TRAXX RC56 TMTM

TRAXX RC75 TMTM

STABILITY The chassis design provides a low center of gravity and perfect

50/50 weight distribution for maximum stability and maneuverability in challenging terrain.

PERFORMANCE56 HP and 75 HP Hatz diesel engines, which provide up

to 75% more power, result in a market leading power-to-weight ratio, giving the ability to work on steep gradients.

55°SLOPE

CAPACITYIN ANY DIRECTION

Flail HeadsThe TRAXXTMRC can be equipped with multiple size flail heads with a choice of cutting or hammer flails that have the ability to tackle

vegetation up to 1.2” in diameter.

AUTOSTEER TECHNOLOGYOptional GPS Autosteer technology from Trimble allows it to automatically steer to within 1 in. accuracy along its cutting route for huge advances in output and efficiency.

PRECISE CONTROLTwo large joysticks control steering and attachments, while key features such as gearing, rotor speed, speed sensitivity, radiator

self-cleaning and emergency stop can all be accessed at the touch of a button with a 500 ft. operating range.

TRACK OPTIONS Low impact shallow

(40° maximum slope) Aggressive, deep tread rubber cleats

(55° maximum slope) Steel cleats with removable spikes

(55° maximum slope)

Alamo Group (TX) Inc. | 1502 East Walnut Street, Seguin, TX 78155 | 800-882-5762 | www.alamo-industrial.comThis information is intended to be of a general nature only; specifications are subject to change without notice as we continue to improve our products. Warranty: Minimum one year parts and labor.

Non-governmental users are subject to a modified policy. Only genuine Alamo Industrial parts may be used for warranty replacement. © 2019 Alamo Group Inc. Registered trademarks identified are property of Alamo Group Inc. 09/28/2019-JP

1

2

3

1 2 3

51” Flail Head63” Flail Head

75” Flail Head

EngineMakeHorsepowerFuelFuel tank capacityWater-cooled radiatorSelf-cleaning (reversible fan)

HATZ, 3 cylinder, turbo, tier 4 final 56hp (42kw) @ 2,800 rpm

Independent flail head circuitIndependent track drive circuit Independent intercooler Oil tank capacity Attachment lift capacity

TracksRubberRubber with steel cleats Self-tightening

Remote ControlsWorking rangeFrequency Battery Proportional joysticks

TRAXXTMRC56 TRAXXTMRC75HATZ, 4 cylinder, turbo, tier 4 final75hp (56kw) @ 2,800 rpm

Diesel 10 gal.

3 core heavy duty Standard manual and automatic

Closed circuit piston2x closed circuit piston

Standard 5.3 gal (10.6 gal held in system) of biodegradable oil

1,200 lbs

Optional ~ max working angle 40°Standard ~ max working angle 55°

Standard

500 ft458MHz

Interchangeable, rechargeable, two with each unit charge on machine Standard

DimensionsOverall widthOverall length(without attachment)Overall height

Performance

TRAXXTMRC56 TRAXXTMRC7551 in90 in41 in

2,650 lbsDepends on size

WeightTRAXX RCFlail head

2,870 lbsDepends on size

Potentiometer speed control (0 to 100%)

1st gear (low range)Forward and back 0 - 2.2 mph

2nd gear (low range)Forward and back 0 - 4.3 mph

Flail Head AttachmentsRotor speedFront and rear flapsFlails

Rotor widthCutting height range (via roller adjustment)Hydraulic lift

3,300 rpmStandard

Y – Flails for cutting grass and brushJ (hammer) – Flails for cutting brush & sapling

51 in to 75 in.79 in. - 3.35 in. (5 positions)

Flail head can be lifted to cut higher-11.8 in to +15.7 in

Hydraulics