tm - homepage | peak well systems · compressive force of perforating can reduce the permeability...
TRANSCRIPT
FloWellTM
Improving well productivity
through formation damage removal
Simple Safe Assured
FloWellTM
Formation Damage Removal that Kick-Starts Well Productivity
Peak introduces a new addition to its proprietary SIM System range for well remediation and flow control. FloWellTM is a slickline-set remedial technology capable of removing formation damage within selected downhole zones thus improving well productivity.
FloWellTM is designed to improve well productivity by removing certain types of formation damage (e.g. crushed zones in perforation tunnels, tenacious filter cakes and scales) in both oil and gas wells that are wireline-perforated. The condition of the near-wellbore region is critical to the production of hydrocarbons, and the perforating process is one major contributor to skin damage. The severe compressive force of perforating can reduce the permeability of the surrounding rock, which in turn reduces productivity.
Like the rest of the products within the SIM System range, FloWellTM is run, set and retrieved on slickline. Used in conjunction with Peak’s SIM Plug Systems to provide selective isolation of the zone to be treated, FloWellTM induces a sudden pressure drawdown in a wellbore, resulting in a surge of fluid inflow from the reservoir.
FloWellTM has been designed specifically for deployment in monobore oil and gas wells that are wireline-perforated.
All SIM System products are mechanically set, providing operational flexibility and safety. As a consequence of being run on slickline, it offers operators a cost effective and low risk intervention method to clean-up wellbore damage whilst conducting routine slickline operations.
Formationdamage
Undamagedformation
Undamagedformation
Crushed zone Cleaned upperforation tunnel
Restricted �ow path Maximised �ow path
FloWellTM is a dynamic underbalance system designed to improve productivity by the removal of skin and perforation damage
FloWellTM is a slickline deployable system that can be used to create a dynamic underbalance across a pre-determined interval within a monobore / pseudo-monobore completion string.
The system utilises Peak’s unique field proven SIM and SIMPLUS Plug systems as a means of zonal isolation between which the FloWellTM System is run and activated.
Its modular design offers flexibility and enables varying lengths of sand face to be treated. The packer isolation alleviates any chance of unwanted stimulation in zones of no interest.
Applications
n To remove formation damage in perforation tunnels
n Recover injectivity in injection wells
Features & Benefitsn Uses standard slickline tools and running procedures
n Safe – 100% mechanical, no pyrotechnics or electronics required
n Modular design allowing any length of zone to be treated
n Easily field re-dressable in remote locations
n Sized to pass through standard completion restrictions
n Standard fishing neck design for simple recovery
n High temperature applications up to 350oF
n Cost effective means of improving productivity
FloWellTM
Product Code: 420
FloWellTM is a cost effective, low risk, intervention method to clean up wellbore damage.
The FloWellTM deployment sequence is initiated by setting a SIM Plug at the lower end of the zone being targeted for stimulation. The required number of FloWellTM tubes are then stacked together with an upper SIM Plug set on top to achieve zonal isolation.
An activation prong is deployed to depth and downward jarring is then applied to start the surge sequence.
The FloWellTM is run, set and retrieved on standard slickline.
SIM Plug
SIM Plug
FloWellTM
SIM System: Interchangeable Modular Components
SIM System Variants
Equalising Prong for Melon Equalising Assembly
Sealing Prong
Melon type Equalising Assembly
Prong type Equalising Assembly
Large Bore Gauge Hanger
SIM Running Tool
Permanent Bridge Plug
FloWellTM
E-Line Setting Adaptor
Leak Detection Tool
SIM Retriveable Bridge Plug
Hanger Sub
Pump Open Sub
E-Line Setting Adaptor
SIM Running Tool SIM Retriveable Bridge Plug
Element
Hanger Conversion Kit
Top Latch Interchangeable Choke
Flow Sub
For illustrative purposes only – not to scale
[email protected] | www.peakwellsystems.com
© 2015 Peak Well Systems Pty Ltd. All rights reserved. This material and everything contained herein is the property of Peak Well Systems Pty Ltd and is prepared for information purposes only. Nothing contained within these materials shall be treated as a representation to be relied on by any person or an offer for sale or contract of any kind whatsoever. Any reproduction or distribution without the express written consent of Peak Well Systems Pty Ltd is strictly prohibited.
Perth | Aberdeen | Kuala Lumpur | Dubai
Please scan QR code to view our Peak Technology TV Channel
01 April 2015
Perth, Australia
About Peak Well Systems
Peak Well Systems is a leading specialist in the design and manufacture of advanced downhole tools for well intervention. We provide both operators and service companies around the world with an extensive range of innovative downhole products, expert field deployment and aftermarket support. Our aim is to reduce well operating costs and improve well performance for our customers. Our product portfolio comprises of Flow Control systems, which are fast becoming the products of choice around the world, and Premium Well Intervention tools for remedial well maintenance. All Peak products are designed to be Simple, Safe and Assured.