to download the kino 4 product brief pdf

2
Kino 4 FS1445 Product Brief FSM-0013-1264 Rev 1 WWW.FRONTIER-SILICON.COM KINO4 FS1445 Highly-integrated DAB/DAB+/DMB-R digital radio processor Head Office: 137, Euston Road, London, NW1 2AA, UK Tel: +44 207 391 0620 Fax: +44 207 388 6420 E-mail: [email protected] OVERVIEW Kino 4 is the latest generation of low-power integrated digital radio system-on-chip (SoC). It is a fully integrated single chip radio receiver SoC containing RF tuner, baseband, application processor, audio decode and DAC functionality. Kino 4 has been designed to power all major categories of consumer digital radio device from simple portable digital radios to home audio systems in either a master or slave configuration. Containing a number of innovative technologies to optimise power consumption, Kino 4 uses up to 50% less power than the previous generation Kino 3 chips. The high level of integration such as built-in voltage regulators help to reduce the system component count and keep BoM costs to a minimum as well as reducing manufacturing time. Kino 4 is Digital Tick compliant. The on-chip multi-band RF tuner and processor operate in the following RF bands; LW/MW/SW, FM, DAB-III and DAB-L. SUMMARY OF BENEFITS Enhanced performance and functionality Up to 50% lower power consumption than the previous generation Kino 3 Reduced cost Designed to power all major categories of digital radio device Supports all major digital radio broadcast standards Supports all digital and FM radio frequencies APPLICATIONS DAB/DAB+, FM-RDS, DMB-R Portable radios Clock radios Docks Automotive digital radio adaptors Handheld radios Home audio systems FEATURES CPU 360MHz META MTP RF Sensitivity: DAB -100dBm, FM -110dBm On board RF tuner supporting Band L, Band III, Band II, Band I, including Japanese FM. Internal Stereo DAC with 90dB dynamic range Boot from internal memory, SPI flash memory or host device. Software configurable Flash memory interface Temperature range Operating -40 to +85 °C Storage -40 to +125 °C Full RoHS compliance KINO 4 FULLY INTEGRATED DIGITAL RADIO CHIP 88-pad QFN package 10 x 10 mm, 0.4 mm pitch. Actual size

Upload: lamque

Post on 11-Jan-2017

301 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: to download the Kino 4 product brief PDF

Kino 4 FS1445 Product Brief FSM-0013-1264 Rev 1

WWW.FRONTIER-SILICON.COM

KINO4 FS1445Highly-integrated DAB/DAB+/DMB-R digital radio processor

Head Office: 137, Euston Road, London, NW1 2AA, UK

Tel: +44 207 391 0620 Fax: +44 207 388 6420

E-mail: [email protected]

OVERVIEW Kino 4 is the latest generation of low-power integrated digital radio system-on-chip (SoC). It is a fully integrated single chip radio receiver SoC containing RF tuner, baseband, application processor, audio decode and DAC functionality.

Kino 4 has been designed to power all major categories of consumer digital radio device from simple portable digital radios to home audio systems in either a master or slave configuration.

Containing a number of innovative technologies to optimise power consumption, Kino 4 uses up to 50% less power than the previous generation Kino 3 chips. The high level of integration such as built-in voltage regulators help to reduce the system component count and keep BoM costs to a minimum as well as reducing manufacturing time.

Kino 4 is Digital Tick compliant. The on-chip multi-band RF tuner and processor operate in the following RF bands; LW/MW/SW, FM, DAB-III and DAB-L.

SUMMARY OF BENEFITS � Enhanced performance and functionality

� Up to 50% lower power consumption than the previous generation Kino 3

� Reduced cost

� Designed to power all major categories of digital radio device

� Supports all major digital radio broadcast standards

� Supports all digital and FM radio frequencies

APPLICATIONS

• DAB/DAB+,FM-RDS,DMB-R

• Portableradios

• Clockradios

• Docks

• Automotivedigitalradio

adaptors

• Handheldradios

• Homeaudiosystems

FEATURES• CPU 360MHz META MTP

• RF Sensitivity: DAB -100dBm, FM -110dBm

• On board RF tuner supporting Band L, Band III, Band II, Band I, including Japanese FM.

• Internal Stereo DAC with 90dB dynamic range

• Boot from internal memory, SPI flash memory or host device. Software configurable

• Flash memory interface

• Temperature range

� Operating -40 to +85 °C

� Storage -40 to +125 °C

• Full RoHS compliance

KINO 4 FULLY INTEGRATED

DIGITAL RADIO CHIP

88-pad QFN package 10 x 10 mm, 0.4 mm pitch.

Actual size

Page 2: to download the Kino 4 product brief PDF

Frontier Silicon is a trademark or registered trademark of Frontier Silicon Ltd. META is a registered trademark of Imagination Technologies Ltd.

Kino 4 FS1445 contains IP licensed from Imagination Technologies Ltd

Kino 4 FS1445 Product Brief FSM-0013-1264 Rev 1

KINO 4 FS1445Highly-integrated DAB/DAB+/DMB-R digital radio processor

© 2014 Frontier Silicon Ltd. September 2014

EXTENSIVE INTERFACES

• Multiple configurable GPIO and ADC inputs

• USB 2.0 High-speed in host or device mode

• S/PDIF audio output

• I2S input/output of decoded audio data (both master and slave modes)

• Support for multiple SPI slave devices

• 2 x 16 550-compliant UARTs with optional flow control

• Colour LCD/OLED supported via SPI/I2C or LED indicators for headless display.

• GPIO and ADC interfaces

• JTAG interface for test and emulator support

Kino 4

AudioDAC

RFtuner

GP I/O

META MTPCPU/DSP

Clock

SRAM

LCD

USB 2.0

RF

Keypad/Controls

Dis

play

AnalogueAudio out

Digital Audio in/out

I2S

RF

Keypad

LCD

Kino 4

USB 2.0

Audio output

DisplayMP3FMDAB

AUDIODATA

SIMPLE DAB/MP3 PLAYER APPLICATION

KINO 4 BLOCK DIAGRAM