the impact of statcom on distance relay
TRANSCRIPT
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
1/15
THE IMPACT OF STATCOMTHE IMPACT OF STATCOM
ON DISTANCE RELAYON DISTANCE RELAY
Under The Esteemed Guidance Of
:Presented by
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
2/15
ISTANCEPROTECTIONIt is used for the protection of transmission or sub-transmission lines . It includes a no of distance relaysof same or different type.
Types of Distance Relays
Impedance relay /measures line impedance b w fault point.and relay location
Reactance Relay .measures reactnce of transmission line
MHO Relay measures component of admittance
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
3/15
hat isACTS ?
Benefits of FACTS
Increase the system securityProvide greater flexibilityIncrease the loading
capability &Reduce reactive power flowloop flow
FACT Devices
,Used for power flow control load sharing and.voltage regulation of system oscillations some
,of are
STATCOM ,SSG ,SSSC ,TCVR ,TCVL ,UPFC
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
4/15
STATCOM-T IS OPERATED AS A SHUNT
OMPENSATED STATIC VAR COMPENSATOR/HOSE CAPACITIVE INDUCTIVE OUTPUT
URRENT CAN BE CONTROLLED INDEPENDENT.F AC SYSTEM VOLTAGE
/It is based on a voltage current sourced.converter
It acts as active filter to absorb.system
Statcom has strong on fluence on load&flow control voltage control over.other devices
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
5/15
TATCOM MODELThis tool is used to model the 138kV parallel transmission system with 48-
pulse STATCOM installed in the mid-point of one transmission line.It is installed in the middle of the second transmission line.The positive & negative sequence line impedances are 0.195+j3.3425/km
The zero sequence transmission line impedance is 2.638+11.27j.
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
6/15
-48 pulse voltageinverter
- , -It consists of four 3 phase 3 level GTO
- .inverters and four phase shifting transformers
PPARENT IMPEDANCECALCULATIONThe relay is installed on the right side of Bus S.
When a single phase to ground fault occurs at the rightside of STATCOM and the distance is n*L from therelay point, the positive, negative and zero sequencenetworks of the system during the fault are
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
7/15
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
8/15
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
9/15
Mho characteristic with a positive sequence
voltage polarization is used as zone one distance% .relay to cover 80 of the transmission line
IMULATION RESULT
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
10/15
To study the coverage of the mho characteristic, faults atdifferent positions have been studied, and the apparentresistance and reactance for different fault locations are
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
11/15
phase to phase fault
TATCOM th i ht
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
12/15
TATCOM on the rightside
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
13/15
imulation resultsDuring a fault, the apparent impedance will increase if the STATCOMsupplies reactive power to the system, the apparent impedance willdecrease and vice-versa.Influence ratio will increase with an increasein location of the fault.
During a phase to phase fault, the apparent reactance increases butthe apparent resistance may decreaseThe position of distance relay has a big impact on the relayperformance.
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
14/15
CONCLUSIONThe simulation results show clearly the
impact of STATCOM on distance relay.performance
Work is underway in extending the studyfor other types of system and fault
conditions such as the effect of thelocation of STATCOM on distance relay
-
8/14/2019 THE IMPACT OF STATCOM ON DISTANCE RELAY
15/15
THANK Q