tmx workholding
DESCRIPTION
Toolmex TMX WorkholdingTRANSCRIPT
The quality of your products depends on the quality of TMX Products
www.toolmex.com
Toolmex has made our Workholding Chucks the choice for Steel and Semi-steel Manual Lathe Chucks. Whether Scroll, Independent, Oil Country, Power, or Collet, these chucks have been replacing the competition without sacrificing quality. When you purchase chucks from Toolmex you can be confident that you are buying the best chucks available on the market with a team of experts that have been trained to deliver uncompromised service.
Features• Designed and Engineered in the USA and Europe• Low carbon for longer life• Steel and Semi-Steel for ultra durability• SET-TRU micro adjustment• Withstands high RPM• Powerful and sure gripping, ultra durable design
for repeatability and trouble free usability• Forged Steel for high speed and an extended period of time• Large selection of direct mount chucks• Manufactured and assembled in the same plant for consistency• Spare parts and Jaws readily available
The chucks are tested at the factory then again in the Toolmex QA Lab and with select customers. You can be assured you are getting the best chucks in the world from Toolmex.
Innovative Workholdingready for production challenges
• High clamping forces with a simple chuck key operation
• Power Clamping Screw Chucks• Clamping forces up to 25 tons per jaw• Self locking in every clamping stage• Solid bodies for higher rigidity on Request
Also Available for your TMX Heavy Duty Chucks
Large Diameter Combination Chuck• Forged Steel body induction hardened• Chuck bodies are fully ground including guide ways• Two-piece jaws according to ASA norms• Steel jaws cement hardened, treated,
and ground on all surfaces• Scroll induction hardened and ground on spiral
and internal diameter
FeaturesHeavy Duty Chuck• European designed and manufactured
• Solid Steel body• Excellent for vertical machining• Chuck sizes according to DIN 6350 norm
• Less friction between jaw and guide• Greater clamping force• Engineered chucks up to 80 inches
Oil Country Chuck • Forged Steel Body• Extra heavy duty American Standard Hard Top
and Master Jaws• Gripping surfaces have fine serrations
for better holding power• Large Thru-hole• Direct “A” Type Mount• Special mounts available on request
TMX Power Chuck and Cylinder Packages
Research, Expertise, and Ingenuity
TMX Power Chuck and Cylinder packages are designed with every detail in mind. TMX engineers review the machine spindle print to ensure that the cylinder mounting adapter, drawtube and chuck adapter are designed to interface with the machine properly and to ensure that maximum performance is achieved.
Using proprietary calculations, TMX engineers can determine the maximum allowable through-hole capacity for any machine and chuck package combination. In many cases, this through-hole capacity is larger than the Original Equipment offered by the machine tool builder ensuring that your TMX Power Chuck and Cylinder solution works each and every time.
All TMX products are backed by a 1 year warranty and come with the peace of mind knowing that workholding engineers have designed and built the system with your goals in mind.
TMX Power Chuck and Cylinder Packages• Engineered specifically for each machine• Power Chuck Packages available up to 63 inches• Optimized chuck and cylinder combination• Chuck upsizing; engineered to work with cylinder• Dynamically balanced draw tube• Maximized through-hole capacities • Proprietary design engineering calculations• Open center and closed center packages
TMX High Pressure Chuck LubricantFor Power and Manual Chucks
2015 S. Mitchell Blvd., Schaumburg, IL 60193 1075 Worcester Street, Natick, MA 01760-1589+1-508-653-8897 • 800-992-4766 • Fax +1-508-653-5110www.toolmex.com
Distributed by
4-999-410 2.5
©2012 Toolmex Corporation, Inc. All rights reserved. All specifications on this sheet are subject to change without notice. Photos shown are a general representation of the various models and may include some optional equipment. Toolmex Industrial Solutions and TMX are registered trademarks of Toolmex Corporation, Inc.
Scan and Explore
• Double to Triple Clamping Pressure• Keeps Work Piece Clamped in Place• Provides Boundary Lubrication Protection• Lowers Friction and Wear• Assists in Wear-in of New Chucks• Lowers Maintenance Costs• High Resistance to Centrifugal Force
TMX Chuck Lubricant is a heavy duty boundary lubricant designed to increase the clamping pressure of Power and Manual chucks. TMX Chuck Lubricant is formulated with a high percentage of molybdenum disulfide to reduce seizing, galling, fretting wear and lower friction under conditions of extreme pressure. Rust and oxidation inhibitors are incorporated to maximize complete rust protection during the life of the lubricant. TMX Chuck Lubricant can be used on the Power Chucks, Standard Chucks, Fasteners, Press Fits and Wear-In Guides and Ways.
Net Wt. 16 oz. (453.6 gms.)