUM 1 AMD 16749
AMD 16749
B/525/10
BS 5950:-
Structural use of steelwork in
building
BS 5950-3.1:1990
Design in composite construction.
Code of practice for design of
simple and continuous composite
beams
CORRIGENDUM 1 AMD 16721
AMD 16721
B/525/4
BS 6400:-
Specification for installation,
exchange, relocation and removal
of gas meters with a maximum
capacity not exceeding 6 m$u3/h
BS 6400-2:2006
Medium pressure (2nd family
gases)
CORRIGENDUM 1 AMD 16716
AMD 16716
GSE/30
BS 7751:-
Prevailing torque type wire thread
inserts
BS 7751-1:1994
Specification for ISO metric coarse
pitch threads
AMENDMENT 1 AMD 16653
AMD 16653
FME/9
BS 7751-2:1994
Specification for ISO metric fine
pitch threads
AMENDMENT 1 AMD 16654
AMD 16654
FME/9
BS 7872:2002
Manned security services.
Cash-in-transit services (collection
and delivery). Code of practice
AMENDMENT 1 AMD 16744
AMD 16744
GW/3
BS 8473:2006
Intruder and hold-up alarm
systems. Management of false
alarms. Code of practice
CORRIGENDUM 1 AMD 16761
AMD 16761
GW/1
BS EN 250:2000
Respiratory equipment.
Open-circuit self-contained
compressed air diving apparatus.
Requirements, testing, marking
CORRIGENDUM 2 AMD 16683
AMD 16683
PH/4/7
BS EN 494:2004
Fibre-cement profiled sheets and
fittings. Product specification and
test methods
AMENDMENT 2 AMD 16726
AMD 16726
B/542/4
BS EN 1425:2000
(BS 2000-457:2000)
Methods of test for petroleum and
its products. Bitumen and
bituminous binders.
Characterization of perceptible
properties
AMENDMENT 1 AMD 16128
AMD 16128
PTI/13
BS EN 1463:-
Road marking materials.
Retroreflecting road studs
BS EN 1463-1:1998
Initial performance requirements
CORRIGENDUM 1 AMD 16773
AMD 16773
B/509/3
Page 18 of 81AMENDMENTS TO BRITISH STANDARDS
BS EN 1463-2:2000
Road test performance
specifications
CORRIGENDUM 1 AMD 16772
AMD 16772
B/509/2
BS EN 1846:-
Firefighting and rescue service
vehicles
BS EN 1846-2:2001
Common requirements. Safety and
performance
AMENDMENT 2 AMD 16686
AMD 16686
FSH/17
BS EN ISO 8980:-
Ophthalmic optics. Uncut finished
spectacle lenses
BS EN ISO 8980-1:2004
(BS 2738-6:2004)
Specifications for single-vision and
multifocal lenses
CORRIGENDUM 1 AMD 16710
AMD 16710
CH/172/3
BS EN ISO 8980-2:2004
(BS 2738-7:2004)
Specifications for progressive
power lenses
CORRIGENDUM 1 AMD 16708
AMD 16708
CH/172/3
BS EN 12809:2001
Residential independent boilers
fired by solid fuel. Nominal heat
output up to 50 kW. Requirements
and test methods
CORRIGENDUM 1 AMD 16547
AMD 16547
RHE/28
BS EN 12815:2001
Residential cookers fired by solid
fuel. Requirements and test
methods
CORRIGENDUM 1 AMD 16548
AMD 16548
RHE/28
BS EN 12899:-
Fixed, vertical road traffic signs
BS EN 12899-1:2001
Fixed signs
CORRIGENDUM 2 AMD 16697
AMD 16697
B/509
BS EN 13001:-
Crane safety. General design
BS EN 13001-1:2004
General principles and
requirements
CORRIGENDUM 1 AMD 16660
AMD 16660
MHE/3/1
BS EN 13001-2:2004
Load actions
CORRIGENDUM 1 AMD 16691
AMD 16691
MHE/3/1
DD CEN/TS 13001-3-2:2004
Limit states and proof of
competence of wire ropes in
reeving systems
CORRIGENDUM 1 AMD 16658
AMD 16658
MHE/3/1
BS EN 13135:-
Cranes. Safety. Design.
Requirements for equipment
BS EN 13135-1:2003
Electrotechnical equipment
CORRIGENDUM 1 AMD 16661
AMD 16661
MHE/3/1
BS EN 13240:2001
Roomheaters fired by solid fuel.
Requirements and test methods
CORRIGENDUM 1 AMD 16549
AMD 16549
RHE/28
BS EN 13956:2005
Flexible sheet for waterproofing.
Plastic and rubber sheets for roof
waterproofing. Definitions and
characteristics
CORRIGENDUM 1 AMD 16662
AMD 16662
B/546/2
BS EN 13965:-
Characterization of waste.
Terminology
BS EN 13965-2:2004
Management related terms and
definitions
CORRIGENDUM 1 AMD 16682
AMD 16682
B/508/3
BS EN 14872:2006
Bicycles. Accessories for bicycles.
Luggage carriers
CORRIGENDUM 1 AMD 16664
AMD 16664
GME/25
BS EN 15167:-
Ground granulated blast furnace
slag for use in concrete, mortar
and grout
Page 19 of 81AMENDMENTS TO BRITISH STANDARDS
BS EN 15167-1:2006
Definitions, specifications and
conformity criteria
CORRIGENDUM 1 AMD 16763
AMD 16763
B/517/4
BS EN 15167-2:2006
Conformity evaluation
CORRIGENDUM 1 AMD 16764
AMD 16764
B/517/4
BS EN 50338:2006
Safety of household and similar
electrical appliances. Particular
requirements for
pedestrian-controlled battery
powered electrical lawnmowers
CORRIGENDUM 1 AMD 16778
AMD 16778
CPL/61/23
BS EN 60079:-
Electrical apparatus for explosive
gas atmospheres
BS EN 60079-0:2006
General requirements
CORRIGENDUM 1 AMD 16698
AMD 16698
GEL/31
BS EN 60335:-
Household and similar electrical
appliances. Safety
BS EN 60335-2:-
Particular requirements
BS EN 60335-2-13:2003
Deep fat fryers, frying pans and
similar appliances
CORRIGENDUM 1 AMD 16727
AMD 16727
CPL/61/07
BS EN 60335-2-77:2006
Pedestrian controlled
mains-operated lawnmowers
CORRIGENDUM 1 AMD 16780
AMD 16780
CPL/61/23
BS EN 60335-2-102:2006
Gas, oil and solid-fuel burning
appliances having electrical
connections
CORRIGENDUM 1 AMD 16779
AMD 16779
CPL/61/35
BS EN 60601:-
Medical electrical equipment
BS EN 60601-1-8:2004
General requirements for safety.
Collateral standard. General
requirements, tests and guidance
for alarm systems in medical
electrical equipment and medical
electrical systems
AMENDMENT 1 AMD 16711
AMD 16711
CH/62/1
BS EN 60898:-
Electrical accessories.
Circuit-breakers for overcurrent
protection for household and
similar installations
BS EN 60898-2:2006
Circuit-breakers for A.C. and D.C.
operation
CORRIGENDUM 1 AMD 16750
AMD 16750
PEL/23/1
BS EN 60952:-
Aircraft batteries
BS EN 60952-1:2004
General test requirements and
performance levels
CORRIGENDUM 1 AMD 16687
AMD 16687
PEL/21
BS EN 60952-2:2004
Design and construction
requirements
CORRIGENDUM 1 AMD 16688
AMD 16688
PEL/21
BS EN 60952-3:2004
Product specification and
declaration of design and
performance (DDP)
CORRIGENDUM 1 AMD 16689
AMD 16689
PEL/21
BS EN 61000:-
Electromagnetic compatibility
(EMC)
BS EN 61000-4-30:2003
Testing and measurement
techniques. Power quality
measurement methods
CORRIGENDUM 1 AMD 16666
AMD 16666
GEL/210/8
BS EN 61770:2000
Electric appliances connected to
the water mains. Avoidance of
backsiphonage and failure of
hose-sets
AMENDMENT 2 AMD 16649
AMD 16649
CPL/61/14
BS ISO 4404:-
Petroleum and related products.
Determination of the corrosion
resistance of fire-resistant
hydraulic fluids
Page 20 of 81AMENDMENTS TO BRITISH STANDARDS
BS ISO 4404-1:2001
Water-containing fluids
AMENDMENT 1 AMD 16690
AMD 16690
PTI/16
BS ISO 10245:-
Cranes. Limiting and indicating
devices
BS ISO 10245-4:2004
Jib cranes
TECHNICAL CORRIGENDUM 1
AMD 16663
AMD 16663
MHE/3
BS ISO 16132:2004
Ductile iron pipes and fittings. Seal
coats for cement mortar linings
CORRIGENDUM 1 AMD 16709
AMD 16709
PSE/10
BS ISO 18857:-
Water quality. Determination of
selected alkylphenols
BS ISO 18857-1:2005
Method for non-filtered samples
using liquid-liquid extraction and
gas chromatography with mass
selective detection
AMENDMENT 1 AMD 16672
AMD 16672
EH/3/2
BS ISO 22762:-
Elastomeric seismic-protection
isolators
BS ISO 22762-1:2005
Test methods
TECHNICAL CORRIGENDUM 1
AMD 16669
AMD 16669
PRI/73
BS ISO 22762-2:2005
Applications for bridges.
Specifications
TECHNICAL CORRIGENDUM 1
AMD 16667
AMD 16667
PRI/73
BS ISO 22762-3:2005
Applications for buildings.
Specifications
TECHNICAL CORRIGENDUM 1
AMD 16668
AMD 16668
PRI/73
UPDATED BRITISH
STANDARDSBS EN 54:-
Fire detection and fire alarm
systems
BS EN 54-4:1998
Power supply equipment
AMENDMENT 2
£49.00 members, £98.00
non-membersFSH/12
BS EN 303:-
Heating boilers
BS EN 303-1:1999
Heating boilers with forced draught
burners. Terminology, general
requirements, testing and marking
AMENDMENT 1
£34.00 members, £68.00
non-membersRHE/10
BS EN 492:2004
Fibre cement slates and fittings.
Product specification and test
methods
AMENDMENT 2
£68.00 members, £136.00
non-membersB/542/4
BS EN ISO 717:-
Acoustics. Rating of sound
insulation in buildings and of
building elements
BS EN ISO 717-1:1997
Airborne sound insulation
AMENDMENT
£49.00 members, £98.00
non-membersEH/1/6
BS EN ISO 717-2:1997
Impact sound insulation
AMENDMENT 1
£34.00 members, £68.00
non-membersEH/1/6
BS EN 1097:-
Tests for mechanical and physical
properties of aggregates
BS EN 1097-2:1998
Methods for the determination of
resistance to fragmentation
AMENDMENT 1
£49.00 members, £98.00
non-membersB/502/6
BS EN 1562:1997
Founding. Malleable cast irons
AMENDMENT 1
£28.00 members, £56.00
non-membersISE/35
BS EN 12405:-
Gas meters. Conversion devices
BS EN 12405-1:2005
Volume conversion
AMENDMENT 1
£74.00 members, £148.00
non-membersGSE/25
Page 21 of 81UPDATED BRITISH STANDARDS
BS EN 12467:2004
Fibre-cement flat sheets. Product
specification and test methods
AMENDMENT 2
£68.00 members, £136.00
non-membersB/542/4
BS EN 13835:2002
Founding. Austenitic cast irons
AMENDMENT 1
£49.00 members, £98.00
non-membersISE/35
BS EN 60064:1996
Tungsten filament lamps for
domestic and similar general
lighting purposes. Performance
requirements
AMENDMENT 2
£74.00 members, £148.00
non-membersCPL/34/1
BS EN 60099:-
Surge arresters
BS EN 60099-4:2004
Metal-oxide surge arresters without
gaps for A.C. systems
AMENDMENT 1
£96.00 members, £192.00
non-membersPEL/37
BS EN 60335:-
Household and similar electrical
appliances. Safety
BS EN 60335-2:-
Particular requirements
BS EN 60335-2-7:2003
Washing machines
AMENDMENT 2
£49.00 members, £98.00
non-membersCPL/61/14
BS EN 60335-2-11:2003
Tumble dryers
AMENDMENT 2
£56.00 members, £112.00
non-membersCPL/61/14
BS EN 60601:-
Medical electrical equipment
BS EN 60601-1-2:2002
General requirements for safety.
Collateral standard.
Electromagnetic compatibility.
Requirements and tests
AMENDMENT 1
£78.00 members, £156.00
non-membersCH/62/1
SPECIAL ANNOUNCEMENTS
BS 7671:-
Requirements for electrical
installations (IEE wiring regulations
17th edition)
A new edition of BS 7671 is in
preparation and a draft is now
available for public comment.
Owing to its size, it is available in
hard copy only and can be ordered
from IET by either telephone
+44(0) 1438 767 328 or email
This draft includes changes
necessary to maintain technical
alignment with CENELEC
harmonization documents and
although the UK's ability to change
the requirements is limited, within
that constraint, comments on the
draft are welcome.
The draft will be available from 6
December 2006 and the deadline
for comments is 28 February,
2007. Comments on the draft are
to be submitted to
[email protected] using the
template which can be found on
the IET website at
www.theiet.org/DPC or
www.bsi-global.com/British_Standa
rds/Getting_involved/DPCs/instruct
ions.xalter
Contact: Debbie Stead
Email: [email protected]
JPEL/64
BS EN 50216:-
Power transformer and reactor
fittings
Page 22 of 81SPECIAL ANNOUNCEMENTS
BS EN 50216-3:2002 AMD 2
Protective relay for hermetically
sealed liquid-immersed
transformers and reactors without
gaseous cushion
This amendment, which will be
available shortly, implements
verbatim EN 50216-3/A2:2006 (see
CENELEC PUBLICATIONS
section of this magazine). It
specifies changes to clauses 6.2
(gas collection), 6.3 (leakage
detection), 6.5 (temperature
detection), 6.6 (temperature
indication) and 7.2 (breaking and
making capacity).
Contact: Keith Stiles
Email: [email protected]
PEL/14
BS EN 50338:2001
Safety of household and similar
electrical appliances. Particular
requirements for pedestrian
controlled battery powered
electrical lawn-mowers
In the November 2006 issue of
Update Standards, it was
announced that this standard had
been withdrawn following its
supersession by the new 2006
edition. Please be aware that this
was an error, and that this
standard will remain superseded
but current until 1 October 2008.
Any queries can be directed to the
Programme Manager (below).
Contact: Margaret Ryan
Email: [email protected]
CPL/61/23
ISO/FDIS 1409:2006
Plastics/rubber. Polymer
dispersions and rubber latices
(natural and synthetic).
Determination of surface tension
by the ring method
This reference document is being
proposed by PRI/50 for adoption
as an identical British Standard.
The UK voted positively during its
development as an ISO and the
intention is to adopt it. Copies of
the relevant Committee document
are available upon request from
the Programme Manager (below).
Contact: Charlotte Armstrong
Email:
BRITISH STANDARDS
PROPOSED FOR
CONFIRMATIONBS 131:-
Notched bar tests
BS 131-1:1961
The Izod impact test of metals
ISE/NFE/4/4
BS 131-4:1972
Calibration of pendulum impact
testing machines for metals
ISE/NFE/4/4
BS 131-5:1965
Determination of crystallinity
ISE/NFE/4/4
BS 4875:-
Strength and stability of furniture
BS 4875-1:2001
Requirements for the strength and
durability of the structure of
domestic and contract seating
FW/0
BS 7448:-
Fracture mechanics toughness
tests
BS 7448-1:1991
Method for determination of
K$dI$dc, critical CTOD and critical
J values of metallic materials
ISE/NFE/4/4
BS 7448-2:1997
Method for determination of
K$dI$dc, critical CTOD and critical
J values of welds in metallic
materials
ISE/NFE/4/4
BS 7448-4:1997
Method for determination of
fracture resistance curves and
initiation values for stable crack
extension in metallic materials
ISE/NFE/4/4
DD IEC TS 62143:2002
Electrical installations for lighting
and beaconing of aerodromes.
Aeronautical ground lighting
systems. Guidelines for the
development of a safety lifecycle
methodology
EPL/97
BRITISH STANDARDS
REVIEWED AND CONFIRMEDBS 2049:1976
Specification for kerosine (paraffin)
lighting appliances for domestic
use
CW/31
BS 3300:1974
Specification for kerosine (paraffin)
unflued space heaters, cooking
and boiling appliances for domestic
use
CW/31
Page 23 of 81BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 4747:-
Methods for determination of
saleable mass, in lots, of pulp
BS 4747-1:1995
Pulp baled in sheet form
BS 4747-3:1995
Unitized bales
BS 5173:-
Methods of test for rubber and
plastics hoses and hose
assemblies
BS 5173-102.8:1987
Hydraulic pressure tests. Pressure
impulse test for rigid helix
reinforced thermoplastics hoses
PRI/66
BS 5261:-
Copy preparation and proof
correction
BS 5261-1:2000
Design and layout of documents
IDT/2
BS 6069:-
Characterization of air quality
BS 6069-4.4:1993
Stationary source emissions.
Determination of the mass
concentration of sulfur dioxide.
Performance characteristics of
automated measuring methods
EH/2
BS 7706:1993
Guide to calibration and setting-up
of the ultrasonic time of flight
diffraction (TOFD) technique for
the detection, location and sizing of
flaws
WEE/46
BS 7896:1997
Securities. Specification for the
format and structure of names and
addresses used in securities
transactions for the business of
registrars
IST/12
BS EN 234:1997
Wallcoverings in roll form.
Specification for wallcoverings for
subsequent decoration
CW/35
BS EN 235:2002
Wallcoverings. Vocabulary and
symbols
CW/35
BS EN 259:-
Wallcoverings in roll form. Heavy
duty wallcoverings
BS EN 259-1:2001
Specifications
CW/35
BS EN 259-2:2001
Determination of impact resistance
CW/35
BS EN 547:-
Safety of machinery. Human body
measurements
BS EN 547-1:1997
Principles for determining the
dimensions required for openings
for whole body access into
machinery
PH/9
BS EN 547-2:1997
Principles for determining the
dimensions required for access
openings
PH/9
BS EN 547-3:1997
Anthropometric data
PH/9
BS EN 643:2002
Paper and board. European list of
standard grades of recovered
paper and board
PAI/11
BS EN ISO 801:-
Pulps. Determination of saleable
mass in lots
BS EN ISO 801-1:1997
(BS 4747-1:1995)
Pulp baled in sheet form
I/-
BS EN ISO 801-3:1997
(BS 4747-3:1995)
Unitized bales
I/-
BS EN 894:-
Safety of machinery. Ergonomics
requirements for the design of
displays and control actuators
BS EN 894-1:1997
General principles for human
interactions with displays and
control actuators
PH/9
Page 24 of 81BRITISH STANDARDS REVIEWED AND CONFIRMED
BS EN 894-2:1997
Displays
PH/9
BS EN 981:1997
Safety machinery. System of
auditory and visual danger and
information signals
PH/9
BS EN 1005:-
Safety of machinery. Human
physical performance
BS EN 1005-1:2001
Terms and definitions
PH/9/4
BS EN 1005-3:2002
Recommended force limits for
machinery operation
PH/9/4
BS EN 1541:2001
Paper and board intended to come
into contact with foodstuffs.
Determination of formaldehyde in
an aqueous extract
CW/47/3
BS EN ISO 2739:1998
Sintered metal bushes.
Determination of radial crushing
strength
ISE/65
BS EN ISO 2758:2003
Paper. Determination of bursting
strength
PAI/11
BS EN ISO 2759:2003
Board. Determination of bursting
strength
PAI/11
BS EN ISO 3325:1999
Sintered metal materials, excluding
hardmetals. Determination of
transverse rupture strength
ISE/65
BS EN ISO 5828:2001
Resistance welding equipment.
Secondary connecting cables with
terminals connected to
water-cooled lugs. Dimensions and
characteristics
WEE/29
BS EN ISO 7250:1998
Basic human body measurements
for technological design
PH/9/4
BS EN ISO 7284:1996
Resistance welding equipment.
Particular specifications applicable
to transformers with two separate
secondary windings for multi-spot
welding as used in the automobile
industry
WEE/29
BS EN ISO 7726:2001
Ergonomics of the thermal
environment. Instruments for
measuring physical quantities
PH/9/1
BS EN ISO 10427:-
Petroleum and natural gas
industries. Casing centralizers
BS EN ISO 10427-1:2002
Bow-spring casing centralizers
PSE/17
BS EN ISO 10551:2001
Ergonomics of the thermal
environment. Assessment of the
influence of the thermal
environment using subjective
judgement scales
PH/9/1
BS EN ISO 11064:-
Ergonomic design of control
centres
BS EN ISO 11064-1:2001
Principles for the design of control
centres
PH/9
BS EN ISO 11064-2:2001
Principles for the arrangement of
control suites
PH/9
BS EN ISO 11399:2001
Ergonomics of the thermal
environment. Principles and
application of relevant international
standards
PH/9
BS EN 12781:2001
Wallcoverings. Specification for
cork panels
CW/35
BS EN ISO 12894:2001
Ergonomics of the thermal
environment. Medical supervision
of individuals exposed to extreme
hot or cold environments
PH/9/1
BS EN 13085:2001
Wallcoverings. Specification for
cork rolls
CW/35
Page 25 of 81BRITISH STANDARDS REVIEWED AND CONFIRMED
BS EN ISO 13406:-
Ergonomic requirements for work
with visual display based on flat
panels
BS EN ISO 13406-1:1999
Introduction
PH/9
BS EN ISO 13406-2:2002
Ergonomic requirements for flat
panel displays
PH/9
BS EN ISO 13533:2002
Petroleum and natural gas
industries. Drilling and production
equipment. Drill-through equipment
PSE/17/-/4
BS EN 13676:2001
Polymer coated paper and board
intended for food contact.
Detection of pinholes
CW/47/3
BS EN ISO 13731:2002
Ergonomics of the thermal
environment. Vocabulary and
symbols
PH/9/1
BS EN ISO 15156:-
Petroleum and natural gas
industries. Materials for use in
H$d2S-containing environments in
oil and gas production
BS EN ISO 15156-1:2002
General principles for selection of
cracking-resistant materials
PSE/17
BS EN 21089:1992
Electrode taper fits for spot welding
equipment. Dimensions
WEE/29
BS EN 24003:1993
Permeable sintered metal
materials. Determination of bubble
test pore size
ISE/65
BS EN 27243:1994
Hot environments. Estimation of
the heat stress on working man,
based on the WBGT-index (wet
bulb globe temperature)
PH/9
BS ISO 1173:2001
Assembly tools for screws and
nuts. Drive ends for hand and
machine-operated screwdriver bits
and connecting parts. Dimensions,
torque testing
MTE/15
BS ISO 2725:-
Assembly tools for screws and
nuts. Square drive sockets
BS ISO 2725-3:2001
Machine-operated sockets
("non-impact"). Dimensions
MTE/15
BS ISO 6787:2001
Assembly tools for screws and
nuts. Adjustable wrenches
MTE/15
BS ISO 10102:2001
Assembly tools for screws and
nuts. Double-headed open-ended
engineers' wrenches. Length of
wrenches and thickness of the
heads
MTE/15
BS ISO 10103:2001
Assembly tools for screws and
nuts. Double-headed, flat and
offset, box wrenches. Length of
wrenches and thickness of the
heads
MTE/15
BS ISO 10104:2001
Assembly tools for screws and
nuts. Double-headed, deep offset
and modified offset, box wrenches.
Length of wrenches and thickness
of the heads
MTE/15
BS A 31-54:1951
Specification for British Association
(B.A.) low tensile screws and nuts
for aeronautical purposes
ACE/12
BS A 55 and 56:1951
Specifications for grub screws for
aeronautical purposes
ACE/12
BS A 101:1969
Specification for general
requirements for titanium bolts
ACE/12
BS 4A 170:1999
Specification for aluminium alloy,
mushroom-headed, slotted drive,
bolts (unified thread)
ACE/12
BS C 3:1964
Specification for aircraft material.
Coupling dimensions for aircraft
pressure re-oiling connection
ACE/12
Page 26 of 81BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 2C 4:1973
Specification for coupling
dimensions for aero-engine
refrigerant pressure replenishment
connections
ACE/12
BS 2C 5:1976
Specification for mating
dimensions for liquid oxygen
replenishment couplings
ACE/12
BS C 6:1966
Specification for aircraft engine
nacelle fire extinguisher doors
ACE/12
BS C 9:1970
Specification for coupling
dimensions for high pressure air
charging valves for aircraft
ACE/12
BS C 10:1958
Coupling dimensions for aircraft
ground air-conditioning
connections
ACE/12
BS C 16:1973
Specification for dimensions for
gaseous oxygen replenishment
couplings for aircraft
ACE/12
BS C 18:1976
Specification for V-flange couplings
for aircraft piping and ducting -
metric series
ACE/12
BS C 20:1986
Specification for aircraft gaseous
oxygen replenishment connection
(inch dimensions)
ACE/12
BS M 44:1974
Specification for identification of
aircraft servicing, maintenance,
ground handling and safety/hazard
points
ACE/12
BS M 48:1975
Specification for dimensions of
elastomeric toroidal sealing rings
for aerospace use. Inch series
ACE/12
BS 2SP 1:1927
Specification for aircraft material.
Shackles
ACE/12
BS 6SP 4:2000
Pins headed, plain shank, drilled,
steel alloy and corrosion resisting
steel with a strength class 880 / 1
080 MPa
ACE/12
BS SP 8:1939
Specification for turnbuckles
(tension rod type) for aircraft
purposes
ACE/12
BS SP 33-39:1951
Specifications for turnbarrels,
tension rods and swaged
cable-end connections for aircraft
ACE/12
BS SP 49 and 50:1953
Specifications for ball ends for
swaging on cable for aircraft
(suitable for 5 cwt. cable)
ACE/12
BS SP 51 and 52:1953
Specifications for identification tags
for swaged cable-end assemblies
for aircraft
ACE/12
BS SP 53:1953
Specification for swaged cable-end
assemblies (B.A. and B.S.F.
threads) for preformed steel wire
rope for aircraft (suitable for use
with British Standard W.9 wire
rope)
ACE/12
BS SP 54:1953
Specification for swaged cable-end
assemblies (B.A. and B.S.F.
threads) for preformed
non-corrodible steel wire rope for
aircraft (suitable for use with British
Standard W.11 wire rope)
ACE/12
BS SP 59 and SP 60:1955
Specifications for spring catches
for aeronautical purposes
ACE/12
BS SP 66 and SP 67:1955
Specifications for cable thimbles
for aircraft
ACE/12
BS SP 94:1964
Specification for bronze
oil-retaining bushes and thrust
washers for aircraft
ACE/12
BS 2SP 101-104:1956
Specifications for turnbarrels,
tension rods and swaged
cable-end connections (unified
threads) for aircraft
ACE/12
BS 2SP 105:1955
Specification for swaged cable-end
assemblies (unified threads) for
preformed steel wire rope (W.9) for
aircraft
ACE/12
Page 27 of 81BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 2SP 106:1955
Specification for swaged cable-end
assemblies (unified threads) for
preformed non-corrodible steel
wire rope (W.11) for aircraft
ACE/12
BS SP 114:1955
Specification for eye bolts (unified
threads) for aircraft
ACE/12
BS SP 118:1958
Tie rods (unified threads) for
aircraft
ACE/12
BS SP 119 and SP 120:1957
High tensile steel fork joints
(unified threads) for aircraft
ACE/12
BS SP 141:1970
Specification for design and
performance requirements for
toggle type panel fasteners
ACE/12
BS SP 164:1978
Specification for design and
performance requirements for
turnlock, stud-type panel fasteners
(metric series)
ACE/12
BS 6W 8:1938
Tie rods (swaged) (no. 4 B.A. to
$9H inch B.S.F. inclusive) for
aircraft purposes
ACE/12
BS 2W 11:1967
Specification for aircraft material.
Preformed corrosion-resisting steel
wire rope
ACE/12
BS W 13:1973
Specification for preformed
corrosion-resisting steel wire rope
(ISO diameters and strengths)
ACE/12
BRITISH STANDARDS
DECLARED OBSOLESCENTBS 9620:1975
Specification for quartz crystal
oscillators of assessed quality.
Generic data and methods of test
EPL/49
BS 6V 3:1943
Specification for aircraft material.
High strength plywood for aircraft
ACE/12
BS 3V 4:1929
Specification for aircraft material.
Ash
ACE/12
BS 2V 35:1966
Specification for plywood for
aeronautical purposes
ACE/12
BS 2V 37:1968
Specification for Sitka spruce as
finished timber
ACE/12
BS V 38:1967
Specification for Sitka spruce as
rough timber
ACE/12
BS 2PL 1:1966
Specification for phenolic
mouldings for aeronautical
purposes
ACE/12
BS 3SP 3:1943
Specification for aircraft material.
Fork joints (low tensile type) (for
sizes No. 4 B.A. to $9H inch B.S.F.
inclusive)
ACE/12
BRITISH STANDARDS
PROPOSED FOR
WITHDRAWALBS 2463:-
Transfusion equipment for medical
use.
BS 2463-1:1990
Specification for collapsible
containers for blood and blood
components
CH/212
BS 2463-2:1989
Specification for administration
sets
CH/212
BS 3680:-
Methods of measurement of liquid
flow in open channels
BS 3680-4C:1981
Weirs and flumes. Flumes
CPI/113
BS 6879:1999
Code for the representation of
names of counties and similar
areas
IDT/2/11
BRITISH STANDARDS
WITHDRAWNBS 873:-
Road traffic signs and internally
illuminated bollards
Page 28 of 81BRITISH STANDARDS WITHDRAWN
BS 873-1:1983
Methods of test
B/509
BS 873-2:1984
Specification for miscellaneous
signs
B/509
BS 873-4:1987
Specification for road studs
B/509
BS 873-7:1984
Specification for posts and fittings
B/509
BS 3273:1960
Specification for distant indicating
thermometers for ships'
refrigerated cargo spaces
SME/32
BS 4263:1967
Specification for the marking of
hatchway beams
SME/32
BS 4730:1993
Specification for UK 7-bit coded
character set
ICT/-/1
BS 4783:-
Storage, transportation and
maintenance of media for use in
data processing and information
storage
BS 4783-5:1991
Recommendations for 12.7 mm
magnetic tape cartridges for data
interchange, recording at 1491
data bytes per millimetre on 18
tracks
ICT/-/1
BS 4783-6:1993
Recommendations for optical disk
cartridges (ODC)
ICT/-/1
BS 4783-7:1993
Recommendations for optical data
disks (CD-ROM)
ICT/-/1
BS 4808:-
Specification for L.F. cables and
wires with PVC insulation and PVC
sheath for telecommunication
BS 4808-3:1972
Cables and equipment wires, with
solid or stranded conductors,
screened, single
EPL/46
BS 4808-4:1974
Equipment wires with solid or
stranded conductors, unscreened,
in pairs, triples, quads and
quintuples
EPL/46
BS 4808-5:1973
Cables with solid or stranded
conductors, screened and
sheathed, one pair
EPL/46
BS 5406:-
Disturbances in supply systems
caused by household appliances
and similar electrical equipment
BS 5406-1:1988
Glossary of terms
GEL/210/8
BS 5406-2:1988
Specification of harmonics
GEL/110
BS 5406-3:1988
Specification of voltage fluctuations
GEL/210/8
BS 5724:-
Medical electrical equipment
BS 5724-2.202:-
Particular requirements for safety.
Specification for critical care lung
ventilators
BS 5793:-
Industrial-process control valves
BS 5793-4:1987
Specification for inspection and
routine testing
GEL/65/2
BS 5929:-
Methods for sensory analysis of
food
BS 5929-6:1989
Ranking
AW/12
BS 6101:-
Machine tool ball screws
BS 6101-3:1992
Glossary of terms
MTE/1
BS 6101-4:1987
Method of calculation of static axial
rigidity
MTE/1
BS 6111:1981
Specification for reference coupler
for the measurement of hearing
aids using earphones coupled to
the ear by means of ear inserts
EPL/29
Page 29 of 81BRITISH STANDARDS WITHDRAWN
BS 7009:1988
Guide to application of real-time
radiography to weld inspection
WEE/46
BS 7164:-
Chemical tests for raw and
vulcanized rubber
BS 7164-4:1990
Methods for dissolution of rubber
by acid digestion
PRI/23
BS 7164-5:1991
Methods for determination of ash
content
PRI/23
BS 7208:-
Contact lenses
BS 7208-19:-
Contact lens care products
BS 7208-24:-
Single-vision hydrogel contact
lenses
BS 7824:-
Non-cellulosic papers for electrical
purposes
BS 7824-3.3:1995
Specifications for individual
materials. Unfilled aramid
(aromatic polyamide) papers
GEL/15
BS 7892:2000
Specification for seal coats on
cement mortar lined ductile iron
pipes and fittings
PSE/10
BS 9612 N007:1977
Detail specification for cold welded
seal quartz crystal units for
oscillator applications. DN, DQ and
DP enclosures, 17 to 75 MHz
frequency range. Third overtone
thickness-shear mode, AT-cut, for
operation over narrow temperature
ranges (temperature controlled).
Full assessment level
EPL/49
DD 254:2001
Crime reduction measures for
holiday resorts and
accommodation. Guidance and
recommendations
W/-
BS EN 563:1994
Safety of machinery. Temperatures
of touchable surfaces. Ergonomics
data to establish temperature limit
values for hot surfaces
PH/9/1
BS EN 794:-
Lung ventilators
BS EN 794-1:1997
(BS 5724-2.202:1997)
Particular requirements for critical
care ventilators
CH/121/3
BS EN 971:-
Paints and varnishes. Terms and
definitions for coating materials
BS EN 971-1:1996
General terms
STI/11
BS EN ISO 8320:-
Contact lenses and contact lens
care products. Vocabulary
BS EN ISO 8320-1:2003
Contact lenses
CH/172
BS EN ISO 8320-2:2001
(BS 7208-19:2001)
Contact lens care products
CH/172/9
BS EN ISO 8321:-
Optics and optical instruments.
Contact lenses
BS EN ISO 8321-1:2002
Rigid corneal and scleral contact
lenses
CH/172
BS EN ISO 8321-2:2000
(BS 7208-24:2000)
Single-vision hydrogel contact
lenses
CH/172/9
BS EN ISO 11539:1999
Ophthalmic optics. Contact lenses.
Classification and contact lens
materials
CH/172/9
DD ENV 12017:1998
Medical informatics. Medical
informatics vocabulary (MIVoc)
IST/35
BS EN 12523:1999
External limb prostheses and
external orthoses. Requirements
and test methods
CH/168
Page 30 of 81BRITISH STANDARDS WITHDRAWN
BS EN 13202:2000
Ergonomics of the thermal
environment. Temperatures of
touchable hot surfaces. Guidance
for establishing surface
temperature limit values in product
standards with the aid of EN 563
PH/9/1
BS EN 13221:2000
High-pressure flexible connections
for use with medical gases
CH/121/1
BS EN 60034:-
Rotating electrical machines
BS EN 60034-14:1998
Mechanical vibration of certain
machines with shaft heights 56 mm
and higher. Measurement,
evaluation and limits of vibration
PEL/2
BS EN 60249:-
Base materials for printed circuits
BS EN 60249-2:-
Specifications
BS EN 60249-2-2:1994
Phenolic cellulose paper
copper-clad laminated sheet,
economic quality
EPL/501
BS EN 60249-2-6:1994
Phenolic cellulose paper
copper-clad laminated sheet of
defined flammability (horizontal
burning test)
EPL/501
BS EN 60249-2-14:1994
Phenolic cellulose paper
copper-clad laminated sheet of
defined flammability (vertical
burning test), economic quality
EPL/501
BS EN 60704:-
Test code for the determination of
airborne acoustical noise emitted
by household and similar electrical
appliances
BS EN 60704-2-6:1995
Particular requirements
CPL/59
BS EN 60920:1991
Ballasts for tubular fluorescent
lamps. General and safety
requirements
CPL/34/3
BS EN 60922:1997
Auxiliaries for lamps. Ballasts for
discharge lamps (excluding tubular
fluorescent lamps). General and
safety requirements
CPL/34/3
BS EN 60924:1991
Specification for general and safety
requirements for D.C. supplied
electronic ballasts for tubular
fluorescent lamps
CPL/34/3
BS EN 60926:1996
Specification for auxiliaries for
lamps. Starting devices (other than
glow starters). General and safety
requirements
CPL/34/3
BS EN 60928:1995
Auxiliaries for lamps. A.C. supplied
electronic ballasts for tubular
fluorescent lamps. General and
safety requirements
CPL/34/3
BS EN 61046:1995
Specification for D.C. or A.C.
supplied electronic step-down
convertors for filament lamps.
General and safety requirements
CPL/34/3
BS EN 61860:2001
Dimension of low-profile cores
made of magnetic oxides
EPL/51
BS EN 131200:2002
Harmonized system of quality
assessment for electronic
components. Sectional
specification. Fixed capacitors with
metallized electrodes and
polypropylene dielectric
EPL/40X
BS ISO/IEC 9796:1991
Information technology. Security
techniques. Digital signature
scheme giving message recovery
IST/33
BS ISO 11243:1994
Cycles. Luggage carriers for
bicycles. Concepts, classification
and testing
GME/25
BS ISO 15319:1999
Recycled pulps. Estimation of
visible contraries by instrumental
means using reflected light
PAI/11
PD 6532:-
Reference materials
Page 31 of 81BRITISH STANDARDS WITHDRAWN
PD 6532-4:1992
Guide to the contents of certificates
of reference materials. Guide to
general and statistical principles for
the certification of reference
materials
SS/6
BS 6G 205:-
Specification for lead-acid batteries
BS 6G 205-1:1995
Secondary batteries for aircraft
ACE/6
BS MA 6:1970
Specification for internal doors and
frames
SME/32
BS MA 7:1983
Specification for manholes with
bolted covers
SME/32
BS MA 9:1970
Flanges, bolting and gaskets for
exhaust gas, piping for diesel
engines and boiler uptakes
SME/32
BS MA 10:1971
Specification for oval eyeplates
SME/32
BS MA 11:1971
Specification for horncleats
SME/32
BS MA 12:-
Specification for welded steel
bollards
BS MA 12-1:1983
Vertical type
SME/32
BS MA 12-2:1983
Cruciform type
SME/32
BS MA 13:1972
Recommendations for the
co-ordination of dimensions in
shipbuilding: glossary of terms
SME/32
BS MA 14:1972
Recommendations for the
co-ordination of dimensions in
shipbuilding: co-ordinating sizes for
components and assemblies
SME/32
BS MA 17:1972
Specification for derrick boom
clamp
SME/32
BS MA 19:1973
Specification for Panama-type
fairleads
SME/32
BS MA 20:1973
Specification for presentation of
ships' cargo gear particulars
SME/32
BS MA 21:1973
Specification for deck-end roller
fairleads
SME/32
BS MA 22:1973
Specification for cast roller
fairleads
SME/32
BS MA 23:1973
Specification for multi-angle roller
fairleads
SME/32
BS MA 26:1973
Specification for suction strainers
SME/32
BS MA 27:1974
Specification for sight-flow
indicators for tank overflow
systems
SME/32
BS MA 30:1973
Glossary of terms and graphical
symbols for ships' deck machinery
SME/32
BS MA 31:1973
Specification for ships' deck
machinery - cargo winches
SME/32
BS MA 33:1973
Specification for ships' deck
machinery - warping winches
SME/32
BS MA 34:1973
Specification for ships' deck
machinery - capstans
SME/32
BS MA 35:1975
Specification for ships' deck
machinery - windlasses
SME/32
BS MA 36:1974
Specification for ships' deck
machinery - topping winches
SME/32
BS MA 37:1973
Specification for external doors
(wood) for ships
SME/32
BS MA 39:-
Specification for ships' ladders
Page 32 of 81BRITISH STANDARDS WITHDRAWN
BS MA 39-1:1973
Ladders, steel vertical
SME/32
BS MA 39-2:1973
Ladders, steel sloping
SME/32
BS MA 39-3:1973
Ladders, steel dog-step
SME/32
BS MA 40:-
Specification for marine guardrails,
stanchions, etc
BS MA 40-1:1975
Guardrails for merchant ships
(excluding passenger ships)
SME/32
BS MA 40-2:1975
Gates and portable guardrail
sections for merchant ships
(excluding passenger ships)
SME/32
BS MA 40-3:1975
Storm rails (exterior)
SME/32
BS MA 42:1975
Specification for ships' awnings
and supports
SME/32
BS MA 44:1974
Recommendations for the
co-ordination of dimensions in
shipbuilding: principles of
dimensional co-ordination
SME/32
BS MA 45:1974
Recommendations for the
co-ordination of dimensions in
shipbuilding: controlling
dimensions
SME/32
BS MA 46:1973
Specification for cast iron
mudboxes
SME/32
BS MA 49:1986
Summary and application of
carbon steel tubes for marine
pipework systems
SME/32
BS MA 52:1974
Specification for ships' deck
machinery - accommodation ladder
winches
SME/32
BS MA 53:1975
Specification for ships' deck
machinery - towing winches for
deep sea use
SME/32
BS MA 55:1975
Specification for ships' deck
machinery - lifeboat winches
SME/32
BS MA 56:1974
Specification for ships' deck
machinery - anchor cable stoppers
SME/32
BS MA 59:1974
Specification for sea tubes
SME/32
BS MA 60:1986
Summary and application of
copper and copper alloy tubes for
ships' pipework systems
SME/32
BS MA 61:1974
Specification for bilge drain and
suction hats
SME/32
BS MA 62:1974
Specification for weed grids for sea
inlets
SME/32
BS MA 70:-
Specification for dimensions of
anchor chain cables
BS MA 70-1:1975
Stud-link anchor chain cables
SME/32
BS MA 71:1977
Recommendations for the
co-ordination of dimensions in
shipbuilding: co-ordinating spaces
for internal subdivision
SME/32
BS MA 72:1976
Recommendations for the
co-ordination of dimensions in
shipbuilding: co-ordinating spaces
for furniture
SME/32
BS MA 73:1976
Recommendations for the
co-ordination of dimensions in
shipbuilding: co-ordinating sizes for
fixtures, fittings and equipment
SME/32
BS MA 74:-
Tapers and other outboard details
of propeller shafts
Page 33 of 81BRITISH STANDARDS WITHDRAWN
BS MA 74-2:1981
Specification for shafts of diameter
greater than 160 mm up to 1000
mm
SME/32
BS MA 75:-
Specification for bulkhead pieces
and tank pads
BS MA 75-1:1985
Bulkhead pieces of fabricated steel
or copper alloy and steel pad
pieces
SME/32
BS MA 75-2:1978
Bulkhead pieces of ductile iron
(spheroidal graphite iron)
SME/32
BS MA 77:1976
Recommendations for the
co-ordination of dimensions in
shipbuilding: co-ordinating sizes for
services
SME/32
BS MA 79:1978
Specification for jib cranes: ship
mounted type
SME/32
BS MA 94:1981
Specification for thermal insulation
for marine piping systems
SME/32
BRITISH STANDARDS UNDER
REVIEWBS 2881:1989
Specification for cupboards for the
storage of medicines in health care
premises
CH/101
BS 4875:-
Strength and stability of furniture
BS 4875-5:2001
Requirements for strength,
durability and stability of tables and
trolleys for domestic and contract
use
FW/0
BS 7176:1995
Specification for resistance to
ignition of upholstered furniture for
non-domestic seating by testing
composites
FW/6
BS 7177:1996
Specification for resistance to
ignition of mattresses, divans and
bed bases
FW/6
BS 7320:1990
Specification for sharps containers
CH/101
BS EN 1232:1997
Workplace atmospheres. Pumps
for personal sampling of chemical
agents. Requirements and test
methods
EH/2
BS EN 13528:-
Ambient air quality. Diffusive
samplers for the determination of
concentrations of gases and
vapours. Requirements and test
methods
BS EN 13528-1:2002
General requirements
EH/2/3
BS EN 13528-2:2002
Specific requirements and test
methods
EH/2/3
BS EN ISO 14956:2002
Air quality. Evaluation of the
suitability of a measurement
procedure by comparison with a
required measurement uncertainty
EH/2/4
NEW WORK STARTED
BS 1251 (Revision)
Manufacture and installation of
fireplaces suitable for appliances
burning solid mineral fuel (including
wood) gas and electric
will supersede BS 1251:1987
RHE/28
BS 5930:1999/Amendment 1
Code of practice for site
investigations
B/526/1
BS 7454:1991/Amendment 1
Calculation of thermally
permissible short-circuit currents,
taking into account non-adiabatic
heating effects
GEL/20/16
BS 8206:-
Lighting for buildings
BS 8206-2 (Revision)
Code of practice for daylighting
will supersede BS 8206-2:1992
CPL/34/10
Page 34 of 81NEW WORK STARTED
BS 8496
Water quality. Enumeration of
micro-organisms in water samples.
Guidance on the estimation of
variation of results with particular
reference to the contribution of
uncertainty of measurement
will supersede DD 260:2003
EH/3/4
BS EN/TR 62271:-
High-voltage switchgear and
controlgear
BS EN ISO 1135:-
Transfusion equipment for medical
use
BS EN ISO
1135-4:2004/Corrigendum 1
Transfusion sets for single use
will supersede BS 2463-2:1989
CH/212
BS EN 2115
Aerospace series. Aluminium alloy
2117-T42. Wire for solid rivets.
D=10mm
ACE/61/-/24
BS EN 2116
Aerospace series. Aluminium alloy
2017A-T42. Wire for solid rivets.
D=10mm
ACE/61/-/24
BS EN 2117
Aerospace series. Aluminium alloy
5056A-H32. Wire for solid rivets.
D=10mm
ACE/61/-/24
BS EN ISO 2870 (Revision)
Surface active agents. Detergents.
Determination of anionic-active
matter hydrolyzable and
non-hydrolyzable under acid
conditions
will supersede BS EN ISO 2870:1994
CII/34
BS EN 3115
Aerospace series. Aluminium alloy
7050-T73. Wire for solid rivets.
D=10mm
ACE/61/-/24
BS EN 3373:-
Aerospace series. Terminal lugs
and in-line splices for crimping on
electric conductors
BS EN 3373-014
In-line splices, insulated and
sealed, for crimping on copper
conductors, temperature up to
200$0DC. Product standard
ACE/6/-/8
BS EN ISO 3826:-
Plastics collapsible containers for
human blood and blood
components
BS EN ISO
3826-1:2003/Corrigendum 2
Conventional containers
will supersede BS 2463-1:1990
CH/212
BS EN ISO 4254:-
Agricultural machinery. Safety
BS EN ISO 4254-1:2005/Amendment
1
General requirements
AGE/6
BS EN 4641:-
Aerospace series. Cables, optical
125$Gmm diameter cladding
BS EN 4641-100
Tight structure 62.5. 125$Gmm GI
fibre 1.8mm outside diameter.
Product standard
ACE/6/-/10
BS EN 4641-103
Semi-loose, ruggedized simplex
construction 62.5. 125$Gmm GI
fibre nominal 2.74mm outside
diameter. Product standard
ACE/6/-/10
BS EN ISO 7590 (Revision)
Steel cord conveyor belts. Methods
for the determination of total
thickness
will supersede BS EN ISO 7590:2001
PRI/67
BS EN ISO 8799 (Revision)
Surface active agents. Sulfated
ethoxylated alcohols and
alkylphenols. Determination of
content of unsulfated matter
will supersede BS EN ISO 8799:1996
CII/34
BS EN 10025:-
Hot rolled products of structural
steels
BS EN 10025-6:2004/Amendment 1
Technical delivery conditions for
flat products of high yield strength
structural steels in the quenched
and tempered condition
ISE/12
BS EN ISO 11737:-
Sterilization of medical
devices-Microbiological methods
Page 35 of 81NEW WORK STARTED
BS EN ISO 11737-2 (Revision)
Tests of sterility performed in the
validation of a sterilization process
will supersede BS EN ISO
11737-2:2000CH/198
BS EN ISO 13666 (Revision)
Ophthalmic optics. Spectacle
lenses. Vocabulary
will supersede BS EN ISO 13666:1999
CH/172/3
BS EN ISO 14160 (Revision)
Sterilization of single-use medical
devices incorporating materials of
animal origin. Validation and
routine control of sterilization by
liquid chemical sterilants
will supersede BS EN 14160:2002
CH/198
BS EN 14476:2005/Amendment 1
Chemical disinfectants and
antiseptics. Virucidal quantitative
suspension test for chemical
disinfectants and antiseptics used
in human medicine. Test method
and requirements (phase 2, step 1)
CH/216
BS EN 14879:-
Organic coating systems and
linings for protection of industrial
apparatus and plants against
corrosion caused by aggressive
media
BS EN 14879-4
Linings on metallic components
ISE/16
BS EN 14879-5
Linings on concrete components
ISE/16
BS EN ISO 14890 (Revision)
Conveyor belts. Specification for
rubber or plastics covered
conveyor belts of textile
construction for general use
will supersede BS EN ISO 14890:2003
PRI/67
BS EN ISO 14937 (Revision)
Sterilization of healthcare
products-General requirements for
characterization of a sterilizing
agent and the development,
validation and routine control of a
sterilization process for medical
devices
will supersede BS EN ISO 14937:2001
CH/198
BS EN ISO 21269 (Revision)
Hexagon socket head cap screws
with metric fine pitch thread
will supersede BS EN ISO 21269:2004
FME/9
BS EN ISO 21415:-
Wheat and wheat flour. Gluten
content
BS EN ISO 21415-2
Determination of wet gluten by
mechanical means
AW/4
BS EN ISO 28300
Petroleum, petrochemical and
natural gas industries. Venting of
atmospheric and low-pressure
storage tanks
PSE/17/-/6
BS EN 60601:-
Medical electrical equipment
BS EN 60601-2-58
Particular requirements for basic
safety and essential performance
of lens removal and vitrectomy
devices for ophthalmic surgery
CH/62/4
BS EN/TR 60825:-
Safety of laser products
BS EN/TR 60825-15
Guidance on manufacturing
requirements relating to non-laser
optical radiation safety
EPL/76
BS EN 60947:-
Low-voltage switchgear and
controlgear
BS EN 60947-5-1:2004/Amendment
2
Control circuit devices and
switching elements.
Electromechanical control circuit
devices
PEL/17/2
BS EN 61754:-
Fibre optic connector interfaces
BS EN 61754-20 (Revision)
Type LC connector family
will supersede BS EN 61754-20:2002
GEL/86/2
BS EN 62227
Multimedia home server systems.
Digital rights permission code
EPL/100
BS EN 62271:-
High-voltage switchgear and
controlgear
Page 36 of 81NEW WORK STARTED
BS EN 62271-101:2006/Amendment
1
Synthetic testing. Inclusion of IEC
61633
PEL/17/1
BS EN/TR 62271-303
Use and handling of sulphur
hexafluoride (SF6)
PEL/17/1
BS EN 62501
Testing of voltage source converter
(VSC) valves for high-voltage
direct current (HVDC) systems
PEL/22
BS EN 140101 (Revision)
Blank detail specification. Fixed
low power film resistors
will supersede BS EN 140101:1997
EPL/40X
BS EN 002560160
Railway applications. Braking.
Static brake testing
RAE/4
DD IEC/PAS 62500
Process management for avionics.
Guide for defining and performing
highly accelerated tests in avionic
systems (IEC/PAS)
GEL/107
BS ISO 927
Spices and condiments.
Determination of extraneous matter
and foreign matter content
will supersede BS 4585-1:1983
AW/7
BS ISO 1833:-
Quantitative chemical analysis
BS ISO 1833-22
Mixtures of viscose or certain types
of cupro or modal or lyocell and
cotton fibres (method using formic
acid and zinc chlorate)
TCI/80
BS ISO 1833-24
Mixtures of polyester and some
other fibres (method using phenol
and tetrachloroethane)
TCI/80
BS ISO 4126:-
Safety devices for protection
against excessive pressure
BS ISO 4126-7
Common data
PVE/12
BS ISO 5247:-
Textile machinery and accessories.
Weaving machines
BS ISO 5247-1
Vocabulary and classification
TCI/33
DD ISO/TS 6733
Milk and milk products.
Determination of lead content.
Graphite furnace atomic absorption
spectrometric method
AW/5
BS ISO 7641:-
Road vehicles. Trailers up to 3,5 t.
Calculation of the mechanical
strength of the drawbar
BS ISO 7641-1
Steel drawbars
AUE/8
BS ISO XXXX
Jointing products. Sealants. Test
method to determine stringiness of
sealants
B/547
BS ISO 11452:-
Road vehicles. Component test
methods for electrical disturbances
from narrowband radiated
electromagnetic energy
BS ISO 11452-10
Conducted immunity in the
extended audio frequency range
AUE/16
BS ISO 13347:-
Industrial fans. Determination of
fan sound power levels under
standardized laboratory conditions
BS ISO 13347-3:2004/Corrigendum 1
Enveloping surface methods
MCE/17
BS ISO 13628:-
Petroleum and natural gas
industries. Drilling and production
equipment
BS ISO 13628-12
Dynamic production risers
PSE/17/-/4
BS ISO 16312:-
Guidance for assessing the validity
of physical fire models for obtaining
fire effluent toxicity data for fire
hazard and risk
BS ISO 16312-1
Criteria
FSH/16
Page 37 of 81NEW WORK STARTED
BS ISO 21258
Stationary source emissions.
Determination of the mass
concentration of dinitrogen
monoxide (N$d2O). Reference
method. Non-dispersive infrared
method
EH/2/1
BS ISO 22369:-
Crop protection equipment. Drift
classification of spraying
equipment
BS ISO 22369-2
Classification of field crop sprayers
by field measurement
AGE/15
BS ISO/IEC 23001:-
Information technology. MPEG
systems technologies
BS ISO/IEC 23001-3
Binary to XML mapping for IPMP-X
IST/37
BS ISO/IEC 24753
Information technology. Radio
frequency identification (RFID) for
item management. Application
protocol. encoding and processing
rules for sensors and batteries
IST/34
BS ISO/IEC 24991:-
Information technology. Radio
frequency identification (RFID) for
item management. Software
system infrastructure
BS ISO/IEC 24991-1
Architecture
IST/34
BS ISO 25498
Method of selected area electron
diffraction for transmission electron
microscopes
CII/9
BS ISO 26782
Anaesthetic and respiratory
equipment. Spirometers intended
for the assessment of pulmonary
function in humans
CH/121/3
BS ISO 26870
Space systems. Launch pad and
integration site operational
documents
ACE/68/-/3
BS ISO 26872
Space systems. Disposal of
satellites operating at
geosynchronous altitude
ACE/68/-/3
DD ISO/TS 28479
Crop protection equipment.
Substitute materials for testing
AGE/15
BS ISO 28641
Rubber compounding ingredients.
Organic chemicals. General test
methods
CH/205/3
BS ISO 28680
Application of risk management for
IT. Networks incorporating medical
devices
IST/35
BS ISO/IEC 80001
Application of risk management to
information technology (IT)
networks incorporating medical
devices
CH/62/1
PD ISO/TR 23462
Space systems. Guidelines to
define the management framework
for a space project
ACE/68/-/5
PD ISO/IEC/TR 24498
Paper, board and pulps. Estimation
of uncertainty for test methods
PAI/11
PD ISO/TR 27809
Health informatics. Measures for
ensuring patient safety of health
software
IST/35
DRAFT BRITISH STANDARDS
FOR PUBLIC COMMENT06/19980655 DC
BS EN ISO 6360-5 Dentistry.
Number coding system for rotary
instruments. Part 5. Specific
characteristics of root-canal
instruments
CH/106/4
06/30084693 DC
BS ISO 15392 Sustainability in
building construction. General
principles
B/558
06/30085136 DC
EN ISO 9809-1 Gas cylinders.
Refillable seamless steel gas
cylinders. Design construction and
testing. Part 1. Quenched and
tempered steel cylinders with
tensile strength less than 1100
MPa
PVE/3/3
Page 38 of 81DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30085139 DC
EN ISO 9809-2 Gas cylinders.
Refillable seamless steel gas
cylinders. Design construction and
testing. Part 2. Quenched and
tempered steel cylinders with
tensile strength greater than or
equal to 1100 MPa
PVE/3/3
06/30085142 DC
EN ISO 9809-3 Gas cylinders.
Refillable seamless steel gas
cylinders. Design construction and
testing. Part 3. Normalized steel
cylinders
PVE/3/3
06/30110083 DC
ISO 20332-1 Cranes. Proof of
competence of steel structures.
Part 1. General
MHE/3
06/30112308 DC
EN ISO 13530 Water quality.
Guidance on analytical quality
control for chemical and
physicochemical water analysis
EH/3/2
06/30116855 DC
BS ISO 10524-4 Pressure
regulators for use with medical
gases. Part 4. Low-pressure
regulators intended for
incorporation into medical
equipment
CH/121/6
06/30117323 DC
ISO 20632 Room test for pipe
insulation
FSH/21
06/30124428 DC
EN 13598-2 Plastics piping
systems for non-pressure
underground drainage and
sewerage. Unplasticized poly (vinyl
chloride)(PVC-U), polypropylene
(PP) and polyethylene (PE). Part 2.
Specifications for manholes and
inspection chambers in traffic
areas and deep underground
installations
PRI/88/1/P1
06/30125744 DC
EN 13081 Tanks for transport of
dangerous goods. Service
equipment for tanks. Vapour
collection adaptor and coupler
AUE/18
06/30125798 DC
EN 13082 Tanks for transport of
dangerous goods. Service
equipment for tanks. Vapour
transfer valve
AUE/18
06/30133250 DC
BS EN 13071-1 Stationary waste
containers up to 5 000 l, top lifted
bottom emptied. Part 1. General
requirements
B/508/1
06/30133254 DC
BS EN 13071-2 Stationary waste
containers up to 5 000 l, top lifted
bottom emptied. Part 2. Additional
requirements for underground or
partly underground systems
B/508/1
06/30133468 DC
ISO 18213-3 Nuclear fuel
technology. Tank calibration and
volume determination for nuclear
materials accountancy. Part 3.
Statistical methods
NCE/9
06/30134242 DC
ISO 22900-1 Road vehicles.
Modular vehicle communication
interface (MVCI). Part 1. Hardware
design requirements
AUE/16
06/30134245 DC
ISO 22900-2 Road vehicles.
Modular vehicle communication
interface (MVCI). Part 2.
Diagnostic protocol data unit
application programmer interface
(D-PDU API)
£33.00 members, £66.00
non-members
AUE/16
06/30136187 DC
EN 755-1 Aluminium and
aluminium alloys. Extruded rod/bar,
tube and profiles. Part 1. Technical
conditions for inspection and
delivery
NFE/35
06/30136208 DC
EN 755-2 Aluminium and
aluminium alloys. Extruded rod/bar,
tube and profiles. Part 2.
Mechanical properties
NFE/35
06/30136211 DC
EN 755-3 Aluminium and
aluminium alloys. Extruded rod/bar,
tube and profiles. Part 3. Round
bars, tolerances on dimensions
and form
NFE/35
06/30136216 DC
EN 755-4 Aluminium and
aluminium alloys. Extruded rod/bar,
tube and profiles. Part 4. Square
bars, tolerances on dimensions
and form
NFE/35
Page 39 of 81DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30136223 DC
EN 755-5 Aluminium and
aluminium alloys. Extruded rod/bar,
tube and profiles. Part 5.
Rectangular bars, tolerances on
dimensions and form
NFE/35
06/30136227 DC
EN 755-6 Aluminium and
aluminium alloys. Extruded rod/bar,
tube and profiles. Part 6.
Hexagonal bars, tolerances on
dimensions and form
NFE/35
06/30136230 DC
EN 755-7 Aluminium and
aluminium alloys. Extruded rod/bar,
tube and profiles. Part 7. Seamless
tubes, tolerances on dimensions
and form
NFE/35
06/30136233 DC
EN 755-8 Aluminium and
aluminium alloys. Extruded rod/bar,
tube and profiles. Part 8. Porthole
tubes, tolerances on dimensions
and form
NFE/35
06/30136236 DC
EN 755-9 Aluminium and
aluminium alloys. Extruded rod/bar,
tube and profiles. Part 9. Profiles,
tolerances on dimensions and form
NFE/35
06/30136240 DC
EN 12020-1 Aluminium and
aluminium alloys. Extruded
precision profiles in alloys EN
AW-6060 and EN AW-6063. Part
1. Technical conditions for
inspection and delivery
NFE/35
06/30136243 DC
EN 12020-2 Aluminium and
aluminium alloys. Extruded
precision profiles in alloys EN
AW-6060 and EN AW-6063. Part
2. Tolerances on dimensions and
form
NFE/35
06/30136455 DC
ISO 7302 Cereals and cereal
products. Determination of total fat
content
AW/4
06/30136505 DC
EN 754-1 Aluminium and
aluminium alloys. Cold drawn
rod/bar and tube. Part 1. Technical
conditions for inspection and
delivery
NFE/35
06/30136517 DC
EN 754-2 Aluminium and
aluminium alloys. Cold drawn
rod/bar and tube. Part 2.
Mechanical properties
NFE/35
06/30136521 DC
EN 754-3 Aluminium and
aluminium alloys. Cold drawn
rod/bar and tube. Part 3. Round
bars, tolerances on dimensions
and form
NFE/35
06/30136525 DC
EN 754-4 Aluminium and
aluminium alloys. Cold drawn
rod/bar and tube. Part 4. Square
bars, tolerances on dimensions
and form
NFE/35
06/30136531 DC
EN 754-5 Aluminium and
aluminium alloys. Cold drawn
rod/bar and tube. Part 5.
Rectangular bars, tolerances on
dimensions and form
NFE/35
06/30136535 DC
EN 754-6 Aluminium and
aluminium alloys. Cold drawn
rod/bar and tube. Part 6.
Hexagonal bars, tolerances on
dimensions and form
NFE/35
06/30136539 DC
EN 754-7 Aluminium and
aluminium alloys. Cold drawn
rod/bar and tube. Part 7. Seamless
tubes, tolerances on dimensions
and form
NFE/35
06/30136542 DC
EN 754-8 Aluminium and
aluminium alloys. Cold drawn
rod/bar and tube. Part 8. Porthole
tubes, tolerances on dimensions
and form
NFE/35
06/30137205 DC
ISO 23999 Resilient floor
coverings. Determination of
dimensional stability and curling
after exposure to heat
PRI/60
06/30137671 DC
ISO 9012 Gas welding equipment.
Air-aspirated hand blowpipes.
Specifications and tests
WEE/18
Page 40 of 81DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30138176 DC
EN ISO 13736 Determination of
flash point. Abel closed cup
method
PTI/13
06/30141148 DC
ISO 10426-6 Petroleum and
natural gas industries. Cements
and materials for well cementing.
Part 6. Methods for determining the
static gel strength of cement
formulations
PSE/17/-/3
06/30143379 DC
ISO 12647-7 Graphic technology.
Process control for the production
of half-tone colour separations,
proof and production prints. Part 7.
Off-press proofing process working
directly from digital data
PAI/43
06/30143616 DC
BS EN 62428 Electric power
engineering. Modal components in
three-phase A.C. systems.
Quantities and transformations
SS/7
06/30143946 DC
EN 485-1 Aluminium and
aluminium alloys. Sheet, strip and
plate. Part 1. Technical conditions
for inspection and delivery
NFE/35
06/30145480 DC
BS ISO 3907 Hardmetals.
Determination of total carbon
content. Gravimetric method
ISE/65/4
06/30145483 DC
ISO 3908 Hardmetals.
Determination of insoluble (free)
carbon content. Gravimetric
method
ISE/65/4
06/30146327 DC
EN ISO 16000-12 Indoor air. Part
12. Sampling strategy for polycyclic
aromatic hydrocarbons (PAHs),
polychlorinated dibenzo-p-dioxins
(PCDDs), polychlorinated
dibenzo-furans (PCDFs) and
polychlorinated biphenyls (PCBs)
EH/2/3
06/30146336 DC
EN ISO 16000-15 Indoor air. Part
15. Sampling strategy for nitrogen
dioxide (NO$d2)
EH/2/3
06/30147973 DC
ISO 4309 AMD1 Cranes. Wire
ropes. Care, maintenance,
installation, examination and
discard
MHE/3/1
06/30148323 DC
ISO 24538 Plastics. Homopolymer
and copolymer resins of vinyl
chloride. Determination of residual
vinyl chloride monomer.
Gas-chromatographic method on
dry powder
PRI/21
06/30150544 DC
ISO 1952 Solid mineral fuels.
Determination of extractable
metals in dilute hydrochloric acid
PTI/16
06/30151576 DC
BS EN 1186-13 Materials and
articles in contact with foodstuffs.
Plastics. Part 13. Test methods for
overall migration at high
temperatures
CW/47/1
06/30151581 DC
BS EN 1186-14 Materials and
articles in contact with foodstuffs.
Plastics. Part 14. Test methods for
'substitute tests' for overall
migration from plastics intended to
come into contact with fatty
foodstuffs using test media
iso-octane and 95% ethanol
CW/47/1
06/30151585 DC
BS EN 1186-15 Materials and
articles in contact with foodstuffs.
Plastics. Part 15. Alternative test
methods to migration into fatty food
simulants by rapid extraction into
iso-octane and/or 95% ethanol
CW/47/1
06/30151589 DC
BS EN 13130-13 Materials and
articles in contact with foodstuffs.
Plastics substances subject to
limitation. Part 13. Determination of
2,2-bis (4-hydroxyphenyl) propane
(bisphenol A) in food simulants
CW/47/1
06/30151741 DC
BS EN 61937-1 Digital audio.
Interface for non-linear PCM
encoded audio bitstreams applying
IEC 60958. Part 1. General
EPL/100
Page 41 of 81DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30152283 DC
BS IEC 60684-3-205 Flexible
insulating sleeving. Part 3.
Specifications for individual types
of sleeving. Sheet 205.
Heat-shrinkable polychloroprene
sleeving, flame retarded, shrink
ratio 1,7:1
GEL/15/3/5
06/30152609 DC
BS 8491 Method for assessment of
fire integrity of large diameter
power cables for use as
components for smoke and heat
control systems and certain other
active fire safety systems
GEL/20/18
06/30155192 DC
BS 7883 AMD 1 Code of practice
for the design, selection,
installation, use and maintenance
of anchor devices conforming to
BS EN 795
PH/5
06/30155603 DC
BS 7671 Requirements for
electrical installations. IEE wiring
regulations. Seventeenth edition
JPEL/64
06/30156559 DC
BS EN 15567-2 Sports and
recreational facilities. Ropes
courses. Part 2. Operation
requirements
SW/136
06/30156763 DC
BS ISO 13967 Thermoplastics
fittings. Determination of ring
stiffness
PRI/88/4
06/30156785 DC
BS EN ISO 25619-1
Geosynthetics. Determination of
compression behaviour. Part 1.
Compressive creep properties
B/553
06/30156792 DC
BS EN ISO 25619-2
Geosynthetics. Determination of
compression behaviour. Part 2.
Determination of short-term
compression behaviour
B/553
06/30156990 DC
BS EN 60038 IEC standard
voltages
GEL/8
06/30156995 DC
BS EN 60059/prA1 IEC standard
current ratings
GEL/8
06/30156997 DC
BS EN 61290-10-2 Optical
amplifiers. Test methods. Part
10-2. Multichannel parameters.
Pulse method using a gated optical
spectrum analyzer
GEL/86/3
06/30157004 DC
BS EN 60196 IEC standard
frequencies
GEL/8
06/30157008 DC
BS EN 60092-201 Electrical
installations in ships. System
design. General. Shore
connections
GEL/20/6
06/30157050 DC
BS EN 60947-7-1/prA1
Low-voltage switchgear and
controlgear. Part 7-1. Ancillary
equipment. Terminal blocks for
copper conductors
PEL/17/2
06/30157054 DC
BS EN 60947-7-2/prA1
Low-voltage switchgear and
controlgear. Part 7-2. Ancillary
equipment. Protective conductor
terminal blocks for copper
conductors
PEL/17/2
06/30157058 DC
BS EN 60947-7-3/prA1
Low-voltage switchgear and
controlgear. Part 7-3. Ancillary
equipment. Safety requirements for
fuse terminal blocks
PEL/17/2
06/30157062 DC
BS EN 62310-3 Static transfer
systems (STS). Part 3. Method of
specifying the performance and
test requirements
PEL/22
06/30157075 DC
BS EN 50499 Determination of
workers exposure to
electromagnetic fields
GEL/106
06/30157092 DC
ISO/DIS 21789 Gas turbine
applications. Safety
MCE/16/-/1
Page 42 of 81DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30157118 DC
BS ISO 23145-1 Fine ceramics
(advanced ceramics, advanced
technical ceramics). Determination
of bulk density of ceramic powders.
Tap density
RPI/13
06/30157122 DC
BS ISO 4226 Air quality. General
aspects. Units of measurement
EH/2/4
06/30157128 DC
BS IEC 62490 Low ESL measuring
method on capacitors with lead
terminal for use in electrical and
electronic equipment
EPL/40X
06/30157139 DC
BS EN 50498 Electromagnetic
compatibility (EMC). Product family
standard for aftermarket electronic
equipment in vehicles
GEL/210/11
06/30157189 DC
BS ISO/IEC 7816-2 Identification
cards. Integrated circuit cards. Part
2. Cards with contacts. Dimensions
and location of the contacts
IST/17
06/30157192 DC
BS EN 736-3 Valves. Terminology.
Part 3. Definition of terms
PSE/7/1
06/30157233 DC
BS ISO 18776 Laminated veneer
lumber (LVL). Definitions and
requirements
B/541
06/30157236 DC
BS EN 14017/prA1 Agricultural and
forestry machinery. Solid fertilizer
distributors. Safety
AGE/32
06/30157246 DC
BS ISO 12643-3 Graphic
technology. Safety requirements
for graphic technology equipment
and systems. Part 3. Binding and
finishing equipment
PAI/43
06/30157250 DC
BS ISO 4254-1 AMD 1 Agricultural
machinery. Safety. Part 1. General
requirements
AGE/6
06/30157257 DC
BS EN ISO 20565-1 Chemical
analysis of chrome-bearing
refractory products and
chrome-bearing raw materials
(alternative to the X-ray
fluorescence method). Part 1.
Apparatus, reagents, dissolution
and gravimetric silica
RPI/1
06/30157261 DC
BS EN ISO 20565-2 Chemical
analysis of chrome-bearing
refractory products and
chrome-bearing raw materials
(alternative to the X-ray
fluorescence method). Part 2. Wet
chemical analysis
RPI/1
06/30157265 DC
ISO 14557 AMD 1 Fire-fighting
hoses. Rubber and plastics suction
hoses and hose assemblies
PRI/66
06/30157269 DC
BS EN ISO 20565-3 Chemical
analysis of chrome-bearing
refractory products and
chrome-bearing raw materials
(alternative to the X-ray
fluorescence method). Part 3.
Flame atomic absorption
spectrometry (FAAS) and
inductively coupled plasma
emission spectrometry (ICP-AES)
RPI/1
06/30157273 DC
EN 15567-1 Sports and
recreational facilities. Ropes
courses. Part 1. Safety
requirements and test methods
SW/136
06/30157277 DC
EN ISO 14557/prA1 Fire-fighting
hoses. Rubber and plastics suction
hoses and hose assemblies
FSH/17/6
06/30157320 DC
BS EN 60335-2-6/prA2 Household
and similar electrical appliances.
Safety. Part 2-6. Particular
requirements for stationary cooking
ranges, hobs, ovens and similar
appliances
CPL/61/07
06/30157324 DC
BS EN 60335-2-23/prA1
Household and similar electrical
appliances. Safety. Part 2-23.
Particular requirements for
appliances for skin or hair care
CPL/61/01
Page 43 of 81DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30157328 DC
BS EN 60335-2-32/prA1
Household and similar electrical
appliances. Safety. Part 2-32.
Particular requirements for
massage appliances
CPL/61/01
06/30157333 DC
BS EN 60335-2-105/prA1
Household and similar electrical
appliances. Safety. Part 2-105.
Particular requirements for
multifunctional shower cabinets
CPL/61/07
06/30157367 DC
BS ISO 12637-4 Graphic
technology. Vocabulary. Part 4.
Postpress terms
PAI/43
06/30157457 DC
BS EN 4641-100 Aerospace
series. Cables, optical 125 $Gmm
diameter cladding. Part 100. Tight
structure 62.5-125 $Gmm GI fibre
1.8 mm outside diameter. Product
standard
ACE/6/-/10
06/30157460 DC
BS EN 4641-102 Aerospace
series. Cables, optical 125 $Gmm
diameter cladding. Part 102.
Semi-loose 62.5-125 $Gmm GI
fibre nominal 1.8 mm outside
diameter. Product standard
ACE/6/-/10
06/30157463 DC
BS EN 4641-103 Aerospace
series. Cables, optical 125 $Gmm
diameter cladding. Part 103.
Semi-loose 62.5-125 $Gmm GI
fibre nominal 1.8 mm outside
diameter. Product standard
ACE/6/-/10
06/30157466 DC
BS EN 4641-104 Aerospace
series. Cables, optical 125 $Gmm
diameter cladding. Part 104.
Semi-loose, ruggedized duplex
construction 62.5-125 $Gmm GI
fibre nominal 4.95 mm outside
diameter. Product standard
ACE/6/-/10
06/30157469 DC
BS EN 4641-105 Aerospace
series. Cables, optical 125 $Gmm
diameter cladding. Part 105.
Semi-loose, ruggedized quadraxial
construction 62.5-125 $Gmm GI
fibre nominal 5.72 mm outside
diameter. Product standard
ACE/6/-/10
06/30157507 DC
BS ISO 10431 Petroleum and
natural gas industries. Pumping
units. Specification
PSE/17/-/4
06/30157514 DC
BS ISO 11783-12 Tractors and
machinery for agriculture and
forestry. Serial control and
communications data network. Part
12. Diagnostics services
AGE/6
06/30157528 DC
BS EN ISO 10058-1 Chemical
analysis of magnesite and dolomite
refractory products (alternative to
the X-ray fluorescence method).
Part 1. Apparatus, reagents,
dissolution and gravimetric silica
RPI/1
06/30157532 DC
BS EN ISO 10058-2 Chemical
analysis of magnesite and dolomite
refractory products (alternative to
the X-ray fluorescence method).
Part 2. Wet chemical analysis
RPI/1
06/30157536 DC
BS EN ISO 10058-3 Chemical
analysis of magnesite and dolomite
refractory products (alternative to
the X-ray fluorescence method).
Part 3. Flame atomic absorption
spectrophotometry (FAAS) and
inductively coupled plasma
emission spectrometry (ICP-AES)
RPI/1
06/30157557 DC
BS ISO 28178 Graphic technology.
Exchange format for colour and
process control data using XML or
ASCII text
PAI/43
06/30157591 DC
BS ISO 1833-23 Textiles.
Quantitative chemical analysis.
Part 23. Mixtures of polyethylene
and polypropylene (method using
cyclohexanone)
TCI/80
06/30157605 DC
IEC TR 60825-15 Safety of laser
products. Part 15. Guidance on
manufacturing requirements
relating to non-laser optical
radiation safety
EPL/76
06/30157625 DC
BS EN 61039 General
classification of insulating liquids
GEL/10
Page 44 of 81DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30157640 DC
BS EN 60745-2-2/prA1 Hand-held
motor-operated electric tools.
Safety. Part 2-2. Particular
requirements for screwdrivers and
impact wrenches
CPL/61/6
06/30157651 DC
BS EN 60745-2-4/prA1 Hand-held
motor-operated electric tools.
Safety. Part 2-4. Particular
requirements for sanders and
polishers other than disk types
CPL/61/6
06/30157655 DC
BS EN 50289-4-4 Communication
cables. Specifications for test
methods. Part 4-4. Environmental
test methods. Resistance to
solvents and contaminating fluids
EPL/46
06/30157658 DC
BS EN 60745-2-6/prA2 Hand-held
motor-operated electric tools.
Safety. Part 2-6. Particular
requirements for hammers
CPL/61/6
06/30157662 DC
BS EN 50289-4-5 Communication
cables. Specifications for test
methods. Part 4-5. Environmental
test methods. Climatic sequence
EPL/46
06/30157665 DC
BS EN 60745-2-8/prA1 Hand-held
motor-operated electric tools.
Safety. Part 2-8. Particular
requirements for shears and
nibblers
CPL/61/6
06/30157669 DC
BS EN 50289-4-7 Communication
cables. Specifications for test
methods. Part 4-7. Environmental
test methods. Damp heat steady
state
EPL/46
06/30157673 DC
BS EN 60745-2-9/prA1 Hand-held
motor-operated electric tools.
Safety. Part 2-9. Particular
requirements for tappers
CPL/61/6
06/30157681 DC
BS EN 60745-2-11/prA1 Hand-held
motor-operated electric tools.
Safety. Part 2-11. Particular
requirements for reciprocating
saws (jig and sabre saws)
CPL/61/6
06/30157686 DC
BS EN 60745-2-12/prA1 Hand-held
motor-operated electric tools.
Safety. Part 2-12. Particular
requirements for concrete vibrators
CPL/61/6
06/30157690 DC
BS EN 60745-2-18/prA1 Hand-held
motor-operated electric tools.
Safety. Part 2-18. Particular
requirements for strapping tools
CPL/61/6
06/30157694 DC
BS EN 60745-2-20/prA1 Hand-held
motor-operated electric tools.
Safety. Part 2-20. Particular
requirements for band saws
CPL/61/6
06/30157698 DC
BS EN ISO 24333 Cereals and
cereal products. Sampling
AW/4
06/30157702 DC
BS EN 60745-2-21/prA1 Hand-held
motor-operated electric tools.
Safety. Part 2-21. Particular
requirements for drain cleaners
CPL/61/6
06/30157706 DC
BS EN 60745-2-1/prA1 Hand-held
motor-operated electric tools.
Safety. Part 2-1. Particular
requirements for drills and impact
drills
CPL/61/6
06/30157712 DC
prEN 2593-001 Aerospace series.
Bases for 10 A electromagnetic
plug-in relays, two and four poles
double throw. Part 001. Technical
specification
ACE/6/-/4
06/30157778 DC
BS ISO 8894-2 Refractory
materials. Determination of thermal
conductivity. Part 2. Hot-wire
method (parallel)
RPI/1
06/30157850 DC
BS EN 13083 Tanks for transport
of dangerous goods. Service
equipment for tanks. Adaptor for
bottom loading and unloading
AUE/18
06/30157853 DC
BS EN 10255/prA1 Non-alloy steel
tubes suitable for welding and
threading. Technical delivery
conditions
ISE/8
06/30157868 DC
BS EN 60393-1 Potentiometers for
use in electronic equipment. Part 1.
Generic specification
EPL/40X
Page 45 of 81DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30157873 DC
prEN 2593-003 Aerospace series.
Bases for 10 A electromagnetic
plug-in relays, two and four poles
double throw. Part 003. According
to EN 2548-003. Base with
non-captive fixation stud, metric.
Product standard
ACE/6/-/4
06/30157874 DC
prEN 2593-005 Aerospace series.
Bases for 10 A electromagnetic
plug-in relays, two and four poles
double throw. Part 005. According
to EN 2548-005. Base with
moulded-in fixation stud, metric.
Product standard
ACE/6/-/4
06/30157875 DC
prEN 2593-004 Aerospace series.
Bases for 10 A electromagnetic
plug-in relays, two and four poles
double throw. Part 004. Base with
moulded-in fixation stud, unified.
Product standard
ACE/6/-/4
06/30157884 DC
BS EN 12597 Bitumen and
bituminous binders. Terminology
B/510/19
06/30157890 DC
BS EN 50496 Determination of
workers' exposure to
electromagnetic fields and
assessment of risk at a broadcast
site
GEL/106
06/30158054 DC
BS 3621 AMD 1 Thief resistant
lock assembly. Key egress
B/538/4
06/30158068 DC
BS 8621 AMD 1 Thief resistant
lock assembly. Keyless egress
B/538/4
06/30158081 DC
BS EN ISO 105-E04 Textiles.
Tests for colour fastness. Part E04.
Colour fastness to perspiration
TCI/81
DOCUMENTS NOT ISSUED
AS DPCsBS EN 60601:-
Medical electrical equipment
BS EN 60601-1:-
General requirements for basic
safety and essential performance.
Collateral standard
BS EN 60601-1-2
Electromagnetic compatibility.
Requirements and tests
Copies of this text are available
from the Programme Manager
(below). When published it will
supersede BS EN 60601-1-2:2002.
Contact: Philippa Younas
Email:
[email protected]/62/1
BS EN 60601-1-6
Usability
Copies of the text to this standard,
which has been circulated to
CENELEC members as a final
committee draft by CENELEC/TC
62, are available from the
Programme Manager (below).
When published it will supersede
BS EN 60601-1-6:2004.
Contact: Philippa Younas
Email:
[email protected]/62/1
BS EN 60601-1-8
General requirements, tests and
guidance for alarm systems in
medical electrical equipment and
medical electrical systems
Copies of this text are available
from the Programme Manager
(below). When published it will
supersede BS EN 60601-1-8:2004.
Please note it will not be circulated
to CENELEC members as a final
committee draft as it received a
unanimous vote of approval at the
Enquiry stage.
Contact: Philippa Younas
Email:
[email protected]/62/1
BS EN 60601-1-8 AMD1
General requirements, tests and
guidance for alarm systems in
medical electrical equipment and
medical electrical systems
The ratified text for the amendment
of this European Standard has
been issued and is now due for
implementation. For further
information please contact the
Programme Manager (below).
Contact: Philippa Younas
Email:
[email protected]/62/1
prEN ISO 3093
Wheat, rye and respective flours,
durum wheat and durum wheat
semolina. Determination of the
falling number according to
Hagberg-Perten
Copies of this draft standard are
available from the contact point
(below).
Contact: Committee Service Centre
Email: [email protected]
AW/4
EN 62464:-
Magnetic resonance equipment for
medical imaging
Page 46 of 81DOCUMENTS NOT ISSUED AS DPCs
EN 62464-1
Determination of essential image
quality parameters
This standard has been circulated
to CENELEC members as a final
committee draft by CENELEC/TC
62. Copies of the text are available
from the Committee Secretary. It
was previously numbered 62312-1
and 61223-3-7.
Contact: Philippa Younas
Email:
[email protected]/62/2
ISO/DIS 5519
Fruits, vegetables and derived
products. Determination of sorbic
acid content
This Draft International Standard
has been issued for enquiry
following its preparation by ISO/TC
34/SC3, Fruit and vegetable
products. There is currently no
interest in this subject in the UK
and thus no corresponding mirror
committee to provide input into the
draft's development. Consequently,
the draft is not being issued as a
British Standard Draft for Public
Comment. Copies of the draft ISO
document are available on request
from the contact point (below).
Contact: Committee Service Centre
Email: [email protected]
AW/100
ISO/DIS 22855
Fruit and vegetable products.
Determination of benzoic acid and
sorbic acid contents.
High-performance liquid
chromatography method
This Draft International Standard
has been issued for enquiry
following its preparation by ISO/TC
34/SC3, Fruit and vegetable
products. There is currently no
interest in this subject in the UK
and thus no corresponding mirror
committee to provide input into the
draft's development. Consequently,
the draft is not being issued as a
British Standard Draft for Public
Comment. Copies of the draft ISO
document are available on request
from the contact point (below).
Contact: Committee Service Centre
Email: [email protected]
AW/100
ISO/DIS 24373
Welding consumables. Solid wires
and rods for fusion welding of
copper and copper alloys.
Classification
Copies of this document, which is
based on BS EN 14649:2005, are
available from the Programme
Manager (below).
Contact: Anne Hannan
Email: [email protected]
WEE/39
CEN/CENELEC UNIQUE
ACCEPTANCE PROCEDUREprEN 60745:-
Hand-held motor-operated electric
tools. Safety
prEN 60745-2-21:2006
Particular requirements for drain
cleaners
IEC 60745-2-21 was published in
2002 but was not issued as a Draft
for Public Comment at the time.
CENELEC is asking national
committees to vote on whether
CENELEC should adopt the IEC
standard together with proposed
CENELEC common modifications
which appear in this draft. If it
passes the vote in CENELEC it will
be implemented by BSI as BS EN
60745-2-21.
Contact: Geraldine Salt
Email: [email protected]
CPL/61/6
CEN EUROPEAN
STANDARDSEN 26:-
Gas-fired instantaneous water
heaters for the production of
domestic hot water, fitted with
atmospheric burners
AMENDMENT 3:October 2006
GSE/29
EN 30:-
Domestic cooking appliances
burning gas
EN 30-1-3:-
Safety. Appliances having a glass
ceramic hotplate
AMENDMENT 1:October 2006
GSE/35
EN 54:-
Fire detection and fire alarm
systems
EN 54-2:-
Control and indicating equipment
AMENDMENT 1:October 2006
FSH/12
Page 47 of 81CEN EUROPEAN STANDARDS
EN 71:-
Safety of toys
EN 71-1:-
Mechanical and physical properties
AMENDMENT 3:October 2006
CW/15
EN 89:-
Gas-fired storage water heaters for
the production of domestic hot
water
AMENDMENT 3:October 2006
GSE/29
EN 137:2006
Respiratory protective devices.
Self-contained open-circuit
compressed air breathing
apparatus with full face mask.
Requirements, testing, marking
PH/4
EN 253:-
District heating pipes. Preinsulated
bonded pipe systems for directly
buried hot water networks. Pipe
assembly of steel service pipe,
polyurethane thermal insulation
and outer casing of polyethylene
AMENDMENT 2:November 2006
RHE/9
EN 284:2006
Swap bodies. Non-stackable swap
bodies of class C. Dimensions and
general requirements
TW/1
EN 303:-
Heating boilers
EN 303-7:2006
Gas-fired central heating boilers
equipped with a forced draught
burner of nominal heat output not
exceeding 1000 kW
GSE/29
EN 480:-
Admixtures for concrete, mortar
and grout. Test methods
EN 480-1:2006
Reference concrete and reference
mortar for testing
B/517/3
EN 500:-
Mobile road construction
machinery. Safety
EN 500-1:2006
Common requirements
B/513/1
EN 500-2:2006
Specific requirements for
road-milling machines
B/513/1
EN 500-3:2006
Specific requirements for
soil-stabilizing machines and
recycling machines
B/513/1
EN 500-4:2006
Specific requirements for
compaction machines
B/513/1
EN 500-6:2006
Specific requirements for
paver-finishers
B/513/1
EN 1197:2006
Chemicals used for treatment of
water intended for human
consumption. Monozinc phosphate
solution
CII/59
EN 1496:2006
Personal fall protection equipment.
Rescue lifting devices
PH/5
EN 1498:2006
Personal fall protection equipment.
Rescue loops
PH/5
EN 1544:2006
Products and systems for the
protection and repair of concrete
structures. Test methods.
Determination of creep under
sustained tensile load for synthetic
resin products (PC) for the
anchoring of reinforcing bars
B/517/8
EN 1604:-
Thermal insulating products for
building applications.
Determination of dimensional
stability under specified
temperature and humidity
conditions
AMENDMENT 1:September 2006
B/540
EN 1605:-
Thermal insulating products for
building applications.
Determination of deformation
under specified compressive load
and temperature conditions
AMENDMENT 1:September 2006
B/540
EN 1606:-
Thermal insulating products for
building applications.
Determination of compressive
creep
AMENDMENT 1:September 2006
B/540
Page 48 of 81CEN EUROPEAN STANDARDS
EN 1800:2006
Transportable gas cylinders.
Acetylene cylinders. Basic
requirements, definitions and type
testing
PVE/3/7
EN 1881:2006
Products and systems for the
protection and repair of concrete
structures. Test methods. Testing
of anchoring products by the
pull-out method
B/517/8
EN 1993:-
Eurocode 3: Design of steel
structures
EN 1993-1-3:2006
General rules. Supplementary
rules for cold-formed members and
sheeting
B/525/31
EN 1993-1-4:2006
General rules. Supplementary
rules for stainless steel
B/525/31
EN 1993-1-5:2006
Plated structural elements
B/525/31
EN 1993-1-11:2006
Design of structures with tension
components
B/525/31
EN 1993-2:2006
Steel bridges
B/525/31
EN 1993-3:-
Towers, masts and chimneys
EN 1993-3-1:2006
Towers and masts
B/525/32
EN 1993-3-2:2006
Chimneys
B/525/32
EN 2349:-
Aerospace series. Requirements
and test procedures for relays and
contactors
EN 2349-201:2006
Visual inspection
ACE/6/-/4
EN 2349-202:2006
Examination of dimensions and
mass
ACE/6/-/4
EN 2349-301:2006
Pick-up and drop-out voltage
ACE/6/-/4
EN 2349-302:2006
Insulation resistance
ACE/6/-/4
EN 2349-303:2006
Dielectric strength
ACE/6/-/4
EN 2349-304:2006
Operate and release time
ACE/6/-/4
EN 2349-305:2006
Bounce time
ACE/6/-/4
EN 2349-306:2006
Overload D.C. and A.C.
ACE/6/-/4
EN 2349-307:2006
Contact voltage drop
ACE/6/-/4
EN 2349-308:2006
Coil current
ACE/6/-/4
EN 2349-309:2006
Exported spikes
ACE/6/-/4
EN 2349-310:2006
Rupture
ACE/6/-/4
EN 2349-312:2006
Electrical service life. Mixed load
ACE/6/-/4
EN 2349-316:2006
Mechanical life (endurance at
reduced load)
ACE/6/-/4
EN 2349-317:2006
Service life of coil switching device
ACE/6/-/4
EN 2349-318:2006
Pick-up voltage at high
temperature and drop-out voltage
at low temperature
ACE/6/-/4
EN 2349-319:2006
Miss test
ACE/6/-/4
EN 2349-402:2006
Corrosion, salt spray
ACE/6/-/4
EN 2349-405:2006
Fluid resistance
ACE/6/-/4
Page 49 of 81CEN EUROPEAN STANDARDS
EN 2349-407:2006
Cold/low pressure and moist heat
ACE/6/-/4
EN 4234:2006
Aerospace series. Clamps, worm
drive. Dimensions, masses
ACE/69
EN 12430:-
Thermal insulating products for
building applications.
Determination of behaviour under
point load
AMENDMENT 1:September 2006
B/540
EN 12431:-
Thermal insulating products for
building applications.
Determination of thickness for
floating floor insulating products
AMENDMENT 1:September 2006
B/540
EN 12642:2006
Securing cargo on road vehicles.
Body structure of commercial
vehicles. Minimum requirements
PKW/0
EN 12735:-
Copper and copper alloys.
Seamless, round copper tubes for
air conditioning and refrigeration
EN 12735-1:-
Tubes for piping systems
AMENDMENT 1:April 2005
NFE/34/1
EN 13001:-
Cranes. General design
EN 13001-2:-
Load actions
AMENDMENT 1:October 2006
MHE/3/1
EN 13234:2006
Advanced technical ceramics.
Mechanical properties of ceramic
composites at ambient
temperature. Evaluation of the
resistance to crack propagation by
notch sensitivity testing
RPI/13
EN 13235:2006
Advanced technical ceramics.
Mechanical properties of ceramic
composites at high temperature
under inert atmosphere.
Determination of creep behaviour
RPI/13
EN 13307:-
Timber blanks and semi-finished
profiles for non-structural uses
EN 13307-1:2006
Requirements
B/543
EN 13317:-
Tanks for transport of dangerous
goods. Service equipment for
tanks. Manhole cover assembly
AMENDMENT 1:November 2006
AUE/18
EN 13321:-
Open data communication in
building automation, controls and
building management. Home and
building electronic systems
EN 13321-2:2006
KNXnet/IP communication
RHE/16
EN 13445:-
Unfired pressure vessels
EN 13445-8:2006
Additional requirements for
pressure vessels of aluminium and
aluminium alloys
PVE/1
EN 14041:-
Resilient, textile and laminate floor
coverings. Essential characteristics
CORRIGENDUM 1:October 2006
PRI/60
EN 14125:-
Thermoplastic and flexible metal
pipework for underground
installation at petrol filling stations
AMENDMENT 1:November 2006
PVE/21
EN 14220:2006
Timber and wood-based materials
in external windows, external door
leaves and external doorframes.
Requirements and specification
B/543
EN 14221:2006
Timber and wood-based materials
in internal windows, internal door
leaves and internal door frames.
Requirements and specification
B/543
EN 14255:-
Measurement and assessment of
personal exposures to incoherent
optical radiation
EN 14255-4:2006
Terminology and quantities used in
UV-, visible and IR-exposure
measurements
CPL/34/10
EN 14359:2006
Gas-loaded accumulators for fluid
power applications
MCE/18/-/1
Page 50 of 81CEN EUROPEAN STANDARDS
EN 14498:2004
Products and systems for the
protection and repair of concrete
structures. Test methods. Volume
and weight changes after air drying
and water storage cycles
B/517/8
EN 14630:2006
Products and systems for the
protection and repair of concrete
structures. Test methods.
Determination of carbonation depth
in hardened concrete by the
phenolphthalein method
B/517/8
EN 14673:2006
Safety of machinery. Safety
requirements for hydraulically
powered open die hot forging
presses for the forging of steel and
non-ferrous metals
MCE/23
EN 14885:2006
Chemical disinfectants and
antiseptics. Application of
European standards for chemical
disinfectants and antiseptics
CH/216
EN 14902:-
Ambient air quality. Standard
method for the measurement of
Pb, Cd, AS, and Ni in the PM 10
fraction of suspended particulate
matter
CORRIGENDUM 1:October 2006
EH/2/3
EN 14908:-
Open data communication in
building automation, controls and
building management. Control
network protocol
EN 14908-3:2006
Power line channel specification
RHE/16
EN 14908-4:2006
IP communication
RHE/16
EN 14957:2006
Food processing machinery.
Dishwashing machines with
conveyor. Safety and hygiene
requirements
MCE/3/5
EN 14963:2006
Roof coverings. Continuous
rooflights of plastics with or without
upstands. Classification,
requirements and test methods
B/542/8
EN 14964:2006
Rigid underlays for discontinuous
roofing. Definitions and
characteristics
B/542/1
EN 15006:2006
Metal aerosol containers.
Aluminium containers. Dimensions
of the 25,4 mm aperture
PKW/0
EN 15007:2006
Metal aerosol containers. Tinplate
containers. Dimensions of two and
three-piece cans
PKW/0
EN 15008:2006
Aerosol containers. Aluminium
containers. Dimensions of
one-piece cans with 25,4 mm
aperture
PKW/0
EN 15009:2006
Aerosol containers.
Compartmented aerosol containers
PKW/0
EN 15010:2006
Aerosol containers. Aluminium
containers. Tolerances of the
fundamental dimensions in
connection with the clinch
PKW/0
EN 15024:-
Copper and copper alloys.
Determination of zinc content
EN 15024-2:2006
Flame atomic absorption
spectrometry (FAAS)
NFE/34
EN 15033:2006
Room sealed storage water
heaters for the production of
sanitary hot water using LPG for
vehicles and boats
GSE/24
EN 15034:2006
Heating boilers. Condensing
heating boilers for fuel oil
RHE/10
EN 15063:-
Copper and copper alloys.
Determination of main constituents
and impurities by wavelength
dispersive X-ray fluorescence
spectrometry (XRF)
EN 15063-1:2006
Guidelines to the routine method
NFE/34
EN 15063-2:2006
Routine method
NFE/34
Page 51 of 81CEN EUROPEAN STANDARDS
EN 15097:2006
Irrigation techniques. Localised
irrigation. Hydraulic evaluation
AGE/30
EN 15189:2006
Ductile iron pipes, fittings and
accessories. External polyurethane
coating for pipes. Requirements
and test methods
PSE/10
EN 15218:2006
Air conditioners and liquid chilling
packages with evaporatively
cooled condenser and with
electrically driven compressors for
space cooling. Terms, definitions,
test conditions, test methods and
requirements
RHE/17
EN 15221:-
Facility management
EN 15221-1:2006
Terms and definitions
FMW/1
EN 15221-2:2006
Guidance on how to prepare facility
management agreements
FMW/1
CEN REPORTS
CEN/TR 15212:2006
Health informatics. Vocabulary.
Maintenance procedure for a
web-based terms and concepts
database
IST/35
CEN/TR 15300:2006
Health informatics. Framework for
formal modelling of healthcare
security policies
IST/35
CEN/TR 15351:2006
Plastics. Guide for vocabulary in
the field of degradable and
biodegradable polymers and
plastic items
PRI/82
CEN/TR 15441:2006
Solid recovered fuels. Guidelines
on occupational health aspects
PTI/17
CEN/TR 15508:2006
Key properties on solid recovered
fuels to be used for establishing a
classification system
PTI/17
CEN/TR 15522:-
Oil spill identification. Waterborne
petroleum and petroleum products
CEN/TR 15522-1:2006
Sampling
PTI/12
CEN/TR 15522-2:2006
Analytical methodology and
interpretation of results
PTI/12
CEN TECHNICAL
SPECIFICATIONSCEN/TS 15211:2006
Health informatics. Mapping of
hierarchical message descriptions
to XML
IST/35
CEN/TS 15213:-
Road transport and traffic
telematics. After-theft systems for
the recovery of stolen vehicles
CEN/TS 15213-3:2006
Interface and system requirements
for short range communication
EPL/278
CEN/TS 15213-4:2006
Interface and system requirements
for long range communication
EPL/278
CEN/TS 15213-5:2006
Messaging interface
EPL/278
CEN/TS 15400:2006
Solid recovered fuels. Methods for
the determination of calorific value
PTI/17
CEN/TS 15401:2006
Solid recovered fuels. Methods for
the determination of bulk density
PTI/17
CEN/TS 15402:2006
Solid recovered fuels. Methods for
the determination of the content of
volatile matter
PTI/17
CEN/TS 15403:2006
Solid recovered fuels. Methods for
the determination of ash content
PTI/17
CEN/TS 15405:2006
Solid recovered fuels. Methods for
the determination of density of
pellets and briquettes
PTI/17
CEN/TS 15406:2006
Solid recovered fuels. Methods for
the determination of bridging
properties of bulk material
PTI/17
Page 52 of 81CEN TECHNICAL SPECIFICATIONS
CEN/TS 15414:-
Solid recovered fuels.
Determination of moisture content
using the oven dry method
CEN/TS 15414-1:2006
Determination of total moisture by
a reference method
PTI/17
CEN/TS 15414-2:2006
Determination of total moisture by
a simplified method
PTI/17
CEN/TS 15414-3:2006
Moisture in general analysis
sample
PTI/17
CEN/TS 15415:2006
Solid recovered fuels.
Determination of particle size
distribution by screen method
PTI/17
CEN/TS 15442:2006
Solid recovered fuels. Methods for
sampling
PTI/17
CEN/TS 15443:2006
Solid recovered fuels. Methods for
laboratory sample preparation
PTI/17
CEN/TS 15448:2006
Postal services. Open standard
interface between image controller
and enrichment devices (OCRs,
video coding systems, voting
systems)
SVS/4
CEN/TS 15451:2006
Fertilizers. Determination of
chelating agents. Determination of
iron chelated by EDDHSA by ion
pair chromatography
CII/37
CEN/TS 15452:2006
Fertilizers. Determination of
chelating agents. Determination of
iron chelated by o,p-EDDHA by
reversed phase HPLC
CII/37
CENELEC PUBLICATIONS
EN 50050:2006
Electrical apparatus for potentially
explosive atmospheres.
Electrostatic hand-held spraying
equipment
GEL/31/18
EN 50065:-
Signalling on low-voltage electrical
installations in the frequency range
3 kHz to 148,5 kHz
EN 50065-2-2:-
Immunity requirements for mains
communications equipment and
systems operating in the range of
frequencies 95 kHz to 148,5 kHz
and intended for use in industrial
environments
CORRIGENDUM:October 2006
PEL/205
EN 50085:-
Cable trunking systems and cable
ducting systems for electrical
installations
EN 50085-2-1:2006
Cable trunking systems and cable
ducting systems intended for
mounting on walls and ceilings
PEL/213
EN 50090:-
Home and building electronic
systems (HBES)
EN 50090-5-3:2006
Media and media dependent
layers. Radio frequency
IST/6
EN 50131:-
Alarm systems. Intrusion and
hold-up systems
EN 50131-1:2006
System requirements
GW/1
EN 50177:2006
Automatic electrostatic spraying
equipment for flammable coating
powder.
GEL/31/18
EN 50216:-
Power transformer and reactor
fittings
EN 50216-3:-
Protective relay for hermetically
sealed liquid-immersed
transformers and reactors without
gaseous cushion
AMENDMENT 2:October 2006
PEL/14
EN 50216-5:-
Liquid level, pressure and flow
indicators, pressure relief devices
and dehydrating breathers
AMENDMENT 3:October 2006
PEL/14
EN 50216-8:-
Butterfly valves for insulating liquid
circuits
AMENDMENT 1:October 2006
PEL/14
Page 53 of 81CENELEC PUBLICATIONS
EN 50341:-
Overhead electrical lines
exceeding A.C. 45 kV
EN 50341-2:-
Index of national normative
aspects
CORRIGENDUM 1:October 2006
PEL/11
EN 50341-3:-
Set of national normative aspects
CORRIGENDUM:October 2006
PEL/11
EN 50470:-
Electricity metering equipment
(A.C.)
EN 50470-1:2006
General requirements, tests and
test conditions. Metering
equipment (class indexes A, B and
C)
PEL/13
EN 50470-2:2006
Particular requirements.
Electromechanical meters for
active energy (class indexes A and
B)
PEL/13
EN 50470-3:2006
Particular requirements. Static
meters for active energy (class
indexes A, B and C)
PEL/13
EN 60027:-
Letter symbols to be used in
electrical technology
EN 60027-1:2006:2006
(IEC 60027-1:1992)
General
SS/7
EN 60076:-
Power transformers
EN 60076-5:2006
(IEC 60076-5:2006)
Ability to withstand short circuit
PEL/14
EN 60204:-
Safety of machinery. Electrical
equipment of machines
EN 60204-1:2006
(IEC 60204-1:2005)
General requirements
GEL/44
EN 60216:-
Electrical insulating materials.
Thermal endurance properties
EN 60216-6:2006
(IEC 60216-6:2006)
Determination of thermal
endurance indices (TI and RTE) of
an insulating material using the
fixed time frame method
GEL/112
EN 60297:-
Mechanical structures for
electronic equipment. Dimensions
of mechanical structures of the
482,6 mm (19 in) series
EN 60297-3-104:2006
(IEC 60297-3-104:2006)
Connector dependent interface
dimensions for subracks and
plug-in units
EPL/48/4
EN 60335:-
Household and similar electrical
appliances. Safety
EN 60335-2-40:-
(IEC 60335-2-40:2002/A1:2005)
Particular requirements for
electrical heat pumps, air
conditioners and dehumidifiers
AMENDMENT 1:April 2006
CPL/61/4
EN 60439:-
Low-voltage switchgear and
controlgear assemblies
EN 60439-5:2006
(IEC 60439-5:2006)
Particular requirements for
assemblies for power distribution in
public networks
PEL/17/3
EN 60456:-
Clothes washing machines for
household use. Methods for
measuring the performance
AMENDMENT 11:October 2006
CPL/59/1
EN 60598:-
Luminaires
EN 60598-2-12:2006
(IEC 60598-2-12:2006)
Particular requirements. Mains
socket-outlet mounted nightlights
GEL/210/12
EN 60601:-
Medical electrical equipment
EN 60601-1:2006
(IEC 60601-1:2005)
General requirements for basic
safety and essential performance
CH/62/1
EN 60695:-
Fire hazard testing
Page 54 of 81CENELEC PUBLICATIONS
EN 60695-4:2006
(IEC 60695-4:2005)
Terminology concerning fire tests
for electrotechnical products
GEL/89
EN 60730:-
Automatic controls for household
and similar use
EN 60730-2-2:-
(IEC 60730-2-2:2001/A1:2005
MODIFIED)
Particular requirements for thermal
motor protectors
AMENDMENT 1:April 2006
CPL/72
EN 60738:-
Thermistors. Directly heated
positive temperature coefficient
EN 60738-1:2006
(IEC 60738-1:2006)
Generic specification
EPL/40X
EN 60770:-
Transmitters for use in
industrial-process control systems
EN 60770-3:2006
(IEC 60770-3:2006)
Methods for performance
evaluation of intelligent transmitters
GEL/65/2
EN 60793:-
Optical fibres
EN 60793-1-34:2006
(IEC 60793-1-34:2006)
Measurement methods and test
procedures. Fibre curl
GEL/86/1
EN 60793-2-40:2006
(IEC 60793-2-40:2006)
Product specifications. Sectional
specification for category A4
multimode fibres
GEL/86/1
EN 60825:-
Safety of laser products
EN 60825-4:2006
(IEC 60825-4:2006)
Laser guards
EPL/76
EN 60958:-
Digital audio interface
EN 60958-3:2006
(IEC 60958-3:2006)
Consumer applications
EPL/100
EN 61009:-
Residual current operated
circuit-breakers with integral
overcurrent protection for
household and similar uses
(RCBO's)
EN 61009-1:-
(IEC 61009-1:1996)
General rules
CORRIGENDUM:July 2006
PEL/23/1
EN 61076:-
Connectors for electronic
equipment. Product requirements
EN 61076-1:2006
(IEC 61076-1:2006)
Generic specification
EPL/48
EN 61076-3:-
Detail specification
EN 61076-3-104:2006
(IEC 61076-3-104:2006)
8-way, shielded free and fixed
connectors for data transmissions
with frequencies up to 1000 MHz
EPL/48
EN 61076-3-112:2006
(IEC 61076-3-112:2006)
Rectangular connectors with four
contacts for high performance
serial bus for consumer
audio/video equipment
EPL/48/2
EN 61124:2006
(IEC 61124:2006)
Reliability testing. Compliance
tests for constant failure rate and
constant failure intensity
DS/1
EN 61212:-
Industrial rigid round laminated
tubes and rods based on
thermosetting resins for electrical
purposes
EN 61212-1:2006
(IEC 61212-1:2006)
Definitions, designations and
general requirements
GEL/15/3/6
EN 61212-3:-
Specifications for individual
materials
EN 61212-3-1:2006
(IEC 61212-3-1:2006)
Round laminated rolled tubes
GEL/15/3/6
EN 61212-3-3:2006
(IEC 61212-3-3:2006)
Round laminated moulded rods
GEL/15/3/6
Page 55 of 81CENELEC PUBLICATIONS
EN 61307:2006
(IEC 61307:2006)
Industrial microwave heating
installations. Test methods for the
determination of power output
PEL/27
EN 61391:-
Ultrasonics. Pulse-echo scanners
EN 61391-1:2006
(IEC 61391-1:2006)
Techniques for calibrating spatial
measurement systems and
measurement of system
point-spread function response
EPL/87
EN 61400:-
Wind turbines
EN 61400-12-1:2006
(IEC 61400-12-1:2005)
Power performance measurements
of electricity producing wind
turbines
PEL/88
EN 61582:2006
(IEC 61582:2004)
Radiation protection
instrumentation. In vivo counters.
Classification, general
requirements and test procedures
for portable, transportable and
installed equipment
NCE/2
EN 61587:-
Mechanical structures for
electronic equipment. Tests for IEC
60917 and IEC 60297
EN 61587-3:2006
(IEC 61587-3:2006)
Electromagnetic shielding
performance tests for cabinets,
racks and sub-racks
EPL/48
EN 61747:-
Liquid crystal display devices
EN 61747-3-1:2006
(IEC 61747-3-1:2006)
Liquid crystal display (LCD) cells.
Blank detail specification
EPL/47
EN 61788:-
Superconductivity
EN 61788-10:2006
(IEC 61788-10:2006)
Critical temperature measurement.
Critical temperature of composite
superconductors by a resistance
method
L/-/90
EN 61810:-
Electromechanical elementary
relays
EN 61810-7:2006
(IEC 61810-7:2006)
Test and measurement procedures
EPL/94
EN 61924:2006
(IEC 61924:2006)
Maritime navigation and
radiocommunication equipment
and systems. Integrated navigation
systems. Operational and
performance requirements,
methods of testing and required
test results
EPL/80
EN 61966:-
Multimedia systems and
equipment. Colour measurement
and management
EN 61966-6:2006
(IEC 61966-6:2005)
Front projection displays
EPL/100
EN 61970:-
Energy management system
application program interface
(EMS-API)
EN 61970-501:2006
(IEC 61970-501:2006)
Common information model
resource description framework
(CIM RDF) schema
PEL/57
EN 61996:-
Maritime navigation and
radiocommunication equipment
and systems. Shipborne voyage
data recorder (VDR)
EN 61996-2:2006
(IEC 61996-2:2006)
Simplified voyage data recorder
(S-VDR). Performance
requirements, methods of testing
and required test results
EPL/80
EN 62047:-
Semiconductor devices.
Micro-electromechanical devices
EN 62047-1:2006
(IEC 62047-1:2005)
Terms and definitions
EPL/47
EN 62132:-
Integrated circuits. Measurement of
electromagnetic immunity. 150 kHZ
to 1 GHz
Page 56 of 81CENELEC PUBLICATIONS
EN 62132-4:2006
(IEC 62132-4:2006)
Direct RF power injection method
EPL/47
EN 62141:2006
(IEC 62141:2005)
Helical-scan digital video cassette
recording format using 12,65 mm
magnetic tape and incorporating
MPEG-4 compression. Type D-16
format
EPL/100
EN 62197:-
Connectors for electronic
equipment. Quality assessment
requirements
EN 62197-1:2006
(IEC 62197-1:2006)
Generic specification
EPL/48
EN 62271:-
High-voltage switchgear and
controlgear
EN 62271-100:-
(IEC 62271-100:2001/A2:2006)
High-voltage alternating-current
circuit-breakers
AMENDMENT 2:October 2006
PEL/17/1
EN 62271-201:2006
(IEC 62271-201:2006)
A.C. insulation-enclosed
switchgear and controlgear for
rated voltages above 1 kV and up
to and including 52 Kv
PEL/17/1
EN 62282:-
Fuel cell technologies
EN 62282-3-2:2006
(IEC 62282-3-2:2006)
Stationary fuel cell power plants.
Performance test methods
GEL/105
EN 62287:-
Maritime navigation and
radiocommunication equipment
and systems. Class B shipborne
equipment of the automatic
identification system (AIS)
EN 62287-1:2006
(IEC 62287-1:2006)
Carrier-sense time division multiple
access (CSTDMA) techniques
EPL/80
EN 62329:-
Heat shrinkable moulded shapes
EN 62329-2:2006
(IEC 62329-2:2006)
Methods of test
GEL/15/3/5
EN 62389:2006
(IEC 62389:2005)
Methods of measurement for DVD
players
EPL/100
EN 62391:-
Fixed electric double-layer
capacitors for use in electronic
equipment
EN 62391-1:2006
(IEC 62391-1:2006)
Generic specification
EPL/40X
EN 62391-2-1:2006
(IEC 62391-2-1:2006)
Blank detail specification.
Electric-double layer capacitors for
power application. Assessment
level EZ
EPL/40X
HARMONIZATION
DOCUMENTSCENELEC HD 60364:-
Electrical installations of buildings
CENELEC HD 60364-5-51:2006
(IEC 60364-5-51:2005)
Selection and erection of electrical
equipment. Common rules
JPEL/64
ETSI (EUROPEAN
TELECOMMUNICATIONS
STANDARDS INSTITUTE)
EUROPEAN PUBLICATIONSEN 302 194:-
Electromagnetic compatibility and
radio spectrum matters (ERM).
Navigation radar used on inland
waterways
EN 302 194-1: October 2006
(Version 1.1.2)
Technical characteristics and
methods of measurement
OTHER ETSI (EUROPEAN
TELECOMMUNICATIONS
STANDARDS INSTITUTE)
PUBLICATIONSTR 102 437: October 2006
(Version 1.1.1)
Electronic signatures and
infrastructures (ESI). Guidance on
TS 101 456 (policy requirements
for certification authorities issuing
qualified certificates)
Page 57 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TR 102 506: October 2006
(Version 1.1.1)
Speech processing, transmission
and quality aspects (STQ).
Estimating speech quality per call
TR 102 647: October 2006
(Version 1.2.1)
Telecommunications and internet
converged services and protocols
for advanced networking
(TISPAN). Network management.
Operation support system
standards overview and gap
analysis
TR 125 902: September 2006
(Version 6.1.0)
Universal mobile
telecommunications system
(UMTS). Iub/Iur congestion control
(3GPP TR 25.902 version 6.1.0
release 6)
TR 125 931: September 2006
(Version 7.2.0)
Universal mobile
telecommunications system
(UMTS). UTRAN functions,
examples on signalling procedures
(3GPP TR 25.931 version 7.2.0
release 7)
TR 125 951: October 2006
(Version 6.3.0)
Universal mobile
telecommunications system
(UMTS). Base station (BS)
classification (FDD) (3GPP TR
25.951 version 6.3.0 release 6)
TR 126 911: September 2006
(Version 7.1.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Codec(s) for
circuit-switched (CS) multimedia
telephony service. Terminal
implementer's guide (3GPP TR
26.911 version 7.1.0 release 7)
TR 126 946: September 2006
(Version 6.1.0)
Universal mobile
telecommunications system
(UMTS). Multimedia
broadcast/multicast service
(MBMS) user service guidelines
(3GPP TR 26.946 version 6.1.0
release 6)
TR 133 978: September 2006
(Version 6.5.0)
Universal mobile
telecommunications system
(UMTS). Security aspects of early
IP multimedia subsystem (IMS)
(3GPP TR 33.978 version 6.5.0
release 6)
TR 181 007: October 2006
(Version 1.1.1)
Telecommunications and internet
converged services and protocols
for advanced networking
(TISPAN). Overview of messaging
services
TR 181 007: October 2006
(Version 2.1.1)
TR 182 015: October 2006
(Version 1.1.1)
Telecommunications and internet
converged services and protocols
for advanced networking
(TISPAN). Next generation
networks. Architecture for control
of processing overload
TS 100 392:-
Terrestrial trunked radio (TETRA).
Voice plus data (V+D)
TS 100 392-7: October 2006
(Version 2.4.1)
Security
TS 101 220: October 2006
(Version 7.7.0)
Smart cards. ETSI numbering
system for telecommunication
application providers (release 7)
TS 101 952:-
Access network xDSL transmission
filters
TS 101 952-1-5: October 2006
(Version 1.2.1)
ADSL splitters for European
deployment. Specification for
ADSL over POTS distributed filters
TS 102 034: September 2006
(Version 1.2.1)
Digital video broadcasting (DVB).
Transport of MPEG-2 based DVB
services over IP based networks
TS 102 127: October 2006
(Version 6.7.0)
Smart cards. Transport protocol for
CAT applications. Stage 2 (release
6)
TS 102 221: October 2006
(Version 6.13.0)
Smart cards. UICC-terminal
interface. Physical and logical
characteristics (release 6)
TS 102 221: October 2006
(Version 7.7.0)
(release 7)
Page 58 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 102 224: October 2006
(Version 7.1.0)
Smart cards. Security mechanisms
for UICC based applications.
Functional requirements (release
7)
TS 102 225: October 2006
(Version 6.8.0)
Smart cards. Secured packet
structure for UICC based
applications (release 6)
TS 102 226: October 2006
(Version 6.15.0)
Smart cards. Remote APDU
structure for UICC based
applications (release 6)
TS 102 226: October 2006
(Version 7.2.0)
(release 7)
TS 102 241: March 2006
(Version 7.5.1)
Smart cards. UICC application
programming interface (UICC API)
for Java card (TM) (release 7)
TS 102 241: October 2006
(Version 7.6.0)
TS 102 412: October 2006
(Version 7.6.0)
Smart cards. Smart card platform
requirements stage 1 (release 7)
TS 102 429:-
Satellite earth stations and
systems (SES). Broadband
satellite multimedia (BSM).
Regenerative satellite mesh-B
(RSM-B). DVB-S/DVB-RCS family
for regenerative satellites
TS 102 429-1: October 2006
(Version 1.1.1)
System overview
TS 102 429-2: October 2006
(Version 1.1.1)
Satellite link control layer
TS 102 429-3: October 2006
(Version 1.1.1)
Connection control protocol
TS 102 429-4: October 2006
(Version 1.1.1)
Specific management information
base
TS 122 090: June 2006
(Version 7.0.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Unstructured
supplementary service data
(USSD). Stage 1 (3GPP TS 22.090
version 7.0.0 release 7)
TS 122 101: September 2006
(Version 7.7.0)
Universal mobile
telecommunications system
(UMTS). Service aspects. Service
principles (3GPP TS 22.101
version 7.7.0 release 7)
TS 122 228: September 2006
(Version 7.5.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Service requirements for
the internet protocol (IP)
multimedia core network
subsystem (IMS). Stage 1 (3GPP
TS 22.228 version 7.5.0 release 7)
TS 123 003: September 2006
(Version 3.15.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Numbering, addressing
and identification (3GPP TS 23.003
version 3.15.0 release 1999)
TS 123 003: September 2006
(Version 4.9.0)
(3GPP TS 23.003 version 4.9.0
release 4)
TS 123 003: September 2006
(Version 6.11.0)
(3GPP TS 23.003 version 6.11.0
release 6)
TS 123 008: September 2006
(Version 5.11.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Organization of
subscriber data (3GPP TS 23.008
version 5.11.0 release 5)
TS 123 008: September 2006
(Version 6.11.0)
(3GPP TS 23.008 version 6.11.0
release 6)
TS 123 008: September 2006
(Version 7.3.0)
(3GPP TS 23.008 version 7.3.0
release 7)
TS 123 018: September 2006
(Version 5.10.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Basic call handling.
Technical realization (3GPP TS
23.018 version 5.10.0 release 5)
Page 59 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 123 018: September 2006
(Version 6.6.0)
(3GPP TS 23.018 version 6.6.0
release 6)
TS 123 040: October 2006
(Version 6.8.1)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Technical realization of
short message service (SMS)
(3GPP TS 23.040 version 6.8.1
release 6)
TS 123 060: September 2006
(Version 6.14.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). General packet radio
service (GPRS). Service
description. Stage 2 (3GPP TS
23.060 version 6.14.0 release 6)
TS 123 122: June 2006
(Version 7.5.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Non-access-stratum
(NAS) functions related to mobile
station (MS) in idle mode (3GPP
TS 23.122 version 7.5.0 release 7)
TS 123 122: September 2006
(Version 7.6.0)
(3GPP TS 23.122 version 7.6.0
release 7)
TS 123 141: September 2006
(Version 7.2.0)
Universal mobile
telecommunications system
(UMTS). Presence service.
Architecture and functional
description. Stage 2 (3GPP TS
23.141 version 7.2.0 release 7)
TS 123 205: September 2006
(Version 4.11.0)
Universal mobile
telecommunications system
(UMTS). Bearer-independent
circuit-switched core network.
Stage 2 (3GPP TS 23.205 version
4.11.0 release 4)
TS 123 205: September 2006
(Version 5.13.0)
(3GPP TS 23.205 version 5.13.0
release 5)
TS 123 218: October 2006
(Version 7.3.1)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). IP multimedia (IM)
session handling. IM call model.
Stage 2 (3GPP TS 23.218 version
7.3.1 release 7)
TS 123 228: September 2006
(Version 6.15.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). IP multimedia subsystem
(IMS). Stage 2 (3GPP TS 23.228
version 6.15.0 release 6)
TS 123 228: September 2006
(Version 7.5.0)
(3GPP TS 23.228 version 7.5.0
release 7)
TS 123 234: September 2006
(Version 6.10.0)
Universal mobile
telecommunications system
(UMTS). 3GPP system to wireless
local area network (WLAN)
interworking. System description
(3GPP TS 23.234 version 6.10.0
release 6)
TS 124 008: September 2006
(Version 6.14.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Mobile radio interface
layer 3 specification. Core network
protocols. Stage 3 (3GPP TS
24.008 version 6.14.0 release 6)
TS 124 008: September 2006
(Version 7.5.0)
(3GPP TS 24.008 version 7.5.0
release 7)
TS 124 080: September 2006
(Version 7.2.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Mobile radio layer 3
supplementary service
specification. Formats and coding
(3GPP TS 24.080 version 7.2.0
release 7)
TS 124 109: September 2006
(Version 6.7.0)
Universal mobile
telecommunications system
(UMTS). Bootstrapping interface
(Ub) and network application
function interface (Ua). Protocol
details (3GPP TS 24.109 version
6.7.0 release 6)
TS 124 109: September 2006
(Version 7.4.0)
(3GPP TS 24.109 version 7.4.0
release 7)
Page 60 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 124 141: September 2006
(Version 6.7.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Presence service using
the IP multimedia (IM) core
network (CN) subsystem. Stage 3
(3GPP TS 24.141 version 6.7.0
release 6)
TS 124 141: September 2006
(Version 7.2.0)
(3GPP TS 24.141 version 7.2.0
release 7)
TS 124 147: September 2006
(Version 6.5.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Conferencing using the IP
multimedia (IM) core network (CN)
subsystem. Stage 3 (3GPP TS
24.147 version 6.5.0 release 6)
TS 124 167: September 2006
(Version 6.5.0)
Universal mobile
telecommunications system
(UMTS). 3GPP IMS management
object (MO). Stage 3 (3GPP TS
24.167 version 6.5.0 release 6)
TS 124 228: September 2006
(Version 5.15.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Signalling flows for the IP
multimedia call control based on
session initiation protocol (SIP) and
session description protocol (SDP).
Stage 3 (3GPP TS 24.228 version
5.15.0 release 5)
TS 124 229: September 2006
(Version 5.18.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Internet protocol (IP)
multimedia call control protocol
based on session initiation protocol
(SIP) and session description
protocol (SDP). Stage 3 (3GPP TS
24.229 version 5.18.0 release 5)
TS 124 229: September 2006
(Version 6.12.0)
(3GPP TS 24.229 version 6.12.0
release 6)
TS 124 229: October 2006
(Version 7.5.1)
(3GPP TS 24.229 version 7.5.1
release 7)
TS 124 234: September 2006
(Version 6.7.0)
Universal mobile
telecommunications system
(UMTS). 3GPP system to wireless
local area network (WLAN)
interworking. WLAN user
equipment (WLAN UE) to network
protocols. Stage 3 (3GPP TS
24.234 version 6.7.0 release 6)
TS 124 234: September 2006
(Version 7.3.0)
(3GPP TS 24.234 version 7.3.0
release 7)
TS 124 247: September 2006
(Version 6.6.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Messaging using the IP
multimedia (IM) core network (CN)
subsystem. Stage 3 (3GPP TS
24.247 version 6.6.0 release 6)
TS 125 101: October 2006
(Version 6.13.0)
Universal mobile
telecommunications system
(UMTS). User equipment (UE)
radio transmission and reception
(FDD) (3GPP TS 25.101 version
6.13.0 release 6)
TS 125 101: October 2006
(Version 7.5.0)
(3GPP TS 25.101 version 7.5.0
release 7)
TS 125 102: October 2006
(Version 3.13.0)
Universal mobile
telecommunications system
(UMTS). User equipment (UE)
radio transmission and reception
(TDD) (3GPP TS 25.102 version
3.13.0 release 1999)
TS 125 102: October 2006
(Version 4.8.0)
(3GPP TS 25.102 version 4.8.0
release 4)
TS 125 102: October 2006
(Version 5.9.0)
(3GPP TS 25.102 version 5.9.0
release 5)
TS 125 102: October 2006
(Version 6.5.0)
(3GPP TS 25.102 version 6.5.0
release 6)
TS 125 102: October 2006
(Version 7.4.0)
(3GPP TS 25.102 version 7.4.0
release 7)
Page 61 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 125 105: October 2006
(Version 3.14.0)
Universal mobile
telecommunications system
(UMTS). Base station (BS) radio
transmission and reception (TDD)
(3GPP TS 25.105 version 3.14.0
release 1999)
TS 125 105: October 2006
(Version 4.9.0)
(3GPP TS 25.105 version 4.9.0
release 4)
TS 125 105: October 2006
(Version 5.7.0)
(3GPP TS 25.105 version 5.7.0
release 5)
TS 125 105: October 2006
(Version 6.3.0)
(3GPP TS 25.105 version 6.3.0
release 6)
TS 125 105: October 2006
(Version 7.3.0)
(3GPP TS 25.105 version 7.3.0
release 7)
TS 125 106: October 2006
(Version 5.11.0)
Universal mobile
telecommunications system
(UMTS). UTRA repeater radio
transmission and reception (3GPP
TS 25.106 version 5.11.0 release
5)
TS 125 106: October 2006
(Version 6.5.0)
(3GPP TS 25.106 version 6.5.0
release 6)
TS 125 106: October 2006
(Version 7.1.0)
(3GPP TS 25.106 version 7.1.0
release 7)
TS 125 113: October 2006
(Version 7.4.0)
Universal mobile
telecommunications system
(UMTS). Base station and repeater
electromagnetic compatibility
(EMC) (3GPP TS 25.113 version
7.4.0 release 7)
TS 125 123: October 2006
(Version 6.8.0)
Universal mobile
telecommunications system
(UMTS). Requirements for support
of radio resource management
(TDD) (3GPP TS 25.123 version
6.8.0 release 6)
TS 125 123: October 2006
(Version 7.2.0)
(3GPP TS 25.123 version 7.2.0
release 7)
TS 125 133: October 2006
(Version 6.15.0)
Universal mobile
telecommunications system
(UMTS). Requirements for support
of radio resource management
(FDD) (3GPP TS 25.133 version
6.15.0 release 6)
TS 125 133: October 2006
(Version 7.5.0)
(3GPP TS 25.133 version 7.5.0
release 7)
TS 125 141: October 2006
(Version 6.15.0)
Universal mobile
telecommunications system
(UMTS). Base station (BS)
conformance testing (FDD) (3GPP
TS 25.141 version 6.15.0 release
6)
TS 125 141: October 2006
(Version 7.5.0)
(3GPP TS 25.141 version 7.5.0
release 7)
TS 125 142: October 2006
(Version 3.14.0)
Universal mobile
telecommunications system
(UMTS). Base station (BS)
conformance testing (TDD) (3GPP
TS 25.142 version 3.14.0 release
1999)
TS 125 142: October 2006
(Version 4.11.0)
(3GPP TS 25.142 version 4.11.0
release 4)
TS 125 142: October 2006
(Version 5.9.0)
(3GPP TS 25.142 version 5.9.0
release 5)
TS 125 142: October 2006
(Version 6.5.0)
(3GPP TS 25.142 version 6.5.0
release 6)
TS 125 142: October 2006
(Version 7.3.0)
(3GPP TS 25.142 version 7.3.0
release 7)
TS 125 143: October 2006
(Version 5.11.0)
Universal mobile
telecommunications system
(UMTS). UTRA repeater
conformance testing (3GPP TS
25.143 version 5.11.0 release 5)
TS 125 143: October 2006
(Version 6.5.0)
(3GPP TS 25.143 version 6.5.0
release 6)
Page 62 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 125 143: October 2006
(Version 7.1.0)
(3GPP TS 25.143 version 7.1.0
release 7)
TS 125 201: March 2006
(Version 7.0.0)
Universal mobile
telecommunications system
(UMTS). Physical layer - general
description (3GPP TS 25.201
version 7.0.0 release 7)
TS 125 201: September 2006
(Version 7.1.0)
(3GPP TS 25.201 version 7.1.0
release 7)
TS 125 202: September 2006
(Version 7.0.0)
Universal mobile
telecommunications system
(UMTS). 7.68Mcps time division
duplex (TDD) option. Overall
description. Stage 2 (3GPP TS
25.202 version 7.0.0 release 7)
TS 125 202: September 2006
(Version 7.1.0)
(3GPP TS 25.202 version 7.1.0
release 7)
TS 125 211: March 2006
(Version 7.0.0)
Universal mobile
telecommunications system
(UMTS). Physical channels and
mapping of transport channels onto
physical channels (FDD) (3GPP
TS 25.211 version 7.0.0 release 7)
TS 125 212: September 2006
(Version 6.9.0)
Universal mobile
telecommunications system
(UMTS). Multiplexing and channel
coding (FDD) (3GPP TS 25.212
version 6.9.0 release 6)
TS 125 212: September 2006
(Version 7.2.0)
(3GPP TS 25.212 version 7.2.0
release 7)
TS 125 213: March 2006
(Version 7.0.0)
Universal mobile
telecommunications system
(UMTS). Spreading and
modulation (FDD) (3GPP TS
25.213 version 7.0.0 release 7)
TS 125 214: September 2006
(Version 6.10.0)
Universal mobile
telecommunications system
(UMTS). Physical layer procedures
(FDD) (3GPP TS 25.214 version
6.10.0 release 6)
TS 125 214: September 2006
(Version 7.2.0)
(3GPP TS 25.214 version 7.2.0
release 7)
TS 125 215: March 2006
(Version 7.0.0)
Universal mobile
telecommunications system
(UMTS). Physical layer.
Measurements (FDD) (3GPP TS
25.215 version 7.0.0 release 7)
TS 125 215: September 2006
(Version 7.1.0)
(3GPP TS 25.215 version 7.1.0
release 7)
TS 125 221: March 2006
(Version 7.0.0)
Universal mobile
telecommunications system
(UMTS). Physical channels and
mapping of transport channels onto
physical channels (TDD) (3GPP
TS 25.221 version 7.0.0 release 7)
TS 125 221: September 2006
(Version 7.1.0)
(3GPP TS 25.221 version 7.1.0
release 7)
TS 125 222: March 2006
(Version 7.0.0)
Universal mobile
telecommunications system
(UMTS). Multiplexing and channel
coding (TDD) (3GPP TS 25.222
version 7.0.0 release 7)
TS 125 222: September 2006
(Version 7.1.0)
(3GPP TS 25.222 version 7.1.0
release 7)
TS 125 223: September 2006
(Version 7.2.0)
Universal mobile
telecommunications system
(UMTS). Spreading and
modulation (TDD) (3GPP TS
25.223 version 7.2.0 release 7)
TS 125 224: September 2006
(Version 6.6.1)
Universal mobile
telecommunications system
(UMTS). Physical layer procedures
(TDD) (3GPP TS 25.224 version
6.6.1 release 6)
TS 125 224: March 2006
(Version 7.0.0)
(3GPP TS 25.224 version 7.0.0
release 7)
TS 125 224: September 2006
(Version 7.1.0)
(3GPP TS 25.224 version 7.1.0
release 7)
Page 63 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 125 225: September 2006
(Version 7.2.0)
Universal mobile
telecommunications system
(UMTS). Physical layer.
Measurements (TDD) (3GPP TS
25.225 version 7.2.0 release 7)
TS 125 401: September 2006
(Version 6.8.0)
Universal mobile
telecommunications system
(UMTS). UTRAN overall
description (3GPP TS 25.401
version 6.8.0 release 6)
TS 125 401: September 2006
(Version 7.1.0)
(3GPP TS 25.401 version 7.1.0
release 7)
TS 125 402: September 2006
(Version 6.4.0)
Universal mobile
telecommunications system
(UMTS). Synchronization in
UTRAN. Stage 2 (3GPP TS 25.402
version 6.4.0 release 6)
TS 125 402: September 2006
(Version 7.1.0)
(3GPP TS 25.402 version 7.1.0
release 7)
TS 125 413: September 2006
(Version 6.11.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iu interface radio
access network application part
(RANAP) signalling (3GPP TS
25.413 version 6.11.0 release 6)
TS 125 413: September 2006
(Version 7.3.0)
(3GPP TS 25.413 version 7.3.0
release 7)
TS 125 414: September 2006
(Version 6.4.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iu interface data
transport and transport signalling
(3GPP TS 25.414 version 6.4.0
release 6)
TS 125 414: September 2006
(Version 7.1.0)
(3GPP TS 25.414 version 7.1.0
release 7)
TS 125 415: September 2006
(Version 7.2.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iu interface user
plane protocols (3GPP TS 25.415
version 7.2.0 release 7)
TS 125 420: September 2006
(Version 7.1.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iur interface
general aspects and principles
(3GPP TS 25.420 version 7.1.0
release 7)
TS 125 423: September 2006
(Version 6.11.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iur interface radio
network subsystem application part
(RNSAP) signalling (3GPP TS
25.423 version 6.11.0 release 6)
TS 125 423: September 2006
(Version 7.2.0)
(3GPP TS 25.423 version 7.2.0
release 7)
TS 125 425: September 2006
(Version 7.2.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iur interface user
plane protocols for common
transport channel data streams
(3GPP TS 25.425 version 7.2.0
release 7)
TS 125 427: September 2006
(Version 7.2.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iur/Iub interface
user plane protocol for DCH data
streams (3GPP TS 25.427 version
7.2.0 release 7)
TS 125 430: September 2006
(Version 7.1.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iub interface:
general aspects and principles
(3GPP TS 25.430 version 7.1.0
release 7)
TS 125 433: September 2006
(Version 5.16.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iub interface
node B application part (NBAP)
signalling (3GPP TS 25.433
version 5.16.0 release 5)
TS 125 435: September 2006
(Version 5.9.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iub interface user
plane protocols for common
transport channel data streams
(3GPP TS 25.435 version 5.9.0
release 5)
Page 64 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 125 435: September 2006
(Version 6.4.0)
(3GPP TS 25.435 version 6.4.0
release 6)
TS 125 435: September 2006
(Version 7.2.0)
(3GPP TS 25.435 version 7.2.0
release 7)
TS 125 453: September 2006
(Version 7.4.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iupc interface
positioning calculation application
part (PCAP) signalling (3GPP TS
25.453 version 7.4.0 release 7)
TS 126 234: September 2006
(Version 6.9.0)
Universal mobile
telecommunications system
(UMTS). Transparent end-to-end
packet-switched streaming service
(PSS). Protocols and codecs
(3GPP TS 26.234 version 6.9.0
release 6)
TS 126 246: September 2006
(Version 6.1.0)
Universal mobile
telecommunications system
(UMTS). Transparent end-to-end
packet-switched streaming service
(PSS). 3GPP SMIL language
profile (3GPP TS 26.246 version
6.1.0 release 6)
TS 126 346: September 2006
(Version 6.6.0)
Universal mobile
telecommunications system
(UMTS). Multimedia
broadcast/multicast service
(MBMS). Protocols and codecs
(3GPP TS 26.346 version 6.6.0
release 6)
TS 126 410: September 2006
(Version 6.7.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). General audio codec
audio processing functions.
Enhanced aacPlus general audio
codec. Floating-point ANSI-C code
(3GPP TS 26.410 version 6.7.0
release 6)
TS 126 411: September 2006
(Version 6.4.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). General audio codec
audio processing functions.
Enhanced aacPlus general audio
codec. Fixed-point ANSI-C code
(3GPP TS 26.411 version 6.4.0
release 6)
TS 128 062: September 2006
(Version 6.3.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Inband tandem free
operation (TFO) of speech codecs.
Service description. Stage 3
(3GPP TS 28.062 version 6.3.0
release 6)
TS 129 060: September 2006
(Version 6.14.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). General packet radio
service (GPRS). GPRS tunnelling
protocol (GTP) across the Gn and
Gp interface (3GPP TS 29.060
version 6.14.0 release 6)
TS 129 061: September 2006
(Version 6.9.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Interworking between the
public land mobile network (PLMN)
supporting packet based services
and packet data networks (PDN)
(3GPP TS 29.061 version 6.9.0
release 6)
TS 129 163: September 2006
(Version 6.10.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Interworking between the
IP multimedia (IM) core network
(CN) subsystem and circuit
switched (CS) networks (3GPP TS
29.163 version 6.10.0 release 6)
TS 129 163: September 2006
(Version 7.4.0)
(3GPP TS 29.163 version 7.4.0
release 7)
TS 129 198:-
Universal mobile
telecommunications system
(UMTS). Open service access
(OSA) application programming
interface (API)
TS 129 198-1: July 2006
(Version 6.4.1)
Overview (3GPP TS 29.198-01
version 6.4.1 release 6)
TS 129 198-2: July 2006
(Version 6.5.1)
Common data definitions (3GPP
TS 29.198-02 version 6.5.1 release
6)
Page 65 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 129 198-3: July 2006
(Version 6.6.1)
Framework (3GPP TS 29.198-03
version 6.6.1 release 6)
TS 129 198-4:-
Call control
TS 129 198-4-1: July 2006
(Version 6.5.1)
Call control common definitions
(3GPP TS 29.198-04-1 version
6.5.1 release 6)
TS 129 198-4-2: July 2006
(Version 6.4.1)
Generic call control service
capability feature (SCF) (3GPP TS
29.198-04-2 version 6.4.1 release
6)
TS 129 198-4-3: July 2006
(Version 6.6.1)
Multi-party call control service
capability feature (SCF) (3GPP TS
29.198-04-3 version 6.6.1 release
6)
TS 129 198-4-4: July 2006
(Version 6.5.1)
Multimedia call control service
capability feature (SCF) (3GPP TS
29.198-04-4 version 6.5.1 release
6)
TS 129 198-5: July 2006
(Version 6.5.1)
User interaction service capability
feature (SCF) (3GPP TS 29.198-05
version 6.5.1 release 6)
TS 129 198-6: July 2006
(Version 6.6.1)
Mobility service capability feature
(SCF) (3GPP TS 29.198-06
version 6.6.1 release 6)
TS 129 198-7: July 2006
(Version 6.4.1)
Terminal capabilities service
capability feature (SCF) (3GPP TS
29.198-07 version 6.4.1 release 6)
TS 129 198-8: July 2006
(Version 6.5.1)
Data session control service
capability feature (SCF) (3GPP TS
29.198-08 version 6.5.1 release 6)
TS 129 198-11: July 2006
(Version 6.5.1)
Account management service
capability feature (SCF) (3GPP TS
29.198-11 version 6.5.1 release 6)
TS 129 198-12: July 2006
(Version 6.5.1)
Charging service capability feature
(SCF) (3GPP TS 29.198-12
version 6.5.1 release 6)
TS 129 198-13: July 2006
(Version 6.4.1)
Policy management service
capability feature (SCF) (3GPP TS
29.198-13 version 6.4.1 release 6)
TS 129 198-14: July 2006
(Version 6.3.1)
Presence and availability
management (PAM) service
capability feature (SCF) (3GPP TS
29.198-14 version 6.3.1 release 6)
TS 129 198-15: July 2006
(Version 6.3.1)
Multi-media messaging (MM)
service capability feature (SCF)
(3GPP TS 29.198-15 version 6.3.1
release 6)
TS 129 209: September 2006
(Version 6.6.0)
Universal mobile
telecommunications system
(UMTS). Policy control over Gq
interface (3GPP TS 29.209 version
6.6.0 release 6)
TS 129 210: September 2006
(Version 6.6.0)
Universal mobile
telecommunications system
(UMTS). Charging rule provisioning
over Gx interface (3GPP TS
29.210 version 6.6.0 release 6)
TS 129 229: September 2006
(Version 6.9.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Cx and Dx interfaces
based on the diameter protocol.
Protocol details (3GPP TS 29.229
version 6.9.0 release 6)
TS 129 229: September 2006
(Version 7.3.0)
(3GPP TS 29.229 version 7.3.0
release 7)
TS 129 232: September 2006
(Version 4.15.0)
Universal mobile
telecommunications system
(UMTS). Media gateway controller
(MGC) - media gateway (MGW)
interface. Stage 3 (3GPP TS
29.232 version 4.15.0 release 4)
TS 129 232: September 2006
(Version 5.16.0)
(3GPP TS 29.232 version 5.16.0
release 5)
TS 129 232: September 2006
(Version 6.7.0)
(3GPP TS 29.232 version 6.7.0
release 6)
Page 66 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 129 234: September 2006
(Version 6.8.0)
Universal mobile
telecommunications system
(UMTS). 3GPP system to wireless
local area network (WLAN)
interworking. Stage 3 (3GPP TS
29.234 version 6.8.0 release 6)
TS 129 234: September 2006
(Version 7.3.0)
(3GPP TS 29.234 version 7.3.0
release 7)
TS 129 328: September 2006
(Version 5.14.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). IP multimedia subsystem
(IMS) Sh interface. Signalling flows
and message contents (3GPP TS
29.328 version 5.14.0 release 5)
TS 129 328: September 2006
(Version 6.11.0)
(3GPP TS 29.328 version 6.11.0
release 6)
TS 129 329: September 2006
(Version 6.7.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Sh interface based on the
diameter protocol. Protocol details
(3GPP TS 29.329 version 6.7.0
release 6)
TS 129 332: September 2006
(Version 6.7.0)
Universal mobile
telecommunications system
(UMTS). Media gateway control
function (MGCF) - IM media
gateway (IM-MGW). Mn interface
(3GPP TS 29.332 version 6.7.0
release 6)
TS 131 102: September 2006
(Version 6.15.0)
Universal mobile
telecommunications system
(UMTS). Characteristics of the
universal subscriber identity
module (USIM) application (3GPP
TS 31.102 version 6.15.0 release
6)
TS 131 102: September 2006
(Version 7.6.0)
(3GPP TS 31.102 version 7.6.0
release 7)
TS 131 103: September 2006
(Version 6.11.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Characteristics of the IP
multimedia services identity
module (ISIM) application (3GPP
TS 31.103 version 6.11.0 release
6)
TS 131 111: September 2006
(Version 6.9.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Universal subscriber
identity module (USIM) application
toolkit (USAT) (3GPP TS 31.111
version 6.9.0 release 6)
TS 131 111: September 2006
(Version 7.5.0)
(3GPP TS 31.111 version 7.5.0
release 7)
TS 131 121: May 2006
(Version 6.4.0)
Universal mobile
telecommunications system
(UMTS). UICC-terminal interface.
Universal subscriber identity
module (USIM) application test
specification (3GPP TS 31.121
version 6.4.0 release 6)
TS 131 121: September 2006
(Version 6.5.0)
(3GPP TS 31.121 version 6.5.0
release 6)
TS 131 122: September 2006
(Version 6.2.0)
Universal mobile
telecommunications system
(UMTS). Universal subscriber
identity module (USIM)
conformance test specification
(3GPP TS 31.122 version 6.2.0
release 6)
TS 131 124: September 2006
(Version 6.6.0)
Universal mobile
telecommunications system
(UMTS). Mobile equipment (ME)
conformance test specification.
Universal subscriber interface
module application toolkit (USAT)
conformance test specification
(3GPP TS 31.124 version 6.6.0
release 6)
TS 132 111:-
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Telecommunication
management. Fault management
Page 67 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 132 111-2: September 2006
(Version 5.9.0)
Alarm integration reference point
(IRP): information service (IS)
(3GPP TS 32.111-2 version 5.9.0
release 5)
TS 132 111-2: September 2006
(Version 6.9.0)
(3GPP TS 32.111-2 version 6.9.0
release 6)
TS 132 151: September 2006
(Version 6.3.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Telecommunication
management. Integration reference
point (IRP) information service (IS)
template (3GPP TS 32.151 version
6.3.0 release 6)
TS 132 240: September 2006
(Version 6.4.0)
Universal mobile
telecommunications system
(UMTS). Telecommunication
management. Charging
management. Charging
architecture and principles (3GPP
TS 32.240 version 6.4.0 release 6)
TS 132 251: September 2006
(Version 6.8.0)
Universal mobile
telecommunications system
(UMTS). Telecommunication
management. Charging
management. Packet switched
(PS) domain charging (3GPP TS
32.251 version 6.8.0 release 6)
TS 132 272: September 2006
(Version 6.5.0)
Universal mobile
telecommunications system
(UMTS). Telecommunication
management. Charging
management. Push-to-talk over
cellular (PoC) charging (3GPP TS
32.272 version 6.5.0 release 6)
TS 132 273: September 2006
(Version 6.5.0)
Universal mobile
telecommunications system
(UMTS). Telecommunication
management. Charging
management. Multimedia
broadcast and multicast service
(MBMS) charging (3GPP TS
32.273 version 6.5.0 release 6)
TS 132 297: September 2006
(Version 6.2.0)
Universal mobile
telecommunications system
(UMTS). Telecommunication
management. Charging
management. Charging data
record (CDR) file format and
transfer (3GPP TS 32.297 version
6.2.0 release 6)
TS 132 298: September 2006
(Version 6.5.0)
Universal mobile
telecommunications system
(UMTS). Telecommunication
management. Charging
management. Charging data
record (CDR) parameter
description (3GPP TS 32.298
version 6.5.0 release 6)
TS 132 313: September 2006
(Version 6.3.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Telecommunication
management. Generic integration
reference point (IRP) management.
Common object request broker
architecture (CORBA) solution set
(SS) (3GPP TS 32.313 version
6.3.0 release 6)
TS 132 341: September 2006
(Version 6.2.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Telecommunication
management. File transfer (FT)
integration reference point (IRP):
requirements (3GPP TS 32.341
version 6.2.0 release 6)
TS 132 371: September 2006
(Version 6.2.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Telecommunication
management. Security
management concept and
requirements (3GPP TS 32.371
version 6.2.0 release 6)
TS 133 203: September 2006
(Version 5.11.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). 3G security. Access
security for IP-based services
(3GPP TS 33.203 version 5.11.0
release 5)
TS 133 203: September 2006
(Version 6.10.0)
(3GPP TS 33.203 version 6.10.0
release 6)
Page 68 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 133 203: September 2006
(Version 7.3.0)
(3GPP TS 33.203 version 7.3.0
release 7)
TS 133 210: September 2006
(Version 6.6.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). 3G security. Network
domain security (NDS). IP network
layer security (3GPP TS 33.210
version 6.6.0 release 6)
TS 133 210: September 2006
(Version 7.1.0)
(3GPP TS 33.210 version 7.1.0
release 7)
TS 133 220: September 2006
(Version 6.10.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Generic authentication
architecture (GAA). Generic
bootstrapping architecture (3GPP
TS 33.220 version 6.10.0 release
6)
TS 133 220: September 2006
(Version 7.5.0)
(3GPP TS 33.220 version 7.5.0
release 7)
TS 133 222: March 2006
(Version 7.1.0)
Universal mobile
telecommunications system
(UMTS). Generic authentication
architecture (GAA). Access to
network application functions using
hypertext transfer protocol over
transport layer security (HTTPS)
(3GPP TS 33.222 version 7.1.0
release 7)
TS 133 222: September 2006
(Version 7.2.0)
(3GPP TS 33.222 version 7.2.0
release 7)
TS 133 246: September 2006
(Version 6.8.0)
Universal mobile
telecommunications system
(UMTS). 3G security. Security of
multimedia broadcast/multicast
service (MBMS) (3GPP TS 33.246
version 6.8.0 release 6)
TS 133 310: September 2006
(Version 7.1.0)
Universal mobile
telecommunications system
(UMTS). Network domain security.
Authentication framework
(NDS/AF) (3GPP TS 33.310
version 7.1.0 release 7)
TS 134 123:-
Universal mobile
telecommunications system
(UMTS). User equipment (UE)
conformance specification
TS 134 123-3: October 2006
(Version 5.6.0)
Abstract test suites (ATSs) (3GPP
TS 34.123-3 version 5.6.0 release
5)
TS 134 123-3: October 2006
(Version 6.0.0)
(3GPP TS 34.123-3 version 6.0.0
release 6)
TS 143 055: June 2006
(Version 6.13.0)
Digital cellular telecommunications
system (phase 2+). Dual transfer
mode (DTM). Stage 2 (3GPP TS
43.055 version 6.13.0 release 6)
TS 143 055: September 2006
(Version 6.14.0)
(3GPP TS 43.055 version 6.14.0
release 6)
TS 143 064: June 2006
(Version 6.11.0)
Digital cellular telecommunications
system (phase 2+). General packet
radio service (GPRS). Overall
description of the GPRS radio
interface. Stage 2 (3GPP TS
43.064 version 6.11.0 release 6)
TS 143 069: September 2006
(Version 6.4.0)
Digital cellular telecommunications
system (phase 2+). Voice
broadcast service (VBS). Stage 2
(3GPP TS 43.069 version 6.4.0
release 6)
TS 143 129: June 2006
(Version 6.8.0)
Digital cellular telecommunications
system (phase 2+).
Packed-switched handover for
GERAN A/Gb mode. Stage 2
(3GPP TS 43.129 version 6.8.0
release 6)
TS 143 129: September 2006
(Version 6.9.0)
(3GPP TS 43.129 version 6.9.0
release 6)
TS 143 246: June 2006
(Version 6.8.0)
Digital cellular telecommunications
system (phase 2+). Multimedia
broadcast/multicast service
(MBMS) in the GERAN. Stage 2
(3GPP TS 43.246 version 6.8.0
release 6)
TS 143 246: September 2006
(Version 6.9.0)
(3GPP TS 43.246 version 6.9.0
release 6)
Page 69 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 143 318: June 2006
(Version 6.7.0)
Digital cellular telecommunications
system (phase 2+). Generic
access to the A/Gb interface.
Stage 2 (3GPP TS 43.318 version
6.7.0 release 6)
TS 144 018: July 2006
(Version 6.18.0)
Digital cellular telecommunications
system (phase 2+). Mobile radio
interface layer 3 specification.
Radio resource control (RRC)
protocol (3GPP TS 44.018 version
6.18.0 release 6)
TS 144 018: September 2006
(Version 6.19.0)
(3GPP TS 44.018 version 6.19.0
release 6)
TS 144 060: July 2006
(Version 6.18.0)
Digital cellular telecommunications
system (phase 2+). General packet
radio service (GPRS). Mobile
station (MS) - base station system
(BSS) interface. Radio link control /
medium access control
(RLC/MAC) protocol (3GPP TS
44.060 version 6.18.0 release 6)
TS 144 060: September 2006
(Version 6.19.0)
(3GPP TS 44.060 version 6.19.0
release 6)
TS 144 318: July 2006
(Version 6.6.0)
Digital cellular telecommunications
system (phase 2+). Generic
access (GA) to the A/Gb interface.
Mobile GA interface layer 3
specification (3GPP TS 44.318
version 6.6.0 release 6)
TS 145 008: June 2006
(Version 6.17.0)
Digital cellular telecommunications
system (phase 2+). Radio
subsystem link control (3GPP TS
45.008 version 6.17.0 release 6)
TS 145 008: September 2006
(Version 6.18.0)
(3GPP TS 45.008 version 6.18.0
release 6)
TS 148 018: July 2006
(Version 6.14.0)
Digital cellular telecommunications
system (phase 2+). General packet
radio service (GPRS). Base station
system (BSS) - serving GPRS
support node (SGSN). BSS GPRS
protocol (BSSGP) (3GPP TS
48.018 version 6.14.0 release 6)
TS 148 018: September 2006
(Version 6.15.0)
(3GPP TS 48.018 version 6.15.0
release 6)
TS 151 010:-
Digital cellular telecommunications
system (phase 2+). Mobile station
(MS) conformance specification
TS 151 010-1: July 2006
(Version 7.2.0)
Conformance specification (3GPP
TS 51.010-1 version 7.2.0 release
7)
TS 151 010-1: October 2006
(Version 7.3.1)
(3GPP TS 51.010-1 version 7.3.1
release 7)
TS 151 010-2: July 2006
(Version 7.2.0)
Protocol implementation
conformance statement (PICS)
proforma specification (3GPP TS
51.010-2 version 7.2.0 release 7)
TS 151 010-2: September 2006
(Version 7.3.0)
(3GPP TS 51.010-2 version 7.3.0
release 7)
TS 151 010-4: September 2006
(Version 4.2.0)
SIM application toolkit
conformance specification (3GPP
TS 51.010-4 version 4.2.0 release
4)
TS 151 010-5: September 2006
(Version 7.3.0)
Inter-radio-access-technology
(RAT) (GERAN / UTRAN)
interaction abstract test suite (ATS)
(3GPP TS 51.010-5 version 7.3.0
release 7)
TS 182 009: October 2006
(Version 1.1.1)
Telecommunications and internet
converged services and protocols
for advanced networking
(TISPAN). NGN architecture to
support emergency communication
from citizen to authority [endorsed
document 3GPP TS 23.167,
release 7]
TS 184 002: October 2006
(Version 1.1.1)
Telecommunications and internet
converged services and protocols
for advanced networking
(TISPAN). Identifiers (IDs) for NGN
Page 70 of 81OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 186 005:-
Telecommunications and internet
converged services and protocols
for advanced networking
(TISPAN). Terminating
identification presentation (TIP)
and terminating identification
restriction (TIR)
TS 186 005-1: October 2006
(Version 1.1.1)
Protocol implementation
conformance statement (PICS)
TS 186 006:-
Telecommunications and internet
converged services and protocols
for advanced networking
(TISPAN). Originating identification
presentation (OIP) and originating
identification restriction (OIR)
TS 186 006-1: October 2006
(Version 1.1.1)
Protocol implementation
conformance statement (PICS)
TS 186 007:-
Telecommunications and internet
converged services and protocols
for advanced networking
(TISPAN). Communication HOLD
(CH)
TS 186 007-1: October 2006
(Version 1.1.1)
Protocol implementation
conformance statement (PICS)
ETSI DOCUMENTS ISSUED
FOR ONE STEP APPROVAL
PROCEDURE (OAP)EN 300 392:-
Terrestrial trunked radio (TETRA).
Voice plus data (V+D)
EN 301 929:-
Electromagnetic compatibility and
radio spectrum matters (ERM).
VHF transmitters and receivers as
coast stations for GMDSS and
other applications in the maritime
mobile service
The following ETSI documents are
issued under the . Comments are
welcome and should be addressed to
the named contact to arrive by 27
October 2006.EN 300 392-7: June 2006
(Version 2.3.1)
Security
Contact: Nicolas Woollard
Email:
[email protected]£20.00
TCT/TTR
The following ETSI documents are
issued under the One-Step Approval
OP20070209. Comments are welcome
and should be addressed to the
named contact to arrive by 05
January 2007.EN 301 929-1: October 2006
(Version 1.2.1)
Technical characteristics and
methods of measurement
Contact: Martin Hart
Email: [email protected]
£20.00
TCT/ERM/26
EN 301 929-2: October 2006
(Version 1.2.1)
Harmonized EN under article 3.2 of
the R&TTE directive
Contact: Martin Hart
Email: [email protected]
£20.00
TCT/ERM/26
DRAFT ETSI STANDARDS
FOR PUBLIC COMMENT
The following ETSI documents are
issued under the Public Enquiry
PE20070302. Comments are welcome
and should be addressed to the
named contact to arrive by 26
January 2007.EN 301 459: October 2006
(Version 1.3.3)
Satellite earth stations and
systems (SES). Harmonized EN
for satellite interactive terminals
(SIT) and satellite user terminals
(SUT) transmitting towards
satellites in geostationary orbit in
the 29,5 GHz to 30,0 GHz
frequency bands covering
essential requirements under
article 3.2 of the R&TTE directive
Contact: John Rogers
Email: [email protected]
£20.00
TCT/SES
IEC PUBLICATIONS
IEC 60034:-
Rotating electrical machines
IEC 60034-18-41:2006
Qualification and type tests for type
I electrical insulation systems used
in rotating electrical machines fed
from voltage converters
£92.80 members, £96.67
non-membersPEL/2
IEC 60335:-
Household and similar electrical
appliances. Safety
IEC 60335-2:-
Particular requirements
IEC 60335-2-25:-
Microwave ovens
AMENDMENT 2:June 2006
£14.40 members, £15.00
non-membersCPL/61/07
Page 71 of 81IEC PUBLICATIONS
IEC 60335-2-103:2006
(Edition 2)
Drives for gates, doors and
windows
£84.80 members, £88.33
non-membersCPL/61/01
IEC 60669:-
Switches for household and similar
fixed-electrical installations
IEC 60669-1:-
General requirements
AMENDMENT 2:October 2006
£20.80 members, £21.67
non-membersPEL/23
IEC 60730:-
Automatic electrical controls for
household and similar use
IEC 60730-2:-
Particular requirements
IEC 60730-2-3:2006
(Edition 2)
Thermal protectors for ballasts for
tubular fluorescent lamps
£46.40 members, £48.33
non-membersCPL/72
IEC 60730-2-4:2006
(Edition 2)
Thermal motor protectors for
motor-compressors or hermetic
and semi-hermetic type
£68.80 members, £71.67
non-membersCPL/72
IEC 60730-2-10:2006
(Edition 2)
Motor-starting relays
£38.40 members, £40.00
non-membersCPL/72
IEC 60730-2-11:2006
(Edition 2)
Energy regulators
£41.60 members, £43.33
non-membersCPL/72
IEC 60730-2-13:2006
(Edition 2)
Humidity sensing controls
£46.40 members, £48.33
non-membersCPL/72
IEC 60884:-
Plugs and socket-outlets for
household and similar purposes
IEC 60884-2:-
Particular requirements
IEC 60884-2-1:2006
(Edition 2)
Fused plugs
£32.00 members, £33.33
non-membersPEL/23
IEC 60884-2-2:2006
(Edition 2)
Socket-outlets for appliances
£38.40 members, £40.00
non-membersPEL/23
IEC 60884-2-3:2006
(Edition 2)
Switched socket-outlets without
interlock for fixed installations
£46.40 members, £48.33
non-membersPEL/23
IEC 60947:-
Low-voltage switchgear and
controlgear
IEC 60947-4-3:-
Contactors and motor-starters.
A.C. semiconductor controllers and
contactors for non-motor loads
AMENDMENT 1:October 2006
£84.80 members, £88.33
non-membersPEL/17/2
IEC 60947-5-8:2006
Control circuit devices and
switching elements. Three-position
enabling switches
£68.80 members, £71.67
non-membersPEL/17/2
IEC 60974:-
Arc welding equipment
IEC 60974-4:2006
In-service inspection and testing
£46.40 members, £48.33
non-membersWEE/6
IEC 61133:2006
(Edition 2)
Railway applications. Rolling stock.
Testing of rolling stock on
completion of construction and
before entry into service
£155.20 members, £161.67
non-membersGEL/9/2
IEC 61274:-
Adaptors for fibre optic connectors
IEC 61274-1-1:2006
(Edition 2)
Thermistors. Directly heated
positive temperature coefficient
£41.60 members, £43.33
non-membersGEL/86/2
IEC 61400:-
Wind turbine generator systems
Page 72 of 81IEC PUBLICATIONS
IEC 61400-11:-
Acoustic noise measurement
techniques
AMENDMENT 1:May 2006
£19.20 members, £20.00
non-membersPEL/88
IEC 61537:2006
(Edition 2)
Cable management. Cable tray
systems and cable ladder systems
£168.00 members, £175.00
non-membersPEL/213
IEC 62275:2006
Cable management systems.
Cable ties for electrical installations
£84.80 members, £88.33
non-membersPEL/213
ISO PUBLICATIONS
ISO 230:-
Test code for machine tools
ISO 230-7:2006
Geometric accuracy of axes of
rotation
£116.80 members, £121.67
non-membersMTE/1
ISO 389:-
Acoustics. Reference zero for the
calibration of audiometric
equipment
ISO 389-5:2006
Reference equivalent threshold
sound pressure levels for pure
tones in the frequency range 8 kHz
to 16 kHz
£35.20 members, £36.67
non-membersEH/1/1
ISO 517:-
Photography. Apertures and
related properties pertaining to
photographic lenses. Designations
and measurements
CORRIGENDUM 1:October 2006
CPW/172/1
ISO 734:-
Oilseed meals. Determination of oil
content
ISO 734-1:2006
(Edition 2)
Extraction method with hexane (or
light petroleum)
£40.00 members, £41.67
non-membersAW/307
ISO 1219:-
Fluid power systems and
components. Graphic symbols and
circuit diagrams
ISO 1219-1:2006
(Edition 2)
Graphic symbols for conventional
use and data-processing
applications
£160.00 members, £166.67
non-membersMCE/18/-/1
ISO 1269:2006
(Edition 3)
Plastics. Homopolymer and
copolymer resins of vinyl chloride.
Determination of volatile matter
(including water)
£30.40 members, £31.67
non-membersPRI/82
ISO 1496:-
Series 1 freight containers.
Specification and testing
ISO 1496-1:-
General cargo containers for
general purposes
AMENDMENT 4:November 2006
£12.80 members, £13.33
non-membersTW/1
ISO 1805:2006
(Edition 2)
Fishing nets. Determination of
breaking force and knot breaking
force of netting yarns
£35.20 members, £36.67
non-membersTCI/77
ISO 2705:2006
(Edition 6)
Road vehicles. M12 x 1,25
spark-plugs with flat seating and
their cylinder head housings
£35.20 members, £36.67
non-membersMCE/9
ISO 2739:2006
(Edition 2)
Sintered metal bushes.
Determination of radial crushing
strength
£30.40 members, £31.67
non-membersISE/65
ISO 2782:2006
(Edition 3)
Rubber, vulcanized or
thermoplastic. Determination of
permeability to gases
£56.00 members, £58.33
non-membersPRI/22
ISO 2846:-
Graphic technology. Colour and
transparency of ink sets for
four-colour printing
Page 73 of 81ISO PUBLICATIONS
ISO 2846-1:2006
(Edition 2)
Sheet-fed and heat-set web offset
lithographic printing
£60.80 members, £63.33
non-membersPAI/43
ISO 3008:2006
(Edition 2)
Fire resistance tests. Door and
shutter assemblies
£104.00 members, £108.33
non-membersFSH/22
ISO 3369:2006
(Edition 2)
Impermeable sintered metal
materials and hardmetals.
Determination of density
£30.40 members, £31.67
non-membersISE/65
ISO 4126:-
Safety devices for protection
against excessive pressure
ISO 4126-7:-
Common data
CORRIGENDUM 1:November 2006
PVE/12
ISO 4190:-
Lift (elevator) installation
ISO 4190-5:2006
(Edition 3)
Control devices, signals and
additional fittings
£68.80 members, £71.67
non-membersMHE/4
ISO 4664:-
Rubber, vulcanized or
thermoplastic. Determination of
dynamic properties
ISO 4664-2:2006
Torsion pendulum methods at low
frequencies
£51.20 members, £53.33
non-membersPRI/22
ISO/TS 4869:-
Acoustics. Hearing protectors
ISO/TS 4869-5:2006
Method for estimation of noise
reduction using fitting by
inexperienced test subjects
£64.00 members, £66.67
non-members
EH/1/1
ISO 4926:2006
(Edition 2)
Road vehicles. Hydraulic braking
systems. Non-petroleum-base
reference fluids
£25.60 members, £26.67
non-membersPRI/69
ISO 5006:2006
Earth-moving machinery.
Operator's field of view. Test
method and performance criteria
£73.60 members, £76.67
non-membersB/513/1
ISO 5145:-
Cylinder valve outlets for gases
and gas mixtures . Selection and
dimensioning
AMENDMENT 1:July 2006
£12.80 members, £13.33
non-membersPVE/3/1
ISO 5247:-
Textile machinery and accessories.
Weaving machines
ISO 5247-1:-
Vocabulary and classification
CORRIGENDUM 1:November 2006
TCI/33
ISO 5360:2006
(Edition 2)
Anaesthetic vaporizers.
Agent-specific filling systems
£73.60 members, £76.67
non-membersCH/121/1
ISO/TS 5658:-
Reaction to fire tests. Spread of
flame
ISO/TS 5658-1:2006
Guidance on flame spread
£81.60 members, £85.00
non-membersFSH/21
ISO 5700:2006
(Edition 4)
Tractors for agriculture and
forestry. Roll-over protective
structures. Static test method and
acceptance conditions
£81.60 members, £85.00
non-membersAGE/6
ISO 6101:-
Rubber. Determination of metal
content by atomic absorption
spectrometry
ISO 6101-5:2006
(Edition 2)
Determination of iron content
£35.20 members, £36.67
non-membersPRI/23
Page 74 of 81ISO PUBLICATIONS
ISO/TS 6733:2006
Milk and milk products.
Determination of lead content.
Graphite furnace atomic absorption
spectrometric method
£56.00 members, £58.33
non-membersAW/5
ISO 7540:2006
(Edition 2)
Ground paprika (Capsicum annum
L.). Specification
£51.20 members, £53.33
non-membersAW/7
ISO/IEC 7812:-
Identification cards. Identification of
issuers
ISO/IEC 7812-1:2006
(Edition 3)
Numbering system
£40.00 members, £41.67
non-membersIST/17
ISO/IEC 7816:-
Identification cards. Integrated
circuit cards
ISO/IEC 7816-3:2006
(Edition 3)
Cards with contacts. Electrical
interface and transmission
protocols
£104.00 members, £108.33
non-membersIST/17
ISO 8061:-
Alpine ski-bindings. Selection of
release torque values
AMENDMENT 1:November 2006
£12.80 members, £13.33
non-membersSW/136
ISO 8308:2006
(Edition 3)
Rubber and plastics hoses and
tubing. Determination of
transmission of liquids through
hose and tubing walls
£40.00 members, £41.67
non-membersPRI/66
ISO 8332:2006
(Edition 3)
Rubber compounding ingredients.
Sulfur. Methods of test
£76.80 members, £80.00
non-membersPRI/23
ISO 8422:2006
(Edition 2)
Sequential sampling plans for
inspection by attributes
£86.40 members, £90.00
non-membersSS/5
ISO 8470:2006
(Edition 3)
Road vehicles. M14 x 1,25
spark-plugs with flat seating and 16
mm hexagon and their cylinder
head housings
£40.00 members, £41.67
non-membersMCE/9
ISO 8644:2006
(Edition 2)
Motorcycles. Light-alloy wheels.
Test method
£51.20 members, £53.33
non-membersAUE/14
ISO 8913:2006
(Edition 3)
Aerospace series. Lightweight
polytretrafluoroethylene (PTFE)
hose assemblies, classification
400$0DF/3 000 psi, 204$0DC/21
000 kPa (400$0DF/3 046 psi).
Procurement
£81.60 members, £85.00
non-membersACE/69
ISO 8995:-
Lighting of work places
ISO 8995-3:2006
Lighting requirements for safety
and security of outdoor work
places
£35.20 members, £36.67
non-membersCPL/34/10
ISO 9712:-
Non-destructive testing.
Qualification and certification of
personnel
CORRIGENDUM 1:November 2006
WEE/46
ISO 9911:2006
(Edition 2)
Agricultural irrigation equipment.
Manually operated small plastics
valves
£51.20 members, £53.33
non-membersAGE/30
ISO 10972:-
Cranes. Requirements for
mechanisms
ISO 10972-5:2006
Bridge and gantry cranes
£30.40 members, £31.67
non-membersMHE/3/3
Page 75 of 81ISO PUBLICATIONS
ISO 11088:2006
(Edition 4)
Assembly, adjustment and
inspection of an alpine
ski/binding/boot (S-B-B) system
£60.80 members, £63.33
non-membersSW/136
ISO 11193:-
Single-use medical examination
gloves
ISO 11193-2:2006
Specification for gloves made from
poly(vinyl chloride)
£46.40 members, £48.33
non-membersCH/205/3
ISO 11890:-
Paints and varnishes.
Determination of volatile organic
compound (VOC) content
ISO 11890-2:2006
(Edition 2)
Gas-chromatographic method
£60.80 members, £63.33
non-membersSTI/10
ISO 12052:2006
Health informatics. Digital imaging
and communication in medicine
(DICOM) including workflow and
data management
£51.20 members, £53.33
non-membersIST/35
ISO 12082:2006
(Edition 2)
Processed cheese and processed
cheese products. Calculation of the
content of added citrate
emulsifying agents and acidifers /
pH-controlling agents, expressed
as citric acid
£25.60 members, £26.67
non-membersAW/5
ISO/IEC 13249:-
Information technology. Database
languages. SQL multimedia and
application packages
ISO/IEC 13249-6:2006
(Edition 2)
Data mining
£198.40 members, £206.67
non-membersIST/40
ISO 13322:-
Particle size analysis. Image
analysis methods
ISO 13322-2:2006
Dynamic image analysis methods
£76.80 members, £80.00
non-membersLBI/37
ISO 13347:-
Industrial fans. Determination of
fan sound power levels under
standardized laboratory conditions
ISO 13347-1:-
General overview
CORRIGENDUM 1:October 2006
MCE/17
ISO 13347-2:-
Reverberant room method
CORRIGENDUM 1:October 2006
MCE/17
ISO 13347-3:-
Enveloping surface methods
CORRIGENDUM 1:November 2006
MCE/17
ISO 13503:-
Petroleum and natural gas
industries. Completion fluids and
materials
ISO 13503-2:2006
Measurement properties of
proppants used in hydraulic
fracturing and gravel-packing
operations
£81.60 members, £85.00
non-membersPSE/17/-/3
ISO 13584:-
Industrial automation systems and
integration. Parts library
ISO 13584-102:2006
View exchange protocol by ISO
10303 conforming specification
£76.80 members, £80.00
non-membersAMT/4
ISO 13705:2006
(Edition 2)
Petroleum, petrochemical and
natural gas industries. Fired
heaters for general refinery service
£185.60 members, £193.33
non-membersPSE/17/-/6
ISO 13850:2006
(Edition 2)
Safety of machinery. Emergency
stop. Principles for design
£35.20 members, £36.67
non-membersGEL/44
Page 76 of 81ISO PUBLICATIONS
ISO 13985:2006
Liquid hydrogen. Land vehicle fuel
tanks
£64.00 members, £66.67
non-membersPVE/3
ISO 14317:2006
Sintered metal materials excluding
hardmetals. Determination of
compressive yield strength
£30.40 members, £31.67
non-membersISE/65
ISO/IEC 14496:-
Information technology. Coding of
audio-visual objects
ISO/IEC 14496-3:-
Audio
CORRIGENDUM 1:October 2006
IST/37
ISO 14509:-
Small craft. Airborne sound emitted
by powered recreational craft
ISO 14509-2:2006
Sound assessment using
reference craft
£51.20 members, £53.33
non-membersGME/33
ISO 14572:2006
(Edition 2)
Road vehicles. Round, screened
and unscreened, 60V and 600V
multi-core sheathed cables. Test
methods and requirements for
basic and high performance cables
£64.00 members, £66.67
non-membersAUE/16
ISO/IEC 14651:-
Information technology.
International string ordering and
comparison. Method for comparing
character strings and description of
the common template tailorable
ordering
AMENDMENT 2:October 2005
£12.80 members, £13.33
non-membersIST/5
ISO/IEC 14651:-
Information technology.
International string ordering and
comparison. Method for comparing
character strings and description of
the common template tailorable
ordering
AMENDMENT 3:October 2006
£12.80 members, £13.33
non-membersIST/5
ISO/IEC 14776:-
Information technology. Small
computer system interface (SCSI)
ISO/IEC 14776-412:2006
Architecture model. 2 (SAM-2)
£134.40 members, £140.00
non-membersICT/-/1
ISO 15403:-
Natural gas. Natural gas for use as
a compressed fuel for vehicles
ISO 15403-1:2006
Designation of the quality
£76.80 members, £80.00
non-membersPTI/15
ISO 15792:-
Welding consumables. Test
methods
ISO 15792-3:-
Classification testing of positional
capacity and root penetration of
welding consumables in a fillet
weld
CORRIGENDUM 1:November 2006
WEE/39
ISO/IEC 15938:-
Information technology. Multimedia
content description interface
ISO/IEC 15938-4:-
Audio. High-level descriptors
AMENDMENT 2:October 2006
£124.80 members, £130.00
non-membersIST/37
ISO 16111:2006
Transportable gas storage devices.
Hydrogen absorbed in reversible
metal hydride
£73.60 members, £76.67
non-membersPVE/3/3
ISO 16172:2006
Continuous hot-dip metallic-coated
steel sheet for corrugated steel
pipe
£46.40 members, £48.33
non-membersISE/10
ISO 16312:-
Guidance for assessing the validity
of physical fire models for obtaining
fire effluent toxicity data for fire
hazard and risk assessment
ISO 16312-1:2006
Criteria
£51.20 members, £53.33
non-membersFSH/16
Page 77 of 81ISO PUBLICATIONS
ISO/TS 16489:-
Water quality. Guidance for
establishing the equivalency of
results
CORRIGENDUM 1:November 2006
EH/3/2
ISO/TS 16610:-
Geometrical product specification
(GPS). Filtration
ISO/TS 16610-22:2006
Linear profile filters. Spline filters
£60.80 members, £63.33
non-membersTDW/4
ISO/TS 16610-29:2006
Linear profile filters. Spline
wavelets
£64.00 members, £66.67
non-membersTDW/4
ISO/TS 16610-40:2006
Morphological profile filters. Basic
concepts
£60.80 members, £63.33
non-membersTDW/4
ISO/TS 16610-41:2006
Morphological profile filters. Disk
and horizontal line-segment filters
£56.00 members, £58.33
non-membersTDW/4
ISO/TS 16610-49:2006
Morphological profile filters. Scale
space techniques
£64.00 members, £66.67
non-membersTDW/4
ISO 16735:2006
Fire safety engineering.
Requirements governing algebraic
equations. Smoke layers
£76.80 members, £80.00
non-membersFSH/24
ISO/IEC 18046:2006
Information technology. Automatic
identification and data capture
techniques. Radio frequency
identification device performance
test methods
£94.40 members, £98.33
non-membersIST/34
ISO 18274:-
Welding consumables. Wire and
strip electrodes, wires and rods for
fusion welding of nickel and nickel
alloys. Classification
CORRIGENDUM 2:November 2006
WEE/39
ISO 18516:2006
Surface chemical analysis. Auger
electron spectroscopy and X-ray
photoelectron spectroscopy.
Determination of lateral resolution
£76.80 members, £80.00
non-membersCII/60
ISO 18696:2006
Textiles. Determination of
resistance to water absorption.
Tumble-jar absorption method
£35.20 members, £36.67
non-membersTCI/24
ISO/TR 19032:2006
Plastics. Use of polyethylene
reference specimens (PERS) for
monitoring laboratory and outdoor
weathering conditions
£60.80 members, £63.33
non-membersPRI/21
ISO 19108:-
Geographic information. Temporal
schema
CORRIGENDUM :October 2006
IST/36
ISO 19812:2006
Road vehicles. M10 x 1 compact
spark-plugs with flat seating and 16
mm hexagon and their cylinder
head housings
£40.00 members, £41.67
non-membersMCE/9
ISO 19813:2006
Road vehicles. Ignition systems.
Test methods and requirements for
high voltage boots on plug-top coils
and pencil coils
£30.40 members, £31.67
non-membersMCE/9
ISO 19904:-
Petroleum and natural gas
industries. Floating offshore
structures
ISO 19904-1:2006
Monohulls, semi-submersibles and
spars
£160.00 members, £166.67
non-membersB/525/12
ISO/TS 20282:-
Ease of operation of everyday
products
ISO/TS 20282-2:2006
Test method for walk-up-and-use
products
£86.40 members, £90.00
non-membersPH/9
Page 78 of 81ISO PUBLICATIONS
ISO 20301:2006
Health informatics. Health cards.
General characteristics
£51.20 members, £53.33
non-membersIST/35
ISO 20483:2006
Cereals and pulses. Determination
of the nitrogen content and
calculation of the crude protein
content. Kjeldahl method
£56.00 members, £58.33
non-membersAW/4
ISO 20904:2006
Hard coal. Sampling of slurries.
£89.60 members, £93.33
non-membersPTI/16
ISO 21004:2006
Plastics piping systems. Multilayer
pipes and their joints, based on
thermoplastics, for water supply
£76.80 members, £80.00
non-membersPRI/88/2
ISO 21009:-
Cryogenic vessels. Static vacuum
insulated vessels
ISO 21009-2:2006
Operational requirements
£56.00 members, £58.33
non-membersPVE/18
ISO 21012:2006
Cryogenic vessels. Hoses
£56.00 members, £58.33
non-membersPVE/18
ISO 21415:-
Wheat and wheat flour. Gluten
content
ISO 21415-2:2006
Determination of wet gluten by
mechanical means
£68.80 members, £71.67
non-membersAW/4
ISO 21427:-
Water quality. Evaluation of
genotoxicity by measurement of
the induction of micronuclei
ISO 21427-2:2006
Mixed population method using the
cell line V79
£51.20 members, £53.33
non-membersEH/3/5
ISO 21485:2006
Textile machinery. Draw frame for
cotton spinning. Vocabulary and
principles of construction
£46.40 members, £48.33
non-membersTCI/33
ISO 21549:-
Health informatics. Patient
healthcard data
ISO 21549-4:2006
Extended clinical data
£68.80 members, £71.67
non-membersIST/35
ISO/TR 22221:2006
Health informatics. Good principles
and practices for a clinical data
warehouse
£99.20 members, £103.33
non-membersIST/35
ISO 22472:2006
Ships and marine technology.
Guidelines for the operation and
installation of voyage data recorder
(VDR)
£110.40 members, £115.00
non-membersEPL/80
ISO 22778:2006
Metallic coatings. Physical
vapour-deposited coatings of
cadmium on iron and steel.
Specification and test methods
£60.80 members, £63.33
non-membersSTI/33
ISO 22779:2006
Metallic coatings.
Vapour-deposited coatings of
aluminium. Specification and test
methods
£60.80 members, £63.33
non-membersSTI/33
ISO 22896:2006
Road vehicles. Deployment and
sensor bus for occupant safety
systems
£110.40 members, £115.00
non-membersAUE/16
ISO 22902:-
Road vehicles. Automotive
multimedia interface
ISO 22902-1:2006
General technical overview
£81.60 members, £85.00
non-membersAUE/16
ISO 22902-2:2006
Use cases
£160.00 members, £166.67
non-membersAUE/16
Page 79 of 81ISO PUBLICATIONS
ISO 22902-3:2006
System requirements
£35.20 members, £36.67
non-membersAUE/16
ISO 22902-4:2006
Network protocol requirements for
vehicles interface access
£76.80 members, £80.00
non-membersAUE/16
ISO 22902-5:2006
Common message set
£176.00 members, £183.33
non-membersAUE/16
ISO 22902-6:2006
Vehicle interface requirements
£110.40 members, £115.00
non-membersAUE/16
ISO 22902-7:2006
Physical specification
£110.40 members, £115.00
non-membersAUE/16
ISO 23273:-
Fuel cell road vehicles. Safety
specifications
ISO 23273-3:2006
Protection of persons against
electric shock
£51.20 members, £53.33
non-membersPEL/69
ISO 23275:-
Animal and vegetable fats and oils.
Cocoa butter equivalents in cocoa
butter and plain chocolate
ISO 23275-1:2006
Determination of the presence of
cocoa butter equivalents
£51.20 members, £53.33
non-membersAW/307
ISO 23275-2:2006
Quantification of cocoa butter
equivalents
£56.00 members, £58.33
non-membersAW/307
ISO 23874:2006
Natural gas. Gas chromatographic
requirements for hydrocarbon
dewpoint calculation
£76.80 members, £80.00
non-membersPTI/15
ISO 24135:-
Industrial trucks. Specifications and
test methods for operator restraint
systems
ISO 24135-1:2006
Lap-type seat belts
£35.20 members, £36.67
non-membersMHE/7
ISO 24214:2006
Skin barrier adhesives for ostomy
aids. Vocabulary
£30.40 members, £31.67
non-membersCH/173/3
ISO 24346:2006
Resilient floor coverings.
Determination of overall thickness
£35.20 members, £36.67
non-membersPRI/60
ISO/TR 24498:2006
Paper, board and pulps. Estimation
of uncertainty for test methods
£35.20 members, £36.67
non-membersPAI/11
ISO/IEC 24702:2006
Information technology. Generic
cabling. Industrial premises
£124.80 members, £130.00
non-membersTCT/7
ISO/IEC TR 24715:2006
Information technology.
Programming languages, their
environments and system software
interfaces. Technical report on the
conflicts between ISO/IEC9945
(POSIX) and the Linux standard
base (ISO/IEC 23360)
£73.60 members, £76.67
non-membersIST/5
ISO/IEC 24724:2006
Information technology. Automatic
identification and data capture
techniques. Reduced space
symbology (RSS) bar code
symbology specification
£116.80 members, £121.67
non-membersIST/34
ISO TS 26844:2006
Milk and milk products.
Determination of antimicrobial
residues. Tube diffusion test
£56.00 members, £58.33
non-membersAW/5
Page 80 of 81ISO PUBLICATIONS
ISO/IEC 26925:2006
Information technology. Digital
storage media for information
interchange. Data interchange on
120 mm and 80 mm optical disk
using +RW HS format. Capacity:
4,7 and 1,46 Gbytes per side
(recording speed 8X)
£150.40 members, £156.67
non-membersICT/-/1
ISO/PAS PUBLICATIONS
ISO/PAS 28003:2006
Security management systems for
the supply chain. Requirements for
bodies providing audit and
certification of supply chain
security management systems
£99.20 members, £103.33
non-membersSME/32
Page 81 of 81ISO/PAS PUBLICATIONS