ticket eater_user manual 2006
TRANSCRIPT
-
8/12/2019 Ticket Eater_User Manual 2006
1/24
1
Firmware V.2.0-2.011
MOD. MT6
-
8/12/2019 Ticket Eater_User Manual 2006
2/24
2
SUMMARY:
DESCRIPTION .................................................................................................................................. 3
TECHNICAL CHARACTERISTICS ......................................................................................................... 3
DIMENSIONS AND WEIGHT: ............................................................................................................... 3
INSTALLATION ............................................................................................................................... 4
POSITIONINGAND PRECAUTIONS ............................................................................................ 4
CONFIGURATION ........................................................................................................................... 4
CONFIGURATIONTABLEOFTHEDIP_SWITCH .................................................................... 4
GENERALRULESFORTHECONFIGURATION ....................................................................... 5
HISTORICALDATAPRINTING................................................................................................... 5
CLOCKREGULATION.................................................................................................................. 6
SERIALNUMBEROFTHERECEIPTSANDTOTALCOUNTEROFTHETICKETSCLEAR
UP..................................................................................................................................................... 6REGULATIONOFTHEBEGINNING/ENDINGDATEOFTHEOPERATION ......................... 7
MACHINECODESETUP ............................................................................................................. 7
LENGHTOFTHETICKETSCALIBRATION .............................................................................. 8
PCCONNECTIONSETUP ............................................................................................................ 8
MINIMUMNUMBEROFTICKETSFORPRINTINGSETUP .................................................... 8
MEMORANDUMRECEIPTACTIVATION ................................................................................. 9
BARCODELEARNINGANDCANCELLATION ........................................................................ 9
MAXIMUMNUMBEROFBARCODEERRORSSETUP ......................................................... 10
BARCODEACTIVATION(SENSOR MOD.ELC0504/A ONLY) .................................................... 10
FULLSACKSENSORACTIVATION......................................................................................... 10
CHOICEOFTHEINSTALLEDCARDREADER ....................................................................... 11
INITIALIZATIONOFTHEINSTALLEDCARDREADER ....................................................... 11
FUNCTIONING ............................................................................................................................... 12
TICKETSCOUNTING.................................................................................................................. 12
MAINTENANCE ............................................................................................................................. 13
REPLACINGTHESACK ............................................................................................................. 13
REPLACINGTHEPAPERFORTHEPRINTER ......................................................................... 13
ELIMINATINGPAPERBLOCKAGES ....................................................................................... 13
CLEANINGTHEDRAGGINGANDCUTTINGGROUP .......................................................... 14
SENSIBILITYREGULATION ..................................................................................................... 14
PROBLEMSANDSOLUTIONS .................................................................................................. 16
SCHEMES ........................................................................................................................................ 18
SCHEMEOFTHECABLES ......................................................................................................... 18
SCHEMEOFTHECONNECTORSANDCARDLAYOUT ....................................................... 19
DECLARATION OF CONFORMITY ............................................................. 21
-
8/12/2019 Ticket Eater_User Manual 2006
3/24
3
Description
The Mangia Tickets mod. MT6 is an automatic machine for counting anddestroying tickets. It is user friendly, and has a big display that shows thecounted tickets.If connected to a computer, through theWinMt software it allows thecomplete automatic management of the PRIZES OPERATIONS.The printer inside allows to print personalized receipts, with logos and noticesas the Operator wants.
Technical Characteristics
Feeding tension: 230 Vca~50HzAbsorption: 250WCounting speed: ~ 580 tickets/min.Sack capacity: ~ 40.000 ticketsPrinter: Custom TPTCM60
Thermic with auto-cutter and automatic expulsion~ 1.100 receipts with standard 90mm roll
~ 2.400 receipts with 130mm (kit XSP) rollBadge reader: Uniform Ind.
3 tracks ISO LO.CO.Display: 4 digits 7 segments
Height of the digit: 58 mmPc interface: Serial Rs232, 9600 bps
Mechanic group: Monophase motor 220 Vac/0.6AReductor in oil bathHelicoidal self-sharpening blades
Dimensions and weight:
Height: 150 cm (176 cm with heading)Width: 50 cmDepth: 40 cmWeight (with empty sack): 30 Kg
-
8/12/2019 Ticket Eater_User Manual 2006
4/24
4
INSTALLATION
POSITIONING and PRECAUTIONS
The machine is to be used in inside places. Place it on a flat surface and farfrom sources of excessive heat, avoid humid places, make sure that theconnection to the earth is efficient. Any possible upkeeping oerations, exceptfrom the changing of the sack, are to be done by the competent personnel,following the safe-proof rules.
CONFIGURATION
CONFIGURATION TABLE OF THE DIP_SWITCH
Function Sw1 Sw2 Sw3 Sw4
Normal functioning On On On On
Printing of the historical Off On On On
Clock regulation On Off On On
Serial number and total counter clear up Off Off On On
Regulation of the Beginning date of the Operation On On Off On
Regulation of the Ending date of the Operation Off On Off On
Clearing of the historical On Off Off On
Machine Code set up Off Off Off On
Lenght of the tickets calibration On On On Off
PC connection set up Off On On Off
Minimum number of tickets for printing set up On Off On Off
Memorandum receipt activation Off Off On Off
Barcode learning On On Off Off
Full sack sensor activation Off On Off Off
Choice of the installed card reader On Off Off Off
Maximum number of barcode errors set up Off Off Off Off
Function Sw5 Sw6 Sw7 Sw8
Barcode cancellation ON
Barcode learning
Barcode recognition on ON
Barcode recognition off OFF
Card reader present OFF
Card reader absent ON
Lenght control off OFF
Lenght control on ON
-
8/12/2019 Ticket Eater_User Manual 2006
5/24
5
GENERAL RULES FOR THE CONFIGURATION
During this phase, the PRINT button in the front of the machine will be usedto adjust the current parameter. When pushed, the parameter will be
increased.To skip to the following parameter youll have to block the photo-electric cell inthe hole for inserting tickets, for example by inserting end removing a ticket orby passing a finger. Then the motor wont be activated.
HISTORICAL DATA PRINTING
This is useful if the Mangia Tickets isnt connected to a computer. The machinememorizes the number of the counted tickets in the last 60 days. To obtain the
printing of the data youll have to: Switch off the machine Place in OFF postion the switch n. 1 Switch on the machine A receipt, with date and number of tickets counted that day will be
printed. At the end the general total will be printed. Switch off the machine Place in ON postion the switch n. 1 Switch on the machine
If you dont clear the historical data (see the related paragraph), the memorywill contain the data of the last 60 days, and the system will replace the olddata with the new ones.
Example of a receipt with
the historical data
-
8/12/2019 Ticket Eater_User Manual 2006
6/24
6
CLOCK REGULATION
The clock regulation isnt necessary if the Mangia Tickets is connected to acomputer, because everytime the WinMt software is launched the internal clock
is updated. In order to to make this occur, is necessary to switch on theMangia Tickets before launching WinMt on the computer.If the Mangia Tickets isnt connected to a computer:
Switch off the machine Place in OFF postion the switch n. 2 Switch on the machine. On the display will appear: A.00. Youll have to
insert the year. With the PRINT button, choose the correct year (for example: A.06) Insert and remove a ticket from the hole. On the display will appear:
M.01. The parameter to adjust is the month.
Insert the number of the current month. (for example M.04 = April) Pass to the following parameter. On the display will appear: G.01 = day Adjust the number of the day (for example: G.17) Pass to the following parameter, on the display will appear: H.00 = hours Adjust the hours (for example: H.16) Pass to the following parameter, on the display will appear: M.00 =
minutes Adjust the minutes (for example: M.56) Pass to the following parameter, on the display will appear: ---- Switch off the machine Place in ON postion the switch n. 2 Switch on the machine
SERIAL NUMBER OF THE RECEIPTS AND TOTAL COUNTER OF THE
TICKETS CLEAR UP
The serial number of the receipts is a number that appears on every receiptprinted by the machine (see the COUNTING OF THE TICKETS paragraph). Thetotal counter of the tickets memorizes the number of tickets treated by the
Mangia Tickets, since its last clear up.To clear these two parameters: Switch off the machine Place in OFF postion the switches n. 1 and 2 Switch on the machine The display will show: ---- Switch off the machine Place in ON postion the switches n. 1 and 2 Switch on the machine
The next receipt will have 1 as serial number and the total tickets counterwill start from 0.
-
8/12/2019 Ticket Eater_User Manual 2006
7/24
7
REGULATION OF THE BEGINNING/ENDING DATE OF THE OPERATION
The regulation of the beginning/ending date of the Operation isnt necessary ifthe Mangia Tickets is connected to the computer because everytime WinMt islaunched the dates are adjusted following the instructions given in the
OPTIONS of the software. In order to to make this occur, is necessary toswitch on the Mangia Tickets before launching WinMt on the computer.
Regulation of the beginning date of the operation without connection to thecomputer:
Switch off the machine Place in OFF postion the switch n. 3 Switch on the machine, on the display will appear: A.00 = year Adjust the date as explained in the CLOCK REGULATION paragraph At the end the display will show: ----. Switch off the machine. Place in ON postion the switch n. 3 Switch on the machine
Regulation of the ending date of the operation: Switch off the machine Place in OFF postion the switches n. 1 and 3 Repeat the operation described above Switch off the machine Place in ON postion the switches n. 1 and 3
MACHINE CODE SET UP
The machine code is the number that distinguishes a Mangia Tickets fromanother if there are more than one in the same place. To set it up follow theseinstructions:
Turn off the machine Place in OFF postion the switches n. 1-2-3 Turn on the machine, on the display will appear: 00
With the PRINT button, choose a number (1-99) Block the photo-electric cell in the tickets hole The display will show---- Turn off the machine Place in ON postion the switches n. 1-2-3
-
8/12/2019 Ticket Eater_User Manual 2006
8/24
8
LENGHT OF THE TICKETS CALIBRATION
In order to avoid counting errors if a Customer tries to cheat (by blocking thetickets while they are being counted or by pulling them out ecc), the system
measures the lenght of the tickets and accepts them only if it is correct. Thesample lenght has to be memorized while installing the machine followingthese instructions:
Turn off the machine Place in OFF postion the switch n. 4 Turn on the machine (the display will show 0) Insert some tickets (the display will show the correspondent number to
the sampled lenght) Place in ON postion the switch n. 4 Insert other 5/6 tickets to confirm
Once done this operation, to activate the control of the lenght of the tickets isnecessary to place in ON position the switch n. 8.
PC CONNECTION SET UP
This option allows you to specify if the pc connection is or is not necessary. Ifthe machine is connected to a computer where WinMt is running, this optionhas to be set to 1 (necessary link) and can be set to 0 (absent ink) in case ofemergency, if the computer is broken. This allows the Mangia Tickets to workeven without a connected computer.
Switch off the machine Place in OFF postion the switches n. 1-4 Switch on the machine The display will show00 (connection de-activated) or01 (connection
activated) With thePRINT button adjust the parameter as you want:00 =
functioning without computer, 01 = fuctioning within computer Block the photo-electric cell in the tickets hole The display will show---- Turn off the machine
Place in ON postion the switches n. 1-4
MINIMUM NUMBER OF TICKETS FOR PRINTING SET UP
This option allows to set up a minimum number of tickets that must becounted before giving the Customer the possibility to print the receipt. This isto avoid wastes and to make the reading of the receipts quicker when giving aprice. Follow these instructions:
Switch off the machine Place in OFF postion the switches n. 2-4 Switch on the machine The display will show the minimum number of tickets set With thePRINT button adjust the parameter. Its value is from 0 to 99
-
8/12/2019 Ticket Eater_User Manual 2006
9/24
9
Block the photo-electric cell in the tickets hole The display will show ---- Turn off the machine Place in ON postion the switches n. 2-4
MEMORANDUM RECEIPT ACTIVATION
This option allows to activate or de-activate the printing of theMEMORANDUM receipt for the Customers who posess a Fidelity Card. To setit up follow these instructions:
Turn off the machine Place in OFF postion the switches n. 1-2-4 Switch on the machine The display will show00 (de-activated receipt) or01 (activated
receipt) With thePRINT button adjust tha parameter as you want:00 = the
receipt wont be printed, 01 the receipt will be printed Block the photo-electric cell in the tickets hole The display will show ---- Turn off the machine Place in ON postion the switches n. 1-2-4
BARCODE LEARNING AND CANCELLATION
This option allows to memorize or to cancel from the memory the barcodes ofthe tickets. The machine can accept at the same time 3 different types ofbarcodes. To memorize a barcode follow these instructions:
Switch off the machine
Place in OFF postion the switches n. 3-4 Switch on the machine The dislay will show0 Insert a ticket with the barcode that is to be memorized
1. If the reading is successful, the display will show the code with 4digits printed on the ticket, a sound will be played for 3 secondsand the the display will show:----.
2. Turn off the machine3. Place in ON postion the switches n. 3-4
If the reading isnt successful a sound will be played for 3 seconds. Goback to the previous step.
-
8/12/2019 Ticket Eater_User Manual 2006
10/24
10
To cancel a code already memorized:
Turn off the machine Place in OFF postion the switches n. 3-4 Place in ON postion the switch n. 5 Turn on the machine Do the explained above procedure, the code of the tickets that will be
inserted will be erased from the memory and the tickets with thatnumber wont be accepted anymore
Turn off the machine Place in OFF positon the switch n. 5 and in ON position the switches 3-4
MAXIMUM NUMBER OF BARCODE ERRORS SET UP
This parameter is to be modified if the machine goes too frequently to error 4
(incorrect barcode). This way the maximum number of errors while reading thebarcode is set. To adjust this parameter, follow these instructions:
Switch off the machine Place in OFF postion the switches n. 1-2-3-4 Switch on the machine On the display will be shown the present number of errors allowed Press the PRINT button to increase it (the value is from 1 to 19) Block the photo-electric cell in the tickets hole Turn off the machine Place in ON postion the switches n. 1-2-3-4
BARCODE ACTIVATION (sensor mod.ELC0504/a only)
To activate the recognition of tickets with barcode is necessary to replace theoriginal group of sensors (mod. ELC0504) with the appropriate(mod.ELC0504/a). Its even necessary to:
Turn off the machine
Place in ON postion the switch n. 6 Turn on the machine
FULL SACK SENSOR ACTIVATION
The Full Sack alarm blocks the machine when the number of cut ticketsreaches a too high level (full sack), preventing dangerous blockings. Thisoption is normally activated and must be activated. The possibility todeactivate it is for the compatibility with the mechanics of the version 1 and in
-
8/12/2019 Ticket Eater_User Manual 2006
11/24
11
case of breaking of the sensor itself. To activate and deactivate the sensorfollow these instructions:
Turn off the machine Place in OFF postion the switches n. 1-3-4 Turn on the machine The display wll show00 (deactivated alarm) or01 (activated alarm) With thePRINT button adjust the parameter as you want:00=
deactivated alarm, 01 activated alarm Block the photo-electric cell in the tickets hole The display will show ---- Turn off the machine Place in ON postion the switches n. 1-3-4
CHOICE OF THE INSTALLED CARD READER
This parameter is programmed in the factory and MUST NOT be changed,except if the magnetic card reader has to be changed. In this case, to programthe parameter according to the type of the installed reader, follow theseinstructions:
Turn off the machine Place in OFF postion the switches n. 2-3-4 Turn on the machine The display will show00 (MSR reader) or01 (HCR reader) With thePRINT button adjust the parameter as you want: 00 = MSR,
01 = HCR Block the photo-electric cell in the tickets hole The display will show ---- Turn off the machine Place in ON postion the switches n. 2-3-4
INITIALIZATION OF THE INSTALLED CARD READER
This procedure sends to the reader the initialization codes and has to be usedONLY in case of emergency. Follow these instructions:
Turn off the machine Place in OFF postion the switches n. 2-3-4 Press and keep pressing thePRINTbutton Turn on the machine The display will show00 (MSRreader) or01(HCR reader) The display will show---- Turn off the machine Place in ON postion the switches n. 2-3-4
-
8/12/2019 Ticket Eater_User Manual 2006
12/24
12
FUNCTIONING
TICKETS COUNTING
Insert the tickets in the appropriate hole, the motor will start working and thetickets will be dragged inside, passing through the photo-electric cells. Theywill be counted and, in the end, they will be cut by the helicoidal blade. Duringthe counting phase the display will show the number of the distroyed tickets.When the tickets end, the motor will stop and the light of the PRINT button willlit up. If other tickets are inserted, they will be added to the just counted.Once finished the tickets to count, if the Customer doesnt posess a card willhave to press the PRINT button. Otherwise, hell have to insert it in the reader
in the right position. In the first case, a receipt will be printed::
In the second case the receipt will have the same data with the notice:MEMORANDUM ONLY and the total number of the tickets piled up by theCurstomer. The barcode wont be printed.
-
8/12/2019 Ticket Eater_User Manual 2006
13/24
13
MAINTENANCE
REPLACING THE SACK
The sack for collecting the destroyed tickets is in the lower door of themachine, fixed to the flowing support. Pull out the support and take out the fullsack. Fix the new sack to the support and re-insert it in its place.
The content of the sack is recyclable material and has to be put in theappropriate containers for the paper.
REPLACING THE PAPER FOR THE PRINTER
If the roll of paper is over, the display will show error n. 1. To replace it, followthese instructions:
Open the upper door, the machine will go off (the possible countedtickets wont be lost).
Take out the iron flat support to make the operations easier Turn on the machine by pulling out the upper security switch (Image 5) Move the green lever for the lifting of the printer (Image 6) Take from the back the left paper Move the green lever to its original position (Image 6) Unroll about 20 cm of paper from the new roll, and make sure the edgeof the paper is perfectly cut, without borders, and the cut is
perpendicular to the papaer itself. Insert the paper in the rear hole and wait for the printer to load and to
cut it automatically. Place the roll in the roll-holder Close the door
ELIMINATING PAPER BLOCKAGES
In normal conditions and with the new roll, the green and the yellow leds ofthe printer must be lighted in a stable mode. If the red led is on, this meansthat the roll is finishing (the printing can continue but cant if the paper isntenough). If the yellow led flashes, there is a misfunctioning in the printer andin particular:
The printer is up: the lifting lever is moved towards outside (Image 6) The paper is blocked
To eliminate a blockage follow these instructions: Lift up the printer by moving the green lever (Fig.6) Take the paper from the back, and then re-load it as seen in the
paragraph above
-
8/12/2019 Ticket Eater_User Manual 2006
14/24
14
If the problem continues, control that there arent pieces of paper in theway of the paper. To do this move the lower sblocking lever (Image 6)and lift up the front part of the printer (Image 7).
Eliminate any possible piece of paper in the way Re-block the front part of the printer Load the paper as seen in the paragraph above
CLEANING THE DRAGGING AND CUTTING GROUP
Because of the quantity of tickets treated, the cleaning of the dragging andcutting group should be done at least once a week.
Turn off the machine Dismount the upper part of the dragging group (Images 1-2) Verify that thare arent pieces of tickets in the dragging way and in the
cutting group (Image 3) If necessary, dismount the cutting group by pulling it up (Image 4).
Clean the group and re-mount it. Clean the surfaces of the sensors with a soft brush or a duster (Image
3). Use only methylated spirit, dont use solvents. Re-mount the group of the sensors Turn on the machine
SENSIBILITY REGULATION
The machine is equipped with 4 sensors, 3 for the tickets counting and one forthe sack. Every sensor has an indipendent sensibility regulation: this regulationis done by the constructor and normally doesnt have to be modified. If thereare very hard to read tickets (with black patches in the center) there might bethe necessity to adjust the sensibility of the central sensor, the one for thecounting. If the reading is difficult the machine is frequently in alarm and thecounting is incorrect. Follow these instructions:
Deactivate the control of the lenght of the tickets (switch n.8 in OFFposition)
Adjust the trimmer in the group of the sensors (Fig.2) by turning it andby inserting a known number of tickets
When there arent counting errors, the calibration is done. Reactivate thecontrol of the lenght and, if necessary, do again the calibration of thelenght itself as explained in the related paragraph.
-
8/12/2019 Ticket Eater_User Manual 2006
15/24
15
Image 1 Image 2
Image 3
Image 4
Image 6Image 5
Image 3
-
8/12/2019 Ticket Eater_User Manual 2006
16/24
16
PROBLEMS AND SOLUTIONS
If, at the start, on the display appears a code like: ---X, this means that thereis a misfunctioning in one of the peripherals of the machine, and in particular:
ERROR CODE MEANING---0 Error in the group of the sensors:
Turn off the machine, insert 5 tickets and turnon. This is to eliminate a possible half ticket
Clean the dragging group Verify the connection cable from the CN1
connector of the motherboard.If the error continues, call the assistance.
---1 Printer error: Check that there is paper in the printer Check that the blocking lever of the paper is in
print position (Fig.6) Check the connection cable between the
motherboard (CN5) and the printer Check the feeding cable of the printer (CN10)
If the error continues, call the assistance.
---2 Card reader error:
Check that there is nothing inside the reader Check the connection cable with the
motherboard (CN5)
Check the feeding cable of the reader (CN9)If the error continues, call the assistance.
Image 7
-
8/12/2019 Ticket Eater_User Manual 2006
17/24
-
8/12/2019 Ticket Eater_User Manual 2006
18/24
18
SCHEMESSCHEME OF THE CABLES
-
8/12/2019 Ticket Eater_User Manual 2006
19/24
19
SCHEME OF THE CONNECTORS AND CARD LAYOUT
CN2 230 Vac Motor
1 230 Vac in
2 Ground3 230 Vac in
4 230 Vac to the motor
5 Ground to the motor
6 230 Vac to the motor
CN1 Sensors group
1 +5 Vcc
2 GND3 +5 Vcc
4 Sensor 1 input
5 +5 Vcc
6 GND
7 +5Vcc
8 Sensor 2 input
9 +5 Vcc
10 GND11 +5 Vcc
12 Sensor 3 input
CN9 Button Feeding
1 Lamp
2 GND3 N.C.
4 N.C.
5 N.O. Button
6 N.C.
7 N.C.
8 N.C.
9 N.C.
10 +5 Vcc11 + Card reader
12 Lamp
13 +12 Vcc
14 Common button
15 GND Card reader
CN3 Display
1 Clock
2 Data
3 +5 Vcc
4 N.C.5 Strobe
6 N.C.
7 +5 Vcc
8 +5 Vcc
9 GND
10 GND
11 GND
12 GND
13 GND
14 +12 Vcc
15 +12 Vcc
16 +12 Vcc
CN4 CN5 CN7
1 N.C.2 Rx
3 GND
4 GND
5 Tx
6 N.C.
CN10 Printer feeding
1 GND2 +24 Vcc
-
8/12/2019 Ticket Eater_User Manual 2006
20/24
20
CN13 Feeder
1 230 Vac
2 Ground
3 230 Vac
4 GND
5 GND
6 GND
7 +5Vcc
8 +12Vcc
9 +24Vcc
CN11 Sack sensor
1 +5Vcc
2 GND
3 +5Vcc
4 Sensor input
-
8/12/2019 Ticket Eater_User Manual 2006
21/24
21
DECLARATION OF CONFORMITY
IS DECLARED THAT:
Product: Mangia Tickets MOD. MT6
Built by: Elmac di Tredese TizianoVia G. Colombo 1935030 RUBANO (PD)
has been tested to the targets of the ELECTROMAGNETIC COMPATIBILITY and LOWTENSION by:
EUROTESTZona Inustriale 1^ strada 5CONSELVE (PD)
All the tested effects and the encountered effects are inside the prescriptive limits.And so the machine in exam:
Is in accordance with the COMMON LAWS89/336/CEE (Electromagnetic Compatibility Directive)89/392/CEE di tipo A73/23/CEE (Low Voltage Directive)
because is suitable for the requirements expected by the specific technic laws:
EN 55014 EN 55014-1/A1 EN 55014-2 EN 60555-2 EN 60555-3+A1 EN 61000-4-2EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-11.EN 60950.
Rubano, 3rd January 2006
eng. Tredese Tiziano (owner)
ELMACdi TREDESE TIZIANO
Domicilio Fisca le: Via G. Colombo, 17 35030 Rubano (Padova) ITALYSede Operativa: Via Picc Grolli, 2/Quater 35030 Rubano (Padova) ITALYTel. 049.89.76.176 r.a.- Fax 049.89.76.179www.elmac.com [email protected]
Codice Fiscale TRD TZN 46B17 H625HPartita IVA / VAT No. IT01354370288Albo Imp. Art. 73543 CCIAA R.D. 0205583Cod. Mecc. PD005999 Iscr. Reg. Imp.: PD 124639Banco Ambrosiano Veneto,Ag. Rubano (Padova) - C.C. 8885/60ABI 3001-5 CAB 62790
-
8/12/2019 Ticket Eater_User Manual 2006
22/24
22
NOTE
-
8/12/2019 Ticket Eater_User Manual 2006
23/24
23
-
8/12/2019 Ticket Eater_User Manual 2006
24/24