toc analyzer

2
Online Total Carbon Analyzer Factory and mine enterprise Sewage treatment plant FEATURES 1 Online Total Carbon Analyzer Online total organic carbon analyzer adopts the wet oxidation method to totally convert the organic carbon in the sample into CO The generated CO is directly measured by the infrared detector, and 2. 2 then it converts the CO into carbon content. 2 Simple Structure, easy to maintain and upgrade. Suitable for the water quality monitor. APPLICATION Online total organic carbon analyzer adopts the wet oxidation method to totally convert the organic carbon in the sample into CO The generated CO is directly measured by the infrared detector, and then it converts 2. 2 the CO into carbon content. The instruments of this series have simple structure. It connects conveniently. 2 It is easy to maintain and upgrade. It is suitable for the water quality monitor of factory and mine enterprise, sewage treatment plant, semiconductor manufacture, water and environmental monitoring department. The detection rate of the TOC is higher and stable than that of the BOD and COD. TOC is usually be used to evaluate the organic substance pollution degree of the water. INTRODUCTION Semiconductor manufacture Water and environmental monitoring department

Upload: hnl-support-team

Post on 16-Aug-2015

13 views

Category:

Technology


0 download

TRANSCRIPT

Page 1: Toc analyzer

Online Total Carbon Analyzer

Factory and mine enterprise

Sewage treatment plant

FEATURES

11

Online Total Carbon Analyzer

Online total organic carbon analyzer adopts the wet oxidation method to totally convert the organic

carbon in the sample into CO The generated CO is directly measured by the infrared detector, and 2. 2

then it converts the CO into carbon content. 2

Simple Structure, easy to maintain and upgrade.

Suitable for the water quality monitor.

APPLICATION

Online total organic carbon analyzer adopts the wet oxidation method to totally convert the organic carbon

in the sample into CO The generated CO is directly measured by the infrared detector, and then it converts 2. 2

the CO into carbon content. The instruments of this series have simple structure. It connects conveniently. 2

It is easy to maintain and upgrade. It is suitable for the water quality monitor of factory and mine enterprise,

sewage treatment plant, semiconductor manufacture, water and environmental monitoring department.

The detection rate of the TOC is higher and stable than that of the BOD and COD. TOC is usually be used to

evaluate the organic substance pollution degree of the water.

INTRODUCTION

Semiconductor manufacture

Water and environmental monitoring department

Page 2: Toc analyzer

TECHNICAL INFORMATION

Please provide working condition in detail which includes the applied occasions, the measurement

medium, the medium status (temperature, pressure, density, etc.), reaction process and installation

method, etc. Then our sales staff will do the selection for you.

Order Instruction Factory standard configuration. If you have other requirements, please consult with

us when you make an order.

Warranty: One year warranty for the transmitter and jacket. No warranty for the electrochemical

sensor. Artificial damage, charge cost fee.

ORDER INFO

Administrative & Sales Office: 25/N, Laxmi Industrial Estate, New Link Road, Andheri (W), Mumbai - 400 053, India. Tel: +91 22 4295 2180 / 81.Webstie: | Email: www.hnlsystems.com [email protected]

HNL SYSTEMS PVT. LTD.12

Measurement range (It is adjustable according to the order.)

0~50mg.c/L、0~500mg.c/L、0~5000mg.c/L

Repeatability: 3%

Stability: 3%

Response time: 15 min

Water provision:The solid particles are not bigger than 100 μm. The chloride ion content is not more

than 1000ppm. If it is more than 1000ppm, the halide trap accessories must be added. It cannot react

with the phosphoric acid to produce sediments. If it produces sediment, part of the liquid flow

structure should be changed. Please contact our company in time.

Ambient temperature: 2~40 ℃

Relative humidity:RH0~90%

Power supply: AC220V/50Hz 1000W

Output:When the measurement is constant, the display equipment indicates the instantaneous value,

average value/6 min, average value/ hour and average value/day.

Analog voltage<optional>

Alarm signal, allows 220V/1A load

Output 0~10mA <optional> or 4~20mA electric current<optional>

RS232<optional> RS485<optional>

GPRS wireless communication <optional>

Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria

for every product. Due to endee’s commitment to research, design and product improvement, specifications are subject to change without notice.

Gas Monitor, Gas Analyzer, Transmitters, Humidity Moisture Dew Point Analyzer, Dew Point Transmitters, Sampling Systems, UV Flame Detector, Dust Monitor