title: p15 2014 05 spillex supersedes: issue 2 used in...

Freudenberg Home and Cleaning Solutions GmbH

Product SpecificationTitle: P15_2014_05_SpillExNo: 202500 Issue: 3 Effective Date: October 31, 2014Supersedes: Issue 2 Used in (Plant/s): Absorbest AB, SwedenCategory: Professional Resource: Gleich, ThorstenReason for Change: Printing pantone color added Expires: until supersededMaterial Master No.: 526230

of 4

Signatures Approvers, Authorized Representatives electronically on file.Confidential information, only for internal use, unauthorized copying strictly forbidden.

HS – Code4 8 1 1 9 0

Certificate of AnalysisThe supplier guarantees that all deliveries meet the product requirements. Test reports and inspectiondata available on request with all deliveries and the supplier must deliver a “Certificate of Analysis”(CoA) per shipment and/ or lot. Production MethodStep 1: Production of core material (laminate) as roll goods in machine 1. Step 2: Production of finished products – laminate roll, nonwoven roll and foil roll go into machine 2 –machine cuts and hot-melt-glues product along the edges. Product DescriptionDisposable floor pad for maximum absorbency of water based liquids, for example: water, salinesolution and urine. A minimum absorbency in free swell of tap water: 2.2 liter and free swell of salinesolution NaCl 0.9%: 1 liter.

1-product overview2-back side with printed foil (artwork see page 4, pic. 1&2)3- absorbency side with hydrophilic non-woven

Product picture “SpillEx”Product Composition/ComponentsStarting material Spec Id. Name Unit Amount22 gsm-HI-standard, 2013-11-26 PP- Nonwoven % 9.5422736-3, 2014/06/05 PE- Foil % 12Diaper Tissue Closed, 2014-02-25 Cellulose tissue % 17No. 2012-08-24_7000039326 Sodium poly acrylate SAP % 602450010-Datablad 2010-04-15/JE Hot melt glue % 1.5



of 4


Nonwoven (according to: 22 gsm-HI-standard, 2013-11-26)

Composition ofNonwoven

100% spun bond polypropylene with hydrophilic agent

QA-Method Unit Target Min Max Freq. Weight per unit area WSP 130.1 g/m² 22 19 25

Each delivery(with

nonwovenCoA)

Tensile strength, MD WSP 110.4 N/50mm 46 29 N/A Elongation, MD at peak WSP 110.4 % 50 15 N/A Tensile strength, CD WSP 110.4 N/50mm 27 16 N/A Elongation CD at peak WSP 110.4 % 55 22 N/A Appearance Even structure w/o defects e.g. holes Each delivery

Absorbent core (laminate): Superabsorbent: Agreement of Specification No. 2012-08-24_7000039326 andCellulose tissue: Diaper Tissue Closed, 2014-02-25)

Composition 3 cellulose tissues layers: top, bottom and middle of the core with sodium polyacrylatesuper absorber particles

QA-Method Unit Target Min Max Freq.

Weight per unit area Calibratedscale g/m² 230 195 265

Beginning andend of

laminate roll

Laminate roll width Metal ruler mm 320 315 325Beginning and

end oflaminate roll

Foil (according to doc no: 422736-3, 2014-06-05) Composition of Foil 100% Polyethylene (MDPE type) QA-Method Unit Target Min Max Freq

Thickness Supplier ownmethod µm 30 -5% +5%

Camera control atsupplier + manualat start and shift

change at supplier Color/printing Acc. to below agreed Pantone color and design Stability of printing Printing should be stable against water, saline solution 0.9% Appearance Clean, even surface without wrinkles, faults, printing clear and without faults

Adhesive (according to: 2450010-Datablad 2010-04-15/JE) Type Hot-melt-glue (Polyolefin type)



of 4


End ProductProduct Characteristics

Items QA-Method Unit Target Min Max Freq. AQL*

Weight of pad Calibratedscale g 44 37 51 Each 4 hours one

sample 2.5

Core length Metal ruler mm 460 455 465 Each 4 hours onesample 2.5

Core width Metal ruler mm 320 315 325 Each 4 hours onesample 2.5

Product length Metal ruler mm 510 500 520 Each 4 hours onesample 2.5

Product width Metal ruler mm 368 360 375 Each 4 hours onesample 2.5

Optical appearance oflamination/gluing

Visualinspection - · no holes in glued edges

· straight seamEach 4 hours one

sample 2.5

Production testing forproduct sealing (Fillingproduct to maximumabsorbency of water,put under 40 kg forcefor 5 min and thenshake gel towards theedges)

Absorbesttest methodSOP P14

(general) andproduct

testing reportsystem

Count(OK/not

OK)

No gelleakageinsealing

N/A OK Each 4 hoursone sample 2.5

Overlapping foil andnon-woven (see page 4, pic. 3)

Visualinspection-Metal ruler

mm 0 N/A 5 Each 4 hoursone sample 2.5

*In case of defects AQL according to ISO 2859-1 or FHP Spec ID 400028 inspection level S-3 Absorbest guarantees a minimum tap water free swell absorption capacity of 2.2 liters per product. Storage Requirements Cool and dry place, away from direct sunlight and odors. Consumer Risk Potential / Product SafetyThe supplier guarantees that the material does not containPVC, heavy metals, formaldehyde, radioactive materials/substances, Azo dyes or any harmfulsubstances/agents/additives that are in conflict with Regulation EU/10/2011. For Europe this is also covered by ECHA's list for "Substances of Very High Concern"(see official website: http://echa.europa.eu/candidate-list-table)No materials listed there must be used in the starting materials and / or in the finished product. ThisSVHC-list is under constant expansion.

http://echa.europa.eu/candidate-list-table



of 4


Attachments Picture

1&2foilprintingartwork

Artwork of the foil printing:

Dimension of the foil printing:

Picture 3overlapping foiland non-woven

(c+) Pantonecolor ofprinting

title: p15 2014 05 spillex supersedes: issue 2 used in...

Documents