the code breakers detailed design presentation
DESCRIPTION
The code Breakers Detailed Design Presentation. The Bicycle Powered Irrigation Device Team Members: Ali Ashraf Ahmed Samir Mushfiq. Outline. Introduction Product modification Subsystem Conclusion. Introduction. Revised client statement - PowerPoint PPT PresentationTRANSCRIPT
The code Breakers Detailed Design
PresentationThe Bicycle Powered Irrigation Device
Team Members:Ali Ashraf Ahmed SamirMushfiq
Introduction
Product modification
Subsystem
Conclusion
Outline
Revised client statement◦ The client required a bicycle powered irrigation device
which is easy to use, durable, cheap, safe as well as easy to maintain. It should also be able to lift the water 2 meter high at a rate of minimum 2 gallons per minute and the bike should also easily return to its normal use.
A preliminary report was submitted with 3 design evaluated and the best one chosen.
This design was studied in more detail and is explained in this presentation
Introduction
Product modification
Product Modification
Water lifting
Transition
Water collection
Bike support
Motor support
Subsystems
Bike support
Component Quantity MaterialRods 8 Metal
Rods 2 Steel
Table 1: Bill of materials for the transition subsystem:
0.33m
Transition system
Transition subsystem
0.23m
0.138m0.30m
0.18m
40°
Secondary Wheel
Steel rod
Component Quantity Material
Wheel 1 Rubber
Rods 8 Metal
Cylindrical rods 1 Steel
Table 2: Bill of materials for the transition subsystem:
Water lifting subsystem
Axial of the impeller
Water inlet
Shaft connecting impeller to power source
Discharge pipe
Component Quantity Material
Centrifugal pump 1 Metal
Water inlet hose 1 Rubber
Water outlet hose 1 Rubber
Table 3: Bill of materials for the lifting subsystem:
0.5m
Transition system
Water collection subsystem
Component Quantity Material
Container 1 Plastic
Square rods 4 Wood
Base sheet 1 Wood
Table 4: Bill of materials for the collection subsystem:
Water collection subsystem
Container Square rodBase sheet
Motor support subsystem
Component Quantity Material
Rectangular Block 1 Wood
0.40m
0.25m
Shaft
0.138m
Table 5: Bill of materials for the motor support subsystem:
Any Questions
Conclusion