tk108 waterproof gps tracker

8/10/2019 TK108 Waterproof GPS tracker

1/12

TK108 Waterproof GPS tracker

1


2/12

Preface

Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly.

Make sure to read this manual carefully before using this product. Please note that specification and

information are subject to changes without prior notice in this manual. Any change will be integrated in the

latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.

Content1. Summary.............................................................................................................................................................

. Applications.........................................................................................................................................................!

!. "ardware #escription.........................................................................................................................................!

$ Specs.....................................................................................................................................................................!

% &sage....................................................................................................................................................................$

%.1 S'M card installation.........................................................................................................................................$

%. (attery and )harger...........................................................................................................................................$


3/12

%.! Startup...............................................................................................................................................................%

%.$ 'nitiali*ation......................................................................................................................................................%

%.% )hange the password.........................................................................................................................................%

%.+ Authori*ation.....................................................................................................................................................%

%., Single -ocating.................................................................................................................................................+

%. Auto Track.........................................................................................................................................................+

%.1/ 0eofence........................................................................................................................................................,

%.11 Movement alert...............................................................................................................................................,

%.1 2verspeed alert................................................................................................................................................,%.1! S2S button3.....................................................................................................................................................,

%.1$ -ow battery alert.............................................................................................................................................,

%.1% Terminal 4local5 Time Setting..........................................................................................................................

%.1+Sleeping powersave mode...............................................................................................................................

%.1, 6estore factory settings ..................................................................................................................................................

%.1 0P6S setting...................................................................................................................................................

+ .)autions...............................................................................................................................................................7

, 8aults 9 The solutions.........................................................................................................................................7

1. Summary

:orking (ased on e;isting 0SM


4/12

3.2 Side face

$.Specs.

)ontent Specs.

#im. 77mm x 37mm x 23mm

:eight 50g

@etwork GSM/GPRS

(and 850/900/1800/1900Mhz

0PS chip UBLOX

0PS sensitivity 1%7d(m

0PS accuracy %m

Time To 8irst 8i; )old status !%/s

:arm status !%s

"ot status 1s

)ar charger 1$? input

%? output

:all charger 11//? input

%? output

(attery )hargeable changeable !.,? //mAh -iion battery

Standby $hours

Storage Temp. $/B) to C%B)2peration Temp. /B) to C%%B)

"umidity %D7%D noncondensing

$


5/12

8unctions3

1. 0PS and -ocation (ased Service

-ocation (ased service also named A0PS= when tracker in underground or tunnel =can get location by A0PS.

. 6eal time tracking

6eal time tracking it by cell phone and platform . Also can support get location every % seconds= and the 0PS

accuracy is %m .

!. )heck the history of route on platform)an check and replay within one year history of route of device =by web monitor center

$.Monitoring and communication

)an hear the voice around the tracker by cell phone . Also support communication with the tracker by cell

phone 42EM5

%.S2S Alarm

S2S button =when user have emergency = press the S2S button =the tracker will send Fhelp me F SMS to all

authori*ed phone number and monitoring web platform.

+. Power Saving Mode

The device go into standby mode when there isnGt vibration for ! minutes = it will go into working mode when

it feel vibration

,.0oogle map on mobile

)heck the location with google map on mobile.

. 0eofence and movement alert

Set up a geofence for the unit to restrict its movements within a district =unit will send a message to the

authori*ed numberwhen it breaches the district..

7.2verspeed alert

set up the speed as your reHuirement= and will get the alert when overspeed.

1/.-ow (attery Alarm

5.Usage

Please charge 12hours at frst use.

Insert SIM card in right way. Please put the unit outside and make sure the trademark

side acing up.

Confrm your SIM card have calling send SMS !P"S unction.

Confrm your SIM card have enough #alance $money%.

Confrm your SIM card can show caller I& and don not use call orwarding unction.

5.1 SIM card installation

Make sure that there is no call transfer and call display is on= and P'@ code off. The SMS message must in Te;tformat= canGt be identified for P#& format.

5.1.12pen the rear cover= remove the screws by screwdriver.

5.1.2 8orward push and open the metal piece= put the S'M card into the card slot= and press the metal piece to

its original position= push it backward.

5.1 SIM card installation

Make sure that there is no call transfer and call display is on= and P'@ code off. The SMS message must in Te;tformat= canGt be identified for P#& format.

5.1.12pen the rear cover= remove the screws by screwdriver.

%


6/12

5.1.2 put the S'M card into the card slot.

5.2Battery and Charger

#o charge the battery to capacity in 1 hours for first time. Please use the battery and charger provided by

the manufacturer. This unit adopts builtin -iion battery= and full battery can standby / hours. After first use=

the battery usually should be charged fully in !% hours.

Cautions%

a% 8or itGs -iion battery= which contains harmful chemicals and may burst= please donGt bump= puncture itviolently and keep it off fire.

&%Please charge the battery in time to keep it working normally.

5.3Startup

Put the S'M card and battery in place.

Turn on the unit outdoors by pressing the Fon


7/12

green -E# for 0P6S working status

Status of indicator Meaning

Slow flash 4flash 1s after every s5 0SM < 0P6S conversation start

)ontinuously in bright status @o 0P6S signal

0reen -ed off #evice fault or dormant

(lue -E# for 0PS working status

Status of indicator Meaning

Slow flash 4flash 1s after every s5 0PS location successful)ontinuously in bright status Searching 0PS signal

(lue led off #evice fault or dormant

6ed -E# for power charging status

1.Google link: click link, h!"! i# m$% &h!n positioning ok no map

means no positioning.

2.:! GPS #ign$l 'k(: n' GPS #ign$l

3.2"13#"$#3" 2":5%:15:h! l$# im! "!c!i)! GPS #ign$l(

%.Spd:"""k&'h: h! #%!!* '+ "$ck!" "$n(

5.Bat:( $!"- $l$nc!h! "$ng! i# +"'m 1 ' 9

(.I):%1"2"""*5+: . c'*! '+ *!)ic!#!* +'" c'nn!c "$cking &!#i! '"

PP*.S1+G"%

pl&n

%(""1 GSM '%!"$'" *$$

$.,ac

+51(

cellid:235+( LBS *$$

5.%Initiali-ation

Send FbeginCpasswordI in SMS to the unit= it will reply Fbegin okI and initiali*e all the settings. 4#efault

password3 1!$%+5

8or e;ample= send SMSF begin1!$%+I to the tracker via a cell phone= 'f succeeded=

if will replyFbegin okI.

5.5Change the passord

'.'.1 Set Password3 Send sms3 FpasswordCold passwordCspaceCnew passwordI to the unit to change the

password.

8or E;ample= pls send sms3 F password1!$%+ //////I to terminal device= it will reply sms3 Fpassword 2JI.@ew password ////// changed in success.

'.'.2(e sure keep the new password in mind= you have to upload the software to restore the original setting in

,

Status of indicator Meaning6ed led on all the time )harging

red led flash -ow battery red led off 8ull battery or charged full


8/12

case of losing the new password.

'.'.3Make sure the new password is in + digits Arabic numbers= or the tracker can not recogni*e the password.

'.'.$Make sure that all the symbolFCIin sms commends is just for Huick understanding= which donGt need to

enter FCI in sms= and FspaceI means press the spacebar button of the cell phone.

5.(!uthori-ation'.(.1Send SMS F adminCpasswordCspaceCcell phone numberI to set up a authori*ed number. The other

authori*ed numbers should be set by the first authori*ed number. 'f the number is successfully authori*ed= the

unit will reply Fadmin okKI in SMS.

'.(.2Send SMSF noadminCpasswordCspaceCauthori*ed numberI to delete the authori*ed number.

for e;ample= please send F admin1!$%+ 1!+%,7/1/I to tracker to set 1!+%,7/1/ as an authori*ed

number.

5.(.5:hen the authori*ed number call the device= it will hang up your

phone and reply a realtime latitude and longitude information= as below3

5.*Single ,ocating

'.).1 'f there is no authori*ed number= when any number dials up theunit= it will report a 0eoinfoL 'f there is already an authori*ed number=

then it will not respond when an unauthori*ed number calls it up.

'.).2Single message inHuires the latitude and longitude information= any telephone number can send instruction

FwhereI to the eHuipment= then the eHuipment will reply the latitude and longitude information to this telephone

.

'.).3:hen an authori*ed number dials up the unit= it will hang up and report a realtime 0eoinfo as below3

Tracking location= :hen 0PS signals is weak= the position of latitude and longitude included in the SMS is the

position that the tracker received 0PS signals at last. 'f it is different with its e;act current location= pay

attention to check the time included in the SMS you got.

5.$!uto /rack

'.8.1 Send SMS command Ft/!/s//%nCpasswordI to the tracker device= it will report the Fno replyI at !/s

intervals for % times. 4s3second= m3minute= h3hour5. This command setting must be in ! digits and the ma;imum

value is %%.

'.8.2 &nlimited times auto track3Send SMS Ft/!/snCpasswordI to the tracker device= it will reply the FnoreplyI continuously at !/ seconds intervals.

'.8.3 )ancellation3 Send SMS FnotnCpasswordI to the tracker device= it will report the Fnotn okI.

@ote3 the interval must not less than /s.


9/12

5.1"Geo#0ence

Set up a geofence for the unit to restrict its movements within a district.

The unit will send the message to the authori*ed numbers when it breaches

the district.

'.10.1Set up3 :hen the unit stays immobile in a place for !1/ minutes=

the user can Send SMS3 FstockadeCpasswordCspaceClatitude=longitudeL

latitude=longitudeI to unit to set the restricted district.6emark3 The first latitude9longitude is coordinate of the top left corner of

the 0eofence= while the second latitude9longitude is the coordinate of the bottom right corner.

'.10.2)ancel3 Send SMS3I nostockadeCpasswordI to deactivate this function=tracker will reply Fnostockade

okI.

5.11Moe&ent alert

'.11.1 Set up3 :hen the unit stays immobile in a place for !1/ minutes= the user can send SMS3

FmoveCpasswordI to the unit= then the unit will reply Fmove okKI. 'n case of such a movement the unit

default distance is %//M = it will send SMS FMove A-A6MC -atitude and longitudeI to the authori*ed

number

'.11.2)ancel3 Send SMS3I nomoveCpasswordI to deactivate the movement alert= tracker will reply Fnomove

okI.

5.12 2verspeed alert3

'.12.1Set up3 Send SMS3 FspeedCpasswordCspaceC//I to the unit 4suppose the

speed is /km


10/12

5.13.2S2S call mode

Set3 Send SMS FsoscallCpasswordI= the unit will replyIsoscall okI.

Press the S2S for ! seconds= it will send Fhelp meKC -atitude and longitudeI to all the authori*ed numbers= then

it will call the S2S number= if need to talk= the user need to plug the headphone.

5.1%-ow battery alert

:hen 0PS device battery is going to be about !.,?= it will send SMS3 Fbat3lI at !/ minutes interval.

5.15Terminal 4local5 Time SettingSend SMS FtimeCspaceC*oneCpasswordCspaceClocal timeI.

8or e;ample= Send SMS Ftime *one1!$%+ I 4time *one of )hina5.

'f the local time *one is negative as F!I= then it should set as SMS3 Ftime *one1!$%+ !I.

5.1(Sleeping powersave mode

2n normal status= when the unit stoped over 1/minutes= it will change to sleeping mode= on this mode= the

power consumption is $mah


11/12

@ote3 't is effective sending by authori*ed number

Send SMS commandFshockCpasswordI= the unit will reply Fshock ok.I

)ancel3 Send SMS command FnoshockCpasswordI= the unit will reply Fnoshock ok.I

5(186estore factory settings

@ote3 't is effective sending by authori*ed number

Send SMS command FformatI= the unit will reply FThe tracher will immediateiy restore the factory settings.All previous

settings will be canceled.I

5.1+0P6S setting

&ser must send SMS via cell phone to set up 'P= port and AP@ before starting 0P6S.

'.1+.1Setting up AP@'.1+.1.1AP@ standards for Access Point @ame and differs from country to country. 8or more information

about the local AP@= inHuire with your local 0P6S network operator.

'.1+.1.2Te;t the tracker a SMS FapnCpassword C Space C your local AP@I via a cell phone and if succeeded

in setup= the tracker will return the message Fapn okI.

'.1+.1.3 e.g. send SMS command Fapn1!$%+ cmnetI. 'f succeeded= Fapn okI is returned by the tracker in

SMS.

@otes3 1!$%+ refer to password of tracker and )M@ET is the AP@ of )hina Mobile 42ne of 0SM 2perator in

china5.

5(19(1(4Set IP Send SMS commandadminip12'()* *+.1,1.1)+.1+2 --++ 'f succeeded= Fadminip okI

+ .)autions

Please comply with the instructions to e;tend the unit life3

(.1Jeep the unit dry. Any liHuid= i.e. rain= moisture= may destroy or damage the inside circuitry.

(.2#onGt use 9 store the unit in dusty places.

(.3#onGt put the unit in overheated or overcooled places.

(.$"andle carefully. #onGt vibrate or shake it violently.

(.')lear the unit with a piece of dry cloth. #onGt clean in chemicals= detergent.

(.(#onGt paint the unit= this may cause some foreign materials left in between the parts.(.)#onGt disassemble or refit the unit.

(.8Please use the battery and charger provided by manufacturer. &sing other batteries and chargers will cause

unwanted situation.

11


12/12

7(,aults - T*e solutions

5aults Solution

Startup 8ail )heck the battery and see if it is fully charged orcorrectly installed.

"ang up 8ail 'n e;istence of an authori*ed number= an unauthori*ednumber dials up the unit. Please initiali*e the unit and reset upthe authori*ed numbers.

Monitoring failure Please check the authori*ation number is set to the correct time

@o 0SM Signal Please make sure S'M )ard is 0SM @et and installed correctlyL also calldisplay should be onL but no call transfer and P'@ code off.

1

tk108 waterproof gps tracker

Documents