tiÊu chuẨn mỚi thÁng 02/2017lib.iuh.edu.vn/wp-content/uploads/2017/06/bantin_tieu... · 2017....
TRANSCRIPT
1
TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH
TRUNG TÂM THÔNG TIN – THƯ VIỆN
TIÊU CHUẨN MỚI THÁNG 02/2017
QUY CHUẨN KỸ THUẬT VIỆT NAM (QCVN) ................................................. 1
Viễn thông – Đường sắt – Phương tiện thủy .......................................................... 1
TIÊU CHUẨN NƯỚC NGOÀI ................................................................................ 2
Công nghệ thông tin .............................................................................................. 2
Điện tử- Thiết bị điện tử ........................................................................................ 2
Ô tô - Giao thông – Vận tải ................................................................................... 6
Tàu thủy – Hàng hải .............................................................................................. 7
Máy bay và Vũ trụ ................................................................................................ 7
Cơ khí – Chế tạo ...................................................................................................... 8
Cần trục .................................................................................................................... 8
Luyện kim – Sản phẩm kim loại ............................................................................. 8
Vật liệu xây dựng – Thiết bị và máy móc xây dựng ............................................... 9
Vật liệu cách nhiệt – Cách điện ............................................................................. 10
Chất dẻo – Cao su .................................................................................................. 11
Phụ kiện đường ống cấp nước – thoát nước ......................................................... 11
Hóa chất ................................................................................................................. 12
Hạt nhân ................................................................................................................. 13
Dầu mỏ ................................................................................................................... 13
Nhiên liệu sinh học rắn .......................................................................................... 13
Sơn và vecni........................................................................................................... 13
Da – May mặc ..................................................................................................... 14
Gốm sứ ................................................................................................................... 14
Dầu và mỡ động vật và thực vật ............................................................................ 15
Gia vị ..................................................................................................................... 15
Bao bì Y tế - Bao bì thực phẩm .......................................................................... 15
Tinh dầu ............................................................................................................... 15
Thiết bị y tế - Chăm sóc sức khỏe ....................................................................... 16
Chất lượng đất – Trầm tích .................................................................................. 16
Tài liệu hướng dẫn trong sản xuất, kinh doanh .................................................... 16
Thử nghiệm – Phân tích ......................................................................................... 17
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
QUY CHUẨN KỸ THUẬT VIỆT NAM (QCVN)
Viễn thông – Đường sắt – Phương tiện thủy Trở về đầu trang
2
1 QCVN 93:2016/BGTVT Quy chuẩn kỹ thuật quốc gia về vận hành, bảo trì
đường sắt đô thị
24
2 QCVN 95:2016/BGTVT Quy chuẩn kỹ thuật quốc gia về phân cấp và đóng
phương tiện thủy nội địa chế tạo bằng vật liệu
polypropylen copolyme
58
3 QCVN 108:2016/BTTTT Quy chuẩn kỹ thuật quốc gia về phao chi báo vị trí cá
nhân hoạt động trên băng tần 406,0 MHz đến
406,1MHz
35
TIÊU CHUẨN NƯỚC NGOÀI
Công nghệ thông tin Trở về đầu trang
4 BS ISO/IEC 14776-
323:2017
Information technology. Small computer system
interface (SCSI). SCSI Block Commands. 3 (SBC-3)
346
5 BS ISO/IEC 2382-
37:2017 Replace: BS
ISO/IEC 2382-37:2012
Information technology. Vocabulary. Biometrics 38
6 ISO/TS 13399-310:2017 Cutting tool data representation and exchange -- Part
310: Creation and exchange of 3D models -- Turning
tools with carbide tips.
34
7 ISO 19594:2017 Graphic technology -- Test method for the
determination of the binding strength for perfect-
bound products -- Page-pull test working upwards
14
8 ISO/IEC 14776-262:2017 Information technology -- Small computer system
interface (SCSI) -- Part 262: SAS protocol layer - 2
(SPL-2)
785
9 ISO/IEC 30122-2:2017 Information technology -- User interfaces -- Voice
commands -- Part 2: Constructing and testing
5
10 ISO/IEC 2382-37:2017
Replace: ISO/IEC 2382-
37:2012
Information technology -- Vocabulary -- Part 37:
Biometrics
27
11 PD IEC/TR 62453-
62:2017
Field device tool (FDT) interface specification. Field
device tool (FDT) styleguide for common language
infrastructure
46
12 PD IEC/TS 62720:2017
Replace: PD IEC/TS
62720:2013
Identification of units of measurement for computer-
based processing
90
Điện tử- Thiết bị điện tử Trở về đầu trang
13 ASTM E720-16 Replace:
ASTM E720-11
Standard Guide for Selection and Use of Neutron
Sensors for Determining Neutron Spectra Employed in
Radiation-Hardness Testing of Electronics
12
14 ASTM E2566-17
Replace: ASTM E2566-
08
Standard Test Method for Determining Visual Acuity
and Field of View of On-Board Video Systems for
Teleoperation of Robots for Urban Search and Rescue
Applications
6
3
15 ASTM D6120 -
97(2017)e1 Replace:
ASTM D6120-97(2012)
Standard Test Method for Electrical Resistivity of
Anode and Cathode Carbon Material at Room
Temperature
3
16 BS EN 50332-3:2017 BS EN 50332-3 Sound system equipment: headphones
and earphones associated with personal music players
- Maximum sound pressure level measurement
methodology. Part 3: Measurement method for sound
dose management
18
17 BS EN 61360-6:2017 BS EN 61360-6 Standard data element types with
associated classification scheme for electric
components. Part 6: IEC Common Data Dictionary
(IEC CDD) quality guidelines
44
18 BS EN 62841-3-4:2016
Replace: BS EN 61029-2-
4:2011
Electric motor-operated hand-held tools, transportable
tools and lawn and garden machinery. Safety.
Particular requirements for transportable bench
grinders
32
19 BS IEC 62873-1:2017 Residual current operated circuit-breakers for
household and similar use. Outline of blocks and
modules for residual current device standards
20
20 IEC 61800-3:2017
Replace: IEC 61800-
3:2017
Adjustable speed electrical power drive systems - Part
3: EMC requirements and specific test methods
386
21 IEC 60335-2-
99/AMD1:2017 Replace:
IEC 60335-2-99:2003
Amendment 1 - Household and similar electrical
appliances - Safety - Part 2-99: Particular requirements
for commercial electric hoods
20
22 IEC 61391-1/AMD1:2017
Replace: IEC 61391-
1:2006
Amendment 1 - Ultrasonics - Pulse-echo scanners -
Part 1: Techniques for calibrating spatial measurement
systems and measurement of point-spread function
response
26
23 IEC 60335-2-
49/AMD2:2017
Amendment 2 - Household and similar electrical
appliances - Safety - Part 2-49: Particular requirements
for commercial electric appliances for keeping food
and crockery warm
23
24 IEC 60335-2-
50/AMD2:2017 Replace:
IEC 60335-2-
50:2002+AMD1:2007
CSVd
Amendment 2 - Household and similar electrical
appliances - Safety - Part 2-50: Particular requirements
for commercial electric bains-marie
23
25 IEC 60335-2-
64/AMD2:2017 Replace:
IEC 60335-2-
64:2002+AMD1:2007
CSV
Amendment 2 - Household and similar electrical
appliances - Safety - Part 2-64: Particular requirements
for commercial electric kitchen machines
19
26 IEC 60974-
1:2017 Replace: IEC
Arc welding equipment - Part 1: Welding power
sources.
299
4
60974-1:2012
27 IEC 61076-2-113:2017 Connectors for electronic equipment - Product
requirements - Part 2-113: Circular connectors - Detail
specification for connectors with M12 screw locking
with power and signal contacts for data transmission
with frequency up to 100 MHz
72
28 IEC 61076-3-122:2017
Replace: IEC PAS 61076-
3-122:2015
Connectors for electronic equipment - Product
requirements - Part 3-122: Detail specification for 8-
way, shielded, free and fixed connectors for I/O and
Gigabit Ethernet applications in harsh environments
32
29 IEC 60826:2017 Replace:
IEC 60826:2017
Design criteria of overhead transmission lines 209
30 IEC 60287-2-3:2017 Electric cables - Calculation of the current rating - Part
2-3: Thermal resistance – Cables installed in ventilated
tunnels
50
31 IEC 61709:2017 Replace:
IEC 61709:2017
Electric components - Reliability - Reference
conditions for failure rates and stress models for
conversion
373
32 IEC 62841-2-10:2017 Electric motor-operated hand-held tools, transportable
tools and lawn and garden machinery - Safety - Part 2-
10: Particular requirements for hand-held mixers
44
33 IEC 62841-2-21:2017 Electric motor-operated hand-held tools, transportable
tools and lawn and garden machinery - Safety - Part 2-
21: Particular requirements for hand-held drain
cleaners
36
34 IEC 60695-1-
30:2017 Replace: IEC
60695-1-30:2008
Fire hazard testing - Part 1-30: Guidance for assessing
the fire hazard of electrotechnical products -
Preselection testing process - General guidelines
31
35 IEC
62606:2013+AMD1:2017
Replace: IEC
62606:2013/AMD1:2017
General requirements for arc fault detection devices 693
36 IEC 62895:2017 High Voltage Direct Current (HVDC) power
transmission - Cables with extruded insulation and
their accessories for rated voltages up to 320 kV for
land applications - Test methods and requirements
140
37 IEC 62287-
2:2017 Replace: IEC
62287-2:2013
Maritime navigation and radiocommunication
equipment and systems - Class B shipborne equiment
of the automatic identification system (AIS) - Part 2:
Self-organising time division multiple access
(SOTDMA) techniques
92
38 IEC 60838-
1:2016+AMD1:2017
Replace: IEC 60838-
1:2016/AMD1:2017
Miscellaneous lampholders - Part 1: General
requirements and tests
162
5
39 IEC 60793-1-60:2017 Optical fibres - Part 1-60: Measurement methods and
test procedures - Beat length
12
40 IEC 60793-1-61:2017 Optical fibres - Part 1-61: Measurement methods and
test procedures - Polarization crosstalk
10
41 IEC 60793-2-70:2017 Optical fibres - Part 2-70: Product specifications -
Sectional specification for polarization-maintaining
fibres
19
42 IEC 62670-3:2017 Photovoltaic concentrators (CPV) - Performance
testing - Part 3: Performance measurements and power
rating
85
43 IEC 60884-2-5:2017
Replace: IEC 60884-2-
5:1995
Plugs and socket-outlets for household and similar
purposes - Part 2-5: Particular requirements for
adaptors
45
44 IEC 62351-9:2017 Power systems management and associated
information exchange - Data and communications
security - Part 9: Cyber security key management for
power system equipment
86
45 IEC TS 62239-2:2017 Process management for avionics - Management plan -
Part 2: Preparation and maintenance of an electronic
COTS assembly management plan
64
46 IEC 61960-3:2017 Secondary cells and batteries containing alkaline or
other non-acid electrolytes - Secondary lithium cells
and batteries for portable applications - Part 3:
Prismatic and cylindrical lithium secondary cells and
batteries made from them
46
47 IEC 62133-1:2017 Secondary cells and batteries containing alkaline or
other non-acid electrolytes - Safety requirements for
portable sealed secondary cells, and for batteries made
from them, for use in portable applications - Part 1:
Nickel systems
44
48 IEC 62133-2:2017 Secondary cells and batteries containing alkaline or
other non-acid electrolytes - Safety requirements for
portable sealed secondary lithium cells, and for
batteries made from them, for use in portable
applications - Part 2: Lithium systems
94
49 IEC 62619:2017 Secondary cells and batteries containing alkaline or
other non-acid electrolytes - Safety requirements for
secondary lithium cells and batteries, for use in
industrial applications
61
50 IEC TR 62660-4:2017 Secondary lithium-ion cells for the propulsion of
electric road vehicles - Part 4: Candidate alternative
test methods for the internal short circuit test of IEC
62660-3
34
51 IEC 62951-1:2017 Semiconductor devices - Flexible and stretchable
semiconductor devices - Part 1: Bending test method
16
6
for conductive thin films on flexible substrates
52 IEC 60749-5:2017
Replace: IEC 60749-
5:2003
Semiconductor devices - Mechanical and climatic test
methods - Part 5: Steady-state temperature humidity
bias life test
10
53 IEC 60747-16-1:2001
+AMD1:2007
+AMD2:2017 Replace:
IEC 60747-16-
1:2001/AMD2:2017
Semiconductor devices - Part 16-1: Microwave
integrated circuits – Amplifiers
236
54 IEC 60317-0-10:2017 Specifications for particular types of winding wires -
Part 0-10: General requirements - Polyester glass-fibre
wound fused, unvarnished, or resin or varnish
impregnated, bare or enamelled round copper wire
41
55 IEC 60317-70:2017 Specifications for particular types of winding wires -
Part 70: Polyester glass-fibre wound fused,
unvarnished or resin or varnish impregnated, bare or
enamelled round copper wire, temperature index 155
21
56 IEC 60317-71:2017 Specifications for particular types of winding wires -
Part 71: Polyester glass-fibre wound fused and resin or
varnish impregnated, bare or enamelled round copper
wire, temperature index 180
21
57 IEC 60317-72:2017 Specifications for particular types of winding wires -
Part 72: Polyester glass-fibre wound fused, silicone
resin or varnish impregnated, bare or enamelled round
copper wire, temperature index 200
21
58 IEC 60669-1:2017
Replace: IEC 60669-
1:2017
Switches for household and similar fixed-electrical
installations - Part 1: General requirements
445
59 PD IEC/TR 62343-6-
6:2017 Replace: PD
IEC/TR 62343-6-6:2011
Dynamic modules. Design guide. Failure mode effect
analysis for optical units of dynamic modules
34
60 PD IEC/TR 61000-2-
5:2017 Replace: PD
IEC/TR 61000-2-5:2011
Electromagnetic compatibility (EMC). Environment.
Description and classification of electromagnetic
environments
150
61 PD IEC/TR 61869-
100:2017
Instrument transformers. Guidance for application of
current transformers in power system protection
140
Ô tô - Giao thông – Vận tải Trở về đầu trang
62 BS ISO 11898-2:2016 BS ISO 11898-2 Road vehicles — Controller area
network (CAN). Part 2: High-speed medium access
unit
42
63 IEC 61851-
1:2017 Replace: IEC
61851-1:2010
Electric vehicle conductive charging system - Part 1:
General requirements
287
64 IEC TS 61375-2-4:2017 Electronic railway equipment - Train communication 88
7
network (TCN) - Part 2-4: TCN application profile
65 JIS D 5716:2016 Emergency escape tools for automobile 12
Tàu thủy – Hàng hải Trở về đầu trang
66 BS ISO 13643-1:2017
Replace: BS ISO 13643-
1:2013
Ships and marine technology. Manoeuvring of ships.
General concepts, quantities and test conditions
50
67 BS ISO 13643-2:2017
Replace: BS ISO 13643-
2:2013
Ships and marine technology. Manoeuvring of ships.
Turning and yaw checking
34
68 BS ISO 13643-4:2017
Replace: BS ISO 13643-
4:2013
Ships and marine technology. Manoeuvring of ships.
Stopping, acceleration, traversing
20
69 BS ISO 13643-5:2017
Replace: BS ISO 13643-
5:2013
Ships and marine technology. Manoeuvring of ships.
Submarine specials
30
70 BS ISO 18139:2017 Ships and marine technology. Globe valves for use in
low temperature applications. Design and testing
requirements
28
71 ISO 13643-1:2017
Replace: ISO 13643-
1:2013
Ships and marine technology -- Manoeuvring of ships
-- Part 1: General concepts, quantities and test
conditions
41
72 ISO 13643-2:2017
Replace: ISO 13643-
2:2013
Ships and marine technology -- Manoeuvring of ships
-- Part 2: Turning and yaw checking
24
73 ISO 13643-3:2017
Replace: ISO 13643-
3:2013
Ships and marine technology -- Manoeuvring of ships
-- Part 3: Yaw stability and steering
20
74 ISO 13643-4:2017
Replace: ISO 13643-
4:2013
Ships and marine technology -- Manoeuvring of ships
-- Part 4: Stopping, acceleration, traversing
10
75 ISO 13643-5:2017
Replace: ISO 13643-
5:2013
Ships and marine technology -- Manoeuvring of ships
-- Part 5: Submarine specials
21
76 ISO 13643-6:2017
Replace; ISO 13643-
6:2013
Ships and marine technology -- Manoeuvring of ships
-- Part 6: Model test specials
43
77 ISO 18139:2017 Ships and marine technology -- Globe valves for use
in low temperature applications -- Design and testing
requirements
17
78 ISO 20519:2017 Ships and marine technology -- Specification for
bunkering of liquefied natural gas fuelled vessels
39
Máy bay và Vũ trụ Trở về đầu trang
79 ISO 11218:2017 Replace: Aerospace -- Cleanliness classification for hydraulic 2
8
ISO 11218:1993 fluids
80 ISO/TR 20590:2017 Space systems - Debris mitigation design and
operation manual for launch vehicle orbital stages
33
Cơ khí – Chế tạo Trở về đầu trang
81 ASTM F1315-17
Replace: ASTM F1315-
00(2014)
Standard Test Method for Density of a Sheet Gasket
Material
2
82 BS EN ISO 1938-2:2017 Geometrical product specifications (GPS).
Dimensional measuring equipment. Reference disk
gauges
22
83 ISO 1101:2017 Replace:
ISO 1101:2012
Geometrical product specifications (GPS) --
Geometrical tolerancing -- Tolerances of form,
orientation, location and run-out
145
84 ISO 14728-1:2017
Replace: ISO 14728-
1:2004
Rolling bearings -- Linear motion rolling bearings --
Part 1: Dynamic load ratings and rating life
14
85 ISO 14728-2:2017
Replace: ISO 14728-
2:2004
Rolling bearings -- Linear motion rolling bearings --
Part 2: Static load ratings
11
86 ISO 1660:2017 Replace:
ISO 1660:1987
Geometrical product specifications (GPS) --
Geometrical tolerancing -- Profile tolerancing
45
87 ISO 2250:2017 Replace:
ISO 2250:2009
Finishing reamers for Morse and metric tapers, with
cylindrical shanks and Morse taper shanks
4
88 ISO 9013:2017 Replace:
ISO 9013:2002
Thermal cutting -- Classification of thermal cuts --
Geometrical product specification and quality
tolerances
28
89 ISO/TR 15608:2017
Replace; ISO/TR
15608:2013
Welding -- Guidelines for a metallic materials
grouping system
7
Cần trục Trở về đầu trang
90 BS ISO 4302:2016 Cranes. Wind load assessment 32
Luyện kim – Sản phẩm kim loại Trở về đầu trang
91 ASTM A796/A796M-17
Replace: ASTM
A796/A796M-15a
Standard Practice for Structural Design of Corrugated
Steel Pipe, Pipe-Arches, and Arches for Storm and
Sanitary Sewers and Other Buried Applications
24
92 ASTM A964/A964M-17
Replace: ASTM
A964/A964M-03(2011)
Standard Specification for Corrugated Steel Box
Culverts
12
93 ASTM A761/A761M-17
Replace: ASTM
A761/A761M-16a
Standard Specification for Corrugated Steel Structural
Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-
Arches, and Arches
12
94 ASTM A879/A879M- Standard Specification for Steel Sheet, Zinc Coated by 3
9
12(2017) Replace: ASTM
A879/A879M-12
the Electrolytic Process for Applications Requiring
Designation of the Coating Mass on Each Surface
95 ASTM A579/A579M-17
Replace: ASTM
A579/A579M-04a
Standard Specification for Superstrength Alloy Steel
Forgings
7
96 ASTM E2823-17
Replace: ASTM E2823-
11
Standard Test Method for Analysis of Nickel Alloys
by Inductively Coupled Plasma Mass Spectrometry
(Performance-Based)
8
97 BS EN 15384-2:2017
Replace: BS EN
15384:2007
Packaging. Test method to determine the porosity of
the internal coating of flexible aluminium tubes.
Copper sulphate test
12
98 BS EN ISO 8502-3:2017
Replace: BS EN ISO
8502-3:2000
Preparation of steel substrates before application of
paints and related products. Tests for the assessment of
surface cleanliness. Assessment of dust on steel
surfaces prepared for painting (pressure-sensitive tape
method)
20
99 ISO 4885:2017 Replace:
ISO 4885:1996
Ferrous materials -- Heat treatments – Vocabulary 41
100 ISO 8401:2017 Replace:
ISO 8401:1986
Metallic coatings -- Review of methods of
measurement of ductility
38
101 ISO 16120-2:2017
Replace: ISO 16120-
2:2011
Non-alloy steel wire rod for conversion to wire -- Part
2: Specific requirements for general purpose wire rod
8
102 JIS G 3468:2016 Large diameter welded stainless steel pipes 24
103 JIS G 3448:2016 Light gauge stainless steel tubes for ordinary piping 10
104 JIS G 3459:2016 Stainless steel pipes 33
Vật liệu xây dựng – Thiết bị và máy móc xây dựng Trở về đầu trang
105 ASTM D3105-17
Replace: ASTM D3105-
08
Standard Index of Methods for Testing Elastomeric
and Plastomeric Roofing and Waterproofing Materials
5
106 ASTM C1623-17
Replace: ASTM C1623-
16
Standard Specification for Manufactured Concrete
Masonry Lintels
16
107 ASTM D5101-12(2017)
Replace: ASTM D5101-
12
Standard Test Method for Measuring the Filtration
Compatibility of Soil-Geotextile Systems
8
108 ASTM C803/C803M-17
Replace: ASTM
C803/C803M-03(2010)
Standard Test Method for Penetration Resistance of
Hardened Concrete
4
109 ASTM D8052/D8052M-
17
Standard Test Method for Quantification of Air
Leakage in Low-Sloped Membrane Roof Assemblies
6
110 ASTM E108 -16e1
Replace: ASTM E108-16
Standard Test Methods for Fire Tests of Roof
Coverings
13
10
111 ASTM E108-17 Replace:
ASTM E108-16e1
Standard Test Methods for Fire Tests of Roof
Coverings
13
112 BS EN 302-8:2017
Replace: BS EN 15416-
2:2007
Adhesives for load-bearing timber structures. Test
methods. Static load test of multiple bond line
specimens in compression shear
20
113 BS EN 16908:2017 Cement and building lime. Environmental product
declarations. Product category rules complementary to
EN 15804
28
114 BS ISO 8643:2017
Replace: BS 6912-1:1997,
ISO 8643:1997
Earth-moving machinery. Hydraulic excavator and
backhoe loader lowering control device. Requirements
and tests
22
115 BS ISO 6405-1:2017
Replace: BS ISO 6405-
1:2004+A1:2010
Earth-moving machinery. Symbols for operator
controls and other displays. Common symbols
100
116 BS ISO 18523-1:2016 Energy performance of buildings. Schedule and
condition of building, zone and space usage for energy
calculation. Non-residential buildings
264
117 BS EN 16282-2:2016 Equipment for commercial kitchens. Components for
ventilation in commercial kitchens. Kitchen ventilation
hoods; design and safety requirements
22
118 BS EN 16282-4:2016 Equipment for commercial kitchens. Components for
ventilation in commercial kitchens. Air inlets and
outlets; design and safety requirements
16
119 BS EN 1253-5:2017
Replace: BS EN 1253-
5:2003
Gullies for buildings. Gullies with light liquids closure 14
120 BS EN 16383:2016 Thermal insulation products for building applications.
Determination of the hygrothermal behaviour of
external thermal insulation composite systems with
renders (ETICS)
18
121 BS EN 16573:2017 Ventilation for Buildings. Performance testing of
components for residential buildings. Multifunctional
balanced ventilation units for single family dwellings,
including heat pumps
64
122 ISO 8643:2017 Replace:
ISO 8643:1997
Earth-moving machinery -- Hydraulic excavator and
backhoe loader lowering control device --
Requirements and tests
11
123 JIS R 5201:2015 Physical testing methods for cement 101
Vật liệu cách nhiệt – Cách điện Trở về đầu trang
124 ASTM C1728-17
Replace: ASTM C1728-
13
Standard Specification for Flexible Aerogel Insulation 5
125 ASTM D202 -17 Replace: Standard Test Methods for Sampling and Testing 35
11
ASTM D202-08 Untreated Paper Used for Electrical Insulation
Chất dẻo – Cao su Trở về đầu trang
126 ASTM D4528 -88(2017)
Replace: ASTM D4528-
88(2012)
Standard Classification for Rubber Compounding
Materials#x2014;Sulfur
127 ASTM D4295-89(2017)
Replace: ASTM D4295-
89(2012)
Standard Classification for Rubber Compounding
Materials#x2014;Zinc Oxide
128 ASTM F1743-17
Replace: ASTM F1743-
08(2016)
Standard Practice for Rehabilitation of Existing
Pipelines and Conduits by Pulled-in-Place Installation
of Cured-in-Place Thermosetting Resin Pipe (CIPP)
8
129 ASTM F2135 -01(2017)
Replace: ASTM F2135-
01(2012)
Standard Specification for Molded Drain, Waste, and
Vent (DWV) Short-Pattern Plastic Fittings
6
130 ASTM D2513-16a
Replace: ASTM D2513-
14e1
Standard Specification for Polyethylene (PE) Gas
Pressure Pipe, Tubing, and Fittings
18
131 ASTM D3006 -10(2017)
Replace: ASTM D3006-
10
Standard Specification for Polyethylene Plastic
Pressure-Sensitive Electrical Insulating Tape
2
132 ASTM D2301 -10(2017)
Replace: ASTM D2301-
10
Standard Specification for Vinyl Chloride Plastic
Pressure-Sensitive Electrical Insulating Tape
2
133 ASTM D4570-02(2017)
Replace: ASTM D4570-
02(2012)
Standard Test Method for Rubber Chemicals-
Determination of Particle Size of Sulfur by Sieving
(Dry)
2
134 ASTM D4315-94(2017)
Replace: ASTM D4315-
94(2012)
Standard Test Methods for Rubber Compounding
Material; Zinc Oxide
3
135 ISO/TR 21275:2017 Rubber -- Comprehensive review of the composition
and nature of process fumes in the rubber industry
52
Phụ kiện đường ống cấp nước – thoát nước Trở về đầu trang
136 BS EN ISO 15876-1:2017
Replace: BS EN ISO
15876-1:2003
Plastics piping systems for hot and cold water
installations. Polybutene (PB). General
20
137 BS EN ISO 15876-3:2017
Replace: BS EN ISO
15876-3:2003
Plastics piping systems for hot and cold water
installations. Polybutene (PB). Fittings
26
138 JIS K 6777:2016 Chlorinated poly(vinyl chloride) (PVC-C) pipe fittings
for hot and cold water supply
34
139 JIS K 6776:2016 Chlorinated poly(vinyl chloride) (PVC-C) pipes for
hot and cold water supply
19
140 JIS K 6739:2016 Unplasticized poly(vinyl chloride) (PVC-U) pipe 23
12
fittings for drain
141 JIS K 6743:2016 Unplasticized poly(vinyl chloride) (PVC-U) pipe
fittings for water supply
55
142 JIS K 6741:2016 Unplasticized poly(vinyl chloride) (PVC-U) pipes 33
143 JIS K 6742:2016 Unplasticized poly(vinyl chloride) (PVC-U) pipes for
water supply
24
Hóa chất Trở về đầu trang
144 ASTM D5234-92(2017)
Replace: ASTM D5234-
92(2012)
Standard Guide for Analysis of Ethylene Product 3
145 ASTM D6353-
06(2017)e1 Replace:
ASTM D6353-06(2011)
Standard Guide for Sampling Plan and Core Sampling
for Prebaked Anodes Used in Aluminum Production
4
146 ASTM D2180-17
Replace: ASTM D2180-
89(2008)
Standard Test Method for Active Oxygen in Bleaching
Compounds
2
147 ASTM C732-17 Replace:
ASTM C732-06(2012)
Standard Test Method for Aging Effects of Artificial
Weathering on Latex Sealants
3
148 ASTM D5757 -11(2017)
Replace: ASTM D5757-
11
Standard Test Method for Determination of Attrition
of FCC Catalysts by Air Jets
3
149 ASTM D4780 -
12(2017)e1 Replace:
ASTM D4780-12
Standard Test Method for Determination of Low
Surface Area of Catalysts and Catalyst Carriers by
Multipoint Krypton Adsorption
5
150 ASTM D6744-
06(2017)e1 Replace:
ASTM D6744-
06(2011)e1
Standard Test Method for Determination of the
Thermal Conductivity of Anode Carbons by the
Guarded Heat Flow Meter Technique
6
151 ASTM D1857/D1857M-
17 Replace: ASTM
D1857/D1857M-16
Standard Test Method for Fusibility of Coal and Coke
Ash
4
152 ASTM D3173/D3173M-
17 Replace: ASTM
D3173-11
Standard Test Method for Moisture in the Analysis
Sample of Coal and Coke
5
153 ASTM D4513 -11(2017)
Replace: ASTM D4513-
11
Standard Test Method for Particle Size Distribution of
Catalytic Materials by Sieving
3
154 ASTM D2961/D2961M -
17 Replace: ASTM
D2961-11
Standard Test Method for Single-Stage Total Moisture
Less than 15 % in Coal Reduced to 2.36-mm (No. 8
Sieve) Topsize
3
155 ASTM E1450 -16
Replace: ASTM E1450-
09
Standard Test Method for Tension Testing of
Structural Alloys in Liquid Helium
9
13
156 ASTM D3302/D3302M-
17 Replace: ASTM
D3302/D3302M-15
Standard Test Method for Total Moisture in Coal 10
Hạt nhân Trở về đầu trang
157 IEC 61504:2017 Replace:
IEC 61504:2000
Nuclear facilities - Instrumentation and control
systems important to safety - Centralized systems for
continuous monitoring of radiation and/or levels of
radioactivity
60
Dầu mỏ Trở về đầu trang
158 ASTM D4175 -17
Replace: ASTM D4175-
16c
Standard Terminology Relating to Petroleum Products,
Liquid Fuels, and Lubricants
67
159 ASTM D6791 -
11(2017)e1 Replace:
ASTM D6791-11
Standard Test Method for Determination of Grain
Stability of Calcined Petroleum Coke
5
160 ASTM D6376 -
10(2017)e1 Replace:
ASTM D6376-10
Standard Test Method for Determination of Trace
Metals in Petroleum Coke by Wavelength Dispersive
X-ray Fluorescence Spectroscopy
5
161 ASTM D5706 -16
Replace: ASTM D5706-
05(2011)e1
Standard Test Method for Determining Extreme
Pressure Properties of Lubricating Greases Using a
High-Frequency, Linear-Oscillation (SRV) Test
Machine
9
162 ASTM D7421-16
Replace: ASTM D7421-
11
Standard Test Method for Determining Extreme
Pressure Properties of Lubricating Oils Using High-
Frequency, Linear-Oscillation (SRV) Test Machine
7
163 ASTM D4529-17
Replace: ASTM D4529-
01(2011)
Standard Test Method for Estimation of Net Heat of
Combustion of Aviation Fuels
4
164 ASTM D6278 -17
Replace: ASTM D6278-
12e1
Standard Test Method for Shear Stability of Polymer
Containing Fluids Using a European Diesel Injector
Apparatus
9
165 BS EN 13807:2017
Replace; BS EN
13807:2003
Transportable gas cylinders. Battery vehicles and
multiple-element gas containers (MEGCs). Design,
manufacture, identification and testing
28
166 ISO 20421-2:2017
Replace: ISO 20421-
2:2005
Cryogenic vessels -- Large transportable vacuum-
insulated vessels -- Part 2: Operational requirements
14
Nhiên liệu sinh học rắn Trở về đầu trang
167 BS EN ISO 18134-2:2017
Replace: BS EN ISO
18134-2:2015
Solid biofuels. Determination of moisture content.
Oven dry method. Total moisture. Simplified method
14
Sơn và vecni Trở về đầu trang
14
168 BS EN ISO 20567-1:2017
Replace: BS EN ISO
20567-1:2006
Paints and varnishes. Determination of stone-chip
resistance of coatings. Multi-impact testing
24
Da – May mặc Trở về đầu trang
169 ISO 17075-1:2017
(IULTCS/IUC 18-1)
Replace: ISO 17075:2007
(IULTCS/IUC 18)
Leather -- Chemical determination of chromium(VI)
content in leather -- Part 1: Colorimetric method
11
170 ISO 17075-2:2017
(IULTCS/IUC 18-2)
Replace: ISO 17075:2007
(IULTCS/IUC 18)
Leather -- Chemical determination of chromium(VI)
content in leather -- Part 2: Chromatographic method
16
171 ISO 23910:2017
(IULTCS/IUP 44)
Replace: ISO 23910:2007
(IULTCS/IUP 44)
Leather -- Physical and mechanical tests --
Measurement of stitch tear resistance
4
172 ISO 5402-1:2017
(IULTCS/IUP 20)
Replace: ISO 5402-
1:2011 (IULTCS/IUP 20-
1)
Leather -- Determination of flex resistance -- Part 1:
Flexometer method
7
173 BS EN ISO 14362-3:2017
Replace: BS EN 14362-
3:2012
Textiles. Methods for determination of certain
aromatic amines derived from azo colorants. Detection
of the use of certain azo colorants, which may release
4-aminoazobenzene
26
Gốm sứ Trở về đầu trang
174 ASTM C1360-17
Replace: ASTM C1360-
10(2015)
Standard Practice for Constant-Amplitude, Axial,
Tension-Tension Cyclic Fatigue of Continuous Fiber-
Reinforced Advanced Ceramics at Ambient
Temperatures
9
175 ASTM C1337 -17
Replace: ASTM C1337-
10(2015)
Standard Test Method for Creep and Creep Rupture of
Continuous Fiber-Reinforced Advanced Ceramics
Under Tensile Loading at Elevated Temperatures
11
176 ASTM C1368 -10(2017)
Replace: ASTM C1368-
10
Standard Test Method for Determination of Slow
Crack Growth Parameters of Advanced Ceramics by
Constant Stress-Rate Strength Testing at Ambient
Temperature
11
177 ASTM C1576-05(2017)
Replace: ASTM C1576-
05(2010)
Standard Test Method for Determination of Slow
Crack Growth Parameters of Advanced Ceramics by
Constant Stress Flexural Testing (Stress Rupture) at
Ambient Temperature
13
178 ASTM C1773-17
Replace: ASTM C1773-
13
Standard Test Method for Monotonic Axial Tensile
Behavior of Continuous Fiber-Reinforced Advanced
Ceramic Tubular Test Specimens at Ambient
27
15
Temperature
179 ISO 19618:2017 Fine ceramics (advanced ceramics, advanced technical
ceramics) -- Measurement method for normal spectral
emissivity using blackbody reference with an FTIR
spectrometer
13
Dầu và mỡ động vật và thực vật Trở về đầu trang
180 BS EN ISO 8534:2017
Replace: BS EN ISO
8534:2008
BS EN ISO 8534 Animal and vegetable fats and oils -
Determination of water content - Karl Fischer method
(pyridine free)
22
181 ISO 15774:2017 Replace:
ISO 15774:2000
Animal and vegetable fats and oils -- Determination of
cadmium content by direct graphite furnace atomic
absorption spectrometry
6
182 ISO 6883:2017 Replace:
ISO 6883:2007
Animal and vegetable fats and oils -- Determination of
conventional mass per volume (litre weight in air)
11
183 ISO 663:2017 Replace:
ISO 663:2007
Animal and vegetable fats and oils -- Determination of
insoluble impurities content
6
184 ISO 3960:2017 Replace:
ISO 3960:2007
Animal and vegetable fats and oils -- Determination of
peroxide value -- Iodometric (visual) endpoint
determination
10
185 ISO 8534:2017 Replace:
ISO 8534:2008
Animal and vegetable fats and oils -- Determination of
water content -- Karl Fischer method (pyridine free)
10
Gia vị Trở về đầu trang
186 ASTM E1083-00(2017)
Replace: E1083-00(2011)
Standard Test Method for Sensory Evaluation of Red
Pepper Heat
4
187 ASTM E1395-90(2017)
Replace: ASTM E1395-
90(2011)
Standard Test Method for Sensory Evaluation of Low
Heat Chilies
4
188 ASTM E1396-90(2017)
Replace: ASTM E1396-
90(2011)
Standard Test Method for Sensory Evaluation of
Oleoresin Capsicum
4
Bao bì Y tế - Bao bì thực phẩm Trở về đầu trang
189 BS EN 868-2:2017 Packaging for terminally sterilized medical devices.
Sterilization wrap. Requirements and test methods
28
190 BS EN 868-7:2017
Replace: BS EN 868-
7:2009
Packaging for terminally sterilized medical devices.
Adhesive coated paper for low temperature
sterilization processes. Requirements and test methods
30
191 JIS Z 1571:2016 Specifications for hermetically sealed metal cans for
food and drink
16
Tinh dầu Trở về đầu trang
192 BS ISO 3054:2017 Essential oil of lavandin Abrial (Lavandula
angustifolia Mill. x Lavandula latifolia Medik.),
18
16
French type
193 ISO 3054:2017 Replace:
ISO 3054:2001
Essential oil of lavandin Abrial (Lavandula
angustifolia Mill. × Lavandula latifolia Medik.),
French type
8
194 ISO 4730:2017 Replace:
ISO 4730:2004
Essential oil of Melaleuca, terpinen-4-ol type (Tea
Tree oil)
10
Thiết bị y tế - Chăm sóc sức khỏe Trở về đầu trang
195 ISO 21298:2017 Replace:
ISO/TS 21298:2008
Health informatics -- Functional and structural roles 33
196 ASTM E1939-17 Standard Practice for Blood Irradiation Dosimetry 13
197 JIS T 9205:2016 Hospital beds 24
198 PD IEC/TR 80001-2-
9:2017
Application of risk management for it-networks
incorporating medical devices. Application guidance.
Guidance for use of security assurance cases to
demonstrate confidence in IEC TR 80001-2-2 security
capabilities
40
199 PD IEC/PAS 63083:2017 Specific absorption rate (SAR) measurement
procedure for long term evolution (LTE) devices
32
200 BS EN 12574-3:2017
Replace: BS EN 12574-
3:2006
Stationary waste containers. Safety and health
requirements
12
201 IEC 60601-2-28:2017
Replace: IEC 60601-2-
28:2010
Medical electrical equipment - Part 2-28: Particular
requirements for the basic safety and essential
performance of X-ray tube assemblies for medical
diagnosis
26
Chất lượng đất – Trầm tích Trở về đầu trang
202 ASTM D8107-17 Standard Practice for Determining Sediment Pond
Skimmer Flow Rate
3
203 ISO 14869-3:2017 Soil quality -- Dissolution for the determination of
total element content -- Part 3: Dissolution with
hydrofluoric, hydrochloric and nitric acids using
pressurised microwave technique
9
Tài liệu hướng dẫn trong sản xuất, kinh doanh Trở về đầu trang
204 ISO 16355-2:2017 Applications of statistical and related methods to new
technology and product development process -- Part 2:
Non-quantitative approaches for the acquisition of
voice of customer and voice of stakeholder
41
205 ISO 16355-4:2017 Applications of statistical and related methods to new
technology and product development process -- Part 4:
Analysis of non-quantitative and quantitative Voice of
Customer and Voice of Stakeholder
25
206 ISO 16355-5:2017 Applications of statistical and related methods to new
technology and product development process -- Part 5:
126
17
Solution strategy
207 ISO/TR 16355-8:2017 Applications of statistical and related methods to new
technology and product development process -- Part 8:
Guidelines for commercialization and life cycle
51
208 ISO/IEC Guide 46:2017
Replace: ISO/IEC Guide
46:1985
Comparative testing of consumer products and related
services -- General principles
5
209 ISO 22514-2:2017
Replace: ISO 22514-
2:2013
Statistical methods in process management --
Capability and performance -- Part 2: Process
capability and performance of time-dependent process
models
21
Thử nghiệm – Phân tích Trở về đầu trang
210 ASTM E1316-17
Replace: ASTM E1316-
15a
Standard Terminology for Nondestructive
Examinations
38
211 BS ISO 15708-4:2017 BS ISO 15708-4 Non-destructive testing — Radiation
methods for computed tomography. Part 4:
Qualification
20
212 BS EN ISO 5577:2017
Replace: BS EN 1330-
4:2010
Non-destructive testing. Ultrasonic testing.
Vocabulary
48
213 BS ISO 22412:2017
Replace: BS 3406-8:1997,
ISO 13321:1996, BS ISO
22412:2008
Particle size analysis. Dynamic light scattering (DLS) 46
214 ISO 22412:2017 Replace:
ISO 13321:1996; ISO
22412:2008
Particle size analysis -- Dynamic light scattering
(DLS)
34
215 JIS Z 2355-1:2016 Non-destructive testing -- Ultrasonic thickness
measurement -- Part 1: Measurement method
55
216 JIS Z 2355-2:2016 Non-destructive testing -- Ultrasonic thickness
measurement -- Part 2: Method for evaluating
performance characteristics of ultrasonic thickness
measuring equipment
30
Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa
học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong
trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông
tin, xin vui lòng liên hệ:
1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện
sau:
+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";
+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;
18
+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:
2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM
Địa chỉ: 79 Trương Định - Q1 - TP.HCM
ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957
Website: www.cesti.gov.vn Email: [email protected]
Lưu ý
1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.
2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)
Thư viện Trường Đại học Công nghiệp Thành phố H Chí Minh.