thermadyne product guide

Contents

Thermal Arc Welding Equipment

PagePart No DC Stick + TIG Inverters and AC/DC MachinesW1003605 161S 1W1002903 175SE 2

W1003003 175TE 3W1003803 201 TS 410-9326 250TE 510-9401 300WTE 610-3091 400 TS 7

10-3099 200 AC/DC 810-3098 300 AC/DC 910-9402 220 AC/DC 1010-9403 350 AC/DC 11

MIG MachinesW1003186 Fabricator 181i 12707079 Fabricator 200 13706114 Fabricator 250 14706124 +706125 Fabricator 330 Compact and Separate 1510-9405 Fabricator 400II 1610-9406 Fabricator 450II 17W1000103PP PowerMaster Plus 320SP Air Cooled 18W1000303PP PowerMaster Plus 400SP Air Cooled 19W1000203PP PowerMaster Plus 400SP Water Cooled 20W1000503PP PowerMaster Plus 500SP Water Cooled 21W1000203PP PowerMaster Plus 400SP Robotic Package 22W1000503PP PowerMaster Plus 500SP Robotic Package 23DSA.40 Digital Torches - Air Cooled 24DSW.300/DSW.450 Digital Torches - Water Cooled 25

Multi Process Machines and Wire Feed Units10-3089 400 MST 26TIG/HF400A 400 MST HF TIG BOX 27030104-A-SPTH 400 MST Wire Feed Unit 2810-9330 220 GMS 2910-9407 300 GMS 3010-9408 400 GMS 31

Refer to Page Trolleys 32

Contents

Thermal Dynamics Cutting Equipment

Plasma Cutting1-3835-4 Drag-Gun Plus 331-1604-4 CutSkill 35A 341-4200-4 CutMaster 12 PLUS - SL40 ATC - 4.5m 351-5130-4 / 1-5131-4 CutMaster 12 - SL60 ATC - 6.1m / 15.2m 361-1130-4 / 1-1131-4 CutMaster 20 - SL60 ATC - 6.1m / 15.2m 371-1330-4 / 1-1331-4 CutMaster 25 - SL60 ATC - 6.1m / 15.2m 381-1730-4 / 1-1731-4 CutMaster 35 - SL100 ATC - 6.1m / 15.2m 391-1930-4 / 1-1931-4 CutMaster 40 - SL100 ATC - 6.1m / 15.2m 403-0005 Pak 200 41

Refer to Page 1Torch 42 - 43Refer to Page Torch Adapter Kits 44Refer to Page Accessories 45 - 47

Tweco Arc Accessories

WHF41001 Auto-Darkening Welding Helmet 48Refer to Page WeldSkill MIG Torches 49Refer to Page TWE European MIG Torches 49Refer to Page Classic Tweco MIG Torches 49Refer to Page MIG Torch Consumables 50

Refer to Page Arcair Air-Carbon Arc Gouging Equipment 51Refer to Page Arcair Slice Cutting Equipment 52

General Information

Generator Requirments 53-54Warranty Information 55Terms and Conditions 56Contacts 57

Arcair Arc Accessories

WE

LD

ING

EQ

UIP

ME

NT

STICK (SMAW) INVERTER

Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net WeightW1003605 30% @ 160A (230v) 10 - 160 Amps 229 x 135 x 394 mm 7.9 kg

35% @ 100A (110v) 10 - 125 Amps

Process STICK LIFT TIG

161 S1ph 110/230V Input, 160A Stick Inverter

1

PHASE

50HZ

60CC DC >>>> >>>>

>>>>

Part No. Description List Price £

W1003605 TA 161S 160 Amp Inverter Package power cord, MMA leads 553.00with 50mm dinse connections, operating manual, carry strap & case

OPTIONS AND ACCESSORIES

90924 Stick Kit (earth cable + clamp, electrode holder and lead) 162.18305.050.404 TIG Torch with valve SA17V.4m 79.19305.050.804 TIG Torch with valve SA17V.8m 110.8610-9997 50mm² DINSE TIG Torch Adapter 33.58

Item Description

1 Amperage Control – the amperage control selects the desired amperage between 10–160A (230v) and 10-125A (110v)

2 Warning Indicator – illuminates if machine overheats causing thermal overload

3 Power ON/OFF indicator4 Process selection switch. Allows operator to choose

output function from ‘Lift TIG’ or ‘Manual Arc’ process

23

1

- 1 -

Machine SpecificationsMains Input Voltage 1ph. 110/230v Open Circuit Voltage 71VProtection Factor IP23SWarranty Period 2 Years

Features BenefitsDual Voltage Input Power Suitable for use on 110 or 230 VACExcellent Portability Weighs less than 8kg and has easy to carry shoulder strapThermal Overload Protection Alerts operator if duty cycle is exceeded or airflow is blockedwith indicatorAutomatic Arc Control For STICK welding - Automatically fine tunes the arc to prevent

the electrode from sticking and creating an inclusion50mm Output Terminals Allow for easy polarity reversal and cable changeLift Start TIG Provides TIG arc starting without use of high frequencySmartLinkTM Input Automatically linking to 110 or 230 VACPower Factor Correction 'The greener option' offers a higher output while reducing input

power consumption!

4

WE

LD

ING

EQ

UIP

ME

NT

STICK (MMA) INVERTER


ARCMASTER 175 SE1ph 230V Input, 175A Stick Inverter with Lift-Start Tig function


W1002903 TA 175 SE 175 Amp Inverter Power Source, power cord, MMA leads 360.00with 50mm dinse connections, operating manual, carry strap & case


90924 Stick Kit (earth cable + clamp, electrode holder and lead) 162.18305.050.404 TIG Torch with valve SA17V.4m 79.19305.050.804 TIG Torch with valve SA17V.8m 110.8610-9997 50mm² DINSE TIG Torch Adapter 33.58

Item Description1 Power on Indicator. Visibly indicates that input

power is present2 Process selection switch. Allows operator to choose

output function from ‘Lift TIG’ or ‘Manual Arc’ process

3 Over temperature indicator. Illuminates if machine duty cycle has been exceeded

4 Weld current control (Amperage). Allows operator to set output welding amperage

41

1

PHASE

50HZ

60CC DC >>>> >>>>

>>>>

2 3

Machine SpecificationsMains Input Voltage 1ph. 230v Open Circuit Voltage 65VWarranty Period 2 Years

Features BenefitsExceptional Performance Smooth stable arc with electrodes to 4mmExcellent Portability Weighs less than 6.5kg and has easy to carry shoulder strapThermal Overload Protection Indicator alerts if duty cycle is exceeded or airflow is blockedEasy to Use Simple, user friendly set up and operationCable Fitted Supplied with 230VAC primary cable50mm Output Terminals Allow for easy polarity reversal and cable changeLift Start TIG Provides TIG arc starting without use of high frequencyOver Voltage Protection Full input protection for over voltage

Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net WeightW1002903 20% @ 175A (TIG) 5 - 175A (230V) 230 x 130 x 330 mm 6.5 kg

20% @ 175A (STICK)

INVERTER

- 2 -

WE

LD

ING

EQ

UIP

ME

NT

TIG (GTAW) INVERTER


ARCMASTER 175 TE1ph 230V Input, 175A HF TIG Inverter


W1003003 TA 175 TE Inverter Power Source with 5m electrode lead, 5m work lead, 750.003m TIG Torch and TIG Torch consumables kit, operating manual, carry strap & case


W4012800 Site Carry Case 47.2290924 Stick Kit (earth cable + clamp, electrode holder and lead) 162.18W4012700 Torch TIG, 17, 3m, 50mm Dinse with 5/8”-18 UNF Male gas fitting 122.4010-9811 Plug for Remote or TIG Torch Button 25.50

Item Description1 Power on indicator2 Amperage control - the amperage control selects the

desired amperage between 5 - 175A3 Thermal overload indicator4 Trigger mode selection switch (TIG process only)5 Adjustable Arc Control (Manual Arc (Stick) process

only) or Adjustable Down Slope Control (TIGprocess only)

6 Manual Arc (Stick), Lift TIG, HF TIG weld process selection control

7 Eight pin socket for torch trigger switch connection (Remote weld current control is not available)

8 50mm Dinse weld terminals41

1

PHASE

50HZ

60CC DC >>>> >>>>

>>>>

2 3

Machine SpecificationsMains Input Voltage 1ph. 230v Open Circuit Voltage 65VWarranty Period 2 Years

Features BenefitsThermal Overload Protection Alerts the operator if duty cycle is exceeded or fan is blockedwith indicatorAdjustable Arc Control For Manual Arc (Stick) welding - the operator can adjust the arc

penetration to eliminate electrode stickAdjustable Down Slope Control For TIG welding - the operator can adjust the time for the weld

current to ramp down to eliminate cratersLift-Start TIG Provides TIG arc starting without use of high frequencyHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material

contaminationTrigger Control 2T (Normal) for short weld runs and 4T (Latch) for long weld runsOver Voltage Protection Full input protection for over voltage

Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net WeightW1003003 20% @ 175A 5 - 175A 225 x 130 x 330 mm 7.5 kg

INVERTER

- 3 -

56

WE

LD

ING

EQ

UIP

ME

NT

TIG (GTAW) INVERTER

ARCMASTER 201 TS1ph 110/230V SmartLinkTM Input, 200A Tig Inverter with HF Tig, Lift Tig, Stick, Hot Start, 2T/4T Function,Down Slope Timer and Arc Force Control


W1003803 TA 201TS Inverter Power Source with 4m electrode lead, 3m work lead, 1200.004m TIG Torch and TIG Torch consumables kit, operating manual, carry strap & case

Item Description1 Power Indicator Light2 Overheat / Fault Indicator Light3 2T/4T Trigger Switch / Hold4 Stick / Lift TIG / HF TIG Process Switch5 Down Slope / Arc Force Control Knob6 8 Pin Control Socket7 Positive Weld Output 50 mm Dinse Receptacle8 Negative Weld Output 50 mm Dinse Receptacle9 Gas output fitting 5/8"-18 Female10 Weld Amperage Control Knob

3

41

1

PHASE

50HZ

60CC DC >>>> >>>>

>>>>


10-4016 Remote Foot Control 7.6m lead and plug 298.0010-4014 Remote Hand Pendant 7.6m lead and plug 241.2590924 Stick Kit (earth cable + clamp, electrode holder and lead) 162.18W4012700 Torch TIG, 17, 3m, 50mm Dinse with 5/8”-18 UNF Male gas fitting 122.4010-9811 Plug for Remote or TIG Torch Button 25.50

2

5

7

6

-4 -

Machine SpecificationsMains Input Voltage 1ph. 110/230v SmartLinkTM Open Circuit Voltage 71VProtection Factor IP23S Warranty Period 2 Years

Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net WeightW1003803 20% @ 200A 10 - 200A (230V) 230 x 135 x 445 mm 10 kg

10 - 160A (110V)


Features BenefitsDual Voltage Input Power Suitable for use on 110 or 230 VACThermal Overload Protection Alerts the operator if duty cycle is exceeded or fan is blocked

with indicatorAdjustable Arc Control For Manual Arc (Stick) welding - the operator can adjust the arc

penetration to eliminate electrode stickAdjustable Down Slope Control For TIG welding - the operator can adjust the time for the weld

current to ramp down to eliminate cratersLift-Start TIG Provides TIG arc starting without use of high frequencyHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material

contaminationTrigger Control 2T (Normal) for short weld runs and 4T (Latch) for long weld runsOver Voltage Protection Full input protection for over voltagePower Factor Correction 'The greener option' offers a higher output while reducing input

power consumption!

10

9

8

Coming Q2

2011

WE

LD

ING

EQ

UIP

ME

NT

TIG (GTAW) INVERTER

Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight10-9326 60% @ 250A 3 - 250 Amps 372 x 209 x 377 mm 16.5 kg

Process HF TIG LIFT TIG STICK

250 TE3ph 400V Input, 250A Tig Inverter with HF Tig, Lift Tig, Stick, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse


10-9326 TA 250 TE 250 Amp DC TIG Inverter Power Source 2355.00with operating manual, primary cable and TIG plug (CO4025)


020218/MT Thermal Arc HD Inverter Cart 578.00020258/TH Thermal Arc HD Cooler TIG 1153.0010-9996 Remote Foot Control 7.6m lead+plug 298.00010330 RC01 10m Standard Remote Control 407.41C04025 5-Pin TIG Plug 32.5710-9840/F Remote Control Plug 91.4110-9997 50mm2 DINSE TIG Torch adapter 33.58304.090.404 SA.26.4 TIG Torch 103.07

1 4

3

PHASE

50HZ

60CC DC >>>> >>>>

>>>>

2 3

8

7

9

65

1011

12

13 14 1516

Machine SpecificationsMains Input Voltage 3ph. 400v Open Circuit Voltage 65VProtection Factor IP23 Warranty Period 2 Years

Please note: To fit a mono cable style TIG torch to this unit for TIG welding you will need a 50mm2 DINSE type TIG torch adapter (part number 10-9997)

- 5 -

Item Description

1 Selection key for Stick or TIG mode2 Stick / TIG mode indicator3 Pulse current controls4 Selection key for HF or Lift Arc TIG5 HF ignition indicator6 Selection key for 2 stroke or 4 stroke operation7 2 stroke or 4 stroke mode indicator8 Selection key for pre-gas time9 Selection key for post-gas time10 Selection key for up slope time11 Control button for down slope time12 Output control potentiometer13 Amperage or voltage display indicator14 Amperage or voltage selection key15 Thermal overload and phase down indicator16 Digital meter display

Features BenefitsSmart Logic® Eliminates damage if the machine is accidentally installed to the improper voltageThermal Overload Protection Alerts operator if duty cycle is exceeded or airflow is blocked with indicatorSimple to use Control Panel All functions and controls are easily set through robust easy to use push buttonInterface switchesRemote Receptacle Allows remote devices to be connected for controlling amperage and output contactorLift-Start TIG Provides TIG arc starting without use of high frequencyHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contaminationTIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage,

initial and final slope times and amperage control

WE

LD

ING

EQ

UIP

ME

NT

Item DescriptionF1 Setting key MMA, TIG, 2/4 stroke F14 Indicator 4 stroke TIG weldingF2 SET UP setting key F15 Indicator A current on F8 displayF3 Pulse ON/OFF setting key F16 Indicator ‘%’ on F8 displayF4 Low current adjustment key F17 Indicator ‘time in s’ on F8 displayF5 Pulse frequency adjustment key F18 Indicator ‘Hz’ on F8 displayF6 Post gas, final current set key F19 Indicator ‘mm’ on F8 displayF7 Pre-gas, initial current, upslope F20 Indicator ‘pregas duration’F8 Digital display F21 Indicator ‘initial current’F9 Digital display F22 indicator ‘up slope time’F10 Parameter adjustment knob F23 Indicator ‘Pulse mode’ ONF11 Downslope time adjustment F24 Indicator ‘final current’F12 Indicator MMA Welding F25 Indicator ‘post gas duration’F13 Indicator 2 stroke TIG welding F26 indicator main supply default

F27 Indicator cooler unit default

TIG (GTAW) INVERTER

Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight10-9401 40% @ 300A 3 - 300 Amps 460 x 280 x 577 mm 27 kg

60% @ 250A


300 WTE3ph 400V Input, 300A Digital DC Waveform, Tig & Stick Inverter with fully integrated Water Cooling, DigitalMeters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse


10-9401 TA 300 WTE 300 Amp Inverter Power Source with fully integrated 4352.00water cooling system with operating manual, primary cable and TIG plug (CO4025)

OPTIONS AND ACCESSORIES020212/SA Universal Trolley 357.0010-9996 Remote Foot Control 7.6m lead+plug 298.00010330 RC01 10m Standard Remote Control 407.41C04025 5-Pin TIG Plug 32.9710-9840/F Remote Control Plug 91.4110-9997 50mm2 DINSE TIG Torch adapter 33.58302.060.404 SA.20.4 TIG Torch 125.787-3580 Coolant 20.75

F1

3

PHASE

50HZ

60CC DC >>>> >>>>

>>>>

Please note: To fit a 3 piece water cooled TIG torch to this unit for TIG welding you will need a 50mm2 DINSE type TIG torch adapter (part number 10-9997)

Machine SpecificationsMains Input Voltage 3ph. 400v Open Circuit Voltage 50 - 60VProtection Factor IP23 Warranty Period 2 Years

Features BenefitsSmart Logic® Eliminates damage if the machine is accidentally installed to the improper voltageThermal Overload Protection Alerts operator if duty cycle is exceeded or airflow is blocked with indicatorSimple to use Control Panel All functions and controls are easily set through robust easy to use push button switchesInterfaceCoolant Flow Protection Protects torch from damage due to coolant blockage or cooling system malfunctionRemote Receptacle Allows remote devices to be connected for controlling amperage and output contactorLift-Start TIG Provides TIG arc starting without use of high frequencyHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contaminationTIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage,

initial and final slope times and amperage controlVRD VRD stands for Voltage Reduction Device, it reduces the OCV when the power supply is

not in use. Eliminates the need for add on voltage reducers. (Field Capable)Parameter memory settings Gives memory programmes which can easily be saved and recalled to give job settings to

the operator at the push of a button

F2

F3

F4

F5 F6

F8 F9

F10F11

F12F13F14

F15F16F17F18

F20F21

F22F23

F24F25

F26

F27F19

F7

- 6 -

WE

LD

ING

EQ

UIP

ME

NT

TIG (GTAW) INVERTER



ARCMASTER 400 TS3ph 380/415V Input, 400A Tig Inverter with HF Tig, Lift Tig, Stick, Hot Start, Digital Meters, 2T/4TFunction, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse

Part No. Description List Price £10-3091 TA 400 TS 400 Amp DC TIG Inverter Power Source 4170.00

with operating manual, primary cable, TIG plug (10-2096) and cable clamp (10-2097)

3

PHASE

50HZ

60CC DC >>>> >>>>

>>>>

OPTIONS AND ACCESSORIESCRT.ARCM3.1 ArcMaster 3.1 Workshop Cart 422.00WC.ARCM3.1 ArcMaster Cooler 1080.0010-2007 Remote Foot control 7.6m lead and plug 378.0310-2005 Remote Hand Pendant 7.6m lead and plug 249.0110-2096 14 Pin Plug for Remote or TIG Torch Button 45.7910-2097 Cable Clamp for 14 Pin Plug 7.67304.090.404 SA.26.4 TIG Torch 103.07

3

2

4 7

5

6

Item Description

1 Pulse Function - enables the TIG current pulse functions2 Scroll Buttons - Used to select the parameter to be set. The LED’s show

which function is being adjusted on the Sequence Graph3 TIG Mode Functions - Pressing this button scrolls through the output TIG

function models (Standard, Slope, Slope w/repeat, Spot)4 Digital LED Display - Welding amperage and parameter values are displayed

in this window. internal warnings such as over temperature, low or high input voltage applied are signalled to the operator by a warning sound and error message on the screen

5 Save/Load Buttons (400 TS) - By using the Save & Load buttons the operator can easily save up to 5 welding parameter programs

6 Process Button - This button selects between STICK, HF TIG or Lift TIG mode7 Control knob - Allows the operator to adjust the output amperage within

the entire range of the power source, also used to set each parameter value

- 7 -

Machine SpecificationsMains Input Voltage 3ph. 380/415v Open Circuit Voltage 65VProtection Factor IP23S Warranty Period 3 Years

1

Features BenefitsSmart Logic® Eliminates damage if the machine is accidentally installed to the improper voltageThermal Overload Protection Alerts operator if duty cycle is exceeded or airflow is blockedwith indicatorSimple to use Control Panel All functions and controls are easily set through robust easy to use push button switchesInterfaceRemote Receptacle Allows remote devices to be connected for controlling amperage and output contactorWarning Circuitry Alerts operator of power supply abnormalitiesVRD VRD stands for Voltage Reduction Device, it reduces the OCV when the power supply is

not in use. Eliminates the need for add on voltage reducers. (Field Capable)Programmable Allowing for 5 welding programmes to be saved for maximum flexibility as standard featuresLift-Start TIG Provides TIG arc starting without use of high frequencyHot Start For STICK welding - Provides ease of arc startsHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contaminationTIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage, initial

and final slope times and amperage controlParameter memory settings Gives memory programmes which can easily be saved and recalled to give job settings to


WE

LD

ING

EQ

UIP

ME

NT

TIG (GTAW) INVERTER


40% @ 160A


ARCMASTER 200 AC/DC1ph 230V Input, 200A Tig Inverter with HF Tig, Lift Tig, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/DownSlope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control


10-3099 TA 200 AC/DC 200 Amp TIG Inverter Power Source 3250.00with operating manual, primary cable and Tig plug (10-9811)

OPTIONS AND ACCESSORIES020212/SA Universal Trolley 357.0010-4016 Remote Foot control 7.6m lead and plug 298.0010-4014 Remote Hand Pendant 7.6m lead and plug 241.2510-9811 Plug for Remote or TIG Torch Button 25.50304.090.404 SA.26.4 TIG Torch 103.07

1

PHASE

50HZ

60CC>>>> >>>>AC

DC>>>>

Item Description

1 Pulse Function - Pressing this button enables the TIG current pulse functions2 Scroll Buttons - Used to select the parameter to be set. The LED’s show

which function is being adjusted on the Sequence Graph.3 TIG Mode Functions - Pressing this button scrolls through the output TIG



5 Control knob - Allows the operator to adjust the output amperage within the entire range of the power source, also used to set each parameter value

6 Process Button - This button selects between STICK, HF TIG or Lift TIG mode7 AC/DC Button - Selects between AC or DC welding output

- 8 -

1

4

2

3

7

65

Machine SpecificationsMains Input Voltage 1ph. 230v Open Circuit Voltage 65VProtection Factor IP23S Warranty Period 3 Years

Features BenefitsSmart Logic® Eliminates damage if the machine is accidentally installed to the improper voltageThermal Overload Protection Alerts operator if duty cycle is exceeded or airflow is blockedwith indicatorSimple to use Control Panel All functions and controls are easily set through robust easy to use push buttonInterface switchesRemote Receptacle Allows remote devices to be connected for controlling amperage and output

contactorWarning Circuitry Alerts operator of power supply abnormalitiesVRD VRD stands for Voltage Reduction Device, it reduces the OCV when the power

supply is not in use. Eliminates the need for add on voltage reducers. (Field Capable)Lift-Start TIG Provides TIG arc starting without use of high frequencyHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contaminationTIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak

amperage, initial and final slope times and amperage controlParameter memory settings Gives memory programmes which can easily be saved and recalled to give job settings to


WE

LD

ING

EQ

UIP

ME

NT

Item Description

1 Pulse Function - enables the TIG current pulse functions2 Remote Current Function - enables remote current functions3 TIG Mode Functions - Pressing this button scrolls through the output TIG



5 Save/Load Button - By using the Save & Load buttons the operator can easily save up to 5 welding parameter programmes

6 Control knob - Allows the operator to adjust the output amperage within the entire range of the power source, also used to set each parameter value

7 Process Button - This button selects between STICK, or Lift TIG mode8 Scroll Buttons - Used to select the parameters to be set. The LED’s show

which function is being adjusted on the Sequence Graph9 AC/DC Button - Selects between AC or DC welding output

TIG (GTAW) INVERTER

PROCESS HF TIG LIFT TIG STICK

ARCMASTER 300 AC/DC3ph 380/415V Input, 300A Tig Inverter with HF Tig, Lift Tig, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control


10-3098 TA 300 AC/DC 300 Amp AC/DC TIG Inverter Power Source 5211.00with operating manual, primary cable, TIG plug (10-2096) and cable clamp (10-2097)

3

PHASE

50HZ

60CC

AC

DC >>>> >>>>>>>>

1

4

2

3 5 76

8

9

- 9 -

OPTIONS AND ACCESSORIESCRT.ARCM3.1 ArcMaster 3.1 Workshop Cart 422.00WC.ARCM3.1 ArcMaster Cooler 1080.0010-2007 Remote Foot control 7.6m lead and plug 378.0310-2005 Remote Hand Pendant 7.6m lead and plug 249.0110-2096 14 Pin Plug for Remote or TIG Torch Button 45.7910-2097 Cable Clamp for 14 Pin Plug 7.6710-9997 50mm2 DINSE TIG Torch adapter 33.58304.090.404 SA.26.4 TIG Torch - air cooled 103.07302.050.404 SA.18.4 TIG Torch - water cooled 128.40Machine SpecificationsMains Input Voltage 3ph. 400v Open Circuit Voltage 65VProtection Factor IP23S Warranty Period 3 YearsFeatures BenefitsSmart Logic® Eliminates damage if the machine is accidentally installed to the improper voltageThermal Overload Protection Alerts operator if duty cycle is exceeded or airflow is blocked with indicatorSimple to use Control Panel All functions and controls are easily set through robust easy to use push button switches InterfaceRemote Receptacle Allows remote devices to be connected for controlling amperage and output contactorWarning Circuitry Alerts operator of power supply abnormalitiesVRD VRD stands for Voltage Reduction Device, it reduces the OCV when the power supply is

not in use. Eliminates the need for add on voltage reducers. (Field Capable)Programmable Allowing for 5 welding programmes to be saved for maximum flexibility as standard featuresLift-Start TIG Provides TIG arc starting without use of high frequencyHot Start For STICK welding - Provides ease of arc startsHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contaminationTIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage,

initial and final slope times and amperage controlParameter memory settings Gives memory programmes which can easily be saved and recalled to give job settings to



40% @ 250A

WE

LD

ING

EQ

UIP

ME

NT

Item Description1 Selection key for Stick or TIG mode2 Stick / TIG mode indicator3 AC function + pulse current controls4 Selection key for HF or Lift Arc TIG5 HF ignition indicator6 Selection key for 2 or 4 stroke operation7 2 stroke or 4 stroke mode indicator8 Selection key for pre-gas time9 Selection key for post-gas time10 Selection key for up slope time 11 Control button for down slope time12 Output control potentiometer13 Amperage or voltage display indicator14 Amperage or voltage selection key15 Thermal overload/phase down indicator16 Digital meter display

TIG (GTAW) INVERTER


100% @ 150A


220 AC/DC1ph 230V Input, 220A Tig Inverter with HF Tig, Lift Tig, Stick, Digital Meters, 2T/4T Function, Up Slope/Down Slopewith Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control


10-9402 TA 220 AC/DC 220 Amp Inverter Power Source 2541.00with operating manual, primary cable and TIG plug (CO4025)


020218/MT Thermal Arc HD Inverter Cart 578.00020258/TH Thermal Arc HD Cooler TIG 1153.0010-9996 Remote Foot Control 7.6m lead+plug 298.00010330 RC01 10m Standard Remote Control 407.41C04025 5-Pin TIG Plug 32.5710-9840/F Remote Control Plug 91.4110-9997 50mm2 DINSE TIG Torch adapter 33.58304.090.404 SA.26.4 TIG Torch 103.07

1 4

1

PHASE

50HZ

60CC>>>> >>>>

2 3

8

7

9

65

1011

12

13 14

15

16

AC

DC>>>>

- 10 -

Machine SpecificationsMains Input Voltage 1ph. 230v Open Circuit Voltage 50 - 60VProtection Factor IP23 Warranty Period 2 Years

Features BenefitsSmart Logic® Eliminates damage if the machine is accidentally installed to the improper voltageThermal Overload Protection Alerts operator if duty cycle is exceeded or airflow is blocked with indicatorSimple to use Control Panel All functions and controls are easily set through robust easy to use push button switchesInterfaceAutomatic Arc Control For STICK welding - Automatically fine tunes the arc to prevent the electrode from sticking

and creating an inclusionRemote Receptacle Allows remote devices to be connected for controlling amperage and output contactorLift-Start TIG Provides TIG arc starting without use of high frequencyHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contaminationTIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage,

initial and final slope times and amperage control

Please note: To fit a 3 piece water cooled TIG torch to this unit you will need a 50mm2 DINSE type TIG torch adapter (part number 10-9997)

220150 SE150 SE220 AC/DC220 AC/DCWeldskill

WE

LD

ING

EQ

UIP

ME

NT

Please note: To fit a 3 piece water cooled TIG torch to this unit you will need a 50mm2 DINSE type TIG torch adapter(part number 10-9997)

TIG (GTAW) INVERTER


60% @ 300A


350 AC/DC3ph 400V Input, 350A Tig Inverter with HF Tig, Lift Tig, Stick, Digital Meters, 2T/4T Function, Up Slope/Down Slopewith Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control & IP &RPI Adjustment.


10-9403 TA 350 AC/DC 350 Amp Inverter Power Source 6435.00with HD Inverter Cart, HD Cooler TIG, mains cable, operating manual and TIG plug (C04025)

3

PHASE

50HZ

60CC>>>> >>>>AC

DC>>>>

- 11 -

Machine SpecificationsMains Input Voltage 3ph. 400v Open Circuit Voltage 57VProtection Factor IP23 Warranty Period 2 Years

Features BenefitsSmart Logic® Eliminates damage if the machine is accidentally installed to the improper voltageThermal Overload Protection Alerts operator if duty cycle is exceeded or airflow is blocked with indicatorSimple to use Control Panel All functions and controls are easily set through robust easy to use push button switchesInterface Automatic Arc Control For STICK welding - Automatically fine tunes the arc to prevent the electrode from sticking

and creating an inclusionRemote Receptacle Allows remote devices to be connected for controlling amperage and output contactorLift-Start TIG Provides TIG arc starting without use of high frequencyHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contaminationTIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage, initial

and final slope times and amperage controlIP Adjustment Adjusts the amperage value for the positive/cleaning cycle in AC welding, giving heat input

and bead control to the weld profileRPI Adjustment Adjusts the arc polarity to give precise arc ignition at the tungsten pointParameter memory settings Gives memory programmes which can easily be saved and recalled to give job settings to


Item DescriptionF1 Welding mode setting key «MMA»/«TIG 2 stroke»/«TIG 4 stroke»F2 SET UP setting keyF3 PULSE ON/OFF setting KeyF4 Low current adjustment setting keyF5 PULSE frequency adjustment setting keyF6 AC ON/OFF setting keyF7 AC frequency adjustment setting keyF8 Cleaning/penetration balance setting keyF9 Setting key for SETUP choice and for parameters: pregas, initial current, up-slope timeF10 Setting key for SETUP choice and for parameters: post gas duration, final currentF11 Digital displayF12 Digital displayF13 Knob for all parameters adjustmentF14 Knob for down slope time adjustmentF15 Indicator «MMA welding»F16 Indicator «2 stroke TIG welding»F17 Indicator «4 stroke TIG welding»F18 Indicator «current in A» displayed on F11F19 Indicator «value in %» displayed on F11F20 Indicator «time in s» displayed on F11F21 Indicator «frequency in Hz» displayed on F11

Item DescriptionF22 Indicator «dimension in mm» displayed on F11F23 Indicator «pre gas duration» in modificationF24 Indicator «initial current» in modificationF25 Indicator «up-slope time» in modificationF26 Indicator «PULSE mode» ONF27 Indicator «AC mode» ONF28 Indicator «final current» in modificationF29 Indicator «post gas duration» in modificationF30 Indicator main supply defaultF31 Indicator cooler unit default

OPTIONS AND ACCESSORIES020216/GT Thermal Arc HD Inverter Cart 562.00020255 Thermal Arc HD Cooler TIG 1189.0010-9996 Thermal Arc Remote Foot Control 7.6m lead and plug 298.00010330 Thermal Arc Remote Hand Control 10m RC01 407.41C04025 5 Pin TIG Plug 32.5710-9997 50mm2 DINSE TIG Torch adapter 33.58302.050.404 SA.18.4 TIG Torch 128.40

WE

LD

ING

EQ

UIP

ME

NT

INVERTER MIG (GMAW) MACHINE

Item Description1 Power Indicator2 Thermal Overload Indicator3 Digital Voltage Meter4 Push-Button Process Selection5 Push-Button Trigger Mode Control6 Variable Inductance Control7 Multifunction control - Infinitely

Variable Voltage / Down Slope / Arc Force Control

8 Amperage Control9 Digital Amperage Meter

Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net WeightW1003186 20% @ 180A 10 - 180 Amps 410 x 210 x 450mm 14.6 kg

Process MIG FLUX CORED MMA LIFT ARC TIG

FABRICATOR 181i1ph 230V Input, 180A Compact Mig & Multiprocess Inverter

Part No. Description List Price £ W1003186 Fabricator 181i Compact MIG Inverter with feed rolls for 0.6 - 0.8mm 930.00

kurled and hard wire and 1 - 1.2mm soft wire, gas hose, earth cable and clamp, mains cable, Tweco MIG Torch, electrode holder for MMA and operating manual


62020 0.6/0.8mm Hard Wire V groove feed roll 28.4662022 0.9/1.2mm Hard Wire V groove feed roll 28.4662179 0.8/1.0mm Soft Wire U groove feed roll 28.4662024 0.9/1.2mm Soft Wire U groove feed roll 28.4662028 0.8/0.9mm Cored Wire V knurl feed roll 28.4662023 1.2/1.6mm Cored Wire V knurl feed roll 28.46WS180XE-10-3035 Tweco Weldkill 180A MIG Torch, 3m 85.86310.050.002 17V Tig Torch with 4m Lead 115.32

- 12 -

Machine SpecificationsMains Input Voltage 1ph. 230v Generator Requirement 7 KVAWelding Current Range 10-180A Wire Drive Type 2 RollProtection Class IP23S Welding Output MIG 20% @ 180AWarranty Period 2 Years MMA 20% @ 175A

TIG 25% @ 175A

Features BenefitsVRD stands for Voltage Reduction Device, it reduces the

VRD OCV when the power supply is not in use. Eliminates the need for add on voltage reducers. (Field Capable)

Digital Meters Allows the operator to easily check and adjust parameters

Thermal Overload protection with Indicator Alerts operator if duty cycle is exceeded or airflow is blocked

Adjustable Burn Back Control Gives precise wire burn back for diameter of wire and good re-striking capability

Trigger Latching Facility Allows trigger to be released for continuous long weld runs in MIG and TIG modes

Reverse Polarity Facility Allows use of self shielding wires for outdoor applications

50mm Output Terminals Allows for easy polarity reversal and cable change

3

5

4

21

8

9

7

6

WE

LD

ING

EQ

UIP

ME

NT

MIG (GMAW) TRANSFORMER RECTIFIER MACHINE

Item Description

1 Thermal overload light2 Wire speed control3 Spot time control4 Output voltage switch5 Positive welding current terminal6 Torch polarity lead7 Negative welding current terminal8 Euro-kwik torch connection9 Spot mode switch10 Standby switch

Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight707079 13% @ 200A 30 - 200 Amps 770 x 410 x 830 mm 58 kg

30% @ 145A

Process MIG FLUX CORED

FABRICATOR 200 COMPACT1ph 230V Input, 200A Compact Mig Machine with 8 Voltage settings

Part No. Description List Price £707079 Fabricator 200 Machine with Work Lead, Wheeling Kit/Cylinder Tray, 861.00

gas hose, 0.6/0.8 Feed Roll and operating manual

OPTIONS AND ACCESSORIES62020 0.6/0.8mm Hard Wire V groove feed roll 28.4662179 0.8/1.0mm Soft Wire U groove feed roll 28.4662024 0.9/1.2mm Soft Wire U groove feed roll 28.4662028 0.8/0.9mm Cored Wire V knurl feed roll 28.4662023 1.2/1.6mm Cored Wire V knurl feed roll 28.46

WS220XE-10-3035 Tweco Weldkill 200A MIG Torch, 3m 94.34WS220XE-12-3035 Tweco Weldkill 200A MIG Torch, 3.6m 100.70

Machine Specifications Wire Feed System SpecificationsMains Input Voltage 1ph. 230v Wire Feed Speed Range 1 - 18 m/minArc Voltage Range 15 - 22v Wire Drive Type 2 RollVoltage Settings 8 Wire Diameter Range Hard Wire 0.6-0.8mmWarranty Period 3 Years Soft Wire 0.8-1.0mm

Cored Wire 0.6-1.2mm

1

PHASE

50HZ

60CV DC >>>> >>>>

>>>>OO

OO

}||{

- 13 -

Features BenefitsThermal Overload protection with Indicator Alerts operator if duty cycle is exceeded or airflow is

blockedReverse Polarity Facility Allows use of self shielding wires for outdoor

applicationsSpot Timer Control Consistently timed, uniform tack welds

WE

LD

ING

EQ

UIP

ME

NT


Item Description1 Standby Switch with Indicator Light2 Thermal Overload Warning Light3 Coarse Voltage Step Adjustment4 Fine voltage Step Adjustment5 Wire Feed Speed Control

Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight706114 50% @ 250A 30 - 250 Amps 800 x 355 x 850 mm 103 kg


FABRICATOR 250 COMPACT1ph 230V Input, 250A Compact Mig Machine with 16 Voltage settings

Part No. Description List Price £ 706114 Fabricator 250 Compact Machine complete with 1495.00

feed rolls for 0.6/1.0mm wire, gas hose, earth cable and clamp, mains cable and operating manual


62020 0.6/0.8mm Hard Wire V groove feed roll 28.4662022 0.9/1.2mm Hard Wire V groove feed roll 28.4662179 0.8/1.0mm Soft Wire U groove feed roll 28.4662024 0.9/1.2mm Soft Wire U groove feed roll 28.467977728 1.2/1.6mm Soft Wire U groove feed roll 28.4662028 0.8/0.9mm Cored Wire V knurl feed roll 28.4662023 1.2/1.6mm Cored Wire V knurl feed roll 28.46

WS220XE-10-3035 Tweco Weldkill 200A MIG Torch, 3m 94.34WS220XE-12-3035 Tweco Weldkill 200A MIG Torch, 3.6m 100.70

1

PHASE

50HZ

60CV DC >>>> >>>>

>>>>OO

OO

}||{

- 14 -

Machine Specifications Wire Feed System SpecificationsMains Input Voltage 1ph. 230v Wire Feed Speed Range 1 - 20 m/minArc Voltage Range 15 - 29v Wire Drive Type 2 RollVoltage Settings 16 Wire Diameter Range Hard Wire 0.6-1.0mmWarranty Period 2 Years Soft Wire 0.8-1.2mm

Cored Wire 0.8-1.2mmFeatures BenefitsThermal Overload protection with Indicator Alerts operator if duty cycle is exceeded or airflow is

blockedReverse Polarity Facility Allows use of self shielding wires for outdoor

applicationsSpot Timer Control Consistently timed, uniform tack weldsAdjustable Burn Back Control Gives precise wire burn back for diameter of wire and

good re-striking capabilityTrigger Latching Facility Allows trigger to be released for continuous long weld

runs

WE

LD

ING

EQ

UIP

ME

NT



Part Number Duty cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight706124 30% @ 330A 25 - 330 Amps 800 x 355 x 850 mm 85 kg706125 30% @ 330A 25 - 330 Amps 800 x 355 x 850 mm 102 kg

FABRICATOR 330 COMPACT and SEPARATEwith VF2C Wire Feed Unit3ph 220/380/400V Input, 330A Mig Machine with 24 Voltage settingsand Digital Meters

Part No. Description List Price £ 706124 Fabricator 330 Compact Machine complete with feed rolls for 0.6/1.2mm wire, 1636.00

gas hose, earth cable and clamp, mains cable and operating manual706125 Fabricator 330 Separate complete with VF2c roll feeder, 8m connecting cable, 1985.00

feed rolls for 0.6/1.2mm wire, gas hose, earth cable and clamp, mains cable and operating manual

List £

705975 Wire feeder swivel base 140.63704913 Wire feeder trolley 88.19705900 8m interconnecting ext. cable 350.92705948 Spool Cover 80.00

3

PHASE

50HZ

60CV DC >>>> >>>>

>>>>OO

OO

}||{

List £

62020 0.6/0.8mm Hard Wire V groove feed roll 28.4662022 0.9/1.2mm Hard Wire V groove feed roll 28.4662179 0.8/1.0mm Soft Wire U groove feed roll 28.4662024 0.9/1.2mm Soft Wire U groove feed roll 28.467977728 1.2/1.6mm Soft Wire U groove feed roll 28.4662028 0.8/0.9mm Cored Wire V knurl feed roll 28.4662023 1.2/1.6mm Cored Wire V knurl feed roll 28.46

- 15 -

Item Description1 Standby Switch with Indicator Light2 Thermal Overload Warning Light3 Coarse Voltage Step Adjustment4 Fine voltage Step Adjustment5 Wire Feed Speed Control

Machine Specifications Wire Feed System SpecificationsMains Input Voltage 3ph. 220/380/400v Wire Feed Speed Range 1 - 20 m/minArc Voltage Range 16 - 29v Wire Drive Type 2 RollVoltage Settings 24 Wire Diameter Range Hard Wire 0.6-1.2mmWarranty Period 2 Years Soft Wire 0.9-1.6mm



Features BenefitsThermal Overload protection with Indicator Alerts operator if duty cycle is exceeded or airflow is blockedReverse Polarity Facility Allows use of self shielding wires for outdoor applicationsSpot Timer Control (Compact model only) Consistently timed, uniform tack weldsStitch Timer Control (Compact model only) Allows operator to set dedicated on/off times to produce

uniform short runsAdjustable Burn Back Control Gives precise wire burn back for diameter of wire and good

re-striking capabilityTrigger Latching Facility Allows trigger to be released for continuous long weld runs

Recommended Torches161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 153.15161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 161.66161.560.457 TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A) 168.74

WE

LD

ING

EQ

UIP

ME

NT



Item Description

1 Thermal overload warning light2 Digital meters3 control knob4 Cold wire inch5 Gas purge6 Mode selector7 Secondary parameter settings button


FABRICATOR 400II SEPARATE WITH VF4ECII WIRE FEED UNIT3ph 400V Input, 400A separate Mig Machine with 20 Voltage settings, Digital Meters, microprocessor control


10-9405 Fabricator 400A Remote system with 1m interconnection, 1.0/1.2 mm 2299.00drive rolls, Earth cable & clamp, feeder wheel kit, mains cable and operating manual

3

PHASE

50HZ

60CV DC >>>> >>>>

>>>>

2

OO

OO

}||{

List £

VM0263 1m Interconnecting cable assy a/c 151.80VM0266 5m Interconnecting cable assy a/c 196.78VM0267 10m Interconnecting cable assy a/c 359.832187 0.6/0.8mm Hard Wire V Groove Feed Roll 36.552189 1.0/1.2mm Hard Wire V Groove Feed Roll 36.552511 1.2/1.6mm Hard Wire V Groove Feed Roll 36.55

List £

2269 10/1.2mm Soft Wire U Groove Feed Roll 36.552316 1.2/1.6mm Soft Wire U Groove Feed Roll 36.552513 1.6/2.0mm Soft Wire U Groove Feed Roll 36.552319 1.0/1.2mm Cored Wire V Groove Feed Roll 36.552321 1.2/1.6mm Cored Wire V Groove Feed Roll 36.55

5

6

Machine Specifications Wire Feed System SpecificationsMains Input Voltage 3ph 400v Wire Feed Speed Range 1-19m/minArc Voltage Range 19.9V - 46.6v Wire Drive Type 4 Roll GearedProtection Factor IP 21 Wire Diameter Range Hard Wire 0.6-1.2mmWarranty Period 2 Years Soft Wire 0.8-1.2mm



Please note: The wire feed unit is a four roll system, therefore two of any of the above drive rolls are required to complete one set - 16 -

3

4

Features BenefitsThermal Overload protection with Indicator Alerts operator if duty cycle is exceeded or airflow is blockedSpot Timer Control Allows trigger to time out to give uniform tacks Stitch Timer Control Allows operator to set dedicated on/off times to produce uniform short runsAdjustable Burn Back Control Gives precise wire burn back for diameter of wire and good re-striking

capabilityTrigger Latching Facility Allows trigger to be released for continuous long weld runsElectronic feedback of wire speed Constant wire feed speedVoltage and amp meters at wfu Allows operator to see parameters at working areaPre + post gas control Allows operator to change pre + post gas times to suit applicationsInitial Speed Control Allows operator to change initial wire speed time for soft start applications

1

7

400


WE

LD

ING

EQ

UIP

ME

NT



Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight

10-9406 60% @ 400A 40 - 520 Amps 1400 x 470 x 770 mm 165 kg

FABRICATOR 450II SEPARATE WITH VFE4CII WIRE FEED UNIT 3ph 400V Input, 520A separate Mig Machine with 30 Voltage settings, Digital Meters, microprocessor control

Part No. Description List Price £10-9406 Fabricator 450A Separate system with 1m interconnection A/C, 1.0/1.2 mm 3365.00

drive rolls, Earth cable & clamp, feeder wheel kit, mains cable and operating manual

3

PHASE

50HZ

60CV DC >>>> >>>>

>>>>OO

OO

}||{

Machine Specifications Wire Feed System SpecificationsMains Input Voltage 3ph 400 Wire Feed Speed Range 1-19m/min Arc Voltage Range 19.5V - 56V Wire Drive Type 4 Roll GearedProtection Factor IP 21 Wire Diameter Range Hard Wire 0.6 - 1.6mmWarranty Period 2 Years Soft Wire 0.8 - 1.6mm

Cored Wire 0.8 - 1.6mm


- 17 -

Features BenefitsThermal Overload protection with Indicator Alerts operator if duty cycle is exceeded or airflow is blockedSpot Timer Control Allows trigger to time out to give uniform tacks Stitch Timer Control Allows operator to set dedicated on/off times to produce uniform short runsAdjustable Burn Back Control Gives precise wire burn back for diameter of wire and good re-striking

capabilityTrigger Latching Facility Allows trigger to be released for continuous long weld runsElectronic feedback of wire speed Constant wire feed speedVoltage and amp meters at wfu Allows operator to see parameters at working areaPre + post gas control Allows operator to change pre + post gas times to suit applicationsInitial Speed Control Allows operator to change initial wire speed time for soft start applicationsWater Cooler system protection Torch will not burn out if no water flow at coolerEasy fit water cooler Allows easy conversion from air cooled to water cooled

Item Description

1 Water cooler warning light2 Thermal overload warning light3 Digital meters4 control knob5 Cold wire inch6 Gas purge7 Mode selector8 Secondary parameter settings button

1

3

6

7

Please note: The wire feed unit is a four roll system, therefore two of anyof the above drive rolls are required to complete one set

4

5

2

8

List £

A.0014-OA Water Cooler w/flow sensor c/w fittings 708.19VM0264 1m Interconnecting cable assy w/c 179.91VM0265 5m Interconnecting cable assy w/c 269.87VM0268 10m Interconnecting cable assy w/c 461.02VM0263 1m Interconnecting cable assy a/c 151.80VM0266 5m Interconnecting cable assy a/c 196.78VM0267 10m Interconnecting cable assy a/c 359.83

List £

2187 0.6/0.8mm Hard Wire V Groove Feed Roll 36.552189 1.0/1.2mm Hard Wire V Groove Feed Roll 36.552511 1.2/1.6mm Hard Wire V Groove Feed Roll 36.552269 10/1.2mm Soft Wire U Groove Feed Roll 36.552316 1.2/1.6mm Soft Wire U Groove Feed Roll 36.552513 1.6/2.0mm Soft Wire U Groove Feed Roll 36.552319 1.0/1.2mm Cored Wire V Groove Feed Roll 36.552321 1.2/1.6mm Cored Wire V Groove Feed Roll 36.55

450


WE

LD

ING

EQ

UIP

ME

NT

SYNERGIC MIG PULSE INVERTER

POWERMASTER PLUS 320SP

Air Cooled System

3ph 400v Input, 320A Digital Control Synergic MIG Compact System


W1000103PP 320A PowerMaster Mobile Power Source 6265.00complete with 1.0mm/1.2mm V drive rollers, gas hose and operating manual

W4000000 Remote Control RC 20 255.00W4011601 TIG Kit 489.13W4001301 Water Recirculator 1218.90W4000300 Thermal Arc Inverter Cart 504.90

Recommended Torches161.628.307 TWECO DSA MIG Digital Air Cooled Torch 400A 3m 307.40161.628.407 TWECO DSA MIG Digital Air Cooled Torch 400A 4m 339.20161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 153.15161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 161.66161.560.457 TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A) 168.74ML3600PM Digital Push-pull torch 8m Air Cooled 2154.00


FEED ROLLS List £ List £

74238 0.6/0.8mm Hard Wire V Groove 36.18 74796 1.0/1.2mm Soft Wire U Groove 36.1874129 0.8/1.0mm Hard Wire V Groove 36.18 74797 1.2/1.6mm Soft Wire U Groove 36.1874109 1.0/1.2mm Hard Wire V Groove 36.18 7977734 0.8/0.9mm Cored Wire V Knurl 36.1874102 1.2/1.6mm Hard Wire V Groove 36.18 74291 1.2/1.6mm Cored Wire V Knurl 36.1874107 0.8/0.9mm Soft Wire U Groove 36.18 7977372 1.6/2.4mm Cored Wire V Knurl 36.18

Increases welding speed by up to 30%Single pass butt welds possible up to 12 mm in thicknessIncreased penetration compared to standard systemsReduced risk of undercut

100 Programmes accessible from MIG torch Ensuring fast and flexible controlSynergic One Knob Control Arc energy matched to wire feed speed to give excellent

welding conditionsTwin Pulse (pulse on pulse) welding TIG quality welds at MIG speeds ideally suited to thin

gauge materialHeavy Duty, Tough Case design Enabling machine to withstand rigor of every day useMicro processor control with digital display User friendly with all parameters - programmes easily

viewedHigh efficiency inverter design Giving precise arc characteristics at low running costsSpatter free in majority of welding applications Less clean up time, aesthetically pleasing weld appearance

Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight

W1000103PP 60% @ 320A 5 - 320 Amps 498 x 340 x 745 mm 35 kg100% @ 280A

Process MIG FCAW MMAW

- 18 -

Machine Specifications Wire Feed System SpecificationsMains Input Voltage 3ph. 400v Wire Feed Speed Range 0.1 - 25 m/minArc Voltage Range 15.2 - 30v Wire Drive Type 4 RollProtection Class IP23 Wire Diameter Range Hard Wire 0.6-1.6mmWarranty Period 3 Years Soft Wire 0.8-1.6mm


Features Benefits

PowerMaster Plus

PowerMaster Plus

PLUS =

FASTER...

SMOOTHER...

BETTER...

PLUS =

FASTER...

SMOOTHER...

BETTER...

WE

LD

ING

EQ

UIP

ME

NT



Air Cooled System

3ph 400v Input, 400A Digital Control Synergic MIG Separate System

W4000100 Remote Control HR 911 706.49W4011600 TIG Kit 339.24W4001000 Swivel Unit 127.40W4000503 5m 70mm Air-Cooled Interconnection 384.00W4000401 10m 70mm Air-Cooled Interconnection 514.00W4000606 20m 95mm Air- and Water-Cooled Interconnection 1080.00Recommended Torches161.628.307 TWECO DSA MIG Digital Air Cooled Torch 400A 3m 307.40161.628.407 TWECO DSA MIG Digital Air Cooled Torch 400A 4m 339.20ML3600PM Digital Push-pull torch 8m Air Cooled 2154.00161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 153.15161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 161.66161.560.457 TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A) 168.74FEED ROLLS List £ List £



W1000303PP 400A PowerMaster Power Source Air Cooled 6205.00W3000103 4 Roll Workshop Wire Feeder Air Cooled complete with 1.0/1.2mm V drive rollers 1795.00W4000400 1m 70mm Air-Cooled Interconnection 238.00

BASIC PACKAGE COMPONENTS

- 19 -




Features Benefits

Process MIG FCAW MMAWDuty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight

60% @ 400A 5 - 400 Amps 855 x 445 x 1116 mm 112 kg100% @ 350A






PowerMaster Plus

PowerMaster Plus

PLUS =

FASTER...

SMOOTHER...

BETTER...

WE

LD

ING

EQ

UIP

ME

NT



Water Cooled System


W4000100 Remote Control HR 911 706.49W4011600 TIG Kit 339.24W4001000 Swivel Unit 127.40W4000503 5m 70mm Water-Cooled Interconnection 384.00W4000501 10m 70mm Water-Cooled Interconnection 540.00W4000606 20m 95mm Water-Cooled Interconnection 1080.00Recommended Torches160.620.307 TWECO DSW MIG Digital Water Cooled Torch 500A 3m 479.12160.620.407 TWECO DSW MIG Digital Water Cooled Torch 500A 4m 524.70MW5400PM Digital Push-Pull torch 8m Water Cooled 2212.00W4001500 Push-Pull Control Board 241.34552.316.307 SW450.3F 450A Water-Cooled MIG Torch, 3m (60% @ 450A) 292.36552.316.407 SW450.4F 450A Water-Cooled MIG Torch, 4m (60% @ 450A) 312.29





W1000203PP 400A PowerMaster Power Source with Integrated Water Cooler 7210.00W3000203 4 Roll Workshop Wire Feeder Water Cooled complete with 1.0/1.2mm V drive rollers 1917.00W4000500 1m 70mm Water-Cooled Interconnection 261.00


- 20-



Features BenefitsIncreases welding speed by up to 30%Single pass butt welds possible up to 12 mm in thicknessIncreased penetration compared to standard systemsReduced risk of undercut





PowerMaster Plus

PowerMaster Plus


60% @ 400A 5 - 400 Amps 855 x 445 x 1116 mm 112 kg100% @ 350A

PLUS =

FASTER...

SMOOTHER...

BETTER...

WE

LD

ING

EQ

UIP

ME

NT



Water Cooled System


W4000100 Remote Control HR 911 706.49W4011600 TIG Kit 339.24W4001000 Swivel Unit 127.40W4000607 5m 95mm Water-Cooled Interconnection 421.00W4000601 10m 95mm Water-Cooled Interconnection 600.00W4000606 20m 95mm Water-Cooled Interconnection 1080.00Recommended Torches160.620.307 TWECO DSW MIG Digital Water Cooled Torch 500A 3m 479.12160.620.407 TWECO DSW MIG Digital Water Cooled Torch 500A 4m 524.70MW5400PM Digital Push-Pull torch 8m Water Cooled 2212.00



W1000503PP 500A PowerMaster Power Source with Integrated Water Cooler 8070.00W3000203 4 Roll Workshop Wire Feeder Water Cooled complete with 1.0/1.2mm V drive rollers 1917.00W4000600 1m 95mm Water-Cooled Interconnection 277.00


- 21 -



Features Benefits








PowerMaster Plus

PowerMaster Plus


100% @ 500A 5 - 500 Amps 855 x 445 x 1116 mm 121 kg

PLUS =

FASTER...

SMOOTHER...

BETTER...

WE

LD

ING

EQ

UIP

ME

NT


POWERMASTER PLUS 400SP ROBOTIC PACKAGE

Water Cooled System

3ph 400v Input, 400A Digital Control Synergic MIG Separate System withintegrated cooler, remote control pendant HR911, 42 pin 10m robot interfacecable

W4000100 Remote Control HR 911 706.49W4000800 42 pin plug for robot interface cable 253.77 W4000700 10m robot control cable (includes W4000800) 407.22



W1000403PP 400A PowerMaster Power Source with Integrated Water Cooler, 10240.00Remote Control Pendant HR911, 42 pin 10m Robot Interface Cable

W3000303 4 Roll SP4000R Robotic Wire Feeder complete with 1.0/1.2mm V drive rolls 1555.00W4000502 10m 70mm Water-Cooled Robotic Interconnection 538.56


- 22 -



Features Benefits

PowerMaster Plus


Synergic One Knob Control Arc energy matched to wire feed speed to give excellent welding conditions

Twin Pulse (pulse on pulse) welding TIG quality welds at MIG speeds ideally suited to thin gauge material

Heavy Duty, Tough Case design Enabling machine to withstand rigor of every day useMicro processor control with digital display User friendly with all parameters - programmes easily


PowerMaster Plus




50% @ 400A 5 - 400 Amps 855 x 445 x 1116 mm 112 kg100% @ 320A

PLUS =

FASTER...

SMOOTHER...

BETTER...

WE

LD

ING

EQ

UIP

ME

NT


POWERMASTER PLUS 500SP ROBOTIC PACKAGE

Water Cooled System

3ph 400v Input, 500A Digital Control Synergic MIG Separate System withintegrated cooler, remote control pendant HR911, 42 pin 10m robot interfacecable



W1000603PP 500A PowerMaster Power Source with Integrated Water Cooler 10765.00W3000303 4 Roll SP4000R Robotic Wire Feeder complete with 1.0/1.2mm V drive rolls 1555.00W4000602 10m 90mm Interconnection 590.58


- 23 -



Features Benefits

PowerMaster Plus


Synergic One Knob Control Arc energy matched to wire feed speed to give excellent welding conditions

Twin Pulse (pulse on pulse) welding TIG quality welds at MIG speeds ideally suited to thin gauge material

Heavy Duty, Tough Case design Enabling machine to withstand rigor of every day useMicro processor control with digital display User friendly with all parameters - programmes easily


PowerMaster Plus

W4000100 Remote Control HR 911 706.49W4000800 42 pin plug for robot interface cable 253.77 W4000700 10m robot control cable (includes W4000800) 407.22




60% @ 500A 5 - 500 Amps 855 x 445 x 1116 mm 121 kg100% @ 400A

WE

LD

ING

EQ

UIP

ME

NT

DIGITAL TORCHES - DSA.40


161.628.307 TWECO DSA MIG Digital Air Cooled Torch 400A 3m 307.40161.628.407 TWECO DSA MIG Digital Air Cooled Torch 400A 4m 339.20

ML3600PM Push Pull Torch 8m Air Cooled 2154.00This torch includes all boards and sockets required to fit to the PowerMaster machines

- 24 -

AIR COOLED

Standard Consumables

Conductor Tube116103510 Conductor Tube with Insulator POR

Nozzles 23-50 Insulated Fixed Nozzle 12.7mm 10.4323-62 Insulated Fixed Nozzle 15.9mm (fitted as standard) 10.4323-75 Insulated Fixed Nozzle 19.1mm 10.43

Contact Tips14H-35 Contact Tip 0.8mm 0.9614H-40 Contact Tip 1.0mm 0.9614H-45 Contact Tip 1.2mm 0.9614H-52 Contact Tip 1.3mm (fitted as standard) 0.9614H-116 Contact Tip 1.6mm 0.96

Diffusers54A Gas Diffuser 3.14

Liners134090402 4m Liner for all wires 1.2-1.6mm Carbo (supplied as standard) 12.35S129.5.44.115 Liner Guide, 115mm 7.37

by

WE

LD

ING

EQ

UIP

ME

NT

DIGITAL TORCHES = DSW.300 / DSW.450


160.610.307 TWECO DSW MIG Digital Water Cooled Torch 300A 3m 405.98160.610.407 TWECO DSW MIG Digital Water Cooled Torch 300A 4m 442.02160.620.307 TWECO DSW MIG Digital Water Cooled Torch 500A 3m 479.12160.620.407 TWECO DSW MIG Digital Water Cooled Torch 500A 4m 524.70

MW5400PM Push Pull Torch 8m Water Cooled 2212.00This torch includes all boards and sockets required to fit to the PowerMaster machines

- 25 -

WATER COOLED

Standard Consumables

Conductor TubeSW63-50 Conductor Tube Assembly (300A) 93.80116116104 Conductor Tube Assembly (500A) POR

Nozzles 300ASW23-15 15mm Nozzle (fitted as standard) 8.38SW23-12 12mm Nozzle 8.38SW23-18 18mm Nozzle 8.38500ASW24-17 Nozzle (500A) (fitted as standard) 8.65SW24-15 15mm Nozzle 8.65SW24-21 21mm Nozzle 8.65

Contact Tips300A14H-35 Contact Tip 0.8mm 0.9614H-40 Contact Tip 1.0mm 0.9614H-45 Contact Tip 1.2mm 0.9614H-52 Contact Tip 1.3mm (fitted as standard) 0.96500A16S-35 Contact Tip 0.8mm 1.3116S-40 Contact Tip 1.0mm 1.3116S-45 Contact Tip 1.2mm 1.3116S-52 Contact Tip 1.3mm (fitted as standard) 1.3116S-116 Contact Tip 1.6mm 1.3116S-564 Contact Tip 2.0mm 1.31

DiffusersSW53-14 Diffuser (300A) 5.95SW54-16S Diffuser (500A) 5.24

Liners134090402 4m Liner for all wires 1.2-1.6mm Carbo (supplied as standard) 12.35S129.5.44.115 Liner Guide, 115mm 7.37

by

WE

LD

ING

EQ

UIP

ME

NT

Item Description1 VRD- (Voltage Reduction Device) lights indicate on or off2 STICK/MIG Parameters - Pressing this button scrolls through the

STICK functions or MIG functions3 Digital LED display - welding amperage and voltage or parameter

values are displayed in these windows. Internal warnings are signalled to the operator

4 Save/Load Buttons - By using the Save & Load buttons the operatorcan easily save up to 5 welding programmes

5 Control knob - allows the operator voltage within the entire range of the power source, also used to set each parameter value

6 Process functions - pressing this button scrolls through the output process modes (STICK, Lift TIG, MIG)

7 Remote current function - pressing this button enables remote current

8 Remote contactor function - pressing this button enables remote contactor one or off

TIG (GTAW) INVERTER



ARCMASTER 400 MST3ph 380/415V Input, 400A Multi Process Inverter with Mig, Lift Tig and Stick facility


10-3089 TA 400 MST 400 Amp DC CC/CV Multi Process Inverter 3350.00

1

2

3

PHASE

50HZ

60

CC

CV

DC>>>> >>>>>>>>

3 4

6

5

- 26 -


10-2007 Remote Foot control 7.6m lead and plug 378.0310-2005 Remote Hand Pendant 7.6m lead and plug 249.0110-2096 14 Pin Plug for Remote or TIG Torch Button 45.7910-2097 Cable Clamp for 14 Pin Plug 7.67CRT.ARCM3.1 ArcMaster 3.1 Workshop Cart 422.00WC.ARCM3.1 ArcMaster Cooler 1080.00TIG/HF400A 400A TIG HF Box (see page 27 for details) 1799.00030104-A-SPTH Wire Feed Unit (see page 28 for details) 1250.00

Machine SpecificationsMains Input Voltage 3ph. 380/415v Open Circuit Voltage 65VProtection Factor IP23S Warranty Period 3 Years

Features BenefitsSmart Logic® Eliminates damage if the machine is accidentally installed to the improper voltageThermal Overload Protection Alerts operator if duty cycle is exceeded or airflow is blocked with indicatorSimple to use Control Panel All functions and controls are easily set through robust easy to use push buttonInterface switchesRemote Receptacle Allows remote devices to be connected for controlling amperage and output contactorWarning Circuitry Alerts operator of power supply abnormalitiesVRD VRD stands for Voltage Reduction Device, it reduces the OCV when the power supply

is not in use. Eliminates the need for add on voltage reducers. (Field Capable)Programmable Allowing for 5 welding programmes to be saved for maximum flexibility as standard

featuresLift-Start TIG Provides TIG arc starting without use of high frequencyHot Start For STICK welding - Provides ease of arc starts

67

8

WE

LD

ING

EQ

UIP

ME

NT

400A HF TIG BOX

For Use with 400 MST


TIG/HF400A 400A HF TIG Box complete with operating manual, TIG Plug (10-2096) 1799.00and Cable Clamp (10-2097)


5M-TIG/HF-LEAD 5m Control Cable c/w 14 Pin Amphenols 162.1510M-TIG/HF-LEAD 10m Control Cable c/w 14 Pin Amphenols 185.3015M-TIG/HF-LEAD 15m Control Cable c/w 14 Pin Amphenols 208.4810-2007 Remote Foot control 7.6m lead and plug 378.0310-2005 Remote Hand Pendant 7.6m lead and plug 249.0110-2096 14 Pin Plug for Remote or TIG Torch Button 45.7910-2097 Cable Clamp for 14 Pin Plug 7.67Machine SpecificationsWelding Voltage input range 10 – 100V DC HF Output Voltage 6 KVInput Voltage 24V AC 1.2A (supplied from Power supply via 14pin socket)Protection Factor IP22Warranty Period 3 Years

Features BenefitsFast Clean HF Arc Starting Perfect TIG starts every timeDigital Meter Easily read amperage from a distancePrecise Amperage Control Allows operator to set exactly desired amperage for TIG and MMAPreview Set Current Allows operator to precisely set desired amps in TIG mode prior to weldingSimple to use Control Panel Allows operator to set all functions, up slope, down slope and post flow easily with

all controls in secondsInbuilt Gas Flow Control Allows operator to set precise gas flow at control panelLocal Remote Facility Allows switching for local to remote amperage control for use with hand pendant,

foot control or on torch current controlTorch Trigger Latching Allows torch trigger latching (4T) or standard on/off trigger function (2T).TIG MMA Switch Selects either TIG welding with all functions or MMA welding through the TIG boxDual TIG Torch Connectors Allows use of mono or dual cable TIG torchesPortability One of the smallest/lightest in its class allowing operator to easily transport to

difficult areasDesigned for Site Use Panel lid overhang ensures protection of control dials

- 27 -

Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net WeightTIG/HF400A 200A @ 60% TIG / 10 – 400Amps DC 240 x 204 x 325 mm 10.3kg

400A @ 25% STICK

Process HF TIG

Item Description1 TIG/MMA switch 2 Latch / norm switch3 Upslope control4 Downslope control5 Amps control6 Local remote switch7 Ammeter8 Post flow control9 Work socket10 Tig torch connectors11 Remote 14 pin socket12 Amps preset13 Gas flow control

12

3

4

5

67

8

9

1011

12

13

WE

LD

ING

EQ

UIP

ME

NT

400 MST Wire Feed UnitWorkshop style WFU suitable for 400MST. 4 roll drive system suitable forlight and heavy duty applications


030104-A-SPTH 4 Roll Wire Feed Unit for Arcmaster 400 MST 1250.00fitted with 1.0 - 1.2mm feed rolls


5MAC-MSTFD-LEAD 5m Air cooled interconnect 400MST 288.8910MAC-MSTFD-LEAD 10m Air cooled interconnect 400MST 384.135MWC-MSTFD-LEAD 5m Water cooled interconnect 400MST 339.6810MWC-MSTFD-LEAD 10m Water cooled interconnect 400MST 447.62

U450810AC 0.8 / 1.0mm Hard Wire V groove feed roll 70.00U451012AC 1.0 / 1.2mm Hard Wire V groove feed roll 70.00U451216AC 1.2 / 1.6mm Hard Wire V groove feed roll 70.00U451012AL 1.0 / 1.2mm Soft Wire U groove feed roll 70.00U451216AL 1.2 / 1.6mm Soft Wire U groove feed roll 70.00U451216FR 1.2 / 1.6mm Cored Wire groove feed roll 70.00

- 28 -

Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight030104-A-SPTH 400A @ 25% MIG 5 – 400Amps 460 x 279 x 568 mm 15kg

Process MIG

Wire Feed System SpecificationsWire Feed Speed Range 1 - 20 m/minWire Drive Type 4 RollWire Diameter Range Hard Wire 0.8-1.6mm

Soft Wire 1.0-1.6mm

Features Benefits4 Roll Drive System Smooth and reliable wire feed systemRemote Voltage Control Allows adjustment of power source arc voltage from the wire feederRemote Wire Speed Control Allows adjustment ofwire speed from the wire feederEnclosed Spool Prevents wire contamination and enables use in dirty envirnonmentsGun Trigger Hold (2T/4T) Allows standard or latched gun trigger

Item Description1 Wirespeed Control2 Welding Voltage Control3 Voltage Control Switch4 Connections for Water-Cooled MIG

Gun5 MIG Torch Euro Adaptor

1 2

3

4

5

WE

LD

ING

EQ

UIP

ME

NT

Item Description1 Main control knob for adjustment of output current,

wire feed speed and touch pad key functions2 Control knob for adjustment of output voltage and

down slope time3 Control knob for adjustment of inductance4 Selection key for Gas purge, cold wire inch and burn

back functions5 Selection key for 2/4 stroke welding mode, intermittent

MIG welding and spot MIG welding6 Selection key for welding modes, TIG, MIG and Stick

MIG (GMA) TIG (GTAW) STICK (SMAW) INVERTER


60% @ 170A

Process MIG LIFT TIG STICK

220 GMS 1ph 230V Input, 220A Compact Multi Process Inverter with 15kg Mig, Lift Tig,Stick


10-9330 TA 220 GMS Compact 220 Amp MIG Inverter with Stick and Lift TIG facility 2108.00with 0.6/0.8mm feed roll (U45806), mains cable and operating manual

OPTIONS AND ACCESSORIES020212/SA Universal Trolley 357.002187 0.6/0.8mm Hard Wire V groove feed roll 36.552189 1.0/1.2mm Hard Wire V groove feed roll 36.552269 1.0/1.2mm Soft Wire U groove feed roll 36.55304.080.407 SA.17.4 4m Euro-kwik connector style TIG torch 120.49304.080.807 SA.17.8 8m Euro-kwik connector style TIG torch 145.43WS220XE-10-3035 Tweco Weldkill 200A MIG Torch, 3m 94.34WS220XE-12-3035 Tweco Weldkill 200A MIG Torch, 3.6m 100.70

1

4

1

PHASE

50HZ

60CC/CV>>>> >>>>

23

5

DC >>>>

- 29 -

6

Machine Specifications Wire Feed System SpecificationsMains Input Voltage 1ph. 230v Wire Feed Speed Range 1 - 15 m/minArc Voltage Range Variable Wire Drive Type 2 RollProtection Class IP23 Wire Diameter Range Hard Wire 0.6-1.0mmWarranty Period 2 Years Soft Wire 0.6-1.0mm

Features BenefitsThermal Overload protection with Indicator Alerts operator if duty cycle is exceeded or airflow is blockedReverse Polarity Facility Allows use of self shielding wires for outdoor applicationsSpot Timer Control Allows trigger to time out to give uniform tacksStitch Timer Control Allows operator to set dedicated on/off times to produce uniform short

runsAdjustable Burn Back Control Gives precise wire burn back for diameter of wire and good re-striking

capabilityTrigger Latching Facility Allows trigger to be released for continuous long weld runsVariable Voltage Control Gives precise adjustment of output voltage to give control of heat inputVariable Inductance Control Gives arc transfer adjustment to improve weld quality and significantly

reduce spatter

WE

LD

ING

EQ

UIP

ME

NT

Item DescriptionF1 Setting key for ‘Load’ program F12 Power supply fault indicatorF2 Setting key for ‘Save’ program F13 Water cooling fault indicatorF3 Voltage adjustment knob F14 m/min indicator on ‘10’ displayF4 ’Seconds’ indicator on ‘9’ display F15 TIG welding indicatorF5 Setting key for ‘set up’ program F16 WFS adjustment knobF6 ‘Set up’ program indicator F17 MIG welding indicatorF7 ‘Volt’ indicator on ‘9’ display F18 Setting key for welding modeF8 ‘%’ indicator on ‘9’ display F19 Setting key for 2/4 strokeF9 Digital display F20 MMA welding indicatorF10 Digital display F21 Indicator 4 strokes weldingF11 ‘Amps’ indicator on ‘10’ display



60% @ 260A


300 GMS 3ph 400V Input, 300A Digital Mig Inverter in compact design with variablevoltage and inductance control and full waveform set up features withmemory for Mig, Lift Tig & Stick.


10-9407 TA 300 GMS Digital Mig Inverter with 1.0/1.2 solid wire drive rolls, 3027.00mains cable & Operating manual

OPTIONS AND ACCESSORIES020212/SA Universal Trolley 357.002187 0.6/0.8mm Hard Wire V groove feed roll 36.552189 1.0/1.2mm Hard Wire V groove feed roll 36.552269 1.0/1.2mm Soft Wire U groove feed roll 36.552319 1.0/1.2mm Cored Wire groove feed roll 36.55304.090.407 SA.26.4 4m Euro-kwik connector style TIG torch 168.68304.090.807 SA.26.8 8m Euro-kwik connector style TIG torch 191.81161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 153.15161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 161.66161.560.457 TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A) 168.74

3

PHASE

50HZ

60CC/CV>>>> >>>>DC >>>>

- 30 -

Machine Specifications Wire Feed System SpecificationsMains Input Voltage 3ph. 400v Wire Feed Speed Range 1 - 18 m/minArc Voltage Range Variable Wire Drive Type 4 RollProtection Class IP23 Wire Diameter Range Hard Wire 0.6-1.2mmWarranty Period 2 Years Soft Wire 0.8-1.2mmFeatures BenefitsThermal Overload protection with Indicator Alerts operator if duty cycle is exceeded or airflow is blockedReverse Polarity Facility Allows use of self shielding wires for outdoor applicationsSpot Timer Control Allows trigger to time out to give uniform tacksStitch Timer Control Allows operator to set dedicated on/off times to produce uniform short runsAdjustable Burn Back Control Gives precise wire burn back for diameter of wire and good re-striking

capabilityTrigger Latching Facility Allows trigger to be released for continuous long weld runsVariable Voltage Control Gives precise adjustment of output voltage to give control of heat inputVariable Inductance Control Gives inductance adjustment from 0 - 100% for complete control of Arc

transfer to improve weld quality and significantly reduce spatterDigital signal motor drive Gives precise and consistent wire feeding for full operator controlMemory Storage Allows 25 programmes for full parameter and settings to be saved and easily

set up on the unit

F10 F9F11F12

F13F14

F16

F17F18 F15

F19F20

F21

F3

F4

F2

F1

F8F7 F6

F5

WE

LD

ING

EQ

UIP

ME

NT


Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight10-9408 40% @ 400A 3 - 400 Amps PS: 460 x 279 x 716 mm 49 kg

100% @ 300A WFU: 460 x 279 x 568 mm


400 GMS 3ph 400V Input, 400A Digital Mig Inverter with separate Wire Feederfeaturing variable voltage and inductance control and full waveform set upfeatures with memory for Mig, Lift Tig & Stick.


10-9408 TA 400 GMS Digital Mig Inverter with separate wire feed unit, 4433.002m interconnection cable,1.0/1.2 solid wire drive rolls, mains cable & Operating manual

3

PHASE

50HZ

60CC/CV>>>> >>>>DC >>>>

- 31 -

Machine Specifications Wire Feed System SpecificationsMains Input Voltage 3ph. 400v Wire Feed Speed Range 1 - 20 m/minArc Voltage Range Variable Wire Drive Type 4 RollProtection Class IP23 Wire Diameter Range Hard Wire 0.8-1.6mmWarranty Period 2 Years Soft Wire 1.0-1.6mm

Features BenefitsWater Cooling Indicator When water cooled indicates when level is low, protecting mig torch Thermal Overload Indicator Alerts operator if duty cycle is exceeded or airflow is blocked.Reverse Polarity Facility Enables use of various flux cored wiresSpot Time Allows trigger to time out to give uniform tacksStitch Time Allows operator to set times to produce uniform short runsBurn Back Gives wire burn back times for different wire materials Trigger Latch Allows trigger to be released for continuous weldingVariable Voltage Gives precise control of output voltageVariable inductance Gives adjustment to arc transfer improving arc stability

OPTIONS AND ACCESSORIES020214-GT Trolley 785.00030372-500-2-A/TH 2M W/C Interconnection Cable 440.00030372-500-5-A/TH 5M W/C Interconnection Cable 600.00030372-500-10-A/TH 10M W//C Interconnection Cable 845.00020255-AR/TH Water Cooler 1400.00030153 Wire Feed Unit Wheel Kit 285.00U450810AC 0.8 / 1.0mm Hard Wire V groove feed roll 70.00U451012AC 1.0 / 1.2mm Hard Wire V groove feed roll 70.00U451216AC 1.2 / 1.6mm Hard Wire V groove feed roll 70.00U451012AL 1.0 / 1.2mm Soft Wire U groove feed roll 70.00U451216AL 1.2 / 1.6mm Soft Wire U groove feed roll 70.00U451216FR 1.2 / 1.6mm Cored Wire groove feed roll 70.00U452024FR 2.0 / 2.4mm Cored Wire groove feed roll 70.0020207 Dust Filter Kit 185.00F03040 Pack of 10 Filters 45.00

Recommended Torches161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 153.15161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 161.66552.316.307 SW450.3F 450A Water-Cooled MIG Torch, 3m (60% @ 450A) 292.36552.316.407 SW450.4F 450A Water-Cooled MIG Torch, 4m (60% @ 450A) 312.29

WE

LD

ING

EQ

UIP

ME

NT

Workshop Carts

ARCMASTER 3.1 SERIES CARTSuitable for Arcmaster 300S, 400S, 300TS, 400TS, 400MST and 300 AC/DCFits Power Source only or Power Source and Cooler

Part No.: CRT.ARCM3.1 List Price: £422.00

THERMAL ARC UNIVERSAL TROLLEYSuitable for Arcmaster 200S, 200TS, 200 AC/DC, TA 300WTE, 220GMS and300GMS. Fits Power Source only

Part No.: 020212/SA List Price: £357.00

THERMAL ARC HD INVERTER CARTSuitable for TA 250TE and 220 ACDC Fits Power Source only or Power Source and Cooler

Part No.: 020218/MT List Price: £578.00

POWERMASTER 320SP TROLLEYSuitable for Powermaster 320SP Fits Power Source only or Power Source and Cooler

Part No.: W4000300 List Price: £504.90

- 32 -

CU

TT

ING

EQ

UIP

ME

NT

- 33 -

PLASMA CUTTING

1-3835-4 Drag-Gun Plus 2055.00Includes Power Supply, PCH-42ER Torch with 6.1m leads, Input Power Cable, Work Cable & Clamp, Spare Parts Kit and Operating Manual

1-3835-4F Drag-Gun Plus (fitted with Air Dryer Kit for environments with high 2195.00humidity or fluctuating temperatures)Includes Power Supply, PCH-42ER Torch with 6.1m leads, Input Power Cable, Work Cable & Clamp, Spare Parts Kit and Operating Manual

Cut Capacity

9mm

Input

230V +/-10%, 1ph,50/60 Hz, 18 Amps

Output

15 - 30 AmpsContinuously

Adjustable

Dimensions

H: 279mmW: 267mmL: 394mm

Weight

Net Wt. 25.7 kg

Duty Cycle

35% @35 Amps


SYSTEM ORDERING INFORMATION

7-4220 PCH-42ER (70o) Hand Torch and Lead package 6.1m 358.189-8442 70o Torch Head 171.409-6501 Tip - 40A 2.769-6542 SureLok Electrode 4.819-6507 Gas Distributor 10.669-6003 Shield Cup - Heavy Duty 12.85

System Specifications

- Built in air compressor brings maximum convenience and portability

- Ready to cut right out of the box - just plug it in

- Powerful performance

- Maximum Arc visibility for excellent operator control

- 2 Year Warranty Machine / 1 Year Warranty Torch

Features

DRAG-GUN PLUS1ph, 50/60Hz, 230v Input / 35 amp Output9mm Genuine Cut Capacity

SYSTEM PACKAGE

REPLACEMENT TORCH AND PARTS


3-3837 Air Dryer Kit 291.457-7501 Cutting Guide Kit 69.209-1260 Leather Leads Cover 72.25

Pack Qty1110511

CU

TT

ING

EQ

UIP

ME

NT

PLASMA CUTTING

- 34 -

1-1604-4 Cutskill 35A 1090.00Includes Power Supply, SL40 Torch with 4.5m leads, Input Power Cable, Work Cable & Clamp, Spare Parts, Carry Case and Operating Manual



7-0041 SL40, (75o) Hand Torch and Lead package, 4.5m 189.529-0091 Tip - 35A 2.429-0096 Electrode 3.539-0097 Start Cartridge 11.449-0098 Shield Cup 10.27

- Precision-engineered consumable parts are easy to change and require no tools- Easy-to-use torch trigger release and ergonimic handle provide comfort during long cutting sessions- New SL40 Torch features excellent arc visibility- Surelok® electrode eliminates tip wobble found in some blow-apart torch designs, resulting in a

cleaner arc and longer parts life- Carry Case for maximum portability- 2 Year Warranty Machine / 1 Year Warranty Torch

Features

CUTSKILLTM 35A1ph, 50/60Hz, 230v Input 35 Amp Output 10mm Cut Capacity

SYSTEM PACKAGE

REPLACEMENT TORCH AND CONSUMABLES Pack Qty15511

Cut Capacity

10mm

Input

230V, 1 ph,

16 Amps, 50/60 Hz

Output

35 Amps

Dimensions

H: 280mmW: 133mmL: 419mm

Weight

Net Wt. 11.8 kg

Duty Cycle

30% @ 35 Amps

CU

TT

ING

EQ

UIP

ME

NT

- 35 -

1-4200-4 CutMaster 12 Plus 1790.00Includes Power Supply, SL40TMTorch with 4.5m leads, Input Power Cable, Work Cable & Clamp, Spare Parts and Operating Manual



- Automatic voltage linking to 115V / 230V input power- Lighter weight design for maximum portability - New SL40 Torch features excellent arc visibility- SL40 Torch with Vent2Shield ( ) technology allows the use of smaller compressors compared

to similar 40 Amp units.- Surelok® electrode eliminates tip wobble found in some blow-apart torch designs, resulting in a

cleaner arc and longer parts life- Precision-engineered consumable parts are easy to change and require no tools- Easy-to-use torch trigger release and ergonimic handle provide comfort during long cutting sessions- 3 Year Warranty Machine / 1 Year Warranty Torch

Features

PLASMA CUTTING

CUTMASTERTM 12 PLUS1ph, 50/60Hz, 110v / 230v Input 40 Amp Output12mm Genuine Cut Capacity

SYSTEM PACKAGE

7-0040 SL40, (75o) Hand Torch and Lead package, 4.5m with ATC Connector 216.949-0091 Drag Tip - 20-35A 2.429-0093 Drag Tip - 40A 2.429-0094 Standard Cutting Tip - 40A 2.429-0096 Electrode 3.539-0097 Start Cartridge 11.449-0098 Shield Cup 10.27

REPLACEMENT TORCH AND CONSUMABLESPack Qty

1555511


Cut Capacity

12mm (230V)

8mm (110V)

Input

110V / 230V, 1 ph,

16 Amps, 50/60 Hz

Output

40 Amps (230v)27Amps (110v)

Dimensions

H: 228 mmW: 117 mmL: 470 mm

Weight

Net Wt. 11.8 kg

Duty Cycle

230V: 40%@40A110V: 30%@30A

NEW SL40 Torch features

Minimises gas consumption

by recycling wasted vent gas

as shield gas

Coming Q2

2011

CU

TT

ING

EQ

UIP

ME

NT

- 36 -

1-5130-4 CutMaster 12 - 6.1m leads with ATC Connector 2000.001-5131-4 CutMaster 12 - 15.2m leads with ATC Connector 2130.00

Includes Power Supply, SL60TMTorch with 6.1m or 15.2m leads, Input Power Cable, Work Cable & Clamp, Spare Parts and Operating Manual



- Front Panel LED's indicate status conditions for maximum efficiency- Trigger latch feature prevents hand fatigue during long cuts. Auto pilot restart instantly re-ignites the

pilot arc while cutting expanded metals- True Guard roll bar provides easy transportation and protection for unmatched durability- Lighter weight design for maximum portability - Storage compartment for convenient access to spare parts and consumables- Versatile 1Torch with ATC disconnect makes it easy to add lead extensions offering a combined

extension and lead length of up to 30.5m- 3 Year Warranty Machine / 1 Year Warranty Torch

Features

PLASMA CUTTING

CUTMASTERTM 123ph, 50/60Hz, 400v Input 40 Amp Output12mm Genuine Cut Capacity

SYSTEM PACKAGE

7-5204 SL60, (75o) Hand Torch and Lead package, 6.1m with ATC Connector 361.579-8219 75o Torch Head 210.619-8207 Drag Tip - 40A 4.049-8208 Standard Cutting Tip - 40A 4.049-8215 Electrode 5.899-8213 Start Cartridge 16.839-8218 Standard Shield Cup 15.11

For the full range of 1Torch consumables and torches, please refer to pages 42 and 43



Pack Qty1155511


Cut Capacity

12mm

Input

400V, 3 ph,

8 Amps, 50/60 Hz

Output

40 Amps

Dimensions

H: 381mmW: 305 mmL: 610mm

Weight

Net Wt. 19.5 kg

Duty Cycle

60% @ 40 Amps

7-7507 Air Filter Kit 84.099-7741 Replacement Filter Cartridge 23.027-7501 Basic Cutting Guide Kit 69.207-8910 Cutting Guide Kit Deluxe 170.807-8888 Multi-Purpose Cart 181.007-8911 Straight Line Cutting Guide 180.599-1260 Leather Lead Cover 6.1m 72.259-1280 Leather Lead Cover 15.2m 144.48

CU

TT

ING

EQ

UIP

ME

NT

- 37 -

1-1130-4 CutMaster 20 - 6.1m leads with ATC Connector 2595.00 1-1131-4 CutMaster 20 - 15.2m leads with ATC Connector 2725.00





pilot arc while cutting expanded metals- True Guard roll bar provides easy transportation and protection for unmatched durability- Lighter weight design for maximum portability- Storage compartment for convenient access to spare parts and consumables- Versatile 1Torch with ATC disconnect makes it easy to add lead extensions offering a combined


Features

PLASMA CUTTING

CUTMASTERTM 203ph, 50/60Hz, 400v Input 60 Amp Output Adjustable20mm Genuine Cut Capacity

7-5204 SL60, (75o) Hand Torch and Lead package, 6.1m with ATC Connector 361.579-8219 75o Torch Head 210.619-8210 Cutting Tip - 60A 4.049-8252 Drag Tip - 60A 5.909-8215 Electrode 5.899-8213 Start Cartridge 16.839-8218 Standard Shield Cup 15.11




SYSTEM PACKAGE

Pack Qty1155511

Cut Capacity

20mm

Input

400V, 3 ph,

16 Amps, 50/60 Hz

Output

60 Amps

Dimensions

H: 381mmW: 305mmL: 610mm

Weight

Net Wt. 19.5 kg

Duty Cycle

40% @ 60 Amps


CU

TT

ING

EQ

UIP

ME

NT

- 38 -


Includes Power Supply, SL60TMTorch with 6.1m or 15.2m leads, Input Power Cable,Work Cable & Clamp, Spare Parts and Operating Manual




pilot arc while cutting expanded metals- True Guard roll bar provides easy transportation and protection for unmatched durability- Tip SaverTM current fold back circuit design prevents tip failure when the tip touches the work piece at

high output current levels resulting in prolonged consumable parts life - Lighter weight design for maximum portability- Storage compartment for convenient access to spare parts and consumables- Versatile 1Torch with ATC disconnect makes it easy to add lead extensions offering a combined


Features

PLASMA CUTTING

CUTMASTERTM 253ph, 50/60Hz, 400v Input 80 Amp Output25mm Genuine Cut Capacity

SYSTEM PACKAGE

7-5204 SL60, (75o) Hand Torch and Lead package, 6.1m with ATC Connector 361.579-8219 75o Torch Head 210.619-8211 Cutting Tip - 80A 4.049-8215 Electrode 5.899-8213 Start Cartridge 16.839-8218 Standard Shield Cup 15.11




Pack Qty115511


Cut Capacity

25mm

Input

400V, 3 ph,

20 Amps, 50/60 Hz

Output

80 Amps

Dimensions

H: 381mmW: 305mmL: 610mm

Weight

Net Wt. 19.5 kg

Duty Cycle

40% @80 Amps


CU

TT

ING

EQ

UIP

ME

NT


Includes Power Supply, SL100TMTorch with 6.1m or 15.2m leads, Input Power Cable,Work Cable & Clamp, Spare Parts and Operating Manual







Features

PLASMA CUTTING

CUTMASTERTM 353ph, 50/60Hz, 400v Input 100 Amp Output 35mm Genuine Cut Capacity

SYSTEM PACKAGE





- 39 -

Pack Qty115511


Cut Capacity

35mm

Input

400V, 3 ph,

27 Amps, 50/60 Hz

Output

100 Amps

Dimensions

H: 381mmW: 305mmL: 762mm

Weight

Net Wt. 28.1 kg

Duty Cycle

80% @100 Amps


CU

TT

ING

EQ

UIP

ME

NT



- 40 -








Features

PLASMA CUTTING

CUTMASTERTM 403ph, 50/60Hz, 400v Input 120 Amp Output 40mm Genuine Cut Capacity

SYSTEM PACKAGE





Pack Qty115511

Cut Capacity

40mm

Input

400V, 3 ph,

32 Amps, 50/60 Hz

Output

120 Amps

Dimensions

H: 381mmW: 305mmL: 762mm

Weight

Net Wt. 28.1 kg

Duty Cycle

40% @ 120 Amps


CU

TT

ING

EQ

UIP

ME

NT

PLASMA CUTTING

PAK 2003ph, 50/60Hz, 400v Input 35 - 200 Amp Output Adjustable40mm Genuine Cut Capacity

- 41 -


Cut Capacity

40mm

Input400V, 3 ph,

77 Amps, 50/60 Hz

Output

35 - 200Amps

DimensionsH: 1238mmW: 700mmL: 978mm

WeightNet Wt. 221 kg

Duty Cycle100% @

200 Amps


1-1541 Pak 200 400V CE complete system with 70° torch and 7.6m Leads 21300.001-1542 Pak 200 400V CE complete system with 70° torch and 15.2m Leads 21660.003-0005 Pak 200 P.S. Only 400V CE 19960.00

Includes Power Supply, Ground Cable & Clamp and Coolant - (Note: spare parts are not included)


- Up to 200 amps output for faster cuts- 100% duty cycle at 200 amps- Energy efficient inverter technology- Dual gas capability for significant improvement in cut quality control- MaximumLife® Parts- Exclusive Tip Saver™ Circuit- Smart Start™ auto pilot restart- Smart Logic™ over voltage protection

Features

SYSTEM PACKAGE

2-0009 70 degree 7.6m 1612.072-0010 70 degree 15.2m 1998.062-0015 180 degree 7.6m 1881.292-0016 180 degree 15.2m 2108.34

TORCH AND LEADS PACKAGES OPTIONS AND ACCESSORIES

7-7505 Torch Guide/Circle Cutting Attachment 100.339-2146 3m Plasma Supply Hose 62.019-2147 Secondary Supply Hose 41.417-3460 Remote Pendant Control 142.28

32-1325 Shield Cup, Standard 41.4332-1326 Crown Shield Cup (manual cutting) 46.5532-1527 Shield Cup Gouging 45.9832-1323 Tip, 200A 7.3832-1330 Tip, 150A 7.3832-1321 Tip, 70A 7.3832-1322 Tip, 55A 7.3832-1320 Tip, 35A 7.3832-1512 Tip (0.110) Gouging 20.4332-1513 Tip (0.125) Gouging 20.4332-1514 Tip (0.156) Gouging 20.43

32-1515 Tip (0.171) Gouging 20.4332-1315 Gas Distributor, Cutting 29.5232-1509 Gas Distributor, Gouging 59.0332-1310 Electrode, Air Cutting 10.7832-1311 Electrode, Multi-Gas Cutting 10.7832-1504 Electrode, Air, Gouging 32.3532-1505 Electrode, ArH2, Gouging 32.3532-1502 Coolant Tube Extension, Gouging 17.0320-0001 Wrench 32.618-4025 O-Ring Lubricant 5.069-4173 Parts Box 35.99

TORCH CONSUMABLE PARTS

CU

TT

ING

EQ

UIP

ME

NT

- 42 -

7-5207 ATC Receptacle Adapter 79.54This receptacle adapter is required for each power supplyusing an ATC torch connection. This is connected to the torch adapter kit specific to each power supply

7-7544 ATC Lead Extension 4.6m 183.267-7545 ATC Lead Extension 7.6m 215.767-7552 ATC Lead Extension 15.2m 410.91

7-3460 Remote Pendant Control 142.28

1TORCHTM SL60TM and SL100TM TORCHES

TORCHES STANDARD RPT (O2B)

7-5200 SL60TM 60 Amp 75o 6.1m 315.877-5201 SL60TM 60 Amp 75o 15.2m 401.90

ATC OPTION PARTS

TORCHES ATC CONNECTOR

7-5204 SL60TM 60 Amp 75o 6.1m ATC 361.577-5205 SL60TM 60 Amp 75o 15.2m ATC 495.97


7-5206 SL100TM 100 Amp 75o 6.1m ATC 361.577-5208 SL100TM 100 Amp 75o 15.2m ATC 495.97


1TORCHTM SL100TM MECHANISED TORCHES

STANDARD RPT (O2B) TORCH CONNECTION

ATC TORCH CONNECTION


Remote Interface Adapter 7-3542 included with torch


SL100 Machine Torch - Standard (Fibreglass Tube w/Rack)

SL100 Machine Torch w/ATC - Standard (Fibreglass Tube w/Rack)

1TORCHTM ATC OPTION PARTS

CU

TT

ING

EQ

UIP

ME

NT

- 43 -

List Part No Description Price £

9-8205 Tip, Cutting, 20A, Drag 4.04



9-8208 Tip, Cutting, 40A 4.04

9-8209 Tip, Cutting, 50/55A 4.04

9-8210 Tip, Cutting, 60A 4.04

9-8211 Tip, Cutting, 80A 4.04

9-8212 Tip, Cutting, 90/100A 4.04

9-8213 Start Cartridge 16.83

9-8215 Electrode, Maximum Life® 5.89

9-8218 Standard Shield Cup 15.11

9-8225 Tip, Gouging, 40A 5.00

9-8226 Tip, Gouging, 60A 5.00

9-8227 Tip, Gouging, 80A 5.00

9-8228 Tip, Gouging, 100A 5.00

9-8254 Tip, Gouging, 120A 5.00

9-8231 Tip, Cutting, 70A 4.04

9-8253 Tip, Cutting, 120A 4.73

9-8252 Tip, Drag, 60A 5.90

9-8235 Shield Cap, Drag 50-60A 9.48

9-8236 Shield Cap, Drag 70-100A 9.48

9-8258 Shield Cap, Drag 120A 9.48

9-8237 Shield Cup Body, Maximum Life® 32.00

9-8238 Shield Cap, Mach. 50-60A 8.61

9-8239 Shield Cap, Mach. 70-100A 8.61

9-8241 Shield Cap, Gouging 9.48

9-8243 Shield Cap, Deflector 10.70

9-8422 Standoff Cutting Guide 17.28



9-8224 Ohmic Clip 18.30

1Torch Consumables

Part No Description List Price £

9-8219 SL60/SL100 75o

Torch Head 210.61

4-7830 SL60 Hand Lead Package (O2B) 6.1m 198.42



4-7834 SL60 Hand Lead Package (ATC) 6.1m 217.62




9-7030 SL60/SL100 75o Torch Handle Kit 42.24

9-7031 SL60/SL100 Switch Assembly 17.09

9-7034 SL60/SL100 Torch Trigger Assembly 23.90

5-2550 *Spare Parts Kit, 30 Amp 125.45


5-2552 *Spare Parts Kit, 50/55 Amp 125.45




5-2556 *Spare Parts Kit, 90/100 Amp 131.10

(Note: All *Spare Parts Kits shown above include ten (10) Tips,five (5) Electrodes and one (1) Start Cartridge.)

1Torch Repair Parts

Start Shield Shield Drag GougingElectrode Cartridge Tip Cup Cup Body Shield Cap Deflector Shield Cap

Universal Standoff Cutting GuidePart No 9-8422

CUTMASTER™

TRUE Standoff Cutting GuidesPart No 9-8281 (CUTMASTER 12, 20, 25, 35 & 40)Pack

Qty

5555555515155555555111111111111

CU

TT

ING

EQ

UIP

ME

NT

- 44 -

Torch Adapter KitsThe model of the plasma cutting system or torch must be known to determine the adapter kit required

“EURO” Style Connection Part NumberTorch Brands

TRAFIMET, BINZEL, CEBORA, TEC.MO 7-3470EL

TRAFIMET®

A60, A80, A81 (non Euro) 7-3437ELA90, A101 (non Euro) 7-3474EL

BINZEL®

PSB 30 (non Euro) 7-3472ELPSB31, PSB 60/80 (non Euro) 7-3473EL

CEBORA®

P35, P50, P70 (non Euro) 7-3438EL

SAF®

Z1.0, Z2.0, Z3.0, CP40R, CP100R 7-3471EL

*The Miller PlazCut machines with Serial Numbers beginningJE are not compatible with 1TorchTM RPT Torches.

NOTES:The maximum current output of some of the Power Supplieslisted can exceed the maximum rating of the torch. Do notoperate the selected RPT Replacement Torch at current levelsabove the rating of the torch. Each Adapter Kit includesconnection fitting, electrical connectors and installationinstruction sheets for the selected power supply.

CEBORA is a registered trademark of Cebora S.p.A.;DAIHEN is a registered trademark of Daihen Inc.; ESAB andL-TEC are registered trademarks of ESAB AB; HARRIS andLINCOLN are registered trademarks of Lincoln Electric Co.;HOBART is a registered trademark of Hobart Brothers Co.;HYPERTHERM, Max and powermax are registeredtrademarks of Hypertherm, Inc.; MILLER and Spectrum areregistered trademarks of Miller Electric Mfg. Co.;MULTIQUIP is a registered trademark of Multiquip, Inc.; NU-TECSYS is a registered trademark of Nu-Tecsys, Inc.; P-TRON is a registered trademark of P-Tron Plasma/TechSystems; SMITH is a registered trademark of SmithEquipment Co.; INNERLOGIC is a trademark of Innerlogic;THERMAL DYNAMICS, PAK, CUTMASTER, PakMaster,EconoPAK, Dynapak and Drag-Gun are registeredtrademarks of Thermal Dynamics Corp.

“EURO” Style Connection “Euro” AdapterMachine Brands Kit Part Number

LINCOLN, EWS, CASTOLIN, CEBORA, SELCO 7-3470ELCEMONT, HELVI, CEA, STEL, CIFI, FRIMAR, JACKLE

HYPERTHERM®

Powermax® 380 7-3477Powermax® 600 w/Int. Q.D. 7-3480Powermax® 1000, 1250 7-3461Powermax® 800. 900 7-3481Powermax® 1100 7-3455Powermax® 1650 7-3483Max® 42, 43, 40cs 7-3454Max® 40, HT 40 (HF Start) 7-3430Max® 70, 80,100 w/wo Q.D.

ESAB® (yellow)CaddyCut, PCM-SMi, 500i, 625i, PCS-43, HandyPlasma 50 7-3425PCS-53, 80, 90 7-3435ESP-100i, LPH 120 7-3426LPH 50/80, PCM-750i, 875, 1000i, 1125, HandyPlasma 70 7-3429Sidewinder 30, 55, 105 7-3434EL

CEBORA®

Prof 36, 52, 70 7-3471EL

SAF®

Zip 1.0, 2.0, 3.0, 4.0, Prestozip 615, Prestozip 2, Nertazip 215, 525/225, 540 7-3471EL

MILLER®

*Plazcut 60/Zipcut 7-3432Spectrum 250D, 500, 750 7-3433Spectrum 700, 1000, 1250, PLUS 7-3430Spectrum 3080 7-3456Spectrum 701, 2050, 650 7-3457Spectrum 300 7-3476Spectrum 375 7-3477OERLIKON®

CITOARC AP15-1, AP25-2, AP217, AP225 7-3471EL

THERMAL DYNAMICS®

PAK® 3XR, 5XT, 5XR, 6XR, 7XR, 625XR, 750XR 7-3446PAK® 8XR, 10XR, 1000XR, 1250XR, 7-3434PakMasterTM 75, 100PakMasterTM 50XL/XLP, 75XL/XLP, 100XL/XLP 7-3447CUTMASTERTM 50, 75, 80XL, 100PakMasterTM 25, 38XL, EconoPAK® 25 7-3443Drag-Gun® 38, PAK® 4Xi, 6XiPAK® 2XT-220, Dynapak® 110PakMasterTM 50 w/ Smart Torch (Q.D.) 7-3445EconoPAK® 50 7-3449EconoPAK® 100 7-3450PAK® 5 7-3444PAK® 10 7-3436

Manufacturer Adapter Kit Manufacturer Adapter KitPower Supply Model Part Number Torch Model Part Number

CU

TT

ING

EQ

UIP

ME

NT

- 45 -

AccessoriesThermal Dynamics

®offers accessories to help improve cutting performance.

TORCH CUTTING GUIDES / GUIDE KITS

Cutting Guide Kit (Deluxe)Cat. No. 7-8910 List Price - £170.80PCH 10,25,26,28,35,40,42,60,62,75,76,80,100XL,102, RPT 28, 100R(ER), 1Torch Cuts circles from 54mm to 1054mm with proper cutting attachments.This kit includes easy add-on attachments to fit most Thermal Dynamics torches for precise straight line, circle cutting and bevelling. Includes Carrying Case, Radius/Roller Kit (7-7501), Circle Cutting Guide Kit (7-3291), Magnetic Pivot, Suction Pivot.

Circle Cutting Guide Kit Cat. No 7-3291 List Price - £118.11PCH 10,25,26,28,35,40,42,60,62,75,76,80,100XL,102, RPT 28, 100R(ER), 1TorchCuts 54mm to 705mm circles (using magnetic attachment) when cutting orbevelling is required. For use with most Thermal Dynamics torches. Guideshown with optional pivot (7-3148).

Radius / Roller Cutting Guide Kit Cat. No. 7-7501 List Price - £69.20PCH 10,25,26,28,35,40,42,60,62,75,76,80,100XL,102, RPT 28, 100R(ER)1Torch (not circles only radius)This easy-to-use guide cut circles from 76mm up to 730mm. Maintains aconsistent height off the work piece whether you are using the circle cuttingattachment for cutting circles or the roller guide feature to improve your straight-line cutting.Both novices and experts will see noticeable improvement in quality, speed andparts life. Can be used with most Thermal Dynamics torches.

Straight Line Cutting Guide Cat. No 7-8911 List Price - £180.59Introducing a new cutting guide accessory suitable for all hand torches, PCH-10through PCH-102 and the 1Torch. This versatile, straight line cutter is for handheld systems and it cuts vertical, 90o, or bevel cuts. Its consistent standoffimproves cut quality and maximises overall performance. Produces more efficientstraight line cuts.

Lightweight, minimum set up time and no power required. Magnetic mountsensure placement and ease of use. Optional suction plates available for non-magnetic applications (i.e. aluminum and stainless steel). The Cutting Guide Kitincludes: 1.2m standard rail Torch Holder and Busing Heavy Duty Magnets (2 ea.)Slide Assembly Wheels and Fasteners. Optional 1.2m extensions (9-7971) available.

CU

TT

ING

EQ

UIP

ME

NT

- 46 -

TORCH CUTTING GUIDES (CONT.)

CUTMASTER ™ TRUE Standoff Cutting Guides

Cat. No. 9-8281 (CUTMASTER 12, 20, 25, 35 AND 40) List Price - £15.17

New standoff guides designed to fit the SL60 & SL100 torches specific to theCUTMASTER TRUE™ Series systems. The standoff is preset.

MISCELLANEOUS TORCH ACCESSORIES

Leather Leads Cover 4.6m (15 ft.) 9-1258 List Price - £61.536.1m (20 ft.) 9-1260 List Price - £72.257.6m (25 ft.) 9-1270 List Price - £88.2915.2m (50 ft.) 9-1280 List Price - £144.48

These leads covers are suitable for both 1TorchTM

and SureLok® leads. Snaps make it easy to install. For wider torches, consider snapping two covers together width wise.

Trigger Guard Kits

1Torch (SL60 & SL100)Cat No. 9-8420 - Short Trigger Guard List Price - £19.53

These guards offer additional protection from accidental activation or damage to thetorch switch.

Remote Pendant Control Cat No. 7-3460 - 6.1m (20 ft.) List Price - £142.28Remote Pendant Control for your Mechanised application.

Hand Pendant ExtensionCat No. 7-7744 - 7.6m (25 ft.) List Price - £118.86

ATC™

Lead Extensions 4.6m (15 ft.) 7-7544 List Price - £183.267.6m (25 ft.) 7-7545 List Price - £215.7615.2m (50 ft.) 7-7552 List Price - £410.91

Available for any system using 1Torch with ATC Quick Disconnect. Leads Extensions enable you to customise your lead length to suit the cutting job up to 30.5m.

Long TriggerGuard shown

CU

TT

ING

EQ

UIP

ME

NT

- 47 -

AIR FILTER/AIR FILTER KITS

For improved consumable parts life and overall performance, Thermal Dynamics recommends Air Filter Kits be used on all plasma cutting systems.

Single Stage Air Filter Kit List Price - £84.09Cat. No. 7-7507 (Filter Body 9-7740, Hose 9-7742, Filter Element 9-7741)For use with shop compressed air systems, this in-line filter will not allow moisture or water to pass through the filter element even if it becomes completely saturated. This hi-tech filter element actually blocks the absorption of water to increase performance and improve consumable parts life.

TORCH COOLANT (For all Thermadyne liquid-cooled systems)

Extra Cool™

Coolant (Standard Coolant)Cat. No. 7-3580 List Price - £20.75Resists freezing down to +10oF (-12oC)

Ultra Cool™

CoolantCat. No. 7-3581 List Price - £26.09Resists freezing down to -27oF (-33oC)

Extreme Cool™

CoolantCat. No. 7-3582 List Price - £42.15Resists freezing down to -65oF (-51oC)

De-I Cool™

CoolantCat. No. 7-3583 List Price - £10.98De-ionised water mixture for use where freezing protection is not required.

PORTABLE GEAR

Multi-Purpose CartCat. No. 7-8888 List Price - £181.00Designed for most portable manual cutting systems such as the PakMaster or CUTMASTER, or any other similar sized systems.This rugged steel cart has easy rolling 203mm diameter wheels along with 76mm front mounted casters. This cart also serves as an excellent showroom display stand.

MISCELLANEOUS ACCESSORIES

Welding GlovesCat. No. 9-1250 List Price - £10.15

Plasma Cutting Techniques - DVD

AR

C A

CC

ES

SO

RIE

S

Auto-Darkening Welding Helmet

Ordering Information

Part no. Description List Price £

WHF41001 Weldskill Helmet (Carbon Fibre) 80.00WH41001ADF Auto Darkening Filter Cartridge 68.54WH41001FL Front Cover Lens 1.43WH41001IL Inside Cover Lens 1.04WH41001HB Front Headband 3.02WH41001HG Headgear Assembly 15.01

Features BenefitsAuto-darkening Automatically adjusts from light to dark and from dark to lightVariable Shade Welding shade levels from 9-13, adjustable based on the arc strengthLight-weight For improved operator comfort4 sensors To respond rapidly to the welding arcEasy Process Changeover From welding to grindingDelay Time Switch Long/Medium/Short delaySolar-Powered No need to worry about changing batteriesBacked by Tweco support Quality, reliability, and a 2-year warranty

- 48 -

AR

CA

CC

ES

SO

RIE

S

Tweco WeldSkill Air-Cooled MIG Torches


WS180XE-10-3035 WeldSkill 180A MIG Gun, 10ft 85.86WS180XE-12-3035 WeldSkill 180A MIG Gun, 12ft 90.10

WS220XE-10-3035 WeldSkill 220A MIG Gun, 10ft 94.34WS220XE-12-3035 WeldSkill 220A MIG Gun, 12ft 100.70

Tweco TWE Air-Cooled MIG Torches


161.550.307 TWE2.3E Tweco 250A MIG Gun, 3m (10ft) 116.28161.550.407 TWE2.4E Tweco 250A MIG Gun, 4m (12ft) 127.61

161.560.307 TWE4.3E Tweco 400A MIG Gun, 3m (10ft) 153.15161.560.407 TWE4.4E Tweco 400A MIG Gun, 4m (12ft) 161.66161.560.457 TWE4.45E Tweco 400A MIG Gun, 4.5m (15ft) 168.74

Tweco Classic Air-Cooled MIG Torches


X210-4045 Tweco Classic No. 2, 200A MIG Gun, 3m (10ft) 175.83X212-4045 Tweco Classic No. 2, 200A MIG Gun, 4m (12ft) 185.75X215-4045 Tweco Classic No. 2, 200A MIG Gun, 4.5m (15ft) 195.70

X410-3545 Tweco Classic No. 4, 400A MIG Gun, 3m (10ft) 218.37X412-3545 Tweco Classic No. 4, 400A MIG Gun, 4m (12ft) 232.54X415-3545 Tweco Classic No. 4, 400A MIG Gun, 4.5m (15ft) 246.73

- 49 -

AR

C A

CC

ES

SO

RIE

S

Tweco WeldSkill ConsumablesPart no. Description List Price £

WS21-50F Nozzle, 13mm bore 13.35WS21-37 Nozzle, 9.5mm bore 8.75WS21-62 Nozzle, 16mm bore 8.75WS11-23 Contact Tip, 0.6mm 0.61WS11-30 Contact Tip, 0.8mm 0.6111-40 Contact Tip, 1.0mm 0.62WS11-45 Contact Tip, 1.2mm 0.61WS51 Gas Diffuser 3.32WS42-3035-15 Conduit Liner, 0.8-0.9mm 14.49

Tweco TWE & Classic Consumables

Contact Tips14-30 0.8mm - Standard 0.6814-40 1.0mm - Standard 0.6814-45 1.2mm - Standard 0.6814-52 1.3mm - Standard 0.6814-116 1.6mm - Standard 0.68

Conduit Liners - TWE2 and Classic No.2 Guns42-3035-15 15ft Steel Liner, 0.8mm wire 14.6342-4045-15 15ft Steel Liner, 1.0mm / 1.2mm wire 14.63

Conduit Liners - TWE4 and Classic No.4 Guns44-3545-15 15ft Steel Liner, 0.8mm / 1.2mm wire 15.0144-116-15 15ft Steel Liner, 1.2mm / 1.6mm wire 15.01

Gas Diffusers52 Gas Diffuser (TWE2 and Classic No. 2 Guns) 4.8954A Gas Diffuser (TWE4 and Classic No. 4 Guns) 3.1452FN Gas Diffuser (Fixed Type Nozzles) 5.54

Nozzles - TWE2 and Classic No.2 Guns22-50 1/2” / 13mm Bore 3.0222-62 5/8” / 16mm Bore 3.02

Nozzles - TWE4 and Classic No.4 Guns24A-50 1/2” / 13mm Bore (adjustable) 3.1224A-62 5/8” / 16mm Bore (adjustable) 3.1223-50 1/2” / 13mm Bore (self insulated, screw-on) 10.4323-62 5/8” / 16mm Bore (self insulated, screw-on) 10.43

- 50 -

AR

CA

CC

ES

SO

RIE

S

Air Carbon Arc Gouging

K4000 Angle-Arc® Manual Gouging Torch

FEATURES and BENEFITS

Natural 15o

Torch Angle Greater operator comfort

360o

Swivel Cable Less cable twist / Less strain on operator

Positive Grip Handle Greater operator feel and ease in positioning the torch

Reduced Weight Optimum cable and torch weight to minimise fatigue

High Quality Cable Hose Best quality cable hose offers high heat and abrasion resistance

Rugged Construction Overall rugged construction for the harsh environment


61-082-008 K4000 Extreme 1000A Gouging Torch with 7” Cable 229.1461-082-009 K4000 Extreme 1000A Gouging Torch with 10” Cable 255.37

K4000 Torches are suitable for use with up to 13mm electrodes

Carbon Electrodes

24-052-003 (8 x 355mm) 5/16 x 14 DC/CC Jointed 100 0.6224-064-003 (9.5 x 430mm) 3/8 x 17 DC/CC Jointed 100 0.9724-084-003 (13 x 430mm) 1/2 x 17 DC/CC Jointed 100 1.2324-104-003 (16 x 430mm) 5/8 x 17 DC/CC Jointed 100 1.8224-124-003 (19 x 430mm) 3/4 x 17 DC/CC Jointed 100 2.29

Professional all purpose gouging electrodes. Controlled copper coating improvesconductivity providing more efficient, cooler operation and helps maintain electrodediameter at the point of the arc.

DC/CC JOINTED ELECTRODES

22-983-003A (4 x 305mm) 5/32 x 12 DC/CC Pointed 50 0.2422-033-003A (5 x 305mm) 3/16 x 12 DC/CC Pointed 50 0.2522-043-003A (6.5 x 305mm) 1/4 x 12 DC/CC Pointed 50 0.2622-053-003A (8 x 305mm) 5/16 x 12 DC/CC Pointed 50 0.3322-063-003A (9.5 x 305mm) 3/8 x 12 DC/CC Pointed 50 0.4322-082-003A (13 x 355mm) 1/2 x 14 DC/CC Pointed 50 0.76

Part No. Description Pieces Price £ perPer Box Electrode..

DC/CC POINTED ELECTRODES

K4000 EXTREME GOUGING TORCHES

- 51 -

62-991-424 Tri-Arc 2200A Gouging Torch with 7” Cable 443.06Tri Arc Torches are suitable for use with up to 19mm electrodes

TRI-ARC FOUNDRY GOUGING TORCH

AR

C A

CC

ES

SO

RIE

S03-003-000 SLICE Torch Assembly (0.3m/1ft Cable) 400.9903-003-001CE SLICE Torch Assembly (1.8m/6ft Cable) 400.9903-003-006CE SLICE Torch Assembly (3m/10ft Cable) 400.9994-168-024 3/8” Collet Nut for 3/8” Rods 47.2694-158-045 3/8” Collet Chuck for 3/8” Rods 30.03


42-049-002 Coated SLICE Rod (7 x 559mm) (1/4 x 22) 25 46.5842-049-003 Coated SLICE Rod (7 x 559mm) (1/4 x 22) 100 163.6242-049-005 Coated SLICE Rod (10 x 457mm) (3/8 x 18) 50 132.3743-049-002 Bare SLICE Rod (7 x 559mm) (1/4 x 22) 25 44.0043-049-003 Bare SLICE Rod (7 x 559mm) (1/4 x 22) 100 152.8943-049-005 Bare SLICE Rod (7 x 1118mm) (1/4 x 44) 25 78.4443-049-007 Bare SLICE Rod (10 x 457mm) (3/8 x 18) 50 109.6943-049-009 Bare SLICE Rod (10 x 914mm) (3/8 x 36) 25 90.09

Part No. Description Pieces Price £Per Box Per Box

SLICE CUTTING RODSAll SLICE Cutting Rods should be ordered per box.

SLICE® CUTTING SYSTEM

SLICE® Battery Pack The SLICE Battery Pack comes in a rugged tool box. As with the Utility Pack, you get all the basic items needed to do a cutting job such as torch, striker and rods. Also included in the Battery Pack is a 12-Volt rechargeable SLICE battery Box Assembly.

SLICE® Exothermic Cutting Rods SLICE exothermic cutting rods are designed specifically for use with SLICEcutting systems.

SLICE® Cutting Systems

SLICE TORCHES AND ACCESSORIES

- 52 -

SLICE BATTERY PACK

Part No. Description List Price £63-991-007CE SLICE Battery Pack (220V) 1088.15

Setup for 1/4” Slice Rods

Do Thermadyne Inverters work on Generators?

One of the main fears when selling any inverter is its reliability whenused with a generator. Some inverters are very susceptible to inputvoltage fluctuations.

Thermal Arc and Thermal Dynamics inverter-based systems have inbuilt protection to guard against any such fluctuations and minimisedamage due to under or over voltage conditions.

What Size of Generator do I Need?

The KVA rating of the machine is the main factor to consider. However,it is important to remember that the input voltage can be affected byload changes during arc striking particularly when using rods whichrequire a high open circuit voltage in order to initiate the arc.

With the above in mind, listed opposite are the input current ratingsand equivalent KVA rating for Thermadyne machines and therecommended generator size for running these systems up to theirmaximum duty cycle.

If you wish to run these machines on extension leads you must ensurethat you use the correct rated cables and mains plugs.

As a guiding principle the kVA rating of a generator should be 1/3higher than the rated load it is to supply.

- 53 -

Part No Power Source Input Voltage Max input current Max rated Recommendeddraw @ max current kVA input Generator Sizeoutput of machine

W1003605 161S 115V/230V 35.5A/23.2A 4/5.5 kVA 5.5/7.5 kVAW1002903 175SE 230V 40A 10 kVA 14 kVAW1003003 175TE 230V 40A 10 kVA 14 kVAW1003803 201TS 115V/230V 39A / 32A 5/8 kVA 7/11 kVA10-9326 250TE 415V 15A 10.8 kVA 15 kVA10-9401 300WTE 415V 13A 9.1 kVA 13 kVA10-3091 400TS 415V 30A 21.5 kVA 29 kVA10-3099 200AC/DC 230V 38A 8.7 kVA 12 kVA10-9402 220AC/DC 230V 33A 7.5 kVA 11 kVA10-3098 300AC/DC 400V 20A 14.4 kVA 20 kVA10-9403 350AC/DC 400V 27A 19 kVA 26 kVAW1003186 Fab181i 230V 20A 5 kVA 7 kVA707079 Fab200 240V 36.7A 9 kVA 12 kVA706114 Fab250 240V 48A 11.5 kVA 16 kVA706124/25 Fab330 415V 20A 14.5 kVA 20 kVA10-9405 Fab400II 400V 24.2A 16.7 kVA 22 kVA10-9406 Fab450II 400V 43.4A 28.5 kVA 37 kVA10-9330 220GMS 230V 20A 7.5 kVA 10 kVA10-9407 300GMS 400V 13A 9.2 kVA 13 kVA10-9408 400GMS 400V 38A 26 kVA 35 kVA10-3089 400MST 415V 30A 21.5 kVA 29 kVAW1000103PP Powermaster 320SP 400V 21A 20 kVA 27 kVAW1000303PP P’master 400SP (AC) 400V 27A 25 kVA 34 kVAW1000203PP P’master 400SP (WC) 400V 27A 25 kVA 34 kVAW1000503PP Powermaster 500SP 400V 36A 30 kVA 40 kVA1-3835-4 Drag-gun Plus 230V 30A 8.3 kVA 12 kVA1-1604-4 CutSkill 35A 230V 27A 7 kVA 10 kVA1-4200-4 Cutmaster 12 PLUS 115V/230V 28.5A/21.4A 5.6/8.5 kVA 7.5/11.5 kVA1-4630-4 Cutmaster 10 230V 14A 3.4 KVA 5.5 KVA1-5130-4 Cutmaster 12 400V 8A 5.3 KVA 8 KVA1-1130-4 Cutmaster 20 400V 16A 11 KVA 16 KVA1-1330-4 Cutmaster 25 400V 17A 11.8 KVA 17 KVA1-1730-4 Cutmaster 35 400V 27A 18.7 KVA 24 KVA1-1930-4 Cutmaster 40 400V 32A 23.6 KVA 31 KVA

Slow blow fuses or Motor rated circuit breakers are recommended for the above machines. Recommended Generators KVA ratings MUST be adhered to minimise the welding power source’s possible failure as aresult of inadequate mains power at the equipment's MAXIMUM input current draw at and MAXIMUM rated output atMAXIMUM duty cycle. Calculating kVA (Kilovolt-Amperes) ratings.

1. Single PhaseKilovolt-Amperes (kVA) = Volts x Amperes

1000 2. Three Phase

Kilovolt-Amperes (kVA) = Volts x Amperes x 1.731000

Information prepared by Thermadyne Technical Services. +44 1257 224852

Reccommended Generator Sizes

- 54 -

Warranty Thermadyne guarantees the proposed product to be free from defects in material or workmanship when operatedin accordance with the written instructions as defined in the owner’s manual supplied with the machine.Thermadyne welding products are manufactured for use by commercial and industrial users and trainedpersonnel with experience in the use and maintenance of electrical welding and cutting equipment.

Thermadyne warranty will not apply to:a) Equipment that has been modified by any other party other than Thermadyne’s own service personnel or

with prior written consent obtained from Thermadyne Technical department (UK).b) Equipment that has been used beyond the specifications established in the owners manual.c) Installation not in accordance with the installation/service manual.d) Failure to clean and maintain the machine as set forth in the owner, installation or service manual.

If warranty is being sought, please contact Thermadyne's UK Technical department for a warranty authorisationreturns form.

Welding Equipment - Limited Warranty Period

Product Period

400TS, 400 MST, 200AC/DC, 300AC/DC, TIG/HF400APowerMaster Plus 320SP, 400SP, 500SP, Fabricator 200, 3 Years220AC/DC, 250AC/DC, 350 AC/DC,Fabricator 181i, Fabricator 250, Fabricator 330, Fabricator 400II, Fabricator 450II, 220GMS, 300GMS, 400GMS, 175SE, 175TE, 161S, 201TS 2 YearsOptions and Accessories 6 MonthsRepair and Replacement Parts 3 MonthsTorch Consumables None

Cutting Equipment - Limited Warranty Period

Product Period

CutMaster Series 3 YearsDrag-Gun Plus, Pak 200, CutSkill 35 2 Years1TorchTM, SureLokTM Torches and PCH 120 1 YearOther Torches 6 Months Repair Parts 3 Months Torch Consumables None

- 55 -

TORCHES AND TORCH PARTSF1 Tweco MIG Guns F2 Tweco MIG Consumables and PartsF4 Tweco MMA AccessoriesE1 “WS” WeldSkill Consumable PartsG2 Arcair Systems, torches, Accessories and Parts G3 Arcair Slice and Underwater ElectrodesG6 Arcair Gouging ElectrodesG7 Arcair branded ChemicalsH2 Manual Plasma Torches, Parts and Accessories R1 OCIM TIG Torches R2 OCIM TIG Consumables and Torch PartsR3 Ocim MIG Digital Torches and ConsumablesR4 Flex Neck Torches and ParsR5 Ocim MIG TWE TorchesR6 Ocim MIG Torches, consumables and Torch Parts

GAS EQUIPMENTA1 Victor Kits, Regulators, Torches,Repair PartsA2 Victor branded Tips and NozzlesC1 CutSkill Gas Torches and RegulatorsC2 CutSkill Tips and NozzlesB1 TurboTorch branded products

Terms and ConditionsEffective Date: These current list prices supersede all other price lists.

All deliveries will be priced as this list.

Currencies: All prices are quoted in Pounds Sterling.

Discounts: All prices quoted are list prices to which standard distributor discount will be applied.

Delivery Terms: UK Deliveries - Prices are Freight Paid to UK mainland destination.Export Deliveries - Prices are Ex Works, Chorley, UK.

Order Value: All orders are subject to our minimum order value of £150.

Product Details: We have a full range of technical literature available on request.

Prices are subject to change and amendmentwithout notice and to our normal terms and

conditions of sale

For further details, please contact the Customer Service TeamTelephone (44) 01257 224824 / Fax (44) 01257 224800

WELDING AND CUTTING EQUIPMENT

I1 Welding Equipment, Options and Accessories I2 PowerMaster Range of Welding Equipment and AccessoriesI5 PowerMaster - Robotic Synergic MIGH1 TDC Manual Plasma Cutting Systems, Options and AccessoriesD1 CutSkill Plasma Cutting SystemsF6 Tweco Watercooler and Repair PartsF7 GAR Cooler and Repair Parts

REPAIR PARTSI4/H4 All Manual Plasma Cutting and Welding Repair Parts

SAFETY ACCESSORIES

F8 Helmets

AUTOMATIONPLASMA CUTTINGJ1 Thermal Dynamics Automation Systems and ComponentsJ2 Thermal Dynamics Automation Consumable PartsJ3 Automation Repair PartsJ4 ULTRACUT/AUTOCUT Systems and ComponentsJ5 XT-300/301 Torches Style 2 (22- & 36-)J6 XT-300/301 Consumables Style 2 (22- & 36-)J7 XT-300/301 Torches Style 1 (21- & 35-)J8 XT-300/301 Consumables Style 1 (21- & 35-)

PLASMA WELDINGI6 Plasma Welding Systems + AccessoriesI7 Plasma Welding Torches, Leads and Consumables

ARC ACCESSORIESK1 Automation/Robotics MIG/TIG Torches, Parts, Accessories

Product Discount CategoriesINDUSTRIAL PRODUCTS

- 56 -

THERMADYNE INDUSTRIES LIMITEDChorley North Industrial ParkChorley, Lancashire PR6 7BXUnited KingdomContact NumbersTel: +44 1257 224824Fax: +44 1257 224800

Senior VP Sales General Manager Europe/ROWF Monechi Mobile: +39 348 4481304 [email protected]

SalesRegional Sales ManagersSteve Waring UK/Eire/ROW +44 7774405075 [email protected] Wennardt Nordic/Central Eastern Europe +31 235614182 [email protected] Vanheeswyck Northern Europe +32 496634233 [email protected] Costamagna Southern Europe +39 0236546801 [email protected] Demidov Russian Regions +7 8129862876 [email protected] Dall'Oglio Western Europe/North Africa +34 608 121525 pdall’[email protected] Sales ManagersClive Simpson UK - South +44 7789685011 [email protected] Thackeray UK - North +44 7720350810 [email protected]

Automation - Regional Sales ManagersGiovanni Agazzi Southern Europe +39 348 4481 302 [email protected] Arntz Northern Europe +49 175 1777722 [email protected] Milner UK/ROW +44 7860 256787 [email protected]

Sales & Marketing Administration Denise Archer Sales + Marketing Admin Manager +44 1257 224 811 [email protected] Mallion Marketing Coordinator +44 1257 224 838 [email protected]

Application Support SpecialistJeff Jarvis (Welding) +44 7725 791444 [email protected] Meredith (Welding) +44 7983 435370 [email protected] Cadenabbio (Automation - S Europe) +39 0236546801 [email protected] Zelis (Automation - N Europe) +31 615 838219 [email protected]

Customer Service - UKTeruka Attwood Team Leader +44 1257 224 819 [email protected] Service RepresentativesInge Graham +44 1257 224 834 [email protected] Smith +44 1257 224 825 [email protected] Harrison +44 1257 224 821 [email protected]

Customer Service - ItalyRoberto Simonetti Team Leader +39 0236546801 [email protected] Service RepresentativesGrazia Fettolini +39 0236546801 [email protected] Natale +39 0236546801 [email protected] Moreno +39 0236546801 [email protected]

Technical ServiceAndy Warren European Service Manager +44 1257 224 852 [email protected] Roberts Repair Technician +44 1257 224 851 [email protected] Taylor Technical Administrator +44 1257 224 850 [email protected] Barizza Service Technician - Italy +39 0236546801 [email protected]

How to Contact UsTHERMADYNE SRLVia Bolsena, 720098 San Giuliano Milanese (MI) ItalyContact NumbersTel: +39 02 36546801Fax: +39 02 36546840

Website: www.thermadyne.com

- 57 -

Gas ApparatusOutfits

Regulators Torches & Tips Gas Manifolds

Arc Welding ProductsMIG

Manual Products Robotics

Arc Gouging

Arc AccessoriesArc Gouging

Manual ProductsElectrodes

Plasma CuttingSystems Torches

Accessories

Arc Welding Power SuppliesInverters

Wire Feeders

HardfacingWelding Wires

Electrodes

For information on the brands not included in this guide please contact us for details

www.thermadyne.com

WORLD HEADQUARTERS: Suite 300, 16052 Swingley Ridge Road

Chesterfield, MO 63017, USA Tel: +636-728-3000 Fax: + 636-728-3021

thermadyne product guide

Documents

page trolleys

page accessories

page mig torch consumables

page weldskill mig torches

plus sl40 atc

page torch adapter kits

page arcair slice

page classic tweco mig