the vanzandt commitment our locations · rotork k-tork series vane pneumatic • compact design •...

Hobbs, NM905 North Grimes Street

575-942-2671Tulsa, OK

Canyon, TX700 Hwy 60 POB 1056

806-655-9367Houston, TX

5115 Ashbrook Drive713-664-2918

Deer Park, TX4904 Railroad Street

832-821-7333San Antonio, TX

3031 Interstate Drive210-693-0430

Odessa, TX | 13409 WCR 132 | 432-242-8000 | vanzandtcontrols.com

1st to Quote 1st to Deliver Reliable Service

T H E V A N Z A N D T C O M M I T M E N T

Automated Valves, Flow Measurement & Instrumentation

Our Locations

Hobbs

Odessa

Canyon

San Antonio

Houston

Deer Park

Tulsa

8278 South Regency Drive918-216-1058

Controls, LLC

Controls, LLC

1 • 432-242-8000

VANZANDT INDEX

SAFETY & SERVICE CULTURE 2

VALVE AUTOMATION: ELECTRIC 3

VALVE AUTOMATION: PNEUMATIC 9

CONTROL VALVES 14

FLOW MEASUREMENT 17

INSTRUMENTATION 19

VALVES 28

VENDOR MANAGED INVENTORY 33

IN HOUSE MACHINE SHOPS 34

SERVICE 35

OUR TEAM 36

2 • 432-242-8000

Our number one priority is that every employee works safely at all times Working safe is an integral part of the culture at VanZandt Controls Our goal is to complete each task, each day, incident free We have partnered with Lonestar USA Safety & Training and ISNetworld to ensure all of our safety practices are the best in the industry and all of our employees are trained by the best trainers in the industry

Each operational employee must attend the SafeLand Training 8-hour course All VanZandt Employees are trained on a wide range of safety topics, including hazard communication, personal protective equipment, confined spaces, electrical safety, lockout-tagout, back and lifting safety, hazardous waste response, heat stress, hand and tool safety, forklift certification, driving safely, and many more

We utilize the following to ensure customer compliance:• Job Safety Analysis• Safety Training Classes• Safety Compliance and Best Practices• Monthly Facility Inspections

ZERO Lost Time Accidents 2014 to 2019 ONLY ONE OSHA Recordable 2014 to 2019

SAFETY & SERVICE CULTURE

VanZandtControls com • 3

VALVE AUTOMATION: ELECTRIC

• Spring Return Failsafe • Battery Backup Failsafe

• Open/Close • Modulating Control 4/20 MA

4 • 432-242-8000

Electric Heavy Duty Valve Actuators

ADC Series Actuators In Stock!!!!

• Features of The ADC Series Actuator • Universal Power (12VDC, 24VDC, 120VAC,

220VAC)• Hand Wheel Over Ride • Class 1 Div 1 and 2 Explosion Proof/

Weatherproof Available Also • Nema 4, 4X, 6, 7, and 9• Heater and Thermostat • Comes with Internal Battery to Fail Actuator to

the open or closed position with loss of power • Can be programmed for open/close or

modulating 4/20MA Control • Low Power Consumption and AMP draw

Great Actuator for Multitude of Applications:

• ESD• Vee ball valve• Butterfly valves• Damper control• Lact Divert Valve• Header Divert Valve• Open/close, SWD• Loading Station


Electric Mechanical Spring Return Valve Actuators

FQX Fail Safe Actuators

• Actuators available in 24VDC, 120VAC, 220VAC & 3 Phase 460 VAC Power

• Hand wheel Over Ride • Class 1 Div 1 and 2 Explosion Proof/

Weatherproof Available Also • Nema 4, 4X, 6, 7, and 9• Heater and Thermostat • Comes with Mechanical Spring to Fail Actuator

to the open or closed position with loss of power

• Modulating 4/20MA Control Board Available


• ESD• Vee ball valve• Butterfly valves• Damper control• Lact Divert Valve• Header Divert Valve• Open/close, SWD• Loading Station

6 • 432-242-8000

Electric Mechanical Spring Return, Super Caps Failsafe and Open/Close Valve Actuators

Electro-Hydraulic Fail Safe (SRE Series) and Super Caps Failsafe Actuators (CMA/CVA Series)


• 120VAC Actuators In Stock • Hand Pump Over Ride on SR and Hand Over

Ride on Super Caps • Class 1 Div 1 and 2 Explosion Proof/

Weatherproof Available Also • Nema 4, 4X, 6, 7, and 9 • Mechanical Spring or Super Caps to Fail

Actuator to the open or closed position with loss of power

Electric Open/Close and Modulating/Control Valve Actuators Available

• Multi-Turn and Quarter Turn Available • Actuators available in 24VDC, 120VAC,

220VAC & 3 Phase 460 VAC Power• Varies Ranges and Voltages Available in Stock • Class 1 Div 1 and 2 Explosion Proof/

Weatherproof Available Also • Nema 4, 4X, 6, 7, and 9


• ESD• Vee ball valve• Butterfly valves• Damper control

• Lact Divert Valve• Header Divert Valve• Open/Close• SWD

• Loading Station• Pipeline Control


Electric Open/Close and Control Valve Actuators

XE and WE Series Actuator



Weatherproof Available Also • Worm Gear Driven• Nema 4, 4X, 6, 7, and 9• Heater and Thermostat • Actuator Fails In Place with loss of power-

Actuator can be made Fail Safe by External means



• Vee ball valve• Butterfly valves• Damper control• Lact Divert Valve• Header Divert Valve• Open/Close• SWD• Loading Station

8 • 432-242-8000

Electric Open/Close and Control Valve Actuators

Icon Series Actuator



Weatherproof Available Also • Worm Gear Driven• Nema 4, 4X, 6, 7, and 9• Heater and Thermostat • Actuator Fails In Place with loss of power-

Actuator can be made Fail Safe by External means



• Gate Values• Expanding Gate Valves• Plug Valves• Vee ball valve• Butterfly valves• Damper control• Lact Divert Valve• Header Divert Valve• Open/Close• SWD• Loading Station


VALVE AUTOMATION: PNEUMATIC

• Spring Return Failsafe • Control Valves

• Open/Close • Modulating Control 4/20 MA

• I/P’s • Limit Switches

• Solenoid Valves • Regulators

• Volume Booster

10 • 432-242-8000

Pneumatic Spring Return and Double Acting Valve Actuators

Rotork GT Series Rack and Pinion Pneumatic

• Compact and Light Weight Design• Available in Spring Return Fail closed or Open with Loss of Power and Double Acting• Anodized Aluminum Housing

Rotork K-Tork Series Vane Pneumatic

• Compact Design• Light Weight • Available in Spring Return Fail closed or Open with Loss of Power and Double Acting• Powder Coated Aluminum Housing (Coated Inside and Out)• Highest Cycling Pneumatic Actuator

Rotork GP Series Actuators

• Heavy Duty Scotch Yoke Pneumatic Actuators • Available in Spring Return Fail closed or Open with Loss of Power and Double Acting• Steel Housing







Triac THD and SY Series Actuators

• Heavy Duty Scotch Yoke Pneumatic Actuators • Available in Spring Return Fail closed or Open

with Loss of Power and Double Acting• Steel Housing

Triac Rack and Pinion Pneumatic

• Compact and Light Weight Design• Available in Spring Return Fail closed or Open

with Loss of Power and Double Acting• Anodized Aluminum Housing





12 • 432-242-8000


Air Torque Rack and Pinion Pneumatic

• Compact and Light Weight Design• Available in Spring Return Fail closed or Open

with Loss of Power and Double Acting

• Anodized Aluminum Housing

Great For Low PSI Applications!

Viton seals available for natural gas supply applications







Morin B Series Actuators

• Heavy Duty Scotch Yoke Pneumatic Actuators • Available in Spring Return Fail closed or Open with

Loss of Power and Double Acting• Ductile iron with Stainless Steel Cylinders

Morin C Series Actuators


Loss of Power and Double Acting• Ductile iron with Carbon Steel Cylinders

Morin S Series Actuators


Loss of Power and Double Acting• Full Stainless-Steel Housing and Cylinders


• ESD• Vee ball valve• Butterfly valves

• Damper control• Header Divert Valve• Open/Close

• SWD• Loading Station• Pipeline Control

14 • 432-242-8000

CONTROL VALVES

• Level Controllers • Vee Ball Valves

• Severe Service Valves • Globe Style Valves

• Pressure Controllers • Positioners

• Regulators • Butterfly Valves

** All Remanufactured Fisher products are backed by a 2 year warranty**

Remanufactured Fisher Products


Mascot Control Valves

We stock various sizes and configurations for FAST deliveries!!

Piston Style Actuators! Actuator Fail Positions can be changed in the field and handle up to 150 PSI of Supply Pressure!! Actuators can be changed for gas!

Eccentric Plug Valves Globe Style Valves

Butterfly ValvesVee Ball Valves

We also can do, High Performance Flush Bottom Discharge Valves, Desuperheater valves, Choke valves, Large Volume Valves, Anti Cavitation Control Valves, and many other various types of control valves

16 • 432-242-8000

Innovative measuring and control technologies solutions for flowing media

The GS valve is a high-performance variable orifice control valve Known as a sliding gate valve, the GS3 seat design features a non-turbulent, straight through flow path The flow is broken apart into multiple streams creating a reduced field of energy The result is greater service life, quieter operation and a control valve that performs at the highest levels possible within extreme conditions Maximized temperatures and pressures, 986 F and 1,450 psi Sizes 1/2″ – 10″ Carbon Steel, 316 Stainless Steel, and Hastelloy C4

The Ball Sector Valve especially designed to handle arduous duties, slurries and viscous fluids is suitable for control and isolation With pneumatic and electrical actuators, it is the best choice for very precise control in for example the paper, steel, chemical, food and effluent industries

Globe valves are available in two categories, conventional and angle globe These control valves feature integral top mount positioners; pneumatic, analogue and digital Motor operators are also available for both on/off and positioning control Sizes available are 1/4″ through 3″ Control valves are 316 stainless steel and on/off motorized versions also available in bronze


FLOW MEASUREMENT

18 • 432-242-8000

Insertion Thermal Mass Meter

The QuadraTherm® 640i is the most accurate insertion-probe thermal mass flow meter for air / gas mass flow rate measurement on the market today, achieving gas mass flow rate accuracy never before possible, +/- 0 75% of reading above 50% of full scale The QuadraTherm 640i air / gas mass flow meter marks an accuracy breakthrough in thermal dispersion technology achieving extreme precision with “percent of reading” accuracy, which for the first-time rivals’ accuracies of Coriolis technology for measuring mass air flow rate and other gases

Each QuadraTherm thermal flow meter comes with onboard qMix(tm) gas mixing software which allows you to create custom gas mixtures in the field to compensate for gas compositional changes-no costly recalibration needed Perfect for managing changes in flare gas composition in the field for upstream oil & gas flare gas measuring applications and other applications in which gas composition frequently changes All meters VanZandt Controls stocks comes with calibration cable so customers can make those changes in the field Units come off the shelf with a pre-set gas analysis for similar to what we see in West Texas and South-east New Mexico to get your project/flare up and going and you can make adjustments in the field once you know what your gas composition is

VanZandt Controls stocks this product off the shelf good for pipe sizes 2” to 18” inch!! All metal sensor can handle being hit with liquid without having to be sent back in/to factory to be re-calibrated Once liquid comes off sensor it goes back to reading accurately unlike competing brands on the market


INSTRUMENTATION

• Gauge multi-port Valves• Tuning level Forks• Solenoid Valves• Fire-Eye• Tubing Fittings• Stainless fittings• Needle Valves• Stainless Tubing• Welker Filtration and

Instruments• Heat Trace• Pressure Gauges

• Differential Pressure Gauges

• Vibration Sensors/switches• Instrument Ball Valves• Guided Wave Radars• Level Switches• Temperature Switches• Pressure Switches• Thermometers• Thermowells• RTD’s• Thermocouples

• Pressure Transmitters & Transducers

• Temperature• Transmitters• Differential Pressure

Transmitters• Pilot Switches• Regulators• Volume Boosters• Coalescing Filters

20 • 432-242-8000

Fitting Bins and Material Shelves Available - Maintained and stocked by VanZandt at your required levels.

Stainless Steel coiled & stick tubing

Superlok tube fittings are the world’s first smart fittings with

built-in gap gauge for safety and accuracy.

Instrument stainless threaded fittings

Compression Check Valves Threaded Check Valves Relief Valves Manifolds

Compression ball and needle valves Threaded needle valves Threaded ball valves

Installation Procedure

**Bleed & Purge Valves, Tubing Clamps, Micron Inline Filters, Micron Tee Filters, High Pressure Fittings, Quick Connects, Block and Bleed Valves and Other Items Available***


Sitron VTK tuning forks in stock!

We stock various sizes and configurations for FAST deliveries!!

Sitron VTK series of vibrating tuning forks are an ideal solution for many point level detection applications because they are unaffected by either the dielectric or the conductivity of the medium When the tuning fork is submerged in the medium the frequency at which at which it vibrates changes This change is detected by the unit’s electronics and is converted into a switch output Housings have glass ends for visual indication of status of switch Several time delay settings available next to switch termination block Set by dip switches

Sitron VDX500 Vibration transmitter/Switches in stock!

• 3 in 1 device Vibration transmitter switch, with local display and controls

• Bright 3 digit LED display• Vibration range available up to 2 in/s RMS• Vibration units: mm/s, in/s, and % percentage• Enclosure rating is explosion proof

• 2x SPDT programmable relay with independent time delays and 4/20MA 9non isolated) analog output

• Easy configuration from front keys-Set and reset values switch with both time delay set

Sitron ST90A/GPX external mount temperature transmitter!

• Non intrusive design • Easy to install mounting bracket• Large stand off enables height over insulation• Spring loaded sensor guarantees constant

contact

• Standard and customizable bracket available • Reliable temp measurement via Hart and

4/20mA

22 • 432-242-8000

• Differential Pressure Indicators

• Switches and Indicating Switches including Hazardous Location Models

• Valves & Manifolds - Hand Valves

• Gauge Valves,• Multi-Port Gauge Valves• Venting Gauge Valves

• Stainless housing pressure gauges

• Gauges have built in dampened• Movement points so gauges

don’t need glycerin filling but are fillable

ASCO solenoid valves control critical flow of air, gas, water, oil, and steam in applications spanning numerous industries Ranges from two-position on/off valves to flow control systems that impact thousands of users ASCO’s RedHat power management technology sets a new industry standard for reliability and power consumption, accepting both AC and DC voltages while improving performance These 2-way, 3-way and 4-way solenoid valves can handle most fluid control applications and are available for most approvals Variety of Solenoids in Stock!!!

Go Switch proximity switches in stock! Perfect for position indication for control valves, manual valves, and well head gate valves!!


Filter/regulators, I/P’s, Coalescing filters, Hi/low pressure relays, Volume boosters etc

Fairchild’s wide selection satisfies your instrument or industrial control applications Fairchild pneumatic regulators are available as: precision, back pressure, miniature, filter service, stainless steel, motorized, low pressure and specialty

Pressure, Temperature, and D/P Transmitters IN STOCK!!

24 • 432-242-8000

Vapor ActuatedThermometer

Thermometers Thermowells StabilizedConnectors

RTD Connect Heads

We stock heat trace cable, power connection kits, end seals, 360 degree LED lights, and other heat trace accessories.

RTD Transmitters Swivel Adaptor Diaphragm SealsComplete Temp Setups

Pressure Transducers Digital Pressure Gauges

Digital Temp Indicators

Hammer UnionPressure Traducers

HEAT TRACE

26 • 432-242-8000

K-Dyne level switches come in pneumatic or electric, flanged or threaded These switches come in the high-level orientation from factory but are easily changed from hi to low by simply unscrewing the 4 bolts on face of switch and turning 180 degrees You can also change the same switch from electric to pneumatic by un-bolting the 4 screws on the face to convert Switch can be cleaned if pneumatic or the electronic switch changed while vessel/tank is in service without de-pressuring and draining tank by un screwing the 4 face bolts and taking off to clean or swapping bad electronics due to power surge or other reasons These switches are great for interface, high level and low level Switches come set for oil or water but can be used for condensate or other low specific gravity fluids by simply adding an adjustable spring cap to your existing switch or adding this to it Level switches typically mount to the side entry of a vessel or tank via threaded or flanged connection however these switches have an option of mounting to the top of a tank using a T-80 adaptor that can be flanged or threaded and switch length can be trimmed in the field to drop down into various size tanks K-Dyne also offers float chambers in threaded and flanged connections K-Dyne is 100% made in the United States! VanZandt keeps various K-Dyne level switches and accessories in stock!

The K-Dyne, Inc Model P40 Pneumatic Pressure Switch was specifically designed for the rigorous oilfield environment If functions as easy as a 3-way “block and bleed” valve that can be configured to respond to increasing or decreasing process pressures Can also be setup with 2 switches one for a low pressure to see if equipment or application is losing pressure and with high pressure switch to shut equipment down or close a valve Once closed or shutdown and pressure gets back below, above, or between setpoints you can have it were switches automatically let equipment or actuated valves open or you can add a latch/manual relay that has to be reset before equipment or actuated valve can open or equipment turn back on

The standard unit utilizes a patented system which provides three piston diameters that are selected by simply changing the orientation of one part When used in combination with one of the three available spring sizes, the Model P40 offers sensing ranges from 10 to 10,000 psi without the purchase of additional bases or pistons Can be used to shutdown various applications pneumatically and also available in the E-stick with a 150 psi rated solenoid Pilot switches and accessories in stock!


Burner controls & flame safeguard

High integrity flame safeguard and combustion efficiency products

Integrated & discrete scanners

Sophisticated high technology flame scanners which accurately detect the presence or absence of flame in a single or multi burner environment Our scanner families include integrated as well as those that require a separate amplifier module

Igniters

Fireye provides the SureFire igniter line for the reliable light off of large industrial burners and boilers in various utility applications High Energy Igniters (HEI) are Class 3 igniters used for direct spark ignition of oil or gas igniters and small burners

28 • 432-242-8000

VALVES

Master Stocking Distributor for Piper Valves!!! Piper valves come in various connection styles to meet pressure, bolting, and various standards and applications Piper valves are easy to repair and one of the most dependable and robust valves on the market! Valves can be welded in, threaded, API flanged to go on well heads (1-13/16, 2-1/16, 2-9/16, ETC), 1502 hammer union ends, put in manifolds, ETC Automated or manually operated VanZandt keeps various sizes and styles in stock!!!


Gate, Globe, and Check valves

Available in various different Sizes, connections, and materials

Threaded and flanged ball valves

Available in various materials and pressure classes

Oil field tank battery general purpose ball valves and check valves in Carbon steel and ductile iron available

VanZandt is a stocking distributor for Flo-Tite valves! Flo-Tite is a great source for Ball valves, multi-port valves, segmented control valves, actuators, and various other valves.

30 • 432-242-8000

Cryogenic, isolation, spray, instrument, double block and bleed, self-cleaning, multiport, tank bottom, low emission, steam trap, spring less check, transmitter isolation, flush and bleed ring, fire rated, manifold, and other type valves

• Lined ball, butterfly, plug and check valves

• Sleeved severe service plug valves

• Matryx vane style actuators • Triple offset and special

purpose butterfly valves

• Valve position monitoring • Digital and smart

positioning

• Industrial diaphragm valves • Both weir and straight

through styles • Playing a vital role in flow

control • Great for chemical, mining,

and water


Choke control valves available in various connection types, pressure classes, materials of construction, sizes, and trims Great for pressure control for gases or fluids

• Trunnion mounted ball valves

• Multi port ball valves • Segmented vee balls• Stainless in stock!!!

• HP & resilient seated butterfly valves

• Threaded and flanged ball valves

32 • 432-242-8000

Choke control valves available in various connection types, pressure classes, materials of construction, sizes, and trims Great for pressure control for gases or fluid and to hold back pressure on pumps to keep them in their curve for efficiency

We have access to many actuators and valve types, brands, material, pressure class, ETC.

We stock 3” and 4” Cyclonic valves, ready to ship!


VENDOR MANAGED INVENTORY

The Markets We Serve

UPSTREAM MIDSTREAM DOWNSTREAM

VanZandt Controls is excited to offer an instrumentation vendor managed inventory (VMI) program like no other. What makes ours different? With the help of a 32’ foot enclosed mobile warehouse, we are able to carry approximately $100,000 worth of the industry’s safest stainless steel tubing and pipe fittings, sensors, transmitters, regulators, instrument valves (gauge,solenoid, needle,etc.) as well as heat trace & industrial batteries. The mobile warehouse allows us to setup and restock bins in real time.

The VMI program is staffed by a dedicated individual whose sole responsibility is managing inventory for our VMI customers.

Let us be your provider for key instrumentation and components for all your construction or I&E needs.

34 • 432-242-8000

IN HOUSE MACHINE SHOPS

We have In House Machine Shops in multiple of our locations for the ability to make mounting hardware and linkages for various types and sizes of valves


SERVICE

We Service What We Sell!!

• We have service techs and trucks to maintain and service actuators we sell!• We do field and plant retrofits • We build panels for actuators

36 • 432-242-8000 VanZandtControls com • PB

OUR TEAM

Odessa, TexasJill RogersInside [email protected]

Robert ChaconInside [email protected]

Price ThompsonInside [email protected]

Parker HinesleyInside [email protected]

Jackie OlivaInside [email protected]

John GonzalesOutside [email protected]

Justin BurksOutside [email protected]

Ervey PinedaOutside Sales [email protected]

Joel StahmerMeasurement Product [email protected]

Jeff WessonVP Permian [email protected]

Lance VanZandtVP Sales & Business [email protected]

Canyon, TexasKaitlynn PeirisInside [email protected]

Alexia CriswellInside [email protected]

Lucas MarquezOutside [email protected]

David CriswellSales - Capital [email protected]

Stoney LeeBranch Manager & [email protected]

Dallas, TexasChris FierroBusiness [email protected]

Deer Park, TexasLindsey HowellInside [email protected]

Jon BlackwellInside Sales832 859 [email protected]

Marcus BrooksOutside [email protected]

Chris PfeiferOutside [email protected]

Thad ShippBranch Manager832 207 [email protected]

Houston, TexasMike LinderInside [email protected]

Tana TarrInside [email protected]

Kenny JanacekOutside [email protected]

Marc LairdBranch Manager & Outside Sales832 499 [email protected]

Lubbock, TexasCraig AlexanderOutside [email protected]

San Antonio, TexasJimmy BodenhamerInside Sales713 854 [email protected]

Chris VachonOutside [email protected]

Keith StroupBranch Manager & Inside [email protected]

Jeff WardVP Gulf Coast [email protected]

Hobbs, New MexicoAmy GarzaInside [email protected]

David MurilloOutside [email protected]

Mike Pierceoutside [email protected]

Cynthia BowBranch Manager & Inside [email protected]

Tulsa, OklahomaJesse GreenOutside [email protected]

Jarod CarmichaelBranch Manager & Inside [email protected]

Hobbs, NM905 North Grimes Street

575-942-2671Tulsa, OK

Canyon, TX700 Hwy 60 POB 1056

806-655-9367Houston, TX

5115 Ashbrook Drive713-664-2918

Deer Park, TX4904 Railroad Street

832-821-7333San Antonio, TX

3031 Interstate Drive210-693-0430

Odessa, TX | 13409 WCR 132 | 432-242-8000 | vanzandtcontrols.com

1st to Quote 1st to Deliver Reliable Service

T H E V A N Z A N D T C O M M I T M E N T

Automated Valves, Flow Measurement & Instrumentation

Our Locations

Hobbs

Odessa

Canyon

San Antonio

Houston

Deer Park

Tulsa

8278 South Regency Drive918-216-1058

Controls, LLC

Controls, LLC

the vanzandt commitment our locations · rotork k-tork series vane pneumatic • compact design •...

Documents