torpedo encapsulator sloperiser pump model 40srpflow rates of 24 to 55 gpm (90.8 to 208.2 lpm). •...

manufacturer of sloperiser pumps, control panels & flow meters

To Order Call 1-888-512-1110 35EnvironmentalPumpSolutions.com

EPS submersible pumps are made of stainless steel and fitted with teflon seals and bearings to handle the rigors of contaminated groundwater pumping and continuous operation in landfill/remediation applications. Built to deliver optimum efficiency during periods of high demand, all EPS pumps provide low, long-term operating costs and high operating reliability.

EPS environmental submersibles meet government guidelines for environmental equipment and have been proven through extensive use in the field.

FEATURES• Made For 12" and Larger Wells

Flow rates of 24 to 55 GPM (90.8 to 208.2 LPM).

• State-of-the-art HydraulicsPump efficiency is maximized by constant improvement of the high-performance hydraulic design, and precise manufacturing process.

• Manufactured With High-grade Stainless SteelRugged stainless steel construction inside and out resists corrosionand attack from aggressive liquids.

• Wear-resistant DesignDesigned to flush abrasive particles from the pump, and made fromstainless steel to resist wear caused by abrasives.

• Built-in Check ValvePrevents back-flow into the well once the pump is shut down.

• 1 to 20 HP MotorsStainless steel construction and quality design.

• Motor Controls and ProtectionAvailable controls to protect the motor against burnout anddry-running, plus the ability to monitor the system allowing theuser to optimize settings.

Torpedo Encapsulator Sloperiser Pump Model 40SRP



EPS vertical drawdown pumps are made of stainless steel and fitted with teflon seals and bearings to handle the rigors of contaminated groundwater pumping and continuous operation in landfill/remediation applications. Built to deliver optimum efficiency during periods of high demand, all EPS pumps provide low, long-term operating costs and high operating reliability.

EPS vertical drawdowns meet government guidelines for environmental equipment and have been proven through extensive use in the field.

FEATURES• Made For 10" and Larger Wells

Flow rates of 24 to 55 GPM (90.8 to 208.2 LPM).

• State-of-the-art HydraulicsPump efficiency is maximized by constant improvement of the high-performance hydraulic design, and precise manufacturing process.

• Manufactured With High-grade Stainless SteelRugged stainless steel construction inside and out resists corrosionand attack from aggressive liquids.

• Wear-resistant DesignDesigned to flush abrasive particles from the pump, and made fromstainless steel to resist wear caused by abrasives.

• Built-in Check ValvePrevents back-flow into the well once the pump is shut down.

• 1 to 20 HP MotorsStainless steel construction and quality design.

• Motor Controls and ProtectionAvailable controls to protect the motor against burnout anddry-running, plus the ability to monitor the system allowing theuser to optimize settings.

Vertical Drawdown Pump Model 40VSP

• Special Modifications virtually eliminate air locking



Specifications subject to change without notice.4" motor standard, .5-5 HP/3450 RPM.6" motor standard, 7.5-10 HP/3450 RPM.*Also available with 6" motor.DS = Deep Set model version for high head requirements.Performance conforms to ISO 9906 Annex A @ 10 ft. minimum submergence.

40SRP200-66DS (20 HP)

40SRP200-58DS (20 HP)

40SRP200-50DS (20 HP)

40SRP150-44DS (15 HP)

40SRP150-37DS (15 HP)

40SRP100-30 (10 HP)*

40SRP75-25 (7 1/2 HP)*

40SRP75-21 (7 1/2 HP)*

40SRP50-15 (5 HP)

40SRP50-12 (5 HP)

40SRP30-9 (3 HP)

40SRP20-7 (2 HP)

40SRP15-5 (1 1/2 HP)

40SRP10-3 (1 HP)

Model 40SRPF

FLOW RANGE: 24 - 55 GPM

40 GPM

OUTLET SIZE: 2" NPT

Performance Curves

NOMINAL DIA. 4"

Dustin

Text Box

*Please consult factory for additional models and curves.



DIMENSIONS & WEIGHTS

Model 40SRP 40 GPM Technical Data

Motor Dimensions ApproximateSize Discharge A B C D E Shipping Wt.

Model No. HP In. Size In. In. In. In. In. Lbs.

40SRP10-3 1 4 2" NPT 32.6 11.8 12.8 3.8 6.5 37

40SRP15-5 1½ 4 2" NPT 37.7 13.6 16.1 3.8 6.5 42

40SRP20-7 2 4 2" NPT 42.5 15.1 19.4 3.8 6.5 46

40SRP30-9 3 4 2" NPT 51.3 20.6 22.7 3.8 6.5 70

40SRP50-12 5 4 2" NPT 59.3 23.6 27.7 3.8 6.5 83

40SRP50-15 5 4 2" NPT 64.2 23.6 32.6 3.8 6.5 89

40SRP75-21* 7½ 4 2" NPT 82.6 29.6 45 3.8 6.5 125

40SRP75-25* 7½ 4 2" NPT 89.2 29.6 51.6 3.8 6.5 129

40SRP100-30* 10 4 2" NPT 111.7 43.9 59.8 3.8 6.5 186

40SRP150-37DS 15 6 2" NPT 107.5 28 71.5 5.4 8.5 249

40SPR150-44DS 15 6 2" NPT 119 28 83 5.4 8.5 345

40SRP200-50DS† 20 6 2" MPT 144 30.6 105.4 5.4 8.5 324

40SRP200-58DS† 20 6 2" MPT 157.2 30.6 118.6 5.4 8.5 339

40SRP200-66DS† 20 6 2" MPT 170.4 30.6 131.8 5.4 8.5 399

NOTES: All models suitable for use in 4" (10 cm) wells, unless otherwise noted.Weights include pump end with motor in lbs.*Also available with 6" (15 cm) motor.†Built into sleeve 2" MPT discharge, 6" (15 cm) minimum well diameter.

NOTES: Specifications are subject to change without notice.Vectra® is a registered trademark of Hoechast Calanese Corporation.

COMPONENT CYLINDRICAL SHAFT (3-44 Stgs.) DEEP SET (50-66 Stgs.)Check Valve Housing 304 Stainless Steel Sta3 in0 l4 e ss Steel

304 Stainless Steel304 Stainless SteelCheck Valve304 Stainless Steel304 Stainless SteelDiffuser Chamber304 Stainless Steel304 Stainless SteelImpeller

Suction Interconnector 304 Stainless Steel Sta3 in0 l4 e ss Steel304 Stainless Steel304 Stainless SteelInlet Screen431 Stainless Steel431 Stainless SteelPump Shaft304 Stainless Steel304 Stainless SteelStraps304 Stainless Steel304 Stainless SteelCable Guard304 Stainless Steel304 Stainless SteelPriming Inducer316 Stainless Steel316 Stainless SteelCoupling

Teflon/316 Stainless SteelCheck Valve Seat Teflon/316 Stainless SteelTop Bearing Teflon /316 Stainless SteelImpeller Seal R i n g Teflon /316 Stainless SteelIntermediate B e a r i n g s Teflon /316 Stainless Steel

Teflon/316 Stainless SteelTeflon/316 Stainless SteelTeflon/316 Stainless Steel

Shaft Uthrust Washer Teflon Teflon 304 Stainless Steel304 Stainless SteelSplit Cone304 Stainless Steel304 Stainless SteelSplit Cone Nut316 Stainless SteelNot RequiredSleeve304 Stainless SteelNot RequiredSleeve Flange

MATERIALS OF CONSTRUCTION

A

E

C

B

2”

D

Dustin

Rectangle

Dustin

Rectangle

Dustin

Rectangle

torpedo encapsulator sloperiser pump model 40srpflow rates of 24 to 55 gpm (90.8 to 208.2 lpm). •...

Documents