tire&wheel equipment for auto/car/motor-sylvan

Model WH0101/0109 WH0104/0111/0115 WH0119

Standard clamping 10"-23" 10"-25" 12"-28.5"External clamping 10"-20" 10"-22" 12"-26.5"Internal clamping 12"-23" 12"-25" 14"-28.5"Maximum tire width 13",330mm 14",356mm 14",356mmMaximum tire diameter 40"(1100mm) 45"(1150mm) 45"(1150mm)Working air pressure 8-10bar 8-10bar 8-10barBead breaker force 25kN(2500kg) 25kN(2500kg) 25kN(2500kg)Noise <70db <70db <70db

Power Supply 380v/220v/50HZ/3/PH/1ph

380v/220v/50HZ/3/PH/1ph 380v/220v/50HZ/3/PH/1ph

N.W./G.W. 210KG/255KG 230KG/ 280KG 450KG/ 500KG

Packaging size 970*755*1015mm 223L1000*350*350mm (with right helper )

1140*830*1055mm 225L/325R,1000*350*350mm (with left helper)

1140*830*1055mm 1000*350*350mm(2 helper)

TYRE CHANGER

WH0101 WH0104 WH0109

WH0111 WH0115 WH0119

FunctionsUsed for Various Cars, SUV, Light-Truck, Coach & Motorcycle

Specifications

ECONOMICAL

BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTDTEL: 86-10-56292661-10 86-10-56292661-16

ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO

TYRE EQUIPMENT SERIES


TYRE CHANGER

WH0105

WH0113

WH0121WH0118WH0117

WH0106

WH0116

WH0125

WH0110WH0108

WH0114

WH0122

WH0107 WH0112



TYRE E

QUIPM

ENT SE

RIES

Model Column TypeUpper hori-zontal Arm Type

Lock Of Hexagonal arm Inflation Type Foot Pedals

Fast Inflation Device &Air Tank &Meter

Left Arm WH-L01

Right Arm WH-R01

WH0105 Square Swing Manual Manual air gun 3 No No No

WH0106 Round Swing Manual Manual air gun 3 No No No

WH0107 Square Swing Manual Manual air gun 3 No No No

WH0108 Round Swing Manual Manual air gun 3 No No No

WH0110 Square Swing Manual Pedal-powered 3 Yes No No

WH0112 Round Swing Manual Pedal-powered 3 Yes No No

WH0113 Backwards Push/Pull Pneumatic double-locking Manual air gun 4 No No No

WH0114 Backwards Push/Pull Pneumatic double-locking Manual air gun 4 No No No

WH0116 Backwards Push/Pull Pneumatic double-locking Pedal-powered 4 Yes No No

WH0117 Square Swing Manual Manual air gun 3 No Yes No

WH0118 Round Swing Manual Pedal-powered 3 Yes Yes No

WH0121 Backwards Push/Pull Pneumatic double-locking Manual air gun 4 No No Yes

WH0122 Backwards Push/Pull Pneumatic double-locking Manual air gun 4 No No Yes

WH0125 Backwards Push/Pull Pneumatic double-locking Manual air gun 4 No Yes Yes

Model WH0105/WH0106 WH0107/WH0108/WH0110/WH0112/WH0113/WH0116/WH0121 WH0117/WH0118/WH32A/WH0122//WH0125

Power Supply 220V/50Hz/1Ph 380V/50Hz/3Ph 220V/50Hz/1Ph 380V/50Hz/3Ph 220V/50Hz/1Ph 380V/50Hz/3Ph

External clamping 10”-18” 10"-20" 12"-24"

Internal clamping 12”-22” 12"-24" 15"-28"

Maximum tire diameter 1000mm(40”) 1150mm(45.3") 1150mm(45.3")

Maximum tire width 310mm(12") 356mm(14") 356mm(14")

Bead breaker force 27 kN (2700 kg) 27 kN (2700 kg) 27 kN (2700 kg)

Working air pressure 8-10 Bar(114-145 Psi) 8-10Bar(114-145Psi) 8-10 Bar(114-145 Psi)

Protection pad with turntable

② High strength column frame

connection ensures the col-umn’s shape of left help during operation.

① Lateral moveable

pressing tyre roller which is self-rotary.

⑤ High strength

column de-signed.

④ Special pressure moles

make sure the depth of press-ing tire, and it could help to lift tire

③ Vertical lift press tire cylinder.

③ Rotating plate, convenient

for changing tire.Copper screw adjust slide way accurately.

① Rotary arm with 3 part, it’s convenient to operate with.

② Rotary arm with 3 part, it’s convenient to

operate with.

④ High strength column.Big size

diameter bead breaker vertical cylinder

Switch’s construc-tion contains many pure silver contacts.

Pedal-powered infla-tion, inflation watch & box and air lank pos-sessed

Detachable foot pet-als assemble’ cover

F o o t p e t a l f o r b e a d breaker cylinder is on right side of machine;

Tool head is made of spec ia l a l loy steel

Stainless Steel is adopted for bead breaker cylinder

Motor is made of pure copper wire;

Used for Various Cars, SUV, Light-Truck, Coach & Motorcycle

- Turntable with 4 clamping with self-centered construction.

- Two sets of clamping cylinder assembly. - Dual role bead breaker shoe control

cylinders. - Alumina alloy foot pedals. - Electronic control turntable clockwise and

counterclockwise rotation. - Clamping control foot petals in cylinder

forward step by step, it’s convenient and promptly to folder rims.

- Standard water-oil separator with pressure watch.

- 20»Crow-barwith sleeve for protection aluminum alloy rim.

Functions Specifications

Details

Features




WH0120 WH0124

Column and upper arm

Round Shaped column, Swing Arms type, Ro-tate handwheel limit. Hexagon head bolt shaft control vertical lift

Automatic backwards column; horizontal slide arm, six-axis Vertical lift

Locking manual locking. Pneumatic double-locking.

Pedals 3 Alumina alloy foot pedals. 4 Alumina alloy foot pedals.

helpers

Left helper WH-L01 bead breaker vertical cyl-inder, control rotating arm, its more convenient, fast, safe and savi more energy when helping the hard tyre port, low-profile, Run Flat tyre’s operation.

Right helper WH-R01 bead breaker vertical cylinder control rotating arm, lateral moveable pressing tyre roller, rotating plate, its more convenient, fast, safe and save more energy when helping the hard tyre port, low-profile, Run Flat tyre’s operation.

Center plate structure could be adjusted up and down.

Tool head is made of special alky steel

Plastic tool box is matched on the upper cover of box.

Model WH0120 WH0124

Power Supply 220V/50HZ/1Ph 380V/ 50Hz/3Ph 220V/50HZ/1Ph 380V/ 50Hz/3Ph

External clamping 10”-34” 10”-28”

Internal clamping 35-368mm(1.4”~14.5’) 35-368mm(1.4”~14.5’)

Maximum tire diameter 1150mm(45.3”) 1150mm(45.3”)

Maximum tire width 356 mm(14”) 356 mm(14”)

Bead breaker force 27 kN (2700 kg) 27 kN (2700 kg)

Working air pressure 8-10 Bar(114 -145 Psi) 8—10 Bar(114 -145 Psi)

Wheel lift capacity 80KG 80kg

Noise Level <70Db <70Db

N.W./G.W. 305KG/370KG 425KG/490KG

Special pressure moles make sure the depth of pressing tire, and it could help to lift tire.

The designation of lift jacket complete the vertical lifting operation more easy.

Stainless Steel is adopted for bead breaker cylinder

Motor is made of pure copper wire;

Features - Center disc plate, cone and quick nut locked, fixing wheel more convenient and faster. - Wheel lift raise big size wheel more convenient, fast, save labor. - Dual role bead breaker shoe control cylinders. - Electronic control turntable clockwise and counterclockwise rotation. - Manual air gun. - Standard water-oil separator with pressure watch. - 20” Crow-bar with sleeve for protection aluminum alloy rim.

Specifications

Differences

Details

TYRE CHANGER

WH0120 WH0124

WH0123



TYRE E

QUIPM

ENT SE

RIES

TYRE CHANGER FOR TRUCKS

AND BUSESModel WH0126 WH0127 WH0128 WH0129 WH0130Rim diameter 14”- 26” 14”-42” 14”-42” 14"-56" 14"-26"

Max. wheel weight 500kg 1600kg 1600kg 2000kg 2500kg

Max. wheel width 780mm 1050mm 1050mm 1200mm 600mm

Max. tyre diameter 1600mm 2300mm 2300mm 2500mm 1300mm

Hydraulic pump motor 1.5kW 380V-3Ph (220V Optional)

2.2kW 380V-3Ph-50Hz (220V Optional)

2.2kW 380V-3Ph-50Hz (220V Optional) 2.4/3.0kW 1.1kW

Geartox motor 1.8kW 380V-3Ph (220V Optional)

2.2kW 380V-3Ph-50Hz (220V Optional)

2.2kW 380V-3Ph-50Hz (220V Optional) 2.4/3.0kW 1.1kW

Bead breaker force 8S 2500kg 3300kg 3300kg

Operation control voltage 24V 24V 24V

Power 220/400V 50/60HZ 1P/3P Optional

220/400V 50/60Hz 1P/3P (Optional)

220/400V 50/60Hz 1P/3P (Optional) 400V 3Ph 50Hz 220/400V 1/3Ph 50/60Hz (Optional)

Gross weight 647 850kg 1300kg 580kg

Outside dimension (L×W×H) 2030x1600x1000 2130×1850×1090mm 2130×1930×1050mm 2310×2080×1100mm 150×1000×1550mm

STANDARD ACCESSORIES

Alu Alloy Rims Protection Set

Alu Alloy Rims Protection Rings

TYRE CHANGER WH0126

WH0129

WH0127

WH0130

WH0128

Specifications




Set of cones Quick nutBalance axis

Plastic safe guard

Counter weight(plier)Balance axis-1

WH0201/WH0202/WH0203/WH0204/WH0205 WH0206Max.Wheel Weight 60kg 150kg

Motor Power 180-300W 500w

Voltage AC220v 50Hz AC220v 50Hz

Balancing Precision ±lg ±1g

Balancing Speed 200R.RM 200R.P.M

Rim Diameter 10”-24”/256-615mm 10”-26”/256-615mm

Rim Width 1.5”-20”/40-510mm 1.5”-20”/40-510mm

Balancing Time Required 10s 10s

Noise Level <70dB(A) <70dB(A)

Working Temperature 0°C~50°C 0°C-50°C

Machine Weight Approx 65kg 278kg

Large centring cone(options)

Wheel width calliper

WHEEL BALANCER

WH0201 WH0202 WH0203

WH0206WH0205WH0204

Specifications



TYRE E

QUIPM

ENT SE

RIES

WH0207 WH0208 WH0209

Rim width 5.5 • -20” 5.7”-20”

Rim diameter 13” -24“ 16”-24”

Max. wheel diameter 1200mm 1250mm 1250mm

Max. wheel weight 150kg 200kg

Testing time 8s 12-20s

Air pressure 6-8 bar 8-10bar

Protection cover supplied Supplied

Pneumatic built-in lift supplied Supplied

Power supply 400V/220V optional 400V/220V 50/60Hz 1P/3P(Optional)

Standard accessories(supplied)

International universal standard flange tapering(diameter range40-285mm) Wheel width calipers. Lock nut Wheel ballast weight pliers

Wheel lifter,wheel flange,air filter anchor bolts,plier,cone,caliper,wheel ramp

Gross Weight (kg) 320 370

Standard accessories

Optional accessoriesPlastic safe guardCounter weight(plier)

- WH0207/WH0208 - Easy operation of lifting device and mount-demount tyre with protection lever, well-

consideration safety and stable. - The microprocessor is composed of integrate circuit, with high-capacity and high-stability

can realize the converting of big or small model wheels, suitable for truck(bus),car and motorcycle wheels.

- The microprocessor is composed of integrate circuit, with high-capacity and high-stability can realize the converting of big or small model wheels, suitable for truck(bus),car and motorcycle wheels.

- WH0209 - Keypad control panel with bright LED displays indicate 2 weight amounts 2 weight

locations, - 3D rim dimension data entry, and 3 selection balance mode. - Precise wheel clamping system flange, easy and fast to fix the wheel on the measuring

balancer axle. - Safety set: With microswitch the wheel cover is on position, then the wheel begins to

rotate.

WHEEL BALANCER

TYRE BALANCER FOR TRUCKS AND BUSES

WH0207

WH0209

WH0208

Specifications Features




WH0301 WH0302 WH0303Measurement accuracy 0.02° 0.02° 0.02°Repeated measurement accuracy <0.06° <0.06° <0.06°Accuracy option Y Y YSystem setting synchronous time 0.25s 0.25s 0.25sCable/Desktop charge cable cable bothDatabase upgrading via internet Y Y YSensor synchronous display Y Y YEmbedded sensor mainboard Y Y YCustomer correction Y Y YImported inclinometer Y Y YCCD imported CCD Y Y YExternal height rule N Y YTyre phase monitor N N YCabinet control unit LCD N N YWristlet PDA N N YTeaching simulator N N Y

Measure Items Accuracy Range

Front wheel

Toe ±1′ ±24°Camber ±1′ ±10°Caster ±2′ ±20°Steering axle Inclination ±2′ ±20°Set-back ±1′ ±10°

Rear wheel

Toe ±1′ ±24°Camber ±1′ ±10°Set-back ±1′ ±10°Thrust-angle ±1′ ±10°

90° rolling compensation for swift and convenient 4 wheel synchronous compensation with higher accuracy. only WH301,WH303.

3D animation navigation and training video, delivering a dazzling visual and instructional experience.only WH302,WH303.

Dual modes of wired and wireless communication, more reliable performance.(only WH303)

CCD infrared image recognition and measurement technology with super self-adapting ambient light.Self-adapting ambient light, 360° measurement field around vehicle, highest precision and widest applicative scope.6 beam infrared CCD for WH301-8 beam infrared CCD for WH302,WH303.

Measurement and alignment available even on power outage.only WH303.

Mutual control between sensor head and PC mainframe, not needing operator to run back and forth. (only WH303)

Self-diagnosis, repair and correction with sensor unified and individual correction available.

Vehicle database from internationally authoritative Auto Data® Co., of U.K. (licensed), covering over 20,000 car models worldwide, twice upgrade per year via internet. Multi-language audio guidance and instruction, simple to use, easy to follow.

Windows® XP or 7 operation system on LCD.

Data freezing program(JACK-HOLD) for alignment adjustment and auto parts replacement on lift, not worrying about fluctuation and change of measured data.

Low chassis and small size wheel measurementby inclining sensors, extending the scope of applied vehicles.Front wheel quick measurement and adjustment, needless of rear wheel sensors.

Lift runway calibration and compensation, guaranteeing accurate alignment even on non-level lift runway.

Customer vehicle alignment plan and management for noting, reviewing alignment history and optimizing alignment steps and key points.

Operation status recorder(“Black box”) for recording and reviewing alignment operation status, guaranteeing proper utilization and maintenance of wheel aligner.

New generation“Zigbee” wireless communication technology for replacing outdated Bluetooth technology, with stronger networking capacity, greater reliability, lower energy-consumption and faster data transmission over longer distances.

Work efficiency management for recording operation steps, analyzing operation problems and increasing work efficiency.

WHEEL ALIGNMENT

WH0301

WH0303

WH0302

1 SET OF BRAKE FIXE

1 SET OF STEERING WHEEL FIXER

4 ELABORATELY DESIGNED MECHANICAL TURNTABLES

8 LITHIUM BATTERIES WITH HIGH CAPACITY ANG LONG PERIOD

4 UNIVERSAL SELF-CENTERING 4-POINT WHEEL CLAMPS WITH RANGE 11-29

1 SET OF INKPRINTER

1 SET OF STEERING WHEEL FIXER

Functions

Features Specifications



TYRE E

QUIPM

ENT SE

RIES

WHEEL ALIGNMENT

WH0304

WH0305

1 SET OF BRAKE FIXE

4 ELABORATELY DESIGNED MECHANICAL TURNTABLES

8 LITHIUM BATTERIES WITH HIGH CAPACITY ANG LONG PERIOD

4 UNIVERSAL SELF-CENTERING 4-POINT WHEEL CLAMPS WITH RANGE 11-29

1 SET OF INKPRINTER

Packing size with iron belt plywood box(unit: mm)

Packing size with iron belt plywood box(unit: mm)

8 beam infrared CCD image recognition and measurement technology.Self-adapting ambient light, 360° measurement field around vehicle, highest precision and widest applicative scope.

Mutual control between sensor head and PC mainframe, not needing operator to run back and forth.

6/8 sensors with touch-key and personalized image-text interface, suitable for accurate alignment of all vehicles, including all large scale vehicles such as truck, van, tractor, bus, coach, semi- and full- trailer, and various kinds of cars.

New generation “Zigbee” wireless communication technology for replacing outdated Bluetooth technology,with stronger networking capacity, greater reliability, lower energy-consumption and faster data transmission over longer distances.

Windows® XP or 7 operation system on LCD

3D animation navigation and training video, delivering a dazzling visual and instructional experience.

Data freezing program (JACK-HOLD) for alignment adjustment and auto parts replacement on lift,not worrying about fluctuation and change of measured data.

Front wheel quick measurement and adjustment, needless of rear wheel sensors

90° rolling compensation (only for car) for swift and convenient 4 wheel synchronous compensation, guaranteeing measurement accuracy.

Self-diagnosis, repair and correction with sensor unified and individual correction available.

Operation status recorder(“Black box”) for recording and reviewing alignment operation status,guaranteeing proper utilization and maintenance of wheel aligner

Multi-language guidance and instruction, simple to use.

Low chassis measurement by inclining sensors, extending the scope of applied vehicles.

Lift runway calibration and compensation, guaranteeing accurate alignment even on non-level lift runway.

Vehicle database from internationally authoritative Auto Data® Co., of U.K. (licensed),covering over 20,000 car and more than 8,000 truck models worldwide, twice upgrade per year via internet.

Customer vehicle alignment plan and management for noting, reviewing alignment history and optimizing alignment steps and key points.

Work efficiency management for recording operation steps, analyzing operation problems and increasing work efficiency

Measure Items Accuracy Range

Front wheel

Toe ±1′ ±24°Camber ±1′ ±10°Caster ±2′ ±20°Steering axle Inclination ±2′ ±20°Set-back ±1′ ±10°

Rear wheel

Toe ±1′ ±24°Camber ±1′ ±10°Set-back ±1′ ±10°Thrust-angle ±1′ ±10°

6 sensors

8 sensors

WHEEL ALIIGNER FOR TRUCKS AND BUSES

Functions Specifications




WHEEL ALIGNMENT

WH0306

Measuring range: 1.wheel camber angle: +8°, - 4°, reading resolution 0.1°; 2.king pin caster angle: +15°, - 3°, reading resolution 0.1°;3.king pin inclination angle: +15°, - 3°, reading resolution 0.1°; 4.toe-in: ±40 millimeter;5.wheel corner: Transfers in a big way outward inward, each 60°, resolution 0.1°.




NITROGEN TYRE INFLATOR

WH0401 WH0402 WH0403 WH0404

Model WH0401 WH0402 WH0403 WH0404

Air inlet pressure 8~10KG/cm2 8~10KG/cm2 8~16KG/cm2 0~16KG/cm2

Air outlet pressure 0~7KG/cm2 0~7KG/cm2 0~15KG/cm2 0~15KG/cm2

N2 generating speed 55-70 L/min 55-70 L/min 55-70 L/min 55~70 L/min

Air compressor required 8KG/cm2 8KG/cm2 16KG/cm2 16KG/cm2

Internal Tank 20L 40L 40L 120L

Rating input voltage 220V 50/60Hz 220V 50/60Hz 220V 50/60Hz 220V 50/60Hz

Dimension (W*D*H) 62*40*150CM 62*40*150CM 70*60*150CM 70*60*150CM

Packing size: (W*D*H) 66*50*161cm 66*50*161cm 74*64*166cm 80*70*166cm

Net Weight 60Kgs 70Kgs 130Kgs 150Kgs

WH0401 WH0402 WH0403 WH0404

- N2 inflation for cars and mini-bus - European Design with ABS cabinet - Internal tank - Large LED display - Nitrogen gas purity: 93%-97% - Manual operation, with air inflation gun

- N2 inflation for car & mini-bus - Full Automatic - Inflate 2 tires at the same time, - Unit reading Kpa, Psi, Kg, Bar is changable - 40L N2 storage tank (buit-in) - Nitrogen gas purity: 95%-99% - 10M inflation hose

- N2 inflation for cars, trucks and heavy vehicles

- Internal tank: 40L - Nitrogen gas purity: 93%-97% - Manual operation, with air inflation gun

- N2 inflation for car & mini-bus - Full Automatic - Inflate 4 tires at the same time, set

different tire pressure to rear tires & front tires

- Unit reading Kpa, Psi, Kg, Bar is changable

- 120L N2 storage tank (buit-in) - With counting function which records

how many times it has Inflated - Nitrogen gas purity: 95%-99% - 4 x10m inflation hose

Specification:

Feature:



TYRE E

QUIPM

ENT SE

RIES

TIRE EXPANDER

WH0501

WH0503

WH0502

WH0504

The hook can be adjusted according to the tire width for medium-sized and small tire.The operating platform can be turned to any place with ideal light during tire repairing. Technical parameter: Applicable scope for small tire

According to the tire size, fix the hook into the proper mounting hole and adjust the height of hook support.The tool shelf makes tools within reach for convenient picking-up and putting-back.The illumination can also be adjusted according to the working place.The water and oil separator can make lubrication function well and With keeping certain oil level in the oil cup, water moisture in the air cannot go inside the air cylinder.Perfect foot-operated pneumatic system allows the suspension at any place during expanding without air leaking all the 24 hours. Technical parameter: Working pressure 0.8-1.0MPaFor tire width below 12.00Dimension: 610x630x1020mmGW:80KGNW:60 KG

The hook can be fixed at three different levels and be adjusted to fit the tire.Perfect foot-operated pneumatic system allows the suspension at any place during expanding without air leaking all the 24 hours.The knob for air-flow adjustment can set the air flow according to the tire size. Technical parameter: Working pressure 0.8-1.0MPaFor tire width below 12.00Dimension: 610x630x1020mmGW:80KGNW:60 KG

Floor-typeThe hook can be fixed at three different levels and be adjusted to fit the tire.The floor type enables the operator to adjust the operating platform height accordingly.The auxiliary tire-loading device can help load the oversized tire with reduced manpower costs and improved efficiency. Technical parameter: Working pressure 1.0-1.2MPaFor tire width below 1,200-20 large and medium-sized tireDimension: 1250x820x760mmGW: 183KGNW: 160 KG

Manual

PneumaticPneumatic

Pneumatic




TUBELESS TIRE POINT VULCANIZING MACHINE

WH0601

WH0603 WH0604

WH0602

It is specially designed to vulcanize tubeless damage.It can heat both upper part and lower part simultaneously or separately, and can set the heating time by the timer.This machine is equipped with pneumatic jacking system which can adjust height freely. In the bottom of the machine, wheels are provided to adjust damage position. The spring mechanism is set in force application position to apply force during vulcanizing tires. Technical parameters: Technical parameters: 220VPower: 800WVulcanizing temperature: adjustableOperating pressure: 1.0-1.2MPaApplicable range: all sorts of small size tires.Dimension: 400×200×500mmWeight: 8KG

Car cover tires point vulcanizing machine and mated moulds are specially designed for car tires repair.This machine is equipped with auto temperature control device, and can heat a single surface or double surfaces. It has three extension sections in different length, which can meet various requirements of tire crowns in different depth. Technical parameter: Supply voltage 220VPower 800WVulcanizing temperature automatic controlDimension: 620×135×350mm

Weight: 13KG

Designed for repairing the tire lateral surface Technical parameter: Supply voltage 220VPower 800WVulcanizing temperature automatic controlDimension: 620×135×350mmWeight: 12KG

Technical parameters: Supply voltage: 220VPower: 800WVulcanizing temperature: adjustableApplicable range: vulcanization of small damage of tube and cover tires of small size tiresDimension: 570x280x810mmWeight: 29KG



TYRE E

QUIPM

ENT SE

RIES

TUBELESS TIRE POINT VULCANIZING MACHINE TUBELESS TIRE POINT VULCANIZING MACHINE

WH0605

WH0607

WH0606

It can vulcanize any part of model 750-16 to model 1000-20 tires in single surface or double surfaces.It can maintain constant temperature automatically to ensure the temperature required during tire vulcanization. It can raise, lower or overturn the operating bracket to vulcanize according to the repair position of the tires of different models.It is equipped with five moulds in different angle and a purpose made heat conduct sand bag, which can ensure the repaired tire more conforms to the normal condition. Technical parameters: Supply voltage: 220VPower: 800WVulcanizing temperature: auto controlledApplicable range: 750 to 10.00-20 tires.Dimension: 600x300x1150Weight: 50KG

It can heat carrier rotationally and flexibly. The angle can be adjusted according to the technological requirements to vulcanize the tires below 9.00 to motor tires.Temperature adjustable equipment can ensure the adequate vulcanizing temperature.Particular earth leakage protection system makes the machine more reliable and safe.Purpose made heat conducted sand bags and mated moulds are provided to make the tires under vulcanization more conforms to the normal condition. Heating parts can operate rotationally in full 360°according to the tire vulcanizing position. Technical parameters: Supply voltage: 220VPower: 1,000 WVulcanizing temperature: adjustableApplicable range: tires below 9.00Dimension: 940x380x1400mmWeight: 93KG

Point vulcanizing machine for cover tires of truck and mated moulds are specially designed for the tires and tubeless tires of trucks above 8.25-20 and forklifts.This machine is equipped with auto control device and can be used to vulcanize single surface and double surfaces.It is equipped with six moulds and purpose made heat transfer sand bags.The vulcanized tire is even and smooth. Technical parameters: Supply voltage: 220VPower: 800WVulcanizing temperature: auto controlledDimension: 580x140x800mmWeight: 35KG




TUBELESS TIRE POINT VULCANIZING MACHINEWH0608

WH0610

WH0609

This machine adopts heating pipes for heating, and can repair wide range of tires in easy operation. It can heat three surfaces simultaneously or one surface singly upon demand. So it is indeed an economic machine that can save energy. Supply voltage: 220V/380VPower: 5KWThermo-compression area: a quarter area of tiresVulcanizing temperature: 135-145Applicable range: 9.00-12.00 tiresDimension: 1090x880x930mm

Weight: 340KG

It adopts heat-conducting oil as the heat transfer medium which enjoys nice heat preservation performance. It heats evenly and gets a better vulcanizing effect, thus ensuring no obvious trace will be left in the repaired part.It has energy saving function and can vulcanize single surface when repairing the small cut, thus avoiding complete machine heating waste. Technical parameters: Supply voltage: 220V/ (380V customized)Power: 7KWThermo-compression area: a quarter area of tiresVulcanizing temperature: adjustableDimension: 1090x880x930mmWeight: 375KG

This machine adopts heating pipes for heating, and can repair wide range of tires in easy operation. It can heat three surfaces simultaneously or one surface singly upon demand. So it is indeed an economic machine that can save energy. Technical parameters Supply voltage: 220V/380VPower: 5.4 KWThermo-compression area: a quarter area of tiresVulcanizing temperature: 135-145Applicable range: 7.50-12.00 tiresDimension: 940x940x900mmWeight: 290KG



TYRE E

QUIPM

ENT SE

RIES

TUBELESS TIRE POINT VULCANIZING MACHINE

WH0611 WH0612

It is specially designed for engineering truck tires service, and is completely auto controlled; meanwhile, it can also heat for vulcanization in the single surface. It is a safe, green, efficient, and energy saving product equipped with time alarming indicator light.It ensures the normal use of the repaired and vulcanized tire thus prolonged the service life of the tire.Note: 17.5-25 tires mould is optional Technical parameters: Supply voltage: 220V/380VPower: 12KWThermo-compression area: a quarter area of tiresVulcanizing temperature: 135-145Applicable range: 20.5-25 tires 23.5-25 tiresDimension: 1510×1510×1280mmWeight: 936KG

This machine is the latest product which is researched and developed for repairing the tires of heavy mine truck. It is a perfect equipment to repair giant tires which solves the problems of giant tires repair and saves lots of funding. Technical parameters: Supply voltage: 380VPower: 17KWWeight of complete machine: 1TVulcanizing temperature: adjustableOperating air pressure: 0.35-0.5MpaApplicable tires: special for 24.00-35 mine truck tires.




RIMS REPAIR MACHINE

WH0701

- he model WH0701 is designed and manufactured to repair by straightening all kind of steel aluminium and alloy wheels with range diameter between 10’- 22.5’ The system uses an easy to handle piston controlled by an hydraulic unit that conveniently positioned pushes on the damaged part of the rim taking it back to the original shape,Such operation is made easier with the aid of a wide set of shaped punches that perfectly lean tothe different rim profiles,WH0701 moreover is equipped with a lathe unit that allow safter the wheel straightening operation to remove dents on the edges.

Height 1250 mm

Width 1110 mm

Length 900 mm

Machining capac-ity 10’--22.5’

Rotation 110rpm

Hydraulic piston power

0.55kw/0.75 HP Sound 35 db,3Phase - single phase, 220V - 380 V

Working motorMechanic0,55 kw, 1 hp,3phase - single phase, 220V - 380 V

Working pressure 140bar

Gross/Net Weight 350/330kg

No. Item Specification Qty

1Connecting flanges for different sizes of rims

Rim to center washer 10

Φ54 1Φ56.5 1Φ57 1Φ58 1Φ59.5 1Φ60.1 1Φ63.3 1Φ64 1Φ65 1Φ66.6 1Φ72 1Φ72.5 1

2 Gauge 1

3 Pole for positioning the deformed part 1

4 Allen head wrenches

5# 16# 18# 110# 112# 1

5 Angular supports 16 Square supports 27 Gradual supports 2

8 Cutter type sup-ports 4

9 Supports miles 410 Lever 111 Lathe cutter 1

12 Front supporting seat 1

13 Rear supporting seat 1

14 Professional wrench 19# 1

15 Centering ring 1

16Cross sliding part(including cut-ter holder)

1 set

17 Flange(including 5 fixing bolt) 1 set

Specification:

Features:



TYRE E

QUIPM

ENT SE

RIES

TIRE INFLATOR

WH0801

WH0804

WH0803

WH0802

- Automatic identification and adjustment for required pressure.

- High precision testing device. - Unique pressure sensor and encapsulation

technics. - Exclusive super large LCD display. - Human-based design,easy and simple to handle. - Adopts safety pressure setting device. - CE conformance

- Auto-start inflation; - Adjustable Over Pressure Setting(OPS); - Automatic zero drift adjustment; - Comprehensive diagnostics and error

reporting; - 2 large backlight LCD display, shows

operation mode; - Suits Standard nitrogen bottle/Direct

nitrogen supply from generator/Air Compressor;

- Long life design, up to 2 days of average usage before recharge.

- CE conformance

- 4 air outlets allow simultaneous inflation of up to 4 tires;

Model WH0803/WH0801 WH0804/WH0802

Applicable Vehicles Motorcycles, Cars, Mini Buses and Light Trucks

Motorcycles, Cars, Vans, Mini-Buses and Light Trucks.

Power Supply 110V/220V/50~60Hz 110V/220V/50~60Hz

Power Consumption 24V DC 24V DC

Motor Power 40W 40W

Max. Input Pressure 145psi/10bar 240Psi/16.5Bar

Set Pressure Range 5~110Psi/0.3~8Bar 5~150Psi/0.3~10Bar

Working Temperature -20~+70˚C -20~+70˚C

Accuracy ±1%+0.5 psi ±1Psi/0.07Bar

Display Mode 14”×7”LCD Display with Backlight. LCD

Packing size0803:730×420×240(mm) 0801:465×230×120(mm)

0804;1400×450×400(mm) 0802 :1430×400×210(mm)

N.W0803:6.2kg 0801:7kg

0804:11.2kg 0802 :28kg

G.W0803:9.0kg 0801:9.0kg

0804:15.2kg 0802 :31kg

Standard Fittings 1Nos*8.5M High Pressure Charge Hose. Universal Inflation Clip.

0801:1Nos* 8.5M High Pressure Charge Hose.

0802 :4Nos* 8.5M High Pressure Charge Hose

Specification:

Features:

Features:




TIRE INFLATOR

WH0805

Features: - Pedal operated inflation device

designed to seat beads and inflate tubeless tires quickly,safely and effortlessly.

- A user-friendly pedal replaces the traditional way of inflation so that the operator can handle the bead seating more comfortable and convenient

- Large capacity(25 liters)air tank. pressure reading unit with 2-scale gauge, inflation and inspection switch button.

Model WH0805

Vehicle Applicable cars,trucks

Working Pressure 116~145 Psi/8~10 Bar/8~10 Mpa

It handle wheels from-to 12”~24”

Tank capacity 25L

N.W 46kg

Dimension 1060×470×400mm

Specification:



TYRE E

QUIPM

ENT SE

RIES

tire&wheel equipment for auto/car/motor-sylvan

Documents

kgworking air pressure

mmworking air pressure

rotary arm

changing tire

mmmaximum tire diameter

internal clamping

pedalpowered inflation

external clamping