tiÊu chuẨn mỚi sỐ 01&02/2018 -...
TRANSCRIPT
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 1/25
TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH
TRUNG TÂM THÔNG TIN – THƯ VIỆN
TIÊU CHUẨN MỚI SỐ 01&02/2018
TIÊU CHUẨN – QUY CHUẨN – VĂN BẢN KỸ THUẬT ĐO LƯỜNG VIỆT NAM ................................. 2
Tổ chức, quản lý và chất lượng công ty ............................................................................................................... 2
An toàn trong gia đình .......................................................................................................................................... 2
Hệ thống và kết cấu cơ khí ................................................................................................................................... 2
Kỹ thuật điện (máy biến áp) ................................................................................................................................. 3
Thiết bị xếp dỡ vật liệu (thiết bị nâng) ................................................................................................................ 3
Công nghệ hóa chất .............................................................................................................................................. 3
Luyện kim ............................................................................................................................................................. 4
TIÊU CHUẨN NƯỚC NGOÀI ............................................................................................................................. 4
Vấn đề chung. Thuật ngữ. Tiêu chuẩn hóa. Tư liệu (khoa học thông tin, đại lượng và đơn vị, từ vựng, sản
phẩm kỹ thuật) ........................................................................................................................................................... 4
Vận tải ................................................................................................................................................................... 4
Dịch vụ. Tổ chức, quản lý và chất lượng công ty ............................................................................................... 5
Công nghệ sinh học .............................................................................................................................................. 5
Công nghệ chăm sóc sức khỏe ............................................................................................................................. 5
Môi trường. Bảo vệ sức khỏe. An toàn ................................................................................................................ 6
Đo lường và phép đo ............................................................................................................................................ 9
Thử nghiệm ......................................................................................................................................................... 10
Hệ thống và kết cấu cơ khí ................................................................................................................................. 10
Hệ thống và kết cấu chất lỏng ............................................................................................................................ 11
Chế tạo ................................................................................................................................................................ 11
Năng lượng và truyền nhiệt ................................................................................................................................ 11
Kỹ thuật điện ...................................................................................................................................................... 11
Điện tử ................................................................................................................................................................ 11
Viễn thông .......................................................................................................................................................... 13
Công nghệ thông tin ........................................................................................................................................... 13
Công nghệ ảnh .................................................................................................................................................... 14
Phương tiện giao thông đường bộ ...................................................................................................................... 14
Đường sắt ............................................................................................................................................................ 14
Đóng tàu và kết cấu tàu thủy .............................................................................................................................. 14
Kỹ thuật máy bay và tàu vũ trụ .......................................................................................................................... 15
Thiết bị xếp dỡ vật liệu ....................................................................................................................................... 18
Nông nghiệp ....................................................................................................................................................... 18
Công nghệ thực phẩm ........................................................................................................................................ 18
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 2/25
Công nghệ hóa chất ............................................................................................................................................ 19
Khai thác mỏ và khoáng sản .............................................................................................................................. 19
Dầu mỏ ................................................................................................................................................................ 19
Luyện kim ........................................................................................................................................................... 20
Công nghệ chế biến gỗ ....................................................................................................................................... 20
Thủy tinh và gốm ............................................................................................................................................... 21
Cao su và chất dẻo .............................................................................................................................................. 21
Giấy ..................................................................................................................................................................... 21
Sơn và chất màu ................................................................................................................................................. 21
Vật liệu xây dựng ............................................................................................................................................... 22
Xây dựng dân dụng ............................................................................................................................................ 24
Thiết bị gia dụng và thương mại giải trí. Thể thao ............................................................................................ 25
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Tiêu chuẩn – Quy chuẩn – Văn bản kỹ thuật đo lường Việt Nam
Tổ chức, quản lý và chất lượng công ty Trở về đầu trang
1 TCVN 11863:2017
Phương pháp thống kê đánh giá độ không đảm bảo –
Hướng dẫn đánh giá độ không đảm bảo sử dụng thiết
kế chéo hai yếu tố
28
2 TCVN 11864:2017
Phương pháp định lượng trong cải tiến quá trình –
Six sigma – Năng lực của nhân sự chủ chốt và tổ
chức khi triển khai six sigma và lean
61
3 TCVN 11865-1:2017 Khía cạnh thống kê của lấy mẫu vật liệu dạng đống –
Phần 1: Nguyên tắc chung 103
4 TCVN 11865-2:2017 Khía cạnh thống kê của lấy mẫu vật liệu dạng đống –
Phần 2: Lấy mẫu vật liệu dạng hạt 120
An toàn trong gia đình (thiết bị điện) Trở về đầu trang
5 TCVN 5699-2-6:2017 Thay
thế TCVN 5699-2-6:2010
Thiết bị điện gia dụng và thiết bị điện tương tự - An
toàn – Phần 2-6: Yêu cầu cụ thể đối với lò liền bếp,
bếp, lò và các thiết bị tương tự đặt tĩnh tạị
54
6 TCVN 5699-2-9:2017 Thay
thế TCVN 5699-2-9:2010
Thiết bị điện gia dụng và thiết bị điện tương tự - An
toàn – Phần 2-9: Yêu cầu cụ thể đối với vỉ nướng,
máy nướng bánh mỳ và các thiết bị nấu di động
tương tự
49
7 TCVN 5699-2-40:2017 Thay
thế TCVN 5699-2-40:2007
Thiết bị điện gia dụng và thiết bị điện tương tự - An
toàn – Phần 2-40: Yêu cầu cụ thể đối với bơm nhiệt,
máy điều hòa không khí và máy hút ẩm
83
Hệ thống và kết cấu cơ khí Trở về đầu trang
8 TCVN 7578-1:2017
Tính toán khả năng tải của bánh răng thẳng và bánh
răng nghiêng – Phần 1: Nguyên lý cơ bản, giới thiệu
và các hệ số ảnh hưởng chung
128
9 TCVN 7578-5:2017 Tính toán khả năng tải của bánh răng thẳng và bánh
răng nghiêng – Phần 5: Độ bền và chất lượng của vật 53
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 3/25
liệu
10 TCVN 12131:2017
Tính toán khả năng tải của bánh răng thẳng và bánh
răng nghiêng – Ứng dụng cho các bánh răng dùng
trong hàng hải
68
11 TCVN 12132:2017
Tính toán khả năng tải của bánh răng thẳng và bánh
răng nghiêng – Ứng dụng cho các bánh răng dùng
trong công nghiệp
69
12 TCVN 12133:2017 Bánh răng côn – Hệ thống độ chính xác theo ISO
17485:2006 39
Kỹ thuật điện (máy biến áp) Trở về đầu trang
13 TCVN 6306-13:2017 Máy biến áp điện lực – Phần 13: Máy biến áp chứa
chất lỏng loại tự bảo vệ 20
14 TCVN 8096-202:2017 Cụm đóng cắt và điều khiển cao áp- Phần 202: Trạm
biến áp lắp sẵn cao áp/hạ áp 100
Thiết bị xếp dỡ vật liệu (thiết bị nâng) Trở về đầu trang
15 TCVN 5205-2:2017 Thay thế
TCVN 5205-2:2008
Cần trục – Cabin và trạm điều khiển – Phần 2: Cần
trục tự hành 10
16 TCVN 7761-2:2017 Thay thế
TCVN 7761-2:2007
Cần trục – Thiết bị giới hạn và thiết bị chỉ báo – Phần
2: Cần trục tự hành 16
17 TCVN 8854-2:2017 Thay thế:
TCVN 8854-2:2011
Cần trục – Sơ đồ và đặc tính điều khiển – Phần 2:
Cần trục tự hành 14
18 TCVN 12156:2017 Cần trục – Quy trình thử và quy trình kiểm tra 15
19 TCVN 12157:2017 Cần trục – Yêu cầu đối với tải trọng thử 9
20 TCVN 12158:2017 Cần trục – An toàn – Thiết bị mang tải chuyên dùng 56
21 TCVN 12159:2017 Cần trục – Thiết kế chung – Trạng thái giới hạn và
kiểm nghiệm khả năng chịu tải của móc thép rèn 88
22 TCVN 12160:2017 Cần trục – Kiểm nghiệm khả năng chịu tải của kết
cấu thép 102
23 TCVN 12161:2017 Cần trục – Đo độ lệch của bánh xe 15
24 TCVN 12162-2:2017
Cần trục –Xác định thực nghiệm khả năng làm việc
của cần trục tự hành – Phần 2: Khả năng làm việc của
kết cấu khi chịu tải trọng tĩnh
50
Công nghệ hóa chất Trở về đầu trang
25 TCVN 7962:2017 Thay thế
TCVN 7962:2008
Mẫu chuẩn – Nội dung của giấy chứng nhận, nhãn và
tài liệu kèm theo 17
26 TCVN 8890:2017 Thay thế
TCVN 8890:2011 Mẫu chuẩn – Thuật ngữ và định nghĩa 16
27
TCVN 8891:2017 Thay thế
TCVN 8891:2011 và TCVN
8056:2008
Mẫu chuẩn – Thực hành tốt trong sử dụng mẫu chuẩn 41
28 TCVN 11862:2017
Mẫu chuẩn – Thiết lập và thể hiện liên kết chuẩn đo
lường của các giá trị đại lượng được ấn định cho mẫu
chuẩn
36
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 4/25
Luyện kim Trở về đầu trang
29 TCVN 12143:2017
Anốt hóa nhôm và hợp kim nhôm – Kiểm tra tính
liên tục của lớp phủ anốt hóa mỏng – Thử bẳng
sunfat đồng
6
30 TCVN 12144:2017
Anốt hóa nhôm và hợp kim nhôm – Xác định khối
lượng trên một đơn vị diện tích ( mật độ bề mặt) của
lớp phủ anốt hóa – Phương pháp trọng lực
10
31 TCVN 12145:2017
Anốt hóa nhôm và hợp kim nhôm – Thử nhanh độ
bền chịu sáng của lớp phủ anốt hóa có màu sử dụng
ánh sáng nhân tạo
11
32 TCVN 12146:2017
Anốt hóa nhôm và hợp kim nhôm – Đánh giá sự mất
khả năng hấp thụ của lớp phủ anốt hóa sau bịt kín –
Thử vết đốm màu bằng xử lý axit sơ bộ
10
33 TCVN 12147:2017 Anốt hóa nhôm và hợp kim nhôm – Xác định điện áp
đánh thủng 8
34 TCVN 12148:2017
Anốt hóa nhôm và hợp kim nhôm – Đánh giá chất
lượng của lớp phủ anốt hóa đã bịt kín bằng phép đo
độ dẫn nạp
10
35 TCVN 12149:2017
Anốt hóa nhôm và hợp kim nhôm –– Đánh giá chất
lượng của lớp phủ anốt hóa đã bịt kín bằng phép đo
tổn thất khối lượng sau khi nhúng chìm trong dung
dịch axit
12
36 TCVN 12150:2017
Anốt hóa nhôm và hợp kim nhôm – Đánh giá độ bền
chống tạo thành vết nứt do biến dạng của lớp phủ
anốt hóa
9
37 TCVN 12151:2017
Anốt hóa nhôm và hợp kim nhôm – Xác định độ bền
so sánh chịu ánh sáng cực tím và nhiệt độ của lớp
phủ anốt hóa có màu
8
38 TCVN 12152:2017 Anốt hóa nhôm và hợp kim nhôm – Thuật ngữ và
định nghĩa 21
Tiêu chuẩn nước ngoài
Vấn đề chung. Thuật ngữ. Tiêu chuẩn hóa. Tư liệu (khoa học thông
tin, đại lượng và đơn vị, từ vựng, sản phẩm kỹ thuật) Trở về đầu trang
39 ISO 20247:2018 Information and documentation — International
library item identifier(ILII) 4
40 ISO 18794:2018 Coffee — Sensory analysis — Vocabulary 12
41 ASTM E1655-17 Replaces:
ASTM E1655-05
Standard Practices for Infrared Multivariate
Quantitative Analysis 30
42 DIN 1301-3 Units - Part 3: Conversion of non-SI units 37
43 DIN 6779-13
Structuring principles for technical products and
technical product documentation - Part 13: Chemical
plants
35
Vận tải Trở về đầu trang
44 ISO/TR 16401-1:2018
Replaces: ISO/TR 16401-
Electronic fee collection — Evaluation of equipment
for conformity to ISO/TS 17575-2 — Part 1: Test 152
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 5/25
1:2012 suite structure and test purposes
45
ISO/TR 16401-2:2018
Replaces: ISO/TS 16401-
2:2012
Electronic fee collection — Evaluation of equipment
for conformity to ISO 17575-2 — Part 2: Abstract
test suite
10
46
BS EN ISO 16410-1:2017
Replaces: DD CEN ISO/TS
16410-1:2011
Electronic fee collection. Evaluation of equipment
for conformity to ISO 17575-3. Test suite structure
and test purposes
172
47
BS EN ISO 16407-1:2017
Replaces: DD CEN ISO/TS
16407-1:2011
Electronic fee collection. Evaluation of equipment
for conformity to ISO 17575-1. Test suite structure
and test purposes
116
Dịch vụ. Tổ chức, quản lý và chất lượng công ty Trở về đầu trang
48
BS EN ISO/IEC 17011:2017
Replaces: BS EN ISO/IEC
17011:2004
Conformity assessment. Requirements for
accreditation bodies accrediting conformity
assessment bodies
36
49 ISO 18841:2018 Interpreting services — General requirements and
recommendations 16
50 IEC 60335-2-71:2018 (Điện)
Household and similar electrical appliances - Safety -
Part 2-71: Particular requirements for electrical
heating appliances for breeding and rearing animals
37
51 IEC 60335-2-71:2018
Household and similar electrical appliances - Safety -
Part 2-71: Particular requirements for electrical
heating appliances for breeding and rearing animals
37
52 ASTM F2275-17 Replaces:
ASTM F2275-10
Standard Practice for Treestand Manufacturer
Quality Assurance Program 2
Công nghệ sinh học Trở về đầu trang
53 ISO 20391-1:2018 Biotechnology — Cell counting — Part 1: General
guidance on cell counting methods 16
Công nghệ chăm sóc sức khỏe Trở về đầu trang
54 ISO 13408-2:2018 Replaces:
ISO 13408-2:2003
Aseptic processing of health care products — Part 2:
Sterilizing filtration 34
55 ISO 11737-1:2018 Replaces:
ISO 11737-1:2006
Sterilization of health care products —
Microbiological methods — Part 1: Determination of
a population of microorganisms on products
48
56 ISO 19090:2018
Tissue-engineered medical products — Bioactive
ceramics — Method to measure cell migration in
porous materials
33
57
ISO 21533:2018 Replaces;
ISO 21533:2003; ISO
21533:2003/Cor 1:2009
Dentistry — Reprocessable cartridge syringes for
intraligamentary injections 8
58 ISO 15002:2008/Amd.1:2018
Flow-metering devices for connection to terminal
units of medical gas pipeline systems
AMENDMENT 1
1
59 ISO/TR 14283:2018
Replaces; ISO/TR 14283:2004
Implants for surgery — Essential principles of safety
and performance 20
60 IEC 60601-2-76:2018 PRV Medical Electrical Equipment - Part 2-76: Particular 53
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 6/25
requirements for the basic safety and essential
performance of low energy ionized gas haemostasis
equipment
61 IEC TR 61948-3:2018 Nuclear medicine instrumentation - Routine tests -
Part 3: Positron emission tomographs 11
62 ASTM F2129-17b Replaces:
ASTM F2129-17
Standard Test Method for Conducting Cyclic
Potentiodynamic Polarization Measurements to
Determine the Corrosion Susceptibility of Small
Implant Devices
9
63 ASTM F3141-17a Replaces:
ASTM F3141-17
Standard Guide for Total Knee Replacement Loading
Profiles 33
64 DIN 13111 Medical instruments - Bandage scissors 5
65 DIN 19410 Dentistry - Intraoral camera 21
66 DIN 58951-2
Sterilization - Steam sterilizers for laboratory use -
Part 2: Apparatus requirements, requirements on
services and installation
31
67 DIN EN 12791
Chemical disinfectants and antiseptics - Surgical
hand disinfection - Test method and requirements
(phase 2, step 2); German version EN
12791:2016+A1:2017
36
68
BS EN ISO 11616:2017
Replaces: BS EN ISO
11616:2012
Health informatics. Identification of medicinal
products. Data elements and structures for unique
identification and exchange of regulated
pharmaceutical product information
42
Môi trường. Bảo vệ sức khỏe. An toàn Trở về đầu trang
69 ISO 18639-3:2018 PPE ensembles for firefighters undertaking specific
rescue activities — Part 3: Clothing 15
70 ISO/TS 19620:2018
Water quality — Determination of arsenic(III) and
arsenic(V) species — Method using high
performance liquid chromatography (HPLC) with
detection by inductively coupled plasma mass
spectrometry (ICP-MS) or hydride generation atomic
fluorescence spectrometry (HG-AFS)
41
71 ISO/IEC 20243-2:2018
Information technology — Open Trusted Technology
ProviderTM Standard (O-TTPS) — Mitigating
maliciously tainted and counterfeit products —
Part 2: Assessment procedures for the O-TTPS and
ISO/IEC 20243-1:2018
33
72 ISO 18639-6:2018 PPE ensembles for firefighters undertaking specific
rescue activities — Part 6: Footwear 18
73 ISO 18639-1:2018 PPE ensembles for firefighters undertaking specific
rescue activities — Part 1: General 17
74 ISO 20595:2018
Water quality. Determination of selected highly
volatile organic compounds in water. Method using
gas chromatography and mass spectrometry by static
headspace technique (HS-GC-MS)
24
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 7/25
75 IEC TR 61511-0:2018
Functional safety - Safety instrumented systems for
the process industry sector - Part 0: Functional safety
for the process industry and IEC 61511
8
76 IEC 61511:2018 SER Functional safety - Safety instrumented systems for
the process industry sector - ALL PARTS 1185
77 IEC 60825:2018 SER Safety of laser products - ALL PARTS 836
78 IEC 61482-2:2018 PRV
Live working - Protective clothing against the
thermal hazards of an electric arc - Part 2:
Requirements
56
79 IEC 61511:2018 SER Functional safety - Safety instrumented systems for
the process industry sector - ALL PARTS 1185
80 IEC TR 61511-0:2018
Functional safety - Safety instrumented systems for
the process industry sector - Part 0: Functional safety
for the process industry and IEC 61511
8
81 IEC 62046:2018 PRV Safety of machinery - Application of protective
equipment to detect the presence of persons 92
82 ISO/IEC 20243-2:2018
Information technology - Open Trusted Technology
ProviderTM Standard (O-TTPS) - Mitigating
maliciously tainted and counterfeit products - Part 2:
Assessment procedures for the O-TTPS and ISO/IEC
20243-1:2018
33
83 ASTM F479-06(2017)
Replaces: ASTM F479-06
Standard Specification for In-Service Care of
Insulating Blankets 5
84 ASTM F1516-13(2018)
Replaces: ASTM F1516-08
Standard Practice for Sealing Seams of Resilient
Flooring Products by the Heat Weld Method (when
Recommended)
2
85 ASTM F2547-18 Replaces:
ASTM F2547-06(2013)
Standard Test Method for Determining the
Attenuation Properties in a Primary X-ray Beam of
Materials Used to Protect Against Radiation
Generated During the Use of X-ray Equipment
4
86 ASTM F2890-17 Replaces:
ASTM F2890-12
Standard Guide for Hazard Awareness for Search and
Rescue Personnel 3
87 BS EN ISO 19238:2017
Replaces: BS ISO 19238:2004
Radiological protection. Performance criteria for
service laboratories performing biological dosimetry
by cytogenetics
38
88
BS EN 15004-10:2017
Replaces: BS EN 15004-
10:2008
Fixed firefighting systems. Gas extinguishing
systems. Physical properties and system design of gas
extinguishing systems for IG-541
14
89
BS EN 15004-9:2017
Replaces: BS EN 15004-
9:2008
Fixed firefighting system. Gas extinguishing systems.
Physical properties and system design of gas
extinguishing systems for IG-55 extinguishant
14
90 BS EN ISO 19085-3:2017
Woodworking machines. Safety requirements.
Numerically controlled (NC) boring and routing
machines
76
91 BS EN 50131-2-2:2017
Replaces: BS EN 50131-2-
Alarm systems. Intrusion and hold-up systems.
Intrusion detectors. Passive infrared detectors 48
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 8/25
2:2008
92 BS EN ISO 19340:2017 Water quality. Determination of dissolved
perchlorate. Method using ion chromatography (IC) 32
93 DIN 1239
Coverings for wells, spring water chambers and other
water supply construction - Principles for
construction
20
94 DIN 2001-2
Drinking water supply from small units and non
stationary plants - Part 2: Non stationary units -
Guidelines for drinking water, planning, construction,
operation and maintenance of units
40
95 DIN 3553
Fittings for drinking water systems in buildings -
Leakage protection systems with sensors and
automated shut-off devices - Detectors for
installation in drinking water installations -
Requirements and tests
12
96 DIN 14011 Firefighting and fire protection - Terms and
definitions 61
97 DIN 14701-1
High rise aerial appliance for fire fighting and rescue
services - Part 1: Hydraulic platforms (HPs) in
accordance to DIN EN 1777 - Tactical classification
and terms and performance requirements of
telescopic articulated platforms (TGM)
18
98 DIN 19279
Photocatalytic activity of surfaces - Determination of
the photocatalytic deposition velocity of nitrogen
monoxide at photocatalytically active surfaces
18
99 DIN 19627 Ozone generation plants for water treatment 19
100 DIN 54113-1
Non-destructive testing - Radiation protection rules
for the technical application of X-ray equipment up
to 1MV - Part 1: Technical safety requirements and
testing for the manufacture, installation and operation
24
101 DIN EN 342
Protective clothing - Ensembles and garments for
protection against cold; German version EN
342:2017
28
102 DIN EN 388/A1 Protective gloves against mechanical risks; German
and English version EN 388:2016/prA1:2017 14
103 DIN EN 1147 Beiblatt 1
Portable ladders for fire brigade in accordance to
DIN EN 1147 - Supplement 1: Stick ladder, hook
ladder, extending ladder, sectional ladder, socket
part, connector for sectional ladder, multifunction
ladder
33
104 DIN EN 1366-3
Fire resistance tests for service installations - Part 3:
Penetration seals; German and English version prEN
1366-3:2018
354
105 DIN EN 13138-2 Buoyant aids for swimming instruction - Part 2:
Safety requirements and test methods for buoyant
aids to be held; German and English version prEN
56
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 9/25
13138-2:2018
106 DIN EN 13138-3
Buoyant aids for swimming instruction - Part 3:
Safety requirements and test methods for swim seats
to be worn; German and English version prEN
13138-3:2018
113
107 DIN EN 13138-4
Buoyant aids for swimming instruction - Part 4: In
water performance, requirements and test procedures
for Class B swimming devices; German and English
version prEN 13138-4:2018
56
108 DIN EN 13277-8
Protective equipment for martial arts - Part 8:
Additional requirements and test methods for karate
face protectors; German version EN 13277-8:2017
18
109 DIN EN 13819-1
Hearing protectors - Testing - Part 1: Physical test
methods; German and English version prEN 13819-
1:2018
105
110 DIN EN 13819-2
Hearing protectors - Testing - Part 2: Acoustic test
methods; German and English version prEN 13819-
2:2018
29
111 DIN EN 1501-1
Refuse collection vehicles - General requirements
and safety requirements - Part 1: Rear loaded refuse
collection vehicles; German and English version
prEN 1501-1:2018
160
112 DIN EN 1501-2
Refuse collection vehicles - General requirements
and safety requirements - Part 2: Side loaded refuse
collection vehicles; German and English version
prEN 1501-2:2018
108
113 DIN EN 1501-3
Refuse collection vehicles and their associated lifting
devices - General requirements and safety
requirements - Part 3: Front loaded refuse collection
vehicles; German and English version prEN 1501-
3:2018
101
114 DIN EN 1501-5
Refuse collection vehicles - General requirements
and safety requirements - Part 5: Lifting devices for
refuse collection vehicles; German and English
version prEN 1501-5:2018 (Môi trường)
192
Đo lường và phép đo Trở về đầu trang
115 ISO/TR 15377:2018
Replaces: ISO/TR 15377:2007
Measurement of fluid flow by means of pressure-
differential devices — Guidelines for the
specification of orifice plates, nozzles and Venturi
tubes beyond the scope of ISO 5167
31
116
ISO 3822-3:2018 Replaces:
ISO 3822-3:1997; ISO 3822-
3:1997/Amd 1: 2009
Acoustics — Laboratory tests on noise emission from
appliances and equipment used in water supply
installations — Part 3: Mounting and operating
conditions for in-line valves and appliances
8
117 IEC 61340-4-5:2018 RLV Electrostatics - Part 4-5: Standard test methods for
specific applications - Methods for characterizing the
electrostatic protection of footwear and flooring in
55
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 10/25
combination with a person
118 IEC 62055-41:2018 PRV
Electricity metering - Payment systems - Part 41:
Standard transfer specification (STS) - Application
layer protocol for one-way token carrier systems
248
119 IEC 62631-3-11:2018
Dielectric and resistive properties of solid insulating
materials - Part 3-11: Determination of resistive
properties (DC Methods) - Volume resistance and
volume resistivity - Method for impregnation and
coating materials
248
120 IEC TS 62903:2018
Ultrasonics - Measurements of electroacoustical
parameters and acoustic output power of spherically
curved transducers using the self-reciprocity method
47
121 IEC PAS 63151:2018
Measurement procedure for the assessment of
specific absorption rate of human exposure to radio
frequency fields from hand-held and body-mounted
wireless communication devices - Vector
measurement-based systems (Frequency range of 30
MHz to 6 GHz)
127
122 ASTM F2216-17a Replaces:
ASTM F2216-12
Standard Specification for Selectorized Strength
Equipment 17
123
BS EN ISO 19017:2017
Replaces: BS ISO 14850-
1:2004
Guidance for gamma spectrometry measurement of
radioactive waste 56
124
BS EN 12697-10:2017
Replaces: BS EN 12697-
10:2001
Bituminous mixtures. Test methods. Compactability 16
125 DIN 878
Geometrical product specifications (GPS) -
Mechanical dial gauges - Limits for metrological
characteristics
6
126 DIN 2241
Geometrical product specifications (GPS) - Screw
setting gauges for measuring instruments for ISO
metric screw threads; setting plug gauges and setting
ring gauges from 1 mm to 100 mm nominal thread
diameter
12
127 DIN 5032-11 Photometry - Part 11: Near-field goniophotometers,
terms, characteristics and their classification 36
128 DIN 30734
Interchangeable single-chamber silos (free fall) for
use with lift-off and dumper vehicles - Connecting
dimensions and requirements
22
Thử nghiệm Trở về đầu trang
129 DIN EN 12679
Non destructive testing - Determination of the size of
industrial radiographic sources - Radiographic
method; German and English version prEN
12679:2017
24
Hệ thống và kết cấu cơ khí Trở về đầu trang
130 DIN 967 Cross recessed pan head screws with collar - Product 8
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 11/25
grade A
131 DIN 2191-2 Springs - Measuring- and test statistic - Part 2: Cold
formed cylindrical tension springs 21
132 DIN 3292 Fittings for domestic installation - Nonferrous metal
union nuts 9
133 DIN 3966-3
Worms and worm wheel - Part 3: Information to be
given to the manufacturer by the purchaser in order
to obtain the gear required
16
134 DIN 4000-90 Tabular layouts of properties - Part 90: Tool holders
for indexable inserts 40
Hệ thống và kết cấu chất lỏng Trở về đầu trang
135 DIN 18197 Sealing of joints in concrete with waterstops 53
136 DIN EN 593 Industrial valves - Metallic butterfly valves for
general purposes; German version EN 593:2017 38
Chế tạo Trở về đầu trang
137 DIN 4856 Carbon-based films and other hard coatings -
Rockwell penetration test to evaluate the adhesion 10
138 DIN 8471
Garden tools - Non-motorized hand-held tools for
using in soil - Performance characteristics -
Requirements and testing
18
139 DIN 53100
Metallic coatings - Electroplated coatings of nickel
plus chromium and of copper plus nickel plus
chromium on plastics materials
23
Năng lượng và truyền nhiệt Trở về đầu trang
140 DIN 19752 Hydropower plants - Planning, execution and
operation 20
141 DIN 25493
Nuclear facilities - Protection of metallic surfaces of
structural parts from damage from assembly aids,
gaskets, packings, packaging material and thermal
insulating materials
25
Kỹ thuật điện Trở về đầu trang
142 DIN 16873
Pipes and fittings of unplasticized poly(vinyl
chloride) (PVC-U) for cable ducting - Dimensions
and technical delivery conditions
24
143 DIN 16874
Pipes of high-density polyethylene (PE-HD) for
buried telecommunication - Dimensions and
technical delivery conditions
18
Điện tử Trở về đầu trang
144 IEC 60191-1:2018
Mechanical standardization of semiconductor devices
- Part 1: General rules for the preparation of outline
drawings of discrete devices
36
145 IEC 60191-1:2018
Mechanical standardization of semiconductor devices
- Part 1: General rules for the preparation of outline
drawings of discrete devices
36
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 12/25
146 IEC 60512-8-3:2018
Connectors for electrical and electronic equipment -
Tests and measurements - Part 8-3: Static load tests
(fixed connectors) - Test 8c: Robustness of actuating
lever
17
147 IEC 60512-15-2:2018
Connectors for electrical and electronic equipment -
Tests and measurements - Part 15-2: Connector tests
(mechanical) - Test 15b: Insert retention in housing
(axial)
16
148 IEC 60749-26:2018
Semiconductor devices - Mechanical and climatic
test methods - Part 26: Electrostatic discharge (ESD)
sensitivity testing - Human body model (HBM)
106
149 IEC PAS 61076-3-126:2018
Connectors for electrical and electronic equipment -
Product requirements - Part 3-126: Rectangular
connectors - Detail specification for 5 pole power
connector for industrial environments with push-pull
locking
42
150 IEC 61249-2-45:2018
Materials for printed boards and other
interconnecting structures - Part 2-45: Reinforced
base materials clad and unclad - Non-halogenated
epoxide non-woven/woven E-glass reinforced
laminate sheets of thermal conductivity 1,0 W/(m•K)
and defined flammability (vertical burning test),
copper-clad for lead-free assembly
22
151 IEC 61249-2-46:2018
Materials for printed boards and other
interconnecting structures - Part 2-46: Reinforced
base materials clad and unclad - Non-halogenated
epoxide non-woven/woven E-glass reinforced
laminate sheets of thermal conductivity 1,5 W/(m•K)
and defined flammability (vertical burning test),
copper-clad for lead-free assembly
22
152 IEC 61249-2-47:2018
Materials for printed boards and other
interconnecting structures - Part 2-47: Reinforced
base materials clad and unclad - Non-halogenated
epoxide non-woven/woven E-glass reinforced
laminate sheets of thermal conductivity 2,0 W/(m•K)
and defined flammability (vertical burning test),
copper-clad for lead-free assembly
22
153 IEC 62228-1:2018 Integrated circuits - EMC evaluation of transceivers -
Part 1: General conditions and definitions 8
154 IEC 62610-2:2018 PRV
Mechanical structures for electrical and electronic
equipment - Thermal management for cabinets in
accordance with IEC 60297 and IEC 60917 series -
Part 2: Method for the determination of forced air
cooling
40
155 IEC 62906-5-4:2018 Laser display devices - Part 5-4: Optical measuring
methods of colour speckle 51
156 BS IEC 62679-3-3:2016 Electronic paper displays. Optical measuring 44
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 13/25
methods for displays with integrated lighting units
Viễn thông Trở về đầu trang
157 IEC 62731:2018 Text-to-speech for television - General requirements 19
158
BS EN 62351-7:2017
Replaces: DD IEC/TS 62351-
7:2010
Power systems management and associated
information exchange. Data and communications
security. Network and System Management (NSM)
data object models
240
Công nghệ thông tin Trở về đầu trang
159 ISO/IEC 19286:2018 Identification cards — Integrated circuit cards —
Privacy-enhancing protocols and services 76
160 ISO/IEC 23000-16:2018
Information technology — Multimedia application
format (MPEG-A) — Part 16: Publish/Subscribe
Application Format
27
161 ISO/IEC TR 20547-2:2018
Information technology — Big data reference
architecture — Part 2: Use cases and derived
requirements
252
162 ISO/IEC 23000-19:2018
Information technology — Multimedia application
format (MPEG-A) — Part 19: Common media
application format (CMAF) for segmented media
106
163 ISO 17972-4:2018 Replaces;
ISO 17972-4:2015
Graphic technology — Colour data exchange format
(CxF/X) — Part 4: Spot colour characterisation data
(CxF/X-4)
13
164 ISO/IEEE 11073-
10424:2016/Cor.1:2018
Health informatics — Personal health device
communication - Part 10424: Device specialization -
Sleep apnoea breathing therapy equipment (SABTE)
TECHNICAL CORRIGENDUM 1
27
165 ISO/IEC/IEEE 8802-
1Q:2016/Amd.2:2018
Information technology — Telecommunications and
information exchange between systems — Local and
metropolitan area networks — Specific
requirements — Part 1Q: Bridges and bridged
networks AMENDMENT 2: Application virtual local
area network (VLAN) type, length, value (TLV)
89
166 ISO 19157:2013/Amd.1:2018
Geographic information — Data quality
AMENDMENT 1: Describing data quality using
coverages
6
167 ISO/IEC 23003-
4:2015/AMD1:2017
Amendment 1 - Information technology - MPEG
audio technologies - Part 4: Dynamic Range Control
- Parametric DRC, gain mapping and equalization
tools
139
168 ISO/IEC 23009-6:2017
Information technology - Dynamic adaptive
streaming over HTTP (DASH) - Part 6: DASH with
server push and WebSockets
35
169 ISO/IEC TR 38502:2017 Information technology - Governance of IT -
Framework and model 11
170 IEC 61131:2018 SER Programmable controllers - ALL PARTS 2049
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 14/25
171 ISO/IEC/IEEE 8802-
1Q:2016
Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements -
Part 1Q: Bridges and bridged networks
89
172 ISO/IEC 19286:2018 Identification cards - Integrated circuit cards -
Privacy-enhancing protocols and services 76
173 ISO/IEC TR 20547-2:2018
Information technology - Big data reference
architecture - Part 2: Use cases and derived
requirements
252
174 ISO/IEC 23000-16:2018
Information technology - Multimedia application
format (MPEG-A) - Part 16: Publish/Subscribe
Application Format
27
175 ISO/IEC 23000-19:2018
Information technology - Multimedia application
format (MPEG-A) - Part 19: Common media
application format (CMAF) for segmented media
106
176
177
BS ISO/IEC 14882:2017
Replaces: BS ISO/IEC
14882:2014
Programming languages. C++ 1620
178 BS ISO/IEC 11801-6:2017 Information technology. Generic cabling for
customer premises. Distributed building services 46
179 BS ISO/IEC 11801-2:2017 Information technology. Generic cabling for
customer premises. Office premises 32
Công nghệ ảnh Trở về đầu trang
180 ISO 12636:2018 Replaces:
ISO 12636:1998 Graphic technology - Blankets for offset printing 11
181 ISO/IEC 12034-1:2017 Information technology. Archive eXchanfe Format
(AXF). Par 1: Sructure and semantics 101
Phương tiện giao thông đường bộ Trở về đầu trang
182 ISO 20077-2:2018
Road Vehicles — Extended vehicle (ExVe)
methodology — Part 2: Methodology for designing
the extended vehicle
21
183 DIN EN 1762
Rubber hoses and hose assemblies for liquefied
petroleum gas, LPG (liquid or gaseous phase), and
natural gas up to 25 bar (2,5 MPa) - Specification;
German and English version prEN 1762:2018
45
Đường sắt Trở về đầu trang
184 IEC 62973-1:2018 PRV Railway applications - Batteries for auxiliary power
supply systems - Part 1: General requirements 76
185 BS EN 14478:2017 Replaces:
BS EN 14478:2005 Railway applications. Braking. Generic vocabulary 84
Đóng tàu và kết cấu tàu thủy Trở về đầu trang
186 ISO/PAS 21195:2018
Ships and marine technology — Systems for the
detection of persons while going overboard from
ships (Man overboard detection)
16
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 15/25
187 ISO 20313:2018 Ships and marine technology — Cathodic protection
of ships 56
188 IEC 60092:2018 SER Electrical installations in ships - ALL PARTS 1312
189 IEC 61097-7:1996+
AMD1:2018 CSV
Global maritime distress and safety system (GMDSS)
- Part 7: Shipborne VHF radiotelephone transmitter
and receiver - Operational and performance
requirements, methods of testing and required test
results
144
190 IEC 61162-460:2018 PRV
Maritime navigation and radiocommunication
equipment and systems - Digital interfaces - Part 460:
Multiple talkers and multiple listeners - Ethernet
interconnection - Safety and security
145
191
BS EN ISO 12217-2:2017
Replaces: BS EN ISO 12217-
2:2015
Small craft. Stability and buoyancy assessment and
categorization. Sailing boats of hull length greater
than or equal to 6 m
104
192 DIN 83407 Closing devices (fasteners) and fork plates for ship's
equipment 15
193 DIN 85051-1
Pressfitting systems for pipes for use in shipbuilding
- General requirements and test methods - Part 1:
Operating pressures up to 16 bar
28
194 DIN 86004-3
Ships and marine technology - Low-corrosion design,
measures and operation of pipework - Part 3: Plastic
piping systems
8
195 DIN 86015
Pipework of unplasticized polyvinyl chloride (PVC-
U) on ships, with solvent-cement joints - Use,
application, installation
23
196 DIN 86028 Welding necks of CuNi10Fe1,6Mn - Technical
specifications 9
197 DIN 86041-1 Welding flanges - Part 1: Tanks and sea boxes,
nominal pressure 10 and 16 8
198 DIN 86041-2 Welding flanges - Part 2: Outboard connections,
nominal pressure 10, 16, 40 8
199 DIN 86086 Fittings for butt welding into copper-nickel-alloy
pipelines - Technical specifications 10
Kỹ thuật máy bay và tàu vũ trụ Trở về đầu trang
200
ASTM F3066/F3066M-17
Replaces: ASTM
F3066/F3066M-15
Standard Specification for Aircraft Powerplant
Installation Hazard Mitigation 7
201 BS EN ISO 20785-1:2017 Dosimetry for exposures to cosmic radiation in
civilian aircraft. Conceptual basis for measurements 36
202 BS EN 2174:2017
Aerospace series. Heat resisting alloy FE-PA2602
(X4NiCrTiMoV26-15). Solution treated and
precipitation treated. Forgings. De ≤ 100 mm - Rm ≥
850 MPa
12
203 BS EN 4533-003:2017 Aerospace series. Fibre optic systems. Handbook. 22
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 16/25
Replaces: BS EN 4533-
003:2006
Looming and installation practices
204 DIN EN 2037
Aerospace series - Hexagonal steel bars drawn -
Dimensions - Tolerances h 11 and h 12; German and
English version EN 2037:2017
17
205 DIN EN 2306
Aerospace series - Heat resisting - Nickel base alloy
Ni-Cr20Co3Fe3 - Annealed - Bars; German and
English version EN 2306:2017
17
206 DIN EN 2369
Aerospace series - Wires, heat resisting alloys -
Diameter 0,2 mm <= D <= 8 mm - Dimensions;
German and English version FprEN 2369:2017
13
207 DIN EN 2812 Aerospace series - Stripping of electric cables;
German and English version FprEN 2812:2017 41
208 DIN EN 2850
Aerospace series - Carbon fibre thermosetting resin -
Unidirectional laminates - Compression test parallel
to fibre direction; German and English version EN
2850:2017
34
209 DIN EN 2944
Aerospace series - Inserts, screw thread, helical coil,
self-locking, in corrosion resisting steel FE-PA3004;
German and English version FprEN 2944:2017
19
210 DIN EN 3094
Aerospace series - Sealants - Test method -
determination of the application time; German and
English version EN 3094:2017
14
211 DIN EN 3155-004
Aerospace series - Electrical contacts used in
elements of connection - Part 004: Contacts,
electrical, male, type A, crimp, class T - Product
standard; German and English version FprEN 3155-
004:2017
32
212 DIN EN 3155-005
Aerospace series - Electrical contacts used in
elements of connection - Part 005: Contacts,
electrical, female, type A, crimp, class T - Product
standard; German and English version FprEN 3155-
005:2017
32
213 DIN EN 3475-701
Aerospace series - Cables, electrical, aircraft use -
Test methods - Part 701: Strippability and adherence
of insulation to the conductor; German and English
version EN 3475-701:2017
14
214 DIN EN 3475-707
Aerospace series - Cables, electrical, aircraft use -
Test methods - Part 707: Stabilization of assembly;
German and English version EN 3475-707:2017
10
215 DIN EN 3542
Aerospace series - Inserts, screw thread, helical coil,
self-locking, in heat resisting nickel base alloy NI-
PH2801 (Inconel X750); German and English
version FprEN 3542:2017
22
216 DIN EN 3745-506
Aerospace series - Fibres and cables, optical, aircraft
use - Test methods - Part 506: Impact resistance;
German and English version FprEN 3745-506:2017
18
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 17/25
217 DIN EN 3904
Aerospace series - Washers, wire locking in
aluminium alloy, anodized; German and English
version EN 3904:2017
14
218 DIN EN 4122
Aerospace series - Shank nuts, self-locking, in heat
resisting steel FE-PA2601 (A286), silver plated on
thread - Classification: 1100 MPa (at ambient
temperature) / 650 °C; German and English version
FprEN 4122:2017
16
219 DIN EN 4123
Aerospace series - Shank nuts, self-locking, in heat
resisting nickel base alloy NI-PH2601 (Inconel 718),
silver plated on thread - Classification: 1550 MPa (at
ambient temperature) / 600 °C; German and English
version FprEN 4123:2017
14
220 DIN EN 4124
Aerospace series - Shank nuts, self-locking, in heat
resisting nickel base alloy NI-PH1302 (Waspaloy),
silver plated on thread, for 60° swage -
Classification: 1210 MPa (at ambient temperature) /
730 °C; German and English version FprEN
4124:2017
16
221 DIN EN 4652-421
Aerospace series - Connectors, coaxial, radio
frequency - Part 421: Type 4, C interface - Crimp
assembly version - Right angle plug - Product
standard; German and English version EN 4652-
421:2017
26
222 DIN EN 4730
Aerospace series - Anthropometric dimensioning of
aircraft seats; German and English version FprEN
4730:2017
84
223 DIN EN 4839-001
Aerospace series - Arc fault circuit breakers, three-
poles, temperature compensated, rated current 3 A to
25 A - 115 V a.c. 400 Hz constant frequency - Part
001: Technical specification; German and English
version FprEN 4839-001:2017
43
224 DIN EN 4839-003
Aerospace series - Arc Fault Circuit breakers, three-
pole, temperature compensated, rated currents 3 A to
25 A, 115/200 V a.c. 400 Hz constant frequency -
Part 003: Without auxiliary contacts - Product
standard; German and English version FprEN 4839-
003:2017
26
225 DIN EN 4840-001
Aerospace series - Heat shrinkable moulded shapes -
Part 001: Technical specification; German and
English version FprEN 4840-001:2017
22
226 DIN EN 6018
Aerospace series - Test methods for metallic
materials - Determination of density according to
displacement method; German and English version
EN 6018:2017
10
227 DIN EN 6049-001 Aerospace series - Electrical cables, installation -
Protection sleeve in meta-aramid fibres - Part 001:
Technical specification; German and English version
34
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 18/25
FprEN 6049-001:2017
228 DIN EN 6049-003
Aerospace series - Electrical cables, installation -
Protection sleeve in meta-aramid fibres - Part 003:
Braided, tubular, expandable - Product standard;
German and English version FprEN 6049-003:2017
18
229 DIN EN 6109
Aerospace series - Static seal elements elastomer,
moulded, phosphate ester resistant - Technical
specification; German and English version FprEN
6109:2017
38
230 DIN EN 9115
Quality Management Systems - Requirements for
Aviation, Space and Defense Organizations -
Deliverable Software (Supplement to EN 9100);
German and English version FprEN 9115:2017
61
231 DIN EN 9146
Aerospace series - Foreign Object Damage (FOD)
Prevention Program - Requirements for Aviation,
Space, and Defence Organizations; German and
English version FprEN 9146:2017
22
232 DIN EN 9300-200
Aerospace series - LOTAR - LOng Term Archiving
and Retrieval of digital technical product
documentation such as 3D, CAD and PDM data -
Part 200: Common Concepts for Long term
Archiving and Retrieval of Product Structure
Information; German and English version FprEN
9300-200:2017
100
233 DIN EN 12016
Electromagnetic compatibility - Product family
standard for lifts, escalators and moving walks -
Immunity; German and English version prEN
12016:2018
50
Thiết bị xếp dỡ vật liệu Trở về đầu trang
234 BS EN ISO 16001:2017
Replaces: BS ISO 16001:2008
Earth-moving machinery. Object detection systems
and visibility aids. Performance requirements and
tests
82
235 DIN EN 1175*VDE 0117 Safety of industrial trucks - Electrical/electronic
requirements; German version prEN 1175:2017 196
Nông nghiệp Trở về đầu trang
236 ISO 4254-8:2018 Replaces:
ISO 4254-8:2009
Agricultural machinery — Safety — Part 8: Solid
fertilizer distributors 16
Công nghệ thực phẩm Trở về đầu trang
237 DIN 10500/A2
Food hygiene - Sales vehicles and mobile sales
stands for perishable foodstuffs - Hygiene
requirements, testing; Amendment 2
6
238 DIN 10503 Beiblatt 1
Food hygiene; Supplement 1: Flow diagram for the
utilization in the HACCP-concept - Symbols, kind of
presentation
12
239 DIN EN 12042/A1 Food processing machinery - Automatic dough
dividers - Safety and hygiene requirements; German 18
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 19/25
and English version EN 12042:2014/prA1:2017
Công nghệ hóa chất Trở về đầu trang
240 ISO 19619:2018
Surface active agents — Determination of free
propylene oxide content in propylene oxide adduct
surfactants — GC method
10
241 ASTM D2712-17 Replaces:
ASTM D2712-91(2010)
Standard Test Method for Determination of
Hydrocarbon Impurities in High Purity Propylene by
Gas Chromatography
6
242 DIN 28125-4 Hinged closures - Round - Part 4: Light Version,
Nominal Diameter DN 150 to DN 800 13
243 DIN 51918 Testing of carbonaceous materials - Determination of
bulk density and the open porosity 10
244 DIN EN 1406
Chemicals used for treatment of water intended for
human consumption - Modified starches; German
version EN 1406:2017
20
Khai thác mỏ và khoáng sản Trở về đầu trang
245 BS EN ISO 19225:2017
Replaces: BS EN 1552:2003
Underground mining machines. Mobile extracting
machines at the face. Safety requirements for shearer
loaders and plough systems
36
246 DIN 21907 Mine plans - Graphic design of sheets 29
Dầu mỏ Trở về đầu trang
247 ISO 6743-6:2018 Replaces;
ISO 6743-6:1990
Lubricants, industrial oils and related products (class
L) — Classification — Part 6: Family C (gear
systems)
8
248
ISO 12925-1:2018 Replaces:
ISO 12925-1:1996; ISO
12925-1:1996/Cor 1:2002
Lubricants, industrial oils and related products (class
L) — Family C (gears) — Part 1: Specifications for
lubricants for enclosed gear systems
44
249 ASTM D5762-17 Replaces:
ASTM D5762-12
Standard Test Method for Nitrogen in Liquid
Hydrocarbons, Petroleum and Petroleum Products by
Boat-Inlet Chemiluminescence
7
250 ASTM D7826-17a Replaces:
ASTM D7826-16
Standard Guide for Evaluation of New Aviation
Gasolines and New Aviation Gasoline Additives 23
251 BS EN ISO 15589-1:2017
Petroleum, petrochemical and natural gas industries.
Cathodic protection of pipeline systems. On-land
pipelines
90
252
BS EN ISO 4259-1:2017
Replaces: BS EN ISO
4259:2006, BS 2000-367:2006
Petroleum and related products. Precision of
measurement methods and results. Determination of
precision data in relation to methods of test
84
253
BS EN ISO 4259-2:2017
Replaces: BS EN ISO
4259:2006, BS 2000-367:2006
Petroleum and related products. Precision of
measurement methods and results. Interpretation and
application of precision data in relation to methods of
test
32
254
BS EN 13399:2017 Replaces:
BS EN 13399:2010, BS 2000-
517:2010
Bitumen and bituminous binders. Determination of
storage stability of modified bitumen 10
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 20/25
255 DIN 5499 Gross and Net Calorific Values - Terms 9
256 DIN 51430
Testing of fuel oil - Determination of red dye content
and Solvent Yellow 124 in domestic fuel oil and
mixtures of domestic fuel oil with unmarked mineral
oil - High performance liquid cromatography (HPLC)
12
257 DIN 51774-1
Testing of liquid fuels - Part 1: Determination of
bromine acceptance by electrometric Dead-Stop-
method of samples with a bromine acceptance of
more than 0,5 g/100 g (BA)
12
258 DIN 51808 Testing of lubricants - Determination of oxidation
stability of greases - Oxygen method 14
Luyện kim Trở về đầu trang
259
ISO 11437:2018 Replaces:
ISO 11437-1:1994; ISO
11437-2:1994
Nickel alloys — Determination of lead —
Electrothermal atomic absorption spectrometric
method
15
260 ISO 6507-3:2018 Replaces:
ISO 6507-3:2005
Metallic materials — Vickers hardness test — Part 3:
Calibration of reference blocks 15
261 ISO 6507-2:2018 Replaces:
ISO 6507-2:2005
Metallic materials — Vickers hardness test — Part 2:
Verification and calibration of testing machines 18
262 ISO 6507-1:2018 Replaces;
ISO 6507-1:2005
Metallic materials — Vickers hardness test — Part 1:
Test method 30
263
ASTM A484/A484M -18
Replaces: ASTM
A484/A484M-16
Standard Specification for General Requirements for
Stainless Steel Bars, Billets, and Forgings 13
264 ASTM F3213-17
Standard for Additive Manufacturing #x2013;
Finished Part Properties #x2013; Standard
Specification for Cobalt-28 Chromium-6
Molybdenum via Powder Bed Fusion
9
265 BS ISO 11437:2018 Nickel alloys. Determination of lead. Electrothermal
atomic absorption spectrometric method 22
266 DIN 50938 Black oxide coatings on ferrous metal components -
Requirements and test methods 11
267 DIN EN 10139/A1
Cold rolled uncoated low carbon steel narrow strip
for cold forming - Technical delivery conditions;
German and English version EN
10139:2016/prA1:2018
14
Công nghệ chế biến gỗ Trở về đầu trang
268 DIN 68800-1/A1 Wood preservation - Part 1: General 7
269 DIN EN 384/A1
Structural timber - Determination of characteristic
values of mechanical properties and density; German
and English version EN 384:2016/prA1:2018
10
270 DIN EN 844 Round and sawn timber - Terminology; Trilingual
version prEN 844:2018 63
271 DIN EN 847-1 Tools for woodworking - Safety requirements - Part
1: Milling tools, circular saw blades; German version 41
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 21/25
EN 847-1:2017
272 DIN EN 847-2
Tools for woodworking - Safety requirements - Part
2: Requirements for the shank of shank mounted
milling tools/circular saw blades; German version EN
847-2:2017
25
273 DIN 68800-1/A1 Wood preservation - Part 1: General 7
Thủy tinh và gốm Trở về đầu trang
274 ASTM C1211-18 Replaces:
ASTM C1211-13
Standard Test Method for Flexural Strength of
Advanced Ceramics at Elevated Temperatures 17
275 ASTM C1684-18 Replaces:
ASTM C1684-13e1
Standard Test Method for Flexural Strength of
Advanced Ceramics at Ambient
Temperature#x2014;Cylindrical Rod Strength
21
Cao su và chất dẻo Trở về đầu trang
276 ASTM D1646-17 Replaces:
ASTM D1646-07(2012)
Standard Test Methods for Rubber#x2014;Viscosity,
Stress Relaxation, and Pre-Vulcanization
Characteristics (Mooney Viscometer)
12
277
BS EN ISO 1825:2017
Repalces: BS EN ISO
1825:2011
Rubber hoses and hose assemblies for aircraft ground
fuelling and defuelling. Specification 34
278
BS EN ISO 10350-1:2017
Replaces: BS EN ISO 10350-
1:2008+A1:2014
Plastics. Acquisition and presentation of comparable
single-point data. Moulding materials 22
279 DIN 53435 Testing of Plastics - Bending test and impact test on
dynstat test pieces 29
280 DIN 53477
Testing of plastics - Determination of particle size
distribution of moulding materials by dry sieving
analysis
8
281 DIN EN 301
Adhesives, phenolic and aminoplastic, for load-
bearing timber structures - Classification and
performance requirements; German version EN
301:2017
20
Giấy Trở về đầu trang
282
BS EN ISO 287:2017
Replaces: BS EN ISO
287:2009
Paper and board. Determination of moisture content
of a lot. Oven-drying method 18
Sơn và chất màu Trở về đầu trang
283 ISO 6270-3:2018
Paints and varnishes — Determination of resistance
to humidity — Part 3: Condensation (in-cabinet
exposure with heated, bubbling water reservoir)
7
284 ASTM D7723-17
Standard Test Method for Rubber
Property#x2014;Macro-Dispersion of Fillers in
Compounds
4
285
BS EN ISO 2812-4:2017
Replaces: BS EN ISO 2812-
4:2007
Paints and varnishes. Determination of resistance to
liquids. Spotting methods 14
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 22/25
286
BS EN ISO 2812-1:2017
Replaces: BS EN ISO 2812-
1:2007
Paints and varnishes. Determination of resistance to
liquids. Immersion in liquids other than water 14
287
BS EN ISO 12944-3:2017
Replaces: BS EN ISO 12944-
3:1998
Paints and varnishes. Corrosion protection of steel
structures by protective paint systems. Design
considerations
22
288
BS EN ISO 12944-1:2017
Replaces: BS EN ISO 12944-
1:1998
Paints and varnishes. Corrosion protection of steel
structures by protective paint systems. General
introduction
16
289
BS EN ISO 12944-8:2017
Replaces: BS EN ISO 12944-
8:1998
Paints and varnishes. Corrosion protection of steel
structures by protective paint systems. Development
of specifications for new work and maintenance
44
290 DIN 55655-11 Paints and varnishes - Electro-deposition paints - Part
11: Bath stability 6
291 DIN 55655-12 Paints and varnishes - Electro-deposition paints - Part
12: Sedimentation on horizontal areas 7
Vật liệu xây dựng Trở về đầu trang
292 ASTM C782 -13(2018) Standard Test Method for Softness of Preformed
Tape Sealants 2
293 ASTM C892-17 Replaces:
ASTM C892-10
Standard Specification for High-Temperature Fiber
Blanket Thermal Insulation 10
294 ASTM C907-17(2018)
Replaces: ASTM C907-17
Standard Test Method for Tensile Adhesive Strength
of Preformed Tape Sealants by Disk Method 3
295
ASTM C1385/C1385M-
10(2017) Replaces: ASTM
C1385/C1385M-10
Standard Practice for Sampling Materials for
Shotcrete 2
296
ASTM C1527/C1527M-
11(2018) Replaces: ASTM
C1527/C1527M-11
Standard Specification for Travertine Dimension
Stone 2
297
ASTM D2203 -01(2018)
Replaces: ASTM D2203-
01(2007)
Standard Test Method for Staining from Sealants 3
298 ASTM D4124-09(2018)
Replaces: ASTM D4124-01
Standard Test Method for Separation of Asphalt into
Four Fractions 8
299 ASTM F2419-11(2017)
Replaces: ASTM F2419-11
Standard Practice for Installation of Thick Poured
Gypsum Concrete Underlayments and Preparation of
the Surface to Receive Resilient Flooring
3
300 DIN 1946-6
Ventilation and air conditioning - Part 6: Ventilation
for residential buildings - General requirements,
requirements for design, construction, commissioning
and handover as well as maintenance
130
301 DIN 4109-1 Sound insulation in buildings - Part 1: Minimum
requirements 30
302 DIN 4109-2 Sound insulation in buildings - Part 2: Verification of
compliance with the requirements by calculation 88
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 23/25
303 DIN 18550-1
Design, preparation and application of external
rendering and internal plastering - Part 1:
Supplementary provisions for DIN EN 13914-
1:2016-09 for external rendering
22
304 DIN 18550-2
Design, preparation and application of external
rendering and internal plastering - Part 2:
Supplementary provisions for DIN EN 13914-
2:2016-09 for internal plastering
25
305 DIN EN 115-1
Safety of escalators and moving walks - Part 1:
Construction and installation; German version EN
115-1:2017
128
306 DIN EN 1015-11
Methods of test for mortar for masonry - Part 11:
Determination of flexural and compressive strength
of hardened mortar; German and English version
prEN 1015-11:2017
15
307 DIN EN 1097-2
Tests for mechanical and physical properties of
aggregates - Part 2: Methods for the determination of
resistance to fragmentation; German and English
version prEN 1097-2:2018
91
308 DIN EN 1097-8
Tests for mechanical and physical properties of
aggregates - Part 8: Determination of the polished
stone value; German and English version prEN 1097-
8:2018
76
309 DIN EN 1337-1 Structural bearings - Part 1: General; German and
English version prEN 1337-1:2018 167
310 DIN EN 1337-2 Structural bearings - Part 2: Sliding elements;
German and English version prEN 1337-2:2018 166
311 DIN EN 1337-3 Structural bearings - Part 3: Elastomeric bearings;
German and English version prEN 1337-3:2018 173
312 DIN EN 1337-4 Structural bearings - Part 4: Roller bearings; German
and English version prEN 1337-4:2018 62
313 DIN EN 1337-5 Structural bearings - Part 5: Pot bearings; German
and English version prEN 1337-5:2018 117
314 DIN EN 1337-6 Structural bearings - Part 6: Rocker bearings;
German and English version prEN 1337-6:2018 54
315 DIN EN 1337-7
Structural bearings - Part 7: Spherical and cylindrical
PTFE bearings; German and English version prEN
1337-7:2018
50
316 DIN EN 1337-8
Structural bearings - Part 8: Guide bearings and
Restraint bearings; German and English version
prEN 1337-8:2018
29
317 DIN EN 12098-3
Energy Performance of Buildings - Controls for
heating systems - Part 3: Control equipment for
electrical heating systems - Modules M3-5, 6, 7, 8;
German version EN 12098-3:2017
35
318 DIN EN 12098-5 Energy Performance of Buildings - Controls for 24
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 24/25
heating systems - Part 5: Start-stop schedulers for
heating systems - Modules M3-5, 6, 7, 8; German
version EN 12098-5:2017
319 DIN EN 12440 Natural stone - Denomination criteria; German
version EN 12440:2017 113
320 DIN EN 13126-8
Building hardware - Hardware for windows and door
height windows - Part 8: Requirements and test
methods for Tilt and Turn, Tilt-First and Turn-Only
hardware; German version EN 13126-8:2017
35
321 DIN EN 13126-15
Building hardware - Hardware for windows and door
height windows - Requirements and test methods -
Part 15: Rollers for horizontal sliding and hardware
for sliding folding windows; German and English
version prEN 13126-15:2017
65
322 DIN EN 13126-16
Building hardware - Hardware for windows and door
height windows - Requirements and test methods -
Part 16: Hardware for Lift and Slide windows;
German and English version prEN 13126-16:2018
62
323 DIN EN 13126-17
Building hardware - Hardware for windows and door
height windows - Requirements and test methods -
Part 17: Hardware for Tilt and Slide windows;
German and English version prEN 13126-17:2018
65
324 DIN EN 13138-1
Buoyant aids for swimming instruction - Part 1:
Safety requirements and test methods for buoyant
aids to be worn; German and English version prEN
13138-1:2018
84
325 DIN EN 13203-5
Gas-fired domestic appliance producing hot water -
Part 5: Assessment of energy consumption of gas
fired appliances combined with electrical heat pump;
German and English version FprEN 13203-5:2018
108
Xây dựng dân dụng Trở về đầu trang
326
ASTM E950/E950M-
09(2018) Replaces: ASTM
E950-98(2004)
Standard Test Method for Measuring the
Longitudinal Profile of Traveled Surfaces with an
Accelerometer-Established Inertial Profiling
Reference
6
327
ASTM E1927-98(2018)
Replaces: ASTM E1927-
98(2007)
Standard Guide for Conducting Subjective Pavement
Ride Quality Ratings 8
328 DIN EN 12697-13
Bituminous mixtures - Test methods - Part 13:
Temperature measurement; German version EN
12697-13:2017
9
329 DIN EN 12697-53
Bituminous mixtures - Test methods - Part 53:
Cohesion increase by spreadability-meter method;
German and English version prEN 12697-53:2018
25
330 DIN EN 12697-54 Bituminous mixtures - Test methods - Part 54:
Curing of specimen for test of mixtures with bitumen
emulsion; German and English version prEN 12697-
24
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 01&02/2018 25/25
54:2018
331 DIN EN 12697-55
Bituminous mixtures - Test methods - Part 55:
Organoleptic assessment of compatibility of
constituent materials of a mixture with bitumen
emulsion; German and English version prEN 12697-
55:2018
21
332 DIN EN 12697-56
Bituminous mixtures - Test methods - Part 56:
Specimen preparation by static compaction; German
and English version prEN 12697-56:2018
20
333 DIN EN 13108-31
Bituminous mixtures - Material specifications - Part
31: Asphalt Concrete with Bituminous Emulsion;
German and English version prEN 13108-31:2018
85
Thiết bị gia dụng và thương mại giải trí. Thể thao Trở về đầu trang
334 ISO 19448:2018
Dentistry — Analysis of fluoride concentration in
aqueous solutions by use of fluoride ion-selective
electrode
11
335 ISO 23537-1:2016/
Amd.1:2018
Requirements for sleeping bags — Part 1: Thermal
and dimensional requirements AMENDMENT 1 1
336 ASTM F406-17 Replaces:
ASTM F406-13
Standard Consumer Safety Specification for Non-
Full-Size Baby Cribs/Play Yards 43
337 ASTM F2376-17a Replaces:
ASTM F2376-17
Standard Practice for Classification, Design,
Manufacture, Construction, and Operation of Water
Slide Systems
10
338 BS EN ISO 20957-10:2017
Replaces; BS EN 957-10:2005
Stationary training equipment. Exercise bicycles with
a fixed wheel or without freewheel. Additional
specific safety requirements and test methods
18
339 DIN 15901 Entertainment technology - Two-pin connectors for
stage lighting 18
340 DIN 79161-1/A1 Playground inspection - Qualification of playground
inspectors - Part 1: Training and education 6
341 DIN 79161-2/A1
Playground inspection - Qualification of playground
inspectors - Part 2: Examination and verification of
qualification
4
Để có toàn văn các tiêu chuẩn trên hoặc các tiêu chuẩn khác, vui lòng liên hệ:
Quầy dịch vụ tham khảo – Thư viện Trường ĐH Công nghiệp TP. HCM
12 Nguyễn Văn Bảo, Phường 4, Quận Gò Vấp, TP. HCM
Email: [email protected]
Điện thoại: 083.8940 390 – 131.