X

1

Thank you for your purchase. In order to make you more comfortable by using the product, please read this user manual carefully and keep it for future reference.

www.dixix.com

2

Connectingplug

Adaptor

Short comb

Main body unit

Indicated light

Slide on/off switch

Clipper bladeClipper head

Connecting jack

Blade cover

Medium combLong comb

3

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.Children should be supervised to ensure that they do not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.The appliance is only to be used with the power supply unit provided with the appliance, it

4

must only be supplied at safety extra low voltage corresponding to the marking on the appliance.- the battery must be removed from the appliance before it is scrapped;- the appliance must be disconnected from the supply mains when removing the battery;- the battery is to be disposed of safely.WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.

5

Note:n Do not immerse the product into water.n Do not use the product during bathing or showering.n Do not use water to rinse the product.n The product cannot be cleaned by dishwasher.n Do not place the product in a humidity area, ensure that the skin is dry condition during use.n The clipper blade is extremely sharp, to prevent injuries, ensure that the blade does not touch the skin at all times during use.n If the product or any other

6

part is damaged, do not re-use it. Otherwise, it may cause harm to human body.n When the product is not used, keep the product at safety place to avoid dust buildup inside the product.n Make sure that the supply voltage corresponds with the voltage marked on the rating label of the adaptor.n During product cleaning, ensure to turn off the power and remover the adaptor. Do not wrap the cord around the appliance.n Do not use the product at wound or inflammatory area, and allergic skin.

7

n Do not make any alteration to the product, or give it to unofficial professional people to do maintenance.

8

Charging process

1. Before using the product at the first time, the battery must be fully charged, which will take about 14 hours.

2. With a fully charged battery, the product can be operated for around 60 minutes. If you experience a considerable decrease in trimming performance, switch off the product and recharge the battery.

Firstly, slide down the "On/Off" switch button of the clipper to turn off the power of the product. Insert the connecting plug of the adaptor into the corresponding jack located at the bottom of the product. Insert the adaptor into a suitable wall socket.

• Once the charging process is completed, always remove the adaptor from the wall socket first before disconnecting the jack from the product.

• The transformer within the adaptor will become warm while charging. This is normal and safety, and does not indicate a malfunction of any kind.

9

• Insert the adaptor into a suitable wall socket. The charging process begins automatically. The red charge indicator at the lower side remains lit as long as the product is connected to the mains.

• If the product has not been used for a long period, the capacity of the battery may decrease by a certain amount. However, full capacity will be restored after several charge/discharge cycles.

Usage

1. Changing the clipper head

• The blade can be removed and detached from the clipper by pressing out at the front of blade head.

• To reattach the blade, put back the blade head onto the clipper, and press at the back of blade head until it has reengaged.

Note:

To remove or reattach the blade, make sure to turn off the clipper and the adaptor has been disconnected from wall socket.

10

2. Fitting the push-on comb

• The product is provided with three kinds of comb attachments, it allows to cut at different kinds of length.

• The short comb is at 3mm, the medium comb is from 3 to 21mm, and the long comb is from 24 to 39 mm.

• There are two comb tracks, located at both sides of the clipper, to fix the comb setting.

• Align both comb rails with comb track on both sides of the clipper, and slide into place with "click" sound.

11

• To adjust comb height by press down on the comb adjustment button and slide down as necessary.

• Remove the comb by pressing down on the comb adjustment button and slide up.

Remark:

Please make sure the power of clipper is turned off during comb adjustment.

3. Hair clipper operation

• Slide up the "On/Off" switch button to turn on the power of the clipper for hair cutting.

• After finishing the hair cutting, slide down the switch in turning off the power.

12

• Put back the blade cover and unplug the power cord from the power supply.

• Clean the hair clipper (refer to cleaning and maintenance section).

Note:

• Do not use the clipper for longer than 20 minutes continuously as the blades may get hot.

• If the blades get hot, please stop to use it. Allow the blades to get cool before next use, in order to keep comfortable cutting practice.

• Keep the skin clean and tidy before using the product. Do not smear cream, lotion, gel, powder or antiperspirant etc. to avoid blocking of blade or malfunction.

• Please stop using the product if feeling uncomfortable during use.

13

Clean and Maintenance

• It is essential to switch off the product, and remove the adaptor from the wall socket before cleaning and maintenance.

• To avoid the risk of electric shock, the product and the adaptor must not be allowed to contact with liquid.

• Do not use compressed air, steel wire brush, abrasive cleaning agent or corrosive liquid to clean the product.

• In order to keep comfortable cutting practice, do cleaning and maintenance after using the product.

• Ensure a better cutting performance, do clean and maintenance the product regularly.

• This product is not waterproof except the blade, please do not use water to rinse the product.

• The clipper comb and blade cover shall be removed from the product before cleaning.

1. Turn off the power, and remove blade cover.

2. Detach the clipper head from the main body.

3. Use brush to clean and remove the hair residues on the blade.

14

4. The detached blade can be washed under the tap or water.

5. Remove excess water after cleaning. Keep the blade to be opened and let it dry completely.

6. After the blade is completely dry, install the blade back to the main body and store the product in dry place.

Note:

• Do not use towel or paper towel to wipe the clipper blade, it may damage the blade and the connecting shaft.

• During the fitting or removing of blade head, ensure the adaptor has been disconnected from wall socket.

• Do not use hairdryer or heater to dry the product, it may make the product to be deformation and mechanical failure.

• Do not place the product at sunlight or high temperature directly.

15

Important:

n Blade must be cleaned and oiled on a regular basis for proper functioning. Failure to regularly clean and oil the blade will void the warranty.

Environmental protection

• This product contains a rechargeable battery pack, ensure to remove the battery before disposal, or put the product into recycle point instructed by the government.

• In order to protect the environment, when the product life time is end, do not waste the product with other household rubbish. Put it into recycle point instructed by the government.

16

Warranty

Defects affecting product functionality appearing within the guarantee period will be corrected by replacement or repair at our option, provided the product is used and maintained in accordance with the instructions.

Warranty service provided at part or entire product repair or replacement, it will be terminated up to the end of warranty period.

Defects from repair by an unauthorized dealer are not covered.

Guarantee period is 2 years from first retail purchase.

To get maintenance or repairing service, please bring the product with purchased invoice, and contact local or closer distributor or service station.

Contains a listed adaptor.

Hair Clipper

Model: HC966

www.dixix.com

Manufacturer: DIXIX INTERNATIONAL LTD.

X

HC966HAIR CLIPPER

C44-0966170425ARO004