the book · 4 1994 offered the first lifetime warranty for architectural speakers. 1994 introduced...

70
THE BOOK 2016

Upload: others

Post on 15-Jul-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

THE BOOK2016

Page 2: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

2

Each day we wake up and see every new day as an incredible opportunity for us to reshape, reform, and

rethink the way we do things. We ask ourselves: What can we do differently? What can we do better?

How can we be the best? Then we do it. When we brought the original inventors of the in-wall speaker

back together to launch Origin Acoustics, we were presented with an amazing opportunity for us to

draw upon our rich experiences to reinvent the architectural speaker. Our team reflects inward with a

dedicated philosophy marked by evaluation, constant change and improvement. Reinvention—this

is our lifeblood.

Music and sound embellish our lives with vigor. They stir the creative mind, energize the soul, and

move the heart. Our mission at Origin Acoustics is to honor music and the artists of sound by producing

flawless stages for in-home performances. Since inventing the original in-wall speaker four decades

ago, we’ve continued to innovate 1000’s of award winning products. The next two pages of this book

showcase all of our achievements in the industry. Our goal has and always will be to create the best

sounding loudspeakers you can own. We will not stop until this is achieved. Reinvention is what we

live for.

You’ve been deliberately chosen as our partner in your market to help us cultivate an exuberant

community in this industry. We’re forever thankful for your loyal support and demand for what we do,

and don’t take this for granted. We look forward to being more than just a manufacturer to you, but

most importantly a partner and friend in business whom you can share quality and meaningful life

experiences with. We’re in your corner, constantly looking at new ways to serve you best and help your

business flourish. This is our commitment to you.

Seek Reinvention

― Jeremy Burkhardt, CEO

Page 3: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

3

5 Levels of Performance 7

More Bass, Less Space 7

Installation is a Zip 9

In-Ceiling Speakers 10

Director Collection 10

New Inventions & Patents 12

Director Dual Tweeter Collection 18

Minimal Opening System 20

Producer Collection 22

Producer Dual Tweeter 24

Thinfit Collection 26

In-Wall Speakers 28

THTR Collection 28

LCR 60 Collection 30

LCR 30 Collection 32

C60 Collection 34

Subwoofers 36

Composer Subwoofers 36

Director Subwoofers 38

Bassic Subwoofers 40

Outdoor Speakers 42

Design Services 42

Seasons Landscape Collection 44

Seasons Landscape Collection Systems 47

Seasons Landscape Mounts 48

Seasons Landscape Amplifiers 49

Acoustascape 50

Seasons Outdoor Collection 52

Electronics 56

Amplifiers 56

Volume Controls 60

Installation Accessories 61

Sound Enclosures 62

New Construction Brackets 63

Paint Shields 64

Cover Plates & Grilles 65

The Origin Family 66

Innovations 68

Contents

Page 4: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

4

1994 Offered the first lifetime warranty for architectural speakers.

1994 Introduced SpeakerCraft as its own brand.

1993 Designed first dual voice coil woofers designed into in-ceiling

and in-wall speakers that were not subwoofers.

1991 Designed the world’s first in-wall and in-ceiling speakers

to use a pivoting tweeter to direct the sound towards the

listener.

1988 Designed the world’s first vibration canceling in-ceiling

mounted subwoofer system.

1986 Designed the world’s first in-wall subwoofer system.

1985 Designed and patented first in-wall and new construction

installation bracket.

1984 Molded the first plastic baffle for in-wall installation.

1982 Introduced the first in-wall speakers.

1979 Designed and introduced the first speaker with adjustable

tweeter volume control.

1978 Introduced the first flush mount high fidelity in-ceiling speak-

ers.

Milestones1976 Ken Humphreys & Ed Hasse developed and manufactured

the first architectural loudspeaker.

Page 5: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

5

Milestones

2015 Shipping over 140 innovations.

2014 Patent pending for Director Collection loudspeakers.

2013 Patent pending for ZipClip® and SpringLock® tool-less

mounting systems.

2012 Jeremy Burkhardt, Ed Hasse and Ken Humphreys began the

process of reinventing the architectural loudspeaker.

2010 Patented axially stabilized DPSD® tweeter.

2007 Patented AIM® speaker inducted into the CEDIA hall of fame.

2006 Patented the first aimable loudspeaker for in-wall installa-

tion.

2005 Invented the first system to control the iPod® and distribute

both music and metadata throughout the home.

1997 Patented the first “aimable” loudspeaker for in-ceiling instal-

lation.

1996 Patented the I-Beam mounting system.

1995 Introduced the first UL fire-rated enclosure.

1994 Introduced the first snap-on combined metal and plastic

installation bracket.

Page 6: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

6

Introducing AcoustaScape by Origin Acoustics... Creatively destructing the landscape market, AcoustaScape

delivers heightened sonic performance outdoors with scalability. Outperforming the competitors on every

level, the AS41 Hi-Fi Landscape Audio System comes complete with 4.25” two-way camouflage plantable

speakers with a separate tweeter and a powerful 8” in-ground subwoofer for a stunning full-range listening

experience outdoors. With the option to add on up to eight satellites, the system provides perfectly even

sound coverage in areas up to 2,500 sqft. Go to page 50 for more information.

Page 7: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

7*Patent Pending

Articulate

Precise

Refined

Balanced

8

6

4

2

5 Levels of Performance

Kevlar™ Woofers Pivoting Silk DPSD™ Tweeters

Glass Fiber Woofers

Pivoting Silk DPSD™ Tweeters

Injected Molded Graphite Woofers

Pivoting Aluminum Tweeters

Injected Molded Graphite Woofers

Pivoting Aluminum Tweeters

Origin Acoustics is the most expansive line of architectural speakers

in the world, with designs for almost any and every application.

With five levels of performance, we offer everything from speakers

for a couple hundred dollars a pair, to speakers that have been

reviewed as the finest and best sounding for a few thousand a pair.

We will continue to create the most musically accurate speakers to

impress even the most discerning audiophiles.

Our Director Collection of 3, 6, 8, and 10” in-ceiling speakers come in

round and square grille finishes with five distinct sound signatures.

Our Composer Collection of 10, 12, 15, and 30” in-wall speakers

complete the experience, offering the best immersive audio

experience with the same sonic signature of the Director Collection.

Whether all in-ceiling, all in-wall, or mixed, each model has been

timbre matched with hand-selected materials to perform with an

amazing sonic signature that has been continuously refined by our

engineers for over 40+ years.

Fundamental0Poly/Rubber

WoofersPivoting

Silk Dome Tweeters

Page 8: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

8

More Bass, Less SpaceCreating deep dynamic bass requires moving lots

of air. This means bigger drivers and typically big-

ger enclosures. The Origin team has developed a

new design for the Director Collection that allows

us to fit an 8-inch woofer into a typical 6-inch baffle.

Even more impressive we are able to fit a 10-inch

woofer into a typical 8-inch baffle. What does this

mean? It’s more bass in less space. The footprint

in the ceiling is smaller and less obtrusive, but the

sound they deliver must be heard to be believed.

WIDE DISPERSION: Greater dispersion means more coverage from every speaker

and it creates a much larger listening area in every room.

LIMITED DISPERSION: A typical in-ceiling speaker’s tight dispersion pattern creates

a very limited listening area and requires a larger number of speakers to give

adequate coverage in the living space.

PIVOTAL ACTIONS: A full 36° of pivot allows for

incredible flexibility in speaker placement.

PIVOTAL POINT: Although some in-ceiling speakers

can pivot, the angle they can achieve is so small it

requires the speakers to be almost directly overhead.

8

10

6” Cutout

8” Cutout

Origin Speaker

*Patent Pending

6”

Page 9: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

9

Installation is a Zip

The Zip-Clips* are squeezed into place by hand sandwiching the

drywall between the outside flange and the clips inside the wall.

It is important when installing a loudspeaker in

the ceiling that it be stable and secure, restrict-

ing the vibration of the assembly and limiting

transfer of energy into the wall. The revolution-

ary Zip-Clip* (patent pending) system spreads

the weight of the speaker over a larger area than

typical mounting systems accomplishing this

result with minimal effort. Spring-loaded clips

also create more uniform pressure against the

drywall eliminating any warping or distortion

of the speaker baffle as well as eliminating any

stress or cracking of the drywall.

The process requires no tools. A revolution-

ary design that incorporates a mounting ring

that fits into the hole in the drywall and is then

secured by four clips that are hand squeezed

into place creating the optimum amount of

torque to secure the speaker. The speaker as-

sembly is then inserted into the mounting ring

and twisted clockwise to lock it in place.

“It’s obvious that these guys have actually spent time on a ladder installing speakers in the real world because the ZipClip mounting system is revolutionary for simplifying the install process.”

― John Sciacca, Residential Systems Magazine

Page 10: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

10

The Director Collection is the culmination of a combined 100+ years in producing the finest

sounding in-ceiling speakers. Every aspect of the Director Collection is purposed towards

producing full-range high fidelity music with as little visibility as possible. Utilizing the finest

materials and a unique pivoting assembly to direct the sound precisely where it is needed,

these speakers become transparent points of sound in any room. Never before has this level

of overall performance been available in an in-ceiling speaker.

Director CollectionIn-Ceiling Audio System

“In overall performance, the Origin Acoustics D108s are the best in-ceiling speakers I have ever heard.”

― Darryl Wilkinson, Sound & Vision Magazine

“…these [D86s] sounded rather less like installation speakers and more like high quality bookshelf models.”

― Stephen Dawson, Connected Home Magazine

Page 11: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

11

Director Collection

The Director 60 Collection is both powerful and discreet. Its two-way design in four performance

levels offers a solution for systems that demand sonic purity in smaller spaces. Sharing

technologies with its larger siblings, the 60 Collection will surprise listeners with its detail and

impact.

Better bass response and greater output level in the Director 80 Collection is obvious the

moment it goes active. The unique Tri-Linear Configuration*, three-way driver configuration

features the FocalPoint* mid-tweeter module that pivots to aim the sound in any direction as

needed. However, its most amazing feature is fitting all of this performance into a flush mount

package the size of a standard 6” ceiling speaker. The Director 80 Collection is available in four

performance levels and sets a new sonic standard for speakers in this diameter.

When real dynamic bass from the ceiling is the demand, the Director 100 Collection is the obvious

answer. A massive 10” woofer backs up the incredible FocalPoint* mid/tweeter assembly in

our TriLinear Configuration*. The FocalPoint* also pivots to assure the sound ends up exactly

where it needs to be. In addition, this 10” speaker astoundingly fits into a footprint the size of a

conventional 8”. Choose one of three performance levels and the Director 100 is sure to impress.

Featuring the smallest footprint in the collection, Director 30 speakers offer an even distribution

of sound performance with a minimal aesthetic that mimics designer recessed lighting.

Director 100 Collection

Director 80 Collection

Director 60 Collection

Director 30 Collection

In-Ceiling Audio System

*Patent Pending

Page 12: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

12

Tri-Linear Configuration* (TLC)The Director Collection features three drivers in a unique linear alignment. This three-way design allows for broader frequency response and superior power handling. The 3-inch midrange is made of hand-select materials and the tweeter is our proprietary DPSD™ radiator.

7 New Inventions / Patents

Director TechnologyThe ability to point or “direct” the sound toward a specific area in the room is critical when the speakers are mounted in the ceiling. The Director 80 and 100 series features a mid-tweeter assembly that can be adjusted to focus the sound toward the listening area regardless of the speaker’s position in the ceiling. This allows for the speakers to be used in many applications. One example is a home theater where the soundstage, relative to the screen, is crucial. The seating area can be off axis and still remain in the “sweet-spot.”

Dual Plane Stabilized Diaphragm (DPSD™)

A patented innovation that dramatically improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that maintains the tweeters alignment throughout a larger frequency range. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion.

X-Wave* Woofer SurroundWhile in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave* surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround.

Progressive SuspensionAs the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver’s frequency range.

Compression Molded Woofer Baskets

Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance.

Zip-Clip* Mounting SystemIt is important when installing a loudspeaker in the ceiling that it be stable and secure, restricting the vibration of the assembly and limiting transfer of energy into the wall. The revolutionary Zip-Clip* system spreads the weight of the speaker over a larger area than typical mounting systems accomplishing this result with minimal effort. Spring-loaded clips also create more uniform pressure against the drywall eliminating any warping or distortion of the speaker baffle.

Page 13: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

13

• 10” Kevlar™ woofer• Butyl rubber X-Wave™ surrounds• FocalPoint™ 36° pivoting mid/

tweeter module• Pivoting 4” Kevlar™ midrange• Pivoting ¾” DPSD™ silk dome

tweeter• Zip-Clip* tool-less mounting

• Adjustable woofer/tweeter levels• Frequency Response: 25Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-250 watts• Sensitivity: 91dB ± 3dB• Diameter: 11¼” (286mm)• Cutout Diameter: 10⅜” (264mm)• Mounting Depth: 7½” (188mm)

Director CollectionModel: D108Part: SCD100800

• 10” IMG woofer• Butyl rubber X-Wave™ surrounds• FocalPoint™ 36° pivoting

midtweeter module• Pivoting 4” IMG midrange• Pivoting ¾” aluminum dome

tweeter• Zip-Clip* tool-less mounting

• Adjustable tweeter level• Frequency Response: 28Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-185 watts• Sensitivity: 90dB ± 3dB• Diameter: 11¼” (286mm)• Cutout Diameter: 10⅜” (264mm)• Mounting Depth: 7½” (188mm)

Model: D104Part: SCD100400

• 10” glass fiber woofer• Butyl rubber X-Wave™ surrounds• FocalPoint™ 36° pivoting mid/

tweeter module• Pivoting 4” glass fiber midrange• ¾” DPSD™ silk dome tweeter• Zip-Clip* tool-less mounting• Adjustable woofer/tweeter levels

• Frequency Response: 28Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-200 watts• Sensitivity: 91dB ± 3dB• Diameter: 11¼” (286mm)• Cutout Diameter: 10⅜” (264mm)• Mounting Depth: 7½” (188mm)

Model: D106Part: SCD100600

*Patent Pending

In-Ceiling Speakers

Enclosure: FB10

Bracket: BR10

Enclosure: FB10

Bracket: BR10

Enclosure: FB10

Bracket: BR10

Page 14: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

14

• 8” Kevlar™ woofer• Butyl rubber X-Wave™ surrounds• FocalPoint™ 36° pivoting mid/

tweeter module• Pivoting 4” Kevlar™ midrange• Pivoting ¾” DPSD™ silk dome

tweeter• Zip-Clip* tool-less mounting

• Adjustable woofer/tweeter levels• Frequency Response: 30Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-200 watts• Sensitivity: 90dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 7⅜” (187mm)

Model: D88Part: SCD80800

• 8” glass fiber woofer• Butyl rubber X-Wave™ surrounds• FocalPoint™ 36° pivoting mid/

tweeter module• Pivoting 4” glass fiber midrange• Pivoting ¾” DPSD™ silk dome

tweeter• Zip-Clip* tool-less mounting

• Adjustable woofer/tweeter levels• Frequency Response: 34Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-175 watts• Sensitivity: 90dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 7⅜” (187mm)

Model: D86Part: SCD80600

Director Collection

All 6” and 8” speakers in the Director and ThinFit Collections fit into the same size hole, giving

you and your customers a flexible upgrade path with models ranging in price from $160/ea to

$1,250/ea MSRP.

16 Different Models With the Same Fit

In-Ceiling Speakers

Enclosure: FBD82X8

Bracket: BR68

Enclosure: FBD82X8

Bracket: BR68

Page 15: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

15

• 8” IMG woofer• Butyl rubber X-Wave™ surround• Pivoting 1” aluminum dome

tweeter• Zip-Clip* tool-less mounting

• Frequency Response: 38Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-125 watts• Sensitivity: 89dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 5⅜” (135mm)

Model: D82Part: SCD80200

• 8” poly/rubber woofer• Butyl rubber X-Wave™ surround• Pivoting 1” silk dome tweeter• Zip-Clip* tool-less mounting

• Frequency Response: 38Hz-20kHz• Impedance: 8 ohm• Power Handling: 20-100 watts• Sensitivity: 87dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 4” (94mm)

Model: D80Part: SCD80000

Director Collection

• 8” IMG woofer• Butyl rubber X-Wave™ surrounds• FocalPoint™ 36° pivoting mid/

tweeter module• Pivoting 4” IMG midrange• Pivoting ¾” aluminum dome

tweeter• Zip-Clip* tool-less mounting

• Adjustable tweeter level• Frequency Response: 36Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-150 watts• Sensitivity: 89dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 7⅜” (187mm)

Model: D84Part: SCD80400

*Patent Pending

In-Ceiling Speakers

Enclosure: FBD82X8

Bracket: BR68

Enclosure: FBD82X8FBD82X6

Bracket: BR68

Enclosure: FBD82X8FBD82X6

Bracket: BR68

Page 16: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

16

• Pivoting 6½” Kevlar™ woofer• Butyl rubber X-Wave™ surround• Pivoting 1” DPSD™ silk dome

tweeter• Zip-Clip* tool-less mounting• Adjustable bass/treble levels

• Frequency Response: 40Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-160 watts• Sensitivity: 90dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 5⅜” (135mm)

Model: D68Part: SCD60800

• Pivoting 6½” IMG woofer• Butyl rubber X-Wave™ surround• Pivoting 1” aluminum dome

tweeter• Zip-Clip* tool-less mounting• Adjustable tweeter level

• Frequency Response: 45Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-140 watts• Sensitivity: 89dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 5⅜” (135mm)

Model: D64Part: SCD60400

• Pivoting 6½” glass fiber woofer• Butyl rubber X-Wave™ surround• Pivoting 1” DPSD™ silk dome

tweeter• Zip-Clip* tool-less mounting• Adjustable bass/treble levels

• Frequency Response: 43Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-150 watts• Sensitivity: 90dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 5⅜” (135mm)

Model: D66Part: SCD60600

Director CollectionIn-Ceiling Speakers

Enclosure: FBD82X8FBD82X6

Bracket: BR68

Enclosure: FBD82X8FBD82X6

Bracket: BR68

Enclosure: FBD82X8FBD82X6

Bracket: BR68

Page 17: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

17

• 6½” IMG woofer• Butyl rubber X-Wave™ surround• Pivoting 1” aluminum dome

tweeter• Zip-Clip* tool-less mounting

• Frequency Response: 48Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-125 watts• Sensitivity: 89dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 33∕5” (92 mm)

Director CollectionModel: D62Part: SCD60200

• 3” Kevlar™ woofer• Butyl rubber X-Wave™ surround• Silk DPSD™ tweeter• Zip-Clip* tool-less mounting• Available with round or square

bezel-less magnetic grilles

• Frequency Response: 75Hz-20kHz• Impedance: 8 ohm• Power Handling: 20-100 watts• Sensitivity: 83dB ± 3dB• Diameter: 41⁄4” (108mm)• Cutout Diameter: 3.25” (83mm)• Mounting Depth: 3⅓” (86mm)

Model: D38Part: SCD30800

• 6½” poly/rubber woofer• Butyl rubber X-Wave™ surround• Pivoting 1” silk dome tweeter• Zip-Clip* tool-less mounting

• Frequency Response: 48Hz-20kHz• Impedance: 8 ohm• Power Handling: 20-100 watts• Sensitivity: 86dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 33∕5” (92 mm)

Model: D60Part: SCD60000

*Patent Pending

In-Ceiling Speakers

Enclosure: FBD82X8FBD82X6

Bracket: BR68

Enclosure: FBD82X8FBD82X6

Bracket: BR68

Bracket: BR3

Page 18: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

18

What about sound in those areas that don’t require or even allow

for a stereo pair of speakers? The Director D82 and D62 DT/SUR will

reproduce both the left and right channels from a single speaker.

Now bathrooms, hallways, even walk-in closets can be filled with

music.

The flexibility of the Director D82 and D62 DT/SUR doesn’t end with

their single-speaker stereo capability. A switch on the back of the

speaker can convert it to a dedicated surround speaker in a dipole

configuration. This enhances dispersion enveloping the listener in

rear-channel ambiance in home theater applications.

Director Dual TweeterIn-Ceiling Speakers

Page 19: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

19

• 8” DVC IMG woofer• Butyl rubber X-Wave™ surround• 1” dual aluminum tweeters• 2 channels from a single speaker• Zip-Clip* tool-less mounting• Switchable to single channel

surround

• Frequency Response: 38Hz-20kHz• Impedance: 8 ohm• Power Handling: 50-125 watts• Sensitivity: 89dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 33∕5” (92 mm)

Model: D82DT/SURPart: SCD2T80200

• 6½” poly/rubber woofer• Butyl rubber X-Wave™ surround• 1” dual silk tweeters• 2 channels from a single speaker• Zip-Clip* tool-less mounting

• Frequency Response: 48Hz-20kHz• Impedance: 8 ± 8 ohm• Power Handling: 20-100 watts• Sensitivity: 86dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 33∕5” (92 mm)

Model: D60DTPart: SCD2T60000

• 6½” DVC IMG woofer• Butyl rubber X-Wave™ surround• 1” dual aluminum tweeters• 2 channels from a single speaker• Zip-Clip* tool-less mounting• Switchable to single channel

surround

• Frequency Response: 48Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-125 watts• Sensitivity: 89dB ± 3dB• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 33∕5” (92 mm)

Model: D62DT/SURPart: SCD2T60200

Director DT Collection

*Patent Pending

In-Ceiling Speakers

Enclosure: FBD82X8FBD82X6

Bracket: BR68

Enclosure: FBD82X8FBD82X6

Bracket: BR68

Enclosure: FBD82X8FBD82X6

Bracket: BR68

Page 20: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

20

The increasing popularity of smaller recessed light opening has

created a huge demand for speakers that “line up” with ceiling

lighting. Delivering even under the meticulous constraints of the

interior design community, the Director Minimal Opening System

leaves the smallest visible imprint, whether the lights are square or

round, without compromising sound quality. Minified 3” Director

satellites and a unique bandpass in-ceiling subwoofer line up with

the lights to form a musical arrangement with spotless coverage

and full-range output.

Minimal Opening™ SystemIn-Ceiling Audio System

Page 21: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

21

The Director Minimal Opening System leaves a 4” finish to match interior lighting. This package includes

four D38s with square and round grilles, an in-ceiling subwoofer with the 4” trim finish kit and port tube to

match. We recommend using the SUBA150 subwoofer amplifier for the DSUB6F3 to augment the low-end

bass response of the system and the A2150 two-channel amplifier for the four D38 satellites. The package

distributes a full-frequency performance disguised in the appearance small aperture home lighting.

• DSUB6F3: Dual 6” Subwoofer• D38: 3” Kevlar™ Speakers (4)• MDF Band Pass Enclosure• 4” Port Tube• Port Tube Length:19” (480mm)

• Mini-Port Connector • New Construction bracket• 4¼” Square & Round Grilles• L/R In & Out Terminals

Model: DMO3Part: DMO3000

Minimal Opening™ SystemIn-Ceiling Audio System

Line it up with the Lights

• Frequency Response: 37Hz-20kHz• Power Handling: 100 Watts• Impedance: 8 ohm

• Sensitivity: 86dB ± 3dB• Diameter: 4¼” (108mm)• Cutout Diameter: 3½” (89mm)

System Specifications

Recommended Amplification

Model: A2150Part: AMP02X15000

• Two Channel, Stereo Amplifier • 150 watts of Class D power per channel

Page 22: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

22

Carefully crafted with an impressive price to performance ratio, the

Producer Collection is our entry-level offering that is anything but

entry-level in sound quality. With five in-ceiling models there are

a variety of options for any number of applications. The collection

includes two dual-tweeter models producing stereo from a single

speaker, a perfect solution for hallways, bathrooms and walk-in

closets.

Producer CollectionIn-Ceiling Speakers

Page 23: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

23

• 8” polypropylene woofer• Pivoting 1” silk dome tweeter• Butyl rubber surround

• Frequency Response: 38Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-100 watts• Sensitivity: 88dB ± 3dB• Diameter: 10¾” (273mm)• Cutout Diameter: 9¾” (247mm)• Mounting Depth: 3⅞” (96mm)

Model: P80Part: SCP80100

• 6½” polypropylene woofer• Pivoting 1” silk dome tweeter• Butyl rubber surround

• Frequency Response: 48Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-100 watts• Sensitivity: 86dB ± 3dB• Diameter: 8¾” (223mm)• Cutout Diameter: 8” (202mm)• Mounting Depth: 3⅝” (90mm)

Model: P60Part: SCP60100

• 6½” IMG woofer• Pivoting 1” aluminum dome

tweeter• Butyl rubber surround

• Frequency Response: 48Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-100 watts• Sensitivity: 86dB ± 3dB• Diameter: 8¾” (223mm)• Cutout Diameter: 8” (202mm)• Mounting Depth: 3⅝” (90mm)

Model: P61Part: SCP60150

Producer CollectionIn-Ceiling Speakers

Enclosure: FBP8

Bracket: BRP8

Enclosure: FBP6

Bracket: BRP6

Enclosure: FBP6

Bracket: BRP6

Page 24: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

24

Stereo from a single speaker is advantageous when the system

blends stereo pairs and single speakers in the same zone. There is

no need to electronically change the system to a mono signal and

feed these speakers independently of their stereo counterparts.

Both channels are reproduced from a single location, perfect for

smaller rooms or hallways.

Producer Dual TweeterIn-Ceiling Speakers

Page 25: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

25

• 8” DVC polypropylene woofer• Butyl rubber surround• 1” dual silk dome tweeters• 2 channels from a single speaker

• Frequency Response: 38Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-100 watts• Sensitivity: 88dB ± 3dB• Diameter: 10¾” (273mm)• Cutout Diameter: 9¾” (247mm)• Mounting Depth: 3⅞” (96mm)

Model: P80DTPart: SCP2T80100

• 6½” DVC polypropylene woofer• Butyl rubber surround• 1” dual silk dome tweeters• 2 channels from a single speaker

• Frequency Response: 48Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-100 watts• Sensitivity: 86dB ± 3dB• Diameter: 8¾” (223mm)• Cutout Diameter: 8” (202mm)• Mounting Depth: 3⅝” (90mm)

Model: P60DTPart: SCP2T60400

Producer Dual Tweeter

*Patent Pending

In-Ceiling Speakers

Enclosure: FBP8

Bracket: BRP8

Enclosure: FBP6

Bracket: BRP6

Page 26: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

26

Designed as a solution for restrictive installation applications, the

ThinFit Collection addresses the need for a shallow-mount speaker

with a depth of only 70mm. The fully integrated acoustic enclosures

protect the inner part of the speaker, improve sonic consistency, and

limit the transfer of sound into adjoining rooms. All three models

fit into the standard 6”/8” Director new construction bracket and

include a sleek bezel-less grille.

ThinFit CollectionShallow-Depth In-Ceiling Speakers

Page 27: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

27

• Dual 3½” glass fiber woofers • Dual 3½” glass fiber Mid-woofers • Butyl rubber surrounds • ¾” DPSD™ dome tweeter • Integrated powder-coated steel

acoustic enclosure

• Frequency Response: 50Hz-20kHz • Impedance: 8 ohm • Power Handling: 5-110 watts • Sensitivity: 89dB ± 3dB • Diameter: 9⅝” (244mm)• Cutout Diameter: 8¾” (222mm) • Mounting Depth: 2¾” (70mm)

Model: TF36Part: STF3600

• 6½” IMG DVC woofer• Butyl rubber X-Wave* surround• ¾” dual aluminum dome tweeters• Integrated powder-coated steel

acoustic enclosure

• Frequency Response: 45Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-140 watts• Sensitivity: 89dB ± 3dB• Diameter: 9⅝” (244mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 2¾” (70mm)

Model:TF64DTPart: STF2T6400

• Dual 3½” IMG woofers• Dual 3½” IMG mid-woofers• Butyl rubber surrounds• ¾” aluminum dome tweeter• Integrated powder-coated steel

acoustic enclosure

• Frequency Response: 55Hz-20kHz• Impedance: 8 ohm• Power Handling: 5-90 watts• Sensitivity: 89dB ± 3dB• Diameter: 9⅝” (244mm)• Cutout Diameter: 8¾” (222mm)• Mounting Depth: 2¾” (70mm)

Model: TF34Part: STF3400

ThinFit Collection

*Patent Pending

Shallow-Depth In-Ceiling Speakers

Enclosure: FBD82X6

Bracket: BR68

Enclosure: FBD82X6

Bracket: BR68

Enclosure: FBD82X6

Bracket: BR68

Page 28: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

28

Home Theater envelops us and allows anyone to escape into the greatest worlds man

can imagine. From a simple 5.1 set up to the most amazing Dolby Atmos system, cinema

is all about creating an immersive reality with sound detailed every bit as rich and full as

real life.

The Theater Collection uses larger woofers and midrange drivers than any

design we have engineered before. Quad six and a half inch drivers partner

with our patented DPSD™ 1” tweeter to deliver the accuracy and sonic

linearity that was once only reserved for the worlds finest box speakers. We

are proud of our new collection and know they will exceed the most critical

expectations.

THTR CollectionIn-Wall Home Theater Speakers

“I loved how the bass line sat in the soundstage behind the vocals with enough clarity to hear each individual note without sounding mushy.”

― Robert Archer, CE Pro Magazine

Page 29: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

29

• 6½” Kevlar™ woofers • Butyl rubber surround• Pivoting 1” DPSD™ silk dome

tweeter• Three-way crossover• Spring-Lock* tool-less mounting

• Frequency Response: 38Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-200 watts• Sensitivity: 90 ± 3dB• Dimensions: 8.875x30.125”

(225x765mm)• Cutout Dimensions: 7.875x29”

(200x737mm)• Mounting Depth: 3¾” (95mm)

Model: THTR68Part: SWML30800

• 6½” glass fiber woofers• Butyl rubber surround• Pivoting 1” DPSD™ silk dome

tweeter• Three-way crossover• Spring-Lock* tool-less mounting

• Frequency Response: 40Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-200 watts• Sensitivity: 90 ± 3dB• Dimensions: 8.875x30.125”

(225x765mm)• Cutout Dimensions: 7.875x29”

(200x737mm)• Mounting Depth: 3¾” (95mm)

Model: THTR66Part: SWML30600

THTR Collection

*Patent Pending

In-Wall Home Theater Speakers

Bracket: BRL30

Bracket: BRL30

Page 30: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

30

Delivering impact and clarity, the Composer LCR60 Collection

has the right combination of size and performance to create an

immersive sonic experience in any room. Whether being used as the

front and rear channels of a home theater or as a stereo pair for a

dedicated music system, these speakers will reproduce every detail

with precision while remaining hidden in the wall.

LCR 60 CollectionIn-Wall Speakers

Page 31: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

31

• Dual 6½” Kevlar™ woofers• Butyl rubber surrounds• Pivoting 1” DPSD™ silk dome

tweeter• Adjustable woofer/tweeter levels• Spring-Lock* tool-less mounting• Fits between 16” on-center studs

• Frequency Response: 53Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-175 watts• Sensitivity: 90dB ± 3dB• Dimensions: 7.875 x 15.563” (200 x

395mm)• Cutout Dimensions: 6⅝ x 14⅜”

(168 x 364mm)• Mounting Depth: 3¾” (95mm)

Model: LCR68Part: SWML14800

• Dual 6½” IMG woofer• Butyl rubber X-Wave™ surrounds• Pivoting 1” aluminum dome

tweeter• Spring-Lock* tool-less mounting• Adjustable tweeter level• Fits between 16” on-center studs

• Frequency Response: 55Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-150 watts• Sensitivity: 90dB ± 3dB• Dimensions: 7.875 x 15.563” (200 x

395mm)• Cutout Dimensions: 6⅝ x 14⅜”

(168 x 364mm)• Mounting Depth: 3¾” (95mm)

Model:LCR64Part: SWML14400

• Dual 6½” glass fiber woofers• Butyl rubber surrounds• Pivoting 1” DPSD™ silk dome

tweeter• Adjustable woofer/tweeter levels• Spring-Lock* tool-less mounting• Fits between 16” on-center studs

• Frequency Response: 55Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-150 watts• Sensitivity: 90dB ± 3dB• Dimensions: 7.875 x 15.563” (200 x

395mm)• Cutout Dimensions: 6⅝ x 14⅜”

(168 x 364mm)• Mounting Depth: 3¾” (95mm)

Model: LCR66Part: SWML14600

LCR 60 Collection

*Patent Pending

In-Wall Speakers

Enclosure: FB15S

Bracket: BRL15

Enclosure: FB15S

Bracket: BRL15

Enclosure: FB15S

Bracket: BRL15

Page 32: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

32

When space becomes a major consideration, finding a speaker that

is both diminutive yet still packs a punch is not easy. Fortunately

the Composer LCR30 Collection fits the bill. It borrows from the

technology of its larger siblings and delivers remarkable sound

quality in a package that is downright tiny. But don’t let its size

mislead you. This is real sound for installations that require the

smallest footprint possible.

LCR 30 CollectionIn-Wall Speakers

Page 33: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

33

• Dual 3½” Kevlar™ woofers• Butyl rubber X-Wave* surrounds• Pivoting 1” DPSD™ silk dome

tweeter• Adjustable woofer/tweeter levels• Spring-Lock™ tool-less mounting

• Frequency Response: 70Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-80 watts• Sensitivity: 90dB ± 3dB• Dimensions: 5.688 x 10.625” (144 x

270mm)• Cutout Dimensions: 4⅜ x 9½” (122

x 240mm)• Mounting Depth: 3¾” (95mm)

Model: LCR38Part: SWML10800

• Dual 3½” glass fiber woofers• Butyl rubber X-Wave* surrounds• Pivoting 1” DPSD™ silk dome

tweeter• Adjustable woofer/tweeter levels• Spring-Lock™ tool-less mounting

• Frequency Response: 70Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-80 watts• Sensitivity: 90dB ± 3dB• Dimensions: 5.688 x 10.625” (144 x

270mm)• Cutout Dimensions: 4⅜ x 9½” (122

x 240mm)• Mounting Depth: 3¾” (95mm)

Model: LCR36Part: SWML10600

LCR 30 Collection

*Patent Pending

In-Wall Speakers

Enclosure: FB10S

Bracket: BRL10

Enclosure: FB10S

Bracket: BRL10

Page 34: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

34

When the paradigm shift from cabinet speakers to in-wall speakers

took place decades ago, this was the size for which everyone

clamored. It was small enough to be discreet while being large

enough to produce both full frequency and enough sound pressure

to fill a room. The C60 Collection dramatically renews this tradition

with advanced driver technology and a very attractive form factor.

It is perfect in the bedroom or the bathroom and is great for both

music and theater sound.

C60 CollectionIn-Wall Speakers

Page 35: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

35

• 4x8” Kevlar™ woofer• Butyl rubber X-Wave* surround• Pivoting 1” DPSD™ silk dome tweeter• Adjustable woofer/tweeter levels• Spring-Lock™ tool-less mounting• Frequency Response: 40Hz-20kHz• Impedance: 8 ohm

• Power Handling: 25-140 watts• Sensitivity: 89dB ± 3dB• Dimensions: 5.75 x 12” (140 x 305mm)• Cutout Dimensions: 4⅝ x 11” (118 x

278mm)• Mounting Depth: 3¾” (95mm)

Model: C68Part: SWM12800

• 4x8” IMG woofer• Butyl rubber X-Wave* surround• Pivoting 1” aluminum dome tweeter• Spring-Lock™ tool-less mounting• Adjustable tweeter levels• Frequency Response: 45Hz-20kHz• Impedance: 8 ohm

• Power Handling: 25-110 watts• Sensitivity: 89dB ± 3dB• Dimensions: 5.75 x 12” (140 x 305mm)• Cutout Dimensions: 4⅝ x 11” (118 x

278mm)• Mounting Depth: 3¾” (95mm)

Model: C64Part: SWM12400

• 4x8” glass fiber woofer• Butyl rubber X-Wave* surround• Pivoting 1” DPSD™ silk dome tweeter• Adjustable woofer/tweeter levels• Spring-Lock™ tool-less mounting• Frequency Response: 43Hz-20kHz• Impedance: 8 ohm

• Power Handling: 25-125 watts• Sensitivity: 89dB ± 3dB• Dimensions: 5.75 x 12” (140 x 305mm)• Cutout Dimensions: 4⅝ x 11” (118 x

278mm)• Mounting Depth: 3¾” (95mm)

Model: C66Part: SWM12600

C60 Collection

*Patent Pending

• 4x8” IMG woofer• Butyl rubber X-Wave* surround• Pivoting 1” aluminum dome tweeter• Spring-Lock™ tool-less mounting• Frequency Response: 45Hz-20kHz• Impedance: 8 ohm• Power Handling: 25-110 watts

• Sensitivity: 89dB ± 3dB• Dimensions: 5.75 x 12” (140 x 305mm)• Cutout Dimensions: 4⅝ x 11” (118 x

278mm)• Mounting Depth: 3¾” (95mm)

Model: C62Part: SWM12200

In-Wall Speakers

Enclosure: FB12S

Bracket: BRL12

Enclosure: FB12S

Bracket: BRL12

Enclosure: FB12S

Bracket: BRL12

Enclosure: FB12S

Bracket: BRL12

Page 36: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

36

No audio system is complete without the presence of deep powerful

bass. Since inventing the in-wall subwoofer back in the 1980’s, the

Origin Acoustics team has learned many tricks of the trade. The

Composer In-Wall subwoofers are a true culmination of over 30

years in engineering the highest performing subs within the lowest

profile enclosures.

The aluminum build of our in-wall subwoofers provides tremendous

acoustical enhancements. By using dense pure aluminum cabinets

instead of MDF we’re able to increase the air volume driving the

cone’s powerful pulse. The extremely low resonance frequency and

efficient dissipation of heat make our aluminum subwoofers more

than capable of adding a deep dose of bass without shaking the

walls.

Composer SubwoofersIn-Wall Subwoofers

Page 37: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

37

• 10” Aluminum Long Throw Subwoofer

• Rubber Sound Dampening• Mountable Faceplate & Woofer for

CSUB10NCE• Must be used with CSUB10NCE

(Enclosure)

• Must be used with Origin SUBA150 or SUBA500 DSP Amps (sold separately)

• Frequency Response: 30Hz-250Hz• Power Handling: 250 watts• Dimensions: 3.5 x 13 x 44” (88 x 330

x 1120mm)• Cutout Dimensions: 10.55 x 10.55”

(268 x 268mm)

Model: CSUB10NPart: CSUB1000AN

• 10” Aluminum Long Throw Subwoofer

• Rubber Sound Dampening• Aluminum Slide enclosure with

CabinSpace™ Cap• Must be used with Origin SUBA150

or SUBA500 DSP Amps (sold separately)

• Frequency Response: 33Hz-250Hz• Power Handling: 250 watts• Dimensions: 3.5 x 13 x 17” (88 x 330

x 430mm)• Cutout Dimensions: 10.55 x 10.55”

(268 x 268mm)

Model: CSUB10RPart: CSUB10000AR

Composer Subwoofers

*Patent Pending

Model: CSUB10NCEPart: CSUB10000NCE

• Ultra Dense Aluminum Cabinet• High-Wire™ Progressive

Suspension Mounting System• Must be used with CSUB10N• Top & Bottom Dual Voice Coil

Inputs

• Dimensions: 3.5 x 13 x 44” (88 x 330 x 1120mm)

• Cutout Dimensions: 10.55 x 10.55” (268 x 268mm)

Model: SUBA500Part: AMPSUB1X500

• 500 Watt Subwoofer Amplifier w/ DSP Presets

Model: SUBA150Part: AMPSUB1X150

• 150 Watt Subwoofer Amplifier

In-Wall Subwoofers

Page 38: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

38

The Director Dual 6.5” Multi-Finish In-Ceiling Subwoofer delivers

tight bass with flexible port options to match either small 4” light-

ing opening or any 6” and 8” speakers in the Director Collection.

Carefully engineered with a dual-firing woofer design and bandpass

enclosure, the DSUB6 brings bass to the forefront of any in-ceiling

performance with unmatched aesthetics.

Director SubwoofersMulti-Finish In-Ceiling Subwoofers

Page 39: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

39

• Dual 6” Anti-Vibration Woofers• MDF band pass enclosure• 4” Port Tube• Port Tube Length: 19” (480mm)• Mini-port connector • New Construction bracket• 4¼” Square & Round Grilles• L/R In & Out Terminals

• Frequency Response: 33Hz-20kHz• Power Handling: 100 Watts• Impedance: 8 ohm• Sensitivity: 87dB ± 3dB• Dimensions: 7.9 x 11.75 x 17” (200 x

298 x 430mm)• Diameter: 4¼” (108mm)• Cutout Diameter: 3½” (89mm)

Director Subwoofers

*Patent Pending

Multi-Finish In-Ceiling Subwoofers

Model: DSUB6F3Part: DSUB6F300

• Dual 6” Anti-Vibration Woofers• MDF band pass enclosure• 6” Port Tube• Port Tube Length: 29½ (750mm)• Zip-Clip* tool-less mounting• Port Adapter• BR68 New Construction bracket• 9⅝” Round Grille Included (SQ68:

Square Grille Sold Separately)

• L/R In & Out Terminals• Frequency Response: 33Hz-20Hz• Power Handling: 150 Watts• Impedance: 6 ohm• Sensitivity: 87dB ± 3dB• Dimensions: 7.9 x 11.75 x 17” (200 x

298 x 430mm)• Diameter: 10” (254mm)• Cutout Diameter: 8¾” (222mm)

Model: DSUB6F68Part: DSUB6F680

Model: SUBA150Part: AMP02X15000

• One Channel, Stereo Amplifier • 1U Compact Design

Recommended Amplification

Page 40: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

40

Bass frequencies are the foundation of any audio

performance. They fill the room with impact and

drive emotion in every listening session. The Bassic

Subwoofers deliver this dramatic and dynamic portion

of the sound experience through the matching of rugged

and powerful amplification with high-performance

drivers. The Bassic Subwoofers are available in four

sizes with 8-inch, 10-inch and 12-inch drivers powered

by 100, 150 and 250 watts of digital amplification.

Bassic SubwoofersSubwoofers

Page 41: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

41

• 12” Aluminum woofer• Front mounted controls• Inputs: L/R Line level, LFE, High

level speaker• Outputs: High level speaker output

• Controls: Level, Phase, Crossover• Power Rating: Class D 250 Watts• WxHxD: 18” x 16” x 18½”• High gloss finish

Model: SUB12Part: SBXSUB1200800

• 8” Aluminum woofer• Inputs: L/R Line level, LFE, High

level speaker• Outputs: High level speaker output• Controls: Level, Phase, Crossover

• Power Rating: Class D 100 Watts• WxHxD: 12” x 12” x 12”• High gloss finish

Model:SUB8Part: SBXSUB80400

• 10” Aluminum woofer• Front mounted controls• Inputs: L/R Line level, LFE, High

level speaker• Outputs: High level speaker output

• Controls: Level, Phase, Crossover• Power Rating: Class D 150 Watts• WxHxD: 16” x 14” x 16”• High gloss finish

Model: SUB10Part: SBXSUB100600

Bassic Subwoofers

*Patent Pending

• 10” Aluminum woofer• Inputs: L/R Line level, LFE• USB 5.V for charging wireless

adapters• Controls: Level, Phase, Crossover

• Power Rating: Class D 150 Watts• WxHxD: 13” x 13” x 13”• Black ash vinyl finish

Model:SUBV10Part: SBXSUBV100600

Subwoofers

Page 42: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

42

Landscape Design Services

We understand that designing a perfect landscape system to WOW your customers can be chal-

lenging and time-consuming. Origin Acoustics has committed top talent from their team to

provide you and your client with amazing turn-key landscape system designs, complete with

detailed illustrations and instructions for installation as well as a detailed proposal with system

pricing. In utilizing this service, we’ve found that our dealers are able to close more jobs and

generate 2 to 3 times more revenue.

To learn more about this awesome program, contact our office at 844.674.4461

Step 1Log in to the Origin website and fill out

the “Design Services Questionaire”

found under Dealer Resources. Submit

the completed form via email to sales@

originacoustics.com. This will provide

our team with basic information regard-

ing your client’s expectations to get us

started.

Step 3Present your client with the exclusive

materials provided by the Origin Design

Services team and close the deal on pro-

viding them with the ultimate outdoor

listening experience, custom-tailored to

their needs.

Step 2Allow us to quickly prepare a custom-

ized speaker layout diagram using your

client’s landscape, a product proposal,

and a powerpoint presentation with

system specifications and easy to read

installation instructions.

Landscape Audio System

Page 43: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

43

Landscape Design Services

*Patent Pending

Custom Tailored Landscape Audio Systems

Landscape Audio System

Page 44: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

44

Filling your outdoor environment with quality music that appears to

come from nowhere is now a very real expectation. The Landscape

Collection includes two models of speakers in enclosures that mimic

lighting fixtures. To create an even more dramatic presence, the

Collection includes high-performance subwoofers that are buried in the

ground and completely fill out the bottom end. Hidden away in flower

beds and planters or placed around the pool or other water features,

these speakers can fill the entire yard with a sound that is sure to

enhance every outdoor event from a pool party to a wedding reception.

Seasons Landscape CollectionLandscape Audio System

Page 45: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

45*Patent Pending

• 6” polypropylene woofer• 1” titanium dome tweeter• Passive radiator• PolyComposite, weather resistant enclosure• Switchable 8-ohm and multiple 70v taps• Frequency Response: 60Hz-20kHz ± 3dB

Model: LS64Part: OLS6600

• 4” polypropylene woofer• .75” titanium dome tweeter• PolyComposite, weather resistant enclosure• Switchable 8-ohm and multiple 70v taps• Frequency Response: 80Hz-20kHz ± 3dB

Model: LS44Part: OLS4400

Seasons Landscape Collection

Mounts Sold Separtately

Mounts Sold Separtately

Landscape Satellite Speakers

Page 46: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

46

• 12” polypropylene woofer• PolyComposite, weather resistant enclosure• 70v• In-ground installation

Model: OSUB12Part: OSUB12000

• 10” polypropylene woofer• PolyComposite, weather resistant enclosure• 70v• In-ground installation

Model: OSUB10Part: OSUB10000

Seasons Landscape Collection

• 8” polypropylene woofer• PolyComposite, weather resistant enclosure• Switchable 8-ohm and 70v• In-ground installation

Model: OSUB8Part: OSUB8000

Landscape Subwoofers

Page 47: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

47

Suggested Landscape Systems

Satellites• LS44 (8 each)

Subwoofers• OSUB8 (2 each)

Amplifier• CDi1000 (OA DSP)

Satellites• LS44 (8 each)

Subwoofers• OSUB10 (2 each)

Amplifier• CDi1000 (OA DSP)

*Patent Pending

Satellites• LS64 (8 each)

Subwoofers• OSUB10 (2 each)

Amplifier• CDi1000 (OA DSP)

Satellites• LS64 (8 each)

Subwoofers• OSUB12 (2 each)

Amplifier• CDi1000 (OA DSP)

Mounts Sold Separately

+ +

Mounts Sold Separately

+ +

Mounts Sold Separately

+ +

Mounts Sold Separately

+ +

Landscape Audio Systems

Page 48: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

48

• Tree Mount

Model: LSTMPart: OLATM1000

• Surface Mount

Model: LSFMPart: OLAFM1000

Seasons Landscape MountsVarious mounting options for the Landscape speakers create a substantial level of flexibility when

designing an outdoor system. The large and small spikes can be driven into the ground in the lawn,

flowerbeds and planters where the speakers can be discreetly hidden by plants and shrubs. The Tree

Mount allows the speakers to be mounted above the ground on tree limbs or trunks. The surface

Mount can be secured to any flat surface such as decks, pilasters, hand rails, the sides of buildings

or under the eaves. The direction of the speakers can then be adjusted to focus the sound at the

listening area.

• Large Spike

Model: LSLSPart: OLALS1000

• Small Spike

Model: LSSSPart: OLASS1000

Landscape Accessories

Page 49: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

49

Seasons Landscape Amplifiers

A dedicated high-current amplifier delivering earth-shaking power drives this enclosure. This

amp resides with the source components remotely positioned so as to protect them from the

elements.

Seasons Amplifiers

The Crown CDi amplifiers are perfect for driving any of the Landscape Collection Satellites and

Subwoofers. Operating in either 8 ohm or 70v mode, both amplifiers delivers incredible and reli-

able power with onboard DSP.

Crown CDi Amplifiers

Model: CDi1000Crown by Harman

Model: CDi2000Crown by Harman

• Includes Origin Acoustics Seasons Landscape DSP Presets

• Accurate, uncolored sound with very low distortion for the best in music and voice reproduction

• Extremely versatile; rated for 2, 4, 8 ohm loads and 70V/100V and 140V outputs

• Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency over- loads and internal faults

• Intuitive front-panel LCD screen for quick, easy configuration

• Switch-mode universal power supply • Onboard digital signal processing includes

cross- overs, EQ filters, delay, and output limiting

• 2 Channels• Rated Power Output (per Channel @ 4 ohms):

CDi1000: 500 Watts per channel CDi2000: 800 Watts per channel

• Signal to Noise Ratio (below rated 1kHz power at 8 ohms) : 100 dB (A weighted)

• Total Harmonic Distortion: 0.5% • Dimension: (HxWxD) 3½” x 19” x 12.25”

*Patent Pending

Landscape Amplifiers

Page 50: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

50

The Acoustascape AS41 Hi-Fi Landscape Audio System brings

stunning surround sound to the backyard with four 4.5” cam-

ouflage enclosed satellite speakers and a bass-boosting 8” in-

ground subwoofer. The AS41 System projects perfectly even

sound coverage directly into the listening area with equal vol-

ume, turning the whole outdoor space into a sweet spot with-

out causing a disturbance to neighbors… All while remaining

completely hidden from sight in landscape foliage. Expand

the system with up to four AS4SAT speakers for coverage up to

2,500 square feet*.

Receiver AS41SYS AS4SAT AS4SAT

Page 51: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

51*Patent Pending

• 4.5” polypropylene woofer• 0.75” PEI dome tweeter• HDPE, non-corrosive sealed

enclosure• 8” dual voice coil polypropylene

woofer

• Weatherproof aluminum mushroom head

• 8-ohms per channel nominal• Frequency Response: 39Hz-20kHz

± 3dB

Satellites• AS4SAT(4 each)

Subwoofers• AS8SUB (1 each)

+

Model: AS41SYSPart: AS4100SYS

Satellites• AS4SAT (1 pair)

Model: AS4SATPart: AS4000SAT

• 4.5” polypropylene woofer• 0.75” PEI dome tweeter• HDPE, non-corrosive sealed

enclosure

• 6-ohm with 6 Sats• 4-ohm with 8 Sats• Frequency Response: 39Hz-20kHz

± 3dB• Must be used with AS41SYS

Origin Acoustics™ is a distributor of AcoustaScape™. All programs, discounts, and pro-motions for regular Origin Acoustics purchases do not apply to AcoustaScape.

Page 52: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

52

Taking entertainment outside is a balance of audible accuracy,

dispersion and power. The Seasons Outdoor Collection utilizes a unique

driver configuration in a triangular cabinet. The 60 Collection models

feature active woofers and tweeters firing forward and dual passive

radiators firing off the back two sides. This means substantial bass and

greater achievable volume levels to fill the yard, deck or pool area with

impressive sound. The collection is available in eight models including

two that deliver both stereo channels from a single enclosure.

Seasons Outdoor CollectionOutdoor Speakers

“Sonically the speakers sound great, producing real and noticeable bass...delivering wonderful clarity with vocals and instruments”

― John Sciacca, Residential Systems Magazine

Page 53: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

53

• 4x8” glass fiber woofer• Butyl rubber X-Wave™

surround• 4x8” dual passive radiators

• Aluminum dome tweeter• Adjustable woofer/tweeter

levels• WxHxD: 7” x 13” x 7”

• 4x8” IMG woofer• Butyl rubber X-Wave™

surround• 4x8” dual passive radiators

• Dual aluminum dome tweeters• Adjustable tweeter level• WxHxD: 7” x 13” x 7”

Seasons Outdoor Collection

*Patent Pending

Model:OS66B (Black)Part: OCS6600B

Model:OS66W (White)Part: OCS6600W

Model:OS64DTB (Black)Part: OCS6400DTB

Model:OS64DTW (White)Part: OCS6400DTW

Outdoor Speakers

Page 54: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

54

• 5.25” glass fiber woofer• Butyl rubber X-Wave™

surround• Dual passive radiators

• Aluminum dome tweeter• Adjustable woofer/tweeter

levels• WxHxD: 7” x 10½” x 7”

Seasons Outdoor Collection

Model:OS56B (Black)Part: OCS5600B

Model:OS56W (White)Part: OCS5600W

• 4x8” IMG woofer• Butyl rubber X-Wave™

surround• 4x8” dual passive radiators

• Aluminum dome tweeter• Adjustable tweeter level• WxHxD: 7” x 13” x 7”

Model:OS64B (Black)Part: OCS6400B

Model:OS64W (White)Part: OCS6400W

Outdoor Speakers

Page 55: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

55

• 5.25” IMG woofer• Butyl rubber X-Wave™

surround• Aluminum dome tweeter

• Adjustable tweeter level• WxHxD: 64�5” x 10½” x 71�10”

• 5.25” IMG woofer• Butyl rubber X-Wave™

surround• Dual aluminum dome tweeters

• Adjustable tweeter level• WxHxD: 7” x 10½” x 7”

Model:OS54DTB (Black)Part: OCS5400DTB

Model:OS54DTW (White)Part: OCS5400DTW

Model:OS54B (Black)Part: OCS5400B

Model:OS54W (White)Part: OCS5400W

*Patent Pending

Seasons Outdoor CollectionOutdoor Speakers

Page 56: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

56

Great sound and durability are the hallmarks of Origin amplifiers. When designing a system,

regardless of its size or complexity, amplification is a critical tool that needs to perform all the time,

every time. These amplifiers resoundingly answer the call.

Our Class-D switching type amplifiers have incredible efficiency, above 90%, as higher power is

demanded. This means substantially less heat is produced even though the amplifier is able to

produce substantial power. This also means a reduction in size as smaller heat sinks are required

and the electronic circuitry can be more compact and reside in a smaller chassis.

ElectronicsElectronics

Page 57: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

57

ElectronicsAn amplifier should be transparent, it should literally be just wire with gain. At Origin we pride

ourselves in offering no-compromise amplifiers to drive our loudspeakers. Whether you require a

stereo or multi-channel version, our amplifiers feature high-efficiency, Class-D power that is built

to last and will reproduce every nuance of every recording.

• Two Channel, Stereo Amplifier• 150 watts of Class D power per channel• Bridgeable outputs• Signal sensing turn-on• 12-volt trigger• Thermal protection• Short circuit protection• 2U rack mountable• Mounting plates included

Model: A2150Part: AMP02X15000

• 12 independent channels• Global and individual inputs• 50 watts of class-D power per channel• Bridgeable outputs• Signal sensing turn-on• 12-volt trigger• Thermal protection• Short circuit protection• 2U rack mountable• Mounting plates included

Model: A1250Part: AMP12X5000

*Patent Pending

Amplifiers

Page 58: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

58

Electronics

• Single channel, subwoofer amplifier• 150 watts of class D power• Adjustable low-pass crossover• Front mounted volume control• Signal sensing auto on/o• Subsonic Filter• Compact 1U design

Model: SUBA150Part: AMPSUB1X150

• Single channel, subwoofer amplifier• 500 watts of class D power• User adjustable presets• Remote Control• 10-band equalization• Front-mounted volume control• Signal sensing auto on/o• Low-pass crossover• Compact 1U design

Model: SUBA500Part: AMPSUB1X500

Subwoofer Amplifiers

Page 59: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

59*Patent Pending

Electronics

• Individually switches on/off of up to 4 pairs of speakers• Connect and safely control multiple speaker pairs with

one amplifier.• Automatic impedance protection circuitry engages

without the need for user involvement.• Individual room on/off pushbuttons.• Heavy-duty screw-type connectors, capable of

accepting up to 12 AWG wire, provide positive hookup to input and output wires.

Model: SL4Part: AC4SEL1000

• Individually switches on/off of up to 6 pairs of speakers• Connect and safely control multiple speaker pairs with

one amplifier.• Automatic impedance protection circuitry engages

without the need for user involvement.• Individual room on/off pushbuttons.• Heavy-duty screw-type connectors, capable of

accepting up to 12 AWG wire, provide positive hookup to input and output wires.

Model: SL6Part: AC6SEL1000

• Individually switches on/off of up to 6 pairs of speakers• Allows for individual adjustment of volume levels of up

to 6 pairs of speakers• Connect and safely control multiple speaker pairs with

one amplifier.• Automatic impedance protection circuitry engages

without the need for user involvement.• Individual room on/off pushbuttons.• Heavy-duty screw-type connectors, capable of

accepting up to 12 AWG wire, provide positive hookup to input and output wires.

Model: DS6VCPart: AC6VC10000

Speaker Selectors

Page 60: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

60

Electronics

• Connects up to 8 pairs of speakers to a single amplifier

• Standard Phoenix connectors• Compact design

• Each speaker pair connection requires impedance matching volume control

Model: ADC8Part: ADC8000

• Impedance matching Slider volume control

• 70-100 watts

• Includes white, almond and bone faceplates

Model: VS100Part: ACVCO1000

• Impedance matching Rotary Weatherproof outdoor volume control

• 70-100 watts • Only available in gray

Model: OV100Part: ACOVC1000

• Impedance matching Rotary volume control

• 30-50 watts

• Includes white, almond and bone faceplates

Model: VI50Part: ACVC50000

• Impedance matching Rotary volume control

• 70-100 watts

• Includes white, almond and bone faceplates

Model: VI100Part: ACVC100000

• Rotary 70 Volt Volume Control • Includes white, almond and bone faceplates

Model: V70VPart: AC70VC10000

Volume Controls

Page 61: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

61*Patent Pending

Origin Acoustics loudspeakers are designed to be mounted in any

room in any home. Typically the stud bay or ceiling construction is

all that is necessary to mount the speakers and provide the proper

acoustic platform. However sometimes the installation may require

specific enclosures to assure proper air volume behind the speaker

or to limit sound transference into an adjoining room. Sometimes

a state or local ordinance may require a metal enclosure in certain

buildings. Origin Metal Sound Enclosures were designed to meet

or exceed One-hour Fire Rating requirements and contain fire, gas,

smoke and heat within the enclosure for up to one hour.

New construction brackets make the final install very fast and effi-

cient. Brackets for all Origin in-wall and in-ceiling speakers are avail-

able. Make sure to confirm the model number correctly correlates

to the brackets you are ordering.

Installation AccessoriesInstallation Accessories

Page 62: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

62

Face Plate: 18x17¾” (457x450mm)Box: 10½x14x7½”(265x356x188mm)

• D108• D106• D104

Model: FB10Part: FBXD10000R

Face Plate: 18x17¾” (457x450mm)Box: 10x14x7½” (254x356x188mm)Back box (2x8 construction) for:

• D80 Collection (all)• D60 Collection (all)• ThinFit Collection (all)

Model:FBD82X8Part: FBXC6800R

Face Plate: 18x17¾” (457x450mm)Box: 10x14x5¾” (254x356x146mm)Back box (2x6 construction) for:

• D82• D82DT/SUR• D60 Collection (all)• ThinFit Collection (all)

Model: FBD82X6Part: FBXD68000R

Face Plate: 18x17¾” (457x450mm)Box: 10x14x5¾” (254x356x146mm)Back box for:

• P60• P60DT• P61

Model: FBP6Part: FBPX6010R

Face Plate: 18x18” (457x457mm)Box: 14x14x3½” (356x356x189mm)Back box for:

• LCR38• LCR36

Model: FB10SPart: FBXL1000

Face Plate: 18x17¾” (457x450mm)Box: 10x14x7½” (254x356x188mm)Back box for:

• P80• P80DT

Model: FBP8Part: FBPX8010R

Face Plate: 18x18” (457x457mm)Box: 14x14x3½” (356x356x189mm)Back box for:

• C68• C66• C64• C62

Model: FB12SPart: FBXC1200

Face Plate: 18x18” (457x457mm)Box: 142⁄5x14x3½” (365x356x189mm)Back box for:

• LCR68• LCR66• LCR64

Model: FB15SPart: FBXL1500

Installation AccessoriesSound Enclosures

Page 63: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

63*Patent Pending

Bracket for:• D108• D106• D104

Model: BR10Part: BRK1000N

Installation Accessories

Bracket for:• D80 Collection (all)• D60 Collection (all)• ThinFit Collection (all)

Model: BR68Part: BRK800N

Bracket for:• D30 Collection (all)

Model: BR3Part: BRK300N

Bracket for:• P80• P80DT

Model: BRP8Part: BRK810N

Bracket for:• P60• P60DT• P61

Model: BRP6Part: BRK610N

Bracket for:• THTR68• THTR66

Model: BRL30Part: BRKL3000N

Bracket for:• LCR68• LCR66• LCR64

Model: BRL15Part: BRKL1500

Bracket for:• LCR38• LCR36

Model: BRL10Part: BRKL1000N

Bracket for:• C68• C66• C64

Model: BRL12Part: BRKL1200N

New Construction Brackets

Page 64: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

64

Installation AccessoriesInstalling the speaker in advance of painting the drywall is a common practice. In order to protect

the speaker’s internal components the reusable paint shields are an excellent investment. They are

made of injection molded plastic with metal on the edges that are secured by the magnets on the

mounting rings. Simply place them over the speaker and whether the paint is sprayed or rolled it will

allow it to flow up to the very edge of the speakers. The shields are then removed and replaced with

the perforated grilles creating a discreet finished appearance.

Paint Shield for:• D108• D106• D104

Model: DPS10Part: MISD10000

Paint Shield for:• P80• P80DT

Model: PPS8Part: MISP8000

Paint Shield for:• D80 Collection (all)• D60 Collection (all)• ThinFit Collection (all)

Model: DPS68Part: MISD6800

Paint Shield for:• P60• P60DT• P61

Model: PPS6Part: MISP6000

Paint Shield for:• C68• C66• C64• C62

Model: CPS6Part: MISC1200

Paint Shield for:• LCR68• LCR66• LCR64

Model: LPS6Part: MISC1500

Paint Shield for:• LCR38• LCR36

Model: LPS3Part: MISC3600

Paint Shields

Page 65: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

65

Installation AccessoriesDesigned to give the Origin Acoustics’ Producer and Director Collections that square, precise mod-

ern look, these replacement grilles fit onto and in the exact location of the standard round grilles.

Square Grille for:• D108• D106• D104

Model: SQ10Part: GR10000S

Zip-Clip Ring w/ Rail and Zip-Clip for:

• D80 Collection (all)• D60 Collection (all)

Model: BZ68Part: MISDZ8600

Square Grille for:• D80 Collection (all)• D60 Collection (all)• ThinFit Collection (all)

Model: SQ68Part: GRD68000S

Square Grille for:• P80• P80DT

Model: SQ8PPart: GRP810S

Zip-Clip Ring w/ Rail and Zip-Clip for:

• D100 Collection (all)

Model: BZ10Part: MISDZ1000

Square Grille for:• P60• P60DT• P61

Model: SQ6PPart: GRP610S

*Patent Pending

Grilles

Page 66: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

66

The FoundersIn 2012 the three prior CEO’s of SpeakerCraft Ken, Ed and Jeremy started inventing together again.

The three partners have reunited under the all too appropriate moniker, Origin Acoustics. Yes, the

originals are back. They have returned to invent and create the worlds best sounding loudspeakers.

Bringing an aggregate of over 100 years of experience to this effort, they are designing, developing

and innovating new products and technologies that are sure to set the industry standard once again.

He started his career as a custom installer, and then became a successful AV independent retailer where he

learned deficiencies in products and installation practices that drove him to design innovative and timesav-

ing products, and dealer programs that revolutionized the custom installation industry. He and his business

partners founded, developed and grew SpeakerCraft into the industry’s largest architectural speaker manufac-

turer and brand. For over two decades Jeremy has actively contributed in the growth and development of the

residential architectural custom electronics industry. He served on the Board of Directors for CEDIA (Custom

Electronic Design & Installation Assoc.) and regularly contributes articles and lectures to a variety of industry

trade publications and educational events worldwide.

Jeremy Burkhardt CEO

Co-Inventing the in-wall speaker with his high school buddy Ken Humphreys in 1976, Ed has been responsible

for many inventions and patents throughout his exuberant career in the speaker industry. After Ken left the orig-

inal SpeakerCraft in 1989, Ed continued to run the company and eventually hired on a fervent young man by the

name of Jeremy Burkhardt. In 1993, Ed and Jeremy went on to launch the largest custom installation speaker

company the world has ever seen. A true pioneer of the custom installation speaker business, Ed has over 10

active patents on some of the most innovative speaker technologies. When not innovating new products, Ed

loves to be almost anywhere in nature hiking, biking or playing golf and tennis.

Ed Haase COO

Also known as the inventor of the in-wall speaker, Ken started SpeakerCraft after college with his high school

buddy Ed Haase back in 1976. They started out putting speakers into RV’s and manufactured speakers for Bang

& Olufsen, Niles, Polk, Sonance, and more. Ken left SpeakerCraft in 1989 to concentrate on his family up until

the kids didn’t want him around so much. He started his own small retail speaker shop in 1996. Responsible

for many of the cutting edge patents of Origin speakers, nobody has as much experience in innovating archi-

tectural speakers as Ken. When he’s not working around the clock to make sure Origin’s products exceed the

expectations of audiophiles, you can find Ken enjoying himself a nice cold craft brew.

Ken Humphreys CTO

Page 67: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

67

Before coming on board at Origin, Susane was with SpeakerCraft for 18 years, and even worked the counter at the original store. She is

the OG of OA! Her family is #1 and she loves spending time in the great outdoors. Interesting fact, Susane owns a 2013 Dodge Charger

that has won three awards from various car shows!

Susane Milliken Customer Service Manager

Jeanne brings over 25 years of accounting experience with 10 years at SpeakerCraft to the Origin team. She either has her toes in the

sand, daiquiri in hand, or is planning new travel adventures and spending time with her grandkids. She enjoys listening to jazz, funk,

and alternative music through Origin’s bumpin’ speakers while reconciling accounts and approving credit applications.

Jeanne Avila Credit Manager

The mastermind behind the fascinating designs found uniquely in Origin Acoustics speakers and Origin Design Services, Tyler dropped

out from the nuclear engineering program at Oregon State University to bring Origin’s vision to life. Outside of his commitments to

work, he is a devout gamer.

Tyler Humphreys Product Design Engineer

A retired musician, mathlete, and makeup artist, Taylor holds a degree in Economics and Chinese and played a key role in developing

technology to support America’s largest single-family home renovation project. He joined Origin Acoustics to serve as a jack of multi-

ple trades. He is an avid guitar player, music collector, distance runner, software developer, and clumsy outdoorsman.

Taylor Nichols Marketing Manager

As a manufacturing guru, Mike has spent 13 years in the audio video industry with 10 of those years in new speaker development and

vendor relations. Mike enjoys spending time with his wife and kids, mountain biking, camping, soccer, fishing and all things outdoors.

He is a serious music enthusiast, collecting and listening to music on his constantly improving Audio/Video system.

Mike Hopkins Product Development Manager

The Origin Family

Relentlessly diligent and crafty in a multitude of areas, Nick spent four years at SpeakerCraft as Director of Marketing & Sales before

obtaining his MBA from UNLV and working as Director of Sales at Soundcast. He has crafted all of our awesome dealer programs to

make us your best partner in the industry. On the weekends, you can find Nick enjoying outdoor activities with his wife and daughters.

Nick Berry Executive Vice President

With a voluminous past, Marc has almost done it all by owning a landscaping company, cross country 4x4 adventures, working for a

carnival, building houses & theaters, and opening a Pro AV rental house. Marc brings over 15 years of audio experience and expertise

to Origin. He is a family man who loves to stay active by mountain biking, being a Spartan athlete, and a handyman of all projects.

Marc Fisher Vice President of Sales

Page 68: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

68

Model TF36 TF34 TF64DTMSRP $340/ea $290/ea $230/ea

Model D60 D38MSRP $960/6-pack $370/ea

Model D66 D64 D62 DT/SUR D62 D60 DTMSRP $365/ea $290/ea $375/ea $230/ea $290/ea

Model D84 D82 DT/SUR D82 D80 D68MSRP $490/ea $575/ea $345/ea $1,380/6-pack $625/ea

Model D108 D106 D104 D88 D86MSRP $1,600/ea $1,300/ea $1,035/ea $1,250/ea $725/ea

Innovations

Model P80DT P80 P61 P60DT P60MSRP $285/ea $340/pair $285/pair $170/ea $230/pair

Page 69: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

69

Model OS66 OS64DT OS64 OS56 OS54DT OS54MSRP $360/ea $490/ea $300/ea $235/ea $365/ea $200/ea

Model CSUB10N CSUB10NCE CSUB10R DSUB6F3 DSUB6F68MSRP $800/ea $900/ea $1,400/ea $1,000/ea $1,050/ea

Model SUB12 SUB10 SUB8 SUBV10 AS41SYS AS4SATMSRP $1,225/ea $890/ea $615/ea $525/ea $1,700/ea $400/pair

Model LS64 LS44 OSUB12 OSUB10 OSUB8MSRP $575/ea $300/ea $2,550/ea $1,875/ea $1,275/ea

Model LCR38 LCR36 C68 C66 C64 C62MSRP $400/ea $260/ea $625/ea $365/ea $300/ea $230/ea

Model THTR68 THTR66 LCR68 LCR66 LCR64MSRP $1,800/ea $1,400/ea $800/ea $550/ea $375/ea

*Patent Pending

Innovations

Page 70: THE BOOK · 4 1994 Offered the first lifetime warranty for architectural speakers. 1994 Introduced SpeakerCraft as its own brand. 1993 Designed first dual voice coil woofers designed

Mission Inn Rotunda | 3649 Mission Ave, 1st Floor | Riverside CA 92501 | 844.674.4461 | OriginAcoustics.com