tionaids tion - ekta
TRANSCRIPT
Department of Navigation Systems
Cybernetica ASAkadeemia tee 21, 12618 Tallinn, ESTONIA
Phone +372 639 7991Fax +372 639 7992
E-mail ekta @ekta.eeURL: www.ekta.ee
Industrial Member of International Associationof Lighthouse Authorities
2004
AID
Sto
NA
VIG
AT
IO
NA
ID
Sto
NA
VIG
AT
IO
N
Ca
talo
gu
eM
arin
eL
an
tern
s
Estonian National Maritime BoardLighthouse and Hydrographic Department
Lasnamäe 48, Tallinn 11413, ESTONIAPhone +372 620 5600
Fax +372 620 5606E-mail: [email protected]
Refefence customer:
Cybernetica AS has been approvedby Bureau Veritas Quality International
to the quality management system standard:ISO 9000:2000
NOTE: The manufacturer reserves the right to introduce changesto the specifications without prior notification, as necessary.
Vers. 20030415R1
Department of Navigation SystemsCall +372 639 7991Fax +372 639 7992E-mail: [email protected] tee 21, 12618 Tallinn, ESTONIAVisit our website at www.ekta.ee
Cybernetica AS
AIDS to NAVIGATIONAIDS to NAVIGATION Buoy light E821
Features
The smart buoy light E821 is a local control system of a buoy consisting of one or twoLED-based light source, a built-in solid state flasher, a GPS receiver and a GSMcommunication controller. The light can be integrated into a remote control andmonitoring system and be used in sea buoys, pier lights, or on various moving vessels.The E821 lights are currently available in one of five colours: red, green, white, yellow orblue. The assembly consists of a light unit with a shock proof acryllic lens for thefocussing of the light beam, and of marine grade aluminium enclosure with a flange formounting of the light, and cable plugs. The flanges are available in two versions makingthe lights usable in different buoys (see Technical Specification 2). The GPS and GSMantennas are located on the top of the light. In order to protect the lights againstmechanical shocks and harsh environmental conditions the lights should be installedunder a polycarbonate cupola.
·the solid state flasher of the system is built using aprogrammable microcontroller performing the control offlashing of the light in accordance with the pre-configuredlight patterns, and daylight switching ON and OFF offlashing by the light-sensor
communication with the remote control and monitoringsystem (centre) via public switched or GSM900 mobiletelephone network. Exchange of SMS messages with thecentre
setting of the time schedule of communications andresponding to the inquiries
remote configuration by the commands of the center
protection against unauthorized inquiries and commands
checking the correspondence of the geographicalcoordinates of the light to the pre-configured values andsending warning messages to the center in case ofunacceptable deviation
programmable scheduling of mobile phone standby modein order to save energy
acorrection of the built-in clock based on the GPS signals
E821
Technical specifications
Buoy Light E821AIDS to NAVIGATION
Edition: May 2004
IEC 60825-1:1993+A1:1997+A2:2001
EMITTED WAVELENGTHS 400 TO 700 nmMAXIMUM OUTPUT OF LED RADIATION: 2 mW
CLASS 2M LED PRODUCT
Layout and dimensions of buoy light E821
Parameeter Red Green White Yellow Blue
Typical wavelength or
radiation temperature625 nm 505 nm 5500° K 590 nm 470 nm
Light intensity of one light
source cd, vertical divergence
2�1/2 =5°
100 105 80 60 30
Light intensity of one light
source cd, vertical divergence
2�1/2 =10°
65 67 54 40 20
Light intensity of one light
source cd, vertical divergence
2�1/2 =20°
35 36 28 22 10
Voltage rangefrom 9 up to 30 V DC using primary or accumulator
batteries
Power consumption in flash 4.5 W per one light source
Built-in flasher programmable by the customer
Flash length (programmable) any multiples of 10 ms up to 60.01 s
Period time (programmable) any multiples of 20 ms up to 655.35 s
Ambient air temperaturefrom -30°C up to +55°C, for the communication controller
from –20° up to +45° (IEC 60068-2-1, IEC 60068-2-2)
Relative humidity up to 95% at temperature +35°C (IEC 60068-2-3)
Mechanical vibration 10 - 100Hz with acceleration up to 2,2g (IEC 60068-2-6)
Repeated mechanical shocks up to 10 g (IEC 60068-2-27)
Maximal rolling and inclination ± 45°
Ingress protection class IP 67 (IEC 60529)
Operation in salt mist
conditionsallowed (IEC 60068-2-52)
When requesting quotations, please specify
your number of light sources and color
requirements using the legend below:
E821N.CColour: R, G, W, Y, BNumber of light sources: 1 or 2
Product Family
E821
Technical specifications 2
LED Buoy Light family E821AIDS to NAVIGATION
Edition: May 2004
Layout and fixing dimensions of the flange 820.041
Layout and fixing dimensions of the flange 820.042
Department of Navigation SystemsCall +372 639 7991Fax +372 639 7992E-mail: [email protected] tee 21, 12618 Tallinn, ESTONIAVisit our website at www.ekta.ee
Cybernetica AS
AIDS to NAVIGATIONAIDS to NAVIGATION LED Buoy LightsFamily E822
The Buoy Lights of the family E822 utilize high-efficient LED technology to provideomnidirectional flashing light beam to be used as in sea buoys as well on shore. The lightsconsist of one or two LED based light sources, of a built-in flasher, and of marine gradealuminum enclosure with a flange and cable plugs. The flanges are available in two versionsmaking the lights usable in different buoys (see Technical Specification 2). The lights arecurrently available in one of the five colours: red, green, white, yellow, or blue.Under the flange a telecommunication controller with GPS receiver can be installed, theantenna of which will be fixed on the top of the light. Using this additional equipment thelights can be integrated into a remote control and monitoring system.In order to protect the lights against mechanical shocks and harsh environmental conditionsthe lights installed under a polycarbonate cupola. The visibility range of the lanternsdepending on the colour is from 2.6 up to 3.6 nm when using one light source, and from 3.3 upto 4.9 nm when using two light sources.
Features
the solid state built-in flasher of the system using aprogrammable microcontroller performing the control offlashing in accordance with the pre-configured lightpatterns, and daylight switching ON and OFF offlashing by the light sensor
when equipped with communication controller and GPSreceiver, a number of additional features will beavailable:
communication with the remote control and monitoringsystem using GSM900 mobile telephone network.
setting of the time schedule of communications andresponding to the inquiries
executing of the commands received from the centre, and correcting of the built-in clock bythe GPS signals
checking the correspondence of the geographical coordinates of the light to the pre-configuredvalues and sending warning messages to the centre in case of unacceptable deviation
programmable scheduling of mobile phone standby mode in order to save energy
E822
Technical specifications 1
LED Buoy Light family E822AIDS to NAVIGATION
Edition: May 2004
IEC 60825-1:1993+A1:1997+A2:2001
EMITTED WAVELENGTHS 400 TO 700 nmMAXIMUM OUTPUT OF LED RADIATION: 2 mW CLASS 2M LED PRODUCT
Parameeter Red Green White Yellow Blue
Typical wavelength or
radiation temperature625nm 505nm 5500°K 590nm 470nm
Light intensity of one light
source cd, vertical divergence
2�1/2 =5°
100 105 80 60 30
Light intensity of one light
source cd, vertical divergence
2�1/2 =10°
65 67 54 40 20
Light intensity of one light
source cd, vertical divergence
2�1/2 =20°
35 36 28 22 10
Voltage range from 6 V up to 30 V DC
Power consumption in flash 4.5 W per one light source
Built-in flasher programmable by the customer
Flash length (programmable) any multiples of 10 ms up to 60.01 s
Period time (programmable) any multiples of 20 ms up to 655.35 s
Ambient air temperature
from -30°C up to +55°C, for the communication
controller -20°C up to +45°C
(IEC 60068-2-1, IEC 60068-2-2)
Relative humidity up to 98% at temperature +35°C (IEC 60068-2-3)
Mechanical vibration10 - 500Hz with acceleration up to 2,2g
(IEC 60068-2-6)
Repeated mechanical shocks with acceleration up to 10 g (IEC 60068-2-27)
Maximal rolling and inclination ± 45°
Direct contact with
precipitation, sea water, and ice
not allowed
When requesting quotations, please specify your number of light sources and color requirementsusing the legend below:
E822N.CColour: R, G, W, Y, BNumber of light sources: 1 or 2
Product Family
E822
Technical specifications 2
LED Buoy Light family E822AIDS to NAVIGATION
Edition: May 2004
Layout and fixing dimensions of the flange 820.041
Layout and fixing dimensions of the flange 820.042
Department of Navigation SystemsCall +372 639 7991Fax +372 639 7992E-mail: [email protected] tee 21, 12618 Tallinn, ESTONIAVisit our website at www.ekta.ee
Cybernetica AS
AIDS to NAVIGATIONAIDS to NAVIGATIONOmnidirectional
LED Lights Family E825
The Omnidirectional Lights of the family E825 utilize highly efficient LED technology toprovide omnidirectional flashing or steady light beam for use in coastal applications, as wellas on various moving vessels. The lights consist of one to five LED based omnidirectionallight sources with lenses, of a built-in solid state flasher, and of a marine grade aluminum casewith a flange and cable plugs. Three customer-selectable lense types with different opticalproperties can be used for light beam formation to provide a required vertical divergence of5, 10, or 20 degrees. The lights are currently available in one of the five colours: red, green,white, yellow, or blue.
utilizing highly efficient LED technologyguaranteering long lifetime and high reliability ofthe lights
the solid state built-in flasher of the system isbased on a programmable microcontroller,providing the control of flashing in accordancewith the pre-configured flashing patterns, andlight sensor controlled switching ON and OFF
by ordering E825 lights with lenses of variousoptical properties, the customer can select themost suitable vertical divergence, andconsequently, the visibility range
Features
E825
Technical specifications
OmnidirectionalLED Lights Family E825AIDS to NAVIGATION
Edition: May 2004
IEC 60825-1:1993+A1:1997+A2:2001
EMITTED WAVELENGTHS 400 TO 700 nmMAXIMUM OUTPUT OF LED RADIATION: 2 mW
When requesting quotations, please specify your number of light sources and color requirementsusing the legend below:
Parameeter Red Green White Yellow Blue
Typical wavelength or
radiation temperature625nm 505nm 5500°K 590nm 470nm
Light intensity of one light
source, vertical divergence
2�1/2 =5°
100 105 80 60 30
Light intensity of one light
source, vertical divergence
2�1/2 =10°
65 67 54 40 20
Light intensity of one light
source, vertical divergence
2�1/2 =20°
35 36 28 22 10
Voltage range from 6 V up to 30 V DC
Power consumption in flash 4.5 W per one light source
Built-in flasher programmable by the customer (using a computer)
Flash length (programmable) any multiples of 10 ms up to 60.01 s
Period time (programmable) any multiples of 20 ms up to 655.35 s
Ambient air temperaturefrom -30°C up to +55°C (IEC 60068-2-1,
EC 60068-2-2)
Relative humidity up to 98% at temperature +35°C (IEC 60068-2-3)
Mechanical vibration10 - 500Hz with acceleration up to 2,2g
(IEC 60945 section 8.7)
Repeated mechanical shocks with acceleration up to 10 g (IEC 60068-2-27)
Operation in salt mist
conditions
allowed (IEC 60068-2-52)
Ingress protection class IP 67 (IEC 60529)
E825N.CColour: R, G, W, Y, B
Number of light sources: from 1 up to 5
Product Family
CLASS 2M LED PRODUCT
Layout and dimensions of the Pier Light E825
Department of Navigation SystemsCall +372 639 7991Fax +372 639 7992E-mail: [email protected] tee 21, 12618 Tallinn, ESTONIAVisit our website at www.ekta.ee
Cybernetica AS
AIDS to NAVIGATIONAIDS to NAVIGATION LED Lightfor Harbours E8271
Preliminary specifications
Originally intended as omnidirectionalpier light for harbours, this LED lightwill be offered in following configurations:
Option 1: light unit onlyOption 2: with flasherOption 3: with flasher
and GSM monitoring
Low power consumption makes theE8271 light unit particularly suitablein locations powered by solar panels.
light unitlight unit
Parameter Value
Luminous intensity 20 to 60 cd
Vertical divergence 2�1/2 5 to 12 degrees
Voltage range 10 to 30 V DC
Power consumption 1 W to 6 W
Height 150 mm to 1000 mm, to be
specified by the customer
Rod diameter from 40 mm up to 80 mm
This cost-effective yet adequate solution for many signalling applicationswill be available for ordering starting from April 2004.
Department of Navigation Systems EKTACall +372 639 7991Fax +372 639 7992E-mail: [email protected] tee 21, 12618 Tallinn, ESTONIAVisit our website at www.ekta.ee
Cybernetica AS
AIDS to NAVIGATIONAIDS to NAVIGATION LED Range LightsE8511, E8512
Features
The E8511 and E8512 Range Lights utilize LED technology to provide narrow highintensity light beam, controlled by a built-in flasher. They consist of marine gradealuminium case, hot zinc coated base plate and polycarbonate light unit housing for theLED matrix, flasher unit and power supply. The light unit is protected to IP67 and,furnished with a silica gel humidity absorber package.The light E8512 differs from the light E8511 by being without steel base plate. Thislight will be fixed to the host structure by a bent fringe. The lights can be installed onsite without any additional cupola. The direction of the light beam is adjustable 12degrees around both vertical and horizontal axes using a detachable sight.
high intensity (up to 2000 cd) narrow light beam,adjustable around vertical and horizontal axes
programmable automatic control of flashing
daylight-dependent control of the flashing mode byan internal photosensor
readiness for connection to RS-485 local area net-work (optionally RS-232 interface is available)
when equipped with an optional GSMcommunication controller, the light can beintegrated into a remote control and monitoringsystem
when a group of lanterns is equipped withoptional GPS receivers, the flashing of thisgroup of lanterns can be synchronized withoutphysical (cable) connection between the units
E8511_12
Technical specifications 1
LED Range Lanterns E8511 and E8512AIDS to NAVIGATION
Edition: April 2004
IEC 60825-1:1993+A1:1997+A2:2001
EMITTED WAVELENGTHS 400 TO 700 nmMAXIMUM OUTPUT OF LED RADIATION: 60 mW
CLASS 2M LED PRODUCT
Colour Red Yellow Green Blue White
E8511.R E8511.Y E8511.G E8511.B E8511.WType
E8512.R E8512.Y E8512.G E8512.B E8512.W
Parameter Minimal Typical Maximal
Wavelenght of red light 612 nm 625 nm 645 nm
Wavelenght of yellow light 587 nm 590 nm 597 nm
Wavelenght of green light 490 nm 505 nm 520 nm
Wavelenght of blue light 460 nm 470 nm 480 nm
Radiation temperature of white
light
4500°K 5500°K 8000° K
Light intensity of red light* 800 cd 1200 cd 2000 cd
Light intensity of yellow light* 500 cd 1000 cd 1200 cd
Light intensity of green light* 800 cd 1200 cd 2000 cd
Light intensity of blue light* 250 cd 300 cd 400 cd
Light intensity of white light* 800 cd 1200 cd 2000 cd
Horisontal divergence ����� 10°
Horisontal divergence ������ 20°
Vertikal divergence ����� 10°
Voltage range from 10 V up to 16 V DC
Power consumption in flash <10W
Built-in flasher programmable by the customer
Flash length (programmable) any multiples of 10 ms up to 60.01 s
Period time (programmable) any multiples of 20 ms up to 655.35 s
Ambient air temperature from -30ºC up to +55ºC (IEC 60068-2-1,
IEC 60068-2-2)
Relative humidity up to 98% at temperature +35°C (IEC-60068-2-30)
Mechanical vibration 10 - 500Hz, with acceleration up to 2,2g
(IEC 60068-2-3)
Operation in conditions of salt
mist
allowed (IEC 60068-2-52)
Allowed wind speed up to180 km/h (100 knots)
Ingress protection class IP 67 (IEC 60529)
Mechanical impact resistance of
the front cover
IK09 (EN 50102)
Dimensions (W, H, D) 154 x 248 x 250 mm
Weigth 4.2 kg*) at the temperature +20°C
Marking of the lights
E8511_12
Technical specifications 2
LED Range Lanterns E8511 and E8512AIDS to NAVIGATION
Edition: April 2004
Layout and dimensions of the Range Lantern E8511
Layout and dimensions of the Range Lantern E8512
Department of Navigation SystemsCall +372 639 7991Fax +372 639 7992E-mail: [email protected] tee 21, 12618 Tallinn, ESTONIAVisit our website at www.ekta.ee
Cybernetica AS
AIDS to NAVIGATIONAIDS to NAVIGATION LED Range LightE8551
Features
The Range Light E8551 utilize high-efficient LED technology to provide narrow high
intensity light beam guaranteeing the visibility range up to 14 nautical miles at nighttime.The light consists of a light unit and, of marine grade aluminium case. The light unitconsists of transparent polycarbonate front cover and of anodized back cover which isused also for dissipation of the heat. The lights are currently available in one of the threecolours: red, green, or white.On the site of installation the light will be fixed by a hot zinc coated base plate. Thedirection of the light beam around horizontal axis is adjustable by rotation of the casewith the light unit. Around vertical axis the direction of the light beam is adjustable bydeflection of the light unit.
designed using revolutionary, energy efficient
and ultra compact Luxeon STAR solid statelight sources, combining the lifetime andreliability advantages of Light Emitting Diodes
high intensity (up to 9,000 cd) narrow light beam,adjustable around vertical and horizontal axes
external control of flashing using a flasher of anyavailable type
TM
the light unit consists of two groups of LEDS with autonomous power supply and control.This allows to:
use one group of LEDs as a standby (secondary) lantern;operate at only half light intensity when necessary;improve the reliability of the lantern - when one group becomes faulty, anotherone will continue to operate.
New versions of the lantern are under the development, featuring flasher, GSMcommunication controller and GPS receiver, allowing to integrate the lantern into remotemonitoring and control system, and to synchronize the flashing of a group of lanterns bythe GPS time signals.
Note: STAR is a registered trademark of Lumileds Lighting, LCCTM
E8551
Technical specifications
LED Range Light E8551AIDS to NAVIGATION
Edition: April 2004
Layout and dimensions of the Range Light E8551
IEC 60825-1:1993+A1:1997+A2:2001
EMITTED WAVELENGTHS 400 TO 700 nmMAXIMUM OUTPUT OF LED RADIATION: 40 mW
Parameter Minimal Typical Maximal
Wavelength of red light 612 nm 625 nm 645 nm
Wavelength of green light 490 nm 505 nm 520 nm
Radiation temperature of white
light
4500 K 5500 K 8000 K
Light intensity of red light 4000 cd 9000 cd
Light intensity of green light 4000 cd 9000 cd
Light intensity of white light 4000 cd 9000 cd
Horizontal divergence 2�1/2 10°
Horizontal divergence 2�1/10 22°
Vertical divergence 2�1/2 10°
DC voltage range 10 V 12 V 30 V
Power consumption in flash 24 W
Ambient air temperature from -30ºC upto +55ºC (IEC 60068-2-1,2)
Relative humidity up to 98% at temperature +30ºC (IEC 60068-2-3)
Operation in conditions of salty
sea fog
allowed (IEC 60068-2-11)
Mechanical vibration 10 – 500 Hz with acceleration up to 2.2 g
(IEC 60068-2-6)
Allowed wind speed up to 140 km/h
Ingress protection IP 67 (IEC 60529)
Mechanical impact resistance
of the front cover 10J
IK09 (EN 50102)
4 holes d=14
Department of Navigation Systems EKTACall +372 639 7991Fax +372 639 7992E-mail: [email protected] tee 21, 12618 Tallinn, ESTONIAVisit our website at www.ekta.ee
Cybernetica AS
AIDS to NAVIGATIONAIDS to NAVIGATION LED RangeLight E8552
Features
The Range Light E8552 utilizes highly efficient LED technology to provide a narrowhigh intensity light beam guaranteeing nighttime visibility range of up to 14 nauticalmiles. The light consists of an inner light unit box with a transparent polycarbonatefront cover and anodized back cover, housed inside a powder painted outer metalenclosure with hot zink coated base plate and adjustment facility. Optical and electronicdevices: LEDs, custom lenses, and a controllable power supply unit - are protected fromthe environmental influence to IP67. The E8552 lights are currently available in one ofthe three colours: red, green, or white.
At the installation site, the light will be fixed to the host structure by the base plate.Direction of the light beam around the horizontal axis can be adjusted by rotation of theenclosure with the light unit. Direction of the light beam in vertical plane is adjusted bydeflection of the light unit within the outer enclosure. For the precise adjustment of thelight beam, an optional optical sight mounted to the upper backside of the light can beused.
Designed using Luxeon's revolutionary, energy efficient and
compact new Lumiled STAR light sources, combining thelifetime and reliability advantages of Light Emitting Diodeswith optical lenses designed at Cybernetica
High intensity (up to 18,000 cd) narrow light beam, fieldadjustable around vertical and horizontal axes
External control of flashing using a flasher of any availabletype
In order to extend the visibility area at short distances, weoffer range light versions with extended light beam formed bytwo or three additional wide angle light sources (seespecification B). This is a new feature, enabled byimplementation of LED technology
TM
Note: STAR is a registered tradem ark of Lumileds Lighting,, LCCTM
E8552
Technical specifications
Range Light E8552LEDAIDS to NAVIGATION
Edition: April 2004
Layout and dimensions of the Range Light E8552
IEC 60825-1:1993+A1:1997+A2:2001
EMITTED WAVELENGTHS 400 TO 700 nmMAXIMUM OUTPUT OF LED RADIATION: 300 mW
Parameter Minimal Typical MaximalWavelenght of red light 612 nm 625 nm 645 nm
Wavelenght of green light 490 nm 505 nm 520 nm
Radiation temperature of white
light4500 K 5500 K 8000 K
Light intensity of red light 18 000 cd 20 000 cd 22 000 cd
Light intensity of green light 16 000 cd 18 000 cd 20 000 cd
Light intensity of white light 14 000 cd 16 000 cd 17 500 cd
Horizontal divergence 2� 1/2 2.5 deg 3 deg
Horizontal divergence 2� 1/1 0 4.5 deg 6 deg
Vertical divergence 2� 1/2 2.5 deg 3 deg
Voltage range from 10 up to 30 V DC
Power consumption in flash 16 W
Ambient air temperature from -30ºC up to +55ºC (IEC 60068-2-1,2)
Relative humidity up to 98% at temperature +30ºC (IEC 60068-2-30)
Operation in conditions of saltmist
allowed (IEC 60068-2-52)
Mechanical vibraton 10 – 500 Hz with acceleration up to 2.2 g
(IEC 60945-8,7)
Allowed wind speed up to 180 km/h (100 knots)
Ingress protection class IP 67 (IEC 60529)
Mechanical impact resistance of
the front cover
IK09 (EN 50102)
UV radiation tolerance IEC 60060-2-5
CLASS 3R LED PRODUCT
New!
Specification B
Range Light E8552LEDAIDS to NAVIGATION
E8552
Option 1: extended beam version
Option 2: extended beam version
Option 3: extended beam version
Lights with standard and extended beams(6 deg sector shown with dotted line)
Standard beam
When asking for price quotation, specify your
requirement for near field visibility (angle and range).
Visibility area at the atmospherictransparency T = 0.74 on theoutside border of whichthe luminance of the light
beam on the retina of human eyeis equal to or greater than 0.2 micro lux.(visibility criteria according toIALA Recommendation E112)
Department of Navigation SystemsCall +372 639 7991Fax +372 639 7992E-mail: [email protected] tee 21, 12618 Tallinn, ESTONIAVisit our website at www.ekta.ee
Cybernetica AS
AIDS to NAVIGATIONAIDS to NAVIGATION LED Range LightE8553
Features
The Range Lights E8553 utilize highly efficient LED technology to provide narrow highintensity light beam for application in range lights. The light is controllable by anexternal flasher, and it consists of a light unit, and of a marine grade aluminumenclosure. The light unit is mounted on a black heat dissipation radiator of marine gradealuminum, and it is covered with a transparent front cover. In the light unit there aremounted powerful LEDs with individual lenses, and a controllable power supply unit.The lights are currently available in one of the three colors: red, green, or white. On thesite of installation the light will be mounted by a hot zinc coated base plate. The directionof the light beam around horizontal axis is adjustable by rotation of the case with thelight unit. Around vertical axis the direction of the light beam is adjustable by deflectionof the light unit. For more accurate direction of the light beam an optical sight can beused.
Designed using revolutionary, energy efficient and ultra compact Luxeon STAR solid statelight sources, combining the lifetime and reliability advantages of Light Emitting Diodes
high intensity (up to 32 000 cd) light beam, adjustable around vertical and horizontal axes
external control of flashing using a flasher of any available type
new versions of the lantern featuring a built-in flasher and a light sensor are currently underthe development
TM
Note: STAR is a registered trademark of Lumileds Lighting, LLCTM
Layout and dimensions of the Range Lught E8553
220 *
256 *
25
6*
30
*
244 *
6* 4xØ14 *
330 *
215 *
220 *
140 *90 *
E8553
Technical specifications
Range Light E8553LEDAIDS to NAVIGATION
Edition: May 2004
IEC 60825-1:1993+A1:1997+A2:2001
EMITTED WAVELENGTHS 400 TO 700 nmMAXIMUM OUTPUT OF LED RADIATION: 300 mW
CLASS 3R LED PRODUCT
Parameter Minimal Typical Maximal
Wavelength of red light 612 nm 625 nm 645 nm
Wavelength of green light 490 nm 505 nm 520 nm
Radiation temperature of white
light
4500 K 5500 K 8000 K
Light intensity of red light 24 000 cd 32 000 cd
Light intensity of green light 20 000 cd 26 000 cd
Light intensity of white light 18 000 cd 24 000 cd
Horizontal divergence 2�1/2 3° 3.5° 4°
Horizontal divergence 2�1/10 8° 10°
Vertical divergence 2�1/2 3° 3.5°
DC voltage range 10 V 12 V 30 V
Power consumption in flash 20 W
Ambient air temperature from -30ºC upto +55ºC (IEC 60068-2-1,
IEC 60068-2-2)
Relative humidity up to 98% at temperature +30ºC (IEC 60068-2-3)
Operation in salt mist
conditions
allowed (IEC 60068-2-11)
Mechanical vibration 10 – 500 Hz with acceleration up to 2.2 g
(IEC 60068-2-6)
Allowed wind speed up to 180 km/h
Ingress protection IP 67 (IEC 60529)
Mechanical impact resistance
of the front cover 10J
IK09 (EN 50102)
When requesting quotations, please specify your number of light sources and color
requirements using the legend below:
E8553.CColour: R, G, W, Y, B
Product Family
Department of Navigation SystemsCall +372 639 7991Fax +372 639 7992E-mail: [email protected] tee 21, 12618 Tallinn, ESTONIAVisit our website at www.ekta.ee
Cybernetica AS
AIDS to NAVIGATIONAIDS to NAVIGATION LED SectorRange Light E8591
Features
The LED Sector Range Light E8591 utilize high-efficient LED technology to providenarrow high intensity 3-colour sectored light beam guaranteeing the visibility range up to10 nautical miles at night time. The lantern consists of a light unit and of marine gradealuminium case. The light unit consists of transparent polycarbonate front cover and ofanodized base board which is used for dissipation of the heat.
On the site of installation the lantern will be fixed by a hot zinc coated base plate. Thedirection of the light beam around the horizontal axis is adjustable by rotation of the casewith the light unit. Around vertical axis the direction of the light beam is adjustable bydeflection of the light unit.
designed using Luxeon's revolutionary, energyefficient and ultra compact new
STAR light source, combining the lifetimeand reliability advantages of Light EmittingDiodes
high intensity (up to 2000 cd) narrow 3-coloursectored light beam, adjustable around verticaland horizontal axes
control of flashing using internal or externalflasher of any available type
TM
it is possible to implement different flashing pattern for the lightbeams of different colours
E8591
E8591
Technical specifications
Sector Light E8591AIDS to NAVIGATION
Edition: February 2004
*) The width of a sector can be specified by the customer
IEC 60825-1:1993+A1:1997+A2:2001
EMITTED WAVELENGTHS 400 TO 700 nmMAXIMUM OUTPUT OF LED RADIATION: 300 mW
Parameter Minimal Typical Maximal
Wavelenght of red light 612 nm 625 nm 645 nm
Wavelenght of green light 490 nm 505 nm 520 nm
Radiation temperature of
white light
4500 K 5500 K 8000 K
Light intensity of all sectors 1800 cd 2000 cd 2900 cd
Width of the red sector* 1.5 deg
Width of the green sector* 1.5 deg
Width of the white sector* 1.9 deg
Boundary resolution 2 angular minutes
Vertical divergence from +1.25 up to - 2.25 deg
Control of flashing by internal flasher or by external flasher of any type
Voltage range from 10 up to 30 V DC
Power consumption in flash 14 W
Ambient air temperature from -30C upto +55C (IEC 60068-2-1 IEC 60068-2)
Relative humidity up to 98% at temperature +30C (IEC 60068-2-30)
Operation in salt mist
conditions
allowed (IEC 60068-2-52)
Mechanical vibraton10 – 500 Hz with acceleration up to 2.2 g
(IEC 60945-8,7)
Allowed wind speed up to 140 km/h
Ingress protection IP 68 (IEC 60529)
UV radiation tolerance IEC 60060-2-5
Layout and dimensions of the Sector Light E8591
CLASS 3R LED PRODUCT
AIDS to NAVIGATIONAIDS to NAVIGATIONLED Stripe Lanterns
Family E891
Technical specifications
Stripe lanterns family E891 utilize LED high-efficient technology to provide stripeshaped light pattern for long-term operation in land-based aids to navigation. The LEDs ofthe lanterns are imbedded into a hermetic plastic tube and, the lanterns will be deliveredin three versions with red, green and, white light. The normal position of the lanterns isvertical, being fixed on a horizontal base plate. When using in other position the top ofthe lanterns must also be fixed with ±2 mm free space in order to avoid thermal stresses ofthe tube.Remote control is used for switching ON and OFF of the lanterns and the properoperation of them is indicated by a diagnostic signal.
Department of Navigation Systems EKTACall +372 639 7991Fax +372 639 7992E-mail: [email protected] tee 21, 12618 Tallinn, ESTONIAVisit our website at www.ekta.ee
Cybernetica AS
Parameter Minimum Nominal Maximum
Stripe lantern E8911, red
light intensity
horizontal divergence 2�1/2
12 cd
90º
Stripe lantern E8913, green
light intensity
horizontal divergence ���/2
12 cd
90º
Stripe lantern E8914, white
light intensity
horizontal divergence 2�1/2
166 cd20º
DC voltage range 10 V 12 V 16 V
Current consumption 340 mA 360m A 380 mA
Control signal voltage on input 2 when
switching ON
0 V 3 V
Control signal voltage on input 2 when
switching OFF
4 V 5 V
Voltage on the diagnostics output when
in order
1V
Output resistance of the diagnostics
signal99 k� 100 k� 101 k�
Weight 920 g 960 g 1000 g
Height 720 mm
Diameter 61 mm
Temperature of ambient air from -30ºC up to +55ºC (IEC 60068-2-1,
IEC 60068-2-2, IEC 60068-2-14)
Relative humidity at temperature +35ºC up to 98% (IEC 60068-2-3)
Operation in conditions of salty sea fog allowed (IEC 60068-2-11)
Mechanical vibration 10 – 500 Hz with acceleration up to 2,2g
(IEC 60068-2-6)
Ingress protection IP67
E891
AIDS to NAVIGATION
Specifications
LED Stripe Lanterns Family
Edited: April 2003