tilt coupler - wedgelock attachments | superior in … tilt coupler brochure.pdfhealc powertilt...
TRANSCRIPT
Wedgelock Equipment Limited • 72 Montgomery Crescent, Upper Hutt 5018, NEW ZEALAND
NZ 0800 424 482 • AUS 1800 731 757 • [email protected] • www.wedgelock.com
Tilt Coupler
UP TO 180º
with
from
The I-LOCKTILT COUPLERfor excavatorsThe world’s only dual locking coupler that offers TOTAL SAFETY in LESS THAN A SECOND!
by
For excavators up to 20T
Patents apply.For details, see our website.
Wedgelock Weight Class
Excavator Machine Weight
Part Number Weight (est)Coupler Base Pin Centres (min/max)
Base Width Pin Ø WLL (Lifting Eye) Tilt Angle
Tonnes kgs mm mm mm kgs Deg
028 2.3-2.8T CT2-028 95 165 / 220 121 35 / 40 2000 180
037 2.9-3.7T CT2-037 97 165 / 220 121 35 / 40 2000 180
045-055 3.6-5.5T CT2-045-055 147 218 / 270 144 45 / 50 2000 180
070 5.6-7.0T CT2-070 194 290 / 312 165 45 / 50 4000 180
130 10.0-13.0T CT2-130 345 355 / 420 218 60 / 65 8000 120
170 14.0-17.0T CT2-170-70 525 400 / 465 280 70 8000 120
170 14.0-17.0T CT2-170-80 550 390 / 435 300 80 8000 120
210 18.0-21.0T CT2-210 550 430 / 485 300 80 8000 120
HEALC PowerTilt Rotary Actuator Circuit Pressure Range - 250-260 Bar (applies to all models)
*I-Lock Tilt Coupler models from 028 to 210 are designed with multi-model capability. This will enable the operator to connect to an array of attachments in the same weight class. Compatibility is subject to attachment design and specification. For further information please refer to C2 specification sheets 900-* or contact your nearest Wedgelock Dealer.Complies with the following standards/position papers: AS4772-2008, EN474, NSW WorkCover Position Paper for Quick Hitches, NZ WorkSafe Best Practices 5.10.3Specifications are subject to change without notice. All images used are representative only and may differ from actual product.
I-Lock Tilt Coupler Range
930-
000-
4 R-
0
Tilt Couplerfrom
www.wedgelock.com
INSTANT SAfeTy KNucKleAutomatically secures the attachment to the coupler the instant the front jaw comes into contact with the first pin. The instant locking eliminates the risk of losing control of the attachment during the “high risk” latching phase. This extremely important safety feature is unique to I-Lock.
PrImAry WedgeThe engagement system incorporates the proven “Wedge Locking Principle” for the primary wedge, increasing the locking integrity ensuring both attachment pins remain locked and secure.
cHecK VAlVeIntegrated within the primary cylinder the check valve prevents disengagement of the wedge in the event of reduction or loss of the engagement force.
AudIble WArNINg buzzer
Variable tones controlled by the ICS deliver a clear signal assisting the operator throughout the attachment change.
TWO lINe cIrcuIT (fOr THe cOuPler)The built-in ICS (I-Lock Control System) enables enhanced functionality of the I-Lock Tilt Coupler, retaining the Instant Locking with a single switch and two hydraulic lines.
TIlT TecHNOlOgyWorld renowned POWERTILT from Helac. Enhancing productivity through better precision and control.
TIme-OuT fuNcTIONThe ICS automatically resets the Instant Safety Knuckle to the locked position, placing the coupler into safe mode.
mulTI mOdel™Enables operators to connect to an array of attachments within the same weight class.
The I-Lock Tilt Coupler with ICS delivers maximum safety without compromise: