the ghost s1 - louqelouqe.com/img/ghosts1finalupdates.pdf · the ghost s1 # 21 fewer screw length...

Final update suggestion document

THE GHOST S1

THE GHOST S1

Suggested updatesAll the updates in this document add features or value in other ways to the Ghost S1 design, some affect cost negatively others decrees cost. The sum of all updates result in a small increase in manufacturing cost but this will not affect the price point of the product.

Below are the updates presented in table format, the rest of the document provides illustrations and descriptions of the updates.


# Name Cost impact Status Area

1 3:rd PSU position Small increase Added to model Blade

2 Blade SSD Small increase Added to model Blade

3 Riser position None Added to model Blade

4 Added zip ties Small increase Added to model Blade

5 Bottom plate clean up Small decrease Added to model Bottom plate

6 C14 Small increase Added to model C14 power connector

7 New SSD tray Small increase Added to model Disk tray

8 FTW3 adjustment Small increase Added to model Gable [BACK]

9 Kensington Small increase Added to model Gable [BACK]

10 Rear symmetry Small decrease Added to model Gable [BACK]

11 GPU max height increase None Added to model Gable [BACK]

12 Gable spline Small increase Added to model Gable [BOTH]

13 OI symmetry Small decrease Added to model Gable [FRONT]

14 GPU cover Small decrease Added to model GPU bracket

15 Rag tag opening None Added to model Grill

16 Grill hole pattern Small increase Added to model Grill

17 Grill screw down Small increase Added to model Grill

18 Grill material Increase Added to model Grill

19 PSU bracket compatibility None Added to model PSU bracket

20 Cable management None Added to model PSU bracket

21 Screw harmonization Small decrease Added to model Screws

22 Side filter frame Small decrease Added to model Side panel

23 Side filter pickup Small increase Added to model Side panel

24 Slide interface None Added to model Side panel

25 Side spline Small increase Added to model Side panel

26 Top plate adjustments Small increase Added to model Top plate

27 TopHat countersinks Small increase Added to model TopHats

28 TopHat heights Small increase Added to model TopHats

THE GHOST S1

# 1

Add a third mounting option for PSU bracket, 15mm higher than the top position

Short description

Small increase

Production cost impact

Affected component

Blade

Status

Added to model, awaiting community feedback

# 2

Add SSD mounting holes behind the PSU

Short description

Small increase


Affected component

Blade

Status


# 3

Lower PCI riser stand-offs position 2.54 mm

Short description

NONE


Affected component

Blade

Status


# 4

Zip tie holes for water pipes in bottom position

Short description

Small increase


Affected component

Blade

Status



Name

3:rd PSU position

Name

Blade SSD

Name

Riser position

Name

Added zip ties

THE GHOST S1

# 5

Remove redundant SSD-bracket holes

Short description

Small decrease


Affected component

Bottom plate

Status


# 6

C14 screw-in PWR contact instead of snap on

Short description

Small increase


Affected component

C14 power connector

Status


# 7

Redesign to fit 120 mm mounting slots, creating flexibility to mount in TopHats

Short description

Small increase


Affected component

Disk tray

Status


# 8

Milling on inside of top back corner needs to be increased ~1,5 mm for specific GPU to fit (FTW3)

Short description

Small increase


Affected component

Gable [BACK]

Status



Name

Bottom plate clean up

Name

C14

Name

New SSD tray

Name

FTW3 adjustment

THE GHOST S1

# 9

Kensington lock hole added below label

Short description

Small increase


Affected component

Gable [BACK]

Status


#10

Adjust sticker to harmonize with other changes for visual symmetry

Short description

Small decrease


Affected component

Gable [BACK]

Status


#11

Lowered GPU position by 2.54mm, increasing max GPU height to 145.5mm

Short description

NONE


Affected component

Gable [BACK]

Status


#12

Increase side curvature to create a more solid impression (avoiding visual collapse) ~0.25 mm (spline)

Short description

Small increase


Affected component

Gable [BOTH]

Status



Name

Kensington

Name

Rear symmetry

Name

GPU max height increase

Name

Gable spline

THE GHOST S1

#13

Centered screw columns for Button circuit board

Short description

Small decrease


Affected component

Gable [FRONT]

Status


#14

Slide down GPU covering plate on the inside

Short description

Small decrease


Affected component

GPU bracket

Status


#15

Increase flag hole to 3.0mm in width for leather / woven ribbon fit

Short description

NONE


Affected component

Grill

Status


#16

Hole pattern further to the sides, add one row and column + re-center

Short description

Small increase


Affected component

Grill

Status



Name

OI symmetry

Name

GPU cover

Name

Rag tag opening

Name

Grill hole pattern

THE GHOST S1

#17

Updated hole pattern allowing screws to reach the threaded holes in the gables and side sheets

Short description

Small increase


Affected component

Grill

Status


#18

Stronger steel (spring steel)

Short description

Increase


Affected component

Grill

Status


#19

Increase top opening size by 0.5 mm for better fit with PSUs that don’t follow standard (Silverstone)

Short description

NONE


Affected component

PSU bracket

Status


#20

Remove material on blade side of the PSU bracket to create opening for cable routing, no routing prior to mounting will be needed this way

Short description

NONE


Affected component

PSU bracket

Status



Name

Grill screw down

Name

Grill material

Name

PSU bracket compatibility

Name

Cable management

THE GHOST S1

#21

Fewer screw length variations and all M3 black torx T10

Short description

Small decrease


Affected component

Screws

Status


#22

Increase filter frame around ventilated area to 12 mm to be compatible with DEMCi, remove one column of holes and re-center

Short description

Small decrease


Affected component

Side panel

Status


#23

Grip slot for easier dust filter pickup added

Short description

Small increase


Affected component

Side panel

Status


#24

Updated sliding interface between side sheet and gables

Short description

NONE


Affected component

Side panel

Status



Name

Screw harmonization

Name

Side filter frame

Name

Side filter pickup

Name

Slide interface

THE GHOST S1

#25

Increase side curvature to create a more solid impression (avoiding visual collapse) ~0.25 mm (spline)

Short description

Small increase


Affected component

Side panel

Status


#26

redesigned to match TopHat countersink

Short description

Small increase


Affected component

Top plate

Status


#27

Countersinks for the platform to fall down deeper into the gables and not affect the TopHat alignment, all positions now have equal gap size

Short description

Small increase


Affected component

TopHats

Status


#28

All sizes 1 mm taller

Short description

Small increase


Affected component

TopHats

Status



Name

Side spline

Name

Top plate adjustments

Name

TopHat countersinks

Name

TopHat heights

the ghost s1 - louqelouqe.com/img/ghosts1finalupdates.pdf · the ghost s1 # 21 fewer screw length...

Documents