the yaasa adjustable bed · the yaasa adjustable bed may solely be used for the intended use...

The Yaasa Adjustable BedOwner’s Manual

02 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 03YAASA ADJUSTABLE BED OWNER‘S MANUAL //

Safety 01

IMPORTANT SAFETY INSTRUCTIONS

This manual is designed according to UL 962 Standard for Household and Commercial Fur-nishing and contains safety instructions. The operator of the product is obligated to read this manual. The individual persons themselves are responsible to observe the safety instructions.

Furthermore, important notes about accident prevention can be found here.

GENERAL SAFETY INFORMATION

Generally, the following safety regulations and obligations are valid when handling the system: ▪ The system may only be operated in proper working condition. ▪ It is forbidden to remove, change, bridge, or bypass any protection, safety or monitoring

devices. ▪ It is forbidden to reconstruct or modify the system without written approval by the supplier. ▪ Only genuine spare parts may be used for repair. ▪ All repair work must be performed by authorized personnel only. ▪ All protection, safety and monitoring devices have to be checked regularly by the oper-

ator and maintained ▪ The national employee protection regulations and the national safety and accident pre-

vention regulations are valid. ▪ Only perform hardware changes in de-energized state (it does not matter if it is the power

cable, remote control or other components). ▪ Always make sure no children, animals are in the proximity of the bed when operating it. ▪ Ensure no person or object is in the way of moving parts (e.g. night stand or open window). ▪ Do not sit on any of the moving parts when operating the bed (laying on the bed flat is ok).

CONTENT01. SAFETY ..........................................................................................................................................................................0302. INTRODUCTION ......................................................................................................................................................1203. BOX CONTENTS .....................................................................................................................................................1404. ASSEMBLY ..................................................................................................................................................................1605. DISASSEMBLY AND TRANSPORTATION .............................................................................................2606. OPERATION ................................................................................................................................................................2807. CLEANING AND MAINTENANCE ...............................................................................................................3008. UNUSUAL BEHAVIOR AND SOLUTIONS ............................................................................................3109. TECHNICAL DATA .................................................................................................................................................3410. FINAL DISPOSAL ...................................................................................................................................................34

COPYRIGHT®

This original documentation is protected by copyright. All rights, especially the right of repro-duction and distribution as well as translation, are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of Yaasa Studios Inc. All violations involving copyright may result in legal action.

2017 Yaasa Studios Inc.


INTENDED USE

The Yaasa Adjustable Bed may solely be used for the intended use according to this documentation.

The Yaasa Adjustable Bed is an electrically controlled bed base. It is operated by a remote control. Additionally, it contains one USB module on each side to charge mobile devices such as smart phones or tablet PCs. It is designed for indoor use only. Outdoor use is forbidden. This bed is not suitable for potentially explosive atmosphere.

HOSPITAL / MEDICAL DISCLAIMER:

This bed is NOT designed for hospital or medical use (in-home or commercial) and is NOT designed to meet medical or hospital standards. Do not use this bed with TENT TYPE oxygen therapy equipment or use near explosive gases.

This bed may only be used with a suitable mattress. All used mattresses shall comply with the Federal Register 16 CFR Part 1633. Check with your mattress manufacturer if it is compatible with electrically adjustable beds. This bed is not suitable for water bed mattresses. It is not in-tended to be used without a mattress.

This system is intended to be assembled and used by adults only. It is not designed for children or animals.

The recommended weight limit (including mattress) is 700 lbs evenly distributed across the bed. The head and foot sections of this product are not designed to individually support or lift this amount of weight. For optimal performance, consumers should enter and exit the adjustable base only when it is in flat (horizontal) position. Avoid placing entire weight on head or foot section, es-pecially when in elevated position. Do not stand on the base at any time. Note: Exceeding the rec-ommended weight restrictions could damage the product and void the warranty.

Any usage other than described in this manual is only allowed after written consent by Yaasa Studios.

Unintended use or improper operation can result in personal injury and/or damage to the system.

Furthermore, liability and warranty claims become void in case of unintended use.

REASONABLY FORESEEABLE MISUSE

The Yaasa Adjustable Bed shall not be used in the following way: ▪ Do not use the bed as a climbing aid. ▪ Do not jump on the bed. ▪ Do not let children or animals climb on or under the bed. ▪ Do not use the bed without a mattress.

TARGET GROUP AND PREVIOUS KNOWLEDGE

This manual is addressed to adults. The following conditions are necessary: ▪ Basic technical knowledge. ▪ Ability to lift the components. ▪ Reading and understanding this manual.

SIGNAL WORDS USED IN SAFETY INSTRUCTIONS

DANGER Imminent danger to life of personsA safety notice containing the signal word DANGER indicates an imminent danger for life and limb of persons!Failure to observe these safety instructions can result in death or serious damage.

WARNING Danger of injury to persons (serious injury) and in addition possible material damage.A safety notice with the signal word WARNING indicates a dangerous situation which could have consequences for the health of persons!Non-compliance with these safety instructions can result in serious injury.

NOTICE This icon with the word NOTICE indicates the availability of supporting information for installation, operation and maintenance. Non-observation of these references may lead to property damage.

CAUTION Danger of personal injury (minor injuries) and in addition possible material damage A safety instruction with the signal word CAUTION indicates a potentially dangerous situation. Non-compliance with these safety instructions can result in minor injuries.

▪ Do not overload the bed (max. 700 lbs evenly distributed). ▪ Do not continuously move parts of the bed up and down.

NOTICE

The bed is not designed for continuous operation. Wait one minute after each complete driving cycle.


RESIDUAL RISKS

Although the highest diligence was taken during construction and assembly of the system and all safety relevant issues were observed, some risks that were evaluated in a risk analysis may re-main. In this chapter, all residual risks and warnings which result from the risk analysis are listed.

Read all instructions before using this bed.

DANGER To reduce the risk of electric shock:Always unplug this bed from the electrical outlet before cleaning.

WARNING Do not immerse any connection cables or any parts of the bed in liquid.

WARNING To reduce the risk of burns, fire, electric shock, or injury to persons:1. Unplug from outlet before putting on or taking off parts.2. Close supervision is necessary when this bed is used by, or near children, invalids or disabled

persons.3. Use this bed only for its intended use as described in these instructions. Do not use attach-

ments not recommended by manufacturer.4. Never operate this bed if it or any parts has a damaged cord or plug, if it is not working prop-

erly, if it has been dropped or damaged, or dropped into water. Return the bed for examina-tion and repair or replace it.

5. Keep cord away from heated surfaces.6. Never drop or insert any object into any opening.7. Do not use outdoors.8. Do not operate where aerosol (spray) products are being used or where oxygen is being ad-

ministered.9. To disconnect, turn all controls to the off position, then remove plug from outlet.10. Risk of injury – keep children away from extended foot support (or other similar parts).11. Risk of electric shock – connect this furnishing to a properly grounded outlet only. See Ground-

ing Instructions.

WARNING This bed can withstand maximum evenly distributed load of 700 lbs. Do not overload the sys-tem under any circumstances. Neither foot or head rest can withstand the maximum load alone.

WARNING Sitting on moving parts is forbidden as it may lead to property damage and injury. It is ok to lay on the bed during movement.

CAUTION If children are present, child lock must be activated.

DANGER It is forbidden to crawl under the bed. Moving parts can lead to serious injury or death.

DANGER Never reach under the bed during operation. Moving parts may lead to serious injury or death.

CAUTION It is forbidden to store foreign objects under the bed.

WARNING Make sure no foreign objects (e.g. nightstand or window) are in the way when operating the bed.

CAUTION Do not grab the side rails by moving parts. Always grab them by the rigid frame.

CAUTION Do not tilt the assembled bed upright to move it.

WARNING Disconnect the power supply before connecting or disconnecting any components. Otherwise electrical hazards might arise.


DANGER Do not open any electrical parts under any circumstances. This could lead to serious injury or death.

DANGER Do not modify any components of the bed.

DANGER Do not operate the bed in a potentially explosive atmosphere.

WARNING To disconnect bring the bed into the flat position, then remove plug from outlet.

WARNING Risk of injury: keep children away from the moving platforms.

WARNING Risk of electric shock: connect the power plug to a properly grounded outlet only. See ground-ing instructions.

SAVE THESE INSTRUCTIONS

ELECTRICAL GROUNDING

GROUNDING INSTRUCTIONS

This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in sketch A (see below). A temporary adapter that looks like the adapter illustrated in sketches B and C can be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adapter should be used only un-til a properly grounded outlet (sketch A) can be installed by a qualified electrician. The rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

FCC statement:Radio Frequency is 2.4 GHz

FCC ComplianceThis device complies with part 15 of the FCC rules. Operation is subject to the following two con-ditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceed-ing the RF exposure requirements and void user’s authority to operate the device.


PREFACE

Dear Customer,

Thank you for choosing a product from Yaasa.

With the Yaasa Adjustable bed you have a product that meets all safety requirements.

Wrong or unintended installation or use of the system might lead to several dangers. In chapter 1 “SAFETY” and by safety notes in the entire manual we point out various dangers which might appear.

This manual shall enable persons to assemble and operate the system safely.

Following the notes and warnings in this document helps avoid dangers and damage of the sys-tem. All persons working at and with the system must have the manual available when perform-ing tasks at and with the system. Furthermore, they must follow the relevant data and notes. The manual must always be complete and legible.

Yaasa Studios Inc. assumes no liability either for technical or printing errors nor for deficiencies in this documentation, furthermore there is no liability for damages caused directly or indirectly by the delivery, performance or usage of this documentation.

MANUFACTURER / SUPPORT

Yaasa Studios511 Olive StreetSanta Barbara, CA 93101USAhelp.yaasa.com

NOTICE In case of technical problems contact our support:Phone Number: 855-622-3711email: [email protected] mention product name and revision status when requesting support (see type plate).

02

LIABILITY

The descriptions of product characteristics in this operating manual do not constitute a gua-rantee of the presence of these characteristics.

No liability shall be assumed for defects or damage caused by any of the following reasons: ▪ Unintended use of the system. ▪ Disregard of this manual. ▪ Unauthorized modifications of the system. ▪ Improper work on and with the system. ▪ Operating the system when it is damaged. ▪ Improperly executed repairs. ▪ Unauthorized modification of operating parameters. ▪ Catastrophes, external influences or force majeure.

Introduction


The Yaasa Adjustable Bed is delivered in two boxes with all functional components and tools to fully assemble and operate the system. Upon opening the packaging make sure all listed parts are included and in perfect condition. In an unlikely case of parts being damaged or missing please contact Yaasa (chapter 2 INTRODUCTION). Make sure the boxes are stored horizontally in a dry place at room temperature.

03

A SIDE RAIL (LEFT)

B SIDE RAIL (RIGHT)

QUICK START GUIDE MANUAL

REMOTE CONTROL

ASSEMBLY SUPPORT

2x AAA BATTERIES

SIDE TO SIDE CABLE

2x CROSSBARC

PLATFORM ELEMENT (HEAD)

HEAD

K

PLATFORM ELEMENT (BASE)

BASE

L

PLATFORM ELEMENT (LEG)

LEG

M

PLATFORM ELEMENT (FOOT)

FOOT

N

14X MOUNTING SCREWO 4X MOUNTING SCREWP

2x CORNERCONNECTORCOVER (TYPE A)

E 2x CORNERCONNECTORCOVER (TYPE B)

F

POWER CONVERTERG

POWER CABLEH

I

2X USB MODULEJ

TOOL

4x LEGD

Box Contents

The Yaasa Adjustable BedQuick Start Guide

The Yaasa Adjustable BedOwner‘s Manual


B

C

C

A

NECESSARY TOOLS AND EQUIPMENT

The Yaasa Adjustable Bed is intended to be built by two adults. No additional tools or equipment is necessary. All needed tools are included. Make sure enough space is available to manipulate all parts during assembly. Slightly more space than the finished bed requires is recommended for the assembly process. All important steps, parts and movements are shown with grey indicators.

UNBOXING AND LAYING OUT THE MAIN PARTS

Lay both boxes flat on the ground with the graphic and logo facing up. Carefully open all boxes and check its content as described in chapter 3 BOX CONTENTS.

NOTICE Do not use a knife or sharp objects to open the boxes as it may lead to damage of the product.

NOTICE Before starting the assembly make sure all parts have reached room temperature. Too cold or warm parts may lead to problems during the assembly.

CAUTION Sharp edges. Be careful when handling any mechanical parts. Do not touch any sharp edges.

CAUTION Do not lift the side rails by moving parts. Always lift them by the rigid frame.

04Take out all internal boxes. Open the pack-aging of the side rails (A, B) and crossbars (C) and lay them out as seen on the picture.

Use the stickers on the parts to find the right position and orientation.

CONNECTING THE BARS

1

2

3

4A

B

C

C

Follow order as shown (1-4). Slide the side rails (A, B) into the crossbars (C) until you reach the first stop. Shown in detailed views on page 18.

NOTICE Use the packaging material to prevent damage of parts and the floor when laying them down.

WARNING SMALL CHILDREN AND PETS WARNINGAfter your Yaasa Adjustable Bed has been unboxed, immediately dispose of packaging as it can smother small children and pets. To avoid injury, children and pets should not be allowed to play on or under the bed. Children should not operate this product without adult supervision. Close supervision is neces-sary when this furnishing is used by, or near children, invalids, or disabled persons.

DO NOT REMOVE RIBBONS

LOOK AT LABELS ON FRAME ELEMENTS

Assembly


NOTICE Do not lift one side of the bed higher than necessary to put the Crossbar on the Assembly support.

CAUTION Lift the frame only by the center of the crossbar.

Slide the two parts together by aligning the bracket on the side rail (A, B) with the groove on the crossbars (C).

C B

1

2

Press the two parts together (1) and the crossbar down (2) until the top of both parts are flush and the crossbar (C) have proper contact with the brackets of the side rail (A, B).

connecting bars 2 – detail

INSTALLING LEGS

D

D

D

D

TU

RN

TO

LOC

K

TOOL

Insert the supplied assembly tool (TOOL) and turn the wheel clockwise. Tighten con-nector wheel hand tight.

TU

RN

TO

LO

CK

TOOL

Hint: The arrow on the side rail indicates the correct direction.

4x 2x 4x 2x

P

P

Remove the Assembly Support and repeat the previous step on the head end of the bed in order to assemble the remaining legs. Then take out the Assembly Support.

Lift up the frame by the center of one cross-bar, place the frame on the provided assem-bly support (ASSEMBLY SUPPORT) and tighten the two legs (D) with the screws (P).Hint: Only one screw required per leg.

Repeat the following steps at all four corners:


J

H

G I

J

F

F

E

E

ADDING CORNER COVERS CONNECTING CABLES

NOTICE Stretch the side to side cable (I) to the appropriate length before connecting to avoid excessive tension on the connectors.

2x

E

2x

F

J

12 pin 12 pin2 pin

2 pin

10 pin

I I JG

J J

Create a loose loop with the USB-cable (J) and run the cable through the designated channel. Place the 2 USB-modules outside of the frame.

Connect the two side rails with the side to side cable (I) by plugging it into the appropriate connector.

Connect one USB-mod-ule (J) on each side. Use the black two pin connec-tor (see detail below).

Connect the power con-verter (G) to appropriate connector.

Place the corner covers (E, F) in their position and click them in place.


L

K

L

M

N

ADDING PLATFORM ELEMENTS

Lay out the platform ele-ments (K, L, M, N) and align them with the threaded holes on the side rails (A, B).

Start with the large head el-ement (K), followed by the base (L), leg (M) and foot (N) element.

NOTICE While placing the platform elements (K, L, M, N) be careful not to trip over the side to side (I) or the power cable (H).

Use the 14 mounting screws (O) to fix all the platform elements by hand. Screw them in hand tight.

ATTACHING THE USB-MODULES

CONNECTING THE POWER CABLE

Connect the power cable (H) to the power converter (G) and run the cable to the nearest power outlet without tensioning the ca-ble. Lay the cable behind the bed and near walls to avoid tripping over the power cable.

Refer to the grounding instruc-tions for information about proper grounding.

NOTICE Do not put strain on any cables.

G

H

REMOVE ALL RIBBONS BEFOREMOUNTING THE PLATFORMS !

Bring the two USB-modules (J) into their final position by clicking them onto the preinstalled mount-ing plates under the base element.

2x JFOOT

HEAD


INSERTING BATTERIES

NOTICE Do not use rechargeable batteries.

NOTICE Replace the batteries of the remote control once a year.

NOTICE Do not place the assembled bed flush against the wall to avoid damage to the bed and the wall. Keep a small distance.

Insert the two provided 1,5V AAA batter-ies and slide the cover in position.

BEFORE USING YOUR YAASA ADJUSTABLE BED FOR THE FIRST TIME

Your Yaasa Adjustable Bed is almost ready, pleasure follow these steps before using:• Put a mattress on the Yaasa Adjustabled Bed• Plug in your Yaasa Adjustable Bed• Activate your bed with the remote control FOR ADDITIONAL ASSISTANCE

Please contact Yaasa Studios:

Phone: 855-622-3711E-Mail: [email protected]

Or visit help.yaasa.com


DISASSEMBLY

To disassemble Yaasa Adjustable Bed follow the actions of the assembly instructions in reverse order.

NOTICE After the side to side cable gets unplugged and reconnected a drive reset must be performed.Perform a drive reset by pressing the Flat Position button for at least 15 seconds. The remote control displays “F” to confirm the input. Then the bed will move into the flat position and resets the drive position.

05

To minimize the risk of pinch-ing when transporting the side rails, secure all moving parts with packaging tape by wrap-ping it all around the shown ar-eas.


TRANSPORTATION

The fully assembled bed may only be moved a moderate distance to adjust the position in a room. To move the bed one person must lift the bed on each of the side rails.


CAUTION Do not tilt the assembled bed upright to move it.

NOTICE Do not tilt the bed to move it. Do only move in horizontal position.When moving to a different location, the bed must be disassembled.

Disassembly & Transportation


REMOTE CONTROL

The remote control allows you to move all parts of the bed from up to 23 feet (7m) away. There can be up to two remote controls connected to one bed. The buttons on the remote control func-tion as follows:

06

CAUTION Activate Child Lock when children are present.

PRECONFIGURED MEMORY POSITIONS

The system comes preconfigured with two distinct positions. Each saved on one memory posi-tion key:

RESET OF MEMORY POSITIONS

1 Anti-Snore positionGently raises your head, opens up nasal airway passages and helps prevent snoring.

2 Zero Gravity positionRelieves pressure from your back & spine, promotes bet-ter blood flow and creates a weightless sensation through-out the body.

1 215 sec 1x

1 2

LED arrayThe animated LED array changes according to the currently used function.

1 2

Head Position Up and DownUse the arrow keys to move the Head Position up and down. It will move until you release the key or you reach the highest or lowest position.

1 2

Flat PositionPress this button to automatically flatten the bed surface.

1 2

Foot Position Up and DownUse the arrow keys to move the Foot Position up and down. It will move until you release the key or you reach the highest or lowest position.

Favorite Position 1To recall the memory position, simply press the button (less than 3 seconds) and the bed moves automatically to the saved po-sition. To store a favorite position, move the bed to the desired position and press the button for at least 3 seconds. The default setting for this button is Anti-Snore

Favorite position 2To recall the memory position, simply press the button (less than 3 seconds) and the bed moves automatically to the saved po-sition. To store a favorite position, move the bed to the desired position and press the button for at least 3 seconds. The default setting for this button is Zero-Gravity

1 2Child Lock Hold for three seconds to disable or enable the Child Lock. The remote control displaying an L when pressing any button will in-dicate that the child lock is activated.

To reset the Memory Position buttons to their precon-figured positions you need to perform a default reset. (1) Press the Head Position down and Foot Position down simultaneously for at least 15 seconds.

(2) Now press any key (except Child Lock) until the bed moves into the flat position. The reset was successful once you reach the lowest position.

Operation


CLEANING

WARNING To reduce the risk of electric shock: Always unplug this bed from the electrical outlet before cleaning.

To clean any parts of Yaasa Adjustable Bed only use a dry or damp lint free cloth. Do not get any parts wet during cleaning.

NOTICE Do not use any cleaning agent to clean Yaasa Adjustable Bed as it may damage the surface fin-ish. Non-alcohol based cleaners, sanitizers or others can destroy the anodized layer.

MAINTENANCE

The Yaasa Adjustable Bed is maintenance-free. In case of any damage or problem please con-tact Yaasa:

07

Insert two 9V battery blocks into the power converter. Do not use rechargeable batteries.Make sure no heavy object or any person is on the bed or in the range of moving parts.Press the button on the power supply until the bed is in the flat position.

08

BEHAVIORRemote does light up but bed does not respond to button presses.

Remote does not light up during button presses and bed does not respond.

Parts of the bed remain in elevated position during power failure.

POSSIBLE CAUSE / SOLUTION1. Check power connection of the bed.2. Possible overheating after continuous use.

(The bed is not designed for continuous operation. Wait one minute after each complete driving cycle.)

3. Unplug the power converter until the LED goes out and plug it back in.

Replace the batteries of the remote control.

Unplug the power converter from the power connection. Remove the cover of the power converter:


Cleaning &Maintenance

Unusual Behavior & Solutions


After this action, the batteries must be replaced.If batteries are stored in the power supply as a backup they must be replaced annually.

Press the button on the power supply until the bed is in the flat position:

Remote control defective or lost.

Parts of the bed do not move evenly.

Make sure the bed is leveled evenly. Make sure no heavy ob-jects or any person is on the bed or in the range of moving parts.

Perform a drive reset by pressing the Flat Position button for at least 15 seconds. The remote control displays “F” to confirm the input. Then the bed will move into the flat position and re-sets the drive position.

Side to side cable gets unplugged.

Side to side cable gets unplugged during movement.

Plug in the side to side cable. Perform a drive reset by press-ing the Flat Position button for at least 15 seconds. The re-mote control displays “F” to confirm the input. Then the bed will move into the flat position and resets the drive position.

Unplug the power converter until the LED goes out and plug it back in.

Plug in the side to side cable. Perform a drive reset by pressing the Flat Position button for at least 15 seconds. The remote control displays “F” to confirm the input. Then the bed will move into the flat position and resets the drive position.

WARNING Using the button on the power converter to lower the bed will override the Child Lock feature. Make sure no children or pets are near moving parts when performing this action.

WARNING By inserting batteries into the power supply the bed can be moved even if not connected to the mains and when the Child Lock function is activated.


09

PROPERTYInput VoltageRated Input currentSuitable mattress dimensionsAmbient conditionsMaximum load

SPECIFICATION100-240 V1.8 AKing76 in × 80 in

Queen60 in × 80 in

TwinXL39 in × 80 in

Indoor use only700 lbs evenly distributed

10

NOTICE Dispose parts of this product during the final shutdown environmentally friendly and mono fractional.

PRINCIPLE

Be aware of the raw materials which form the basis of the bed. This product does not belong in the municipal trash. Most components of this product are recyclable. Please protect our environ-ment for future generations and dispose responsibility. Consult local authorities regarding local laws, regulations and resources for responsible and proper disposal of this product.

Technical Data

Final Disposal

Page Intentionally Left Blank

36 // YAASA ADJUSTABLE BED OWNER‘S MANUAL

FOR ADDITIONAL ASSISTANCE

Please contact Yaasa Studios:


Or visit help.yaasa.com

the yaasa adjustable bed · the yaasa adjustable bed may solely be used for the intended use...

Documents