MANUFACTURING

Texas Manufacturing WeldingTexas Student Edition (Print) with eText ©2017, NCCER

Develop the knowledge, skills, and technologies required for employment in metal technology systems

Welding contains selected modules designed by highly qualified subject matter experts, and was compiled in accordance with the Texas State Board of Education’s curricula requirements. It consists of full-color modules from various NCCER programs that include critical theoretical and practical skills for a career in the trades. Students will reinforce, apply, and transfer knowledge and skills to a variety of settings and problems. Knowledge about career opportunities, requirements, and expectations and the development of workplace skills prepare students for future success.

Chapter features provide a strong foundation to get started in the trade

• Learning objectives, Performance Tasks, and Trade Terms are found at the beginning of each module.

• Color illustrations and photographs are used throughout the text to highlight important concepts and help clarify complex instructions.

• Special Features provide a head start for those entering the field by presenting technical tips and professional practices from operators in various disciplines.

Program Resources• Student Edition (print)

• Student Edition eText

• Teacher’s Edition (print) which contains an instructor’s copy of the student edition as well as lesson plans for each module, written examination/performance profile sheet, and answer keys.

MANUFACTURING

Chapter features provide a strong foundation to get started in the trade continued

• Going Green looks at ways to preserve the environment, save energy, and make good choices regarding the health of the planet.

• Did You Know features offer hints, tips, and other helpful information from the trade.

• Step-by-step instructions guide students through technical procedures and tasks.

• Each module presents a list of Trade Terms that are discussed within the text and defined at the end of each module.

• Review Questions at the end of each module are provided to reinforce the knowledge students have gained.

Strong teaching and learning support for Texas• One-click navigation to TEKS aligned content. Find 24/7 access to the Digital eText and quickly

jump from the Texas Essential Knowledge and Skills standards (TEKS directly to the content in the eText that fulfills that standard.

• A printed Teacher Edition contains an instructor’s copy of the student edition as well as lesson plans for each module, written Examination/Performance Profile Sheet, and answer keys.

Table of ContentsModule 1: 00107-15 Basic Communication SkillsModule 2: 00108-15 Basic Employability SkillsModule 3: 46101-11 Fundamentals of Crew

LeadershipModule 4: 00101-15 Basic Safety (Construction Site

Safety Orientation) Module 5: 29101-15 Welding SafetyModule 6: 00102-15 Introduction to Construction

MathModule 7: 00105-15 Introduction to Construction

DrawingsModule 8: 29107-15 SMAW – Equipment and SetupModule 9: 29205-15 GMAW and FCAW – Equipment

and Filler MetalsModule 10: 29207-15 GTAW – Equipment and Filler

MetalsModule 11: 29110-15 Joint Fit-Up and AlignmentModule 12: 29201-15 Welding SymbolsModule 13: 29202-15 Reading Welding Detail

Drawings

Learn More!Contact your Pearson Texas Account General Manager or visit:

TryPearsonTexas.com/cte

PearsonSchool.com800-848-9500Copyright Pearson Education, Inc., or its affiliates. All rights reserved.SAM: 9780328942442