test report product upgrading and recycling...united kingdom valpak italy re.media . this report...
TRANSCRIPT
This report becomes void if all pages not included. 1
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
TEST REPORT
PRODUCT UPGRADING AND RECYCLING
Report No. : 15-07-QAR-002
Approved by
(Signature) :
Date of issue : 2015/ 07/ 22
Contents : 25 Pages
Testing Laboratory Name : Electronics Testing Center, Taiwan.
Address : No.8, Lane 29, Wenming Rd. Guishan Dist. Taoyuan City
33383, Taiwan, R.O.C.
Subcontract Lab. : Environmental Protection and Industrial Safety/ Hygiene
Department
Address : No.8, Lane 29, Wenming Rd. Guishan Dist. Taoyuan City
33383, Taiwan, R.O.C.
Applicant's Name : VXL Instruments Limited
Address
: No. 17, House of Excellence, Electronic City, Hosur
Road, Bangalore 560100, INDIA
Test Specification
Standard : WEEE (2012/19/EU)
Test procedure : None
Non-standard test method : None
Type of Test Object : THIN CLIENT
Trademark
:
Factory : VXL Instruments Limited
Model and/ or type reference : Itona IQByy Series (x can be 0~9 or A~Z)
Series Model : ----
Rating(s) : ----
1. Selective treatment material/component of waste electrical and electronic equipment is
removed in accordance with WEEE Directive Annex VII and 75/442/EEC article.
2. The results shown in this test report refer only to the sample(s) tested.
This report becomes void if all pages not included. 2
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
Content of WEEE Compliance Assessment Report
Item Content
1
Product Information
In this section, it states which category your product belongs in accordance with
2012/19/EU WEEE Directive Annex I, and describes the product in brief, such as
product layout, weight, etc.
2
Dismantling Process and Special Handling Needs
This disassembly process is to optimize dismantling procedure to the least steps, costs
and manpower. Also it ensures the selective treatment for materials and components
of WEEE Annex VII are removed accordingly.
The disassembly process shows graphic instructions with pictures taken during the
dismantling procedures step by step.
3 3R Assessment
Assess the product in recycling performance in accordance with reuse, recycling &
recovery targets in the WEEE Directive and for EPEAT
4 WEEE Annex VII (components with special handling needs)
In this section, we will show the dismantling procedure for the selective treatment of
materials/components with special handling needs of WEEE Annex VII
Notes:
1. ETC WEEE Compliance Assessment Report is developed and based on ECMA 341 Design
for Environment standard, VDI 2243 Design for Recycling standard and CECED Guidance
on information for treatment facilities.
2. The content of this report is for references, but not for advertising publicity or other
commercial purpose.
3. The assessment report shall not be reproduced, except in full with the written approval of
ETC.
Address: No.8, Lane 29, Wenming Rd. Guishan Dist. Taoyuan City 33383, Taiwan, R.O.C.
TEL: 886-3-328-0026 ext 627
FAX: 886-3-327-6176
ELECTRONICS TESTING CENTER, TAIWANENVIRONMENTAL PROTECTION AND INDUSTRIAL SAFETY/HYGIENE DEPARTMENT
This report becomes void if all pages not included. 3
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
ACKNOWLEDGEMENT ETC 3R compliance assessment report is accepted and recommended as a reference for
recycling electrical and electronic equipment by the following recyclers and compliance schemes
in the EU member states:
Member State Compliance
Scheme/Recycler Logo
Spain ECOASIMELEC
Germany EGR
France Eco-systèmes
United Kingdom VALPAK
Italy Re.Media
This report becomes void if all pages not included. 4
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
Index
1. Product Information ............................................................................................................... 5
- WEEE Category .................................................................................................................. 5
- General Information ............................................................................................................ 6
- Item List .............................................................................................................................. 7
2. Dismantling Process and Special Handling Needs ............................................................. 8
Adapter ............................................................................................................................... 14
- Part List - Package ........................................................................................................... 17
- Part List - Itona IQByy series ............................................................................................ 17
- Part List - Adapter ............................................................................................................. 17
- Joint Technology Information - Itona IQByy series ............................................................ 18
- Joint Technology Information - Adapter ............................................................................. 18
3. 3R Assessment .................................................................................................................... 19
4. WEEE Annex VII (components with special handling needs) .......................................... 20
5. Plastic Composition Analysis ............................................................................................. 21
- Test Method ...................................................................................................................... 21
- Test Results ...................................................................................................................... 22
6. Product Specification .......................................................................................................... 23
This report becomes void if all pages not included. 5
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
1. Product Information
- WEEE Category
Category Recovery
Rate Recycling
Rate
1.Large household appliance 80 % 75 %
2.Small household appliance 70 % 50 %
*** 3.IT and telecommunications equipment 75 % 65 %
4.Consumer equipment and Photovoltaic panels 75 % 65 %
5.Lighting equipment 70 % 50 %
6.Electrical and electronic tools (with the exception of large-scale stationary industrial tools)
70 % 50 %
7.Toys, leisure and sports equipment 70 % 50 %
8.Medical devices(with the exception of all implanted and infected products)
70 % 50 %
9.Monitoring and control instrument 70 % 50 %
10.Automatic dispensers 80 % 75 %
The table above shown which category your product belong to. The row revised by blue color is
the right category the product in. The rate of recovery and the rate of reuse and recycling of the
product meet the minimum rate stipulated by WEEE Directive (2012/19/EU). PS:Minimum recovery targets and Applicable date refered to Annex V of 2012/19/EU[WEEE Directive(recast)]
This report becomes void if all pages not included. 6
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
- General Information
Thin Clients are terminal devices that connect to multi-user application servers operating
under Citrix XenDesktop, XenApp, VMware View connection server and Windows 2003/2008
terminal servers.
Itona IQB series delivers smart and robust solutions for thin client computing. It is an
aesthetically and ergonomically designed compact desktop, providing simultaneous
full screen connectivity to Windows and UNIX application servers. Itona IQB series is a
powerful business alternative to users using Win32 applications while continuing access to
UNIX applications.
This thin client communicates with application servers via the ICA protocol developed by
Citrix Systems Inc., Remote Desktop Protocol from Microsoft and a host of other popular
connectivity protocols.
Fig 1: Product information on package
Fig 2: Product photo
This report becomes void if all pages not included. 7
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
- Item List
Itona IQByy series Adapter
BOX(G1) FOAM(G2)
External Electric Cables(A3) BASE(G4)
This report becomes void if all pages not included. 8
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
2. Dismantling Process and Special Handling Needs Items marked in Red (noted as Annex VII part) are substances, preparations, or components with special handling needs, due to the toxicity potential of elements contained therein.
: General Part
: Annex VII Part
: Separate Direction
Separate 2: Pry (Snap Fit x 4) to remove the Part 2.
Separate 1: Unscrew (Cross Screw x 2) to remove the Part 1.
Remove
Remove
Unscrew
1
1
2
Separate 2 Separate 1
Pry
This report becomes void if all pages not included. 9
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
: General Part
: Annex VII Part
: Separate Direction
Separate 3: Remove (Put Together x 2) the Part 3.
Remove
Separate 3
Separate 3
3
3
This report becomes void if all pages not included. 10
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
: General Part
: Annex VII Part
: Separate Direction
Separate 5: Unscrew (Cross Screw x 2) to remove the Part 4 from Part 5.
Remove
Separate 4
Separate 4: Unscrew (Cross Screw x 2) & cut (Wire Connection x 8) to separate the
object.
Remove Unscrew Cut
Unscrew
5 4
Separate 5
This report becomes void if all pages not included. 11
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
: General Part
: Annex VII Part
: Separate Direction
Separate 7: Unscrew (Cross Screw x 1) & cut (Wire Connection x 3) to remove the
Part 7.
Separate 6: Unscrew (Cross Screw x 6) to remove the Part 6.
Remove Unscrew
Unscrew & Cut Remove
Separate 6
Separate 7
7
6
This report becomes void if all pages not included. 12
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
: General Part
: Annex VII Part
: Separate Direction
Separate 9: Unscrew (Cross Screw x 6) to remove the Part 9.
Separate 8: Remove (Snap Fit x 1) the Part 8.
Remove
Remove
Unscrew
Unscrew
Separate 9 Separate 8
8
9
This report becomes void if all pages not included. 13
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
: General Part
: Annex VII Part
: Separate Direction
Separate 10: Cut (Wire Connection x 4) to remove the Part 10 from Part 11.
Remove Cut
Separate 10 10
11
This report becomes void if all pages not included. 14
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
Adapter
Separate 1: Remove (Extrusion Coat x 1) the Part 1.
Separate 2: Remove (Put Together x 1) the Part 2, and rip (Glued Joint x 1) label.
: General Part
: Annex VII Part
: Separate Direction
Rip Remove
Remove
Hot Air Blower & Knife
Separate 1
Separate 2
1
2
This report becomes void if all pages not included. 15
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
Separate 3: Cut (Soldered Joint x 1) to remove the Part 3.
Separate 4: Remove (Put Together x 1) the Part 4.
: General Part
: Annex VII Part
: Separate Direction
Remove
Remove Cut
Separate 3
Separate 4
4
3
This report becomes void if all pages not included. 16
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
Separate 5: Cut (Soldered Joint x 2) to remove the Part 5 from Part 6, and cut (Wire
Connection x1) wire.
: General Part
: Annex VII Part
: Separate Direction
Cut Cut
Separate 5
6
5
Remove
This report becomes void if all pages not included. 17
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
- Part List - Package
No. Name Material Quantity Weight(g) Characteristic Mark
G1 Box Paper 1 388 Recyclable NA
G2 Foam Foam 2 24 Recyclable NA
A3 External Electric
Cables ---- 1 200 Recyclable NA
G4 Base ABS 1 31 Recyclable
- Part List - Itona IQByy series
No. Name Material Quantity Weight(g) Characteristic Mark
G1 R&L Cover ABS 2 50 Recyclable
G2 Front Cover ABS 1 47 Recyclable
G3 Top & Bottom Cover ABS 2 208 Recyclable
A4 PCB PCB Complex 1 26 Recyclable NA
G5 PCB Cover Metal 1 44 Recyclable NA
G6 Cover Metal 1 140 Recyclable NA
A7 PCB PCB Complex 1 6 Recyclable NA
A8 Battery Battery
Complex 1 3 Recyclable NA
G9 Case Metal 1 244 Recyclable NA
A10 PCB PCB Complex 1 313 Recyclable NA
G11 Back Cover Metal 1 48 Recyclable NA
---- Screw(Cross) Metal 18 9 Recyclable NA
---- Wires & Cables ---- ---- 95 Recyclable NA
- Part List - Adapter
No. Name Material Quantity Weight(g) Characteristic Mark
G1 Top Cover PC 1 19 Recyclable
G2 Bottom Cover PC 1 19 Recyclable
G3 Metal Metal 1 14 Recyclable NA
A4 Plastic Plastic 1 4 Recyclable NA
A5 Capacitor Capacitor
Complex 1 12 Recyclable NA
A6 PCB PCB Complex 1 88 Recyclable NA
---- Wires & Cables ---- ---- 53 Recyclable NA
This report becomes void if all pages not included. 18
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
- Joint Technology Information - Itona IQByy series
No. Separate Joint Technology Quantity Dismantling Tool
01 Separate01 Screw(Cross) 2 Screwdriver (Cross)
02
03
Separate02
Separate03
Snap Fit 4 Chisel
Put Together 2 Without Tool
04 Separate04 Screw(Cross) 1 Screwdriver (Cross)
Wire Connection 8 Pliers
05 Separate05 Screw(Cross) 2 Screwdriver (Cross)
06 Separate06 Screw(Cross) 6 Screwdriver (Cross)
07 Separate07 Screw(Cross) 1 Screwdriver (Cross)
Wire Connection 3 Pliers
08 Separate08 Snap Fit 1 Without Tool
09 Separate09 Screw(Cross) 6 Screwdriver (Cross)
10 Separate10 Wire Connection 4 Pliers
Total
---- ----
Screw(cross) 18 Screwdriver (cross)
Put together 2 Without Tool
Snap fit 5 Pliers & Without Tool
Wire connection 15 Pliers
PS: Without Tool main handle
- Joint Technology Information - Adapter
No. Separate Joint Technology Quantity Dismantling Tool
01 Separate01 Extrusion Coat 1 Hot Air Blower & Knife
02 Separate02 Put Together 1 Without Tool
Glued Joint 1 Without Tool
03 Separate03 Soldered Joint 1 Pliers
04 Separate04 Put Together 1 Without Tool
05 Separate05 Soldered Joint 2 Pliers
Wire Connection 1 Pliers
Total
---- ----
put together 2 Without Tool
wire connection 1 Pliers
glued joint 1 Without Tool
Soldered Joint 3 Pliers
Extrusion Coat 1 Pliers & knife
PS: Without Tool main handle
This report becomes void if all pages not included. 19
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
3. 3R Assessment
Product Main Material Identification
Item Main Material Weight(g) Characteristic Percent(%)
1 Metal Total 499 Recyclable 23.9
2 Plastic 374 Recyclable 17.9
Brominated Plastic 4 Recyclable 0.2
3 Wires / Cables 148 Recyclable 7.1
4 Glass (non CRT) 0 Recyclable 0.0
5 Other Misc. materials 0 Recovery 0.0
Packaging materials 412 Recyclable 19.8
6 Annex VII Materials 648 Recyclable 31.1
Total weight : 2085.0 100.0
Recycling Rate (Reuse + Recycle) : 1986.4 95.3
Energy Recovery : 77.9 3.7
Recovery Rate (Reuse + Recycle + Energy Recovery) : 2064.3 99.0
WEEE Compliance
Item Weight(g) %
Recycle 1,986.4 95.3
Waste to Energy
77.9 3.7
Landfill 20.7 1.0
Product - WEEE Recycling Assessment
Landfill ~ 1.0%
95.3%
3.7%Recyclable
Waste to Energy
Landfill
This report becomes void if all pages not included. 20
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
4. WEEE Annex VII (components with special handling needs) Items in this table contain materials with special handling needs. However, the product do not include any “nonstandard or new” substances or technologies.
Package
No. Name Quantity Weight(g) Annex VII Materials Page
A3 External Electric
Cables 1 200 External Electric Cables 7
Itona IQByy series
No. Name Quantity Weight(g) Annex VII Materials Page
A4 PCB 1 26 Printed Circuit Assemblies > 10 cm2 10
A7 PCB 1 6 Printed Circuit Assemblies > 10 cm2 11
A8 Battery 1 3 Batteries 12
A10 PCB 1 313 Printed Circuit Assemblies > 10 cm2 13
Adapter
No. Name Quantity Weight(g) Annex VII Materials Page
A4 Plastic 1 13 Plastic containing Br flame
retardants 15
A5 Capacitor 1 9 Electrolite Capacitors over 2.5 cm
high & diameter 16
A6 PCB 1 312 Printed Circuit Assemblies > 10 cm2 16
This report becomes void if all pages not included. 21
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
5. Plastic Composition Analysis
- Test Method
Analytical
Substance Equipment Methods
XRF Screening
Action Limit(ppm)
Pb ED-XRF IEC 62321 Ed1: 2008 700
Cd ED-XRF IEC 62321 Ed1: 2008 70
Hg ED-XRF IEC 62321 Ed1: 2008 700
Cr ED-XRF IEC 62321 Ed1: 2008 700
Br ED-XRF IEC 62321 Ed1: 2008 300
This report becomes void if all pages not included. 22
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
- Test Results
Tested Part No. XRF Screening
(ppm)
Tested Part
Description Tested Part Photo
15-07-QAR-002-1
Cd: 0
Top Cover
(Itona IQByy series)
Pb: 0
Hg: 0
Br: 45.6
Cr: 42.1
15-07-QAR-002-2
Cd: 0
Front Cover
(Itona IQByy series)
Pb: 0
Hg: 0
Br: 44.8
Cr: 12.7
15-07-QAR-002-3
Cd: 0
Top Cover
(Adapter)
Pb: 0
Hg: 0
Br: 110.5
Cr: 0
15-07-QAR-002-4
Cd: 58.2
Plastic
(Adapter)
Pb: 0
Hg: 66.3
Br: 37072.5
Cr: 0
Note:
1. ppm : mg/kg (0.1% = 1000ppm)
This report becomes void if all pages not included. 23
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.
6. Product Specification
This report becomes void if all pages not included. 24
Report No.: 15-07-QAR-002ELECTRONICS TESTING CENTER TAIWANGreen Products Testing Lab.