the cfm engine saga - aircraft builders council€¦ · cfm, cfm56, leap and the cfm ... the cfm...
TRANSCRIPT
CFM, CFM56, LEAP and the CFM logo are trademarks of CFM International, a 50/50 joint company between Snecma (Safran group) and GE. The information in this document is CFM Proprietary Information and is disclosed in confidence. It is the property of CFM International and its parent companies, and shall not be used, disclosed to others or reproduced without the express written consent of CFM. If consent is given for reproduction in whole or in part, this notice shall appear in any such reproduction in whole or in part. The information contained in this document may also be controlled by the U.S. and French export control laws. Unauthorized export or re-export is prohibited.
Jean-Paul Ebanga, CFM President
The CFM Engine Saga
Aircraft Builder Council Conference, San DiegoSeptember 23, 2013
4 / CFM Proprietary Information subject to restrictions on the cover
Most successful aviation venture
• 25000+ engines shipped
CFM is a JV …
World’s largest aircraft engine company
• 70% share/100+ PAX
Most successful aviation partnershipGE – Safran Agreement
• 18K to 50K lbs. thrust• Together since 1974 • Committed until 2040
5 / CFM Proprietary Information subject to restrictions on the cover
with a perfect solution line-up …
6 / CFM Proprietary Information subject to restrictions on the cover
… using a very lean organization
CFM56 and LEAP, a same worksharinga simple 50/50 structure
* All activities shared 50/50: R&D, engineering, sales and marketing, product support, manufacturing and services
7 / CFM Proprietary Information subject to restrictions on the cover
Durham, NCAssembly and engine testing
Wilmington, NCShafts and disks
Greenville, SCTurbine blades
Auburn, ALEngine components
Ellisville, MS Composite engine parts, thrust reversers
Evendale, OH HQ, design, assembly and engine testing
Regensburg, Germany TiAl material
Dayton, OH Ducts and tubes
Rutland, VT AirfoilsPeebles, OH Testing capability
Victorville, CAFlight testing
Hooksett, NHStator vanes and tubes
Lynn, MA Combustor liners
Snecma, Querétaro (Mexico) Engine modules manufacturing
and assembly
Snecma, Gennevilliers (France) Forging, casting and machining of mechanical partsSnecma, Evry-Corbeil Machining and assembly of engine partsSnecma, Villaroche Design, assembly and testing of enginesSnecma, Le Creusot Machining of low-pressure turbine disksHispano-Suiza, Colombes Accessory gearboxSagem, Massy FADECAircelle, Le Havre Nacelles
… with the most comprehensive supply chain
Famat, Saint-Nazaire (France) Frames
Techspace Aero, Liers (Belgium)Low-pressure compressor production
Snecma HAL (India) Control and accessory production
JV 50/50
Snecma Suzhou (China) Engine module manufacturing and assembly
8 / CFM Proprietary Information subject to restrictions on the cover
and the best global support coverage …
Training centers
3 customer support centers
6 on-wing support centers
ATI (GE) Component Retail Shop
CFM Overhaul Shop
CFM Component Retail Shop
New material sources
Used material sources 1,500 CFM/GE/Snecma support resources in 142 locations
9 / CFM Proprietary Information subject to restrictions on the cover
… for a market success
25,350 engines delivered
35,650 engines sold
10,300 engines in backlog
13 / CFM Proprietary Information subject to restrictions on the cover
650+ millionflight hours
3 million +passengers daily
2.5sdeparture interval
CFM built the world standard in reliability
99.98%reliability
14 / CFM Proprietary Information subject to restrictions on the cover
f=(Proven Breakthrough x Proven Readiness)
24 / CFM Proprietary Information subject to restrictions on the cover
From raising standards and knowledge …
26 / CFM Proprietary Information subject to restrictions on the cover
Best maintenancecost and maintainability
Right productat the right time
Exceedingenvironmental regulations
Continuousfuel efficiency improvement
Highest residual value