The Jaipur Elephant Table

WARNING• This table is intended for decorative use only.• This table is NOT designed to hold excessive weight or to be used as a seating surface.• Improper use may result in damage to the table and/or bodily harm.• Do not use a candle taller than 3 inches in the lantern.• Trim wick to 1/4 inch prior to lighting. • Do not allow wick trimmings to accumulate in wax pool.• Burn candle within sight. Never leave a burning candle unattended or with children.• Keep away from flammable objects.

CARE AND MAINTENANCE• Do not use harsh chemicals when cleaning the surface of the unit. Doing so will damage the

finish. It is best to wipe clean with a damp cloth.• If you are located in a freeze/frost climate (32°F and below), store indoors for the

winter months.

For questions or comments about your product, please contact us at customerservice@ardencompanies.com or call our toll free customer service number

1-800-876-7336.We guarantee that every product we sell will stand up

to the supreme test — our customers’ satisfaction.

BO_4100_A3_EN_11.01.14

A B C D EElephant Base Tabletop Lantern Stake Lantern

1 1 1 1 1

F G H I JStake Anchor Stake Cap Flat Washer Large Allen Bolt Small Allen Bolt

1 1 2 4 2

LARGE PIECES

SMALL PIECES

KAllen Wrench

1

TOOLS

*Candle not included.

ASSEMBLY INSTRUCTIONS1. Secure the base (B) to the Elephant

(A) with two small Allen bolts (J) and the two flat washers (H) using the Allen wrench (K).

2. Position the tabletop (C) on top of the Elephant (A). Slide the stake anchor (F) through the tabletop (C) and into the Elephant (A).

3. Secure the stake anchor (F) to the tabletop (C) and the Elephant (A) with four large Allen bolts (I) using the Allen wrench (K).

A

H

J

B

H

JK

4. Slide the stake cap (G) onto the bottom of the lantern stake (D).

5. Insert the latern stake (D) into the stake anchor (F) through the tabletop (C) and Elephant (A).

6. Hang the lantern (E) from the lantern stake (D) as desired.

D

G

CF

A

A

A

C

F

II

II

K

ASSEMBLY NOTES• Please make sure that you have all the parts indicated before you begin assembly.• Items should be assembled on a soft surface to avoid scratching during assembly.• This product may need periodic tightening. We recommend tightening every 6 months.• Caution: Do not overtighten.

ATTENTIONRead all instructions before assembly and use of this product. Failure to follow these instructions and warnings could result in injury or damage to the item. Keep these instructions for future reference.

-