SB328 Tonic 2

SBCCSkinny Bitch * Curvy Chick Patterns

SB328-Tonic 2 Sewing Directions:

1Prep the pieces:Layout pattern pieces on your fabric. (*note: pattern is not laid out on paper ready to be cut, you will have to determine the best position for maximum fabric efficiency.

2 3

4

Seam allowances included on pattern :

About this knit pattern:This T-shirt was originally made for a 75% stretch knit. Please refer to knit guide below for how to determine proper knit.

If using a knit that has less stretch, You may want to size up or down depending on the amount of stretch.

It is always recommend to do a trial of fit before sewing in the final fabric.

your knit swatch length

If it stretches to here- you have 75% stretch

This pattern is designed for knit fabric that has 75% stretch. Use the guide below to pick the right knit

neck trim

right side back

right side front

folded edge

With right sides together, join one side of the shoulder

seams. Leave opposite side open.

(serge seam closed if applicable).

Fold the neckline trim in half, wrong sides together. Iron flat.

Starting on the right side of the t-shirt, at the open shoulder seam,join the neckline trim to the neck. Folded edge should be facingthe inside of the body. (Serge the neckline seams if applicable)

3/8”(1cm) for side seams, sleeve cap , shoulder & neckline. 3/4” (1.9cm) hem for sleeve and bottom

Turnback bottom hem and topstitch.Suggesting to baste the hems in place and then use a twin needle to secure all layers.

Finish it up!

*Got questions? email : skinnybcurvyc@gmail.com

pull trim slightlytaut at curve points when

joining to neck

wrong side

right side front

Topstitch

To ensure the neckline trim lays flat, pullthe trim slightly taut around the curveswhen sewing to the body.

Fold the body so right sides aretogether. Close the remainingshoulder seam, including the

neckline trim. (serge closed if applicable)

Turn the seam allowances of the neckline to the inside body.Edgestitch below the seam all

around to hold the seam allowances down.Topstitch the neckline binding to the

back to prevent from poking out of the neck.

Sew the sleeves to the armholes, matchingnotches. Repeat for opposite side. (Sergeseams together if applicable)

Fold the body front toback with right sides

together. Stitch from the sleeve opening

all the way to the bottomhem in one stitch line.

5

6

7

8

9

10

Grab a tape measure....*Measure your chest by wrapping the measuring tape around the fullest part.Make sure that the tape is level all around and does not dip down on your back.

*Measure your waist by wrapping the tape measure around the narrowest part of your torso.

*Measure your hips by wrapping the tape around the fullest part. Make sure the tape is level all around. Generally the hips should be 7 1/2”-8” below the waist.

These measurements are based on BODY measurements. Finished garment measurements are also included below.

Determine what size to choose:

XX-Small X-Small Small Medium LargeChest 30” (76cm) 32” (81cm) 34” (86cm) 36” (91cm) 39” (99cm)Waist 24” (61cm) 26” (66cm) 28” (71cm) 30” (76cm) 33” (84cm)Hip 32” (81cm) 34” (86cm) 36” (91cm) 38” (96cm) 41” (104cm)

Skinny Bitches:

X-Large 1X 2X 3X41” (104cm) 45” (114cm) 49” (124cm) 53” (134cm)36” (92cm) 40” (102cm) 44” (112cm) 48” (122cm)44” (112cm) 48” (122cm) 52” (132cm) 56” (142cm)

ChestWaistHip

Curvy Chicks: