Testing Machines Inc.Testing Machines Inc.Ronkonkoma, New York Ronkonkoma, New York

LawsonLawson--HemphillHemphillSwansea, MassachusettsSwansea, Massachusetts

Messmer Instruments, Ltd.Messmer Instruments, Ltd.Kent, United KingdomKent, United Kingdom

BBüüchel BVchel BVVeenendaal, NetherlandsVeenendaal, Netherlands

Lako Tool & Manufacturing, Inc.Lako Tool & Manufacturing, Inc.Perrysburg, OhioPerrysburg, Ohio

Adamel Lhomargy SASAdamel Lhomargy SASRoissy en Brie, FranceRoissy en Brie, France

TMI CanadaTMI CanadaPoint Claire Point Claire -- Dorval, QuebecDorval, Quebec

TESTING MACHINES INCORPORATED (TMI)TESTING MACHINES INCORPORATED (TMI)

PHYSICAL PROPERTY TESTING INSTRUMENTS PHYSICAL PROPERTY TESTING INSTRUMENTS FOR THE FOLLOWING INDUSTRIES:FOR THE FOLLOWING INDUSTRIES:•• PAPERPAPER•• PULPPULP•• FILMFILM•• FOILFOIL•• INKINK•• COATINGSCOATINGS•• NONWOVENNONWOVEN•• TEXTILETEXTILE•• CORRUGATED CORRUGATED

LAKO TOOL & MFGLAKO TOOL & MFGBRIEF HISTORY & COMPANY OBJECTIVESBRIEF HISTORY & COMPANY OBJECTIVES•• OVER 30 YEARS OF EXPERIENCEOVER 30 YEARS OF EXPERIENCE

•• PROVIDING SEALING CUTTING & PUNCHING SOLUTIONSPROVIDING SEALING CUTTING & PUNCHING SOLUTIONS

•• LEADING MANUFACTURER OF REPLACEMENT SEAL JAWSLEADING MANUFACTURER OF REPLACEMENT SEAL JAWS

•• PURPOSE TO DESIGN TOOLING TO IMPROVE PACKAGE QUALITYPURPOSE TO DESIGN TOOLING TO IMPROVE PACKAGE QUALITY

•• REDUCE COSTS FOR CUSTOMERSREDUCE COSTS FOR CUSTOMERS

•• NUMBER OF PATENTED PRODUCTSNUMBER OF PATENTED PRODUCTS

PATENTED PRODUCTSPATENTED PRODUCTSHOT CHAMBER PUNCH (HCP)HOT CHAMBER PUNCH (HCP)

•• WIDELY USED IN INDUSTRYWIDELY USED IN INDUSTRY

•• USED TO PRODUCE STRONG HOLES IN USED TO PRODUCE STRONG HOLES IN

POLYPROPYLENE FILMSPOLYPROPYLENE FILMS

•• USED IN VERTICAL SEALING APPLICATIONSUSED IN VERTICAL SEALING APPLICATIONS

•• MELTS HOLE WHILE SEALING AND ANNEALINGMELTS HOLE WHILE SEALING AND ANNEALING

•• SUPPORTS THE USE OF REDUCED COST LIGHTER SUPPORTS THE USE OF REDUCED COST LIGHTER

GAUGE FILMSGAUGE FILMS

PATENTED PRODUCTSPATENTED PRODUCTS

POLYMER SEALING DEVICE (PSD)POLYMER SEALING DEVICE (PSD)

•• DEDICATED TO COLD SEAL APPLICATIONSDEDICATED TO COLD SEAL APPLICATIONS

•• FLEXIBLE SEAL INSERTS ELIMINATE SCRAPFLEXIBLE SEAL INSERTS ELIMINATE SCRAP

•• CONFORM TO FILM IRREGULARITIESCONFORM TO FILM IRREGULARITIES

•• ELIMINATES END SEAL FRACTURESELIMINATES END SEAL FRACTURES

•• SEALS THROUGH FILM WRINKLESSEALS THROUGH FILM WRINKLES

•• RESULTS IN FRESHER PRODUCTRESULTS IN FRESHER PRODUCT

•• YEILDS LONGER SHELFYEILDS LONGER SHELF--LIFELIFE

•• REDUCES COST AND INCREASES MANUFACTURER REDUCES COST AND INCREASES MANUFACTURER

PROFITSPROFITS

PATENT PENDINGPATENT PENDINGMODULAR SEALING DEVICE (MSD)MODULAR SEALING DEVICE (MSD)

•• LATEST DESIGN TO SUPPORT MAINTENANCE PERSONNELLATEST DESIGN TO SUPPORT MAINTENANCE PERSONNEL

•• FIXED BASE FACILITATES EASY CHANGE OUTFIXED BASE FACILITATES EASY CHANGE OUT

•• EASY ACCESS TO FAILED HEATING ELEMENTSEASY ACCESS TO FAILED HEATING ELEMENTS

•• QUICK CHANGE OF SEAL INSERTSQUICK CHANGE OF SEAL INSERTS

•• MSD BASE SUPPORTS HOLE PUNCH OR STANDARD INSERTS MSD BASE SUPPORTS HOLE PUNCH OR STANDARD INSERTS

PATENTED PRODUCTSPATENTED PRODUCTSTHE THE ““BOWBOW”” DESIGN SEAL SURFACEDESIGN SEAL SURFACE

•• USE IN HEAT & COLD SEAL APPLICATIONSUSE IN HEAT & COLD SEAL APPLICATIONS

•• CAN BE USED WITH CAN BE USED WITH ““MSDMSD”” JAWS TO REDUCE DOWNJAWS TO REDUCE DOWN--TIMETIME

•• EASY CHANGE FROM HOT TO COLD SEALINGEASY CHANGE FROM HOT TO COLD SEALING

•• MORE FORGIVING THAN UNDERCUT SEAL SURFACESMORE FORGIVING THAN UNDERCUT SEAL SURFACES

•• GREATER TOLARANCES ALLOW SEALING WITH FIN LENGTH VARIANCESGREATER TOLARANCES ALLOW SEALING WITH FIN LENGTH VARIANCES

•• ALSO SEALS WHEN PACKAGES DO NOT TRACK CORRECTLYALSO SEALS WHEN PACKAGES DO NOT TRACK CORRECTLY

MODULAR HEAD ASSEMBLIESMODULAR HEAD ASSEMBLIES AND OTHER TOOLINGAND OTHER TOOLING

SL & TS SERIES SEALERSSL & TS SERIES SEALERS

SL10 SL10 –– HOT TACK TESTERHOT TACK TESTERSEAL TESTERSEAL TESTER

SL2 SL2 –– DIGITAL CONTROLDIGITAL CONTROLHEAT SEALERHEAT SEALER

SL5 SL5 –– PLC CONTROLLEDPLC CONTROLLEDHEAT SEALERHEAT SEALER

TS4 TS4 –– DIGITAL CONTROLDIGITAL CONTROLHEAT SEALERHEAT SEALER

TS12 TS12 –– DIGITAL CONTROLDIGITAL CONTROLHEAT SEALERHEAT SEALER

TSTS--4 DIGITAL HEAT SEALER4 DIGITAL HEAT SEALER

PRECISION DUALPRECISION DUAL--BEAM BEAM LOAD CELLLOAD CELL

(5(5--point accredited calibration)point accredited calibration)

INDEPENDENT UPPER INDEPENDENT UPPER AND LOWER SEAL AND LOWER SEAL TEMPERATURESTEMPERATURES

44”” LENGTH OF SEALLENGTH OF SEAL

DIGITAL SEAL PRESSURE DIGITAL SEAL PRESSURE OUTPUT DISPLAY OUTPUT DISPLAY (5(5--point accredited calibration)point accredited calibration)

PRESSURE REGULATORPRESSURE REGULATOR

DWELL TIMERDWELL TIMERSWITCH SELECTABLE DUAL SWITCH SELECTABLE DUAL PRESSURE SET POINT FOR PRESSURE SET POINT FOR TIMER ACTIVATIONTIMER ACTIVATION

(NOT SHOWN ON PROTOTYPE (NOT SHOWN ON PROTOTYPE MACHINE PICTURE)MACHINE PICTURE)

TSTS--4 DIGITAL HEAT SEALER4 DIGITAL HEAT SEALERTSTS--4 HEAT SEALER STANDARD FEATURES4 HEAT SEALER STANDARD FEATURES•• SWITCH SELECTABLE DUAL PRESSURE SET POINTS SWITCH SELECTABLE DUAL PRESSURE SET POINTS

FOR TIMER ACTIVATIONFOR TIMER ACTIVATION

•• PRECISION LOAD CELL SYSTEMPRECISION LOAD CELL SYSTEM

•• 55--POINT ACCREDITED CALIBRATIONPOINT ACCREDITED CALIBRATION

•• MEASURES & DISPLAYS TOTAL FORCEMEASURES & DISPLAYS TOTAL FORCE

•• INTEGRATED DIGITAL ELECTRONIC CONTROLLERINTEGRATED DIGITAL ELECTRONIC CONTROLLER

•• DISPLAYS SEALING FORCEDISPLAYS SEALING FORCE

•• LOAD TARE FUNCTIONALITYLOAD TARE FUNCTIONALITY

•• 55--POINT ACCREDITED CALIBRATIONPOINT ACCREDITED CALIBRATION

•• SEAL LENGTHSEAL LENGTH

•• ONLY 4ONLY 4”” SEAL JAW LENGTHSEAL JAW LENGTH

•• 11”” WIDE SAMPLE LOADING TRAY WIDE SAMPLE LOADING TRAY

•• MACHINE WEIGHTMACHINE WEIGHT

•• ONLY 45 LBSONLY 45 LBS

•• DIMENSIONS 10DIMENSIONS 10”” X 12X 12”” X 21.5X 21.5””

CUSTOMIZATION AVAILABLE!!CUSTOMIZATION AVAILABLE!!

TSTS--4 DIGITAL HEAT SEALER4 DIGITAL HEAT SEALERTSTS--4 HEAT SEALER SETUP PARAMETERS4 HEAT SEALER SETUP PARAMETERS•• SEAL TEMPERATURESEAL TEMPERATURE

•• WIRING OF THE CONTROLLERS REDUCES WIRING OF THE CONTROLLERS REDUCES TEMPERATURE INPUT ERRORTEMPERATURE INPUT ERROR

•• FOOTSWITCH ENSURES ACCURACYFOOTSWITCH ENSURES ACCURACY

•• DWELL TIMEDWELL TIME

•• DIGITALLY CONTROLLEDDIGITALLY CONTROLLED

•• STARTS ONCE PRESSURE SET POINT IS STARTS ONCE PRESSURE SET POINT IS METMET

•• PRESSUREPRESSURE

•• DIGITAL OUTPUT DISPLAYDIGITAL OUTPUT DISPLAY

THANK YOU!THANK YOU!PLEASE VISIT OUR TABLETOP DISPLAY.PLEASE VISIT OUR TABLETOP DISPLAY.