testing laboratory iso/iec 17025; 2005 accreditation no ... · pdf filedepartment: testing...

54
002 Accreditation No. ISO/IEC 17025; 2005 ISO/IEC 17025; 2005 ISO/IEC 17020; 2012 Testing Laboratory Calibration Laboratory Inspection Activity-Type A Department: ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืž ื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—The certificate attached is an integral part of the schedule and is numbered identically Date of issue 24.07.2017 Version No. 7 Page No. 1 of: 54 Name and Address: Isotop ltd. 20 Hayarok St. Industrial Zone, Kanot, Israel Laboratory name Address +972-8-869-7200 Phone +972-8-869-7007 Fax [email protected]; [email protected] E-Mail www.isotop.co.il Web Site As declared by the organization, following is a list of the permanent sites and the phones numbers at which accredited activities are preformed. P Main: Kanot Definitions: Main site: A central site where the quality system is controlled for all sites where tests, calibrations or sampling are preformed. Permanent site (Branch): Permanent or temporary site existing longer than 6 months where at, or from which, the activities part of the accreditation schedule are preformed. P1 Nazareth illit +972-4-657-5380 P6 Beer Sheva +972-8-628-0193 P2 Kiryat Bialik +972-4-876-6501 P7 Rehovot +972-8-936-5065 P3 Netanya +972-9-884-3433 P8 Jerusalem +972-2-652-8578 P4 Rishon LeZion +972-3-962-2918 P9 Ashdod +972-8-8568110 P5 Carmiel +972-4-958-2824

Upload: trinhkiet

Post on 04-Feb-2018

237 views

Category:

Documents


10 download

TRANSCRIPT

Page 1: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005

ISO/IEC 17025; 2005

ISO/IEC 17020; 2012

Testing Laboratory

Calibration Laboratory

Inspection Activity-Type A

Department:

The certificate attached is an integral part of the schedule and is numbered identicallyื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื— ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืž

Date of issue 24.07.2017 Version No. 7 Page No. 1 of: 54

Name and Address:

Isotop ltd.

20 Hayarok St.

Industrial Zone, Kanot, Israel

Laboratory name

Address

+972-8-869-7200 Phone +972-8-869-7007 Fax [email protected]; [email protected] E-Mail www.isotop.co.il Web Site

As declared by the organization, following is a list of the permanent sites and the phones numbers at which accredited activities are preformed.

P Main: Kanot Definitions:

Main site:

A central site where the quality system is controlled

for all sites where tests, calibrations or sampling are

preformed.

Permanent site (Branch):

Permanent or temporary site existing longer than 6

months where at, or from which, the activities part of

the accreditation schedule are preformed.

P1 Nazareth illit +972-4-657-5380 P6 Beer Sheva +972-8-628-0193

P2 Kiryat Bialik +972-4-876-6501 P7 Rehovot +972-8-936-5065

P3 Netanya +972-9-884-3433 P8 Jerusalem +972-2-652-8578

P4 Rishon LeZion +972-3-962-2918 P9 Ashdod +972-8-8568110

P5 Carmiel +972-4-958-2824

Page 2: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 2 of: 54

Item

Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction - Building Systems :ืžืขืจื›ื•ืช ื”ื‘ื ื™ื™ืŸ -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Design and Installation, Building envelope ืขื˜ืคืช ื”ืžื‘ื ื”ืž ,ืชื›ืŸ ื•ื”ืชืงื ื”

1 A T;T1;

T2;T3;

T4;T5;T6;T7;

T8

Building Envelope -

External walls and

openings in external walls

ืงื™ืจื•ืช -ืžืขื˜ืคืช ื”ื‘ื ื™ืŸ ื—ื™ืฆื•ื ื™ื™ื ื•ืคืชื—ื™ื ื‘ืงื™ืจื•ืช

ื—ื™ืฆื•ื ื™ื™ื

Watertightness test

SI 1476 part 2 ืœื—ื“ื™ืจืช ืžื™ื ื‘ื“ื™ืงืช ืื˜ื™ืžื•ืช

---

2 A T;T1;

T2;T3;T4;T5;

T6;T7;

T8

Building Envelope -

Flat roofs and balconies

ื’ื•ืช ื’ -ืžืขื˜ืคืช ื”ื‘ื ื™ืŸ ืฉื˜ื•ื—ื™ื ื•ืžืจืคืกื•ืช

Watertightness test

SI 1476 part 1 ืœื—ื“ื™ืจืช ืžื™ื ื‘ื“ื™ืงืช ืื˜ื™ืžื•ืช

---

Page 3: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 3 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction - Concrete and raw materials for concrete :ื‘ื˜ื•ืŸ ื•ื—ื•ืžืจื™ ื’ืœื ืœื™ื™ืฆื•ืจ ื‘ื˜ื•ืŸ -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical Testing, Classical Chemistry ื›ื™ืžื™ื” ืงืœืืกื™ืช, ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช

3 A P Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Cement content ืชื›ื•ืœืช ื”ืฆืžื ื˜ SI 26 part 5.4 ---

4 A P Cement ืฆืžื ื˜ Chemical analysis of cement ืฆืžื ื˜ ืฉืœ ื›ื™ืžื™ืช ืื ืœื™ื–ื” SI 2 part 2 ---

Page 4: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 4 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction - Concrete, Cladding and Raw Materials for

Concrete Manufacturing

ืŸื—ื™ืคื•ื™ื™ื ื•ื—ื•ืžืจื™ ื’ืœื ืœื™ื™ืฆื•ืจ ื‘ื˜ื• ,ื‘ื˜ื•ืŸ -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

5 A P Admixtures for

concrete and grout

ืœื‘ื˜ื•ืŸ ื•ืœื“ื™ืกืžื•ืกืคื™ื All tests specified in the standard ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช SI 896 part 1 ---

6 A P Cement ืฆืžื ื˜ Determination of fineness ื”ื˜ื—ื™ื ื” ื“ืงื•ืช ืงื‘ื™ืขืช SI 2 part 6 ---

7 A P Cement ืฆืžื ื˜ Determination of setting time and soundness

ื•ืงื‘ื™ืขื•ืช ื”ื”ืชืงืฉืจื•ืช ื–ืžืŸ ืงื‘ื™ืขืช ื”ื ืคื—

SI 2 part 3 ---

8 A P Cement ืฆืžื ื˜ Determination of strength ืงื‘ื™ืขืช ื”ื—ื•ื–ืง SI 2 part 1 ---

9 A P Cement ืฆืžื ื˜ Methods of taking and preparing

samples of cement

ื•ื”ื›ื ืช ืฆืžื ื˜ ืฉืœ ื ื˜ื™ืœื” ืฉื™ื˜ื•ืช ื“ื•ื’ืžื•ืช

SI 2 part 7 ---

10 A P Cement: common

cements

SI 1 part 1 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช All tests specified in the standard ืฆืžื ื˜ ืจื’ื™ืœ---

11 A P Cement: sulfate-

resisting portland

cements

ื“ ืขืžื™ื“ ื ืฆืžื ื˜ ืคื•ืจื˜ืœ ืกื•ืœืคื˜ื™ื

All tests specified in the standard ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช SI 1 part 2

---

12 A P;T;

P1;T1;

P2;T2;

P3;T3; P4;T4;

P5;T5;

P6;T6; P7;T7;

P8;T8

Concrete ื‘ื˜ื•ืŸ Making and curing of test

specimens

ื“ื•ื’ืžื•ืช ื‘ื“ื™ืงื” ืฉืœ ื”ื›ื ืช ื•ืืฉืคืจืชืŸ

SI 26 part 3

---

Page 5: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 5 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction - Concrete, Cladding and Raw Materials for

Concrete Manufacturing

ืŸื—ื™ืคื•ื™ื™ื ื•ื—ื•ืžืจื™ ื’ืœื ืœื™ื™ืฆื•ืจ ื‘ื˜ื• ,ื‘ื˜ื•ืŸ -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

13 A P;P1;

P2;P3;

P4;P5;

P6;P7; P8

Concrete :

Specification,

performance and

production

ืชืคืงื•ื“ : ื“ืจื™ืฉื•ืช ื‘ื˜ื•ืŸ ื•ื™ื™ืฆื•ืจ

compressive strength ื—ื•ื–ืง ื”ืœื—ื™ืฆื” SI 118 section 10.3 & 10.4

---

14 A P;T

Concrete :

Specification,

performance and

production

: ื“ืจื™ืฉื•ืช ืชืคืงื•ื“ ื‘ื˜ื•ืŸ ื•ื™ื™ืฆื•ืจ

Homogeneity of the mixing ืื—ื™ื“ื•ืช ื”ืขืจื‘ื•ืœ SI 118 Appendix 5

---

15 A P;T;

P7;T7

Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Air content โ€“ Pressure gauge

method

SI 26 part 2.6 ืœื—ืฅืžื“ ืฉื™ื˜ืช -ืชื›ื•ืœืช ื”ืื•ื•ื™ืจ---

16 A P;T;

P7;T7

Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Bleeding ื”ืคืจืฉืช ืžื™ื SI 26 part 2.8 ---

17 A P;T;

P1;T1;

P2;T2; P4;T4;

P7;T7

Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Density ืฆืคื™ืคื•ืช SI 26 part 2.5

---

18 A T;T1;

T2;T3;T4;T5;

T6;T7;

T8

Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Sampling ื ื˜ื™ืœืช ื”ืžื“ื’ื ื”ืžื™ื™ืฆื’ SI 26 part 1

---

19 A P;T;

P7;T7

Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Setting time - Penetration

resistance

ื”ืชื ื’ื“ื•ืช -ื–ืžืŸ ื”ื”ืชืงืฉืจื•ืช ืœื—ื“ื™ืจื”

SI 26 part 2.7 ---

Page 6: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 6 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction - Concrete, Cladding and Raw Materials for

Concrete Manufacturing

ืŸื—ื™ืคื•ื™ื™ื ื•ื—ื•ืžืจื™ ื’ืœื ืœื™ื™ืฆื•ืจ ื‘ื˜ื• ,ื‘ื˜ื•ืŸ -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

20 A P;T;

P1;T1;

P2;T2;

P3;T3; P4;T4;

P5;T5;

P6;T6; P7;T7;

P8;T8

Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Slump test ื‘ื“ื™ืงืช ืฉืงื™ืขื” -ืกื•ืžืš SI 26 part 2.1

---

Meet the requirement of IS 118 part

4.2.1

21 A P;T Freshly Mixed

Portland Cement

Concrete

ื‘ื˜ื•ืŸ ืฆืžื ื˜ ืคื•ืจื˜ืœื ื“ ืžืขื•ืจื‘ ื˜ืจื™

Temperature ื˜ืžืคืจื˜ื•ืจื” ASTM-C-1064

---

22 A P Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Abrasion resistance ืขืžื™ื“ื•ืช ื‘ืฉื—ื™ืงื” SI 26 part 5 section 208 ---

23 A P;P1;

P2;P3; P4;P5;

P6;P7;

P8

Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Compressive Strength ืœื—ื™ืฆื” ื—ื•ื–ืง SI 26 part 4.1

---

24 A P Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ density ืฆืคื™ืคื•ืช SI 26 part 5 ---

25 A P Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Depth of penetration of water

under pressure

SI 26 part 5.2 ืขื•ืžืง ื”ื—ื“ื™ืจื” ืฉืœ ืžื™ื ื‘ืœื—ืฅ---

26 A P Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Elastic modulus in compression ื‘ืœื—ื™ืฆื”ืžื•ื“ื•ืœ ืืœืกื˜ื™ื•ืช SI 26 part 5.6 ---

27 A P Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Flexural Strength ื›ืคื™ืคื” ื—ื•ื–ืง SI 26 part 4.2

Page 7: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 7 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction - Concrete, Cladding and Raw Materials for

Concrete Manufacturing

ืŸื—ื™ืคื•ื™ื™ื ื•ื—ื•ืžืจื™ ื’ืœื ืœื™ื™ืฆื•ืจ ื‘ื˜ื• ,ื‘ื˜ื•ืŸ -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

28 A P Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Moisture content when dry in air ืชื›ื•ืœืช ื”ืจื˜ื™ื‘ื•ืช ื‘ืžืฆื‘ ื™ื‘ืฉ ื‘ืื•ื•ื™ืจ

SI 26 part 5.1 ---

29 A P;T;

P1;T1

Hardened concrete ื‘ื˜ื•ืŸ ืฉื”ืชืงืฉื” ื‘ืžื‘ื ื” Sampling, preparing and testing

compressive strength

SI 26 part 6 ื ื˜ื™ืœื”, ื”ื›ื ื” ื•ื‘ื“ื™ืงืช ื—ื•ื–ืง ---

30 A P; P8 Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Tensile splitting Strength ืžืชื™ื—ื” ืœื ื™ืฉื™ืจื” ื—ื•ื–ืง SI 26 part 4.3

31 A P Hardened concrete ืงืฉื•ื™ื‘ื˜ื•ืŸ Water absorption ื›ื•ืฉืจ ื”ืกืคื™ื’ื•ืช ืœืžื™ื SI 26 part 5.1 ---

32 A P;P1;

P2;P3; P4;P5;

P6;P7;

P8

Non-structural

lightweight concrete

ื‘ื˜ื•ืŸ ืงืœ ืœืฉื™ืžื•ืฉื™ื ืœื ืžื‘ื ื™ื™ื

Compressive strength ื—ื•ื–ืง ื”ืœื—ื™ืฆื” SI 1513 section 522

---

33 A P;T;

P1;T1; P2;T2;

P3;T3;

P4;T4;

P5;T5;

P6;T6;

P7;T7; P8;T8

Non-structural

lightweight concrete

ื‘ื˜ื•ืŸ ืงืœ ืœืฉื™ืžื•ืฉื™ื ืœื ืžื‘ื ื™ื™ื

Sampling ื ื˜ื™ืœืช ืžื“ื’ืžื™ื ื•ื”ื›ื ืช ื“ื•ื’ืžื•ืช ื‘ื“ื™ืงื”

SI 1513 section 3

---

Page 8: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 8 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction - Concrete, Cladding and Raw Materials for

Concrete Manufacturing

ืŸื—ื™ืคื•ื™ื™ื ื•ื—ื•ืžืจื™ ื’ืœื ืœื™ื™ืฆื•ืจ ื‘ื˜ื• ,ื‘ื˜ื•ืŸ -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

34 A P;T;

P1;T1;

P2;T2;

P3;T3; P4;T4;

P5;T5;

P6;T6; P7;T7;

P8;T8

Non-structural

lightweight concrete

ื‘ื˜ื•ืŸ ืงืœ ืœืฉื™ืžื•ืฉื™ื ืœื ืžื‘ื ื™ื™ื

Relative spatial weight

SI 1513 section 202 ืžืฉืงืœ ื™ื—ืกื™ ืžืจื—ื‘ื™

---

35 A P;T;

P1;T1;

P2;T2; P4;T4;

P6;T6;

P7;T7; P8;T8

Prestressed concrete ื‘ื˜ื•ืŸ ื“ืจื•ืš Grout ื“ื™ืก SI 466 part 3 section 31.3

---

ืžื•ืฆืจ

36 A T;T2 Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Consistency - Vebe test ื‘ื“ื™ืงืช ืกื•ืžืš ื‘ืฉื™ื˜ืช ื•ื™ื‘ื™ SI 26 part 2.2 ---

37 A P:T

T2:T3

Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Consistency-Flow table test ื‘ืฉื•ืœื—ืŸ ื–ืจื™ืžื” ื‘ื“ื™ืงื” โ€“ืกื•ืžืš SI 26 part 2.3 ---

38 A P Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Cloride ion penetration in

hardened concrete

ASTM C1202 ืžืขื‘ืจ ื™ื•ืŸ ื›ืœื•ืจ ื‘ื‘ื˜ื•ืŸ ืงืฉื•ื™---

Page 9: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 9 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction - Engineering Testing :ื‘ื“ื™ืงื•ืช ื”ื ื“ืกื™ื•ืช -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Carpentry Work in Buildings and Shelters and Protected Areas ืžื‘ื ื™ืื‘ื•ื ื’ืจื•ืช ืžืงืœื˜ื™ื ืžืžื“ื™ื

39 A T Air- raid shelters and

protective areas

SI 4577 ื‘ื“ื™ืงืช ืื˜ื™ืžื•ืช Sealing test ืžืงืœื˜ื™ื ื•ืžืจื—ื‘ื™ื ืžื•ื’ื ื™ื---

40 A T Air ventilation and

filtration systems for

air-ra air-raid shelters

ืžืขืจื›ื•ืช ืœืื•ื•ืจื•ืจ ื•ืœืกื™ื ื•ืŸ ืฉืœ ืื•ื•ื™ืจ ื‘ืžืงืœื˜ื™ื

Acceptance tests ื‘ื“ื™ืงื•ืช ืงื‘ืœื” SI 4570 part 4 section

3.3 ---

41 A T Metalworks items for

shelters: items for

protected areas

ืžืกื’ืจื•ืช ืœืžืงืœื˜ื™ื: ืคืจื™ื˜ื™ ืคืจื™ื˜ื™ื ืœืžืจื—ื‘ื™ื ืžื•ื’ื ื™ื

Installation testing ื‘ื“ื™ืงื•ืช ื”ืชืงื ื” SI 4422 part 3

---

42 A T Metalworks items for

shelters: items for

shelters, that are not protected areas

ืคืจื™ื˜ื™ ืžืกื’ืจื•ืช ืœืžืงืœื˜ื™ื: ืคืจื™ื˜ื™ื ืœืžืงืœื˜ื™ื ืฉืื™ื ื

ืžืจื—ื‘ื™ื ืžื•ื’ื ื™ื

Requirements testing and

installation

SI 4422 part 1 ื•ื”ืชืงื ื” ื‘ื“ื™ืงื•ืช, ื“ืจื™ืฉื•ืช

---

43 A P;T Plaster ื˜ื™ื— The plastering system at the site ืžืขืจื›ืช ื”ื˜ื™ื— ื‘ืืชืจ SI 1920 part 2

---

Requirements according to: SI 5075

sections 3.1, 3.2, 4.1.2, 4.2, 5.1, 6.2, 6.3

and 8

44 A T Wooden door frames

for hinged doors

SI 23 part 2 chapter A ืขื ื™ื™ื ื™ื ื›ืœืœื™ื General Matters ืกื•ื‘ื‘ื•ืช ืœื“ืœืชื•ืช ืขืฅ ืžืœื‘ื ื™---

45 A T Wooden door frames

for hinged doors

SI 23 part 2 chapter B ื“ืจื™ืฉื•ืช ื›ืœืœื™ื•ืช General requirements ืกื•ื‘ื‘ื•ืช ืœื“ืœืชื•ืช ืขืฅ ืžืœื‘ื ื™---

46 A T Wooden door frames

for hinged doors

SI 23 part 2 chapter C ื—ื•ืžืจื™ื, ืžื‘ื ื” ื•ื’ื™ืžื•ืจ Materials, structure and finish ืกื•ื‘ื‘ื•ืช ืœื“ืœืชื•ืช ืขืฅ ืžืœื‘ื ื™---

47 A T Wooden door frames

for hinged doors

Tests methods and additional ืกื•ื‘ื‘ื•ืช ืœื“ืœืชื•ืช ืขืฅ ืžืœื‘ื ื™

requirements: deviations from right angles

ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื” ื•ื“ืจื™ืฉื•ืช ื ื•ืกืคื•ืช: ืกื˜ื™ื™ื” ืžื”ื–ื•ื•ื™ื•ืช ื”ื™ืฉืจื•ืช

SI 23 part 2 chapter D

section 4.3 ---

48 A T Wooden door frames

for hinged doors

Tests methods and additional ืกื•ื‘ื‘ื•ืช ืœื“ืœืชื•ืช ืขืฅ ืžืœื‘ื ื™

requirements: Dimensions

ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื” ื•ื“ืจื™ืฉื•ืช ื ื•ืกืคื•ืช: ืžื™ื“ื•ืช

SI 23 part 2 chapter D

section 4.1 ---

Page 10: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 10 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction Materials and Products :ื—ื•ืžืจื™ื ื•ืžื•ืฆืจื™ ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

49 A P Autoclaved aerated-

concrete blocks

ืชืื™-ืžื‘ื˜ื•ืŸ ื‘ืœื•ืงื™ืื‘ืื•ื˜ื•ืงืœื‘ ืžืื•ืฉืคืจื™ื

Compressive strength ื—ื•ื–ืง ื”ืœื—ื™ืฆื” SI 268 section 203 ---

50 A P Autoclaved aerated-

concrete blocks

ืชืื™-ืžื‘ื˜ื•ืŸ ื‘ืœื•ืงื™ืื‘ืื•ื˜ื•ืงืœื‘ ืžืื•ืฉืคืจื™ื

Dimensions and shape ืžื™ื“ื•ืช ื•ืฆื•ืจื” SI 268 section 201 ---

51 A P Autoclaved aerated-

concrete blocks

ืชืื™-ืžื‘ื˜ื•ืŸ ื‘ืœื•ืงื™ืื‘ืื•ื˜ื•ืงืœื‘ ืžืื•ืฉืคืจื™ื

Specific density ืžืฉืงืœ ืกื’ื•ืœื™ SI 268 section 202 ---

52 A P Ceramic wall and floor

tiles

ืœื—ื™ืคื•ื™ ืงืจืžื™ืงื” ืืจื™ื—ื™ื•ืœืจื™ืฆื•ืฃ ืงื™ืจื•ืช

Abrasion resistance โ€“ glazed tiles ืขืžื™ื“ื•ืช ื‘ืฉื—ื™ืงื” ืฉืœ ืืจื™ื—ื™ื ืžื–ื•ื’ื’ื™ื

SI 314 section 302.4 ---

53 A P Ceramic wall and floor

tiles

ืœื—ื™ืคื•ื™ ืงืจืžื™ืงื” ืืจื™ื—ื™ื•ืœืจื™ืฆื•ืฃ ืงื™ืจื•ืช

Abrasion resistance โ€“ unglazed

tiles

ืขืžื™ื“ื•ืช ื‘ืฉื—ื™ืงื” ืฉืœ ืืจื™ื—ื™ื ืœื ืžื–ื•ื’ื’ื™ื

SI 314 section 302.3 ---

54 A P Ceramic wall and floor

tiles

ืœื—ื™ืคื•ื™ ืงืจืžื™ืงื” ืืจื™ื—ื™ื•ืœืจื™ืฆื•ืฃ ืงื™ืจื•ืช

Absorption ืกืคื™ื’ื•ืช SI 314 section 302.1 ---

55 A P Ceramic wall and floor

tiles

ืœื—ื™ืคื•ื™ ืงืจืžื™ืงื” ืืจื™ื—ื™ื•ืœืจื™ืฆื•ืฃ ืงื™ืจื•ืช

Bending strength ื—ื•ื–ืง ื”ื›ืคื™ืคื” SI 314 section 302.2 ---

56 A P Ceramic wall and floor

tiles

ืœื—ื™ืคื•ื™ ืงืจืžื™ืงื” ืืจื™ื—ื™ื•ืœืจื™ืฆื•ืฃ ืงื™ืจื•ืช

Confirmation of a batch of tiles ืื™ืฉื•ืจ ืžื ื” ืฉืœ ืืจื™ื—ื™ื SI 314 appendix A ---

57 A P Ceramic wall and floor

tiles

ืœื—ื™ืคื•ื™ ืงืจืžื™ืงื” ืืจื™ื—ื™ื•ืœืจื™ืฆื•ืฃ ืงื™ืจื•ืช

Crazing resistance โ€“ glazed tiles ื‘ืกื“ืงื™ื ืฉืœ ืืจื™ื—ื™ื ืขืžื™ื“ื•ืช ืžื–ื•ื’ื’ื™ื

SI 314 section 302.7 ---

58 A P Ceramic wall and floor

tiles

ืœื—ื™ืคื•ื™ ืงืจืžื™ืงื” ืืจื™ื—ื™ื•ืœืจื™ืฆื•ืฃ ืงื™ืจื•ืช

Dimensions, shape and defects ืžื™ื“ื•ืช, ืฆื•ืจื” ื•ืคื’ืžื™ื SI 314 section 301 ---

59 A P Ceramic wall and floor

tiles

ืœื—ื™ืคื•ื™ ืงืจืžื™ืงื” ืืจื™ื—ื™ื•ืœืจื™ืฆื•ืฃ ืงื™ืจื•ืช

General matters ืขื ื™ื™ื ื™ื ื›ืœืœื™ื SI 314 chapter A ---

60 A P Ceramic wall and floor

tiles

ืœื—ื™ืคื•ื™ ืงืจืžื™ืงื” ืืจื™ื—ื™ื•ืœืจื™ืฆื•ืฃ ืงื™ืจื•ืช

Tests method ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื” SI 314 chapter B ---

61 A P Concrete blocks for

walls

SI 5 part 1 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช All tests specified in the standard ื‘ืœื•ืงื™ ื‘ื˜ื•ืŸ ืœืงื™ืจ---

Page 11: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 11 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction Materials and Products :ื—ื•ืžืจื™ื ื•ืžื•ืฆืจื™ ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

62 A P Concrete blocks:

Blocks for ribbed ceiling filling

ืœืžื™ืœื•ื™ ื‘ืœื•ืงื™ื: ื‘ื˜ื•ืŸ ื‘ืœื•ืงื™ืฆืœืขื•ืช ืชืงืจืช

All tests specified in the standard ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช SI 5 part 2 ---

63 A P Exterior cladding:

mosaic and ceramic

Installation of mosaic and ceramic ื—ื™ืคื•ื™ ื—ื•ืฅ: ืคืกื™ืคืก ื•ืงืจืžื™ืงื”

flooring and cladding system in

buildings: Exterior Tensile strength of the implementation

layer in the laboratory

ืžืขืจื›ืช ืคืกื™ืคืก ื•ืืจื™ื—ื™ ืงืจืžื™ืงื” ืœืจื™ืฆื•ืฃ ื•ืœื—ื™ืคื•ื™ ื‘ื ื™ื™ื ื™ื: ื—ื™ืคื•ื™

ื—ื•ืฅ ื—ื•ื–ืง ื”ืžืชื™ื—ื” ืฉืœ ืจืงืข ื‘ืžืขื‘ื“ื”

SI 1555 part 1 section

5.1 ---

64 A T Exterior cladding:

mosaic and ceramic

Installation of mosaic and ceramic ื—ื™ืคื•ื™ ื—ื•ืฅ: ืคืกื™ืคืก ื•ืงืจืžื™ืงื”

flooring and cladding system in

buildings: Exterior Tensile strength of the implementation

layer in the intermediate layer

(Mortar)

ืžืขืจื›ืช ืคืกื™ืคืก ื•ืืจื™ื—ื™ ืงืจืžื™ืงื” ืœืจื™ืฆื•ืฃ ื•ืœื—ื™ืคื•ื™ ื‘ื ื™ื™ื ื™ื: ื—ื™ืคื•ื™

ื—ื•ื–ืง ื”ืžืชื™ื—ื” ื—ื•ืฅ.ืฉืœ ื”ืจืงืข ืื• ืฉืœ ื”ืจืงืข ื•ืฉื›ื‘ืช

ื”ื‘ื™ื ื™ื™ื )ื˜ื™ื—(

SI 1555 part 1 section

5.2.1.2

---

65 A T Exterior cladding:

mosaic and ceramic

Installation of mosaic and ceramic ื—ื™ืคื•ื™ ื—ื•ืฅ: ืคืกื™ืคืก ื•ืงืจืžื™ืงื”

flooring and cladding system in

buildings: Exterior Adhesion

strength: axle pull

ืžืขืจื›ืช ืคืกื™ืคืก ื•ืืจื™ื—ื™ ืงืจืžื™ืงื” ืœืจื™ืฆื•ืฃ ื•ืœื—ื™ืคื•ื™ ื‘ื ื™ื™ื ื™ื: ื—ื™ืคื•ื™

ื” . ื—ื•ื–ืง ื”ื”ื“ื‘ืงื” ื‘ืžืฉื™ื› ื—ื•ืฅ ืฆื™ืจื™ืช

SI 1555 part 1 section

5.2.1.3 ---

a wall prototype

66 A T Exterior cladding:

mosaic and ceramic

Installation of mosaic and ceramic ื—ื™ืคื•ื™ ื—ื•ืฅ: ืคืกื™ืคืก ื•ืงืจืžื™ืงื”

flooring and cladding system in

buildings: Exterior Adhesion

strength: axle pull

ืžืขืจื›ืช ืคืกื™ืคืก ื•ืืจื™ื—ื™ ืงืจืžื™ืงื” ืœืจื™ืฆื•ืฃ ื•ืœื—ื™ืคื•ื™ ื‘ื ื™ื™ื ื™ื: ื—ื™ืคื•ื™ ื—ื•ืฅ. ื—ื•ื–ืง ื” ื”ื“ื‘ืงื” ื‘ืžืฉื™ื›ื” ืฆื™ืจื™ืช

SI 1555 part 1 section

5.2.2 ---

67 A P;T Mosaic tiles made of

ceramic or glass

ืื• ืžืงืจืžื™ืงื” ืคืกื™ืคืก ืžื–ื›ื•ื›ื™ืช

Adhesive strength ื—ื•ื–ืง ื”ื™ื“ื‘ืงื•ืช SI 1353 section 204.8 ---

68 A P Natural stone cladded

walls

ื˜ื‘ืขื™ืช ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช Bulk specific gravity ืžืฉืงืœ ืกื’ื•ืœื™ ืžืจื—ื‘ื™ )ืžืฉืงืœ ืžืจื—ื‘ื™(

SI 2378 part 1 section

6.1.3 ---

69 A P Natural stone cladded

walls

ื˜ื‘ืขื™ืช ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช Initial compressive strength ื—ื•ื–ืง ืชื—ื™ืœื™ ื‘ืœื—ื™ืฆื” SI 2378 part 1 section

6.1.7 ---

Page 12: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 12 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction Materials and Products :ื—ื•ืžืจื™ื ื•ืžื•ืฆืจื™ ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

70 A P Natural stone cladded

walls

ื˜ื‘ืขื™ืช ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช Initial modulus of rupture ื—ื•ื–ืง ืชื—ื™ืœื™ ื‘ื›ืคื™ืคื” SI 2378 part 1 section

6.1.9 ---

71 A P Natural stone cladded

walls

ื˜ื‘ืขื™ืช ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช Loss of compressive strength after

salt crystallization

ื™ืจื™ื“ื” ื‘ื—ื•ื–ืง ื”ืœื—ื™ืฆื” ืœืื—ืจ ื‘ืœื™ื” ืžื•ืืฆืช

SI 2378 part 1 section

6.1.8 ---

72 A P Natural stone cladded

walls

ื˜ื‘ืขื™ืช ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช Loss of modulus of rupture after

salt crystallization

ื‘ื—ื•ื–ืง ื”ื›ืคื™ืคื” ืœืื—ืจ ื™ืจื™ื“ื” ื‘ืœื™ื” ืžื•ืืฆืช

SI 2378 part 1 section

6.1.10 ---

73 A P Natural stone cladded

walls

ื˜ื‘ืขื™ืช ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช Resistance to salt crystallization ื”ืชื’ื‘ืฉื•ืช ืžืœื—ื™ื SI 2378 part 1 section

6.1.4 ---

74 A T Natural stone cladded

walls

ื˜ื‘ืขื™ืช ืงื™ืจื•ืช ืžื—ื•ืคื™ื ื‘ืื‘ืŸ Wall cladded by adhesion

combined with mechanical fixing

ืงื™ืจื•ืช ืžื—ื•ืคื™ื ื‘ืฉื™ื˜ืช ื”ื”ื“ื‘ืงื” ื‘ืฉื™ืœื•ื‘ ืงื™ื‘ื•ืข ืžื›ื ื™

SI 2378 part 4 section

5.2

--- Not including section 5.2.3.3

75 A P Natural stone cladded

walls

ื˜ื‘ืขื™ืช ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช Water absorption ื›ื•ืœืœืชืกืคื™ื’ื•ืช SI 2378 part 1 section

6.1.1 ---

76 A P Natural stone cladded

walls

ื˜ื‘ืขื™ืช ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช Water absorption by capillarity ืกืคื™ื’ื•ืช ื ื™ืžื™ืช SI 2378 part 1 section

6.1.2 ---

77 A T Natural stone cladded

walls.

Walls cladded using a wet fixing ืงื™ืจื•ืช ืžื—ื•ืคื™ื ื‘ืื‘ืŸ ื˜ื‘ืขื™ืช

method. on site tests before and

during work cladding

ืงื™ืจื•ืช ืžื—ื•ืคื™ื ื‘ืงื™ื‘ื•ืข ืจื˜ื•ื‘. ื‘ื“ื™ืงื•ืช ื‘ืืชืจ ืœืคื ื™ ืชื—ื™ืœืช ืžืœืื›ืช ื”ื—ื™ืคื•ื™ ื•ื‘ืžื”ืœื›ื”

SI 2378 part 2 section

5.1.1

---

78 A P Precast concrete kerbs

and channels

ืชืขืœื” ื•ืื‘ื ื™ ืฉืคื” ืื‘ื ื™ืžื‘ื˜ื•ืŸ ื˜ืจื•ืžื•ืช

All tests specified in the standard ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช SI 19 ---

79 A P Prefabricated concrete

products for paving

ืžื•ืฆืจื™ ื‘ื˜ื•ืŸ ื˜ืจื•ืžื™ื™ื ืœืจื™ืฆื•ืฃ

All tests specified in the standard ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช SI 8 ---

80 A P Screws ื‘ืจื’ื™ื Mechanical properties(Strength)

SI 1225 part 1 section ืžืืคื™ื™ื ื™ื ืžื›ื ื™ื )ื—ื•ื–ืง(

3.2.1 ---

Page 13: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 13 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction Materials and Products :ื—ื•ืžืจื™ื ื•ืžื•ืฆืจื™ ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

81 A P Slabs of terrazzo or

slabs of concrete covered with terrazzo

or with marble

segments for stairs surfacing

ืœื•ื—ื•ืช ืื• ืžื˜ืจืืฆื• ืœื•ื—ื•ืช ืื• ื˜ืจืืฆื• ื‘ืฆื™ืคื•ื™ ืžื‘ื˜ื•ืŸ ืœื—ื™ืคื•ื™, ืื‘ืŸ ืคืœื—ื™ ื‘ืฆื™ืคื•ื™ ืžื“ืจื’ื•ืช

All tests specified in the standard ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช SI 1554

---

82 A P Steel for the

reinforcement of

concrete: Plain bars

ืžื•ื˜ื•ืช :ื‘ื˜ื•ืŸ ืœื–ื™ื•ืŸ ืคืœื“ื” ื—ืœืงื™ื

Bending strength ื—ื•ื–ืง ื”ื›ืคื™ืคื” SI 4466 part 2 section

3.2 ---

83 A P Steel for the

reinforcement of concrete: Plain bars

ืžื•ื˜ื•ืช :ื‘ื˜ื•ืŸ ืœื–ื™ื•ืŸ ืคืœื“ื” ื—ืœืงื™ื

Defects

SI 4466 part 2 section ืคื’ืžื™ื

2.5 ---

84 A P Steel for the

reinforcement of

concrete: Plain bars

ืžื•ื˜ื•ืช :ื‘ื˜ื•ืŸ ืœื–ื™ื•ืŸ ืคืœื“ื” ื—ืœืงื™ื

Tensile strength ื—ื•ื–ืง ื”ืžืชื™ื—ื” SI 4466 part 2 section

3.1 ---

85 A P Steel for the reinforcement of

concrete: Plain bars

ืžื•ื˜ื•ืช :ื‘ื˜ื•ืŸ ืœื–ื™ื•ืŸ ืคืœื“ื” ื—ืœืงื™ื

Waviness ื’ืœื™ื•ืช SI 4466 part 2 section 3.3 ---

86 A P Steel for the

reinforcement of

concrete: Ribbed bars

ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžื•ื˜ื•ืช ืžืฆื•ืœืขื™ื

Bending and rebending strength ื›ืคื™ืคื” ื•ื›ืคื™ืคื” ื—ื•ื–ืจืช SI 4466 part 3 section 2

---

87 A P Steel for the

reinforcement of

concrete: Ribbed bars

ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžื•ื˜ื•ืช ืžืฆื•ืœืขื™ื

Defects ืคื’ืžื™ื SI 4466 part 3 section 5

---

88 A P Steel for the

reinforcement of

concrete: Ribbed bars

ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžื•ื˜ื•ืช ืžืฆื•ืœืขื™ื

Shape ืฆื•ืจื” SI 4466 part 3 section 5

---

Page 14: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 14 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction Materials and Products :ื—ื•ืžืจื™ื ื•ืžื•ืฆืจื™ ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

89 A P Steel for the

reinforcement of concrete: Ribbed bars

ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžื•ื˜ื•ืช ืžืฆื•ืœืขื™ื

Tensile strength

SI 4466 part 3 section ื—ื•ื–ืง ื”ืžืชื™ื—ื”

9.1 ---

90 A P Steel for the

reinforcement of

concrete: Ribbed bars

ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžื•ื˜ื•ืช ืžืฆื•ืœืขื™ื

Waviness

SI 4466 part 3 section 5 ื’ืœื™ื•ืช

---

91 A P Steel for the

reinforcement of concrete: Welded

fabric

ืจืฉืชื•ืช ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžืจื•ืชื›ื•ืช

Aloud deviations ืกื˜ื™ื•ืช ืžื•ืชืจื•ืช SI 4466 part 4 section

303 ---

92 A P Steel for the

reinforcement of concrete: Welded

fabric

ืจืฉืชื•ืช ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžืจื•ืชื›ื•ืช

Bending and rebending strength ื›ืคื™ืคื” ื•ื›ืคื™ืคื” ื—ื•ื–ืจืช SI 4466 part 4 section

303 ---

93 A P Steel for the

reinforcement of concrete: Welded

fabric

ืจืฉืชื•ืช ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžืจื•ืชื›ื•ืช

Composition Chemical ื”ืจื›ื‘ ื›ื™ืžื™ SI 4466 part 4 section

207

---

94 A P Steel for the

reinforcement of

concrete: Welded fabric

ืจืฉืชื•ืช ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžืจื•ืชื›ื•ืช

Diameters

SI 4466 part 4 section ืงื˜ืจื™ื

301 ---

95 A P Steel for the

reinforcement of

concrete: Welded fabric

ืจืฉืชื•ืช ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžืจื•ืชื›ื•ืช

Dimensions

SI 4466 part 4 section ืžื™ื“ื•ืช

202

---

Page 15: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 15 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Construction Materials and Products :ื—ื•ืžืจื™ื ื•ืžื•ืฆืจื™ ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

96 A P Steel for the

reinforcement of concrete: Welded

fabric

ืจืฉืชื•ืช ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžืจื•ืชื›ื•ืช

Dimensions ืžื™ื“ื•ืช SI 4466 part 4 section

302 ---

97 A P Steel for the

reinforcement of concrete: Welded

fabric

ืจืฉืชื•ืช ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžืจื•ืชื›ื•ืช

Fabric welded ืจื™ืชื•ื›ื™ ื”ืจืฉืช SI 4466 part 4 section

304 ---

98 A P Steel for the

reinforcement of

concrete: Welded fabric

ืจืฉืชื•ืช ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžืจื•ืชื›ื•ืช

Mechanical tensile properties ืชื›ื•ื ื•ืช ืžื›ื ื™ื•ืช ื‘ืžืชื™ื—ื” SI 4466 part 4 section

204 ---

99 A P Steel for the

reinforcement of

concrete: Welded fabric

ืจืฉืชื•ืช ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžืจื•ืชื›ื•ืช

Shape ืฆื•ืจื” SI 4466 part 4 section

203 ---

100 A P Steel for the

reinforcement of

concrete: Welded fabric

ืจืฉืชื•ืช ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžืจื•ืชื›ื•ืช

Waviness

SI 4466 part 4 section ื’ืœื™ื•ืช

206

---

101 A P;T Stone ืื‘ืŸ Quality, dimensions, processing

and shape

Ministry Of Defense ื˜ื™ื‘, ืžื™ื“ื•ืช, ืขื™ื‘ื•ื“ ื•ืฆื•ืจื”

Specification 14 section

1401

---

102 A P Terrazzo floor tiles ืžื˜ืจืืฆื• ืจืฆืคื” ืืจื™ื—ื™ All tests specified in the standard ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช SI 6 ---

Page 16: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 16 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Engineering Items - Buildings, Constructions, Infrastructure and

Concrete

ืžื‘ื ื™ื, ืชืฉืชื™ื•ืช ื•ื‘ื˜ื•ืŸ -ืคืจื™ื˜ื™ื ื”ื ื“ืกื™ื™ื ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

Non Destructive Tests ื‘ื“ื™ืงื•ืช ืœื ื”ื•ืจืกื•ืช

103 A T Football goals ืฉืขืจื™ ื›ื“ื•ืจื’ืœ Functional and safety requirements

and test methods

ื•ื‘ื˜ื™ื—ื•ืช ื•ืฉื™ื˜ื•ืช ื“ืจื™ืฉื•ืช ืชืคืงื•ื“ ื‘ื“ื™ืงื”

EN 748 ---

104 A T Goals for youth Football,

Futsal, Mini-Soccer and Small-sided Football

ืฉืขืจื™ ื›ื“ื•ืจื’ืœ ืœื ื•ืขืจ, ืงื˜ืจื’ืœ, ืžื™ื ื™ ื›ื“ื•ืจื’ืœ ื•ื›ื“ื•ืจื’ืœ ืงื˜ืŸ

ืฆื“ื“ื™

Functional and safety requirements

and test methods

ื“ืจื™ืฉื•ืช ืชืคืงื•ื“ ื•ื‘ื˜ื™ื—ื•ืช ื•ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื”

BS 8462:2005 Annex B ---

105 A T Handball goals ืฉืขืจื™ ื›ื“ื•ืจื™ื“ Functional and safety requirements

and test methods

ื“ืจื™ืฉื•ืช ืชืคืงื•ื“ ื•ื‘ื˜ื™ื—ื•ืช ื•ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื”

EN 749 ---

106 A P;T Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Testing of surface hardness using a

rebound hammer

ืฉื˜ื— ื”ืคื ื™ื ื‘ื“ื™ืงืช ืงืฉื™ื•ืช ื‘ืืžืฆืขื•ืช ืคื˜ื™ืฉ ืจืชืข

SI 26 part 7 section 201 ---

Based on: Schmidt method

107 A T Non detachable suspended

ceiling of Gypsum board

ืชืงืจื•ืช ืชื•ืชื‘ ืœื ืคืจื™ืงื•ืช ืžืœื•ื—ื•ืช ื’ื‘ืก

Installation test only ื‘ื“ื™ืงื•ืช ื”ืชืงื ื” ื‘ืœื‘ื“ SI 1924 ---

108 A P;T Piles ื›ืœื•ื ืกืื•ืช Integrity testing by ultrasonic

crosshole testing

ืงื•ืœื™ืช -ื‘ื“ื™ืงืช ืจืฆื™ืคื•ืช ื‘ืฉื™ื˜ื” ืขืœ )ืื•ืœื˜ืจืกื•ื ื™ืช(

In house procedure ---

109 A P;T Piles ื›ืœื•ื ืกืื•ืช Low strain integrity testing ื‘ื“ื™ืงืช ืจืฆื™ืคื•ืช ื‘ืฉื™ื˜ื” ื”ื“- ืงื•ืœื™ืช )ืกื•ื ื™ืช(

In house procedure ---

PEM Only

110 A T Slabs and beams of reinforced

and prestressed concrete

ื‘ื˜ื•ืŸ ืขืฉื•ื™ื•ืช ื•ืงื•ืจื•ืช ืชืงืจื•ืช ื“ืจื•ืš ื•ื‘ื˜ื•ืŸ ืžื–ื•ื™ืŸ

Load test ื ื™ืกื•ื™ ื”ืขืžืกื” SI 252 ---

111 A T Sport equipment: Basketball ืฆื™ื•ื“ ืกืคื•ืจื˜: ืฆื™ื•ื“ ื›ื“ื•ืจืกืœ Functional and safety requirements

and test methods โ€“ Installation only

ื“ืจื™ืฉื•ืช ืชืคืงื•ื“ ื•ื‘ื˜ื™ื—ื•ืช ื•ืฉื™ื˜ื•ืช ื”ืชืงื ื” ื‘ืœื‘ื“ -ื‘ื“ื™ืงื”

SI 5515 part 1

Excluding section 5.3

---

112 A T Sport equipment: Gymnastic

equipment โ€“ Rings

ืฆื™ื•ื“ ืกืคื•ืจื˜: ืฆื™ื•ื“ ื˜ื‘ืขื•ืช โ€“ื”ืชืขืžืœื•ืช

Functional and safety requirements

and test methods

ืชืคืงื•ื“ ื•ื‘ื˜ื™ื—ื•ืช ื•ืฉื™ื˜ื•ืช ื“ืจื™ืฉื•ืช ื‘ื“ื™ืงื”

SI 5515 part 4

Excluding section 6.2.2

---

113 A T Sport equipment: Volleyball

Functional and safety requirements ืฆื™ื•ื“ ืกืคื•ืจื˜: ืฆื™ื•ื“ ื›ื“ื•ืจ ืขืฃ

and test methods

ื“ืจื™ืฉื•ืช ืชืคืงื•ื“ ื•ื‘ื˜ื™ื—ื•ืช ื•ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื”

SI 5515 part 2

Excluding section 4.2,

4.4

---

Page 17: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 17 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Engineering Items - Buildings, Constructions, Infrastructure and

Concrete

ืžื‘ื ื™ื, ืชืฉืชื™ื•ืช ื•ื‘ื˜ื•ืŸ -ืคืจื™ื˜ื™ื ื”ื ื“ืกื™ื™ื ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

Non Destructive Tests ื‘ื“ื™ืงื•ืช ืœื ื”ื•ืจืกื•ืช

114 A T Sport equipment:Ropes

Functional and safety requirements ืฆื™ื•ื“ ืกืคื•ืจื˜: ื—ื‘ืœื™ื

and test methods

ื“ืจื™ืฉื•ืช ืชืคืงื•ื“ ื•ื‘ื˜ื™ื—ื•ืช ื•ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื”

SI 5515 Appendix B ---

115 A T Sport equipment:Ropes

Gymnastic equipment-Ladders

ืฆื™ื•ื“ ืกืคื•ืจื˜: ืฆื™ื•ื“ ืกื•ืœืžื•ืช -ื”ืชืขืžืœื•ืช

Safety requirements and test

methods

SI 5515 part 3 ื“ืจื™ืฉื•ืช ื‘ื˜ื™ื—ื•ืช ื•ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื”

Excluding section 5.1

---

Page 18: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 18 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Engineering Items - Buildings, Constructions, Infrastructure and

Concrete

ืžื‘ื ื™ื, ืชืฉืชื™ื•ืช ื•ื‘ื˜ื•ืŸ -ืคืจื™ื˜ื™ื ื”ื ื“ืกื™ื™ื ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

Physical and Engineering Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช ื•ื”ื ื“ืกื™ื•ืช

116 A T Suspended detachable ceiling ืชืงืจื•ืช ืชื•ืชื‘ ืคืจื™ืงื•ืช Code of practice for design -

Installation test only

ื‘ื“ื™ืงื•ืช ื”ืชืงื ื” โ€“ื›ืœืœื™ ืชื›ืŸ ื‘ืœื‘ื“

SI 5103 part 1 ---

117 A T Suspended detachable ceiling ืชืงืจื•ืช ืชื•ืชื‘ ืคืจื™ืงื•ืช Code of practice for installation

and maintenance - Installation test

only

ื‘ื“ื™ืงื•ืช -ื›ืœืœื™ ื”ืชืงื ื” ื•ืชื—ื–ื•ืงื” ื”ืชืงื ื” ื‘ืœื‘ื“

SI 5103 part 3

---

118 A T Suspended detachable ceiling ืชืงืจื•ืช ืชื•ืชื‘ ืคืจื™ืงื•ืช Code of practice for the design and

installation in shelters and protected areas - Installation test

only

ื•ื”ืชืงื ื” ื‘ืžืงืœื˜ื™ื ื›ืœืœื™ ืชื›ืŸ ื‘ื“ื™ืงื•ืช -ื•ืžืจื—ื‘ื™ื ืžื•ื’ื ื™ื

ื”ืชืงื ื” ื‘ืœื‘ื“

SI 5103 part 4

---

Page 19: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 19 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Engineering items - Buildings, Constructions, Infrastructure

and Concrete

ืžื‘ื ื™ื, ืชืฉืชื™ื•ืช ื•ื‘ื˜ื•ืŸ -ืคืจื™ื˜ื™ื ื”ื ื“ืกื™ื™ื ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

Non Destructive Tests, Testing PAL-CAL Ceiling Components in Structures ื‘ื“ื™ืงื•ืช ืžืจื›ื™ื‘ื™ ืคืœืงืœ ื‘ืžื‘ื ื™ื, ื‘ื“ื™ืงื•ืช ืœื ื”ื•ืจืกื•ืช

119 A T Structure ืžื‘ื ื™ื Ground Penetrating Radar (GPR) for

testing PAL-CAL ceiling ( GPRืจื“ืืจ ื—ื•ื“ืจ ืงืจืงืข ) ืงืœ.-ืœื‘ื“ื™ืงืช ืชืงืจื•ืช ืคืœ

ISRACโ€™S Instruction No. 1-TR-0012

(Instruction for testing PAL-CAL ceiling

components)

---

120 A T Structure ืžื‘ื ื™ื Perphometer for testing PAL-CAL ceiling ืœื‘ื“ื™ืงืช ืชืงืจื•ืช ืคืœ ืคืจื•ืคื•ืžื˜ืจ- ืงืœ.

ISRACโ€™S Instruction No. 1-TR-0012

(Instruction for testing PAL-CAL ceiling components)

---

121 A T Structure ืžื‘ื ื™ื Steel for the reinforcement of concrete-

Diameter test (By exposure and direct

measure) for testing PAL-CAL ceiling

ื‘ื“ื™ืงื” ืฉืœ ืงื•ื˜ืจ ืžื•ื˜ื•ืช ื‘ืจื–ืœ ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ ืข"ื™ ื—ื™ืฉื•ืฃ ื•ืžื“ื™ื“ื”

ืงืœ.-ื™ืฉื™ืจื” ืฉืœ ืชืงืจื•ืช ืคืœ

ISRACโ€™S Instruction No. 1-TR-0012

(Instruction for testing PAL-CAL ceiling

components)

---

122 A T Structure ืžื‘ื ื™ื Thermograph imaging for testing PAL-

CAL ceiling

ืฆื™ืœื•ื ืชืจืžื•ื’ืจืคื™ ืœื‘ื“ื™ืงืช ืชืงืจื•ืช ืงืœ.-ืคืœ

ISRACโ€™S Instruction No. 1-TR-0012

(Instruction for testing PAL-CAL ceiling

components)

---

Page 20: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 20 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Environment - Soil :ืงืจืงืข -ืื™ื›ื•ืช ืกื‘ื™ื‘ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Soil Sampling, Generic Soil ืงืจืงืข, ืงืจืงืข ื›ืœืœื™ ื“ื™ื’ื•ื

123 A T Soil ืงืจืงืข Non organic materials ืžื“ื™ื ืช ื™ืฉืจืืœ, ื”ืžืฉืจื“ ืœื”ื’ื ืช ื”ืกื‘ื™ื‘ื”, ืื’ืฃ ื—ื•ืžืจื™ื ืœื ืื•ืจื’ื ื™ืืฉืคื›ื™ ืชืขืฉื™ื™ื”, ื“ืœืงื™ื ื•ืงืจืงืขื•ืช ืžื–ื•ื”ืžื•ืช,

ื”ื ื—ื™ื•ืช ืžืงืฆื•ืขื™ื•ืช ืœื‘ื™ืฆื•ืข ืกืงืจ ืงืจืงืข---

124 A T Soil ืงืจืงืข Non Volatile Meterials ืžื“ื™ื ืช ื™ืฉืจืืœ, ื”ืžืฉืจื“ ืœื”ื’ื ืช ื”ืกื‘ื™ื‘ื”, ืื’ืฃ ื—ื•ืžืจื™ื ืฉืื™ื ื ื ื“ื™ืคื™ืื•ืงืจืงืขื•ืช ืžื–ื•ื”ืžื•ืช, ืฉืคื›ื™ ืชืขืฉื™ื™ื”, ื“ืœืงื™ื

ื”ื ื—ื™ื•ืช ืžืงืฆื•ืขื™ื•ืช ืœื‘ื™ืฆื•ืข ืกืงืจ ืงืจืงืข---

125 A T Soil ืงืจืงืข SVOC-Semi Volatile Organic Carbone ืžื“ื™ื ืช ื™ืฉืจืืœ, ื”ืžืฉืจื“ ืœื”ื’ื ืช ื”ืกื‘ื™ื‘ื”, ืื’ืฃ ื—ื•ืžืจื™ื ืืจื’ื ื™ื ื—ืฆื™ ื ื“ื™ืคื™ืืฉืคื›ื™ ืชืขืฉื™ื™ื”, ื“ืœืงื™ื ื•ืงืจืงืขื•ืช ืžื–ื•ื”ืžื•ืช,

ื”ื ื—ื™ื•ืช ืžืงืฆื•ืขื™ื•ืช ืœื‘ื™ืฆื•ืข ืกืงืจ ืงืจืงืข ---

126 A T Soil ืงืจืงืข VOC - Volatile Organic Carbone ืžื“ื™ื ืช ื™ืฉืจืืœ, ื”ืžืฉืจื“ ืœื”ื’ื ืช ื”ืกื‘ื™ื‘ื”, ืื’ืฃ ื—ื•ืžืจื™ื ืื•ืจื’ื ื™ื ื ื“ื™ืคื™ืืฉืคื›ื™ ืชืขืฉื™ื™ื”, ื“ืœืงื™ื ื•ืงืจืงืขื•ืช ืžื–ื•ื”ืžื•ืช,

ื”ื ื—ื™ื•ืช ืžืงืฆื•ืขื™ื•ืช ืœื‘ื™ืฆื•ืข ืกืงืจ ืงืจืงืข ---

127 A T Soil ืงืจืงืข VOC - Volatile Organic Carbone ืžื“ื™ื ืช ื™ืฉืจืืœ, ื”ืžืฉืจื“ ืœื”ื’ื ืช ื”ืกื‘ื™ื‘ื”, ืื’ืฃ ื—ื•ืžืจื™ื ืื•ืจื’ื ื™ื ื ื“ื™ืคื™ืืฉืคื›ื™ ืชืขืฉื™ื™ื”, ื“ืœืงื™ื ื•ืงืจืงืขื•ืช ืžื–ื•ื”ืžื•ืช,

ื”ื ื—ื™ื•ืช ืžืงืฆื•ืขื™ื•ืช ืœื‘ื™ืฆื•ืข ืกืงืจ ืงืจืงืข ---

Page 21: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 21 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Environment - Soil :ืงืจืงืข -ืื™ื›ื•ืช ืกื‘ื™ื‘ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Soil Gas Sampling, Soil Active Gas Sampling ื“ื™ื’ื•ื ื’ื– ืืงื˜ื™ื‘ื™ื“ื™ื’ื•ื ืื•ื™ืจ ื‘ืงืจืงืข ,

128 A T Active gas ื’ื– ืืงื˜ื™ื‘ื™ SVOC-Semi Volatile Organic Carbone ืžื“ื™ื ืช ื™ืฉืจืืœ, ื”ืžืฉืจื“ ืœื”ื’ื ืช ื”ืกื‘ื™ื‘ื”, ื”ื ื—ื™ื•ืช ื—ืฆื™ ื ื“ื™ืคื™ืื—ื•ืžืจื™ื ืื•ืจื’ื ื™ืืื’ืฃ ืฉืคื›ื™ ืชืขืฉื™ื”, ื“ืœืงื™ื ื•ืงืจืงืขื•ืช ืžื–ื•ื”ืžื•ืช

ืœื“ื™ื’ื•ื ื’ื– ืงืจืงืข ื‘ืฉื™ื˜ื•ืช ืืงื˜ื™ื‘ื™ื•ืช---

129 A T Active gas ื’ื– ืืงื˜ื™ื‘ื™ VOC - Volatile Organic Carbone ืžื“ื™ื ืช ื™ืฉืจืืœ, ื”ืžืฉืจื“ ืœื”ื’ื ืช ื”ืกื‘ื™ื‘ื”, ื”ื ื—ื™ื•ืช ื—ื•ืžืจื™ื ืื•ืจื’ื ื™ื ื ื“ื™ืคื™ืืื’ืฃ ืฉืคื›ื™ ืชืขืฉื™ื”, ื“ืœืงื™ื ื•ืงืจืงืขื•ืช ืžื–ื•ื”ืžื•ืช

ืœื“ื™ื’ื•ื ื’ื– ืงืจืงืข ื‘ืฉื™ื˜ื•ืช ืืงื˜ื™ื‘ื™ื•ืช---

Page 22: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 22 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Enviroment - Soil, Aggregates and Water :ืงืจืงืข ืื’ืจื’ื˜ื™ื ื•ืžื™ื -ืื™ื›ื•ืช ืกื‘ื™ื‘ื”ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical Testing, Classical Chemistry, Wet Chemistry Measurements ืžื“ื™ื“ื•ืช ื›ื™ืžื™ื” ืจื˜ื•ื‘ื”, ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช, ื›ื™ืžื™ื” ืงืœืืกื™ืช

130 A P Soil ืงืจืงืข Determination of the pH value ืงื‘ื™ืขืช ืขืจืš ื”ื”ื’ื‘ื” BS 1377 part 3; Section

9 ---

131 A P Soil ืงืจืงืข Determination of carbonate

content (by rapid titration

method)

BS ืงื‘ื™ืขืช ืชื›ื•ืœืช ื”ืงืจื‘ื•ื ื˜ 1377 part 3; Section

6 ---

132 A P Soil ืงืจืงืข Determination of sulfate content

of soil and ground water

ืงื‘ื™ืขืช ืชื›ื•ืœืช ื”ื’ื•ืคืจื™ืช ื‘ืงืจืงืข (SO 3)ื•ืžื™ ืชื”ื•ื

BS 1377 part 3; Section

5.3; 5.5 ---

133 A P Soil ืงืจืงืข Determination of the mass loss on

ignition

ืงื‘ื™ืขืช ืื™ื‘ื•ื“ ืžืฉืงืœ ื‘ืงืœื™ื”

)ืฉืœ ื—ื•ืžืจ ืื•ืจื’ื ื™ ื‘ืงืจืงืข(

BS 1377 part 3; Section 4 ---

134 A P Soil ืงืจืงืข Determination of water โ€“ soluble

chloride content

ืงื‘ื™ืขืช ืชื›ื•ืœืช ื›ืœื•ืจื™ื“ ืžืกื™ืก ื‘ืžื™ื

BS 1377 part 3; Section

7.2 ---

Page 23: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 23 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Environment - Soil, Aggregates and Water :ื˜ื™ื ื•ืžื™ืืืื’ืจื’ ,ืงืจืงืข -ืื™ื›ื•ืช ืกื‘ื™ื‘ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical Testing, Chromatography ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช, ื›ืจื•ืžื˜ื•ื’ืจืคื™ื”

135 A T Landfill and

soil gas

ื’ื– ืžื˜ืžื ื•ืช ืงืจืงืข ื•ื’ื–

Total VOC's

Mapping landfill gas and temperature at a waste disposal site.

Measurement of landfill gas and soil

gas content in pipes

ื›ืœืœ ื—ื•ืžืจื™ื ืื•ืจื’ื ื™ื™ื ื ื“ื™ืคื™ืืžื™ืคื•ื™ ื’ื– ืžื˜ืžื ื•ืช ื•ื˜ืžืคืจื˜ื•ืจืช ื”ืงืจืงืข ื‘ืืชืจื™ ืกื™ืœื•ืง ืคืกื•ืœืช.

ืžื“ื™ื“ื•ืช ื”ืจื›ื‘ ื’ื– ืžื˜ืžื ื•ืช ื•ื’ื–

ื‘ืฆื™ื ื•ืจื•ืชืงืจืงืข

Mobile PID device or equivalent --- PID = Photo Ionization Detector

136 A T Soil gas ื’ื– ืงืจืงืข Chemical contaminants: Soil Gas

Sampling โ€“ Monitor Wells

(Measurement)

ื’ื–ื™ ืžื˜ืžื ื•ืช )ื—ืžืžื”( ืžื“ื™ื“ืช ื”ืจื›ื‘ ืžื‘ืืจื•ืช ื ื™ื˜ื•ืจ ื’ื– ื‘ืืชืจื™ ืคืกื•ืœืช

ื›ืžื–ื•ื”ืžื™ื. ื”ื—ืฉื•ื“ื™ื ื•ื‘ืืชืจื™ื

EPA-SOP 2042 (Expect 7.1; 7.5)

Mobile Gas Analyzer Only.

Relative value measurement: gas

content in %

--- Gases: CH4, CO, CO2, H2S and O2

Except soil gas well installation & summa

canister sampling

137 A T Soil gas ื’ื– ืงืจืงืข Chemical contaminants: Soil Gas

Sampling and Measurement

ื’ื–ื™ ืžื˜ืžื ื•ืช )ื—ืžืžื”( ืžื“ื™ื“ืช ื”ืจื›ื‘ ืžืคื ื™ ื”ืฉื˜ื— ื‘ืืชืจื™ ื”ื ืคืœื˜ื™ื ื”ื—ืฉื•ื“ื™ื ื•ื‘ืืชืจื™ืื”ื˜ืžื ื”

ื›ืžื–ื•ื”ืžื™ื.

EPA-SOP 2042 (Expect 7.1; 7.5)

Mobile Gas Analyzer Only.

Relative value measurement: gas

content in %

--- Gases: CH4, CO, CO2, H2S and O2

Except soil gas well installation & summa

canister sampling

138 A T Soil ืงืจืงืข Mapping of landfill gases and sub

strata temperatures for underground burns assessments in the waste body

at landfill sites.

ืžื˜ืžื•ื ื•ืช ื™ ื—ืžืžื” /ืžื™ืคื•ื™ ื’ื–ื•ืชืช ื”ืงืจืงืข ืœืžื˜ืจื•ืช ืจื˜ื•ืจื•ืชื•ื˜ืžืค

ืขืจ ืื™ืชื•ืจ ื•ืกืงืจื™ ื‘ื’ื•ืฃ ื”ืคืกื•ืœืช ื•ืชื‘ ืžื˜ืžื ื•ืช.ื‘ืืชืจื™

In house procedure --- According to ministry of Environmental

Protection for Mapping of landfill gas and soil temperature at landfill sites.

ืคืจื•ื˜ื•ืงื•ืœ ื”ืžืฉืจื“ ืœืื™ื›ื•ืช ื”ืกื‘ื™ื‘ื”, ืื’ืฃ ืคืกื•ืœืช ืžื™ืคื•ื™ ื’ื– ืžื˜ืžื•ื ืช ื•ื˜ืžืคืจื˜ื•ืจืช ืงืจืงืข -ื”ืžื•ืฆืงืช

.ื‘ืืชืจื™ ืกื™ืœื•ืง ืคืกื•ืœืช

139 A T Soil ืงืจืงืข Soil Temperature Measurements ืžื“ื™ื“ืช ื˜ืžืคืจื˜ื•ืจื” ื‘ืืชืจื™ ื”ื˜ืžื ืช ืคืกื•ืœืช ื•ื‘ืžืฉื˜ื—ื™ ืงื•ืžืคื•ืกื˜ืฆื™ื”

In house procedure

--- According to ministry of Environmental

Protection for Mapping of landfill gas and soil temperature in waste disposal site

ืคืจื•ื˜ื•ืงื•ืœ ื”ืžืฉืจื“ ืœืื™ื›ื•ืช ื”ืกื‘ื™ื‘ื”, ืื’ืฃ ืคืกื•ืœืช ืžื™ืคื•ื™ ื’ื– ืžื˜ืžื•ื ืช ื•ื˜ืžืคืจื˜ื•ืจืช ืงืจืงืข -ื”ืžื•ืฆืงืช

ื‘ืืชืจื™ ืกื™ืœื•ืง ืคืกื•ืœืช

Page 24: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 24 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Environment - Soil, Aggregates and Water :ื˜ื™ื ื•ืžื™ืืืื’ืจื’ ,ืงืจืงืข -ืื™ื›ื•ืช ืกื‘ื™ื‘ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical Testing, Chromatography ,GC/MS ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช, ื›ืจื•ืžื˜ื•ื’ืจืคื™ื”,GC/MS

140 A P Soil ืงืจืงืข SVOC ืื•ืจื’ื ื™ื•ืช ื—ืฆื™ ื ื“ื™ืคื•ืชืชืจื›ื•ื‘ื•ืช EPA 8270-D --- SVOC = Semi Volatile organic compounds

Compounds: Acenaphtene, Acenaphtyene, Aniline,

Anthracene, Azobenzene, Benzaanthracene,

Benzo(a)pyrene, Benzo(b)fluorathene, Benzo(g,h,i)pyrelene, Benzo(k)fluoranthene,

Benzyl_Butyl_phtalate, Benzyl-alcohol,

bis(2-chloroethoxy)methane, Bis(2-chloroethyl)ether, Bis(2-chloroisopropyl)ether, Bis(2-ethylhexyl)adipate,

Bis-(2-ethylhexyl)phthalate, 4-Bromophenyl phenyl

ether,

Carbazole4-Chloro 3-Methylphenol,

4-Chloroaniline, 2-Chloronaphtalene, 2-Chlorophenol,

4-Chlorophenyl phenyl ether, Chryzene, Dibenzo(a,h)antracene, Dibenzofuran,

1,2-Dichlorobenzene, 1,3-Dichlorobenzene,

1,4-Dichlorobenzene, 1,4-Dichlorophenol, Diethylphtalate, 2,4-Dimethylphenol,

1,3-Dimethylphtalate, 1,2-Dinitrobenzene,

1,4-Dinitrobenzene, Dinitro-o-cresol, 2,4-Dinitrotoluene, 2,4-Dinitrophenol,

2,6-Dinitrotoluene, Di-n-octyl-phtalate, Diphenylamine,

Dipropylamine,N-nitrozo, Fluoranthene, Fluorene,

Hexachlorabutadiene, Hexachlorobenzene,

Hexachlorocyclopentadiene, Hexachloroethane,

Indeno(1,2,3-cd)pyrene, Isophorone, 1-Methylnaphtalene, 2-Methylnaphtalene,

3-Methyl phenol(m-cresol), Naphtalene, 3-Nitroaniline,

Nitrobenzene, 2-Nitrophenol, 4-Nitrophenol, o-Nitroaniline, Phenanthrene, Phenol,

Phenol-2-methyl(o-cresol), p-Nitroaniline, Pyrene,

2,3,4,6-Tetrachlorophenol, 2,3,5,6-Tetrachlorophenol, 1,2,4-Trichlorobenzene, 2,4,5-Trichlorophenol,

2,4,6-Trichlorophenol

Page 25: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 25 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Environment - Soil, Aggregates and Water :ื˜ื™ื ื•ืžื™ืืืื’ืจื’ ,ืงืจืงืข -ืื™ื›ื•ืช ืกื‘ื™ื‘ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical Testing, Chromatography ,GC/MS ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช, ื›ืจื•ืžื˜ื•ื’ืจืคื™ื”,GC/MS

141 A P Soil ืงืจืงืข VOC ืชืจื›ื•ื‘ื•ืช ืื•ืจื’ื ื™ื•ืช ื ื“ื™ืคื•ืช EPA 8260-C --- VOC = Volatile organic compounds

142 A P Waste water ืžื™ ืฉืคื›ื™ื VOC ืชืจื›ื•ื‘ื•ืช ืื•ืจื’ื ื™ื•ืช ื ื“ื™ืคื•ืช EPA 8260-C ---

143 A P Aggregates ืื’ืจื’ื˜ื™ื VOC ืชืจื›ื•ื‘ื•ืช ืื•ืจื’ื ื™ื•ืช ื ื“ื™ืคื•ืช EPA 8260-C ---

Page 26: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 26 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and Paving :ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Foundation Engineering ื‘ื™ืกื•ืก ื”ืžื‘ื ื”

144 A P Cohesive soils ืงื•ื”ื–ื™ื‘ื™ื•ืช ืงืจืงืขื•ืช Consolidated undrained triaxial compression test

(CU)

ืžืจื—ื‘ื™ืช ื‘ืœืชื™ ืžื ื•ืงื–ืช ืœืื—ืจ ื’ื–ื™ืจื” (CU) ืงื•ื ืกื•ืœื™ื“ืฆื™ื”

ASTM-D-4767 ---

145 A P Cohesive soils ืงืจืงืขื•ืช ืงื•ื”ื–ื™ื‘ื™ื•ืช Hydraulic conductivity using a flexible wall

permeameter

ื’ื–ื™ืจื” ืžื•ืœื™ื›ื•ืช ื”ื™ื“ืจืื•ืœื™ืช ื‘ืชื ื‘ื“ื™ืงืช ืขื ื“ื•ืคืŸ ืจื›ื”ืžืจื—ื‘ื™ืช

ASTM-D-5084 ---

146 A P Cohesive soils ืงืจืงืขื•ืช ืงื•ื”ื–ื™ื‘ื™ื•ืช Measurement of hydraulic conductivity using a rigid-

wall, compaction-mold permeameter

ื‘ืฆื•ืจืช ื‘ืชื ื”ื™ื“ืจืื•ืœื™ืช ืžื•ืœื™ื›ื•ืช ื‘ื“ื™ืงืช ืงืฉื™ื—ื” ื“ื•ืคืŸ ืขื ื”ื™ื“ื•ืง ื’ืœื™ืœ

ASTM-D-5856 ---

147 A P Cohesive soils ืงื•ื”ื–ื™ื‘ื™ื•ืช ืงืจืงืขื•ืช One-dimensional swell or settlement potential ื—ื“ ืฆื™ืจื™ืช ืฉืงื™ืขื”ืœืชืคื™ื—ื” ืื• ืœืคื•ื˜ื ืฆื™ืืœ ASTM-D-4546 ---

148 A P Cohesive soils ืงื•ื”ื–ื™ื‘ื™ื•ืช ืงืจืงืขื•ืช Unconfined compressive strength ื”ืœื—ื™ืฆื” ื‘ืœื ื›ืœื•ื ื—ื•ื–ืง ASTM-D-2166 ---

149 A P Cohesive soils ืงื•ื”ื–ื™ื‘ื™ื•ืช ืงืจืงืขื•ืช Unconsolidated-undrained triaxial compression test

(QU)

ืžืจื—ื‘ื™ืช ื‘ืœืชื™ ืžื ื•ืงื–ืช ืœืœื ื’ื–ื™ืจื” (QU) ืงื•ื ืกื•ืœื™ื“ืฆื™ื”

ASTM-D-2850 ---

150 A P Granular Soils ื’ืจื ื•ืœืจื™ื•ืช ืงืจืงืขื•ืช Permeability (Constant head) ืงื‘ื•ืข ืขื•ืžื“ ื‘ืฉื™ื˜ืชืœืžื™ื ื—ื“ื™ืจื•ืช ASTM-D-2434 ---

151 A P Intact Rock Core

Specimens

Elastic moduli in triaxial compression without pore ืฉืœืžื™ื ืกืœืข ื’ืœืขื™ื ื™

pressure measurement

ื’ื–ื™ืจื” ื‘ื‘ื“ื™ืงืช ืืœืกื˜ื™ื•ืช ืžื•ื“ื•ืœ ืงื‘ื™ืขืช ื ืงื‘ื•ื‘ื™ื ืžื™ ืœื—ืฅ ืžื“ื™ื“ืช ืœืœื ืžืจื—ื‘ื™ืช

ASTM-D-7012

method B ---

152 A P Intact Rock Core

specimens

ืœื—ื™ืฆื” ื—ื•ื–ืง ื‘ื‘ื“ื™ืงืช ืืœืกื˜ื™ื•ืช ื™ืžื•ื“ื•ืœ Elastic moduli in uniaxial compression test ืฉืœืžื™ื ืกืœืข ื’ืœืขื™ื ื™ ื›ืœื•ื ื‘ืœื

ASTM-D-7012

method D ---

153 A P Intact rock core

specimens

ASTM-D-3967 ืœืžืชื™ื—ื” ื‘ื‘ืงื™ืขื” ื—ื•ื–ืง Splitting tensile strength ืฉืœืžื™ื ื’ืœืขื™ื ื™ ืกืœืข---

154 A P Intact rock core

specimens

ASTM-D-7012 ื”ืœื—ื™ืฆื” ื‘ืœื ื›ืœื•ื ื—ื•ื–ืง Unconfined compressive strength ืฉืœืžื™ื ืกืœืข ื’ืœืขื™ื ื™

method C ---

155 A T Paved and UnPaved

Surfaces

ืžืฉื˜ื—ื™ื ืกืœื•ืœื™ื ื•ืœื ืกืœื•ืœื™ื

Deflections with a Falling-Weight-Type Impulse

Load Device.

ืžื“ื™ื“ืช ืื’ื ื™ ืฉืงื™ืขื•ืช ื‘ืฉื™ื˜ืช ื”ืžืฉืงื•ืœืช ื”ื ื•ืคืœืช

ASTM-D-4694 ---

156 A T Paved and UnPaved

Surfaces

ืžืฉื˜ื—ื™ื ืกืœื•ืœื™ื ื•ืœื ืกืœื•ืœื™ื

Standard Guide for General Pavement Deflection

Measurements

ASTM-D-4695 ื”ื ื—ื™ื•ืช ื›ืœืœื™ื•ืช ืœืžื“ื™ื“ืช ืฉืงื™ืขื” ื‘ืžื™ืกืขื•ืช ---

Page 27: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 27 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and Paving :ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Foundation Engineering ื‘ื™ืกื•ืก ื”ืžื‘ื ื”

157 A P Rock ืกืœืข Determination of pulse-travel time ืกื•ื ื™ืช ืžื”ื™ืจื•ืชืงื‘ื™ืขืช ASTM-D-2845

section 8.3 ---

158 A P Rock ืกืœืข Determination of the point load strength index ื ืงื•ื“ืชื™ ื—ื•ื–ืง ืื™ื ื“ืงืก ื‘ื“ื™ืงืช ASTM-D-5731 ---

159 A T Rock core ื’ืœืขื™ื ื™ ืกืœืข Core drilling and sampling for site investigation ืืชืจ ืœื—ืงื™ืจืช ืกืœืข ื’ืœืขื™ื ื™ ืงื™ื“ื•ื— ASTM-D-2113 ---

160 A P;T Rock core ืกืœืข ื’ืœืขื™ื ื™ Determining rock quality designation (RQD) ืกืœืข ื’ืœืขื™ื ื™ ืื™ื›ื•ืช ืœืงื‘ื™ืขืช ืฉื™ื˜ื” ASTM-D-6032 ---

161 A P Rock Core ืกืœืข ื’ืœืขื™ื ื™ Preparing and determining dimensional and shape

tolerances

ื”ื›ื ืช ื’ืœืขื™ื ื™ ืกืœืข ืœื‘ื“ื™ืงื•ืช ื•ื”ืชืืžืช ืขืžื™ื“ื•ืช ืœื“ืจื™ืฉื•ืช ื”ืชืงืŸ

ASTM-D-4543 ---

162 A T Rock core samples ื’ืœืขื™ื ื™ ืกืœืข ื“ื•ื’ืžืื•ืช Preserving and transporting ื•ื”ื•ื‘ืœื” ืืจื™ื–ื” ASTM-D-5079 ---

163 A P Rock Core Specimens ืฉืœืžื™ื ืกืœืข ื’ืœืขื™ื ื™ Triaxial compressive strength without pore pressure

measurements

ืžื“ื™ื“ืช ืœืœื ืžื ื•ืงื–ืช ื‘ืœืชื™ ืžืจื—ื‘ื™ืช ื’ื–ื™ืจื” ื ืงื‘ื•ื‘ื™ื ืžื™ ืœื—ืฅ

ASTM-D-7012

method A ---

164 A T Soil samples ืงืจืงืขืžื“ื’ืžื™ Preserving and transporting ื•ื”ื•ื‘ืœื” ืืจื™ื–ื” ASTM-D-4220 ---

165 A P Soils ืงืจืงืขื•ืช Direct shear test under consolidated drained

conditions

ASTM-D-3080 ืงื•ื ืกื•ืœื™ื“ืฆื™ื” ืœืื—ืจ ืžื ื•ืงื–ืช ื™ืฉื™ืจื” ื’ื–ื™ืจื”---

166 A T Soils ืงืจืงืขื•ืช Investigation and sampling by auger borings ื—ืงื™ืจืช ืœืฆืจื›ื™ ืื•ื’ืจ ืžืงื“ื— ื‘ืขื–ืจืช ื“ื’ื™ืžื” ืงืจืงืข

ASTM-D-1452 ---

167 A P Soils ืงืจืงืขื•ืช Measurement of collapse potential ืœื”ืชืžื•ื˜ื˜ื•ืช ืคื•ื˜ื ืฆื™ืืœ ืœืงื‘ื™ืขืช ื‘ื“ื™ืงื” (ืžื™ื™ื˜)

ASTM-D-5333 ---

168 A P Soils ืงืจืงืขื•ืช One-dimensional consolidation properties ื—ื“ ืฆื™ืจื™ืช ืงื•ื ืกื•ืœื™ื“ืฆื™ื” ASTM-D-2435 ---

169 A T Soils ืงืจืงืขื•ืช Thin-walled tube sampling for geotechnical purposes ืฆื™ื ื•ืจ ื™"ืข ืžื•ืคืจ ื‘ืœืชื™ ืงืจืงืข ืžื“ื’ื ื ื˜ื™ืœืช ืงื™ื“ื•ื— ืžื›ื•ื ืช ื‘ืขื–ืจืชื“ื•ืคืŸ ื“ืง

ASTM-D-1587 ---

170 A P Soils for civil

engineering purposes

ืœืžื˜ืจื•ืช ืงืจืงืขื•ืช ื”ื ื“ืกื™ื•ืช

Consolidated drained triaxial compression test with

measurement of volume change (CD)

ืงื•ื ืกื•ืœื“ืฆื™ื” ืœืื—ืจ ืžื ื•ืงื–ืช ืžืจื—ื‘ื™ืช ื’ื–ื™ืจื” (CD) ื ืคื— ืฉื™ื ื•ื™ ืžื“ื™ื“ืช ื›ื•ืœืœ

BS 1377 part 8

section 8 ---

Page 28: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 28 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and Paving - Asphalts and Bitumen :ื•ื‘ื™ื˜ื•ืžืŸืืกืคืœื˜ -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

171 A P;T Asphalt Binder ืฉื™ื›ื‘ื” -ืืกืคืœื˜ ืžืงืฉืจืช

Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

ื”ื–ื“ืงื ื•ืช ื‘ื™ื˜ื•ืžืŸ ืืกืคืœื˜ื™ PAV ืžื›ืฉื™ืจ ื‘ืืžืฆืขื•ืช

ASTM-D-6521 ---

ASTM= American Society for Testing and Materials

172 A P Asphalt Binder ืฉื™ื›ื‘ื” -ืืกืคืœื˜ ืžืงืฉืจืช

Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear

Rheometer (DSR)

ืฉืœ ื‘ื“ื™ืงืช ืชื›ื•ื ื•ืช ืจื™ืื•ืœื•ื’ื™ื•ืชื‘ื™ื˜ื•ืžืŸ ืืกืคืœื˜ื™ ืชื•ืš ืฉื™ืžื•ืฉ

ื‘ื’ื–ื™ืจื” ื“ื™ื ืืžื™ืช ื‘ืืžืฆืขื•ืช ืžื›ืฉื™ืจ DSR

ASTM-D-7175

---

Meet the requirement of SI 161

part 1

173 A P;T Asphalt Binder ืืกืคืœื˜-ืฉื™ื›ื‘ื” ืžืงืฉืจืช

Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-film Oven test)

ื”ืฉืคืขืช ื—ื™ืžื•ื ื•ืื•ื•ื™ืจ ืขืœ ื‘ื“ื™ืงืช ืกืจื˜ ื‘ื™ื˜ื•ืžืŸ ืืกืคืœื˜ื™ ื ืข

)ื‘ื“ื™ืงื” ื‘ืชื ื•ืจ ืฉืœ ืฉื›ื‘ื” ื“ืงื”(

ASTM-D-2872

--- Meet the requirement of SI 161

part 1

174 A P Asphalts (Bitumen) )ืืกืคืœื˜ )ื‘ื™ื˜ื•ืžืŸ Determination of optimal content ืื•ืคื˜ื™ืžืœื™ืช ื”ืงื‘ื™ืขืช ืชื›ื•ืœ Asphalt institute manual

ms. 2 ---

Asphalt mixtures design

175 A P;T Asphalts (Bitumen) )ืืกืคืœื˜ )ื‘ื™ื˜ื•ืžืŸ Quantitative extraction from bituminous

paving mixtures: Hot extraction

ื‘ื“ื™ืงืช ื”ืชื›ื•ืœื” ื”ื›ืžื•ืชื™ืช ื‘ืชืขืจื•ื‘ืช ืืกืคืœื˜ื™ืช: ืžื™ืฆื•ื™ ื—ื

ASTM-D-2172 Method

B ---

176 A P Bitumen for road

purposes: asphaltic

bitumen (asphalt

cement)

ื‘ื™ื˜ื•ืžืŸ ืœื›ื‘ื™ืฉื™ ืืกืคืœื˜: ื‘ื™ื˜ื•ืžืŸ

ืืกืคืœื˜ื™

All tests specified in the standard ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช SI 161 part 1

---

SI= Israeli Standards

177 A P Bitumen for road

purposes: asphaltic

bitumen (asphalt

cement)

ื‘ื™ื˜ื•ืžืŸ ืœื›ื‘ื™ืฉื™ ืืกืคืœื˜: ื‘ื™ื˜ื•ืžืŸ

ืืกืคืœื˜ื™

Determination of Stiffness and m- values

at Low Temperatures

ื‘ื˜ืžืค' mื•ืขืจื›ื™ ื‘ื“ื™ืงืช ืงืฉื™ื—ื•ืช ื ืžื•ื›ื”

SI 161 part 1 appendix

A part 2 ---

178 A P;T Bitumen sheets ื™ืจื™ืขืช ื‘ื™ื˜ื•ืžืŸ Sheet appearance; Dimensions; Tensile

and elongation properties; Tear resistance; Low temperature flexibility;

High temperature resistance of the sheet;

Water penetration under pressure; Resistance of static puncture; Strength

tensile (Shear) Joining of sheets

ื‘ื“ื™ืงืช ืžืจืื” ื”ื™ืจื™ืขื”, ืžื™ื“ื•ืช, ืžืชื™ื—ื” ื•ื”ืชืืจื›ื•ืช, ืชื›ื•ื ื•ืช

ื”ืชื ื’ื“ื•ืช ืœืงืจื™ืขื”, ื’ืžื™ืฉื•ืช ื‘ื˜ืžืค' ื ืžื•ื›ื”, ืขืžื™ื“ื•ืช ื”ื™ืจื™ืขื” ื‘ื˜ืžืค'

ื’ื‘ื•ื”ื”, ื—ื“ื™ืจื•ืช ืžื™ื ื‘ืœื—ืฅ, ืขืžื™ื“ื•ืช ื‘ื“ืงื™ืจื” ืกื˜ื˜ื™ืช, ื—ื•ื–ืง ื”ืžืชื™ื—ื”

)ื’ื–ื™ืจื”( ืฉืœ ื—ื™ื‘ื•ืจ ื”ื™ืจื™ืขื•ืช

SI 1430 part 3 chapter B section 2.2-2.7, 2.9-

2.10, 2.11.2

---

179 A T;T4 Bituminous materials ื—ื•ืžืจื™ื ื‘ื™ื˜ื•ืžื ื™ื Sampling ื ื˜ื™ืœืช ื”ืžื“ื’ื ื”ืžื™ื™ืฆื’ ASTM-D-140 section 9 ---

Mixed storage tanks

Page 29: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 29 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and Paving - Asphalts and Bitumen :ื•ื‘ื™ื˜ื•ืžืŸืืกืคืœื˜ -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

180 A P;P1;

P4

Bituminous mixture ืชืขืจื•ื‘ืช ื‘ื™ื˜ื•ืžื ื™ืช Resistance to plastic flow using Marshall

apparatus

ื”ืชื ื’ื“ื•ืช ืœื–ืจื™ืžื” ืคืœืกื˜ื™ืช ื‘ืฉื™ื˜ืช ืžืจืฉืœ

ASTM-D-6926-04

ASTM-D-6927-05 ---

181 A P;P1;

P2;P4;

Bituminous paving

mixtures

ืชืขืจื•ื‘ื•ืช ืกืœื™ืœื” ื‘ื™ื˜ื•ืžื ื™ื•ืช

Quantitative extraction from bituminous

paving mixtures: Cold extraction

ื‘ื“ื™ืงืช ื”ืชื›ื•ืœื” ื”ื›ืžื•ืชื™ืช ื‘ืชืขืจื•ื‘ืช ืืกืคืœื˜ื™ืช: ืžื™ืฆื•ื™ ืงืจ

ASTM-D-2172 Method

A ---

182 A P Bituminous paving

mixtures

ืชืขืจื•ื‘ื•ืช ืกืœื™ืœื” ื‘ื™ื˜ื•ืžื ื™ื•ืช

Quantitative extraction from bituminous

paving mixtures: Hot extraction

ื‘ื“ื™ืงืช ื”ืชื›ื•ืœื” ื”ื›ืžื•ืชื™ืช ื‘ืชืขืจื•ื‘ืช ืืกืคืœื˜ื™ืช: ืžื™ืฆื•ื™ ื—ื

BS 598 part 102 ---

BS= British Standards

183 A T Bituminous paving

mixtures

ืชืขืจื•ื‘ื•ืช ืกืœื™ืœื” ื‘ื™ื˜ื•ืžื ื™ื•ืช

Sampling ื”ืžื“ื’ื ื”ืžื™ื™ืฆื’ ื ื˜ื™ืœืช ASTM-D-979 ---

184 A P; P1;

P2; P4;

Bituminous paving

mixtures

ืชืขืจื•ื‘ื•ืช ืกืœื™ืœื” ื‘ื™ื˜ื•ืžื ื™ื•ืช

Theoretical maximum specific gravity and

density

ื”ืฆืคื™ืคื•ืช ืงื‘ื™ืขืช ืžืฉืงืœ ืกื’ื•ืœื™ ื• ื”ืžืงืกื™ืžืœื™ืช ื”ืชื™ืื•ืจื˜ื™ืช

ASTM-D-2041 ---

185 A P Compacted bituminous

mixtures

ืชืขืจื•ื‘ื•ืช ื‘ื™ื˜ื•ืžื ื™ื•ืช ืžื”ื•ื“ืงื•ืช

Bulk specific gravity and density ืกื’ื•ืœื™ ื•ืฆืคื™ืคื•ืชืžืฉืงืœ ASTM-D-1188 ---

186 A P Compacted Bituminous

Mixtures

ืชืขืจื•ื‘ื•ืช ื‘ื™ื˜ื•ืžื ื™ื•ืช ืžื”ื•ื“ืงื•ืช

Bulk Specific Gravity and Density Using

Automatic Vacuum Sealing Method

ืžืžืฉื™ืช ื•ืฆืคื™ืคื•ืช ืกื’ื•ืœื™ ืžืฉืงืœ ื•ืืงื•ืืื™ื˜ื•ื ื‘ื• ื‘ืฉื™ื˜ืช

ASTM-D6752 ---

51.04ื”ืžืคืจื˜ ื”ื›ืœืœื™ ืฉืœ ื ืช"ื™

187 A P Compacted bituminous

paving mixture

specimens

ื“ื•ื’ืžืื•ืช ืฉืœ ืชืขืจื•ื‘ื•ืช ืกืœื™ืœื” ื‘ื™ื˜ื•ืžื ื™ื•ืช

ืžื”ื•ื“ืงื•ืช

Thickness or height ืขื•ื‘ื™ ืื• ื’ื•ื‘ื” ASTM-D-3549

---

188 A P;T Existing and New

Pedestrian Surfaces

ืžืฉื˜ื—ื™ ื”ืœื™ื›ื” ืงื™ื™ืžื™ื ื•ื—ื“ืฉื™ื

Slip resistance Using the British

Pendulum Tester

ื‘ืืžืฆืขื•ืช ื”ืชื ื’ื“ื•ืช ืœื”ื—ืœืงื” ืžื˜ื•ื˜ืœืช ื‘ืจื™ื˜ื™ืช

SI 2279 Par. 1-5 ---

189 A P9 Gasoline ื‘ื ื–ื™ืŸ Research octane number of spark ignition

(RON)

ASTM-D-2699 ืžืกืคืจ ืื•ืงื˜ืŸ ื‘ืฉื™ื˜ืช ืžื—ืงืจ ---

190 A P;T;

P1;T1;

P2;T2;

P4;T4

Hot asphalt mixtures ืชืขืจื•ื‘ื•ืช ืืกืคืœื˜ื™ื•ืช ื—ืžื•ืช

Composition ื”ืจื›ื‘ SI 362

---

191 A P;P1;

P2;P4

Non-absorptive

compacted bituminous mixtures

ืชืขืจื•ื‘ื•ืช ืืกืคืœื˜ ื‘ื™ื˜ื•ืžื ื™ื•ืช ืœื ืกื•ืคื’ื•ืช

Bulk specific gravity and density ืžืฉืงืœ ืกื’ื•ืœื™ ื•ืฆืคื™ืคื•ืช ASTM-D-2726 ---

Page 30: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 30 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and Paving - Asphalts and Bitumen :ื•ื‘ื™ื˜ื•ืžืŸืืกืคืœื˜ -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

192 A T Paved roads, Subbases

and Crushed Graded

Aggregates

ืืกืคืœื˜ ื‘ืžื™ืกืขื•ืช, ืื’ื•"ืž, ืžืฆืข

Asphalt flatness ืžื™ืฉื•ืจื™ื•ืช ืืกืคืœื˜ In house procedure ---

Based on: ื”ืžืคืจื˜ ื”ื›ืœืœื™ ืฉืœ ื ืช"ื™51.04

193 P9 P9 Petroleum products ืžื•ืฆืจื™ ื ืคื˜ Corrosiveness to copper from petroleum

products by copper strip test

ื‘ื“ื™ืงืช ืงื•ืจื–ื™ื‘ื™ื•ืช ืœื ื—ื•ืฉืช ืฉืœ ืžื•ืฆืจื™ ื ืคื˜ ื‘ืขื–ืจืช ืคืก ื ื—ื•ืฉืช.

ASTM-D-130 ---

Meet the requirement of SI 90 part

2 and SI 107 part 1

194 P9 P9 Petroleum products

Distillation of petroleum products at ืžื•ืฆืจื™ ื ืคื˜ atmospheric pressure.

ื–ื™ืงื•ืง ืžื•ืฆืจื™ ื ืคื˜ ื‘ืœื—ืฅ ื‘ื“ื™ืงืช ืื˜ืžื•ืกืคืจื™.

ASTM-D-86 ---

Meet the requirement of SI 90 part

2 and SI 107 part 1

195 A P Petroleum products ืžื•ืฆืจื™ ื ืคื˜ Standard method for: density, relative

density (specific gravity) or API gravity

by hydrometer method

ASTM-D-1298 ื‘ื“ื™ืงืช ืฆืคื™ืคื•ืช ืžื•ืฆืจื™ ื ืคื˜.

---

Meet the requirement of SI 90 part

2 and SI 107 part 1

196 A T Soils and Pavement

Components

ืงืจืงืขื•ืช ื•ืžืจื›ื™ื‘ื™ ืžื™ืกืขื•ืช

Static Plate Load Tests ืกื˜ื˜ื™ื™ืืžื‘ื—ื ื™ ืคืœื˜ืช ื”ืขืžืกื” ASTM D1196 ---

197 A P;T Surfaces ืžืฉื˜ื—ื™ื Measuring Surface Frictional Properties

Using the British Pendulum Tester

ืžืืคื™ื™ื ื™ ื”ื—ื™ื›ื•ืš ืฉืœ ืžืฉื˜ื— ืžื“ื™ื“ืช ื‘ืืžืฆืขื•ืช ืžื˜ื•ื˜ืœืช ื‘ืจื™ื˜ื™ืช

ASTM E 303 ---

Page 31: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 31 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and Paving - Asphalts and Petroleum Products :ืืกืคืœื˜ ื•ืžื•ืฆืจื™ ื ืคื˜ -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical Testing, Spectroscopy, UV/Visible ืชื—ื•ื ื ืจืื”/ืกืคืงื˜ืจื•ืกืงื•ืคื™ื”, ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ,UV

198 A P Petroleum products

ืžื•ืฆืจื™ ื ืคื˜ Determination of total sulfur in light hydrocarbons, spark ignition

engine fuel, and engine oil by Ultraviolet Fluorescence.

ืงื‘ื™ืขืช ืชื›ื•ืœื” ื’ืคืจื™ืช ื‘ืžื•ืฆืจื™ ื ืคื˜ ืคืœื•ืื•ืจื•ืกื ืก UVื‘ืขื–ืจืช

ASTM-D-5453

---

Meet the requirement of SI 90 part 2

and SI 107 part 1

Page 32: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 32 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and paving - Soil, Aggregates and Water :ืงืจืงืข ืื’ืจื’ื˜ื™ื ื•ืžื™ื -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

199 A P;T Aggregates ืื’ืจื’ืื˜ื™ื Clay lumps and friable particles ืื—ื•ื– ื‘ื•ืœื™ ื—ืจืกื™ืช ASTM-C-142 ---

200 A P;T; Aggregates ืื’ืจื’ืื˜ื™ื Clay lumps and friable particles ืื—ื•ื– ื‘ื•ืœื™ ื—ืจืกื™ืช SI 1865 part 2 chapter 7 ---

Based on ASTM C 142 Meet the

requirement of SI 3

201 A P Aggregates ืื’ืจื’ืื˜ื™ื Determination crushing value

(ACV)

ื‘ืฉื™ื˜ื” ืงื‘ื™ืขืช ืฉื™ืขื•ืจ ื”ื’ืจื™ืกื•ืช ื”ื‘ืจื™ื˜ื™ืช

BS 812 part 110 ---

202 A P

Aggregates ืื’ืจื’ืื˜ื™ื Determination crushing value

(ACV)

ืงื‘ื™ืขืช ืฉื™ืขื•ืจ ื”ื’ืจื™ืกื•ืช ื‘ืฉื™ื˜ื” ื”ื‘ืจื™ื˜ื™ืช

SI 1865 part 2 chapter 9 ---

Based on BS 812 part 110 Meet

the requirement of SI 3

203 A P Aggregates ืื’ืจื’ื˜ื™ื Determination of ten per cent

fines value (TFV)

BS 812 Part 111 ื“ืงื™ื 10%ืงื‘ื™ืขืช ืขืจืš ---

204 A P:T Aggregates ืื’ืจื’ื˜ื™ื Determination of the resistance to

wear (Micro-Deval)

ืงื‘ื™ืขืช ืฉื™ืขื•ืจ ื”ื”ืชื ื’ื“ื•ืช ื“ื™ื•ื•ืœ(-ืœืฉื—ื™ืงื” )ืžื™ืงืจื•

BS EN 1-1097

---

Based on: BS EN 13450

205 A T;T1;

T2;T3;T4;T5;

T6;T7;

T8

Aggregates ืื’ืจื’ืื˜ื™ื Practice for sampling ื ื˜ื™ืœืช ืžื“ื’ืžื™ ืงืจืงืข ASTM-D-75

---

206 A T;T1;

T2;T3;T4; T5;

T6;T7;

T8

Aggregates ืื’ืจื’ืื˜ื™ื Practice for sampling

SI 1865 part 2 chapter 2 ื ื˜ื™ืœืช ืžื“ื’ืžื™ ืงืจืงืข

---

Based on ASTM D 75

Page 33: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 33 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and paving - Soil, Aggregates and Water :ืงืจืงืข ืื’ืจื’ื˜ื™ื ื•ืžื™ื -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

207 A P;T;

P1;T1; P2;T2;

P3;T3;

P4;T4; P5;T5;

P6;T6;

P7;T7; P8;T8

Aggregates ืื’ืจื’ืื˜ื™ื Reducing samples to testing size

ASTM-C-702 ื—ืฆื™ื™ืช ืžื“ื’ืžื™ ืงืจืงืข

---

208 A P;T;

P1;T1;

P2;T2;

P3;T3; P4;T4;

P5;T5;

P6;T6; P7;T7;

P8;T8

Aggregates ืื’ืจื’ืื˜ื™ื Reducing samples to testing size

ื”ื›ื ืช ื“ื•ื’ืžืื•ืช ื‘ื“ื™ืงื” )ื—ืฆื™ื™ืช ืžื“ื’ืžื™ื(

SI 1865 part 2 chapter 3

---

Based on ASTM C 702

209 A P Aggregates ืื’ืจื’ื˜ื™ื Saundess ืื™ืชื ื•ืช ASTM-C-88 ---

210 A P;T Coarse aggregate ื’ืก ืื’ืจื’ืื˜ Determination of particle shape:

elongation index

ืงื‘ื™ืขืช ืฆื•ืจืช ื”ื’ืจื’ื™ืจื™ื: ืžื“ื“ ื”ืžืื•ืจื›ื•ืช

BS 812 part 105.2 ---

211 A P; P1;

P2; P3;

P5; P6;

P7; P8

Coarse aggregates ื™ื ื’ืกื™ืืื’ืจื’ืื˜ Density, relative density (specific

gravity), and absorption

ASTM-C-127 ืฆืคื™ืคื•ืช, ืžืฉืงืœ ืกื’ื•ืœื™ ื•ืกืคื™ื’ื•ืช

---

212 A P;T;

Coarse aggregates ื™ื ื’ืกื™ืืื’ืจื’ืื˜ Determination of particle shape:

elongation index

ืงื‘ื™ืขืช ืฆื•ืจืช ื”ื’ืจื’ื™ืจื™ื: ืžื“ื“ ื”ืžืื•ืจื›ื•ืช

SI 1865 part 2 chapter

11 ---

Based on BS 812 part 105 sec 105.2

Meet the requirement of SI 3

213 A P;T;

Coarse aggregates ื’ืกื™ื ื™ืืื’ืจื’ืื˜

Determination of particle shape:

flakiness index

ืงื‘ื™ืขืช ืฆื•ืจืช ื”ื’ืจื’ื™ืจื™ื: ืžื“ื“ ื”ืคื—ื™ืกื•ืช

BS 812 part 105.1 ---

Page 34: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 34 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and paving - Soil, Aggregates and Water :ืงืจืงืข ืื’ืจื’ื˜ื™ื ื•ืžื™ื -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

214 A P;T;

Coarse aggregates ื™ื ื’ืกื™ืืื’ืจื’ืื˜ Determination of particle shape:

flakiness index

ืงื‘ื™ืขืช ืฆื•ืจืช ื”ื’ืจื’ื™ืจื™ื: ืžื“ื“ ื”ืคื—ื™ืกื•ืช

SI 1865 part 2 chapter

10 --- Based on BS 812 part 105 sec 105.1

Meet the requirement of SI 3

215 A P Coarse Aggregates ืื’ืจื’ื˜ ื’ืก Determining the Adherent Coating

on Coarse Aggregates

ืงื‘ื™ืขืช ื›ืžื•ืช ื”ื—ื•ืžืจ ื”ืžื•ื“ื‘ืง ืขืœ ืื’ืจื’ื˜ื™ื ื’ืกื™ื

ASTM-D-5711-03 ---

216 A T Cohesive soils ืงืจืงืขื•ืช ืงื•ื”ื–ื™ื‘ื™ื•ืช Field vane shear test ื‘ื“ื™ืงืช ืžื›ื ืฃ ืฉื“ื” ืœื’ื–ื™ืจื” ASTM-D-2573 ---

217 A P;T;

P1;T1;

P2;T2; P3;T3;

P4;T4;

P5;T5; P6;T6;

P7;T7;

P8;T8

Fine aggregates ื“ืงื™ื ืื’ืจื’ืื˜ื™ื Amount of material finer than the

no. 200 (75-um) sieve

ื“ืงื™ื ืขื•ื‘ืจื™ื ื ืคื” ื”ื›ืžื•ืช ืงื‘ื™ืขืช (200)ืžืกืคืจ ืžืง"ืž 75

SI 1865 part 2 chapter 6

---

Based on ASTM C117 Meet the

requirement of SI 3

218 A P;T;

P1;T1;

P2;T2;

P3;T3;

P4;T4;

P5;T5;

P6;T6; P7;T7;

P8;T8

Fine aggregates ืื’ืจื’ืื˜ื™ื ื“ืงื™ื Amount of material finer than the

no. 200 (75-um) sieve

ื“ืงื™ื ืขื•ื‘ืจื™ื ื ืคื” ื”ื›ืžื•ืช ืงื‘ื™ืขืช (200)ืžืกืคืจ ืžืง"ืž 75

ASTM-C-117

---

Page 35: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 35 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and paving - Soil, Aggregates and Water :ืงืจืงืข ืื’ืจื’ื˜ื™ื ื•ืžื™ื -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

219 A P;T;

P1;T1; P2;T2;

P3;T3;

P4;T4; P5;T5;

P6;T6;

P7;T7; P8;T8

Fine aggregates ืื’ืจื’ืื˜ื™ื ื“ืงื™ื Amount of material finer than the

no. 200 (75-um) sieve

ื“ืงื™ื ืขื•ื‘ืจื™ื ื ืคื” ื”ื›ืžื•ืช ืงื‘ื™ืขืช (200)ืžืกืคืจ ืžืง"ืž 75

ASTM-D-1140

---

220 A P Fine aggregates ื™ื ื“ืงื™ืืื’ืจื’ืื˜ Density, relative density (specific

gravity), and absorption

ASTM-C-128 ืฆืคื™ืคื•ืช, ืžืฉืงืœ ืกื’ื•ืœื™ ื•ืกืคื™ื’ื•ืช---

221 A P Fine aggregates for

concrete

ื“ืงื™ื ืœื‘ื˜ื•ืŸ ืื’ืจื’ืื˜ื™ื Organic impurities ืชื›ื•ืœืช ืœื›ืœื•ื›ืช ืื•ืจื’ื ื™ืช SI 3 ---

222 A P;P1;

P2;P3;

P5;T5;P6;P7;

P8

Fine and coarse

aggregates

ื™ื ื“ืงื™ื ื•ื’ืกื™ืืื’ืจื’ืื˜ Density, relative density (specific

gravity), and absorption

SI 1865 part 2 chapter 4 ืฆืคื™ืคื•ืช, ืžืฉืงืœ ืกื’ื•ืœื™ ื•ืกืคื™ื’ื•ืช

---

Based on ASTM C 127,ASTM C 128

Meet the requirement of SI 3

223 A P Fine and coarse

aggregates

ื™ื ื“ืงื™ื ื•ื’ืกื™ืืื’ืจื’ืื˜ Resistance to degradation by

abrasion and impact in the Los

Angeles machine

ืฉื™ืขื•ืจ ืฉื—ื™ืงื” ื‘ืฉื™ื˜ืช ืœื•ืก ืื ื’'ืœืก

SI 1865 part 2 chapter 8 ---

Based on ASTM C 535, C 131 Meet the

requirement of SI 3

224 A P;T;

P1;T1;

P2;T2; P3;T3;

P4;T4;

P5;T5; P6;T6;

P7;T7;

P8;T8

Fine and coarse

aggregates

ื™ื ื“ืงื™ื ื•ื’ืกื™ืืื’ืจื’ืื˜ Sieve analysis ื ื™ืคื•ื™ ASTM-C-136

---

Page 36: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 36 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and paving - Soil, Aggregates and Water :ืงืจืงืข ืื’ืจื’ื˜ื™ื ื•ืžื™ื -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

225 A P;T;

P1;T1; P2;T2;

P3;T3;

P4;T4; P5;T5;

P6;T6;

P7;T7; P8;T8

Fine and coarse

aggregates

ื™ื ื“ืงื™ื ื•ื’ืกื™ืืื’ืจื’ืื˜ Sieve analysis ื ื™ืคื•ื™ SI 1865 part 2 chapter 5

---

Similar to ASTM C 136 Meet the

requirement of SI 3

226 A P Large-size coarse

aggregates

ืžื™ืžื“ ื™ื’ื“ื•ืœ ื™ืื’ืกื™ื ื˜ืืื’ืจื’ Resistance to degradation by

abrasion and impact in the Los

Angeles machine

ืฉื™ืขื•ืจ ืฉื—ื™ืงื” ื‘ืฉื™ื˜ืช ืœื•ืก ืื ื’'ืœืก

ASTM-C-535

---

227 A P Small-size coarse

aggregates

ืžื™ืžื“ ืงื˜ื ื™ ื™ืื’ืกื™ื ื˜ืืื’ืจื’ Resistance to degradation by

abrasion and impact in the Los Angeles machine

ืฉื™ืขื•ืจ ืฉื—ื™ืงื” ื‘ืฉื™ื˜ืช ืœื•ืก ืื ื’'ืœืก

ASTM-C-131 ---

228 A P;T Soil ืงืจืงืขื•ืช Classification for civil engineering

purposes: and visual classification

ืžื™ื•ืŸ ืงืจืงืขื•ืช ืœืžื˜ืจื•ืช ื”ื ื“ืกื” ื•ืžื™ื•ืŸ ื‘ืžืขื‘ื“ื” ืžื™ื•ืŸืื–ืจื—ื™ืช:

ื—ื–ื•ืชื™

SI 253 chapter B ---

229 A P;T Soil ืงืจืงืขื•ืช Classification for civil engineering

purposes: General Matters

ืžื™ื•ืŸ ืงืจืงืขื•ืช ืœืžื˜ืจื•ืช ื”ื ื“ืกื” ืื–ืจื—ื™ืช: ืขื ื™ื™ื ื™ื ื›ืœืœื™ื

SI 253 chapter A ---

230 A P;T Soil ืงืจืงืขื•ืช Classification for civil engineering

purposes: Visual classification

ืžื™ื•ืŸ ืงืจืงืขื•ืช ืœืžื˜ืจื•ืช ื”ื ื“ืกื” ืžื™ื•ืŸ ื—ื–ื•ืชื™ืื–ืจื—ื™ืช:

SI 253 chapter C ---

231 A P;T Soil ืงืจืงืขื•ืช Classification for engineering

purposes (unified soil

classification system)

ืžื™ื•ืŸ ืงืจืงืขื•ืช ืœืžื˜ืจื•ืช ื”ื ื“ืกื” ืื–ืจื—ื™ืช

ASTM-D-2487

---

232 A T Soil ื•ืชืงืจืงืข DCP- South African pick ื“ืงืจ ื“ืจื•ื ืืคืจื™ืงืื™ In house procedure --- Based on: Prof. M. Livneh,

Transportation Research Institute

233 A P;T Soil ืงืจืงืขื•ืช Description and identification

(visual-manual procedure)

ืžื™ื•ืŸ ืงืจืงืขื•ืช ืœืžื˜ืจื•ืช ื”ื ื“ืกื” ืื–ืจื—ื™ืช ื‘ืชื”ืœื™ืš ื•ื™ื–ื•ืืœื™ ื™ื“ื ื™

ASTM-D-2488 ---

Page 37: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 37 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and paving - Soil, Aggregates and Water :ืงืจืงืข ืื’ืจื’ื˜ื™ื ื•ืžื™ื -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

234 A P5;P6

Soil ืงืจืงืขื•ืช Determination of Water

(Moisture) Content of Soil By Direct Heating

ืชื›ื•ืœืช ืžื™ื )ืจื˜ื™ื‘ื•ืช( ืฉืœ ืงืจืงืขื•ืช ื‘ื—ื™ืžื•ื ื™ืฉื™ืจ

SI 1865 part 3 chapter 8 ---

Based on ASTM D 4959

235 A P; P1;

P2;P3;

P4;P6;

P7

Soil ืงืจืงืขื•ืช Liquid limit, plastic limit, and

plasticity index

ื’ื‘ื•ืœื•ืช ื ื–ื™ืœื•ืช, ื’ื‘ื•ืœ ืคืœืกื˜ื™ื•ืช ื•ืื™ื ื“ืงืก ื”ืคืœืกื˜ื™ื•ืช

ASTM-D-4318

---

Meet the requirement of SI 3

236 A P;T;

P1;T1;

P2;T2;

P3;T3; P4;T4;

P5;T5;

P6;T6; P7;T7;

P8;T8

Soil and aggregates ื•ืื’ืจื’ืื˜ื™ื ื•ืชืงืจืงืข Compaction characteristics using

Modified Effort

ื‘ื“ื™ืงืช ื™ื—ืกื™ ืฆืคื™ืคื•ืช ืจื˜ื™ื‘ื•ืช ื‘ืฉื™ื˜ืช ืžื•ื“ื™ืคื™ื™ื“

SI 1865 part 3 chapter 2

---

Based on ASTM D 1557, ASTM D 698

237 A P:T Soil and Aggregates ืงืจืงืขื•ืช ื•ืื’ืจื’ื˜ื™ื Determination of maximum

density of soil

ืงื‘ื™ืขืช ืฆืคื™ืคื•ืช ืžืงืกื™ืžืืœื™ืช ืฉืœ ืงืจืงืขื•ืช

ASTM D 4253 ---

238 A P:T Soil and Aggregates ื•ืื’ืจื’ื˜ื™ื ืงืจืงืขื•ืช Determination of minimum

density of soil

ืงื‘ื™ืขืช ืฆืคื™ืคื•ืช ืžื™ื ื™ืžืืœื™ืช ืฉืœ ืงืจืงืขื•ืช

ASTM D 4254 ---

239 A P; P1; P2; P3;

P4; P6;

P7; P8;

Soil and fine aggregates

ื™ื ื“ืงื™ืื•ืื’ืจื’ืื˜ ื•ืชืงืจืงืข Sand equivalent value ื‘ื“ื™ืงืช ืฉื•ื•ื” ืขืจืš ื—ื•ืœ ASTM-D-2419

---

240 A P;P1;

P2;P3; P4; P6;

P7;P8

Soil and fine

aggregates

ื™ื ื“ืงื™ืืื’ืจื’ืื˜ืงืจืงืขื•ืช ื• Sand equivalent value ื‘ื“ื™ืงืช ืฉื•ื•ื” ืขืจืš ื—ื•ืœ SI 1865 part 3 chapter 6

---

Based on ASTM D 2419

Page 38: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 38 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and paving - Soil, Aggregates and Water :ืงืจืงืข ืื’ืจื’ื˜ื™ื ื•ืžื™ื -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

241 A P; P1;

P2;P3; P4;P5;

P6; P7;

P8;

Soil and rock ืงืจืงืข ื•ืกืœืข Laboratory determination of water

(moisture) content

ASTM-D-2216 ืชื›ื•ืœืช ืžื™ื ื‘ืžืขื‘ื“ื”

---

Included Bentonite suspension and

powder, for main site only

. ื”ื”ืขืจื” ืœืจื‘ื•ืช ืื‘ืงื” ื•ืชืจื—ื™ืฃ ื‘ื ื˜ื•ื ื™ื™ื˜ ืžืชื™ื™ื—ืกืช ืœืืชืจ ื”ืจืืฉื™ ื‘ืœื‘ื“

242 A P ;P1;

P6

Soil and soil-aggregate

mixtures

ืงืจืงืขื•ืช ื•ืชืขืจื•ื‘ื•ืช ืงืจืงืข ื•ืื’ืจื’ืื˜

CBR (California Bearing Ratio) ื‘ืžืฆื‘ ื ืช ืชืกื‘ื•ืœืช ืงืœื™ืคื•ืจื ื™ืชืž ืจื•ื•ื™ื”

SI 1865 part 3 chapter 7 ---

Based on ASTM D 1883 The

compaction based on: ASTM-D-1557 method D

243 A P;T;

P1;T1;

P2;T2; P3;T3;

P4;T4;

P6;T6; P7;T7;

P8;T8

Soil and soil-aggregate

mixtures

-ื•ืชืขืจื•ื‘ื•ืช ืงืจืงืข ื•ืชืงืจืงืข ืื’ืจื’ืื˜

Classification of Soils for highway

construction purpose

ืžื™ื•ืŸ ืงืจืงืขื•ืช ืœืžื˜ืจืช ื‘ื ื™ื™ืช ื›ื‘ื™ืฉื™ื ืจืืฉื™ื™ื

ASTM-D-3282

---

Based on: AASHTO

244 A P;T;

P1;T1; P2;T2;

P3;T3;

P4;T4;

P5;T5;

P6;T6;

P7;T7; P8;T8

Soil, aggregates and

soil-aggregate mixtures

ื™ื ืื’ืจื’ืื˜ืงืจืงืขื•ืช, ืื’ืจื’ืื˜-ื•ืชืขืจื•ื‘ื•ืช ืงืจืงืข

Density and unit weight of soil in

place by the sand-cone method

ื‘ืฉื™ื˜ืช ื—ืจื•ื˜ ืงืจืงืขืฆืคื™ืคื•ืช ื”ื—ื•ืœ

ASTM-D-1556

---

Page 39: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 39 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and paving - Soil, Aggregates and Water :ืงืจืงืข ืื’ืจื’ื˜ื™ื ื•ืžื™ื -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

245 A P;T;

P1;T1; P2;T2;

P3;T3;

P4;T4; P5;T5;

P6;T6;

P7;T7; P8;T8

Soil, aggregates and

soil-aggregate mixtures

ื™ื ืื’ืจื’ืื˜ืงืจืงืขื•ืช, ืื’ืจื’ืื˜ -ื•ืชืขืจื•ื‘ื•ืช ืงืจืงืข

Density by the sand-cone method in situ

ื‘ืฉื™ื˜ืช ื‘ืืชืจ ืงื‘ื™ืขืช ื”ืฆืคื™ืคื•ืช ื—ืจื•ื˜ ื”ื—ื•ืœ

SI 1865 part 3 chapter 4

---

Based on ASTM D 1556

246 A P;T;

P2;T2;

P6;T6;

P7;T7

Soil, aggregates and

soil-aggregate mixtures

ื™ื ืื’ืจื’ืื˜ืงืจืงืขื•ืช, ืื’ืจื’ืื˜-ื•ืชืขืจื•ื‘ื•ืช ืงืจืงืข

Density in place by the drive-

cylinder method

ืงื‘ื™ืขืช ื”ืฆืคื™ืคื•ืช ื‘ืขื–ืจืช ื’ืœื™ืœ ืžื•ื—ื“ืจ

SI 1865 part 3 chapter 3

---

Based on ASTM D 2937

247 A P;T;

P2;T2;

P7;T7

Soil, aggregates and

soil-aggregate mixtures

ื™ื ืื’ืจื’ืื˜ืงืจืงืขื•ืช, ืื’ืจื’ืื˜-ื•ืชืขืจื•ื‘ื•ืช ืงืจืงืข

Density soil in place by the drive-

cylinder method

ื‘ืขื–ืจืช ื’ืœื™ืœ ืงืจืงืขืฆืคื™ืคื•ืช ืžื•ื—ื“ืจ

ASTM-D-2937

---

248 A T;T1;

T2;T3;T4;T5;

T6;T7;

T8

Soil, aggregates and

soil-aggregate mixtures

ืงืจืงืข, ืื’ืจื’ืื˜ื™ื ื•ืชืขืจื•ื‘ื•ืช ืงืจืงืข ื•ืื’ืจื’ืื˜

In situ test of density and moisture

content of soil by nuclear gauge

ื‘ื“ื™ืงื” ื‘ืืชืจ ืฉืœ ืฆืคื™ืคื•ืช ื”ืงืจืงืข ื•ืจื˜ื™ื‘ื•ืชื” ื‘ืžื“ ื’ืจืขื™ื ื™

SI 1454

---

249 A T;T1;

T2;T3;T4;T5;

T6;T7;

T8

Soil, aggregates and

soil-aggregate mixtures

ื™ื ืื’ืจื’ืื˜ืงืจืงืขื•ืช, ืื’ืจื’ืื˜-ื•ืชืขืจื•ื‘ื•ืช ืงืจืงืข

In situ test of density by nuclear

gauge

ื‘ื“ื™ืงื” ื‘ืืชืจ ืฉืœ ืฆืคื™ืคื•ืช ื”ืงืจืงืข ื‘ืžื“ ื’ืจืขื™ื ื™

SI 1865 part 3 chapter 5

---

Based on SI 1454

250 A P;T Soil, rock and soil-

aggregate mixtures

ื™ื ื“ืงื™ื ื•ื’ืกื™ืืื’ืจื’ืื˜ Contents of crushed aggregates

from produced aggregate from

bonches of river

ืชื›ื•ืœืช ืื’ืจื’ื˜ื™ื ื’ืจื•ืกื™ื ืžืื’ืจื’ื˜ ื”ืžื™ื•ืฆืจ ืžืฆืจื•ืจื•ืช ื ื—ืœ

SI 3 part 4 ---

Page 40: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 40 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and paving - Soil, Aggregates and Water :ืงืจืงืข ืื’ืจื’ื˜ื™ื ื•ืžื™ื -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

251 A P;T;

P1;T1; P2;T2;

P3;T3;

P4;T4; P5;T5;

P6;T6;

P7;T7; P8;T8

Soils ืงืจืงืขื•ืช Compaction characteristics using

modified effort

ื‘ื“ื™ืงืช ื™ื—ืกื™ ืฆืคื™ืคื•ืช ืจื˜ื™ื‘ื•ืช ื‘ืฉื™ื˜ืช ืžื•ื“ื™ืคื™ื™ื“

ASTM-D-1557

---

252 A P;T Soils ืงืจืงืขื•ืช Particle-size analysis ืื ืœื™ื–ื” ืžื›ื ื™ืช ASTM-D-422 ---

Meet the requirement of SI 3

253 A T Soils ืงืจืงืขื•ืช Penetration test and split-barrel

sampling

ื•ื“ื’ื™ืžืช ื‘ื“ื™ืงืช ื”ื—ื“ืจื” ืชืงื ื™ืช (SPT) ืงืจืงืข ื‘ื’ืœื™ืœ ืžืคื•ืฆืœ

ASTM-D-1586 ---

254 A P;T Soils ืงืจืงืขื•ืช Specific gravity by water

pycnometer

ASTM-D-854 ืกื’ื•ืœื™ืžืฉืงืœ ---

255 A P;P1;

P6

Soils and soil-

aggregate mixtures

ืงืจืงืขื•ืช ื•ืชืขืจื•ื‘ื•ืช ืงืจืงืข ื•ืื’ืจื’ืื˜

CBR (California Bearing Ratio) ืงืœื™ืคื•ืจื ื™ืชื ืช ืชืกื‘ื•ืœืช ืž ASTM-D-1883 ---

The compaction based on: ASTM-D-

1557 method D

256 A P;T Water-based fluids

(Bentonite suspension)

ื ื•ื–ืœื™ื ืžื‘ื•ืกืกื™ื ืขืœ ืžื™ื )ืชืจื—ื™ืฃ ื‘ื ื˜ื•ื ื™ื™ื˜(

Decantation ื™ืฆื™ื‘ื•ืช ื‘ืžืฉื•ืจื” -ื“ืงื ื˜ืฆื™ื” In house procedure ---

257 A P;T;

P1;T1;

P2;T2;

P3;T3; P4;T4;

P6;T6;

P7;T7

Water-based fluids

(Bentonite suspension)

ื ื•ื–ืœื™ื ืžื‘ื•ืกืกื™ื ืขืœ ืžื™ื )ืชืจื—ื™ืฃ ื‘ื ื˜ื•ื ื™ื™ื˜(

Density ืฆืคื™ืคื•ืช ISO 10414 part 1

section 4.2

---

Based on: API series 13 โ€“ Drilling fluid

materials

258 A P;T; Water-based fluids

(Bentonite suspension)

ื ื•ื–ืœื™ื ืžื‘ื•ืกืกื™ื ืขืœ ืžื™ื )ืชืจื—ื™ืฃ ื‘ื ื˜ื•ื ื™ื™ื˜(

Determination of viscosity

ISO 10414 part 1 ื‘ื“ื™ืงืช ืฆืžื™ื’ื•ืช

section 6.3 --- Based on: API series 13 โ€“ Drilling fluid

materials

Page 41: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Date of issue 24.07.2017 Version No. 7 Page No. 41 of: 54

Item Scope

Type

Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

Interpretation

Remarks

Group of products: Soil and paving - Soil, Aggregates and Water :ืงืจืงืข ืื’ืจื’ื˜ื™ื ื•ืžื™ื -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

259 A P Water-based fluids

(Bentonite suspension)

ื ื•ื–ืœื™ื ืžื‘ื•ืกืกื™ื ืขืœ ืžื™ื(ืชืจื—ื™ืฃ ื‘ื ื˜ื•ื ื™ื™ื˜)

Electrical conductivity testing by

conductivity gauge

ื‘ื“ื™ืงืช ืžื•ืœื™ื›ื•ืช ื—ืฉืžืœื™ืช ื‘ืขื–ืจืช ืžื“ ืžื•ืœื™ื›ื•ืช

In house procedure ---

Based on: API series 13 โ€“ Drilling fluid

materials

260 A P Water-based fluids

(Bentonite suspension)

ื ื•ื–ืœื™ื ืžื‘ื•ืกืกื™ื ืขืœ ืžื™ื )ืชืจื—ื™ืฃ ื‘ื ื˜ื•ื ื™ื™ื˜(

Fine Particle Content ืชื›ื•ืœืช ื—ืœืงื™ืงื™ื ื“ืงื™ื In house procedure ---

261 A P7;T7; Water-based fluids

(Bentonite suspension)

ื ื•ื–ืœื™ื ืžื‘ื•ืกืกื™ื ืขืœ ืžื™ื )ืชืจื—ื™ืฃ ื‘ื ื˜ื•ื ื™ื™ื˜(

Lose of liquid and cake thickness ื”ืคืกื“ ื ื•ื–ืœ ื•ืขื•ื‘ื™ ืขื•ื’ื” ISO 10414 part 1

section 7.2 ---

Based on: API series 13 โ€“ Drilling fluid

materials

262 A P1;T1;

P2;T2;

P3;T3;

P4;T4; P6;T6;

P7;T7

Water-based fluids

(Bentonite suspension)

ื ื•ื–ืœื™ื ืžื‘ื•ืกืกื™ื ืขืœ ืžื™ื ื‘ื ื˜ื•ื ื™ื™ื˜(ืชืจื—ื™ืฃ )

PH pH ISO 10414 part 1

section 11

---

Based on: API series 13 โ€“ Drilling fluid

materials

API= American Petroleum Institute

263 A P;T; Water-based fluids

(Bentonite suspension)

ื ื•ื–ืœื™ื ืžื‘ื•ืกืกื™ื ืขืœ ืžื™ื )ืชืจื—ื™ืฃ ื‘ื ื˜ื•ื ื™ื™ื˜(

Preparation of suspension ื”ื›ื ืช ืชืจื—ื™ืฃ ISO 10414 part 1

section 9.3 ---

Based on: API series 13 โ€“ Drilling fluid

materials

264 A T1;T2;

T3;T4;

T6;T7

Water-based fluids

(Bentonite suspension)

ื ื•ื–ืœื™ื ืžื‘ื•ืกืกื™ื ืขืœ ืžื™ื )ืชืจื—ื™ืฃ ื‘ื ื˜ื•ื ื™ื™ื˜(

Sampling ื ื˜ื™ืœืช ื”ืžื“ื’ื ื”ืžื™ื™ืฆื’ ISO 10414 part 1 annex

F ---

Based on: API series 13 โ€“ Drilling fluid

materials

265 A P1;T1;

P2;T2;

P3;T3;

P4;T4;

P6;T6; P7;T7

Water-based fluids

(Bentonite suspension)

ื ื•ื–ืœื™ื ืžื‘ื•ืกืกื™ื ืขืœ ืžื™ื ื‘ื ื˜ื•ื ื™ื™ื˜(ืชืจื—ื™ืฃ )

Viscosity: Marsh funnel ื‘ื“ื™ืงืช ืฆืžื™ื’ื•ืช ืขืœ ื™ื“ื™ ืžืฉืคืš ืžืืจืฉ

ISO 10414 part 1

section 6.2

---

Based on: API series 13 โ€“ Drilling fluid

materials

Page 42: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17020; 2012 Inspection Activity - Type A Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

Date of issue 24.07.2017 Version No. 7 Page No. 42 of: 54

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Item Site Field Requirements Standard / Method Remarks

Group of products: Construction - Building systems :ืžืขืจื›ื•ืช ื”ื‘ื ื™ืŸ -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Design and Installation, Antenna ืื ื˜ื ื”ืชื›ืŸ ื•ื”ืชืงื ื” ,

266 T Common receiving antenna

systems (MATV)

ืžืฉื•ืชืคืช ืžืชืงื ื™ ืื ื˜ื ื•ืช ืœืงืœื™ื˜ื” )ืืง"ืž(

All activities specified in the

standard

SI 799 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช

Item Site Field Requirements Standard / Method Remarks

Group of products: Construction - Building Systems :ืžืขืจื›ื•ืช ื”ื‘ื ื™ืŸ -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Design and Installation, Gas installations for residential buildings ืžืชืงื ื™ ื’ื– ืœืžื‘ื ื™ ืžื’ื•ืจื™ืืชื›ืŸ ื•ื”ืชืงื ื” ,

267 T Installations of liquefied

petroleum gases (LPG) testing

ืžืขื•ื‘ื™ื ืคื—ืžื™ืžื ื™ื™ื ืœื’ื–ื™ื ืžืชืงื ื™ื ื‘ื“ื™ืงื•ืช(: ืž"ื’ืค)

All activities specified in the

standard

SI 158 part 4 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช

268 T Installations for liquefied

hydrocarbon gases petroleum

gases (LPG) storage

ืžืขื•ื‘ื™ื ืคื—ืžื™ืžื ื™ื™ื ืœื’ื–ื™ื ืžืชืงื ื™ื ืžืื’ืจื™ื(: ืž"ื’ืค)

All activities specified in the

standard

SI 158 part 1 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช

269 T Installations for liquefied

petroleum gases (LPG) installation of lpg consuming

appliances

ืžืขื•ื‘ื™ื ืคื—ืžื™ืžื ื™ื™ื ืœื’ื–ื™ื ืžืชืงื ื™ื ืฆื•ืจื›ื™ ืžื›ืฉื™ืจื™ื ื”ืชืงื ืช(:ืž"ื’ืค)

ืž"ื’ืค

All activities specified in the

standard

SI 158 part 3 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช

270 T Installations for liquefied

petroleum gases (LPG)

:ืžืขื•ื‘ื™ื ืคื—ืžื™ืžื ื™ื™ื ืœื’ื–ื™ื ืžืชืงื ื™ื ื”ืชืงื ื•ืช

All activities specified in the

standard

SI 158 part 2 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช

Page 43: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17020; 2012 Inspection Activity - Type A Department:

Schedule of Accreditation

Date of issue 24.07.2017 Version No. 7 Page No. 43 of: 54 The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Item Site Field Requirements Standard / Method Remarks

Group of products: Construction - Building Systems :ืžืขืจื›ื•ืช ื”ื‘ื ื™ืŸ -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Design and Installation, Sanitary systems ืžืขืจื›ื•ืช ืกื ื™ื˜ืจื™ื•ืช ืชื›ืŸ ื•ื”ืชืงื ื” ,

271 T

Sanitary systems plumbing

systems: The building sewerage and the building water drainage

ืžืขืจื›ื•ืช -ืžืชืงื ื™ ืชื‘ืจื•ืื” ื‘ื™ื•ื‘ ื”ื‘ื ื™ื™ืŸ ื•ืชื™ืขื•ืœ : ืฉืจื‘ืจื‘ื•ืช

ื”ื‘ื ื™ื™ืŸ

All activities specified in the

standard

SI 1205 part 4 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช

272 T

Sanitary systems plumbing

systems: Plumbing fixtures and

their accessories

ืžืขืจื›ื•ืช -ืžืชืงื ื™ ืชื‘ืจื•ืื” ืžืขืจื›ื•ืช ืฉืจื‘ืจื‘ื•ืช : ืฉืจื‘ืจื‘ื•ืช ืฉืจื‘ืจื‘ื•ืช ื•ืื‘ื–ืจื™ื”ืŸืงื‘ื•ืขื•ืช

All activities specified in the

standard

SI 1205 part 3 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช

273 T

Sanitary systems plumbing

systems: Drainage system

ืžืขืจื›ื•ืช -ืชืงื ื™ ืชื‘ืจื•ืื” ืž ืžืขืจื›ืช ื”ื ืงื–ื™ืืฉืจื‘ืจื‘ื•ืช:

All activities specified in the

standard

SI 1205 part 2 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช

274 T

Sanitary systems plumbing

systems: Cold and hot water

supply system

ืžืขืจื›ื•ืช -ืชืงื ื™ ืชื‘ืจื•ืื” ืžืฉืจื‘ืจื‘ื•ืช: ืžืขืจื›ืช ื”ืกืคืงืช ืžื™ื

ืงืจื™ื ื•ื—ืžื™ื

All activities specified in the

standard

SI 1205 part 1 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช

275 T

Sanitary systems plumbing

systems: Air-raid shelters

ืžืขืจื›ื•ืช -ืชืงื ื™ ืชื‘ืจื•ืื” ืž ืžืงืœื˜ื™ืืฉืจื‘ืจื‘ื•ืช:

All activities specified in the

standard

SI 1205 part 5 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช

276 T

Sanitary systems plumbing

systems

SI 1205 part 0 ื›ืœืœื™ General ืžืขืจื›ื•ืช ืฉืจื‘ืจื‘ื•ืช -ืžืชืงื ื™ ืชื‘ืจื•ืื”

277 T

Sanitary systems plumbing

systems

SI 1205 part 6 ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื” Inspection methods ืžืขืจื›ื•ืช ืฉืจื‘ืจื‘ื•ืช -ืžืชืงื ื™ ืชื‘ืจื•ืื”

Page 44: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17020; 2012 Inspection Activity - Type A Department:

Schedule of Accreditation

Date of issue 24.07.2017 Version No. 7 Page No. 44 of: 54 The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Item Site Field Requirements Standard / Method Remarks

Group of products: Construction - Building Systems :ื”ื‘ื ื™ืŸืžืขืจื›ื•ืช -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Design and Installation, Solar systems ืžืขืจื›ื•ืช ืกื•ืœืจื™ื•ืช, ืชื›ืŸ ื•ื”ืชืงื ื”

278 T Solar water heating systems:

Pumped domestic systems

ืžืขืจื›ื•ืช ืกื•ืœืืจื™ื•ืช ืœื—ื™ืžื•ื ืžื™ื: ืžืขืจื›ื•ืช ืžืื•ืœืฆื•ืช ื“ื™ืจืชื™ื•ืช

All activities specified in the

standard

SI 579 part 6 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช

279 T Solar water heating systems:

Central systems in buildings

ืžืขืจื›ื•ืช ืกื•ืœืืจื™ื•ืช ืœื—ื™ืžื•ื ืžื™ื: ืžืขืจื›ื•ืช ืžืจื›ื–ื™ื•ืช ื‘ื‘ื ื™ื™ื ื™ื

All activities specified in the

standard

SI 579 part 5 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช

280 T Solar water heating systems:

Thermosiphonic systems

:ืžืขืจื›ื•ืช ืกื•ืœืืจื™ื•ืช ืœื—ื™ืžื•ื ืžื™ื ืชืจืžื•ืกื™ืคื•ื ื™ื•ืช ืžืขืจื›ื•ืช

Design, installation and testing ืชื›ืŸ, ื”ืชืงื ื” ื•ื‘ื“ื™ืงื” SI 579 part 4

Page 45: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17020; 2012 Inspection Activity - Type A Department:

Schedule of Accreditation

Date of issue 24.07.2017 Version No. 7 Page No. 45 of: 54 The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Item Site Field Requirements Standard / Method Remarks

Group of products: Engineering Items - Buildings, Constructions, Infrastructure and

Concrete

ืžื‘ื ื™ื, ืชืฉืชื™ื•ืช ื•ื‘ื˜ื•ืŸ -ืคืจื™ื˜ื™ื ื”ื ื“ืกื™ื™ื ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

Physical and Engineering Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช ื•ื”ื ื“ืกื™ื•ืช

281 T Guards and handrails ืžืขืงื™ื ื•ืžืกืขื“ื™ื All activities specified in the

standard

SI 1142 ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช

282 T Playground equipment ืžืชืงื ื™ ืžืฉื—ืงื™ื Playground ืืชืจ ื”ืžืฉื—ืงื™ื SI 1498 part 8 โ€“ 2006

283 T Playground equipment ืžืชืงื ื™ ืžืฉื—ืงื™ื Inspection and maintenance ื‘ื“ื™ืงื•ืช ื•ืชื—ื–ื•ืงื” SI 1498 part 4 โ€“ 2001

284 T Playground equipment ืžืชืงื ื™ ืžืฉื—ืงื™ื Special requirements for different

kinds of equipment

ื‘ื“ื™ืงื•ืช ืžื™ื•ื—ื“ื•ืช ืœืžืชืงื ื™ื ืžืžื™ื ื™ื ืฉื•ื ื™ื

SI 1498 part 5 - 2000

285 T Playground equipment ืžืชืงื ื™ ืžืฉื—ืงื™ื General safety requirements and

inspection methods

SI 1498 part 1 โ€“ 2006 ื“ืจื™ืฉื•ืช ื‘ื˜ื™ื—ื•ืช ื›ืœืœื™ื•ืช ื•ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื”

286 T Playground equipment ืžืชืงื ื™ ืžืฉื—ืงื™ื Additional specific safety

requirements and inspection methods

for slides

ื“ืจื™ืฉื•ืช ื‘ื˜ื™ื—ื•ืช ื ื•ืกืคื•ืช ื•ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื” ื ื•ืกืคื•ืช ืœืžื’ืœืฉื•ืช

SI 1498 part 3 โ€“ 2006

287 T Playground equipment ืžืชืงื ื™ ืžืฉื—ืงื™ื Additional specific safety

requirements and inspection methods for runways

ื“ืจื™ืฉื•ืช ื‘ื˜ื™ื—ื•ืช ื ื•ืกืคื•ืช ื•ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื” ื ื•ืกืคื•ืช ืœืžืกื™ืœื•ืช ื’ืœื™ืฉื”

SI 1498 part 4 โ€“ 2006

288 T Playground equipment ืžืชืงื ื™ ืžืฉื—ืงื™ื Additional specific safety

requirements and t inspection

methods for rocking equipment

ื“ืจื™ืฉื•ืช ื‘ื˜ื™ื—ื•ืช ื ื•ืกืคื•ืช ื•ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื” ื ื•ืกืคื•ืช ืœื ื“ื ื“ื•ืช ืžืื–ื ื™ื™ื ื•ืœืžืชืงื ื™ ื ืขื ื•ืข

SI 1498 part 6 โ€“ 2006

289 T Playground equipment ืžืชืงื ื™ ืžืฉื—ืงื™ื Additional specific safety

requirements and inspection methods for swing

ื ื•ืกืคื•ืช ื•ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื” ื“ืจื™ืฉื•ืช ื‘ื˜ื™ื—ื•ืช ื ื•ืกืคื•ืช ืœื ื“ื ื“ื•ืช ืชืœื•ื™ื•ืช

SI 1498 part 2 โ€“ 2006

290 T Playground equipment ืžืชืงื ื™ ืžืฉื—ืงื™ื Additional specific safety

requirements and inspection methods

for carousels

ื“ืจื™ืฉื•ืช ื‘ื˜ื™ื—ื•ืช ื ื•ืกืคื•ืช ื•ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื” ื ื•ืกืคื•ืช ืœืกื—ืจื—ืจื•ืช

SI 1498 part 5 โ€“ 2006

Page 46: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17020; 2012 Inspection Activity - Type A Department:

Schedule of Accreditation

Date of issue 24.07.2017 Version No. 7 Page No. 46 of: 54 The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Item Site Field Requirements Standard / Method Remarks

Group of products: Engineering Items - Buildings, Constructions, Infrastructure and

Concrete

ืžื‘ื ื™ื, ืชืฉืชื™ื•ืช ื•ื‘ื˜ื•ืŸ -ืคืจื™ื˜ื™ื ื”ื ื“ืกื™ื™ื ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

Physical and Engineering Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช ื•ื”ื ื“ืกื™ื•ืช

291 T Playground equipment ืžืชืงื ื™ ืžืฉื—ืงื™ื Installation of equipment ื”ืชืงื ืช ื”ืžืชืงื ื™ื SI 1498 part 3 โ€“ 2000

292 T Playground equipment ืžืชืงื ื™ ืžืฉื—ืงื™ื General ื›ืœืœื™ SI 1498 part 1 - 2000

293 T Playground equipment ืžืชืงื ื™ ืžืฉื—ืงื™ื Cuidance on installation, inspection,

maintenance and operation

ืžื“ืจื™ืš ืœื”ืชืงื ื”, ืœืคื™ืงื•ื—, ืœืชื—ื–ื•ืงื” ื•ืœืชืคืขื•ืœ

SI 1498 part 7 โ€“ 2006

294 T Playground equipment ืžืชืงื ื™ ืžืฉื—ืงื™ื Design of equipment ื”ืžื™ืชืงื ื™ื ืชื›ืŸ SI 1498 part 2 โ€“ 2001

295 T Physical training modules in

unsupervised sites

ืžืชืงื ื™ื ืœืคืขื™ืœื•ืช ื’ื•ืคื ื™ืช ื‘ืืชืจื™ื ื ื˜ื•ืœื™ ื”ืฉื’ื—ื”

General safety requirement and test

methods

SI 1497 part 1-2013 ื“ืจื™ืฉื•ืช ื‘ื˜ื™ื—ื•ืช ื›ืœืœื™ื•ืช ื•ืฉื™ื˜ื•ืช ื‘ื“ื™ืงื”

296 T Physical training modules in

unsupervised sites

ืžืชืงื ื™ื ืœืคืขื™ืœื•ืช ื’ื•ืคื ื™ืช ื‘ืืชืจื™ื ื ื˜ื•ืœื™ ื”ืฉื’ื—ื”

Guidance on inspection, maintenance

and site operation

ื”ื•ืจืื•ืช ืœื‘ื—ื™ื ื” ,ืœืชื—ื–ื•ืงื” ื•ืœืชืคืขื•ืœ ื”ืืชืจ

SI 1497 part 2-2013

Page 47: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17020; 2012 Inspection Activity - Type A Department:

Schedule of Accreditation

Date of issue 24.07.2017 Version No. 7 Page No. 47 of: 54 The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Item Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Remarks

Group of Products: Fire & Rescue โ€“ Fire Detection Systems , Alternative Extinguishing Systems :ืžืขืจื›ื•ืช ื’ื™ืœื•ื™ ืืฉ ื•ื›ื™ื‘ื•ื™ ืืœื˜ืจื ื˜ื™ื‘ื™ -ื›ื‘ืื•ืช ื•ื”ืฆืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

System Planning & Proper Installation ื‘ื“ื™ืงืช ืชื›ื ื•ืŸ ื•ืชืงื™ื ื•ืช ื”ืชืงื ื”

297 T Aerosol fire extinguishing systems ื‘ืืจื•ืกื•ืœื›ื™ื‘ื•ื™ ืืฉ ืœืžืขืจื›ื•ืช Installation ื”ืชืงื ื” SI 5210

298 T Carbon dioxide extinguishing systems ื‘ืคื—ืžืŸ ื“ื• ื—ืžืฆื ื™ ื›ื™ื‘ื•ื™ ืืฉ ืžืขืจื›ื•ืช Installation

NFPA 12 NFPA= National Fire Protection ื”ืชืงื ื”

Association

299 T Clean agent automatic fire extinguishing

systems

SI 1597 ืชื›ื ื•ืŸ ื•ื”ืชืงื ื” Installation ืื•ื˜ื•ืžื˜ื™ื•ืช ื‘ื’ื– ื›ื™ื‘ื•ื™ ื›ื™ื‘ื•ื™ ืืฉ ืžืขืจื›ื•ืช

300 T Clean agent fire extinguishing systems ื‘ื—ื•ืžืจื™ื ื ืงื™ื™ื )ื’ื–( ื›ื™ื‘ื•ื™ ืืฉ ืžืขืจื›ื•ืช Installation ื”ืชืงื ื” NFPA 2001

301 T Fire detection systems ืžืขืจื›ื•ืช ื’ื™ืœื•ื™ ืืฉ Installation instructions and general

requirements

SI 1220 part 3 ื”ื•ืจืื•ืช ื”ืชืงื ื” ื•ื“ืจื™ืฉื•ืช ื›ืœืœื™ื•ืช

Page 48: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17020; 2012 Inspection Activity - Type A Department:

Schedule of Accreditation

Date of issue 24.07.2017 Version No. 7 Page No. 48 of: 54 The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Item Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Remarks

Group of Products: Fire & Rescue โ€“ Fire Extinguishing Systems, Water Based :ื™ื ืžืขืจื›ื•ืช ื›ื™ื‘ื•ื™ ืืฉ ืขืœ ื‘ืกื™ืก ืž -ื›ื‘ืื•ืช ื•ื”ืฆืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

System Planning & Proper Installation ื‘ื“ื™ืงืช ืชื›ื ื•ืŸ ื•ืชืงื™ื ื•ืช ื”ืชืงื ื”

302 P;T Sprinkler systems, water-based ืขืœ ื‘ืกื™ืก ืžื™ื ืžืขืจื›ื•ืช ืžืชื–ื™ื Installation ืชื›ื ื•ืŸ ื•ื”ืชืงื ื” SI 1596

Page 49: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17020; 2012 Inspection Activity - Type A Department:

Schedule of Accreditation

Date of issue 24.07.2017 Version No. 7 Page No. 49 of: 54 The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Item Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Remarks

Group of Products: Fire & Rescue โ€“ Fire Rescue Systems :ืžืขืจื›ื•ืช ื”ืฆืœื” -ื›ื‘ืื•ืช ื•ื”ืฆืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

System Planning & Proper Installation ื‘ื“ื™ืงืช ืชื›ื ื•ืŸ ื•ืชืงื™ื ื•ืช ื”ืชืงื ื”

303 T Fire Safety Building : Smok Control

Systems Building Except Residential

Building up to 12 Meter Height

: ืžืขืจื›ืช ื‘ืงืจืช ืขืฉืŸ ื‘ื‘ื ื™ื™ื ื™ื ืื‘ื˜ื™ื—ื•ืช ืืฉ ื‘ื‘ื ื™ื™ื ื™ืž'. 12ืœืžืขื˜ ื‘ื ื™ื™ื ื™ ืžื’ื•ืจื™ื ืฉื’ื•ื‘ื”ื ืขื“ โ€“

Installation ื”ืชืงื ื” SI 1001 part 2.2

304 T Swinging fire doors ื“ืœืชื•ืช ืืฉ ืกื•ื‘ื‘ื•ืช Installation (After Installation) )ื”ืชืงื ื” )ื‘ืชื•ื ื”ื”ืชืงื ื” SI 1212 part 4 section

4.4, 4.5

Page 50: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Calibration Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

Date of issue 24.07.2017 Version No. 7 Page No. 50 of: 54

The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Item Scope

Type

Site Measurand, Instrument, Gauge Range

[Including margins]

(Does not include margins)

CMC Expressed as

an Expanded

Uncertainty (95%)

Reference Document Remarks

Group of products: Calibration :ื›ื™ื•ืœ ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Mechanical Quantities - Length ืื•ืจืš-ื’ื“ืœื™ื ืžื›ื ื™ื™ื

305 A P Length, Steel Rules,

Engineer

ืื•ืจืš, ืกืจื’ืœื™ ืคืœื“ื”

[10 mm to 1 m] 0.26 mm JIS B 7516-2005 Gauge for calibration rules

306 A P Length, Instruments, Dial indicator

ืื•ืจืš, ืžื›ืฉื™ืจื™ื,

ื—ื•ื’ืŸ

[10 ยตm to 25 mm] 4 ยตm

ISO: 463-2006 Dial Gauge calibrators

Gauge Blocks with 0.01 mm

resolution

307 A P Length, Instruments,

Caliper Vernier

ืื•ืจืš, ืžื›ืฉื™ืจื™ื, ื–ื—ื•ืŸ ื•ื•ืจื ื™ืจ

[1 mm to 500 mm] 0.02 mm JIS B 7507-1993

Gauge Blocks

308 A P Length,

Sieves

ืื•ืจืš, ื ืคื•ืช

[0.063 mm to 4.75 mm]

[0.056 mm to 12.05 mm]

[19.0 mm to 125 mm]

5 ยตm

0.06 mm

0.08 mm

ASTM E 11-04 Optical comparator

Digital Caliper

Page 51: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Calibration Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

Date of issue 24.07.2017 Version No. 7 Page No. 51 of: 54 The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Item Scope

Type

Site Measurand, Instrument, Gauge Range

[Including margins]

(Does not include margins)

CMC Expressed as

an Expanded

Uncertainty (95%)

Reference Document Remarks

Group of products: Calibration :ื›ื™ื•ืœ ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Electrical Quantities - RF Frequency, Time ืชื“ืจ ื’ื‘ื•ื”, ื–ืžืŸ -ื’ื“ืœื™ื ื—ืฉืžืœื™ื™ื

309 A P;T Time, Stop Watches

ื–ืžืŸ, ืฉืขื•ื ื™ ืขืฆืจ

[10 s to 1800 s]

0.3 s.

In house procedure Reference Stop Watches 0.01 s

310 A P;T Time,

Stop Watches, Timers

ื–ืžืŸ, ืฉืขื•ื ื™ ืขืฆืจ, ืžื•ื ื” ื–ืžืŸ

[1800 s to 3600 s] 1.6 s. In house procedure Reference Stop Watches 1 s

311 A P;T Timers ืžื•ื ื” ื–ืžืŸ

[10 s to 1800 s] 0.7 s. In house procedure Reference Stop Watches 1 s

Page 52: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Calibration Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

Date of issue 24.07.2017 Version No. 7 Page No. 52 of: 54 The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Item Scope

Type

Site Measurand, Instrument, Gauge Range

[Including margins]

(Does not include margins)

CMC Expressed as

an Expanded

Uncertainty (95%)

Reference Document Remarks

Group of products: Calibration :ื›ื™ื•ืœ ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Physical Quantities - Force, Torque ืžื•ืžื ื˜ ,ื—ื› - ืื’ื“ืœื™ื ืคื™ื–ื™ืงืœื™ื™

312 A P;T

Force, Force measurement machines,

compressions only

ื›ื—, ืžื›ื•ื ื•ืช ืžื“ื™ื“ืช ื›ื—, ืœื—ื™ืฆื” ื‘ืœื‘ื“

[500 N to 1800 kN] 0.5%OR ISO 7500 โ€“ 1: 2004 Reference dynamometer

313 A P;T Force,

Proving Rings

ื›ื—, ื˜ื‘ืขืช ื›ื—

[500 N to 75 kN] 0.46% OR ISO 376-1997 Reference dynamometer

Page 53: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Calibration Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

Date of issue 24.07.2017 Version No. 7 Page No. 53 of: 54 The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Item Scope

Type

Site Measurand, Instrument, Gauge Range

[Including margins]

(Does not include margins)

CMC Expressed as

an Expanded

Uncertainty (95%)

Reference Document Remarks

Group of products: Calibration :ื›ื™ื•ืœ ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Physical Quantities - Mass ืžืกื” - ืื’ื“ืœื™ื ืคื™ื–ื™ืงืœื™ื™

314 A

P,T

Mass,

Weighing Machines (non-automatic),

ืžืกื” ืžืื–ื ื™ื™ื

[1 mg to 200 g]

(200 g to 1000 g]

0.3 mg

0.01 g

OIML R-76 part 1-2006

OIML R-76 part 2-2007

Actual Scale interval (d)

0.1 mg

315 A P,T (1kg to 16 kg] 0.1 g 0.1 g

316 A P,T (16kg to 50 kg]

(30 kg to 50 kg]

1 g

5 g

1 g

317 A P,T Mass, Weighing Machines (non-automatic),

ืžืกื” ืžืื–ื ื™ื™ื

(50 kg to 250 kg] 100 g OIML R-76 part 2-2006

OIML R-76 part 2-2007

100 g

Page 54: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No ... · PDF fileDepartment: Testing Laboratory ISO/IEC 17025; 2005 Accreditation No. 002 Schedule of Accreditation Site: P or

002 Accreditation No. ISO/IEC 17025; 2005 Calibration Laboratory Department:

Schedule of Accreditation

Site: P or T or M, P-Permanent, T-Temporary, M-Mobile Type of Scopes: A- Fixed, C- Flexible scope in analytical tests : Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

Date of issue 24.07.2017 Version No. 7 Page No. 54 of: 54 The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

Item Scope

Type

Site Measurand, Instrument, Gauge Range

[Including margins]

(Does not include margins)

CMC Expressed as

an Expanded

Uncertainty (95%)

Reference Document Remarks

Group of products: Calibration :ื›ื™ื•ืœ ืžืฉืคื—ืช ืžื•ืฆืจื™ื

Physical Quantities - Temperature ื˜ืžืคืจื˜ื•ืจื” - ืื’ื“ืœื™ื ืคื™ื–ื™ืงืœื™ื™

318 A P Temperature,

Liquid in Glass Thermometers

ื˜ืžืคืจื˜ื•ืจื”, ืžื“ื™ ื—ื•ื ื ื•ื–ืœ ื‘ื–ื›ื•ื›ื™ืช

[5 0C to 98.5 0C] 0.5 0C ISO 386-1977

Water bath

Reference thermometer

319 A P Temperature,

Electronic Thermometers

with sensors

ื˜ืžืคืจื˜ื•ืจื”,ืืœืงื˜ืจื•ื ื™ื™ื ืขื ื’ืฉืฉื™ืืžื“ื™ ื—ื•ื

[5 0C to 98.5 0C]

0.2 0C

ISO 386:1977 Reference thermometer

Water bath

320 A P,T Temperature Uniformity Test

Furnaces

ื‘ื“ื™ืงืช ืื—ื™ื“ื•ืช ื˜ืžืคืจื˜ื•ืจื”,ืชื ื•ืจื™ื

[35 0C to 180 0C] 0.70C ASTM-E-145-1994 Temperature Recorder

321 A P,T Temperature Uniformity Test

Water bath

ื‘ื“ื™ืงืช ืื—ื™ื“ื•ืช ื˜ืžืคืจื˜ื•ืจื”,ืืžื‘ื˜ื™ื•ืช ืžื™ื

[20 0C to 100 0C]

0.9 0C ASTM-E-715-80(2006) Temperature Recorder

322 A P,T Temperature

Water bath

ื˜ืžืคืจื˜ื•ืจื”, ืืžื‘ื˜ื™ื•ืช ืžื™ื

[20 0C to 100 0C] 0.5 0C ASTM-E-715-80(2006) Temperature Recorder