the electronics kit tee2o1 mr. payne’s period 5 room s111
TRANSCRIPT
The Electronics Kit
TEE2O1
Mr. Payne’s Period 5
Room S111
Contents of the Kit
This is the Kit !
Each group will be responsible for maintaining the contents of 1 kit.
The Electronics Kit
Identify the Parts in Each Bag
You should be able to identify the contents of each bag. Make sure each bag is kept separate from other bags.
Note the unbagged:Parallel Port Wire 1mWire strippers/cutters 1Pliers 1
Wire - 5 colours hookup wire 25'
Bag One
Resistors, LEDs, Transistors and Capacitors
110 ohm resistors 2220 ohm resistors 161K ohm resistors 42K ohm resistors 1
LEDs (red) 16LEDs (green) 2LEDs (yellow) 2
1N4001 (transistor) 6
2.2uF capacitor 1
Bag Two
Motors and 25 pin parallel port connector kit.
PN2222A 4PN2907 41V-12V DC motor 1stepper motor 1
DB25 Plastic Hood 1DB25 D-sub connector - crimping style 1
Bag Three
More Resistors
10K ohm resistor 851K ohm resistor 1100K ohm resistor 1510K ohm resistor 11.5M ohm resistor 1
Bag Four
Wire for 25 pin connector
Male crimp pins 16
Wire - 5 colours hookup wire 25 inches
Parallel Port Wire 1m
Bag Five
Buttons and Integrated Circuits
74LS194 - 4-bit Bi-directional shift register 1
74LS154 - 4 to 16 de-Multiplexer 1
Push button 8
Bag Six
8 Segment Display and Integrated Circuits
74LS245 - Transciever 174LS259 - 8 bit addressable latch 2555 - Timer 1
Bag Six
More Integrated Circuits
74LS00 - NAND 174LS02 - NOR 174LS04 - Inverter 174LS08 - AND 174LS32 - OR 174LS47 - 7- Segment decoder/driver 174LS74 - Dual D flip-flop 1 74LS86 - XOR 1
The Big Cahuna The Power Board and Switches
and Input / Output Lights
The electronic experimenter box is where you provide power and ground to your circuits.
How It Works
See the upcoming Powerpoints on Labs 4.2.1 and 4.2.2
How It Works
Next Steps
Be sure that you know where all parts belong before you use them to make circuits.
Remember to replenish your kit for the next class!
A full parts list for the kit is available at http://www.classictechnology.ca/