topic
DESCRIPTION
TOPIC. Failure in Landing Gear of Mirage 5 . TOPIC. Group members. Haroon Ahmed Mirza Muhammad Awais Rana Waqas Ali Khan. CONTENTS. INTRODUCTION MATERIALS PARTS OF LANDING GEAR SHOCK DAMPERS/TORQUE LINKS FAILURE CALCULATION OF FORCES - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/1.jpg)
TOPIC
Failure in Landing Gear of Mirage 5
TOPIC
![Page 2: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/2.jpg)
Group members
Haroon Ahmed Mirza Muhammad Awais Rana Waqas Ali Khan
![Page 3: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/3.jpg)
CONTENTS
INTRODUCTION MATERIALS PARTS OF LANDING GEAR SHOCK DAMPERS/TORQUE LINKS FAILURE CALCULATION OF FORCES ANALYSIS SAFETY ACTIONS
![Page 4: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/4.jpg)
INTRODUCTION OF LANDING GEAR
Purpose :- Main Purpose of landing gear is take off ,taxi and as the name indicates for landing of air craft
![Page 5: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/5.jpg)
INTRODUCTION OF LANDING GEAR
Landing gear is also called under carriage and the type of undercarriage is tricycle under carriage .
In tricycle under carriage there is 1. Nose Wheel Landing Gear.2. Main Landing Gear .
![Page 6: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/6.jpg)
MATERIALS
Materials with high strength to weight ratio are used in landing gears .
Following are the materials used 1. Aluminum alloys 2. Steel alloys3. carbon 4. Titanium
![Page 7: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/7.jpg)
PARTS
Following are the parts of landing gear
1. Shock struts and torque links2. Braces and locks3. Air ground logic4. Brakes5. Temperature indication
![Page 8: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/8.jpg)
SHOCK DAMPERS/ORQUE LINKS
The shock struts/dampers are designed to absorb the forces which are created when the aircraft touches down on the runway. These forces need to be transferred to the aircraft structure.
When the aircraft is taxiing on the ground, the shock struts absorb the shocks created by unevenness in the taxiways.
The shock strut also prevents the aircraft from bouncing up after touchdown.
![Page 9: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/9.jpg)
SHOCK DAMPERS/TORQUE LINKS
Torsional loads are transferred to upper strut by torque links.
Torque link prevent rotation about vertical axis . Maintain wheel alignment.
![Page 10: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/10.jpg)
Picture of shock damper
![Page 11: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/11.jpg)
FAILURE The left main landing gear of air craft begin to
shimmy immediately after touch down Brakes were applied to slow the aircraft in an attempt to control the shimmy, but the oscillations continued until both left main wheels and brake assemblies separated from the axles . Examination revealed that the upper torque link failed within the some yards of feet of the landing roll, and the wheels separated about 1ooo feet from touchdown.
![Page 12: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/12.jpg)
CALCULATION OF FORCES Weight of plane = 7050 kg Landing speed = 290 km/h Angle when plane is landing =4 degrees Vertical speed = sin 4 * 290 km/h =20.22 when the main landing gear will touch the runway it
will create an impulse , as we know that impulse is equal to change in momentum.
Formula = ∑f .∆t=m∆t
① average speed =10.11 km/h
![Page 13: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/13.jpg)
CALCULATION OF FORCES Length of lower strut =1 ftLength of upper strut =1.5 ft
Distance covered by dampers after impulse=0.5ft
Time taken in covering the distance t=o.5/1o.11 = 0.05 s
![Page 14: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/14.jpg)
CALCULATION OF FORCES From equation ① ∑ F *0.049 =7050 * 20.22 ∑ F = 30398934.7 KN After the first impulse torsion will be
generated and formula for calculating it will be
![Page 15: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/15.jpg)
ANALYSIS
The left main gear began to shimmy immediately after touchdown, resulting in failure of the upper torque.
The loose fit of the torque link bushings and pins from the previous overhaul prevented the torque links from controlling and eliminating the shimmy.
The nitrogen pressure in the oleo exceeded the pressure specified in the maintenance manual, and contributing to the oleo’s stiffness.
![Page 16: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/16.jpg)
SAFETY ACTIONS
THRUST REVERSER :- is used to reduce wheel braking energy required
landings and aborted takeoffs . Avoid unnecessary heavy braking during the landing, if possible, to further reduce braking loads.
![Page 17: TOPIC](https://reader035.vdocuments.site/reader035/viewer/2022062310/568164b7550346895dd6c125/html5/thumbnails/17.jpg)
SAFETY ACTIONS
All landing gear will have had the nitrogen pressures rechecked and serviced in strict accordance with the maintenance manual will, to reduce the possibility of increased stiffness from over-serviced oleos.
2. All undercarriages for which the status of the torque links cannot be confirmed as having been overhauled to "new" limits will have the mid-life inspection performed as soon as possible.