Intelligence at the Network Edge

Class IDIvIsIon 2

The Right Connection for

Certified For Hazardous LocationsFor applications that require C1/D2 certification, B+B SmartWorxhas a selection of connectivity and communication solutionsdesigned to operate in hazardous environments.

+

Class I/Division 2 safety certification is a mandated requirement for devices in many industrial applications, and for good reason. A Class I/Division 2 hazardous location is defined as an area in which flammable gases, vapors or liquids may potentially be present. A Class I/Division 2 certified device is specifically designed and manufactured to reduce the risk that it will produce an electrical discharge that could serve as the ignition point for a fire or explosion.

From serial servers and media converters to network gateways and switches, Advantech B+B SmartWorx designs and builds the Class I/Division 2 certified connectivity equipment you need to meet regulatory standards and establish safe, reliable data communications in potentially hazardous environments.

CLASS I/DIVISION 2 DATA COMMUNICATIONS EQUIPMENT FOR SAFE OPERATION & REGULATORY COMPLIANCE

www.advantech-bb.com

CERTIFICATIONS - CELLULAR ROUTERSUL Class I/Division 2 ATEX Zone 2IEC61000-6-2:2005ETSI EN 301 489-1 v1.9.2EN 55022:2010EN 60950-1:06 ed.2EN 62311:2008CARRIERS: Verizon, AT&T, T-Mobile, Rogers, Telus

3

SMARTFLEX™ CELLULAR ROUTERS

• Cellular router technologies: LTE and 3G• Ethernet, USB, I/O, Serial RS-232/422/485• Extended operational temperature range from -40 - 75 C• PoE PD, PoE PSE• 10-60VDC operation with transient and reverse polarity

voltage• WiFi access point• Certified for use with multiple North American & Canadian

carriers

WZZARD™ INTELLIGENT SENSOR NODES (WSD series) • Connect your existing sensors and make them

wireless (standard analog input, digital input/output, thermocouple)

• Integrated motion accelerometer and temperature sensors

• Ultra low power – 802.15.4e SmartMesh IP or Bluetooth 4.0 LE

• Communicates with Spectre Network Gateway via scalable and reliable wireless mesh networks

• Battery powered nodes• Read or configure nodes via Android, iOS tablets, smart phones using the Wzzard appplication

• Rugged, IP67, fiber reinforced polyester PBT enclosure• Wide operating temperature

WZZARD™ APPLICATION STARTER KITS (Energy Monitoring and more...)

• Includes: SmartSwarm gateway, Wzzard™ mesh nodes, application specific sensors, dashboard application

and accessories.

CERTIFICATIONS - SENSOR NODES & APPLICATION KITSUL/CSA, Class I/Division 2, Groups A,B,C,DEN55022 CISPR Class AIEC EN 61000-4-2 – ESD +/- 8kV air, +/- 4kV contactIEC EN 61000-4-3 – RFI IEC EN 61000-4-4 – EFTIEC EN 61000-4-5 – SurgeIEC EN 61000-4-6 – CIIEC EN 61000-6-2 – Generic immunity standards for heavy industrial environments IEC EN 61000-6-4 – Emission standards for heavy industrial environmentsIndustry Canada – RSS210FCC Part 15 Class A, Part 15.247CERoHS Directive (lead-free)IEC 60068-2-6:2007 – VibrationEN 60255-21-1 – VibrationIEC 60068-2-27:2008 – ShockEN 60255-21-2 – ShockWEEE

• Up to 14mi/22km (40mi/64km w/ optional antenna)• AES encryption security• Modbus compatible• Wide temperature• Dual power supply• IP30 case

Radio Modem Complete Kit

4

INDUSTRIAL WIRELESS I/O (ZZxD series)

• Low latency 15mS response rate• 128/256-bit AES encryption• Software selectable: RF transmit power & over-the-air

data rates• Modbus compatible; Wide temperature• Monitor and control analog/digital I/Os with C1/D2

snap-on modules

LONG RANGE RADIO MODEM & KIT (ZP9D-115RM-LR model)

IP67 INDUSTRIAL RADIO MODEMS & I/O (Xtreme™ ZXT series) • Instant plug-n-play set-up• 1-to-1 or 1-to-multipoint• AES encryption security• Modbus compatible• Wide temperature• IP67 rated case for outdoor applications

(Shown: 1 base I/O unit, with 3 expansion I/O

modules)

CERTIFICATIONS - RADIO MODEMS & I/O - ZXT SERIESUL, cULus, Class I/Division 2, Groups A,B,C,D (File # E245458)NEMA TS2 (Radio Modems)EN55022: 2006 Class A EmissionsIEC EN 61000-4-2 – ESDIEC EN 61000-4-3 – RFIIEC EN 61000-4-4 – EFTIEC EN 61000-4-6 – CIIEC EN 61000-6-1 – Immunity- residential, commercial, light industrial environmentsFCC Class A FCC ID (ZXT9-RM series Radio Modems – OUR-9XTEND) FCC ID (ZXT24-RM series Radio Modems – OUR-XBEEPRO)CERoHS Directive (lead-free)

CERTIFICATIONS - STANDARD I/O - ZZXD SERIESUL/cULus, Class I/Division 2 (File # E24545), UL508 (File# E222870)C1/D2 models: ZZ24D-Nx-SR (2.4 GHz, short range), ZZ9D-Nx-LR (900 MHz,long range)C1/D2 snap-on modules: ZZ-4AI, ZZ-8DI-DC, ZZ-8DO-R, ZZ-8DO-T1, ZZ-PROG1-USBIEC EN 61000-6-2 – Immunity standards - industrial environmentsFCC Part 15 Class ACERoHS Directive (lead-free)

CERTIFICATIONS - STANDARD RADIO MODEM & KITSUL, cULus, Class I/Division 2, Groups A, B, C, D (File# E245458)EN55022 CISPR Class B EmissionsIEC EN 61000-4-2 – ESDIEC EN 61000-4-3 – RFIIEC EN 61000-4-4 – EFTIEC EN 61000-4-5 – SurgeIEC EN 61000-4-6 – CSIEC EN 61000-4-8 – PFMIEC EN 61000-4-11 – Voltage Dips & InterruptionsIEC EN 61000-6-1 – Immunity- residential, commercial, light industrial environmentsFCC Part 15 Class BCERoHS Directive (lead-free)

POWER-OVER-ETHERNET (PoE/ PoE+) SWITCHES (EIRHP305-T, EIRP305-24V-T models)

• Simplifies powering of remote devices• Dual power inputs and alarm output • IP30 metal case, DIN or panel mount• Wide temperature• 24 or 48VDC power (EIRP305-24V-T)• 48VDC power (EIRHP305-T)

INDUSTRIAL PROTOCOL ETHERNET SWITCHES (eWorx SE400 Series)

• 8, 10, 16,18 port models• WebGUI Network Management• Ethernet/IP, PROFINET, Modbus/TCP • -40 - 75 C Operating Temp• Redundant 12 ~ 48VDC

INDUSTRIAL WIRED ROUTERS (SmartSwarm 341)

• Configurable user business logic data processing & display engine

• Comprehensive data outputs via MQTT, email, SMS and a variety of other services and database connections

• Integrates data from WZZARD, WISE, ADAM & third- party devices

• Integrates data from internet feeds• Acts as LAN to WAN bridge for third party device

connection• Cellular (EMEA/NATAM support) and wired models

available• -40 to +75 °C Operating temp

LIGHT MANAGED ETHERNET SWITCHES (eWorx SE300 Series)

• 5, 8, 10, 16, 18 port models• PoE/PoE+• iView2 Network Management• -40 - 75 C Operating temp• Redundant 12 ~ 48VDC

CERTIFICATIONS - ETHERNET SWITCHES - SE300 SERIESUL Class 1 Division 2 Groups A,B,C,D; ATEX Zone 2IECExUL508FCC Part 15 Subpart B Class A,EN 55011/55022, Class AEN 61000-4-2 (Level 3)EN 61000-4-3 (Level 3)EN 61000-4-4 (Level 3)EN 61000-4-5 (Level 3)EN 61000-4-6 (Level 3)EN 61000-4-8 (Level 3)IEC 60068-2-27IEC 60068-2-6

CERTIFICATIONS - WIRED ROUTERS - SMARTSWARM 341UL Class 1/Division 2 Groups A,B,C,D; ATEX Zone 2ETSI EN 301 511 v9.0.2ETSI EN 301 908–1 v5.2.1ETSI EN 301 908-2 v5.2.1ETSI EN 301 908-13 v5.2.1IEC 61000-6-2:2005ETSI EN 301 489-1 v1.9.2EN 55022:2010EN 60950-1:06 ed.2 (not Hazardous Locations)EN 62311:2008E8

5

CERTIFICATIONS - ETHERNET SWITCHES - SE400 SERIESUL Class 1/Division 2 Groups A,B,C,D; ATEX Zone 2IECExUL508/UL61010FCC Part 15 Subpart B Class A,EN 55011/55022, Class AEN 61000-4-2 (Level 3)EN 61000-4-3 (Level 3)EN 61000-4-4 (Level 3)EN 61000-4-5 (Level 3)EN 61000-4-6 (Level 3)EN 61000-4-8 (Level 3)IEC 60068-2-27IEC 60068-2-32IEC 60068-2-6

CERTIFICATIONS - POE SWITCHES - #EIRHP305-T, #EIRP305-24V-TUL/cULus, Class I/Division 2, Groups A,B,C,D (#Model EIRP-24V-T)UL/cUL, Class I Division 2, Groups A,B,C,D File# E173795 (#Model EIRHP-305-T)FCCCERoHS directive (lead-free) EN 61000-4-2 – ESDEN 61000-4-3 – RFIEN 61000-4-4 – EFTEN 61000-4-5 – SurgeEN 61000-4-6 – CIEN 61000-4-8 – PFMEN 61000-6-2 – Immunity standards - industrial environmentsEN 61000-6-4 – Emission standards - industrial environmentsIEEE 802.3 – 10Base-T EthernetIEEE 802.3u – 100Base-TX & 100Base-FX Fast EthernetIEEE 802.3x – Flow Control & Back PressureIEEE 802.3af – Power-over-EthernetIEC 60068-2-6 – VibrationIEC 60068-2-27 – ShockIEC 60068-2-32 – Free Fall

CERTIFICATIONS - MODBUS GATEWAYS - MESR900 SERIESUL Listed (File# E222870)UL Class1/Division 2 Groups A,B,C,D, HAZLOC (File# E245458)NEMA TS2 (Model# MESR901)FCCCERoHS Directive (lead-free)Auto-negotiation & Auto MDI/MDXIEEE 802.3, 803.u – (1) 10/100 Ethernet Port ((VESR92x models)

CERTIFICATIONS - SERIAL SERVERS - VESR900 SERIESUL Listed (File# E222870)UL Class1/Division 2 Groups A,B,C,D HAZLOC (File# E245458)NEMA TS2 (Model# VESR901)FCCCERoHS Directive (lead-free)Auto-negotiation & Auto MDI/MDXIEEE 802.3, 803.u – (1) 10/100 Ethernet Port ((VESR92x models)

ETHERNET PROTOCOL GATEWAYS (VFG series)• Protocol converter, data logger, web interface with

virtual HMI—all in one• Integrate multi-vendor systems, devices, protocols• Built-in driver list for PLC, PC, SCADA system mapping• Converts multiple protocols simultaneously (up to 9 protocols with expansion card)

ETHERNET SERIAL DEVICE SERVERS (VESR900 series)• Multi-serial-port (MEI), Ethernet port options• Automatically monitors, reconnects communications• Ethernet pass-through port option (VESR92x models)• Wide temperature

MODBUS ETHERNET GATEWAYS (MESR900 series)• Modbus TCP, RTU & ASCII• Serial/Ethernet, master/slave flexibility• Up to 16 Modbus TCP masters• Ethernet pass-through port option (MESR92x models)• Wide temperature

ETHERNET MEDIA CONVERTERS (EIR-M-ST, EIR-M-SC, EIR-S-SC models)• Convert copper signals to fiber• 10/100Base• Redundant 10-48VDC power inputs• Auto negotiation—data rate & duplex modes• MDI/MDI-X (auto cross-over)• Wide temperature; IP30 metal case

6

CERTIFICATIONS - PROTOCOL GATEWAYS - VFG1000/2000/3000 SERIEScULus Listed, Class I/Division 2, Groups A,B,C,D, UL Listed, UL508EMC EN 61326 – Immunity - control. lab, test & measurementIEC EN 61000-4-2 – ESDIEC EN 61000-4-3 – RFIIEC EN 61000-4-4 – EFTIEC EN 61000-4-5 – SurgeIEC EN 61000-4-6 – CSEN 55011 – RF - industrial, scientific, medical, arc weldingFCCCERoHS Directive (lead-free)IEC 61010-1 – Measurement/Control/Laboratory

CERTIFICATIONS - MEDIA CONVERTERS - #EIR-M-ST, #EIR-M-SC, #EIR-S-SCUL60950-1, Class I/Division 2, Groups A,B,C,D for Hazardous LocationsNEMA TS1/TS2EN60950-1IEC EN 61000-4-2 (-3, -4, -5, -6, -8, -11) IEC EN 61000-6-2 – Immunity standards - industrial environmentsIEC EN 61000-6-3 – Emission - residential, commercial, light industrial environmentsFCC Part 15, Class ACERoHS Directive (lead-free)IEC 60068-2-6 – VibrationIEC 60068-2-27 – ShockIEC 60068-2-32 – Free Fall

INDUSTRIAL USB HUBS (UHRx04 series)• USB 1.0/2.0 industrial-grade hubs• High retention USB connectors• Level 4 ESD protection - 15kV• Wide temperature• 4kV isolation (#UHR204)• IP30 metal case

7

HARDENED CONVERTERS & REPEATERS(485DRCi-PH, 232OPDRi-PH, 485OPDRi-PH, FOSTCDRi-PH-xx models)• 3-way isolation• Wide temperature• Modbus compatible• IP30 case• Power utility, substation, oil, gas, traffic & more

CLASS I/DIVISION 2 RATED ACCESSORIES

• Power supplies• Cabling• Terminal blocks• DIN rail

CERTIFICATIONS - SERIAL CONVERTERS & REPEATERS- #485DRCI-PH, #232OPDRI-PH, #485OPDRI-PH, #FOSTCDRI-PH-XXUL, Class I/Division 2, File: E245458NEMA TS1/2 (Models 485DRCI-PH, 232OPDRI-PH, 485OPDRI-PH, FOSTCDRI-PH-MT)IEC EN 61000-4-2 – ESDIEC EN 61000-4-3 – RFIIEC EN 61000-4-4 – EFTIEC EN 61000-4-5 – SurgeIEC EN 61000-4-6 – CSIEC EN 61000-4-12 – OscillatoryIEC EN 61000-4-16 – DisturbanceIEC EN 61000-4-17 – RippleFCCCERoHS Directive (lead-free)IEEE 1613 C37.90. (-1, -2, -3) – Electrical Power SubstationsIEC 61850-3 – Power Utility AutomationIEC 60068-2-1 – ColdIEC 60068-2-2 – Dry HeatIEC 60068-2-30 – Damp Heat/CyclicIEC 60068-2-6 – VibrationIEC 60068-2-27 – ShockIEC 60068-2-32 – Free Fall

CERTIFICATIONS - USB HUBS - #UHR204, #UHR304UL Listed, Class I/Division 2, Groups A,B,C,D (File: E245458)Ind. Cont. Eq. for HAZ LOC, 3HTV, Temp Code:T4AIEC EN 61000-4-2 – ESDIEC EN 61000-4-3 – RFIIEC EN 61000-4-4 – EFTIEC EN 61000-4-5 – SurgeIEC EN 61000-4-6 – CSIEC EN 61000-4-8 – PFMIEC EN 61000-6-2 – Immunity standards - industrial environmentsFCC Class BCERoHS Directive (lead-free) IEC 60068-2-6 – VibrationIEC 60068-2-27 – ShockIEC 60068-2-32 – Drop

Contact B+B SmartWorx. your distributor or channel partner for details.

Worldwide HeadquartersADVANTECHNo.1, Alley20, Lane26, Rueiguang RoadNeihu District, Taipei 11491Taiwan, R.O.CPhone: 0800-777-111www.advantech.com

European HeadquartersOranmore, Co. Galway, IrelandPhone: +353 91 792444Fax: +353 91 792445eSales@advantech-bb.com

Corporate Headquarters707 Dayton RoadOttawa, IL 61350 USAPhone: 1-815-433-5100Fax: 1-815-433-5109orders@advantech-bb.comwww.advantech-bb.com

Middle East, UAE, Africamdeast-afrsales@advantech-bb.comMobile: +971 50 943 65 62AG Silver Tower, JLT, P.O. Box 48777Dubai, UAE

Cellular Product GroupSokolská 71, 562 04 Ústí nad Orlicí Ill.Czech RepublicPhone: +420 465 521 020Fax: +420 464 647 299GSM: +420 603 872 287cellularsales@advantech-bb.com

Latin America, Caribbeanlatamsales@advantech-bb.comPhone: 1-727-797-0300Cell: 1-727-480-5920

OEM & Product ModificationPhone: 815-433-5222Fax: 815-433-5104Attn: Custom Dept.custom@advantech-bb.comCustom Quote Request Form:http://advantech-bb.com/custom

© B+B Smartworx, IncAll rights reserved.

1217advantech-bb.com

GLOBAL REACHFOR GLOBAL SUPPORTYou build your business and we will build your communication solution. Whether you need standard products or require special designs for specific applications – Advantech B+B SmartWorx can help.

+