tisi library accession list (january-march...

TISI Library Accession List (Jan-Mar 2007)

TISI Library Accession List(January-March 2007)

ABRASION STANSA

SANS 5316 2005 Abrasion resistance of textile shoe laces (without core) and similar articles /ByStandards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2005.

ACCIDENT PREVENTION STANSA

SANS 60479-4 2005 Effects of current on human beings and livestock - P.4: Effects of lightningstrokes on human beings and livestock /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

ACOUSTICS ISO

ISO 389-7 2005 Acoustics - Reference zero for the calibration of audiometric equipment - P.7:Reference threshold of hearing under free-field and diffuse-field listening conditions /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

AGRICULTURAL PRODUCTS ISO

ISO 5943 2006 Cheese and processed cheese products - Determination of chloride content -Potentiometric titration method /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006.

STANSA SANS 10385-1 2005 Requirements for the implementation of an identity preservation system (IP

system) - P.1: IP system for the production, storage, handling and transportation of non-genetically modifiedunprocessed agricultural products /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

AIR FREIGHTERS ISO ISO 6966-1 2005 Aircraft ground equipment - Basic requirements - P.1: General design

requirements /By International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 6968 2005 Aircraft ground equipment - Lower deck loader - Functional requirements /By

International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.


AIR TREATMENT DEVICES STANSA

SANS 60335-2-98 2005 Household and similar electrical appliances - Safety - P.2-98: Particularrequirements for humidifiers /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.

AIR VALVES AWWA

ANSI/AWWA C512 2004 Air-release, air/vacuum, and combination air valves for waterworks service/By American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2004.

AIR VALVES - WATERWORKS AWWA


AIRCRAFT COMPONENTS ISO

ISO 6966-1 2005 Aircraft ground equipment - Basic requirements - P.1: General designrequirements /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 6968 2005 Aircraft ground equipment - Lower deck loader - Functional requirements /ByInternational Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.

ALARM SYSTEMS ISO ISO 7240-1 2005 Fire detection and alarm systems - P.1: General and definitions /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005. ISO 7240-11 2005 Fire detection and alarm systems - P.11: Manual call points /By International

Organization for Standardization (ISO). Geneva: ISO, 2005.

STANSA

SANS 60849 2005 Sound systems for emergency purposes /By Standards South Africa (STANSA).Pretoria: STANSA, 2005.


ALUMINIUM ALLOYS JSA JIS H1352 1997 Methods for determination of silicon in aluminium and aluminium alloys /By

Japanese Standards Association (JSA). Tokyo: JSA, 1997. JIS H1360 1997 Methods for determination of nickel in aluminium and aluminium alloys /By

Japanese Standards Association (JSA). Tokyo: JSA, 1997. JIS H1361 1997 Methods for determination of tin in aluminium and aluminium alloys /By Japanese

Standards Association (JSA). Tokyo: JSA, 1997.

ARC LAMPS ISO

ISO 4892-2 2006 Plastics - Methods of exposure to laboratory light sources - P.2: Xenon-arc lamps/By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ARMOURED CABLES BSI

BS 7889 1997 600/1000 V single-core unarmoured electric cables having thermosetting insulation/By British Standards Institution (BSI). London: BSI, 1997.

ASBESTOS CEMENT AWWA

ANSI/AWWA C603 2005 Installation of asbestos - Cement pressure pipe /By American Water WorksAssociation (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

AUDIO EQUIPMENT IEC

IEC 60065 2005 Audio, video and similar electronic apparatus - Safety requirements /ByInternational Electrotechnical Commission (IEC). 7th ed. Geneva: IEC, 2005.

AUDIOMETERS ISO



AUDIOMETRY ISO


AUDITORY THRESHOLD ISO


AUTOTRANSFORMERS STANSA

SANS 60076-11 2005 Power transformers - P.11: Dry-type transformers /By Standards South Africa(STANSA). Pretoria: STANSA, 2005.

BALL VALVES AWWA

ANSI/AWWA C507 2005 Ball valves, 6 In. through 48 In. (150 mm through 1,200 mm) /By AmericanWater Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

BARRELS (CONTAINERS) AWWA

ANSI/AWWA C502 2005 Dry-barrel fire hydrants /By American Water Works Association (AWWA)and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA C503 2005 Wet-barrel fire hydrants /By American Water Works Association (AWWA)and American National Standards Institute (ANSI). Denver: AWWA, 2005.

BARS (MATERIALS) DSM

MS 1494 2000 Billets for hot rolled non-alloyed steel bars and rods /By Department of StandardsMalaysia (DSM). Selangor D.E.: DSM, 2000.


BEAMS DSM

MS 1496 2000 Beam blanks for hot rolled non-alloyed structural steel sections /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2000.

BILLETS DSM

MS 1494 2000 Billets for hot rolled non-alloyed steel bars and rods /By Department of StandardsMalaysia (DSM). Selangor D.E.: DSM, 2000.

BIOLOGICAL ANALYSIS AND TESTING DSM

MS 1044 P.3 1998 Mosquito vaporizing mats : P.3: Method for the evaluation of biological efficacy -Glass cylinder method /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 1998.

BLOOMS DSM

MS 1495 2000 Blooms for hot rolled non-alloyed structural steel sections /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2000.

BRAKES STANSA

SANS 10256 2005 Brake drum reconditioning /By Standards South Africa (STANSA). Pretoria:STANSA, 2005.

SANS 10310 2005 The manufacture and reconditioning of replacement brake lining assemblies /ByStandards South Africa (STANSA). Pretoria: STANSA, 2005.

BRAKING SYSTEM COMPONENTS STANSA

SANS 10256 2005 Brake drum reconditioning /By Standards South Africa (STANSA). Pretoria:STANSA, 2005.

SANS 10310 2005 The manufacture and reconditioning of replacement brake lining assemblies /ByStandards South Africa (STANSA). Pretoria: STANSA, 2005.


BRICKS ISO

ISO 5019-6 2005 Refractory bricks - Dimensions - P.6: Basic bricks for oxygen steel-makingconverters /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

BUILDINGS BSI

BS EN 1991-3 2006 Eurocode 1 - Actions on structures - P.3: Actions induced by cranes andmachinery /By British Standards Institution (BSI). London: BSI, 2006.

DSM

MS 1064 P.1 2001 Guide to modular coordination in buildings - P.1: General principles /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

BUTTERFLY VALVES AWWA

ANSI/AWWA C504 2006 Rubber-seated butterfly valves /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2006.

CALIBRATION ISO


CARDS STANSA SANS 7816-1 1998 Identification cards - Integrated circuit (s) cards with contacts - P.1: Physical

characteristics /By Standards South Africa (STANSA). Pretoria: STANSA, 1998. SANS 7816-2 1999 Identification cards - Integrated circuit cards - P.2: Cards with contacts -

Dimensions and location of the contacts /By Standards South Africa (STANSA). Pretoria: STANSA, 1999.

SANS 7816-3 1997 Information technology - Identification cards - Integrated circuit(s) cards withcontacts - P.3: Electronic signals and transmission protocols /By Standards South Africa (STANSA). Pretoria:STANSA, 1997.


SANS 7816-6 2005 Identification cards - Integrated circuit cards - P.6: Interindustry data elementsfor interchange /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.

SANS 7816-15 2005 Identification cards - Integrated circuit cards - P.15: Cryptographic informationapplication /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

CASTINGS ISO

ISO 4991 2005 Steel castings for pressure purposes /By International Organization forStandardization (ISO). 2nd ed. Geneva: ISO, 2005.

CEMENT MORTAR AWWA

ANSI/AWWA C602 2006 Cement mortar lining of water pipelines in place - 4 in. (100 mm) andlarger /By American Water Works Association (AWWA) and American National Standards Institute (ANSI).Denver: AWWA, 2006.

CEMENTS

AWWA

ANSI/AWWA C602 2006 Cement mortar lining of water pipelines in place - 4 in. (100 mm) andlarger /By American Water Works Association (AWWA) and American National Standards Institute (ANSI).Denver: AWWA, 2006.

BSI

BS EN 196-1 2005 Methods of testing cement - P.1: Determination of strength /By British StandardsInstitution (BSI). London: BSI, 2005.

BS EN 196-3 2005 Methods of testing cement - P.3: Determination of setting times and soundness/By British Standards Institution (BSI). London: BSI, 2005.

CHECK VALVES

AWWA

ANSI/AWWA C510 1997 Double check valve backflow prevention assembly /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 1997.


CHEESE ISO

ISO 5943 2006 Cheese and processed cheese products - Determination of chloride content -Potentiometric titration method /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO,2006.

CHEMICAL ANALYSIS AND TESTING ISO

ISO 5943 2006 Cheese and processed cheese products - Determination of chloride content -Potentiometric titration method /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO,2006.

CHEMICAL REAGENTS BIS

IS 505 1995 Light kaolin /By Bureau of Indian Standards (BIS). 3rd ed. New Delhi: BIS, 1995.

CHLORIDES ISO

ISO 5943 2006 Cheese and processed cheese products - Determination of chloride content -Potentiometric titration method /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006.

CLAY BIS

IS 2840 2002 China clay for ceramic industry /By Bureau of Indian Standards (BIS). 2nd ed. NewDelhi: BIS, 2002.

CLEANING MATERIALS DSM MS 1285 2001 Glass cleaner /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

CLOTH STANSA

SANS 5412 2005 Degree of blocking of coated textile fabrics /By Standards South Africa (STANSA).3rd ed. Pretoria: STANSA, 2005.


CLOTHING STANSA

SANS 5369 2005 Dimensions of hosiery /By Standards South Africa (STANSA). 3rd ed. Pretoria:STANSA, 2005.

COATED FABRICS STANSA


COATING PROCESSES STANSA

SANS 10064 2005 The preparation of steel surfaces for coating /By Standards South Africa(STANSA). 3rd ed. Pretoria: STANSA, 2005.

COATINGS STANSA SANS 10064 2005 The preparation of steel surfaces for coating /By Standards South Africa

(STANSA). 3rd ed. Pretoria: STANSA, 2005. SANS 12944-1 1998 Paints and varnishes - Corrosion protection of steel structures by protective

paint systems - P.1: General introduction /By Standards South Africa (STANSA). Pretoria: STANSA, 1998. SANS 12944-2 1998 Paints and varnishes - Corrosion protection of steel structures by protective

paint systems - P.2: Classification of environments /By Standards South Africa (STANSA). Pretoria:STANSA, 1998.

SANS 12944-4 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.4: Types of surface and surface preparation /By Standards South Africa (STANSA).Pretoria: STANSA, 1998.

SANS 12944-7 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.7: Execution and supervision of paint work /By Standards South Africa (STANSA).Pretoria: STANSA, 1998.

SANS 12944-8 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.8: Development of specifications for new work and maintenance /By Standards SouthAfrica (STANSA). Pretoria: STANSA, 1998.


COBALT ALLOYS ISO ISO 5832-5 2005 Implants for surgery - Metallic materials - P.5: Wrought cobalt-chromium-tungsten-

nickel alloy /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.

CODED REPRESENTATION STANSA SANS 3166-3 2005 Codes for the representation of names of countries and their subdivisions - P.3:

Code for formerly used names of countries /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

CODES STANSA SANS 3166-3 2005 Codes for the representation of names of countries and their subdivisions - P.3:

Code for formerly used names of countries /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

COFFEE ISO ISO 3509 2005 Coffee and coffee products - Vocabulary /By International Organization for

Standardization (ISO). 4th ed. Geneva: ISO, 2005.

COLOUR-FASTNESS TESTS ISO ISO 105-C10 2006 Textiles - Tests for colour fastness - P.C10: Colour fastness to washing with

soap or soap and soda /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 105-E05 2006 Textiles - Tests for colour fastness - P.E05: Colour fastness to spotting: Acid /By

International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006. ISO 105-E06 2006 Textiles - Test for colour fasness - P.E06: Colour fastness to spotting: Alkali /By

International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006.

COMPRESSED GASES DSM MS 1204 2001 Code of practice for CNG compressor refuelling stations : on site storage and

location of equipment /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

ISO ISO/TR 15403-2 2006 Natural gas - Natural gas for use as a compressed fuel for vehicles - P.2:

Specification of the quality /By International Organization for Standardization (ISO). Geneva: ISO, 2006.


COMPRESSED GASES - AUTOMATIVE FUELS ISO

ISO/TR 15403-2 2006 Natural gas - Natural gas for use as a compressed fuel for vehicles - P.2:Specification of the quality /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

COMPRESSED GASES - QUALITY ISO

ISO 15403-1 2006 Natural gas - Natural gas for use as a compressed fuel for vehicles - P.1:Designation of the quality /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

CONCENTRATION (CHEMICAL) STANSA

SANS 5560 2005 Pigment volume concentration of paints with a non-aqueous solvent base /ByStandards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2005.

CONCRETES ISO ISO 1920-2 2005 Testing of concrete - P.2: Properties of fresh concrete /By International

Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 1920-3 2004 Testing of concrete - P.3: Making and curing test specimens /By International

Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 1920-5 2004 Testing of concrete - P.5: Properties of hardened concrete other than strength /By

International Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 1920-6 2004 Testing of concrete - P.6: Sampling, preparing and testing of concrete cores /By

International Organization for Standardization (ISO). Geneva: ISO, 2004.

CONSTRUCTION EQUIPMENT BSI BS EN 1991-3 2006 Eurocode 1 - Actions on structures - P.3: Actions induced by cranes and

machinery /By British Standards Institution (BSI). London: BSI, 2006.

COOKING APPLIANCES IEC IEC 60335-2-9 2006 Household and similar electrical appliances - Safety - P.2-9: Particular

requirements for grills, toasters and similar portable cooking appliances /By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2006.


CORROSION PROTECTION STANSA SANS 12944-1 1998 Paints and varnishes - Corrosion protection of steel structures by protective

paint systems - P.1: General introduction /By Standards South Africa (STANSA). Pretoria: STANSA, 1998. SANS 12944-2 1998 Paints and varnishes - Corrosion protection of steel structures by protective

paint systems - P.2: Classification of environments /By Standards South Africa (STANSA). Pretoria:STANSA, 1998.




CRANES BSI BS EN 1991-3 2006 Eurocode 1 - Actions on structures - P.3: Actions induced by cranes and


CURING (CONCRETE) ISO ISO 1920-3 2004 Testing of concrete - P.3: Making and curing test specimens /By International


DANGEROUS MATERIALS DSM MS 1513 P.6 S.P.1 2001 Packaging - Transport of dangerous goods : P.6: Sub Part 1:

Requirements for the construction and testing of packagings for dangerous goods /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2001.


DATA PROCESSING ISO ISO/IEC ISP 12060-1 1995 Information technology - International Standardized Profiles - OSI

Management - Management functions - P.1: AOM211 - General management capabilities /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 1995.

DATA TRANSMISSION ISO ISO/IEC ISP 12060-1 1995 Information technology - International Standardized Profiles - OSI


DENSITY MEASUREMENT STANSA


DIAGRAMS IEC IEC 60617 2006 Graphical symbols for diagrams - Comprising parts 2 to 13 of IEC 60617 /By

International Electrotechnical Commission (IEC). Geneva: IEC, 2006.

DIMENSIONAL COORDINATION DSM MS 1064 P.1 2001 Guide to modular coordination in buildings - P.1: General principles /By

Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

DIMENSIONAL MEASUREMENT STANSA SANS 5369 2005 Dimensions of hosiery /By Standards South Africa (STANSA). 3rd ed. Pretoria:

STANSA, 2005.

DISINFECTANTS AWWA

ANSI/AWWA C651 2005 Disinfecting water mains /By American Water Works Association (AWWA)and American National Standards Institute (ANSI). Denver: AWWA, 2005.


DRIED FOODS DSM MS 1113 1998 Dried crackers (keropok lering) from freshwater and marine fish, crustacea and

molluscan shellfish /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 1998.

DRUM BRAKES STANSA SANS 10256 2005 Brake drum reconditioning /By Standards South Africa (STANSA). Pretoria:

STANSA, 2005.

DRY-TYPE TRANSFORMERS

STANSA


ELECTRIC CABLES

BSI

BS 7889 1997 600/1000 V single-core unarmoured electric cables having thermosetting insulation /ByBritish Standards Institution (BSI). London: BSI, 1997.

ELECTRIC CONDUCTORS

IEC

IEC PAS 61076-3-115 2005 Connectors for electronic equipment - P.3-115: Rectangular connectors- Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHzfor industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.

ELECTRIC CONNECTORS

IEC

IEC PAS 61076-3-114 2005 Connectors for electronic equipment - P.3-114: Rectangular connectors- Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHzfor industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.


IEC PAS 61076-3-116 2005 Connectors for electronic equipment - P.3-116: Rectangular connectors- Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHzfor industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 -Bayonet coupling with spring clamp /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.

SANS 11446 2005 Road vehicles - Connectors for the electrical connection of towing and towedvehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage /By Standards South Africa(STANSA). 3rd ed. Pretoria: STANSA, 2005.

ELECTRIC CONTROL EQUIPMENT STANSA SANS 60730-2-9 2005 Automatic electrical controls for household and similar use - P.2-9: Particular

requirements for temperature sensing controls /By Standards South Africa (STANSA). Pretoria: STANSA, 2005. SANS 61800-5-1 2005 Adjustable speed electrical power drive systems - P.5-1: Safety requirements

- Electrical, thermal and energy /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

ELECTRIC CONVERTORS STANSA SANS 61800-4 2005 Adjustable speed electrical power drive systems - P.4: General requirements -

Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV /ByStandards South Africa (STANSA). Pretoria: STANSA, 2005.

ELECTRIC LAMPS STANSA SANS 20087 2005 Uniform provisions concerning the approval of daytime running lamps for power-

driven vehicles /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

ELECTRIC PLUGS STANSA SANS 11446 2005 Road vehicles - Connectors for the electrical connection of towing and towed

vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage /By Standards South Africa(STANSA). 3rd ed. Pretoria: STANSA, 2005.

ELECTRIC SOCKETS STANSA SANS 11446 2005 Road vehicles - Connectors for the electrical connection of towing and towed

vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage /By Standards South Africa(STANSA). 3rd ed. Pretoria: STANSA, 2005.


ELECTRICAL APPLIANCES IEC IEC 60335-2-9 2006 Household and similar electrical appliances - Safety - P.2-9: Particular


IEC 60335-2-14 2006 Household and similar electrical appliances - Safety - P.2-14: Particularrequirements for kitchen machines /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2006.

IEC 61770 2006 Electric appliances connected to the water mains - Avoidance of backsiphonageand failure of hose-sets /By International Electrotechnical Commission (IEC). Geneva: IEC, 2006.

ELECTRICAL ENGINEERING STANSA

SANS 60479-4 2005 Effects of current on human beings and livestock - P.4: Effects of lightningstrokes on human beings and livestock /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

ELECTRICAL HOUSEHOLD APPLIANCES STANSA


SANS 60335-2-105 2005 Household and similar electrical appliances - Safety - P.2-105: Particularrequirements for multifunctional shower cabinets /By Standards South Africa (STANSA). Pretoria: STANSA,2005.

ELECTRICAL INSULATION IEC

IEC 60071-1 2006 Insulation co-ordination - P.1: Definitions, principles and rules /By InternationalElectrotechnical Commission (IEC). 8th ed. Geneva: IEC, 2006.

ELECTRICAL MEASURING INSTRUMENTS STANSA

SANS 62051-1 2005 Electricity metering - Data exchange for meter reading, tariff and load control -Glossary of terms - P.1: Terms related to data exchange with metering equipment using DLMS/COSEM /ByStandards South Africa (STANSA). Pretoria: STANSA, 2005.


ELECTRICAL SAFETY

ISO

IEC 60335-2-14 2006 Household and similar electrical appliances - Safety - P.2-14: Particularrequirements for kitchen machines /By International Electrotechnical Commission (IEC). 5th ed. Geneva: ISO,2006.

STANSA


ELECTRICAL TRANSMISSION SYSTEMS

STANSA

SANS 61800-4 2005 Adjustable speed electrical power drive systems - P.4: General requirements -Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV /ByStandards South Africa (STANSA). Pretoria: STANSA, 2005.

ELECTRICALLY-OPERATED DEVICES

IEC

IEC 60745-1 2006 Hand-held motor-operated electric tools - Safety - P.1: General requirements /ByInternational Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2006.

IEC 60745-2-1 2003 Hand-held motor-operated electric tools - Safety - P.2-1: Particularrequirements for drills and impact drills /By International Electrotechnical Commission (IEC). 2nd ed. Geneva:IEC, 2003.

IEC 60745-2-2 2003 Hand-held motor-operated electric tools - Safety - P.2-2: Particularrequirements for screwdrivers and impact wrenches /By International Electrotechnical Commission (IEC). 2nd

ed. Geneva: IEC, 2003.

IEC 60745-2-3 2006 Hand-held motor-operated electric tools - Safety - P.2-3: Particularrequirements for grinders, polishers and disk-type sanders /By International Electrotechnical Commission(IEC). 2nd ed. Geneva: IEC, 2006.

STANSA

SANS 62115 2005 Electric toys - Safety /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.


ELECTROMAGNETIC COMPATIBILITY (EMC) IEC IEC 61000-3-2 2005 Electromagnetic compatibility (EMC) - P.3-2: Limits - Limits for harmonic current

emissions (equipment input current ≤16 A per phase) /By International Electrotechnical Commission (IEC).3rd ed. Geneva: IEC, 2005.

IEC 61000-4-6 2003 Electromagnetic compatibility (EMC) - P.4-6: Testing and measurementtechniques - Immunity to conducted disturbances, induced by radio-frequency fields /By InternationalElectrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2006.

IEC 61000-6-4 2006 Electromagnetic compatibility (EMC) - P.6-4: Generic standards - Emissionstandard for industrial environments /By International Electrotechnical Commission (IEC). 2nd ed. Geneva:IEC, 2006.

ELECTRONIC CONNECTORS - FIBRE OPTICS IEC IEC PAS 61076-3-114 2005 Connectors for electronic equipment - P.3-114: Rectangular connectors

- Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHzfor industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.

ELECTRONIC EQUIPMENT AND COMPONENTS IEC QC 080000 2005 IEC Quality Assessment System for Electronic Components (IECQ) - Electrical and

Electronic components and Products Hazardous Substance Process Management System Requirements(HSPM) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2005.

EMERGENCY EQUIPMENT STANSA SANS 60849 2005 Sound systems for emergency purposes /By Standards South Africa (STANSA).

Pretoria: STANSA, 2005.

EMISSION IEC IEC 61000-6-4 2006 Electromagnetic compatibility (EMC) - P.6-4: Generic standards - Emission

standard for industrial environments /By International Electrotechnical Commission (IEC). 2nd ed. Geneva:IEC, 2006.


ESSENTIAL OILS ISO

ISO 3761 2005 Oil of rosewood, Brazilian type [Aniba rosaeodora Ducke or Aniba parviflora (Meisn.)Mez.] /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.

EXPLOSIVE ATMOSPHERES IEC

IEC 60079-11 2006 Explosive atmospheres - P.11: Equipment protection by intrinsic safety "i" /ByInternational Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2006.

FABRIC TESTING STANSA SANS 5412 2005 Degree of blocking of coated textile fabrics /By Standards South Africa (STANSA).

3rd ed. Pretoria: STANSA, 2005. SANS 6116 2004 Resistance of textile fabrics to pilling and fuzzing (Random tumble method) /By

Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.

FIRE DETECTORS ISO ISO 7240-1 2005 Fire detection and alarm systems - P.1: General and definitions /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005. ISO 7240-11 2005 Fire detection and alarm systems - P.11: Manual call points /By International


FIRE EXTINGUISHERS STANSA SANS 11601 2005 Wheeled fire extinguishers - Performance and construction /By Standards South

Africa (STANSA). Pretoria: STANSA, 2005.

FIRE HYDRANTS AWWA ANSI/AWWA C502 2005 Dry-barrel fire hydrants /By American Water Works Association (AWWA)

and American National Standards Institute (ANSI). Denver: AWWA, 2005. ANSI/AWWA C503 2005 Wet-barrel fire hydrants /By American Water Works Association (AWWA)

and American National Standards Institute (ANSI). Denver: AWWA, 2005.


FIRE RESISTANCE DSM MS 544 P.9 S.1 2001 Code of practice for structural use of timber : P.9: Fire resistance of timber

structures : S.1: Method of calculating fire resistance of timber members /By Department of StandardsMalaysia (DSM). Selangor D.E.: DSM, 2001.

FIRE SAFETY STANSA SANS 11601 2005 Wheeled fire extinguishers - Performance and construction /By Standards South


FISH (MEAT)

DSM

MS 898 1998 Dry-salted anchovies (ikan bilis) /By Department of Standards Malaysia (DSM). 2nd

ed. Selangor D.E.: DSM, 1998.

MS 1113 1998 Dried crackers (keropok lering) from freshwater and marine fish, crustacea andmolluscan shellfish /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 1998.

FLANGES AWWA

ANSI/AWWA C600 2005 Installation of ductile-iron water mains and their appurtenances /ByAmerican Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2005.

FLEXIBLE PIPES ISO

ISO 6802 2005 Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulicimpulse test with flexing /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.

FLOW MEASUREMENT ISO

ISO 5168 2005 Measurement of fluid flow - Procedures for the evaluation of uncertainties /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.


FOOD PRODUCTS DSM

MS 1529 2001 The production, processing, labelling and marketing of plant-based organicallyproduced foods /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

FREEZIG POINT STANSA

SANS 5764 2005 Milk - Determination of freezing point - Thermistor cryoscope method (Referencemethod) /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

FROZEN FOODS DSM MS 6 1998 Quick-frozen, raw and cooked shrimps or prawns /By Department of Standards Malaysia

(DSM). 2nd ed. Selangor D.E.: DSM, 1998. MS 898 1998 Dry-salted anchovies (ikan bilis) /By Department of Standards Malaysia (DSM). 2nd

ed. Selangor D.E.: DSM, 1998.

FRUIT JUICES DSM MS 714 2001 Packaged pineapple juice /By Department of Standards Malaysia (DSM). Selangor

D.E.: DSM, 2001.

FUSE-LINKS IEC IEC 60127-1 2006 Miniature fuses - P.1: Definitions for miniature fuses and general requirements for

miniature fuse-links /By International Electrotechnical Commission (IEC). Geneva: IEC, 2006.

FUSES IEC IEC 60127-1 2006 Miniature fuses - P.1: Definitions for miniature fuses and general requirements for

miniature fuse-links /By International Electrotechnical Commission (IEC). Geneva: IEC, 2006.

FUSION WELDING ISO ISO 3834-1 2005 Quality requirements for fusion welding of metallic materials - P.1: Criteria for the

selection of the appropriate level of quality requirements /By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2005.


ISO 3834-2 2005 Quality requirements for fusion welding of metallic materials - P.2: Comprehensivequality requirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO 3834-3 2005 Quality requirements for fusion welding of metallic materials - P.3: Standard qualityrequirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO 3834-4 2005 Quality requirements for fusion welding of metallic matrials - P.4: Elementaryquality requirements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO 3834-5 2005 Quality requirements for fusion welding of metallic materials - P.5: Documents withwhich it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 orISO 3834-4 /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

GATE VALVES AWWA

ANSI/AWWA C500 2002 Metal-seated gate valves for water supply service /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.

ANSI/AWWA C509 2001 Resilient-seated gate valves for water supply service /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2001.

ANSI/AWWA C513 2005 Open-channel, fabricated-metal slide gates and open-channel, fabricated-metal weir gates /By American Water Works Association (AWWA) and American National Standards Institute(ANSI). Denver: AWWA, 2005.

ANSI/AWWA C515 2001 Reduced-wall, resilient-seated gate valves for water supply service /ByAmerican Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2001.

ANSI/AWWA C540 2002 Power-actuating devices for valves and slide gates /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.

ANSI/AWWA C561 2004 Fabricated stainless steel slide gates /By American Water WorksAssociation (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

ANSI/AWWA C563 2004 Fabricated composite slide gates /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

GEAR BOXES STANSA

SANS 10279 2005 The rebuilding of automotive gearboxes /By Standards South Africa (STANSA).Pretoria: STANSA, 2005.


GEAR DRIVES IEC

IEC 62271-111 2005 High voltage switchgear and controlgear - P.111: Overhead, pad-mounted, dryvault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to38 kV /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.

GLYCEROL DSM

MS 1507 2001 Refined palm glycerine /By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2001.

GRAPHIC SYMBOLS IEC

IEC 60617 2006 Graphical symbols for diagrams - Comprising parts 2 to 13 of IEC 60617 /ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2006.

GRINDING MACHINES (TOOLS) IEC

IEC 60745-2-3 2006 Hand-held motor-operated electric tools - Safety - P.2-3: Particularrequirements for grinders, polishers and disk-type sanders /By International Electrotechnical Commission(IEC). 2nd ed. Geneva: IEC, 2006.

HAND-HELD TOOLS IEC IEC 60745-1 2006 Hand-held motor-operated electric tools - Safety - P.1: General requirements /By

International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2006. IEC 60745-2-1 2003 Hand-held motor-operated electric tools - Safety - P.2-1: Particular requirements for

drills and impact drills /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2003. IEC 60745-2-2 2003 Hand-held motor-operated electric tools - Safety - P.2-2: Particular

requirements for screwdrivers and impact wrenches /By International Electrotechnical Commission (IEC). 2nd

ed. Geneva: IEC, 2003. IEC 60745-2-3 2006 Hand-held motor-operated electric tools - Safety - P.2-3: Particular

requirements for grinders, polishers and disk-type sanders /By International Electrotechnical Commission(IEC). 2nd ed. Geneva: IEC, 2006.


HARDNESS TESTING ISO

ISO 4545-1 2005 Metallic materials - Knoop hardness test - P.1: Test method /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

ISO 4545-2 2005 Metallic materials - Knoop hardness test - P.2: Verification and calibration oftesting machines /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 4545-4 2005 Metallic materials - Knoop hardness test - P.4: Table of hardness values /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.

HEALTH AND SAFETY REQUIREMENTS STANSA

SANS 10238 2005 Welding and thermal cutting processes - Health and safety /By Standards SouthAfrica (STANSA). Pretoria: STANSA, 2005.

HELMETS (PROTECTIVE) DSM

MS 183 2001 Industrial safety helmet /By Department of Standards Malaysia (DSM). Selangor D.E.:DSM, 2001.

HIGH-VOLTAGE TESTS IEC

IEC 60060-3 2006 High-voltage test techniques - P.3: Definitions and requirements for on-site testing/By International Electrotechnical Commission (IEC). Geneva: IEC, 2006.

HOSIERY STANSA


HOT-DIP COATIG ISO ISO 4998 2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality /By



ISO 4999 2005 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet ofcommercial, drawing and structural qualities /By International Organization for Standardization (ISO). 4th ed.Geneva: ISO, 2005.

HOUSEHOLD ELECTRICAL APPLIANCES IEC IEC 60335-2-4 2006 Household and similar electrical appliances - Safety - P.2-4: Particular

requirements for spin extractors /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2006.

IEC 60335-2-59 2006 Household and similar electrical appliances - Safety - P.2-59: Particularrequirements for insect killers /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2006.

IEC 60335-2-7 2006 Household and similar electrical appliances - Safety - P.2-7: Particularrequirements for washing machines /By International Electrotechnical Commission (IEC). 6th ed. Geneva:IEC, 2006.

HUMIDIFIERS STANSA


HYDRAULIC TRANSMISSION SYSTEMS ISO

ISO 3601-3 2005 Fluid power systems - O-rings - P.3: Quality acceptance criteria /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

IDENTITY CARDS ISO

ISO/IEC 7501-3 2005 Identification cards - Machine readable travel documents - P.3: Machinereadable official travel documents /By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2005.

STANSA

SANS 7816-1 1998 Identification cards - Integrated circuit (s) cards with contacts - P.1: Physicalcharacteristics /By Standards South Africa (STANSA). Pretoria: STANSA, 1998.


SANS 7816-2 1999 Identification cards - Integrated circuit cards - P.2: Cards with contacts -Dimensions and location of the contacts /By Standards South Africa (STANSA). Pretoria: STANSA, 1999.

SANS 7816-3 1997 Information technology - Identification cards - Integrated circuit(s) cards withcontacts - P.3: Electronic signals and transmission protocols /By Standards South Africa (STANSA). Pretoria:STANSA, 1997.

SANS 7816-6 2005 Identification cards - Integrated circuit cards - P.6: Interindustry data elementsfor interchange /By Standards South Africa (STANSA). 2nd ed. - - Pretoria: STANSA, 2005.


IMPLANTS (SURGICAL) ISO ISO 5832-5 2005 Implants for surgery - Metallic materials - P.5: Wrought cobalt-chromium-tungsten-


INFORMATION EXCHANGE

ISO ISO/IEC ISP 12060-1 1995 Information technology - International Standardized Profiles - OSI


STANSA SANS 7816-6 2005 Identification cards - Integrated circuit cards - P.6: Interindustry data elements

for interchange /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.

INFORMATION TECHNOLOGY

STANSA SANS 7816-3 1997 Information technology - Identification cards - Integrated circuit(s) cards with

contacts - P.3: Electronic signals and transmission protocols /By Standards South Africa (STANSA). Pretoria:STANSA, 1997.

SANS 7816-6 2005 Identification cards - Integrated circuit cards - P.6: Interindustry data elementsfor interchange /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.



INSECTS IEC IEC 60335-2-59 2006 Household and similar electrical appliances - Safety - P.2-59: Particular

requirements for insect killers /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2006.

INSULATING OILS STANSA

NRS 079-1 2004 Mineral insulating oils (Uninhibited) - P.1: Purchase, management, maintenanceand testing /By The Technology Standardization Department (TSD). Pretoria: STANSA, 2004.

INTERNAL COMBUSTION ENGINES ISO

ISO 6621-5 2005 Internal combustion engines - Piston rings - P.5: Quality requirements /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

STANSA

SANS 10278 2005 The remanufacture of petrol engines /By Standards South Africa (STANSA).Pretoria: STANSA, 2005.

IRON DSM

MS 1493 2000 Direct reduced iron (DRI) /By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2000.

JOINTS AWWA

ANSI/AWWA C606 2004 Grooved and shouldered joints /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

KITCHEN UTENSILS ISO

IEC 60335-2-14 2006 Household and similar electrical appliances - Safety - P.2-14: Particularrequirements for kitchen machines /By International Electrotechnical Commission (IEC). 5th ed. Geneva: ISO,2006.


KNITTED FABRICS STANSA

SANS 6116 2004 Resistance of textile fabrics to pilling and fuzzing (Random tumble method) /ByStandards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.

KNOOP HARDNESS MEASUREMENT ISO ISO 4545-1 2005 Metallic materials - Knoop hardness test - P.1: Test method /By International

Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 4545-2 2005 Metallic materials - Knoop hardness test - P.2: Verification and calibration of

testing machines /By International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 4545-3 2005 Metallic materials - Knoop hardness test - P.3: Calibration of reference blocks /By

International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 4545-4 2005 Metallic materials - Knoop hardness test - P.4: Table of hardness values /By


LABELLING DSM

MS 1529 2001 The production, processing, labelling and marketing of plant-based organicallyproduced foods /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

SAA

AS/NZS 6400 2005 Water efficient products - Rating and labelling /By Standards Australia (SAA).New South Wales: SAA, 2005.

LABORATORIES STANSA

SANS 10378 2004 General requirements for the competence of verification laboratories in terms ofthe Trade Metrology Act /By Standards South Africa (STANSA). Pretoria: STANSA, 2004.

LABORATORY ACCREDITATION STANSA

SANS 10378 2004 General requirements for the competence of verification laboratories in terms ofthe Trade Metrology Act /By Standards South Africa (STANSA). Pretoria: STANSA, 2004.


LABORATORY EQUIPMENT STANSA

SANS 4787 1984 Laboratory glassware - Volumetric glassware - Methods for use and testing ofcapacity /By Standards South Africa (STANSA). Pretoria: STANSA, 1984.

SANS 4788 1980 Laboratory glassware - Graduated measuring cylinders /By Standards South Africa(STANSA). Pretoria: STANSA, 1980.

LABORATORY GLASSWARE STANSA

SANS 4787 1984 Laboratory glassware - Volumetric glassware - Methods for use and testing ofcapacity /By Standards South Africa (STANSA). Pretoria: STANSA, 1984.

SANS 4788 1980 Laboratory glassware - Graduated measuring cylinders /By Standards South Africa(STANSA). Pretoria: STANSA, 1980.

LACES (FOOTWEAR) STANSA


LACQUERS JSA

JIS K 5533 2003 Lacquer sealers /By Japanese Standards Association (JSA). Toyko: JSA, 2003.

LAMINATES DSM

MS 758 2001 Glued laminated timber - Performance requirements and minimum productionrequirements /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

LAMPS STANSA

SANS 20087 2005 Uniform provisions concerning the approval of daytime running lamps for power-driven vehicles /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.


LASERS IEC

IEC 60825-5 2003 Safety of laser products - P.5: Manufacturer /By International ElectrotechnicalCommission (IEC). 2nd ed. Geneva: IEC, 2003.

LATICES DSM

MS 281 P.12 2001 Natural rubber latex concentrate: P.12: Determination of boric acid content /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

MS 281 P.14 2001 Natural rubber latex concentrate: P.14: Determination of nitrogen content /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

ISO

ISO 3899 2005 Rubber - Nitrile latex - Determination of residual acrylonitrile content /By InternationalOrganization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.

LEATHER ISO ISO 4684 2005 Leather - Chemical tests - Determination of volatile matter /By International


LIFTING STANSA SANS 7531 1987 Wire rope slings for general purposes - Characteristics and specifications /By

Standards South Africa (STANSA). Pretoria: STANSA, 1987.

LIFTING EQUIPMENT BSI BS EN 1991-3 2006 Eurocode 1 - Actions on structures - P.3: Actions induced by cranes and


LIGHTNING STANSA SANS 10313 2005 The protection of structures against lighting /By Standards South Africa

(STANSA). 2nd ed. Pretoria: STANSA, 2005.


LIGHTNING PROTECTION STANSA

SANS 10313 2005 The protection of structures against lighting /By Standards South Africa(STANSA). 2nd ed. Pretoria: STANSA, 2005.

LINEAR MEASUREMENT STANSA


LIQUEFIED PETROLEUM GAS DSM

MS 537 2001 Method of test for volatility of liquefied petroleum gases /By Department of StandardsMalaysia (DSM). Selangor D.E.: DSM, 2001.

MS 875 2001 Method of test for sulphur in liquefied petroleum gases (oxy-hydrogen burner or lamp)/By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

LIQUID CHROMATOGRAPHY DSM

MS 817 P.6 2001 Methods of test for palm oil and palm oil products - P.6: Determination oftocopherols and tocotrienols content - Method using high-performance liquid chromatography /By Departmentof Standards Malaysia (DSM). 2nd ed. Selangor D.E.: DSM, 2001.

LOW-TEMPERATURE TESTING ISO

ISO 2921 2005 Rubber, vulcanized - Determination of low-temperature characteristics -Temperature-retraction procedure (TR test) /By International Organization for Standardization (ISO). 4th ed.Geneva: ISO, 2005.

LOW-VOLTAGE INSTALLATIONS IEC

IEC 60364-1 2005 Low-voltage electrical installations - P.1: Fundamental principles, assessment ofgeneral characteristics, definitions /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2005.


MACHINE-READABLE MATERIALS ISO

ISO/IEC 7501-3 2005 Identification cards - Machine readable travel documents - P.3: Machinereadable official travel documents /By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2005.

MACHINE TOOLS ISO

ISO 3089 2005 Machine tools - Test conditions for self-centring, manually-operated chucks with one-piece jaws /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.

MARKS BSI

BS 5499-11 2002 Graphical symbols and signs - Safety signs, including fire safety signs - P.11:Water safety signs /By British Standards Institution (BSI). London: BSI, 2002.

MEAT DSM MS 953 2001 Method of sampling for meat and meat products /By Department of Standards

Malaysia (DSM). Selangor D.E.: DSM, 2001.

MEAT PRODUCTS DSM MS 953 2001 Method of sampling for meat and meat products /By Department of Standards


MECHANICAL PROPERTIES OF MATERIALS ISO ISO 5832-5 2005 Implants for surgery - Metallic materials - P.5: Wrought cobalt-chromium-tungsten-


METAL COATINGS ISO ISO 4998 2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality /By



METALS ISO

ISO 4545-1 2005 Metallic materials - Knoop hardness test - P.1: Test method /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

ISO 4545-2 2005 Metallic materials - Knoop hardness test - P.2: Verification and calibration oftesting machines /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 4545-3 2005 Metallic materials - Knoop hardness test - P.3: Calibration of reference blocks /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 4545-4 2005 Metallic materials - Knoop hardness test - P.4: Table of hardness values /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.

MILK STANSA

SANS 5764 2005 Milk - Determination of freezing point - Thermistor cryoscope method (Referencemethod) /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

SANS 9622 2005 Whole milk - Determination of milkfat, protein and lactose content - Guidance onthe operation of mid-infrared instruments /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

MOSQUITO MATS DSM

MS 1044 P.3 1998 Mosquito vaporizing mats : P.3: Method for the evaluation of biological efficacy -Glass cylinder method /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 1998.

NATURAL GAS DSM MS 1204 2001 Code of practice for CNG compressor refuelling stations : on site storage and


ISO ISO 15403-1 2006 Natural gas - Natural gas for use as a compressed fuel for vehicles - P.1:

Designation of the quality /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO/TR 15403-2 2006 Natural gas - Natural gas for use as a compressed fuel for vehicles - P.2:Specification of the quality /By International Organization for Standardization (ISO). Geneva: ISO, 2006.


NATURAL RUBBER

DSM

MS 281 P.12 2001 Natural rubber latex concentrate: P.12: Determination of boric acid content /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

MS 281 P.14 2001 Natural rubber latex concentrate: P.14: Determination of nitrogen content /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

NICKEL

JSA

JIS H1360 1997 Methods for determination of nickel in aluminium and aluminium alloys /ByJapanese Standards Association (JSA). Tokyo: JSA, 1997.

NICKEL CONTAINING ALLOYS

ISO

ISO 5832-5 2005 Implants for surgery - Metallic materials - P.5: Wrought cobalt-chromium-tungsten-nickel alloy /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.

NON-VOLATILE MATTER DETERMINATION

STANSA


OCCUPATIONAL SAFETY

STANSA


OPEN SYSTEMS INTERCONNECTION ISO ISO/IEC ISP 12060-1 1995 Information technology - International Standardized Profiles - OSI



OPTICAL FIBRES STANSA SANS 60793-2-50 2005 Optical fibres - P.2-50: Product specifications - Sectional specification for

class B single-mode fibres /By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2005.

OPTICAL SCANNERS IEC IEC 62129 2006 Calibration of optical spectrum analyzers /By International Electrotechnical

Commission (IEC). Geneva: IEC, 2006.

OUTLET CONNECTIONS IEC

IEC TR 60083 2006 Plugs and socket-outlets for domestic and similar general use standardized inmember countries of IEC /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2006.

PACKAGING DSM

MS 1513 P.6 S.P.1 2001 Packaging - Transport of dangerous goods : P.6: Sub P.1: Requirementsfor the construction and testing of packagings for dangerous goods /By Department of Standards Malaysia(DSM). Selangor D.E.: DSM, 2001.

PACKAGING - TESTING DSM MS 1513 P.6 S.P.1 2001 Packaging - Transport of dangerous goods : P.6: Sub Part 1:

Requirements for the construction and testing of packagings for dangerous goods /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2001.

PAINTS DSM

MS 133 P. B5 1997 Methods of test for paints and varnishes : P. B5: Determination of 'soluble' leadcontent by flame atomic absorption spectrometric method and dithizone spectrophotometric method /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 1997.

STANSA



PALM KERNEL OIL DSM

MS 817 P.6 2001 Methods of test for palm oil and palm oil products - P.6: Determination oftocopherols and tocotrienols content - Method using high-performance liquid chromatography /By Departmentof Standards Malaysia (DSM). 2nd ed. Selangor D.E.: DSM, 2001.

MS 1507 2001 Refined palm glycerine /By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2001.

PAPER PULP

ISO

ISO 5269-2 2004 Pulps - Preparation of laboratory sheets for physical testing - P.2: Rapid-Kothenmethod /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

PETROL ENGINES

STANSA

SANS 10278 2005 The remanufacture of petrol engines /By Standards South Africa (STANSA).Pretoria: STANSA, 2005.

PETROLEUM PRODUCTS

ISO

ISO 4259 2006 Petroleum products - Determination and application of precision data in relation tomethods of test /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2006.

PIGMENTS

STANSA


PILLING TESTS

STANSA



PINEAPPLES DSM MS 714 2001 Packaged pineapple juice /By Department of Standards Malaysia (DSM). Selangor

D.E.: DSM, 2001.

PIPE FITTINGS

AWWA ANSI/AWWA C605 2005 Underground installation of polyvinyl chloride (PVC) pressure pipe and

fittings for water /By American Water Works Association (AWWA) and American National Standards Institute(ANSI). Denver: AWWA, 2005.

ISO

ISO 1167-1 2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -Determination of the resistance to internal pressure - P.1: General method /By International Organization forStandardization (ISO). Geneva: ISO, 2006.

ISO 1167-2 2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -Determination of the resistance to internal pressure - P.2: Preparation of pipe test pieces /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2006.

PIPELINES

AWWA ANSI/AWWA C602 2006 Cement mortar lining of water pipelines in place - 4 in. (100 mm) and

larger /By American Water Works Association (AWWA) and American National Standards Institute (ANSI).Denver: AWWA, 2006.

ANSI/AWWA C606 2004 Grooved and shouldered joints /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

PIPES ISO ISO 1167-1 2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -

Determination of the resistance to internal pressure - P.1: General method /By International Organization forStandardization (ISO). Geneva: ISO, 2006.

ISO 1167-2 2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -Determination of the resistance to internal pressure - P.2: Preparation of pipe test pieces /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2006.


PIPEWORK SYSTEMS

AWWA


PIPING AWWA


PISTON RINGS ISO

ISO 6621-5 2005 Internal combustion engines - Piston rings - P.5: Quality requirements /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

PLASTICS ISO ISO 483 2005 Plastics - Small enclosures for conditioning and testing using aqueous solutions to

maintain the humidity at a constant value /By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2005.

ISO 4892-2 2006 Plastics - Methods of exposure to laboratory light sources - P.2: Xenon-arc lamps/By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

PLASTICS AND RUBBER TECHNOLOGY ISO ISO 3899 2005 Rubber - Nitrile latex - Determination of residual acrylonitrile content /By International

Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.

PLUG VALVES AWWA

ANSI/AWWA C517 2005 Resilient-seated cast-iron eccentric plug valves /By American Water WorksAssociation (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.


PLYWOOD

DSM MS 544 P.4 S.1 2001 Code of practice for structural use of timber - P.4: Timber panel products :

S.1: Structural plywood /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

MS 544 P.4 S.2 2001 Code of practice for structural use of timber - P.4: Timber panel products :S.2: Marine plywood /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

POROUS MATERIALS

DSM MS 1493 2000 Direct reduced iron (DRI) /By Department of Standards Malaysia (DSM). Selangor

D.E.: DSM, 2000.

POTENTIOMETRIC METHODS

ISO ISO 5943 2006 Cheese and processed cheese products - Determination of chloride content -

Potentiometric titration method /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006.

PRESERVATION

STANSA

SANS 10385-1 2005 Requirements for the implementation of an identity preservation system (IPsystem) - P.1: IP system for the production, storage, handling and transportation of non-genetically modifiedunprocessed agricultural products /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

PRESSURE EQUIPMENT

ISO ISO 4991 2005 Steel castings for pressure purposes /By International Organization for

Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

PRESSURE PIPES AWWA ANSI/AWWA C603 2005 Installation of asbestos - Cement pressure pipe /By American Water Works

Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.


ANSI/AWWA C605 2005 Underground installation of polyvinyl chloride (PVC) pressure pipe andfittings for water /By American Water Works Association (AWWA) and American National Standards Institute(ANSI). Denver: AWWA, 2005.

PRESSURE VESSELS SAA AS 1271 2003 Safety valves, other valves, liquid level gauges and other fittings for boilers and

unfired pressure vessels /By Standards Australia (SAA). New South Wales: SAA, 2003.

PROCESSED FOODS DSM MS 6 1998 Quick-frozen, raw and cooked shrimps or prawns /By Department of Standards Malaysia

(DSM). 2nd ed. Selangor D.E.: DSM, 1998. MS 898 1998 Dry-salted anchovies (ikan bilis) /By Department of Standards Malaysia (DSM). 2nd ed.

Selangor D.E.: DSM, 1998.

PROTECTIVE COATINGS AWWA

ANSI/AWWA C550 2005 Protective interior coatings for valves and hydrants /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

STANSA

SANS 12944-1 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.1: General introduction /By Standards South Africa (STANSA). Pretoria: STANSA, 1998.

SANS 12944-2 1998 Paints and varnishes - Corrosion protection of steel structures by protectivepaint systems - P.2: Classification of environments /By Standards South Africa (STANSA). Pretoria:STANSA, 1998.





QUALITY ASSURANCE IEC

QC 080000 2005 IEC Quality Assessment System for Electronic Components (IECQ) - Electrical andElectronic components and Products Hazardous Substance Process Management System Requirements(HSPM) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2005.

ISO ISO 3834-1 2005 Quality requirements for fusion welding of metallic materials - P.1: Criteria for the





ISO 3834-5 2005 Quality requirements for fusion welding of metallic materials - P.5: Documents withwhich it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 orISO 3834-4 /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

QUANTITATIVE ANALYSIS ISO ISO 1833-1 2006 Textiles - Quantitative chemical analysis - P.1: General principles of testing /By

International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-2 2006 Textiles - Quantitative chemical analysis - P.2: Ternary fibre mixtures /By

International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-3 2006 Textiles - Quantitative chemical analysis - P.3: Mixtures of acetate and certain

other fibres (method using acetone) /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-4 2006 Textiles - Quantitative chemical analysis - P.4: Mixtures of certain protein and

certain other fibres (method using hypochlorite) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.

ISO 1833-5 2006 Textiles - Quantitative chemical analysis - P.5: Mixtures of viscose, cupro or modaland cotton fibres (method using sodium zincate) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.


ISO 1833-7 2006 Textiles - Quantitative chemical analysis - P.7: Mixtures of polyamide and certainother fibres (method using formic acid) /By International Organization for Standardization (ISO). Geneva:ISO, 2006.

ISO 1833-8 2006 Textiles - Quantitative chemical analysis - P.8: Mixtures of acetate and triacetatefibres (method using acetone) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 1833-9 2006 Textiles - Quantitative chemical analysis - P.9: Mixtures of acetate and triacetatefibres (method using benzyl alcohol) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 1833-10 2006 Textiles - Quantitative chemical analysis - P.10: Mixtures of triacetate orpolylactide and certain other fibres (method using dichloromethane) /By International Organization forStandardization (ISO). Geneva: ISO, 2006.

ISO 1833-11 2006 Textiles - Quantitative chemical analysis - P.11: Mixtures of cellulose andpolyester fibres (method using sulfuric acid) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.

ISO 1833-12 2006 Textiles - Quantitative chemical analysis - P.12: Mixtures of acrylic, certainmodacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide)/By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 1833-13 2006 Textiles - Quantitative chemical analysis - P.13: Mixtures of certain chlorofibresand certain other fibres (method using carbon disulfide/acetone) /By International Organization forStandardization (ISO). Geneva: ISO, 2006.

ISO 1833-14 2006 Textiles - Quantitative chemical analysis - P.14: Mixtures of acetate and certainchlorofibres (method using acetic acid) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 1833-15 2006 Textiles - Quantitative chemical analysis - P.15: Mixtures of jute and certainanimal fibres (method by determining nitrogen content) /By International Organization for Standardization(ISO). Geneva: ISO, 2006.

ISO 1833-16 2006 Textiles - Quantitative chemical analysis - P.16: Mixtures of polypropylene fibresand certain other fibres (method using xylene) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.

ISO 1833-17 2006 Textiles - Quantitative chemical analysis - P.17: Mixtures of chlorofibres(homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2006.

ISO 1833-18 2006 Textiles - Quantitative chemical analysis - P.18: Mixtures of silk and wool or hair(method using sulfuric acid) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.


ISO 1833-19 2006 Textiles - Quantitative chemical analysis - P.19: Mixtures of cellulose fibres andasbestos (method by heating) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 1833-21 2006 Textiles - Quantitative chemical analysis - P.21: Mixtures of chlorofibres, certainmodacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone)/By International Organization for Standardization (ISO). Geneva: ISO, 2006.

RADIO DISTURBANCES IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment - Radio

disturbance characteristics - Limits and methods of measurement /By International ElectrotechnicalCommission (IEC). 4th ed. Geneva: IEC, 2006.

RECEIVERS IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment - Radio


RECEIVERS - MEASUREMENT IEC IEC 107-6 1989 Recommended methods of measurement on receivers for television broadcast

transmissions - P.6: Measurement under conditions different from broadcast signal standards /ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 1989.

REFRACTORY MATERIALS ISO ISO 5019-6 2005 Refractory bricks - Dimensions - P.6: Basic bricks for oxygen steel-making

converters /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

REFUELLING STATIONS DSM MS 1204 2001 Code of practice for CNG compressor refuelling stations : on site storage and


REINFORCING MATERIALS STANSA SANS 9933 1995 Products in fibre reinforced cement - Long corrugated or asymmetrical section

sheets and fittings for roofing and cladding /By Standards South Africa (STANSA). Pretoria: STANSA, 1995.


RELISHES (FOOD) DSM

MS 531 2001 Tomato sauce (ketchup) /By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2001.

ROAD VEHICLES STANSA

SANS 11446 2005 Road vehicles - Connectors for the electrical connection of towing and towedvehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage /By Standards South Africa(STANSA). 3rd ed. Pretoria: STANSA, 2005.

ROOM HUMIDIFIERS STANSA


RUBBER ISO ISO 15113 2005 Rubber - Determination of frictional properties /By International Organization for

Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

SAFETY MEASURES IEC

IEC 60065 2005 Audio, video and similar electronic apparatus - Safety requirements /By InternationalElectrotechnical Commission (IEC). 7th ed. Geneva: IEC, 2005.

STANSA SANS 10238 2005 Welding and thermal cutting processes - Health and safety /By Standards South

Africa (STANSA). Pretoria: STANSA, 2005. SANS 60335-2-105 2005 Household and similar electrical appliances - Safety - P.2-105: Particular

requirements for multifunctional shower cabinets /By Standards South Africa (STANSA). Pretoria: STANSA, 2005. SANS 61800-5-1 2005 Adjustable speed electrical power drive systems - P.5-1: Safety requirements

- Electrical, thermal and energy /By Standards South Africa (STANSA). Pretoria: STANSA, 2005. SANS 62115 2005 Electric toys - Safety /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.


SAMPLING METHODS DSM

MS 953 2001 Method of sampling for meat and meat products /By Department of StandardsMalaysia (DSM). Selangor D.E.: DSM, 2001.

SANITARY APPLIANCES DSM

MS 1522 2001 Vitreous china water closet pans /By Department of Standards Malaysia (DSM).Selangor D.E.: DSM, 2001.

SAVOURY SAUCES DSM MS 531 2001 Tomato sauce (ketchup) /By Department of Standards Malaysia (DSM). Selangor

D.E.: DSM, 2001.

SCOURING POWDER DSM MS 253 2001 Scouring powder /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

SEALERS JSA JIS K 5533 2003 Lacquer sealers /By Japanese Standards Association (JSA). Toyko: JSA, 2003.

SECTIONS (STRUCTURES) DSM MS 1495 2000 Blooms for hot rolled non-alloyed structural steel sections /By Department of

Standards Malaysia (DSM). Selangor D.E.: DSM, 2000.

MS 1496 2000 Beam blanks for hot rolled non-alloyed structural steel sections /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2000.

SHEET MATERIALS ISO

ISO 4998 2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality /ByInternational Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2005.


SHELL FISH DSM MS 1113 1998 Dried crackers (keropok lering) from freshwater and marine fish, crustacea and

molluscan shellfish /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 1998.

SHIELDING (ELECTRICITY) IEC IEC PAS 61076-3-115 2005 Connectors for electronic equipment - P.3-115: Rectangular connectors

- Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHzfor industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.

SHOWER BATHS STANSA SANS 60335-2-105 2005 Household and similar electrical appliances - Safety - P.2-105: Particular

requirements for multifunctional shower cabinets /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

SHRIMPS DSM MS 6 1998 Quick-frozen, raw and cooked shrimps or prawns /By Department of Standards Malaysia

(DSM). 2nd ed. Selangor D.E.: DSM, 1998. MS 898 1998 Dry-salted anchovies (ikan bilis) /By Department of Standards Malaysia (DSM). 2nd ed.


SIGNAL DEVICES BSI BS 5499-11 2002 Graphical symbols and signs - Safety signs, including fire safety signs - P.11:

Water safety signs /By British Standards Institution (BSI). London: BSI, 2002.

SILICON JSA JIS H1352 1997 Methods for determination of silicon in aluminium and aluminium alloys /By

Japanese Standards Association (JSA). Tokyo: JSA, 1997.

SOCKETS IEC IEC TR 60083 2006 Plugs and socket-outlets for domestic and similar general use standardized in

member countries of IEC /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2006.


SOUND BROADCASTING IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment - Radio


SOUND GENERATORS STANSA SANS 60849 2005 Sound systems for emergency purposes /By Standards South Africa (STANSA).


STEELS DSM MS 1494 2000 Billets for hot rolled non-alloyed steel bars and rods /By Department of Standards


STORAGE BATTERIES STANSA SANS 61960 2005 Secondary cells and batteries containing alkaline or other non-acid electrolytes -

Secondary lithium cells and batteries for portable applications /By Standards South Africa (STANSA).Pretoria: STANSA, 2005.

STRUCTURAL DESIGN BSI BS EN 1991-3 2006 Eurocode 1 - Actions on structures - P.3: Actions induced by cranes and


STRUCTURAL STEELS DSM MS 1495 2000 Blooms for hot rolled non-alloyed structural steel sections /By Department of

Standards Malaysia (DSM). Selangor D.E.: DSM, 2000. MS 1496 2000 Beam blanks for hot rolled non-alloyed structural steel sections /By Department of

Standards Malaysia (DSM). Selangor D.E.: DSM, 2000.

ISO ISO 4998 2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality /By



STRUCTURAL TIMBER DSM MS 544 P.1 2001 Code of practice for structural use of timber : P.1: General /By Department of

Standards Malaysia (DSM). Selangor D.E.: DSM, 2001. MS 544 P.2 2001 Code of practice for structural use of timber : P.2: Permissible stress design of

solid timber /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001. MS 544 P.3 2001 Code of practice for structural use of timber : P.3: Permissible stress design of

glued laminated timber /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001. MS 544 P.4 S.1 2001 Code of practice for structural use of timber - P.4: Timber panel products :

S.1: Structural plywood /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001. MS 544 P.4 S.2 2001 Code of practice for structural use of timber - P.4: Timber panel products :

S.2: Marine plywood /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001. MS 544 P.4 S.3 2001 Code of practice for structural use of timber - P.4: Timber panel products :

S.3: Cement bonded particleboard (CBP) /By Department of Standards Malaysia (DSM). Selangor D.E.:DSM, 2001.

MS 544 P.4 S.4 2001 Code of practice for structural use of timber - P.4: Timber panel products :S.4: Oriented Strand Board (OSB) /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

MS 544 P.5 2001 Code of practice for structural use of timber: P.5: Timber joints /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2001.

MS 544 P.6 2001 Code of practice for structural use of timber: P.6: Workmanship, inspection andmaintenance /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

MS 544 P.7 2001 Code of practice for structural use of timber: P.7: Testing /By Department ofStandards Malaysia (DSM). Selangor D.E.: DSM, 2001.

MS 544 P.9 S.1 2001 Code of practice for structural use of timber : P.9: Fire resistance of timberstructures : S.1: Method of calculating fire resistance of timber members /By Department of StandardsMalaysia (DSM). Selangor D.E.: DSM, 2001.

MS 544 P.11 S.1 2001 Code of practice for structural use of timber - P.11: Recommended spantables and their calculations : S.1: Domestic floor joists /By Department of Standards Malaysia (DSM).Geneva: DSM, 2001.

MS 544 P.11 S.2 2001 Code of practice for structural use of timber: P.11: Recommended spantables and their calculations: S.2: Ceiling joists /By Department of Standards Malaysia (DSM). Selangor D.E.:DSM, 2001.


MS 544 P.11 S.3 2001 Code of practice for structural use of timber: P.11: Recommended spantables and their calculations: S.3: Ceiling binders /By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2001.

STRUCTURES BSI

BS EN 1991-3 2006 Eurocode 1 - Actions on structures - P.3: Actions induced by cranes andmachinery /By British Standards Institution (BSI). London: BSI, 2006.

SURFACE TREATMENT STANSA

SANS 10064 2005 The preparation of steel surfaces for coating /By Standards South Africa(STANSA). 3rd ed. Pretoria: STANSA, 2005.

SWITCHGEAR IEC IEC 62271-111 2005 High voltage switchgear and controlgear - P.111: Overhead, pad-mounted, dry

vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to38 kV /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.

SWITCHGEAR HIGH VOLTAGE IEC

IEC 62271-111 2005 High voltage switchgear and controlgear - P.111: Overhead, pad-mounted, dryvault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to38 kV /By International Electrotechnical Commission (IEC). Geneva: IEC, 2005.

TELEVISION BROADCASTING IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment - Radio


IEC 107-6 1989 Recommended methods of measurement on receivers for television broadcasttransmissions - P.6: Measurement under conditions different from broadcast signal standards /ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 1989.


TELEVISION RECEIVERS IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment - Radio


IEC 107-6 1989 Recommended methods of measurement on receivers for television broadcasttransmissions - P.6: Measurement under conditions different from broadcast signal standards /ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 1989.

TEMPERATURE CONTROL STANSA

SANS 60730-2-9 2005 Automatic electrical controls for household and similar use - P.2-9: Particularrequirements for temperature sensing controls /By Standards South Africa (STANSA). Pretoria: STANSA,2005.

TEST EQUIPMENT ISO ISO 483 2005 Plastics - Small enclosures for conditioning and testing using aqueous solutions to

maintain the humidity at a constant value /By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2005.

TESTING BSI BS EN 196-1 2005 Methods of testing cement - P.1: Determination of strength /By British Standards

Institution (BSI). London: BSI, 2005. BS EN 196-3 2005 Methods of testing cement - P.3: Determination of setting times and soundness

/By British Standards Institution (BSI). London: BSI, 2005. ISO 1920-5 2004 Testing of concrete - P.5: Properties of hardened concrete other than strength /By

International Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 1920-6 2004 Testing of concrete - P.6: Sampling, preparing and testing of concrete cores /By


TESTING CONDITIONS ISO ISO 3089 2005 Machine tools - Test conditions for self-centring, manually-operated chucks with one-

piece jaws /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.


TEXTILE FIBRES

ISO ISO 1833-1 2006 Textiles - Quantitative chemical analysis - P.1: General principles of testing /By



other fibres (method using acetone) /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-4 2006 Textiles - Quantitative chemical analysis - P.4: Mixtures of certain protein and

certain other fibres (method using hypochlorite) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.

ISO 1833-5 2006 Textiles - Quantitative chemical analysis - P.5: Mixtures of viscose, cupro or modaland cotton fibres (method using sodium zincate) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.

ISO 1833-7 2006 Textiles - Quantitative chemical analysis - P.7: Mixtures of polyamide and certainother fibres (method using formic acid) /By International Organization for Standardization (ISO). Geneva:ISO, 2006.








ISO 1833-14 2006 Textiles - Quantitative chemical analysis - P.14: Mixtures of acetate and certainchlorofibres (method using acetic acid) /By International Organization for Standardization (ISO). Geneva:ISO, 2006.







TEXTILE MACHINERY AND ACCESSORIES ISO

ISO 5234 2005 Textile machinery and accessories - Metallic card clothing - Definitions ofdimensions, types and mounting /By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2005.

TEXTILE TESTING ISO

ISO 1833-4 2006 Textiles - Quantitative chemical analysis - P.4: Mixtures of certain protein andcertain other fibres (method using hypochlorite) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.

STANSA SANS 5316 2005 Abrasion resistance of textile shoe laces (without core) and similar articles /By

Standards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2005.




TEXTILES ISO ISO 105-C10 2006 Textiles - Tests for colour fastness - P.C10: Colour fastness to washing with

soap or soap and soda /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 105-E05 2006 Textiles - Tests for colour fastness - P.E05: Colour fastness to spotting: Acid /By

International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006. ISO 105-E06 2006 Textiles - Test for colour fasness - P.E06: Colour fastness to spotting: Alkali /By

International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2006. ISO 1833-1 2006 Textiles - Quantitative chemical analysis - P.1: General principles of testing /By



other fibres (method using acetone) /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 1833-5 2006 Textiles - Quantitative chemical analysis - P.5: Mixtures of viscose, cupro or modal

and cotton fibres (method using sodium zincate) /By International Organization for Standardization (ISO).Geneva: ISO, 2006.

ISO 1833-7 2006 Textiles - Quantitative chemical analysis - P.7: Mixtures of polyamide and certainother fibres (method using formic acid) /By International Organization for Standardization (ISO). Geneva: ISO, 2006.








ISO 1833-14 2006 Textiles - Quantitative chemical analysis - P.14: Mixtures of acetate and certainchlorofibres (method using acetic acid) /By International Organization for Standardization (ISO). Geneva:ISO, 2006.







STANSA



THERMAL CUTTING STANSA


THERMISTORS IEC IEC 60738-1 2006 Thermistors - Directly heated positive temperature coefficient - P.1: Generic

specification /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2006.

STANSA SANS 5764 2005 Milk - Determination of freezing point - Thermistor cryoscope method (Reference

method) /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

TIN ALLOYS JSA JIS H1361 1997 Methods for determination of tin in aluminium and aluminium alloys /By Japanese

Standards Association (JSA). Tokyo: JSA, 1997.

TOASTERS IEC IEC 60335-2-9 2006 Household and similar electrical appliances - Safety - P.2-9: Particular


TOMATOES DSM

MS 531 2001 Tomato sauce (ketchup) /By Department of Standards Malaysia (DSM). SelangorD.E.: DSM, 2001.

TOROIDAL SEALING RINGS ISO

ISO 3601-3 2005 Fluid power systems - O-rings - P.3: Quality acceptance criteria /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.


TOYS STANSA

SANS 62115 2005 Electric toys - Safety /By Standards South Africa (STANSA). Pretoria: STANSA,2005.

TRANSFORMERS STANSA


UNALLOYED STEELS ISO

ISO 4998 2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality /ByInternational Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2005.

ISO 4999 2005 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet ofcommercial, drawing and structural qualities /By International Organization for Standardization (ISO). 4th ed.Geneva: ISO, 2005.

VACUUM DEVICES AWWA


VALVES AWWA

ANSI/AWWA C508 2001 Swing-check valves for waterworks service, 2-In. through 24-In. (50-mmthrough 600-mm) NPS /By American Water Works Association (AWWA) and American National StandardsInstitute (ANSI). Denver: AWWA, 2001.

ANSI/AWWA C517 2005 Resilient-seated cast-iron eccentric plug valves /By American Water WorksAssociation (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA C540 2002 Power-actuating devices for valves and slide gates /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.


ANSI/AWWA C550 2005 Protective interior coatings for valves and hydrants /By American WaterWorks Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

SAA AS 1271 2003 Safety valves, other valves, liquid level gauges and other fittings for boilers and

unfired pressure vessels /By Standards Australia (SAA). New South Wales: SAA, 2003.

VALVES FOR WATER SUPPLY IN BUILDINGS AWWA ANSI/AWWA C515 2001 Reduced-wall, resilient-seated gate valves for water supply service /By

American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2001.

VARNISHES DSM MS 133 P. B5 1997 Methods of test for paints and varnishes : P. B5: Determination of 'soluble' lead

content by flame atomic absorption spectrometric method and dithizone spectrophotometric method /ByDepartment of Standards Malaysia (DSM). Selangor D.E.: DSM, 1997.

VEHICLE LIGHTS STANSA SANS 20087 2005 Uniform provisions concerning the approval of daytime running lamps for power-

driven vehicles /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

VEHICLES STANSA SANS 10279 2005 The rebuilding of automotive gearboxes /By Standards South Africa (STANSA).


VIDEO SIGNALS IEC IEC 60065 2005 Audio, video and similar electronic apparatus - Safety requirements /By

International Electrotechnical Commission (IEC). 7th ed. Geneva: IEC, 2005.

VITRIFIED CHINA DSM MS 1522 2001 Vitreous china water closet pans /By Department of Standards Malaysia (DSM).



VOCABULARY ISO ISO 3509 2005 Coffee and coffee products - Vocabulary /By International Organization for

Standardization (ISO). 4th ed. Geneva: ISO, 2005. ISO 5234 2005 Textile machinery and accessories - Metallic card clothing - Definitions of dimensions,

types and mounting /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

STANSA SANS 62051-1 2005 Electricity metering - Data exchange for meter reading, tariff and load control -

Glossary of terms - P.1: Terms related to data exchange with metering equipment using DLMS/COSEM /ByStandards South Africa (STANSA). Pretoria: STANSA, 2005.

VOLUME MEASUREMENT STANSA SANS 4787 1984 Laboratory glassware - Volumetric glassware - Methods for use and testing of

capacity /By Standards South Africa (STANSA). Pretoria: STANSA, 1984.

VULCANIZED RUBBER ISO ISO 2921 2005 Rubber, vulcanized - Determination of low-temperature characteristics -

Temperature-retraction procedure (TR test) /By International Organization for Standardization (ISO). 4th ed.Geneva: ISO, 2005.

WARNING DEVICES STANSA SANS 60849 2005 Sound systems for emergency purposes /By Standards South Africa (STANSA).


WASHING MACHINES IEC IEC 60335-2-7 2006 Household and similar electrical appliances - Safety - P.2-7: Particular requirements

for washing machines /By International Electrotechnical Commission (IEC). 6th ed. Geneva: IEC, 2006.

WATER SAA AS/NZS 6400 2005 Water efficient products - Rating and labelling /By Standards Australia (SAA).

New South Wales: SAA, 2005.


WATER PURIFICATION STANSA SANS 10298 2005 Indirect small to medium-sized gas chlorination systems for the disinfection of

water /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

WATER TREATMENT STANSA SANS 10298 2005 Indirect small to medium-sized gas chlorination systems for the disinfection of

water /By Standards South Africa (STANSA). Pretoria: STANSA, 2005.

WATERWORKS

AWWA ANSI/AWWA C500 2002 Metal-seated gate valves for water supply service /By American Water

Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.

ANSI/AWWA C511 1997 Reduced-pressure principle backflow prevention assembly /By AmericanWater Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 1997.

ANSI/AWWA C651 2005 Disinfecting water mains /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2005.

WEAR RESISTANCE STANSA


WELDING ISO ISO 3834-1 2005 Quality requirements for fusion welding of metallic materials - P.1: Criteria for the






STANSA SANS 10238 2005 Welding and thermal cutting processes - Health and safety /By Standards South


WIRE ROPES STANSA SANS 7531 1987 Wire rope slings for general purposes - Characteristics and specifications /By

Standards South Africa (STANSA). Pretoria: STANSA, 1987.

WOOD DSM MS 758 2001 Glued laminated timber - Performance requirements and minimum production

requirements /By Department of Standards Malaysia (DSM). Selangor D.E.: DSM, 2001.

STANSA SANS 10005 2005 The preservative treatment of timber /By Standards South Africa (STANSA).

7th ed. Pretoria: STANSA, 2005.


มาตรฐานไทย

กระดก - การรกษา

มอก. 1684 2541 วสดทใสในรางกายทางศลยกรรม - แนวทางเพอการดแลและจดการวสดทใสในรางกายทางศลยกรรมกระดก

การฆาเชอ มอก. 2278 2549 การฆาเชอเครองมอแพทย - ขอมลทผผลตตองจดหาส าหรบกระบวนการฆาเชอซ าเครอง

มอแพทย

มอก. 2279 ล.3 2549 การฆาเชอเครองมอแพทย - วธการทางจลชววทยา เลม 3 ขอแนะน าในการประเมนและแปลผลประชากรจลนทรยในผลตภณฑและในบรรจภณฑ

การรบกวนคลนวทย มอก. 1441 ล. 4 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-4

อปกรณวดสญญาณรบกวนวทยและภมคมกน - บรภณฑชวย - สญญาณรบกวนทแผออก

มอก. 1441 ล. 5 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-5อปกรณวดสญญาณรบกวนวทยและภมคมกน - สถานททดสอบสอบเทยบสายอากาศส าหรบ 30 เมกะเฮรตซ ถง1 000 เมกะเฮรตซ

มอก. 1441 ล.1 2548 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-1อปกรณวดสญญาณรบกวนวทยและภมคมกน - อปกรณวด

มอก. 1441 ล.3 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-3อปกรณวดสญญาณรบกวนวทยและภมคมกน - บรภณฑชวย - ก าลงไฟฟารบกวน

มอก. 2092 ล. 2 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2-2วธการวดของสญญาณรบกวนและภมคมกน - การวดก าลงไฟฟารบกวน

มอก. 2092 ล. 3 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2- 3วธการวดของสญญาณรบกวนและภมคมกน - การวดสญญาณรบกวนทแผออก

มอก. 2092 ล. 4 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 2-4วธการวดของสญญาณรบกวนและภมคมกน - การวดภมคมกน

การรบกวนทางแมเหลกไฟฟา มอก. 1441 ล. 4 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-4









คลนแมเหลกไฟฟา มอก. 1441 ล. 4 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-4









คลนวทย มอก. 1441 ล. 4 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-4

อปกรณวดสญญาณรบกวนวทยและภมคมกน - บรภณฑชวย - สญญาณรบกวนทแผออก มอก. 1441 ล. 5 2549 ขอก าหนดส าหรบอปกรณและวธการวดสญญาณรบกวนวทยและภมคมกน เลม 1-5

อปกรณวดสญญาณรบกวนวทยและภมคมกน - สถานททดสอบสอบเทยบสายอากาศส าหรบ 30 เมกะเฮรตซ ถง1 000 เมกะเฮรตซ






เครองเขยน มอก. 2275 2549 สพาสเทลน ามน

เครองแตงกาย มอก. 2261 2549 เสอชนในชาย มอก. 2262 2549 กางเกงชนในชาย

เครองมอและอปกรณส านกงาน มอก. 2275 2549 สพาสเทลน ามน

เครองส าอาง มอก. 45 2549 ยาสฟน

โคมไฟ - ยานยนต มอก. 2282 2549 โคมไฟเลยวยานยนตและสวนพวง

มอก. 2283 2549 โคมไฟแสดงต าแหนงดานหนาและดานทาย โคมไฟหยด และโคมไฟแสดงเคาโครงตวรถของยานยนตและสวนพวง


โคมไฟ - รถยนต มอก. 2282 2549 โคมไฟเลยวยานยนตและสวนพวง


ฉนวนกนความรอน มอก. 1384 2548 ฉนวนกนความรอนพอลเอทลนโฟม

ชดใหสารละลาย มอก. 2159 2547 ชดใหสารละลายทางหลอดเลอดแบบบวเรตต

ถงน า มอก. 435 2548 ถงเกบน าพลาสตกเสรมใยแกว

ถานกมมนต มอก. 900 2547 ถานกมมนต

ทนตอนามย มอก. 42 2548 แปรงสฟน

มอก. 45 2549 ยาสฟน

น าดม มอก. 257 2549 น าบรโภค

บรรจภณฑ มอก. 2182 2547 ถวยแกวตวงยา


มอก. 435 2548 ถงเกบน าพลาสตกเสรมใยแกว

ประต - รถยนต มอก. 1162 2548 อปกรณลอกประตและอปกรณยดประตของยานยนต

ปายทะเบยนรถ มอก. 2281 2549 อปกรณสองสวางแผนปายทะเบยน ดานทายยานยนตและสวนพวง


ปโตรเลยม มอก. 1829 2548 ผลตภณฑปโตรเลยมและสารละลายไฮโดรคารบอน - การตรวจหาไทออลและชนดของซล

เฟอร - การวเคราะหแบบดอกเตอร

แปรงสฟน มอก. 42 2548 แปรงสฟน

ผลตภณฑจากเนอสตว มอก. 1219 2547 แหนม

ผลตภณฑท าความสะอาด มอก. 2274 2549 ผลตภณฑฟอกผาประเภทเพอรออกไซด

ผลตภณฑปโตรเลยม มอก. 1829 2548 ผลตภณฑปโตรเลยมและสารละลายไฮโดรคารบอน - การตรวจหาไทออลและชนดของซล


ผลตภณฑฟอกผา มอก. 2274 2549 ผลตภณฑฟอกผาประเภทเพอรออกไซด

ภาชนะบรรจน า มอก. 435 2548 ถงเกบน าพลาสตกเสรมใยแกว

ภาชนะบรรจยา มอก. 2182 2547 ถวยแกวตวงยา

ภาชนะพลาสตก มอก. 435 2548 ถงเกบน าพลาสตกเสรมใยแกว

ยางมะตอย มอก. 2209 2548 อมลซฟายดแอสฟลตเคลอบหลงคา

ยานยนต - ชนสวน มอก. 2280 2549 อปกรณสะทอนแสงของยานยนตและสวนพวง มอก. 2281 2549 อปกรณสองสวางแผนปายทะเบยน ดานทายยานยนตและสวนพวง มอก. 2282 2549 โคมไฟเลยวยานยนตและสวนพวง



ยาสฟน มอก. 45 2549 ยาสฟน

รถยนต - การบ ารงรกษาและซอมแซม มอก. 2252 2548 สารขดเงาสรถยนต มอก. 2265 2549 สารขดเรยบสรถยนต

รถยนต - ชนสวน มอก. 1162 2548 อปกรณลอกประตและอปกรณยดประตของยานยนต มอก. 2280 2549 อปกรณสะทอนแสงของยานยนตและสวนพวง มอก. 2281 2549 อปกรณสองสวางแผนปายทะเบยน ดานทายยานยนตและสวนพวง มอก. 2282 2549 โคมไฟเลยวยานยนตและสวนพวง มอก. 2283 2549 โคมไฟแสดงต าแหนงดานหนาและดานทาย โคมไฟหยด และโคมไฟแสดงเคาโครงตวรถ

ของยานยนตและสวนพวง

รถยนต - ผลตภณฑบ ารงรกษาและซอมแซม มอก. 2252 2548 สารขดเงาสรถยนต มอก. 2265 2549 สารขดเรยบสรถยนต

รถยนต - สารขดเงา มอก. 2252 2548 สารขดเงาสรถยนต

วสดและอปกรณกอสราง มอก. 2209 2548 อมลซฟายดแอสฟลตเคลอบหลงคา

วสดและอปกรณงานทาง มอก. 415 2548 สจราจร

วสดและอปกรณทางการแพทย มอก. 1684 2541 วสดทใสในรางกายทางศลยกรรม - แนวทางเพอการดแลและจดการวสดทใสในรางกายทาง

ศลยกรรมกระดก มอก. 2159 2547 ชดใหสารละลายทางหลอดเลอดแบบบวเรตต มอก. 2182 2547 ถวยแกวตวงยา


มอก. 2278 2549 การฆาเชอเครองมอแพทย - ขอมลทผผลตตองจดหาส าหรบกระบวนการฆาเชอซ าเครองมอแพทย


วสดโลหะ - ศลยกรรม มอก. 1684 2541 วสดทใสในรางกายทางศลยกรรม - แนวทางเพอการดแลและจดการวสดทใสในรางกายทาง

ศลยกรรมกระดก

วารนช มอก. 2268 ล.1 2549 สและวารนช - การหาปรมาณสารประกอบอนทรยทระเหยได เลม 1 วธแตกตาง

มอก. 2268 ล.2 2549 สและวารนช - การหาปรมาณสารประกอบอนทรยทระเหยได เลม 2 วธกาซโครมาโทกราฟฟค

มอก. 2269 2549 สและวารนช - การทดสอบความทนการขดถแบบเปยก และการท าความสะอาดไดของผวเคลอบ

มอก. 2270 2549 สและวารนช - การหาความแขงของผวเคลอบ โดยทดสอบดวยดนสอ

มอก. 2271 2549 สและวารนช - การหาปรมาณสารประกอบอนทรยทระเหยไดของสอมลชน ทมสารประกอบอนทรยทระเหยไดปรมาณต า (สอมลชนทมน าเปนตวท าละลาย)

มอก. 285 ล.50 2549 วธทดสอบส วารนช และวสดทเกยวของ เลม 50 ความตดแนนโดยวธดง

มอก. 285 ล.51 2549 วธทดสอบส วารนช และวสดทเกยวของ เลม 51 ความทนละอองน าเกลอ

วธทดสอบ มอก. 1829 2548 ผลตภณฑปโตรเลยมและสารละลายไฮโดรคารบอน - การตรวจหาไทออลและชนดของซล


มอก. 285 ล.50 2549 วธทดสอบส วารนช และวสดทเกยวของ เลม 50 ความตดแนนโดยวธดง

มอก. 285 ล.51 2549 วธทดสอบส วารนช และวสดทเกยวของ เลม 51 ความทนละอองน าเกลอ

เวชภณฑ มอก. 1684 2541 วสดทใสในรางกายทางศลยกรรม - แนวทางเพอการดแลและจดการวสดทใสในรางกายทาง

ศลยกรรมกระดก มอก. 2159 2547 ชดใหสารละลายทางหลอดเลอดแบบบวเรตต มอก. 2182 2547 ถวยแกวตวงยา


มอก. 2278 2549 การฆาเชอเครองมอแพทย - ขอมลทผผลตตองจดหาส าหรบกระบวนการฆาเชอซ าเครองมอแพทย มอก. 2279 ล.3 2549 การฆาเชอเครองมอแพทย - วธการทางจลชววทยา เลม 3 ขอแนะน าในการประเมน

และแปลผลประชากรจลนทรยในผลตภณฑและในบรรจภณฑ

ศพทบญญต มอก. 2198 2547 อปกรณปกปองทางเดนหายใจ: ศพทบญญต /

สารขดเรยบ มอก. 2265 2549 สารขดเรยบสรถยนต

สารดดกลน มอก. 900 2547 ถานกมมนต

ส มอก. 2268 ล.1 2549 สและวารนช - การหาปรมาณสารประกอบอนทรยทระเหยได เลม 1 วธแตกตาง มอก. 2268 ล.2 2549 สและวารนช - การหาปรมาณสารประกอบอนทรยทระเหยได เลม 2 วธกาซโครมาโทกราฟฟค มอก. 2269 2549 สและวารนช - การทดสอบความทนการขดถแบบเปยก และการท าความสะอาดไดของผวเคลอบ มอก. 2270 2549 สและวารนช - การหาความแขงของผวเคลอบ โดยทดสอบดวยดนสอ มอก. 2271 2549 สและวารนช - การหาปรมาณสารประกอบอนทรยทระเหยไดของสอมลชน ทมสารประกอบ

อนทรยทระเหยไดปรมาณต า (สอมลชนทมน าเปนตวท าละลาย) มอก. 285 ล.50 2549 วธทดสอบส วารนช และวสดทเกยวของ เลม 50 ความตดแนนโดยวธดง มอก. 285 ล.51 2549 วธทดสอบส วารนช และวสดทเกยวของ เลม 51 ความทนละอองน าเกลอ มอก. 415 2548 สจราจร

สชอลก มอก. 2275 2549 สพาสเทลน ามน

เสอผา มอก. 2261 2549 เสอชนในชาย มอก. 2262 2549 กางเกงชนในชาย

หนากากกรองอากาศ มอก. 2198 2547 อปกรณปกปองทางเดนหายใจ: ศพทบญญต

หนากากกรองอากาศ - ศพทบญญต มอก. 2198 2547 อปกรณปกปองทางเดนหายใจ: ศพทบญญต


หลอดไฟฟา - ยานยนต มอก. 2281 2549 อปกรณสองสวางแผนปายทะเบยน ดานทายยานยนตและสวนพวง

หองปฏบตการ มอก. 2276 2549 หองปฏบตการทางการแพทย - ขอก าหนดดานความปลอดภย

แหนม มอก. 1219 2547 แหนม

อปกรณสองสวาง มอก. 2281 2549 อปกรณสองสวางแผนปายทะเบยน ดานทายยานยนตและสวนพวง

อปกรณสะทอนแสง มอก. 2280 2549 อปกรณสะทอนแสงของยานยนตและสวนพวง

แอนไฮดรสเททระโซเดยมไพโรฟอสเฟต มอก. 2273 2549 แอนไฮดรสเททระโซเดยมไพโรฟอสเฟต ส าหรบอตสาหกรรม

แอสฟลต มอก. 2209 2548 อมลซฟายดแอสฟลตเคลอบหลงคา


ALPHABETACAL SUBJECT INDEX

Subject Page

Abrasion 1

Accident prevention 1

Acoustics 1

Agricultural products 1

Air freighters 1

Air treatment devices 2

Air valves 2

Air valves - Waterworks 2

Aircraft components 2

Alarm systems 2

Aluminium alloys 3

Arc lamps 3

Armoured cables 3

Asbestos cement 3

Audio equipment 3

Audiometers 3

Audiometry 4

Auditory threshold 4

Autotransformers 4

Ball valves 4

Barrels (containers) 4

Bars (materials) 4

Beams 5

Billets 5

Biological analysis and testing 5

Blooms 5

Brakes 5

Braking system components 5


Subject Page

Bricks 6

Buildings 6

Butterfly valves 6

Calibration 6

Cards 6

Castings 7

Cement mortar 7

Cements 7

Check valves 7

Cheese 8

Chemical analysis and testing 8

Chemical reagents 8

Chlorides 8

Clay 8

Cleaning materials 8

Cloth 8

Clothing 9

Coated fabrics 9

Coating processes 9

Coatings 9

Cobalt alloys 10

Coded representation 10

Codes 10

Coffee 10

Colour-fastness tests 10

Compressed gases 10

Compressed gases - Automative fuels 11

Compressed gases - Quality 11

Concentration (chemical) 11

Concretes 11


Subject Page

Construction equipment 11

Cooking appliances 11

Corrosion protection 12

Cranes 12

Curing (concrete) 12

Dangerous materials 12

Data processing 13

Data transmission 13

Density measurement 13

Diagrams 13

Dimensional coordination 13

Dimensional measurement 13

Disinfectants 13

Dried foods 14

Drum brakes 14

Dry-type transformers 14

Electric cables 14

Electric conductors 14

Electric connectors 14

Electric control equipment 15

Electric convertors 15

Electric lamps 15

Electric plugs 15

Electric sockets 15

Electrical appliances 16

Electrical engineering 16

Electrical household appliances 16

Electrical insulation 16

Electrical measuring instruments 16

Electrical safety 17


Subject Page

Electrical transmission systems 17

Electrically-operated devices 17

Electromagnetic compatibility (EMC) 18

Electronic connectors - Fibre optics 18

Electronic equipment and components 18

Emergency equipment 18

Emission 18

Essential oils 19

Explosive atmospheres 19

Fabric testing 19

Fire detectors 19

Fire extinguishers 19

Fire hydrants 19

Fire resistance 20

Fire safety 20

Fish (meat) 20

Flanges 20

Flexible pipes 20

Flow measurement 20

Food products 21

Freezig point 21

Frozen foods 21

Fruit juices 21

Fuse-links 21

Fuses 21

Fusion welding 21

Gate valves 22

Gear boxes 22

Gear drives 23

Glycerol 23


Subject Page

Graphic symbols 23

Grinding machines (tools) 23

Hand-held tools 23

Hardness testing 24

Health and safety requirements 24

Helmets (protective) 24

High-voltage tests 24

Hosiery 24

Hot-dip coatig 24

Household electrical appliances 25

Humidifiers 25

Hydraulic transmission systems 25

Identity cards 25

Implants (surgical) 26

Information exchange 26

Information technology 26

Insects 27

Insulating oils 27

Internal combustion engines 27

Iron 27

Joints 27

Kitchen utensils 27

Knitted fabrics 28

Knoop hardness measurement 28

Labelling 28

Laboratories 28

Laboratory accreditation 28

Laboratory equipment 29

Laboratory glassware 29

Laces (footwear) 29


Subject Page

Lacquers 29

Laminates 29

Lamps 29

Lasers 30

Latices 30

Leather 30

Lifting 30

Lifting equipment 30

Lightning 30

Lightning protection 31

Linear measurement 31

Liquefied petroleum gas 31

Liquid chromatography 31

Low-temperature testing 31

Low-voltage installations 31

Machine-readable materials 32

Machine tools 32

Marks 32

Meat 32

Meat products 32

Mechanical properties of materials 32

Metal coatings 32

Metals 33

Milk 33

Mosquito mats 33

Natural gas 33

Natural rubber 34

Nickel 34

Nickel containing alloys 34

Non-volatile matter determination 34


Subject Page

Occupational safety 34

Open systems interconnection 34

Optical fibres 35

Optical scanners 35

Outlet connections 35

Packaging 35

Packaging - Testing 35

Paints 35

Palm kernel oil 36

Paper pulp 36

Petrol engines 36

Petroleum products 36

Pigments 36

Pilling tests 36

Pineapples 37

Pipe fittings 37

Pipelines 37

Pipes 37

Pipework systems 38

Piping 38

Piston rings 38

Plastics 38

Plastics and rubber technology 38

Plug valves 38

Plywood 39

Porous materials 39

Potentiometric methods 39

Preservation 39

Pressure equipment 39

Pressure pipes 39


Subject Page

Pressure vessels 40

Processed foods 40

Protective coatings 40

Quality assurance 41

Quantitative analysis 41

Radio disturbances 43

Receivers 43

Receivers - Measurement 43

Refractory materials 43

Refuelling stations 43

Reinforcing materials 43

Relishes (food) 44

Road vehicles 44

Room humidifiers 44

Rubber 44

Safety measures 44

Sampling methods 45

Sanitary appliances 45

Savoury sauces 45

Scouring powder 45

Sealers 45

Sections (structures) 45

Sheet materials 45

Shell fish 46

Shielding (Electricity) 46

Shower baths 46

Shrimps 46

Signal devices 46

Silicon 46

Sockets 46


Subject Page

Sound broadcasting 47

Sound generators 47

Steels 47

Storage batteries 47

Structural design 47

Structural steels 47

Structural timber 48

Structures 49

Surface treatment 49

Switchgear 49

Switchgear - High voltage 49

Television broadcasting 49

Television receivers 50

Temperature control 50

Test equipment 50

Testing 50

Testing conditions 50

Textile fibres 51

Textile machinery and accessories 52

Textile testing 52

Textiles 53

Thermal cutting 55

Thermistors 55

Tin alloys 55

Toasters 55

Tomatoes 55

Toroidal sealing rings 55

Toys 56

Transformers 56

Unalloyed steels 56


Subject Page

Vacuum devices 56

Valves 56

Valves for water supply in buildings 57

Varnishes 57

Vehicle lights 57

Vehicles 57

Video signals 57

Vitrified china 57

Vocabulary 58

Volume measurement 58

Vulcanized rubber 58

Warning devices 58

Washing machines 58

Water 58

Water purification 59

Water treatment 59

Water works 59

Wear resistance 59

Welding 59

Wire ropes 60

Wood 60


หวเรอง

หวเรอง หนากระดก - การรกษา 61การฆาเชอ 61การรบกวนคลนวทย 61การรบกวนทางแมเหลกไฟฟา 61คลนแมเหลกไฟฟา 62คลนวทย 63เครองเขยน 63เครองแตงกาย 63เครองมอและอปกรณส านกงาน 63เครองส าอาง 63โคมไฟ - ยานยนต 63โคมไฟ - รถยนต 64ฉนวนกนความรอน 64ชดใหสารละลาย 64ถงน า 64ถานกมมนต 64ทนตอนามย 64น าดม 64บรรจภณฑ 64ประต - รถยนต 64ปายทะเบยนรถ 64ปโตรเลยม 65แปรงสฟน 65ผลตภณฑจากเนอสตว 65


หวเรอง หนาผลตภณฑท าความสะอาด 65ผลตภณฑปโตรเลยม 65ผลตภณฑฟอกผา 65ภาชนะบรรจน า 65ภาชนะบรรจยา 65ภาชนะพลาสตก 65ยางมะตอย 65ยานยนต - ชนสวน 65ยาสฟน 66รถยนต - การบ ารงรกษาและซอมแซม 66รถยนต - ชนสวน 66รถยนต - ผลตภณฑบ ารงรกษาและซอมแซม 66รถยนต - สารขดเงา 66วสดและอปกรณกอสราง 66วสดและอปกรณงานทาง 66วสดและอปกรณทางการแพทย 66วสดโลหะ - ศลยกรรม 67วารนช 67วธทดสอบ 67เวชภณฑ 67ศพทบญญต 68สารขดเรยบ 68สารดดกลน 68ส 68สชอลก 68


หวเรอง หนาเสอผา 68หนากากกรองอากาศ 68หนากากกรองอากาศ – ศพทบญญต 68หลอดไฟฟา - ยานยนต 69หองปฏบตการ 69แหนม 69อปกรณสองสวาง 69อปกรณสะทอนแสง 69แอนไฮดรสเททระโซเดยมไพโรฟอสเฟต 69แอสฟลต 69