tm 2-day webcast/onsite auction...cnc wire type edms 1 – seibu model ew-a7s wire type cnc...

A Hilco Global CompanyVested in Your Success

31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995

www.hilcoind.com

Wednesday & Thursday, March 11th & 12thSt. Catharines, Ontario, Canada

2-DAY WEBCAST/ONSITE AUCTIONHilcoTM Industrial

Prefer click-to-bid? Register and bid on

2nd SALE IN A SERIES OF AUCTIONS

Featuring: CNC Turning, Machining & Gear Machinery, Forging, Spline Rollers, Broaching, Heat Treat, Robots, Tool Room,

Fabricating, Power Distribution

SOLD

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2

HilcoTM IndustrialDirectionSFroM eitHer toronto PeArSon internAtionAL AirPort (YYZ) or BuFFALointernAtionAL AirPort (BuF): TRAVEL To THE QEW AND TAKE EXIT FoR oNTARIoSTREET (EXIT 47). TURN SoUTH (RIGHT) oNTo oNTARIo STREET AND TRAVEL APPRoX.1 MILE To PLANT ENTRANCE AND PARKING LoT oN EAST SIDE oF oNTARIo ST.

FurtHer inForMAtion• AUCTIoN WILL BE CoNDUCTED IN U.S. CURRENCY oNLY.

• AN 18% BUYER'S PREMIUM WILL BE CHARGED oN ALL ASSETS. THEBUYER'S PREMIUM WILL BE REDUCED To 16% FoR ALL oNSITE ANDHILCAST WEBCAST BUYERS FoR PAYMENTS MADE BY MEANS oF CASH,CASHIER’S CHECK, CoMPANY CHECK (WITH BANK LETTER oF GUARANTEE)oR WIRE TRANSFER WITHIN 48 HoURS oF SALE CLoSE. AN 18% BUYER'SPREMIUM WILL BE CHARGED FoR ALL BIDSPoTTER PURCHASES WITH NoDISCoUNT FoR PRoMPT PAYMENT.

• REMoVAL IS BY APPoINTMENT oNLY, WITH HoURS oF REMoVALBETWEEN 8AM To 4PM MoNDAY THRU FRIDAY. PLEASE SEE oUR WEBSITEFoR ADDITIoNAL REMoVAL INFoRMATIoN. BUYERS WITH ITEMS LEFT oNSITE AFTER DEADLINE ARE SUBJECT To FINES oF $500 PER DAY.

• ALL BUYERS/VISIToRS To THE SITE ARE REQUIRED To HAVE THE FoLLoWING PPE: HARD HAT, SAFETY GLASSES, SAFETY VEST, STEEL ToE SAFETYSHoES. ALL JEWELRY MUST BE REMoVED PRIoR To ENTERING THE FACILITY.

MAcHinerY & eQuiPMent

KEN PLANET 248-238-7988 • [email protected] REYNoLDS 205-403-5942 • [email protected] inForMAtion

LESIA JoSEPH 616-328-6892 • [email protected] ACCoUNTS RECEIVABLE AT [email protected] Service

+1 877-37-HILCo • +1 616-732-1800 • [email protected] NEELY AT 248-254-9999 X16 • [email protected]

WEBCAST/ONSITE AUCTION

(17) CNC HORIZONTAL MACHINING CENTERS

Auction DAteS

WEDNESDAY & THURSDAY, MARCH 11

TH& 12

TH

BEGINNING AT 10AM LoCAL TIME

Preview

MoNDAY & TUESDAY,MARCH 9

TH& 10

TH

8AM To 4PM LoCAL TIME TO SCHEDULE AN EArLiEr iNSpECTiON, pLEASE CONTACT kEN pLANET AT 248-238-7988, [email protected] Or mArk rEyNOLDS AT 205-403-5942, EmAiL [email protected]

Auction & Preview LocAtion282 / 285 oNTARIo ST ST. CATHARINES, oNTARIo, CANADA

AUCTION SCHEDULE

DAY 2: Thursday, March 12th

DAY 1: Wednesday, March 11th

• Gantry Mounted Fanuc Robots• CNC Horizontal & Vertical Turning Centers• CNC Horizontal & Vertical Machining Centers• CNC Gear Hobbers & Shavers• Gear Shapers & Generators• Spline Rollers• Angle & Bar Shears• Beche Cross Rolling Machines• Hot Forming Press / Ajax Press• Shot Blast Equipment• Induction Heating, Heat Treat Furnaces &

Gas Generators• Zeiss Coordinate Measuring Machine• Tool Room Equipment• Plant Support & Vidmar/Lista Cabinets

• Tool Room Equipment• Centerless & Double Disc Grinders - Cincinnati

& Gardner• Table Type & Floor Type Horizontal Boring Mills• Rolling Stock• Bridge Cranes• Electrical Substations/Complete Power House• Broaching Machines & Hones• Automatic Screw Machines• Washers/Mist & Dust Collectors/Coolant Systems• Dynamometers & Test Equipment• Plant Support & Vidmar/Lista Cabinets

Bid Onsite or via Webcast atwww.hilcoind.com

Prefer click-to-bid?Register and bid on

Bid Onsite or Bid remotely with HilCast

MajorNorth American

ManufacturerAUTOMOTIVE

For more information, please visit us on the web at www.hilcoind.com/StCath 3

(17) CNC HORIZONTAL MACHINING CENTERSDAY 1: WEDNESDAY, MARCH 11TH

(17) CNC HORIZONTAL MACHINING CENTERS7 – ENSHU MODEL J40H 4-AXIS CNC HORIZONTAL MACHINING

CENTERS, S/Ns 149, 150, 151, 152, 153 & 154 (All 1997), NikkenRotary Table, Approx. Travels: X – 500 mm (19.69"), Y – 500 mm(19.69"), Z – 500 mm (19.69"), 24 Position ATC, Dual Arm ToolChanger, GE Fanuc 18-M CNC Control

4 – CINCINNATI MODEL MAXIM 500 4-AXIS CNC HORIZONTALMACHINING CENTERS, S/Ns 3631B0194-0015, 3631B0194-0017,3631B0194-0074 & 3631B0194-0083, Travels: X – 29.5", Y – 27.6", Z– 19.5", Fanuc 16-M CNC Control, Dual Pallets 19.6" x 19.6", 40Position ATC – 50 Taper, Spindle Speeds 10 – 7,000 RPM, ChipConveyor

3 – TOYODA MODEL FH55 4-AXIS CNC HORIZONTAL MACHININGCENTERS, S/Ns NMU1166, 1169 & 1170, Dual Pallets 21.5" x 21.5",Travels: X – 28", Y – 28", Z – 22.1", GE Fanuc 15M CNC Control, 60Position ATC – 50 Taper

1 – CINCINNATI MODEL T-10 CNC HORIZONTAL MACHINING CENTER, S/N 3121A2184-0016, Acramatic 900 Control, Dual Pallets19.7" x 19.7", Travels: X – 26", Y – 26", Z – 26"

1 – YASDA MODEL YBM 800 N 4-AXIS CNC HORIZONTAL MACHININGCENTER, Dual Pallets Approx. 29" x 29", 60 Position ATC – 50 Taper,GE Fanuc 150-M CNC Control, Chip Conveyor

1 – MITSUI SEIKI MODEL HT4A 4-AXIS CNC HORIZONTAL MACHININGCENTER, Dual Pallets 19.5" x 19.5", 32 Position ATC – 50 Taper, Fanuc15-M CNC Control

NEGOTIATE YOURPRIVATE TREATYPURCHASE

by February 20th for select assetsKen Planet 248-238-7988, [email protected]

Mark Reynolds 205-403-5942, [email protected]

Make an

Offer


(60+) CNC LATHES & TURNING CENTERS1 – FUJI MODEL CSD 400 300MM X 150MM FULLY AUTOMATED

HORIZONTAL TWIN SPINDLE CNC LATHE, S/N SE0097050 (2013),Dual Spindles, Fewer than 2100 Hours, Fanuc Oi-TD Control, Max.Spindle Speed 2220 RPM, Spindle Motors 15 H.P., Marpos P7meElectronic Measuring System, Gantry Robot, 10-Pallet Work Stocker,Located Offsite – To Schedule an Inspection Under Power Contact EdCervac 847-849-2935, Email [email protected]

21 – FUJI MODEL FS4-31G1 TWO-AXIS CNC LATHES, (All 2003), Size ofWorkpiece 100 mm x 60 mm (3.94" x 2.36"), Spindle Diameter 100 mm(3.94"), Spindle Bore Diameter 56 mm (2.29"), Spindle Speeds 750-4000 RPM / 580-2710 RPM, Work Range: X – 300 mm (11.81"), Z– 270 mm (10.63"), Gang Tools, Chuck Diameter 8", Fanuc 21i-TB CNCControl, Robot Type L35-08B Loader/Unloader, Load/Unload Speed 2.5 Seconds, Chip Conveyor, Marposs M5 Gauge

1 – MORI SEIKI MODEL ZL25B-1000 4-AXIS CNC TURNING CENTER,S/N ZL25-907 (1997), Two Turrets – 10 Position (Upper) & 8 Position(Lower), Tailstock, GE Fanuc Series 16-T CNC Control, TurningDiameter 10.24", Centers 40"

10 – MORI SEIKI MODEL ZL25B-1000 4-AXIS CNC TURNING CENTERS,S/Ns ZL25-692, 695, 702, 703, 704, 705, 706, 712, 715 & 718, (2)Turrets – 10 Position (Upper) & 8 Position (Lower), Tailstock, GE FanucSeries 16-T CNC Control, Turning Diameter 10.24", Centers 40", Fanuc#G265C Gantry Robot

8 – TAKAMATSU MODEL X200 DUAL SPINDLE CNC LATHES (All 2004),Max Bar Diameter 51 mm (2"), Travels: X – 240 mm (9.45"), Z – 550 mm (21.65"), Fanuc 18i-TBCNC Control, 12 Position Turret, Pendant Control, Max RPM 2,000, Load Station, Gauge Station,Buffer Conveyor

3 – HARDINGE MODEL CONQUEST T51 2-AXIS CNC TURNING CENTERS, S/Ns CLT-378-C, CLT-379-C & CLT-380-C, 12 Position Turret, Tail Stock, Fanuc 18-T CNC Control, Part Catcher,Chip Conveyor

11 – HARDINGE MODEL CONQUEST T51 2-AXIS CNC TURNING CENTERS, 12 Position Turret,Tail Stock, Fanuc 18-T CNC Control, Robot Loader Arm, Chip Conveyor

1 – NAKAMURA TOME MODEL SUPERTURN 4 2-AXIS CNC LATHE, S/N C31511, 10" Diameter 3-Jaw Chuck, Tailstock, 12 Position Turret, Chip Conveyor

1 – HITACHI SEIKI TYPE HITEC-TURN 20S II CNC TURNING CENTER, S/N HTS 2148HL, SeikiMulti Control, 8" Diameter Chuck x 5,000 RPM, Yasnac LX3 Power Supply

1 – HITACHI SEIKI MODEL HITEC-TURN 25S CNC LATHE, Seiki Multi CNC Control, 10 PositionATC, Tail Stock, Kitagawa B10 Chuck

1 – TOYODA MODEL GT44 2-AXIS CNC LATHE, S/N 44021, GE Fanuc 15M CNC Control, 12 Position Turret, Chip Conveyor

1 – J&L 4-AXIS CNC TURNING CENTER, S/N 578046, Two Turrets (8 Position & 6 Position),Tailstock, 12" Diameter 3-Jaw Chuck, Chip Conveyor, GE Fanuc 15-T CNC Control, Bar Feed

1 – MHP MODEL MTC-3 2-AXIS CNC TURNING CENTER, 12 Position Turret, LNS Hydrobar BarFeed, S/N 7536

1 – MIYANO MODEL FNC400 4-AXIS CNC TURNING CENTER, S/N FN 40204, Two Turrets (8 Position Each), Tailstock, 15" Diameter 3-Jaw Chuck, Chip Conveyor

1 – OKUMA MODEL LS30-N 2-AXIS CNC TURNING CENTER, S/N 8308-0168, 3-Jaw Chuck,Tailstock, Tool Turret

3 – AUTOMATION DEVICES CANADA HOPPER/FEEDERS, S/N J230502-2, Allen BradleyPanelview 550 Terminal, Feeds Fuji Lathe S/Ns 14062, 14064 & 14070

1 – LNS MODEL QUICK LOAD SERVO S2 BAR FEED, S/N 300329, Bar Length Capacity 14" – 63",Pendant

2004

(9) CNC VERTICAL TURNING CENTERS9 – HARDINGE MODEL VT 200 CONQUEST 2-AXIS CNC

VERTICAL TURNING CENTERS, 15/18.5 KW GE FanucAC Spindle Motor, Fanuc Control, Travels: X – 7.94", Z – 19.88", 12 Position Turret, Renishaw MI 12 Probe Interface,Parts Holder/Chucks, Load/Unload Arm, Chip Conveyor

CNC VERTICAL MACHINING CENTERS1 – FADAL MODEL 6030 / 907-1 3-AXIS CNC VERTICAL

MACHINING CENTER, S/N 9906892, Table 30" x 60"1 – MAKINO MODEL SNC64 3-AXIS CNC VERTICAL

MACHINING CENTER, S/N A89-55, Table 29.5" x 15.7",Travels: X – 23.6", Y – 15.7", Z – 15.7", 5 Position ATC,Pendant

2013 Under Power

(70+) CNC LATHES, TURNING CENTERS& MACHINING CENTERSDAY 1: WEDNESDAY, MARCH 11TH


CNC EDM • CNC GEAR MACHINERYSERVO ROBOTS

CNC WIRE TYPE EDMS1 – SEIBU MODEL EW-A7S WIRE TYPE CNC ELECTRICAL DISCHARGE

MACHINE, S/N 9740EX428 (1998), Chamber Approx. 33" F-B x 43" L-R,Remcor #CH-1500 Chiller, Hycool CKD Water Cooling Unit, 4-Axis PendantControl

4 – ELOX ASTRA MKII 4000 ELECTRICAL DISCHARGE MACHINES

CNC & MANUAL ROBOTS2 – FANUC MODEL M16iB GANTRY MOUNTED ROBOTS, S/Ns F-60273 &

F-60274 (Both 2003), Gantry Length Approx. 65', Fanuc Controllers R-J3iB, S/N E03Y02034 & E03Y02757

2 – FANUC MODEL M16iB GANTRY MOUNTED ROBOTS, S/Ns F-60275 &F-60276 (Both 2003), Gantry Length Approx. 80', Rail S/N TP00448, FanucControllers R-J3iB, S/N E03Y2758 & E03Y02759, Teach Pendant

CNC GEAR HOBBERS3 – PFAUTER MODEL P100 5-AXIS CNC GEAR HOBBERS, S/Ns 28190,

28192, 28193 (All 1996), GE Fanuc Series 15-M CNC Control, Chip Conveyor

2 – PFAUTER MODEL PE100 5-AXIS CNC GEAR HOBBERS, S/Ns 28195 &28196 (Both 1996), GE Fanuc 15-M CNC Control, Chip Conveyor

1 – PFAUTER MODEL P100AW 5-AXIS CNC GEAR HOBBER, S/N 28197(1996), GE Fanuc CNC Control, Chip Conveyor

(8) CNC GEAR SHAVERS8 – HURTH MODEL ZS240T CNC GEAR SHAVERS, Machine # 44508,

44509, 44564, 44565, 44566, 44568, 44569 & 44697 (1994), GE Fanuc 16-M CNC Control

(9) GEAR INSPECTION & CHECKERS1 – M&M MODEL 3015 4 12 12 SERIES 3000 QC GEAR INSPECTION

SYSTEM, S/N 58221 – ILLITRON MODEL 2276-7-3C GEAR CHECKER, S/N 10981, ITW Illitron

#1607-10 Electronic Recorder, S/N 771 – ILLITRON MODEL 3912A-3C COMPUTERIZED HELICAL LEAD GEAR

CHECKER, S/N 10979, Illitron #1607-18-2 Special Electronic Recorder,S/N 11581, Manual Sine Bar Settings, Vernac Pitch Adjustment

1 – GLEASON MODEL CSF/2 SINGLE FLANK GEAR TESTER, S/N 1016-01,Set Tru #0418 – 6-1/4" Diameter x 4-Jaw Chuck, Head Travel Approx.16" Travel

1 – ILLITRON MODEL 3412B-3C COMPUTERIZED VARIABLE INVOLUTEGEAR MEASURING CENTER, S/N 11315, Illitron DRO

4 – MOORE GEAR CHECKERS

CNC SHAVER CUTTERS2 – HURTH MODEL SRS402 CNC SHAVE CUTTER GRINDERS, S/Ns 21788

& 21831, Retrofit GE Fanuc 16-M CNC Control, 11-Axes CNC Control

(50+) GEAR SHAPERS12 – FELLOWS MODEL 10-2 GEAR SHAPERS, SPM 33-1300, RPM “D"

Shaft 5-800, Feed Per Stroke ,001" – .040"43 – DEMM MODEL #SR250-50 GEAR SHAPERS (1999 & 2000), Cutler

Hammer Panelmate Terminal, SPM 33-1300, RPM “D" Shaft 5-800, FeedPer Stroke ,001" – .040"

(14) GEAR GENERATORS14 – GLEASON MODEL 725 STRAIGHT BEVEL REVACYCLE GEAR

GENERATORS, Root Angle Range 15° – 50°, Pitch Diameter 6" Manual,Pitch Diameter – Automatic Gear/Pinion Hopper 4"

DAY 1: WEDNESDAY, MARCH 11TH


SPLINE ROLLERS • BAR SHEAR LINES FORGING • INDUCTION HARDENING

SPLINE ROLLERS1 – ANDERSON COOK MODEL 350-S 48" SPLINE ROLLER, S/N 267 & 269 (1991),

40 HP Motor & Hydraulic Power Unit, Travelling Overarm Unit1 – ANDERSON COOK MODEL 340 MARAND 36" SPLINE ROLLER, S/N 298,

25 HP Motor & Hydraulic Power Unit, Overarm Unit2 – EXCELLO MODEL ROTO FLO 3225 24" SPLINE ROLLERS, S/N 550-234-ELD

& 550-235-ELD, Over Arm/Load Beam, 15 HP Motor & Hydraulic Power Unit1 – MICHIGAN MODEL 3251 48" SPLINE ROLLER, S/N 4567, Overarm Unit, 40 HP

Motor & Hydraulic Power Unit1 – MICHIGAN MODEL 3251 36" SPLINE ROLLER, S/N 4277, Overarm Unit, 20 HP

Motor & Hydraulic Power Unit

FORGING EQUIPMENT1 – PELTZER & EHLERS MODEL POLYMASTER 630 TON 4-STATION HOT FORMING

PRESS, S/N 282634, Slide Stroke 12.6" (320 mm), Max Stroke of Die Knock-Outs6.3" (160 mm), Die Diameter 9.8" (25 mm), Strokes per Minute Max 50, Max BlankDiameter 3.94" (100 mm), Max Billet Length 6.3" (160 mm), Power Infeed Rolls

1 – IPE MODEL CHESTON #SP-753 750 KW INDUCTION HEATER, S/N C8792A4 – BECHE MODEL RBQ 800A ROUND DIE CROSS ROLLING MACHINES,

Machine # 125710 (2000), 122100, 122101, 122102 (1997), Workpiece Diameter1.97" (50 mm), Max Length Workpiece 39.4" (1000 mm), Max TangentialRollingforce 15.5 Tons (152 kN), Cycle Time 5-10 Seconds, Distance BetweenRolls 3.94-8.86" (100-225 mm), Tool Clamp Area 31.5" Dia x 39.4" (800 mm Dia x1000 mm), 150 HP Emerson/US Drive Motor, Motorized Roll Gap Adjustment

1 – AJAX MODEL 25C 2500 TON PRESS FRAME, S/N 45856 – MINSTER/ERIE/TOLEDO STRAIGHT SIDE SINGLE CRANK TRIM PRESSES8 – FROHLICH TYPE WS1 / SIZE 1500 & SIZE 1750 HOPPER & VIBRATORY

BOWL FEEDERS (Late as 2000)

BAR SHEAR LINES1 – AMD 360 TON HYDRAULIC BILLET, ANGLE & BAR SHEAR,

S/N 360-1830, 4-Post Hydraulic Press, Stroke 5", BetweenColumns 18 1/2" L-R x 17" F-B, Bar Capacity 3", Capacity 10,000Lb. Bar Debundler & Feeder, Press Capacity 30 Cuts/Minute

1 – FMR 325 TON HYDRAULIC BILLET, ANGLE & BAR SHEAR(2003), 4-Post Hydraulic Press, Bar Debundler & Feeder

INDUCTION HARDENING1 – CONTOUR HARDENINGS INC. MODEL MICRO PULSE DUAL

SPINDLE AUTOMATIC CONTOUR INDUCTION HARDENER(1994), Pillar #RF450P Power Source, S/N 35349, KW 300/450,Freq 450 kHZ, Quench Pump, Allen Bradley Monitor

2 – TOCCO INDUCTION HARDENERS, S/Ns T4-4901-12A & T4-4901-12C,Hardened & Straighten Operation, Equipment Includes:Inductron/Tocco Panel #100-10T-03, S/N T4-4901-12A / 12-304G-12A Static Power Supply, Output 100 KW, 800 Volts

4 – TOCCO MODEL OL-204 INDUCTION HARDENERS, S/Ns T4-4903,NA, Stamp Station

1 – CK INDUSTRIES CRACK/LOAD & HARDNESS TESTER, Job # 95-1133 (1996), Includes Allen Bradley Panelview 1200, KJ LawVerimet 9000 Control, KJ Law Verimet M730 III

1 – AJAX TOCCO MODEL 0221314A INDUCTION HARDENER, S/N 23-1045A & 23-1045B, Panelmate Power

1 – IBG MODEL P/N11108 EDDY CURRENT CHECKER, PanelmatePower Pro ((East / B-33))

QUANTITY OF Tocco Model D-80761 Power Modules & Tocco ModelOL-242 Dual Channel Energy Monitors

Partial Listing Only, Please VisitOur Website

www.hilcoind.com


SOLD


SHOT BLAST EQUIPMENT • HEAT TREATCMM • PLANT SUPPORT

SHOT BLAST EQUIPMENT1 – PANGBORN MODEL ROTOBLAST BARREL SHOT BLAST

MACHINE2 – WHEELABRATOR MODEL TUMBLAST 48" X 72" BLAST

SYSTEMS, S/Ns A77865 & A92943, Load Capacity 30 CubicFeet, Load Tray Approx. 66" F-B x 64" L-R

1 – IOWA ENGINEERING PROCESSES CORP. MODEL 550CASCADE CHAMBER TYPE DEBURRING MACHINE, S/N H-3021 (1996), Allen Bradley #1336 Plus Drives, WeightCapacity 550 Lbs, Work Plate 27" x 29"

4 – IOWA ENGINEERING PROCESSES CORP. MODEL 80-2800CASCADE CHAMBER TYPE DEBURRING MACHINES,S/Ns H-3029-B, NA (1997), Allen Bradley Panelview 550Terminal, Weight Capacity 800 Lbs, Work Plate 28.5" x 38", Two7.5 HP Vibration Drives, 5 HP Motor & Hydraulic Pump, 2 HPMedia Return Motor, 1 HP Wash Return Motor

1 – WHEELABRATOR #1 W/A ROLL THRU M/C TWO-WHEELHORIZONTAL TYPE SHOT BLAST MACHINE, S/N 10-0196C,Two Abrasive Wheels x 20 HP, Dust Collector

HEAT TREAT FURNACES1 – HOLCROFT NATURAL GAS BELT TYPE DRAW FURNACE, S/N CJ85(1), Belt Width Approx.

54" x Length Approx. 35', Capacity 2165 Lbs/Hour, Max Temp 600° F, Loader & Unloader Station1 – HOLCROFT NATURAL GAS BELT TYPE HEAT TREAT TEMPERING FURNACE, Job # CJ-83, Belt

Width Approx. 42”, Length Approx. 40'1 – CANEFCO NATURAL GAS FIRED ANNEALING LINE, Capacity Net 2,400 Lbs/Hr, Max Temp 1650° F,

5-Zone Furnace, Natural Gas, Hi-Tronic Weigh Scale2 – HOLCROFT CARBONTRIDING & DRAW HEATING GAS TYPE FURNACE LINES, Job # LJ-0082 &

#LJ-0092, Capacity 2,560 Lbs/Hour Gross, Max Temp 600° F, Min Temp 350° F, Draw/Quench/Cool,Integrated Control Station, Robotic Basket Load Station

4 – HOLCROFT CAPACITY 3600 CFH & 4800 DFH LO-DEW GAS GENERATORS2 – PARK THERMAL HEAT TREAT FURNACES, S/Ns P1999 & P2000 (1987), Chamber Approx. 40" W

x 36" D x 48" H, Roller Cart1 – CAN-ENG DIE PREHEAT STRESS RELIEVING FURNACE, S/N S3116, Max Temp 1,850° F1 – HEVI-DUTY MODEL HD 364826-A STRESS RELIEVING FURNACE, S/N 605214 – LEEDS BUCKET TYPE HOMO FURNACES, Chamber Sizes 12” Dia x 20” H/22” Dia x 24” H/12” Dia x 14” H1 – PARK THERMAL MODEL 7GT-066 ELECTRIC BOX FURNACE, S/N 6088, Chamber Approx. 18" x

18" x 18" Deep, Max Temp 2,300° F, Volts 460, KW 25, Allen Bradley DTAM Micro Furnace Controller

COORDINATE MEASURING MACHINE1 – CARL ZEISS MODEL UMC 850 COORDINATE MEASURING MACHINE, S/N 78334, Range: Z-600

mm, Y-1800 mm

PLANT SUPPORT & ASSORTED TOOL ROOM (OFFERED BOTH DAYS)QUANTITY OF Multi-Drawer Storage Cabinets: Lista/Vidmar/Nu-Era, Unused Carbide Inserts, UnusedTooling/Drills/Reamers, Unused Gleason Hobs, Unused Collets, Rotary Tables, Sine Plates, Chucks,Inspection Items, Lathes, Mills, Arbor Presses, Pedestal Grinders, Drill Presses, Rigging Accessories,Welders, Unused Roller Conveyor Systems, Etc.

PRIVATE TREATY PURCHASEby February 20th for select assetsKen Planet 248-238-7988, [email protected]

Mark Reynolds 205-403-5942,[email protected]

NEGOTIATE YOUR

Make an

Offer


SOLD


HORIZONTAL BORING MILLSTOOL ROOM EQUIPMENT

HORIZONTAL BORING MILLS1 – TOS MODEL WD130A TRAVELLING COLUMN FLOOR TYPE HORIZONTAL

BORING MILL, S/N 0337, Work Spindle Diameter 130 mm (5.12"), HeadstockVertical Travel 2300 mm (90.55"), Headstock Horizontal Travel 450 mm(17.72"), Max Distance Work Spindle Centerline & Bedway Surface 812 mm(32"), Column Travel Along Bed 3200 mm (126"), Length of Bed 5230 mm(209.5"), Retrofit Indramat / Allen Bradley PLC / Electric AC Servo Drives

2 – TOS VARNSDORF MODEL W100A TABLE TYPE HORIZONTAL BORINGMILLS, S/Ns 0347 & 18-01 (1986), Spindle Diameter 100 mm (3.94"), TableClamp Surface 1250 mm x 1250 mm (49.2" x 49.2"), Travels: Cross 1600 mm(63"), Longitudinal 1250 mm (49.21"), Vertical Travel of Head 1120 mm (44"),Spindle Travel 900 mm (35.43"), Digital Readout, Spindle Speeds 7.1-1120RPM, S/N 0347 with Outboard Support

1 – TOS VARNSDORF MODEL W-9A TABLE TYPE HORIZONTAL BORINGMILL, S/N No 01-22, Spindle Approx. 3.53", Table 39.5" x 44", HorizontalTable Travel (X-Axis) Approx. 55", Vertical Travel of Head (Y-Axis) Approx.42", Digital Readout

1 – CINCINNATI GILBERT TABLE TYPE HORIZONTAL BORING MILL, S/N 4C-123, Table 48" x 120"

TOOL ROOM EQUIPMENT1 – SAIGA 500 TON HOBBING PRESS, Bed & Platen 40" F-B

x 45" L-R, Between Posts Approx. 20" F-B x 25" L-R, StrokeApprox. 6", Daylight Approx. 26.5", Post Diameter Approx. 5"

1 – ENERPAC 200 TON H-FRAME SHOP PRESS, DistanceBetween Uprights 48", Enerpac #RR20018 Cylinder, PumpSeries GEx5, Model GPER5420JN, Max 10,000 PSI

1 – OTC SERIES Y-1506 50 TON H-FRAME SHOP PRESS,S/N 1594, Between Uprights 36"

1 – OILGEAR 6 TON GAP FRAME HYDRAULIC PRESS, S/N45042, Bed Plate 14" x 32", Stroke Approx. 8", DaylightApprox. 16", Floor Standing Motor & Hydraulic Power Unit

1 – WEBSTER & BENNETT VERTICAL TURRET LATHE,Table Approx. 47-1/2" Diameter, Speed 6.3 – 140 RPM

1 – MOORE MODEL 3 JIG GRINDER, S/N G294, Cabinet withAssorted Parts

2 – PRATT & WHITNEY MODEL 2A JIG BORERS, S/Ns 22600& 26953, 22" x 44" Slotted Table, 16" Tilting Rotary Table,440v-3ph-65k Amps, Acu-Rite Master MP DRO

1 – CINCINNATI GILBERT 4' X 9" RADIAL ARM DRILL,S/N 5920, Base Extension, 2-Sided Box Table

1 – RICHMOND ENGINEERING 4' X 12" RADIAL ARM DRILL,S/N PE1079 A1-3, Box Table, Spindle Speeds 20-925 RPM

1 – RICHMOND HERALD 3' X 9" RADIAL ARM DRILL,S/N N/A, Box Table, Coolant Pump, Spindle Speeds 50-2000 RPM, 3 HP

1 – WADKIN PLANER JOINTER, Table 19" x 60", 5 HP Motor,Guide Bar 36"

LARGE QUANTITY OF TOOLROOM MACHINERY & EQUIPMENT, INCLUDING:Diversi-Tech Model DD 3x4 Down Draft Tables, Sunnen Model MBB1650 Hone, S/N 11082, Jones & Shipman Universal Cylindrical Grinder, S/N 75306 1897/3, Table8" x 82.5", Head Stock & Tail Stock, Heald Model 273A Internal Grinder, S/N 44850,Chuck Diameter 15", Chuck Swivel 0 – 90°, Electro Arc Model 3S Disintegrator, ModelLAC-50 Type D36B Pass-Through Demagnetizer, Magnaflux Type SB-911Demagnetizer, Hardinge Tool Room Lathe, Hydraulic Surface Grinders, Arbor Presses– Greenerd & Dake, Drill Presses, Ideal Wire Stitcher, Pedestal Grinders, Quantity ofShop Platform Scales & Floor Scales, 3-Jaw & 4-Jaw Chucks, Rotary Tables, BenchTop Vises to 6”, Threading Heads, Hammer Drills, Pneumatic Impact Drills, EnerpacHydraulic Pumps, Crimpers, Transmission Stands, Manual & Pneumatic Lift Tables,Layout Tables, Arbor Presses, Flammable Storage Cabinets

DAY 2: THURSDAY, MARCH 12TH


(14) ENGINE LATHES(13) MILLING MACHINES

(14) ENGINE LATHES1 – MITCHELL ENGINE LATHE, Swing Approx. 28" x Centers

Approx.192", Hole Through Spindle 4 1/8" Diameter, Tail Stock,Cross Slide, Steady Rest, Inch/Metric, Spindle Speeds 8-250RPM, 4-Jaw Chuck x 24 1/2" Diameter

1 – SCHAERER GAP BED ENGINE LATHE, S/N 82049, Swingover Bed 680 mm (26 3/4") / Swing over Gap 760 mm (30"),Centers 1000 mm (39.4"), Hole Through Spindle 3.5" Diameter,Tail Stock, Cross Slide, Metric Only, Spindle Speeds 7 – 1400 RPM, 24" Diameter x 4-Jaw Chuck, 20 HP

1 – LODGE & SHIPLEY 22" ENGINE LATHE, Swing 22" x CentersApprox. 80", Tail Stock, Cross Slide, 4-Jaw Chuck x Diameter21", 2-Axis Acu-Rite DRO, 20 HP, Spindle Speeds 9-500 RPM

1 – OERLIKON MODEL VDF DUE 560 ENGINE LATHE, Swingover Bed Approx. 22", Centers Approx. 80", Tail Stock, CrossSlide, Hole Through Spindle 2 3/8", 4-Jaw Chuck, SpindleSpeeds 14-1800 RPM, 15 KW (20 HP) Motor, Heidenhain 2-Axis DRO

1 – STANDARD MODEL 2080 ENGINE LATHE, S/N 9269, Swing20" x Centers 80", Tail Stock, Cross Slide, 12" Diameter x 3-JawChuck, Hole Through Spindle 3" Diameter, Inch/Metric, Acu-RiteTP 2-Axis DRO, Spindle Speeds 27-1600 RPM

1 – TURRET MODEL MAXTURN 1800 18" X 60" ENGINE LATHE,60 inch X axis, 20" Swing over the ways, 12" Swing over thecross slide, 29" Swing over the 8" Gap, 12" 3-Jaw Chuck, SteadyRest

1 – DEAN SMITH & GRACE TYPE 18 HD ENGINE LATHE,Machine # 29860, Swing 18" x Centers 48", Cross Slide, TailStock, 4-Jaw Chuck x 18" Diameter, Hole Through Spindle 3.5"

1 – DEAN SMITH & GRACE TYPE 18 ENGINE LATHE, S/N 280,Swing 18" x Centers 48", Hole Through Spindle 3 3/4" Diameter,Tail Stock, Cross Slide, 3-Jaw Chuck x 15" Diameter, SpindleSpeeds 13.7 – 1100 RPM, Acu Rite 2-Axis DRO, 25 HP Motor

1 – DEAN SMITH & GRACE TYPE 17 ENGINE LATHE, Machine # 35149-II-63, Swing 17" x Centers 48", Cross Slide, Tail Stock,12" 3-Jaw, Hole Through Spindle 2.75", 10 HP Motor

1 – COLCHESTER TYPE 17 16" X 84" ENGINE LATHE, Machine# 17881070259, Swing 16" x Centers 84", Cross Slide, SteadyRest, 3-Jaw Chuck x 12 1/4" Diameter, Hole Through Spindle 31/8", Inch/Metric Threading

1 – COLCHESTER MODEL MASTER 2500 12" X 30" ENGINELATHE, S/N 5/0001 11845, Swing 12", Centers 30", Cross Slide,Tail Stock, Hole Through Spindle 1 7/8", Spindle Speeds 30-2500, Inch/Metric Threading, 8" 3-Jaw Chuck

1 – COLCHESTER MODEL TRIUMPH 2000 ENGINE LATHE,S/N 6/0044/28648, Cross Slide, Tail Stock, Acu-Rite 2-AxisDRO, Spindle Speeds 25-2000 RPM

1 – DOMINION TOOL ROOM LATHE, Mounted on ColchesterBase, 3-Jaw Chuck x Diameter 7.5", Swing Approx. 13", Centers36", Tail Stock, Cross Slide

1 – WARD MODEL 3DS TURRET LATHE, 6-Position Turret,Spindle Speeds 5-1650 RPM, Hole Through Spindle 2" Diameter, Cross Slide

(13) MILLING MACHINES1 – VARNAMO MULTI MILL WITH MOTORIZED OVERARM UNIVERSAL MILLING

MACHINE, Table 13-3/4" x 64", Longitudinal Travel 44-1/4", Cross Travel 14", VerticalTraverse 17 3/4", 15 HP Motor, Spindle Taper ISO 50, Feed Motor 3 HP, Spindle Speeds(16) 40-1800 RPM, Motorized Overarm 7.5 HP x Spindle Speeds 90-2000 RPM

1 – CINCINNATI MODEL 28" SERIES HYDROTEL VERTICAL MILLING MACHINE, S/N 80-4090392-1, Table 28" x 92"

1 – CINCINNATI MODEL HYDROTEL VERTICAL MILLING MACHINE, Table 23" x 83", 8" Vise with Rotary Base

1 – CINCINNATI MODEL 205-12 MI UNIV LL UNIVERSAL MILLING MACHINE,S/N 2J2U5SE-6, Table 12" x 54" T-slotted, Spindle Speeds 25-1500 RPM, Acu-RiteX/Y/Z DRO, Coolant

1 – BURKHARDT VERTICAL BORING & MILLING MACHINE, Machine # 116411, Table30" x 48", Riser 30" x 45.5" x 9.5" H, Spindle Speeds 5.5-1,500 RPM, Com Nr. 1882

1 – RAMBAUDI MODEL MS3 MILLING MACHINE, S/N 61454, Table 12" x 51.5", Spindle –50 Taper & 40 Taper, Spindle Speeds 25-1500 RPM, 5.5 HP Motor

1 – KEARNEY & TRECKER 3HP MILLING MACHINE, 12" x 50" Slotted Table, 25-1500 RPM1 – SAJO MODEL UF-54 UNIVERSAL MILLING MACHINE, S/N 752129, Table 13" x 59",

Sajo #URF-54 Head, – S/N 743611 – SAJO MODEL UF-54 UNIVERSAL HORIZONTAL MILLING MACHINE, Machine

# 6340, Table 13" x 54", Spindle Speeds 39-1500, Head Type URF541 – LAGUN MODEL FU-1400 UNIVERSAL MILLING MACHINE, Table 13.5" x 56", Spindle

Speeds 28-1400 RPM2 – SAJO TYPE UF-54 HORIZONTAL MILLING MACHINES, S/N 65969, 65970, 11-1/4" x 52"

Slotted Table, Acu-Rite DRO1 – LAGUN MODEL FTV-2 VERTICAL MILLING MACHINE, Table 9" x 48", 3 HP, Acu-Rite

Master MP DRO

Make an

Offerby February 20th for select assetsKen Planet 248-238-7988, [email protected]

Mark Reynolds 205-403-5942, [email protected]

NEGOTIATE YOUR PRIVATE TREATY PURCHASE



HORIZONTAL & VERTICAL BAND SAWS(19) CENTERLESS, DISC & SURFACE GRINDERS

HORIZONTAL & VERTICAL BAND SAWS1 – BEHRINGER MODEL HBP430A AUTOMATIC HORIZONTAL BAND SAW,

S/N 599499, Capacity 17" Diameter / 17" x 17" Rectangle, Bar Debundler &Feed – Capacity 20', Allen Bradley Panelview 550 Terminal

1 – WOODWORKING VERTICAL BAND SAW, Table 28" x 32", Throat 34", 2 HPMotor

1 – DOALL MODEL V-26 26" VERTICAL BAND SAW, S/N 26532839, Tilt Table 30" x 30", 3-Phase, 440-Volt, 60-Hz, 177" Band Length

1 – DOALL MODEL V36 36" VERTICAL BAND SAW, S/N 3641702 1 – MARVEL MODEL SERIES 8 MARK I TILT HEAD VERTICAL BAND SAW, S/N

822484-W1 – TYPE FAB18 18" VERTICAL BAND SAW, Table 20" x 20”

(10) CENTERLESS & DOUBLE DISC GRINDERS4 – CINCINNATI MILACRON MODEL 330-15 CENTERLESS GRINDERS,

S/Ns 350415H78-0006, 350415H79-0015, 350415H80-0002 & 350415H80-0018,Grinding Wheel Diameter Max 24", Truing Attachment, Marposs E44 Gauge,Truing Control, Compensation – Fine & Coarse, Injector – Advance & Retract

2 – GARDNER MODEL DMBD-33 DOUBLE DISC GRINDERS, S/Ns 911-5 & 911-6, Disc Diameter 33", Two (2) 40 HP Spindle Motors

2 – BESLY DOUBLE DISC GRINDERS, S/Ns 81-5-1011-271, (2) 15 HP Motors2 – BESLY DOUBLE DISC GRINDERS, S/Ns 81-5-6274-271-180 & 81-5-6275-

271-278, Wheel Diameter Approx. 30", (2) Drive 40 HP Motors

(9) SURFACE GRINDERS1 – BLANCHARD 60" ROTARY SURFACE GRINDER, S/N 11147, 100 HP

Motor1 – MATTISON SURFACE GRINDER, S/N 130, Table & Electromagnetic

Chuck 15" x 48", Walker Smart 5D Chuck Control, 15 HP Spindle Motor,Cross Feed, Wheel Dresser, Chip Conveyor

1 – MATTISON 16" X 30" X 72" SURFACE GRINDER, S/N 1119, Table 16" x 80", Electromagnetic Chuck 16" x 74", Neutrofier II Control,Travatrol #CRC17 Control, S/N 1RC35A, Coolant, 30 HP

1 – GALLMEYER & LIVINGSTON GRAND RAPIDS 576 SURFACEGRINDER, S/N 576155 (1969), Table 16" x 36", Magna-Lock Corp 16"x 36" Electromagnetic Chuck, Electromatic Neutrofier, Table TravelApprox. 47 1/2", Max Crosstravel Approx. 17 3/4", Vertical Travel ofWheelhead Approx. 19", Dust Collector

1 – GALLMEYER & LIVINGSTON F SIZE 24 X 25 X 72 SURFACE GRINDER,S/N 862472, Max Grinding Length 72", Max Grinding Width 24"

1 – BROWN & SHARPE MODEL 824 MICROMASTER SURFACEGRINDER, S/N 523-824-290, Table 8" x 32", OS Walker MagneticChuck Control, Cross Feed, Acurite 2-Axis DRO

1 – GALLMEYER & LIVINGSTON MODEL GRAND RAPIDS 18" X 60"SURFACE GRINDER, S/N A-1831860 (1964), 18" x 60" Chuck

1 – BROWN & SHARPE 8" X 24" HYDRAULIC SURFACE GRINDER,S/N 523-3824-1398, Brown & Sharpe Cycle Control, Cross Feed

1 – JACOBSEN MODEL SJ824 SURFACE GRINDER, S/N JK1017


SOLD


(22) TOOL & CUTTER GRINDERSFABRICATING • (21) BROACHING MACHINES

(22) TOOL & CUTTER GRINDERS1 – WALTER MODEL HELITRONIC 55 CNC TOOL & CUTTER

GRINDER, S/N 5696, HMC200 Control – Control Type 55RS6,M18 Probe Interface, 12 Position Holder, AMK Pumasyn Drives

1 – COLONIAL MODEL R.G. 3-84 CUTTER, S/N 54J.42-0584,Table 11.5" x 111”

1 – OLIVER 600 DRILL POINT GRINDER, S/N G8496, 2400 RPM1 – NORTEC MODEL TC-75 TAP CHAMFER GRINDER, S/N 059,

BST Precision Spindle Enclosure, 1 – G & L MODEL VP4 COMPUTERIZED DRILL POINT

GRINDER, S/N 948-0004-93, Centurion Servo System DS100Brushless Servo Drive, Turbo PC900 CPU/Input/Output

1 – G & L MODEL WINSLOWMATIC 400 DRILL POINT SPLITTER, Horizontal Head & Vertical Head Travel

2 – G & L MODEL WINSLOWMATIC 100C DRILL POINTGRINDERS, S/Ns 941-00208-86 & 941-00239-89

2 – NORMAC P-500 AUTOMATIC DRILL POINT GRINDERS,S/Ns 144 & 145, Dresser, Load/Auto/Shuttle Control

3 – FARRELL MODEL 6GA DRILL POINT GRINDERS, S/Ns 80RD1354, 80RD2299 & N/A, 2 HP

1 – CINCINNATI CUTTER GRINDER1 – SELLERS MODEL 1GA1 DRILL GRINDER1 – HYBCO MODEL 1100 GRINDER, S/N 75931 – CINCINNATI OM 2 TOOL & CUTTER GRINDER, S/N CT 6701-41 – CINCINNATI TOOL & CUTTER GRINDER, S/N 1D2T1K-741 – G & L WINSTON HCDP HELICAL DRILL POINT GRINDER3 – BROWN & SHARPE MODEL #13 UNIVERSAL TOOL

GRINDERS, S/Ns 525-13-1745, 525-13-2177 & 525-13-3038,Headstock RPM 128/195/325/540, Taper In/Ft 0 +/- 3

Partial Listing Only, Please Visit Our Websitewww.hilcoind.com

FABRICATING MACHINERY1 – ACCURSHEAR MODEL 850010 10' X 1/2" HYDRAULIC

POWER SQUARING SHEAR, S/N 2223 (1996), Front OperatedPower Back Gauge, Ball Transfer, (2) Front Stock Supports,Squaring Arm

1 – CHICAGO D&K UA10250 10' X 1/4" SHEAR, S/N DS17031 – CINCINNATI MODEL 18 – 8' X 1/4" POWER SQUARING

SHEAR, S/N N/A, Front Operated Power Back Gauge, (2) FrontStock Supports, Throat 18", NOTE: British Built

(21) BROACHING MACHINES5 – US BROACH & MACHINE MODEL 25T X 54 25 TON X 54"

STROKE VERTICAL PULL-DOWN BROACHES, S/Ns M-91744, M-91863, M-91864, M-91867 & M-92734 (1982), 60 HPMotor & Hydraulic Pump

1 – DETROIT BROACH MODEL 15 X 42 VPU 15 TON X 42"STROKE VERTICAL PULL UP BROACH, S/N M106520, Motor& Oilgear Pump

2 – DETROIT BROACH MODEL 15 X 42 VPD 15 TON X 42"STROKE VERTICAL PULL DOWN BROACHES, S/Ns 91473,91727 (Both 1990), Motor & Oilgear Pump

1 – DETROIT BROACH MODEL 15 X 36 PUP 15 TON X 36"STROKE PUSH UP POT BROACH (1990), 30 HP Motor &Hydraulic Pump, Mayfran Magnetic Roller Separator Conveyor,Panelmate Terminal, PLC Control, Jib Crane & Hoist

1 – GENERAL BROACH MODEL 15T X 42 10 TON X 42" STROKEVERTICAL PULL DOWN BROACH

5 – US BROACH & MACHINE MODEL 10T X 42" VPD 10 TON X42" STROKE VERTICAL PULL DOWN BROACHES, S/Ns M-91766, M-91767, M-91869, M-91870 & M-91871, 20 HP Motor &Oilgear Pump

1 – US BROACH & MACHINE MODEL 10T X 42 10 TON X 42"STROKE VERTICAL PULL DOWN BROACH, 20 HP Motor &Oilgear Pump

4 – DETROIT BROACH 6 TON X 42" STROKE TABLE UPBROACHES, S/Ns 955049, 955051, 955050 & 955052 (All 1995), Cutler Hammer Panelmate Terminal, Floor Standing,PLC Control

1 – AMERICAN BROACH, S/N 79169 (1993)QUANTITY OF Unused Broaching Sticks

HONES & GUN DRILLS2 – FASSLER MODEL D-250 HORIZONTAL GEAR RECTIFY /

HONES, S/Ns 31.206.039.42 & 31.207.06856 6 – EXCELLO MODEL 8HQ HORIZONTAL TYPE SINGLE

SPINDLE HONES, S/Ns H-8064, H-8065, H-8066, H-8067, H-8068 & H-8101, Stroke Approx. 16"

2 – SUNNEN AH-222E AUTOMATIC HORIZONTAL HONES 1 – TWO-SPINDLE VENT HOLE DEBURRING MACHINE, Indramat

Slide Motor, Stroke Approx. 20" 1 – NAGEL 3HS6-30 3-SPINDLE GUN DRILL, S/N 28-7132, Allen

Bradley Panelview Terminal


INSPECTION2 – DEA MODEL FDG1000/MISTRAL COORDINATE MEASURING MACHINES,

S/Ns MIS237 & MIS238 (Both 1994), DEA Tutor P Control, Renishaw PH10M Probe, ProbeS/N Y15571, Enclosure

1 – BENDIX MODEL 484 PORTAGE LAYOUT MACHINE, S/N 4771851, 50" X 70" SlottedTable, 15" 3-Jaw Chuck

1 – JONES & LAMSON MODEL FC-14 OPTICAL COMPARATOR, S/N E-249971 – STARRETT MODEL SIGMA HB400 OPTICAL COMPARATOR, S/N 3738, Quadra Chek

2000 X/Y DRO1 – OPG MODEL XL 14C 14" OPTICAL COMPARATOR, S/N XL140562, DiMetric Measuring

System with On Line Multiplier1 – JONES & LAMSON MODEL EPIC 220 20" OPTICAL COMPARATOR, S/N C-521987,

Lenses 10x / 20x / 31.25x / 50x / 62.5x / 100x, Quick Chek DRO2 – JONES & LAMSON 14" OPTICAL COMPARATORS, S/Ns E-45783 & E34800, Lenses:

10x / 20x / 31.25x / 50x / 62.5x / 100x, Table 6" x 30"1 – MITUTOYO 60" BENCH CENTERS 1 – WILSON MODEL 3DT RBP HARDNESS TESTER, S/N 271-R1 – WILSON ROCKWELL MODEL 523R DIGITAL SERIES 500 HARDNESS TESTER,

S/N 80839507QUANTITY OF Granite Plates to 48” x 72” x 12”, Micrometers, Plug Gauges, Check Gauges,Vernier Calipers, Bench Centers, Etc.

TOOL PRESETTERS1 – KELCH MODEL HYPERION 600 3-STATION TURRET TOOL PRESETTER, Zoller Monitor

– Type TFT Display, S/N 00508 (2006)3 – KELCH TYPE TRABANT 3-STATION TURRET TOOL PRESETTERS,

S/Ns 3220, 3222 & 3223 (All 1996), Kelch #382/EA9, Kelch Computer1 – PARLEC MODEL P2020 SERIES 2000 TOOL PRESETTER, S/N 13530-0497 (1997), Tool

Chek 200 Control1 – SEIBERT MODEL Z5900-701 DIGITAL TOOL PRESETTER, S/N GT3282, Fagor X &

Y Axis DRO1 – MARPOSS TOOL SETTER


AUTOMATIC SCREW MACHINES PRODUCTION EQUIPMENT • INSPECTION

AUTOMATIC SCREW MACHINES5 – ACME GRIDLEY MODEL RB8 2-5/8 8-SPINDLE AUTOMATIC

SCREW MACHINES, Bar Loader, PLC ControlQUANTITY OF Automatic Screw Machine Tooling, Includes Collets, Cams,Guard Plates, Tool Holders, Pushers, Collet Pads, Tube Liners, Gears,Cross Slides, Collet Tube Assembly, Spindle Drive Bearings, Roll Clutch,Retainers, Etc.

PRODUCTION EQUIPMENT – BALANCERS,TURNING, MILLING, FINISHING4 – KASPER 2-SPINDLE PRODUCTION TURNING LATHES, 5 HP Motor

& Hydraulic Power Unit, Samsomatic 7700 Controller4 – AGNEW 2-STATION HORIZONTAL MILLING MACHINES, Motor &

Hydraulic Power Unit, Transfer Conveyor/Loader4 – EXCELLO MODEL XLO DRILLING/MILLING SYSTEMS/FINISHING

MACHINES3 – WERTH ENGINEERING 55H-3-AL 3-SPINDLE PRODUCTION TURN-

ING LATHES2 – WERTH ENGINEERING MODEL 5-15-HNC-3AL 3-SPINDLE CNC

PRODUCTION TURNING LATHES, W.O. 4551-0284 & 4561-0284(2002) (Rebuilt), GE Fanuc Series 18i-T CNC Control, Rebuilt byMerritech Werth

2 – WERTH ENGINEERING MODEL 9-18-VNC-AL-3 3-SPINDLE CNCVERTICAL TURNING CENTERS, S/Ns 6534-0888 & 6535-0888(1988)

4 – SENECA FALLS MODEL CS50 AUTOMATIC DRILLING & CENTERINGMACHINES, S/Ns 25CS861, 25CD869, N/A, Centers Approx. 21"

QUANTITY OF Balance Engineering #STMS-48 & VHB-100-SA ProductionBalancers, Hines #HVR50-SA Balancers

By February 20th for Select Assets

Ken Planet 248-238-7988

[email protected] Reynolds 205-403-5942

[email protected]

Make an

Offer


MARKING MACHINES2 – TELESIS ECLIPSE MODEL 97478 150 WATT LASER MARKING MACHINES,

S/Ns 02411-2 (2003) & 02412 (2004), Telesis Ndi Yag Laser Unit, Class 3A LaserProduct, Eclipse Series SL1300 Laser, #SL1308TQ, S/N 5490, CW600 Power Supply,Computer & Harwork Dongle

WASHERS1 – ARTUNA MFG BELT TYPE WASHER, S/N SO2031 (2001), Width 28" x Length 12,

Cutler Hammer Panelmate Terminal1 – PROCECO MODEL PC 42-42-E-1000-2 ROTARY TURNTABLE PARTS WASHER,

S/N 97-114 (1997), Turntable Diameter 42", Work Height 42", Load Capacity 1,000Lbs, 7.5 HP Motor & Pump, Tank 1 Volume 115 US Gallons, Tank 2 Volume 30 USGallons

1 – VILO SYSTEMS TWO-STAGE BASKET TYPE PARTS WASHER (1991)1 – TWO-STAGE BELT TYPE WASHER (2003), Width 10" x Length 11', Wash & Blow-Off,

15 HP Motor & Gusher Pump, Cutler Hammer Panelmate Terminal, Carousel TypeLoader

14 – ASE/CENTRI-SPRAY/RANSOHOFF/VENTURE TWO-STAGE & THREE-STAGEBELT TYPE WASHERS, Sizes 12” Wide x 12’ Long to 48” Wide x 18’ Long,

PLANT FACILITIES8 – HELICAL DYNAMICS INC. HELI-FLO OIL & MIST COLLECTORS (Late as 2001),

Capacity from 2000 CFM to 9000 CFM1 – MONROE ENVIRONMENTAL STC-050-6 MIST COLLECTOR, S/N 9323431 (1993)2 – WHEELABRATOR DUST COLLECTORS1 – Q-AIR ECOLOGY UNIT DUST COLLECTOR2 – BAC COOLING TOWERS, 50 HP & 75 HP Motor / Pumps

COOLANT FILTRATION SYSTEMS / CENTRIFUGES1 – SUPERIOR FILTRATION MODEL SV-4-60 48" WIDE COOLANT FILTRATION

SYSTEM, S/N 1247-97 (1997), Two (2) 40 HP Motor & Hydraulic Pumps, AboveFloor Type, Panelmate Terminal

1 – HYDROMATION 50" WIDE MEDIA TYPE COOLANT FILTRATION SYSTEM,S/N 8-3848, Above Ground, Filter #HE-408

1 – FILTRA SYSTEMS MODEL ECM-105 COOLANT FILTRATION SYSTEM,S/N 1233, Width 36", Two (2) 5 HP Motors & Gusher Pumps, 1 HP Motor DragOut Conveyor

3 – BARNES MP-100 MAGNETIC & FILTER SEPARATORS, S/Ns TCSP-6699,6925 & 7521, Width 48", Tank Capacity 450 Gallons, 3 HP Motor

1 – BAZELL MODEL TSK 100A-1 MICRO SEPARATOR CENTRIFUGE, S/N100197 (1997), Mounted on Stand, Dirty Pump & Clean Pump – (2) 3 HP Motor& Pump Units, Barnes Magnetic Separator

1 – FLOWCON MODEL TSK-150/930C CENTRIFUGE, S/N 5339 (1997), System,(5) Clean Coolant Pumps, GLI #63 Conductivity Analyzer Digital MeasuringControl

4 – WESTFALIA/ALFA LAVAL CENTRIFUGES 1 – HENRY MODEL 310MV-36 CONTROL PANEL FOR FILTRATION SYSTEM,

S/N 69451 / 6007 (1997), Xycom Terminal1 – MONLAN GROUP 6 PM 3636-V6-6 COOLANT SYSTEM, S/N 02-1049, (2)

Supply Pumps, (2) Skimmer Pumps, (2) Conveyors


MARKING MACHINES • WASHERSPLANT FACILITIES • COOLANT FILTRATIONDAY 2: THURSDAY, MARCH 12TH


POWER DISTRIBUTIONBRIDGE CRANES • WELDERS

1 – COMPLETE HIGH VOLTAGE POWER DISTRIBUTION CENTER, Includes: (4) Rows ITEFeeder Breakers – 15,000 / 480 Volt, ITE Potential Transformers Hydro 0 14,400 – 120 Volt,Qty Siemens/ITE 1000 AMP/600 Volt Bustribution Busway, Catalog BDP 310 90-07593101,ABB Type DSL 206 600 Amp/60Hz Low Voltage Power Circuit Breaker Boxes, ABB TypeK600M K-Line Power Circuit Breakers, ITE Type K3000S Power Circuit Breakers, (6)Gould/ITE Back-Up Switches – Type 15HK Power Circuit Breakers, Rated 13.8 KW, MaxKV 15, Impulse KV 95, Freq 60, Available as Complete Unit or as Components

19 – ELECTRICAL SUBSTATIONS – Capacity to 3000 KVA, ABB, Ferranti Packard &Westinghouse Transformers & Back-Up Transformers (Late as 1999), Reactivar TypeBV6000 Capacitors, C-Can Rectifiers, ITE Switchgear, Substations Capacity: HV 14490 –LV 2300 / HV 14490 – LV 13110 / HV 14490 – LV 480 / HV 13800 – LV 480, SubstationsMay be Offered in Bulk or Individually

1 – COMPLETE POWER HOUSE: (2) York #YCWZ33ABO-46PA Chillers (One Installed 2001 /One Rebuilt 2004), Peabody CPDR-MT 21 ½ Boiler, Foster Wheeler Steam Boiler, AtlasCopco #GA18FF Air Compressor, Four (2) Canadian Ingersoll Rand Centac Air Compressors,Atlas Copco #ZR Air Compressor, Cummins/Onan Gen Set 350 KW Diesel Generator

POWER DISTRIBUTION /POWER HOUSE

(These Items May be Offered as Complete Units or as Individual Components)

BRIDGE CRANES1 – RICHARD WILCOX 7.5 TON CAPACITY YARD CRANE, Span

Approx. 40’, Runway Approx. 320’, Cab Control1 – MENTOR 3 TON CAPACITY SINGLE GIRDER UNDER

RUNNING BRIDGE CRANE, S/N 02-5727-1, Span 16', MainHoist 2 HP, Trolley Drive 1/4 HP, Bridge Drive 1/2 HP, Yale Hoist#KEL3-00H1053

1 – SHEPARD NILES 5 TON SINGLE GIRDER BRIDGE CRANE,S/N 70061, Span Approx. 35', 6-Way Pendant

1 – RICHARD WILCOX 1 TON SINGLE GIRDER BRIDGECRANE, Span Approx. 30', CM Series 1 Ton Electric Hoist, 2-Way Pendant

5 – PACIFIC COAST MODEL STAHLKRAN 2 TON SINGLEGIRDER BRIDGE CRANES, Span 24’, 30’ & 40', CM Hoist, 6-Way Pendant

1 – SPANMASTER 2 TON DUAL GIRDER BRIDGE CRANE, SpanApprox. 30', 6-Way Pendant

2 – 1 TON SINGLE GIRDER BRIDGE CRANES, Span Approx. 21',Manual Hoist

1 – PROVINCIAL 2 TON BRIDGE CRANE, Span Approx. 15', CM Series 635 Electric Hoist

PLANT SUPPORT2 – KENNAMETAL MODEL TOOL BOSS THREE SECTION

STORAGE SYSTEMSQUANTITY OF Interroll Roller Conveyor, S.O. 30911 & 58569,Includes: 32" Wide x 12' / 32" Wide x 10'-4" / 48" Wide x 8' / 50"Wide x 12' / 50" x 15' Roller Conveyor SectionsQUANTITY OF Staticon Type A18F20 & LA18F190 36-Volt, 250-Amp Battery ChargersQUANTITY OF Multi-Drawer Storage Cabinets: Lista / Vidmar / Nu-Era,Unused Carbide Inserts, Unused Tooling / Drills / Reamers, UnusedGleason Hobs, Unused Collets, Rotary Tables, Sine Plates, Chucks,Inspection Items, Arbor Presses, Pedestal Grinders, Drill Presses,Rigging Accessories, Welders. Etc. (Will be offered both days.)

WELDERS (OFFERED BOTH DAYS)4 – DOWN DRAFT WELDING STATIONS, 33" x 42" Steel Table 2 – LINDE TYPE CM45 CUTTING MACHINES, S/N 77B01357QUANTITY OF Lincoln Electric Model Powerwave 450 Welders, Robotic Interface, Lincoln Electric ModelIdeal Arc R3R-400 Welders, Lincoln Electric Model Ideal Arc R3S Welders, Hobart Model Mega-Arc 400400-Amp Arc Welders, Hobart 300 Amp Welders, Arcweld Model 250A CC AC/DC Arc Welder, S/N JG010138, Welding Tables, Fume Collectors, Etc.


BUSS DUCT AVAILABLELarge Quantity of 600 & 800 Amp

Plug-In Bus Duct; 1600 – 3000 Amp Cu3 Pole/3 Wire LO-X Feeder Duct

throughout 1.5 Million Sq Ft Facility

www.hilcoind.comLAB/TEST EQUIPMENT & DYNAMOMETER CELLS1 – CHATILLON MODEL HTCM MOTORIZED TEST STAND1 – LECO MODEL HF-300 CARBON SULFUR ANALYZER,

S/N 30461 – LECO MODEL 250 LAB SCALE, S/N 43111 – MODEL 17 OVEN, S/N N-5, 200°C Max1 – LECO MODEL VARIPOL VP-150 3 STATION

GRINDER/POLISHER1 – MTS DYNAMOMETER1 – GE REAR AXLE DYNAMOMETER with (3) Drives- 300 HP

& 600 HP DC Drives1 – PARKING PAWL DYNAMOMETER1 – TESTEK PLANETARY GEAR FATIGUE TESTER,

440 F.W.D. Gear1 – TINIUS OLSEN UNIVERSAL TORSION TESTER, GE

Adjustable Speed Drive 1 – HYDRAULIC TEST STAND, Includes: 20 HP Motor &

Hydraulic Power Unit, Table 8" x 22", Three (3) Flo-Tech, Inc#DRM 100 Flow Indicators, Flo-Check #PFM6 Control

QUANTITY OF Electrode Force Gauges, Federal Gauge TestStands, Fume Hoods, Hot Plate


ROLLING STOCK LAB / TEST & DYNOMOMETER CELLS

LARGE QUANTITY OF GEAR BOXES: Morse, Browning, Barnes,Delroyd, Boston, Ohio, Eberhard-Denver, David Brown, Winsmith &Camco Gear Box, Includes Assorted Gear Boxes & Spare PartsLARGE QUANTITY OF VICKERS / OILGEAR / IR-ARO / PARKER/ RACINE / CP / GUSHER / SPRAGUE PRODUCTS / PUMPS &HYDRAULIC VALVES, Includes: Crane #125/#300/#375 Valves,2" NPT Valves, Relief Valves, Flow Control Valves, Adaptors,Covers, Large Spare Parts InventoryLARGE QUANTITY OF AC Motors from 1/3 HP to 150 HP, MotorStorage Rack System

ROLLING STOCK1 – BRODERSON MODEL RTR-1803A ROUGH TERRAIN MOBILE CRANE,

S/N 137B, Diesel Engine, Meter Hours 4021 – CATERPILLAR MODEL T 300 30,000-LB CAPACITY FORKLIFT TRUCK, S/N

711662, Gas Engine, 159" Max Lift, 72" Forks, Meter Hours 1,260, Overall Height 7' 6"1 – HYSTER MODEL S120XL 12,000-LB CAPACITY FORKLIFT TRUCK,

S/N D004D01656T, Gas Engine, 2-Stage Mast, 111" Max Lift, 48" Forks, 6 Degree Tilt, Solid Tires

1 – SNORKEL LIFT MODEL A40 BOOM LIFT, 7809 Hours2 – HYSTER MODEL S120XL2 12,000 LB. CAPACITY FORKLIFTS,

S/Ns E004V02397Z & D004D10140Y, Cab Enclosure, Max LIft 112", Two-StageMast, Forks 48"

1 – HYSTER MODEL H80XM 8,000 LB CAPACITY FORKLIFT TRUCK, S/N K005D03434X, Cab Enclosure, Max Height 122", 2-Stage Mast, CascadeRotator #100D-RRB-148x48" Fork, Hours Meter 6179

5 – ELECTRIC PALLET JACKS/WALKIE PALLET TRUCKS2 – TAYLOR-DUNN MODEL B2-48 UTILITY CARTS, S/Ns 152745 & 153214, Bed 76”1 – TENNANT MODEL 8410 RIDING TYPE FLOOR SWEEPER/SCRUBBER,

S/N 12495, Hopper Raise/Lower1 – TENNANT MODEL 300000 WALK BEHIND FLOOR SCRUBBER, 24-Volt, with

MAC Battery Charger

PRIVATE TREATYOFFERINGS:


SOLD

SOLD

Forwarding Service Requested

HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved

Printed in USA • GMS4141 • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

terms of SaleAn 18% buyer's premium will be charged on all assets. The buyer'spremium will be reduced to 16% for all onsite and Hilcast Webcastbuyers for payments made by means of cash, cashier’s check, com-pany check (with bank letter of guarantee) or wire transfer within 48hours of sale close. An 18% buyer's premium will be charged for allBidSpotter purchases with no discount for prompt payment.Everything will be sold to the highest bidder for cash, in accordancewith the Auctioneer’s customary “Terms of Sale”, copies of which willbe posted on the premises of the sale and subject to additional termsannounced the day of sale. All items will be sold “as is, where-is”without any warranties, expressed or implied. Although obtained fromsources deemed reliable, the Auctioneer makes no warranty or guar-antee to the accuracy of the information herein contained. Biddersare encouraged to thoroughly inspect the items on which they intendto bid prior to sale. Absolutely no items will be removed until the dayafter the conclusion of the sale and payment is made in full. Subjectto additions, deletions and prior sale. For updated information,please visit our website at www.hilcoind.com for any changes todate, sale process, terms and conditions and list of available assets.Payment: INVoICES WILL BE EMAILED WITHIN 24 HoURS AFTERTHE AUCTIoN CLoSES. Payment is to be made to Hilco Industrial,LLC. Payment options: VISA, Mastercard Discover accepted – ifinvoice total is $2,000 or less; Wire Transfer; Certified Check; orCompany Check (with Bank letter of guarantee – see sample letterbelow). All sales are subject to sales tax. Purchasers claimingexemptions from taxes must provide proof satisfactory to theAuctioneer of their entitlement to claim such exemptions. Please seecomplete terms and conditions on our website, www.hilcoind.com.

Sample Bank Letter(Bank Name) unconditionally guarantees payment to HilcoIndustrial from (Company Name). This guarantee will be validfor purchases made at the Auction of a Major North AmericanAutomotive Manufacturer #2 on March 11-12, 2015.

FollowUs on:

A Hilco Global Company

Vested in Your Success

31555 W. Fourteen Mile Road, Suite 301Farmington Hills, MI 48334Ph: 248-254-9999Fx: 248-254-9995www.hilcoind.com

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

HilcoTM

Industrial 2-DAY WEBCAST/ONSITE AUCTION

Wednesday & Thursday, March 11th & 12thSt. Catharines, Ontario, Canada

2nd SALE IN A SERIES OF AUCTIONS

Featuring: CNC Turning, Machining & GearMachinery, Forging, Spline Rollers,

Broaching, Heat Treat, Robots, Tool Room,Fabricating, Power Distribution

tm 2-day webcast/onsite auction...cnc wire type edms 1 – seibu model ew-a7s wire type cnc...

Documents