the affect of adding hot water to cold water on the temperature by: sarah fothergill brodey wambold
TRANSCRIPT
![Page 1: The affect of adding hot water to cold water on the temperature By: Sarah Fothergill Brodey Wambold](https://reader035.vdocuments.site/reader035/viewer/2022062519/5697bfd31a28abf838cac7d8/html5/thumbnails/1.jpg)
The affect of adding hot water to cold water on the
temperature
By:
Sarah Fothergill
Brodey Wambold
![Page 2: The affect of adding hot water to cold water on the temperature By: Sarah Fothergill Brodey Wambold](https://reader035.vdocuments.site/reader035/viewer/2022062519/5697bfd31a28abf838cac7d8/html5/thumbnails/2.jpg)
Purpose and Hypothesis
• Purpose- To see if adding different temperatures of hot water affects the temperature of really cold water, when mixed together.
• Hypothesis- The temperature will increase slowly as the amount of hot water increases.
![Page 3: The affect of adding hot water to cold water on the temperature By: Sarah Fothergill Brodey Wambold](https://reader035.vdocuments.site/reader035/viewer/2022062519/5697bfd31a28abf838cac7d8/html5/thumbnails/3.jpg)
Independent Variable, Levels and Dependent Variable
• Independent Variable- Time (Minutes)
• Levels-
• Dependent Variable- Temperature (Degrees Celsius)
0
Control
2 4 6
2
Trials
2 2 2
![Page 4: The affect of adding hot water to cold water on the temperature By: Sarah Fothergill Brodey Wambold](https://reader035.vdocuments.site/reader035/viewer/2022062519/5697bfd31a28abf838cac7d8/html5/thumbnails/4.jpg)
Constants
• The amount of water started with.
• The amount of water added.
• Both of the beakers.
• The type of water.
• The burner and burner stand.
• The lab equipment.
![Page 5: The affect of adding hot water to cold water on the temperature By: Sarah Fothergill Brodey Wambold](https://reader035.vdocuments.site/reader035/viewer/2022062519/5697bfd31a28abf838cac7d8/html5/thumbnails/5.jpg)
Procedure Get lab equipment out as followed.
Thermometer Graduated CylinderTemperature Sensor Computer Alcohol Burner Alcohol Burner stand
2 Beakers
1. Set up the lab. 2. Measure 50 mL. of cold water. 3. Measure 50 mL. of tepid water.4. Put beaker 2 on the burner stand. 5. Pour the water into beaker 1 and pour the tepid water into beaker 2. 6. Light the alcohol burner. 7. Every 2 minutes add 10 mL. of the hot water. 8. Record your data onto a table. 9. After completing 2 trials clean up the lab.
![Page 6: The affect of adding hot water to cold water on the temperature By: Sarah Fothergill Brodey Wambold](https://reader035.vdocuments.site/reader035/viewer/2022062519/5697bfd31a28abf838cac7d8/html5/thumbnails/6.jpg)
ResultsTime (min.) Trial 1
temperature of water added (Degrees Celsius)
Trial 1 temperature of water
(Degrees Celsius)
Trial 2 temperature of water added (Degrees Celsius)
Trial 2 temperature of water added (Degrees Celsius)
The Starting temperature of the water
(Degrees Celsius)
0 None added 7.1 None added 4.6 27.4
2 29.1 28.2 50.2 28.3 41.9
4 81.4 43.4 86.2 44.3 27.8
6 50.2 28.3 101 52.3 43.7
![Page 7: The affect of adding hot water to cold water on the temperature By: Sarah Fothergill Brodey Wambold](https://reader035.vdocuments.site/reader035/viewer/2022062519/5697bfd31a28abf838cac7d8/html5/thumbnails/7.jpg)
Conclusion
• The temperature was at highest 101 degrees Celsius for both trials.
• The temperature was at lowest 29.1 degrees Celsius for both trials.
• The temperature of the water after the hot water was added was at highest 52.3 degrees Celsius and at lowest 4.6 degrees Celsius.
![Page 8: The affect of adding hot water to cold water on the temperature By: Sarah Fothergill Brodey Wambold](https://reader035.vdocuments.site/reader035/viewer/2022062519/5697bfd31a28abf838cac7d8/html5/thumbnails/8.jpg)
Conclusion
• The hypothesis was correct because as hot water was added the temperature did increase as we had said.
• This happened because hot water has more thermal energy than the tepid water.
![Page 9: The affect of adding hot water to cold water on the temperature By: Sarah Fothergill Brodey Wambold](https://reader035.vdocuments.site/reader035/viewer/2022062519/5697bfd31a28abf838cac7d8/html5/thumbnails/9.jpg)
Conclusion
• As thermal energy was being transferred to the cold water the particles of the hot water that was added slowed down.
• The particles of the cold water sped up.
• This is a process called thermal equilibrium.