the compact power pack with high performance cyclone ...€¦ · the compact power pack with high...
TRANSCRIPT
The compact power pack with high performance cyclone technologyIQORON-V 4.5 air cleaner
An intelligent solutionThe IQORON-V 4.5, the smallest air cleaner of the IQORON V series, is designed for fl ow rates up to 4.5 m³/min. It is characterised by high performance, a small installation space and easy maintenance. The two-stage air cleaners of the IQORON-V series are suitable for machines operating under heavy dust conditions and cover nominal fl ow rates from 2 to 14 m³/min. MANN+HUMMEL meets the current and future requirements for greater air throughput with reduced installation space and is therefore the ideal solution for compact applications.
The outstanding features of the IQORON-V 4.5:
• the straight air flow makes the air cleaner particularly suitable for tight installation conditions
• the CompacPleat filter element and highly efficient pre-separation with multi-cyclone block result in longer service life
• a pre-separation effi ciency with dust discharge valve higher than 90%, and with scavenging up to 96%
• the compact oval design requires less space• highest operational reliability achieved through filter
element with axial seal and additional secondary element with radial seal
• easy monitoring of the dust load through integrated connection for service switch
• easy access to clean multi-cyclone block through central screw
• environmental-friendly disposal through metal-free filter elements (fully incinerable)
• quick first fitting through mounting points integrated on housing with variable installation positions for easy adjustment to many installation space requirements
• maintenance friendly through self-holding end caps with distinctive colouring
Pho
to: i
stoc
kpho
to.c
om /
© t
verk
hovi
nets
Replacement parts
IQORON-V 4.5Dimensions and part numbers
SizeNominal flow rate [m³/min]
PicturePart no. Replacement filter element
Weight [kg]without
secondary elementwith
secondary elementMANN-FILTERmain element
MANN-FILTER secondary element
IQORON-V 4.5
4.51 45 180 95 911 45 180 95 910
C 22 041 CF 1941 2.832 45 180 95 913 45 180 95 912
Size PicturePart no. Replacement filter element
Cyclone blockDust discharge
valveMANN-FILTERmain element
MANN-FILTER secondary element
IQORON-V 4.51 45 180 12 988
39 000 40 731 C 22 041 CF 19412 45 180 12 999
22
40.2 ±0.5Ø118.9141.1
72.5143.1
75 ±192 ±1
172
±124
4±1
204
±3
273.1
95 ±0.7
222
50
254.8 31.7
80±1
Ø82
±1Ø
77
155 ±1
393.3 ±5
2
22
40.2 ±0.5Ø118.9141.1
72.5143.1
75 ±192 ±1
172
±124
4±1
204
±3
273.1
95 ±0.7
222
50
254.8 31.7
80±1
Ø82
±1Ø
77
155 ±1
393.3 ±5
2
22
141.1118.9
40.2 ±0.5Ø
72.5143.1
Picture 1
Picture 2
Filter housingThe housing is made from robust plastic reinforced with fibre-glass. The advantages of this material are its mechanical load capacity and wide range of operating temperatures. As a result, IQORON-V 4.5 can be used in continuous operation in tempera-tures up to +100°C and for short periods of time up to +120°C.
The connection of a service switch or indicator is possible directly on the housing. The mounting possibilities are integrated in the housing as standard. On request different threaded inserts are available for M8 screws.
Secondary element
Main element
Through-hole
M8 threaded inserts (option for M10 or UNC 3/8“-16)
Cyclone block
Dust discharge valve
IQORON-V 4.5 Component parts
Volume flow V̇ [m3/min]
0 1 2 3 4 5 6 7
Dust capacity [g]
Specifications• Operating temperatures for continuous operation:
-40°C to +100°C / +120°C for a short time• Tightening torque for mounting screws:
Threaded inserts: 15 ±3 Nm Through-hole: 23 Nm
• Tightening toque for hose clamp (on the clean side): max. 5 +0.5 Nm
• Housing material: PA6 GF30
Filter housing
0
10
20
30
40
50
0 500 1.000 1.500 2.000 2.500 3.000 3.5000
10
20
30
40
50
60
70
80
Flow characteristics for dust capacity as per ISO 5011
Flow characteristics for flow rates as per ISO 5011
with secondary element
without secondary element
with secondary element
without secondary element
Flo
w r
esis
tan
ce [
mb
ar]
Flo
w r
esis
tan
ce [
mb
ar]
Flow characteristics
W9
941
22 1
01 e
n 02
15
Prin
ted
in G
erm
any
© M
AN
N+
HU
MM
EL
Gm
bH
MANN+HUMMEL GMBH
67346 Speyer · Germany
Tel.: +49 (62 32) 53-80
Fax: +49 (62 32) 53-88 99
www.mann-hummel.com
Catalogues: www.mann-hummel.com/en/corp/services/catalogues
MANN+HUMMEL Group
quality fi ltration products for vehicles, engines and industrial applications. The OEM business with global market leaders and producers of vehicles, machines and installations defines the quality and performance of the products. Filters for the international aftermarket are sold under numerous international brands as well as under the group‘s own MANN-FILTER brand.
The MANN+HUMMEL Group is a company with international opera-tions and employs around 15,200 people worldwide at 60 international locations.
The company develops, produces andsells technically complex componentsand systems for the automotive industryand many other fi elds. A key area is high
MANN+HUMMEL Industrial FiltrationThe Industrial Filtration Business Unit with its headquarters in Speyer (Germany) is specialised in meeting the requirements of off-highway vehicle and engine applications, compressed air and vacuum technology, mechanical engineering and plant construction.
For these and other industrial fi elds MANN+HUMMEL Industrial Filtration offers high performance products forthe fi ltration and separation of air, gasesand liquids.
Thanks to an effi cient and well-organised partner network and global sales net-work the products are readily available at almost all locations.