• THE GQ40C / GQ50C IS A FULLY AUTOMATIC REBAR CUTTING MACHINE. • THIS CUTTER USES A UNIQUE SHEAR CUTTING MECHANISM THAT HELPS IT CUT REBARS OF ALL SHAPES AND SIZES.

• THE BLADES USED IN THIS MACHINE CUT THROUGH THE REBAR WITH ONE STRIKE, THUS EXACT PRECISION OF CUTTING IS ACHIEVED WITH EVERY CUT.

• THE CUTTER CAN GIVE 36 CUTS PER MINUTE . EVEN IF 1/3rd OF THIS TARGET IS ACHIEVED, WE CAN GET 12 CUTS IN 1MINUTE, IMAGINE THE AMOUNT OF CUTTING WORK THAT CAN BE FINISHED IN A DAY !

1. ROUND STEEL, FLAT STEEL, SQUARE STEEL AND EVEN ANGLE STEEL BARS CAN BE BENDED WITH MINIMUM EFFORT.

2. IT CAN BE USED CONTINUOUSLY FOR HOURS TOGETHER UNLIKE ANY OF THE DISC CUTTERS.

3. STUPENDOUSLY FAST SPEED OF WORK IS ACHIEVED THUS REDUCING THE OVERHEAD COSTS IMMENSELY.

4. IT HAS A CLOSED LUBRICATING STRUCTURE, MAKING THE OPERATION AND MAINTENANCE EXTREMELY EASY & FEASABLE.

5. THE COST OF MAINTANCE AND OVERHEAD EXPENSES REDUCE CONSIDERABLY ONCE THE REBARS ARE CUT SWIFTLY.

6. THE SCRAP METAL LEFT OUT BY THIS MACHINE GIVES A BEFITTING RESALE VALUE.

ON THE TRADITIONAL DISC CUTTER MACHINES

OVER THE YEAR ..

THE DISC CUTTER COSTS YOU MORE THAN Rs. 81,000/-

ON THE OTHER HAND…..

THE BLADES OF OUR AUTOMATIC BAR CUTTING MACHINE LAS UPTO 22,000 CUTS ON AN AVERAGE ALONG WITH GIVNG YOU UNMATCHED SPEED !!

THUS, THE GQ40 & GQ50 ARE EFFICIENT, FAST AND MUCH MORE ECONOMICAL THAN ANY OTHER CUTTER.

Model GQ40C GQ50C

Diameter of (mm)

δ B≤ 450 mpa Ø 6~40 Ø 6~50

δ B≤ 510 mpa Ø 6~28 Ø 6~40

δ B≤ 570 mpa Ø 6~25 Ø 6~35

Times of Cutting per Minute 36 29

Stroke of Blade (mm) 34 44

Space of Blades (mm) 35~42 44~54

Power (KW) 3 4

Speed (r.p.m) 2880 2890

Voltage (V) 380, 3-phase 380, 3-phase

Overall Size (LxWxH) (mm) 1080x433x795 1240x550x1160

Weight (Kg) 560 820

All the specifications above is only for reference, which will be changed without notice

• THE GW40 / GW50 IS THE ULTIMATE BENDING MACHINE WHICH ALLOWS YOU TO BEND REBARS OF VARIOUS SHAPES AND SIZES.

• PIN POINT PRECISION IN THE DEGREE OF BENDING CAN BE ACHIEVED IN EVERY BEND, MOREOVER IT CONQUERS THE SHORT COMINGS OF THE BEND ANGLE ERROR.

• 3 TO 4 REBARS OF SMALL SIZES CAN BE BENT AT THE SAME TIME AT THE SAME DEGREE.

• BENDING CAN BE DONE FOR ANY ANGLE REQUIRED AND PERFECTLY SYNCHRONISED RINGS CAN BE MADE.

THE GW40/GW50 GIVES YOU THE UNIQUE OPTION OF BENDING BARS IN 3 AMAZING WAYS:

1.MANUAL: This method allows you to control the angle of bending by the push of a button, thus you can bend each bar at a different angle every time.

2.SEMI-AUTOMATIC: Using this option allows you to set the angle of bending before hand. Once the angle is achieved, the machine automatically cuts off and returns to original position. The bar can simply be taken out and another bar can be set in. The machine starts to bend the next bar only when the button is pushed.

3.FULLY-AUTOMATIC: Bending by this option cuts your work out even more. Once the bar is automatically bended and the machine has returned to its original position, the machine waits for a specified amount of time for you to remove the bent bar and set in a new bar, and then automatically starts again. The time for this pausing can be adjusted as per requirement. So all you have to do is set the bar in and out !

SAY BYE BYE !!

• TO LABOUR TROUBLES.

• TO BENDING ANGLE ERRORS.

• IRREGULAR BENDING.

NOW GET YOUR BARS BENDED IN RECORD TIMINGS AND IMPROVE WORK EFFICIENCY LIKE NEVER BEFORE!!

Model GW40Z GW50Z

Diameter of (mm)

δ B≤ 450 mpa Ø 6~40 Ø 6~50

δ B≤ 510 mpa Ø 6~32 Ø 6~40

δ B≤ 570 mpa Ø 6~28 Ø 6~35

Speed of Turning Plate (r.p.m)3.7

67.2

14

Power (KW) 3 4

Speed (r.p.m) 1430 1440

Voltage (V) 380, 3-phase 380, 3-phase

Overall Size (LxWxH) (mm) 774x898x728 900x670x815

Weight (Kg) 448 600

All the specifications above is only for reference, which will be changed without notice