thermo scientific new generation mep-300 · the mep-300 has been developed to replace both the mep...
TRANSCRIPT
Pro
du
ct Sp
ecifica
tion
s
The Thermo Scientific MEP-300 Multi-Element Probe provides continuous in steam analysis without the need for liquid nitrogen. When used as part of the Thermo Scientific AnSat, Duplex AnStat or MSA, it allows plant operators to follow and respond to process trends in real time.
The MEP-300 has been developed to replace both the MEP and MEP-200 liquid nitrogen cooled X-ray Florescence immersion probes used in the AnStat, Duplex AnStat and MSA. It may also be used to replace Single Element Probe (SEP) analyzers in Iron, Copper, Zinc, Lead and other applications.
The MEP-300 contains a thermo-electrically cooled, energy dispersive X-ray detector to
deliver outstanding performance across a wide range of elements.
The MEP-300 uses an advanced Silicon Drift Detector (SDD) which is both compact, rugged and does not require cryogenic temperatures. The detector resolution and counting rates offer quality analytical performance, resulting in the MEP-300 being ideal as an upgrade to your existing systems.
The advantages include increased safety (eliminating hazardous material), a decrease in utility costs (non purchase of LN2) and a manpower saving (as there is no need to service with LN2).
S A M P L I N G A N D A N A L Y S I S
Thermo Scientific New Generation MEP-300 Upgrade and Replacement Kit Options
Features and Advancements:
• Advanced energy dispersive X-ray detector that does not require liquid nitrogen cooling
• On-board digital signal processing
• Ethernet LAN connectivity
• Environmental sensors and alarms
• Detector and source holder retract, enabling unattended standardization (source is fully shielded when detector is retracted)
Thermo Scientific MEP-300
2
All configurations contain:
• MEP-300 Multi-element Probe
• MEP-300 Controller Enclosure
• WinISA software providing configuration, operation, maintenance, calibration and communications by Ethernet TCP/IP
Common benefits of the upgrade
• The MEP-300 can use the existing isotope to reduce the cost of an upgrade and maintain the radiation product license.
• The MEP-300 electronics replace the earlier analogue MEP or the more recent digital MEP-200 electronics.
• The MEP-300 Controller (with software upgrades) replaces earlier controller versions - extending the service life of the equipment.
• The MEP-300 (with an integral retractable source for greater protection) can measure many elements and levels of % solids - which are communicated to a central server.
Thermo Scientific New Generation MEP-300 Upgrade and Replacement Kit Options
Probe Leg:
• Detector - Providing quality analytical performance
• Window rupture protection with back-up window
• Sealed heat exchanger
• Automatic standardization
• Integral retractable source and detector - For greater protection and safety - Can be deployed remotely
(IP65) Shroud:
• Interchangeable interface and control unit
• High visibility beacon offering a quick visual confirmation of operational status and alarm conditions
• Temperature, humidity and vibration sensor package
• Cooling package (pneumatic)
3
Why should I upgrade? Reduce costs, increased safety and greater efficiency
What product can be upgraded? AnStat, Duplex AnStat and MSA (4.0 onwards)
What are the steps in the upgrade proposal process? • Contact your local Thermo Scientific sales or service • Complete site questionnaire • Site visit and equipment audit • Receive proposal
What do I have to prepare for? A detailed list of site preparation tasks will be provided with the upgrade proposal.
After accepting the proposal a Thermo Scientific service engineer will visit and install the upgrade, provide training and assist with calibration. In some cases LAN and instrument air infrastructure will need to be augmented.
Will I have to recalibrate? Yes, you will need to allow for a new calibration of the equipment.
Can I replace my SEP with the MEP-300? Yes, several single element probes (SEP) can be replaced with a single MEP-300, therefore only requiring one isotope.
If I replace a SEP what will I need? The MEP-300 configuration will fully replace the SEP; however you will require a hoist.
Will there be any impact to my accuracy? No, the MEP-300 will provide comparable accuracy.
Can I use my existing source? In most cases it can be transferred to the MEP-300 during the upgrade; however in some cases the source may need to be replenished.
How is the radioactive materials license affected? You will need to notify your local regulatory authority that the source is being moved to a new device and advise them of the new device number.
UPGRADE FAQs
MSA with Upgrade
Duplex AnStat with Upgrade
AnStat with Upgrade
Thermo Scientific MEP-200 LN2 cooled detector vs. MEP-300 air cooled MEP-300 controller and additional spares
Pro
du
ct Sp
ecifica
tion
sThermo Scientific New Generation MEP-300
MEP-300 Physical Specifications
Probe Weight Approx.50kg
Dimensions Approx.1.0m high x 0.35m wide x 0.40m deep
Controller Weight 70 kg
Dimensions 800 x 600 x 300 mm
Utilities Instrument Air per ANSI ISA-S7 0 0-1996
Air Consumption (slpm @ 600 kPa) Device @20C @45C Maximum (peak) Controller nil 125-250 300 MEP-300 13.5 80-200 405 Note: Consumption may vary depending on actual slurry and air temperatures is given at steady state operating conditions. Controller values given for extended cooling option. The coolers operate intermittently at peak so consumption is an averaged value.
Air Pressure 550-600 kPa nominal - 1000 kPa maximum
MEP-300 Volume Flow Rate 475 slpm (standard litres per minute)
Extended Cooling Option 566 slpm (standard litres per minute) Note: Cabinet cooler and Probe cooler options to extend operating temperature range
Power (to TE749/30 controller) Three Phase 48 to 62 Hz. Max 2.5kVA Neutral not required. Any of the standard three phase voltages used in the world mining industry in the range 380-600 Volts AC may be factory or field selected. Variation should not exceed ±10% of the nominal voltage selected
Communications Ethernet TCP/IP: 100 MBps. Remote login to WinISA computer required. Reserve Static IP addresses: One for WinISA PC and one for each analyzer
Environmental
Operating Temperature (Ambient) -10°C to 55°C (measured at enclosure surface temperature, temperature to not exceed 55°C)
Operating Temperature (Process Fluid) 0°C to 45°C, Check with factory for higher temperature options
Humidity 0 to 95% RH - non condensing
Vibration < 0.5G at installation tank supports
Protection Class
Controller Enclosure IP65, NEMA 4X
MEP-300 IP65 - suitable for continuous immersion in slurry
Compliance and Standards
Controller Enclosure and MEP-300 CE, ICES 001, CSA, FCC Part 15B and RCM Note: Upgrade does not confer compliance on non-compliant legacy systems or where field evaluations by local regulatory authorities may be required.
thermoscientific.com/minerals [email protected] © 2014 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries. Specifications, terms and pricing are subject to change. Not all products are available in all countries. Please consult your local sales representative for details.
PI.8103.0814
Australia+61 (0) 8 8208 8200+61 (0) 8 8234 3772 fax
North America+1 800 488 4399+1 858 452 9250 fax
Chile+56 (0) 2 378 5080+56 (0) 2 370 1082 fax
Africa+27 (0) 11 822 4120+27 (0) 11 822 3982 fax
China+86 (0) 80 0810 5118+86 (0) 21 6445 1101 fax
India+91 (20) 6626 7000+91 (20) 6626 7001 fax
Europe+358 9 3291 0788+358 9 3291 0580 fax
Brazil+55 11 2367-2192+55 11 2367 1112 fax
Mexico+52 (55) 1253 9410+52 (55) 1253 9424 fax
Thermo Fisher Scientific,Adelaide, Australia is ISO Certified.
UPGRADE