ANGEL COLLEGE OF ENGINEERING & TECHNOLOGYTIRUPUR 641 665

(Approved by AICTE, New Delhi and Affiliated to Anna University of Technology, Coimbatore) An ISO 9001:2008 Certified Institution

DEPARTMENT OF FASHION TECHNOLOGYPlacement training cell

Test -2

Time: 45 mins Marks: 40 Date: 23-07-2012

PART –A

1. A train running at the speed of 60 km/hr crosses a pole in 9 seconds. What is the length of the train?a). 120 meters b). 180 meters c) 324 meters d) 150 meters

2. A train 110 meters long is running with a speed of 60 kmph. In what time will it pass a man who is running at 6 kmph in the direction opposite to that in which the train is going?a) 5 sec b) 6 sec c) 7 sec d) 10 sec

3. If 6 men and 8 boys can do a piece of work in 10 days while 26 men and 48 boys can do the same in 2 days, the time taken by 15 men and 20 boys in doing the same type of work will be: a) 4days b) 4days c) 4days d) 4days

4. A grocer has a sale of Rs. 6435, Rs. 6927, Rs. 6855, Rs. 7230 and Rs. 6562 for 5 consecutive months. How much sale must he have in the sixth month so that he gets an average sale of Rs. 6500?a). Rs. 4991 b) Rs. 5991 c) Rs. 6001 d) Rs. 6991

5. The average weight of 8 person's increases by 2.5 kg when a new person comes in place of one of them weighing 65 kg. What might be the weight of the new person?a) 76 kg b) 76.5 kg c) 85 kg d. Data inadequate e. None of these

6. A can finish a work in 18 days and B can do the same work in 15 days. B worked for 10 days and left the job. In how many days, A alone can finish the remaining work?a) 5 b) 5 ½ c) 6 d) 8

7. The cube root of .000216 is:a) .6 b) .06 c) 77

8. The least perfect square, which is divisible by each of 21, 36 and 66 is:a) 213444 b) 214344 c) 214434 d) 231444

9. If 3√5 + √125 = 17.88, then what will be the value of √80 + 6√5?a) 13.41 b) 20.46 c) 21.66 d) 22.35

10. The average monthly income of P and Q is Rs. 5050. The average monthly income of Q and R is Rs. 6250 and the average monthly income of P and R is Rs. 5200. The monthly income of P is:a) 3500 b) 4000 c) 4050 d) 5000

11. A takes twice as much time as B or thrice as much time as C to finish a piece of work. Working together, they can finish the work in 2 days. B can do the work alone in:a) 4 days b. 6 days c. 8 days d. 12 days

12. A and B can complete a work in 15 days and 10 days respectively. They started doing the work together but after 2 days B had to leave and A alone completed the remaining work. The whole work was completed in :a. 8 days b. 10 days c. 12 days d. 15 days

13. A works twice as fast as B. If B can complete a work in 12 days independently, the number of days in which A and B can together finish the work in:a. 4 days b. 6 days c. 8 days d. 18 days

14. The sum of ages of 5 children born at the intervals of 3 years each is 50 years. What is the age of the youngest child?a. 4 years b. 8 years c. 10 years d. None of these

15. A is two years older than B who is twice as old as C. If the total of the ages of A, B and C be 27, the how old is B?a. 7 b. 8 c. 9 d. 10

16. A grocer has a sale of Rs. 6435, Rs. 6927, Rs. 6855, Rs. 7230 and Rs. 6562 for 5 consecutive months. How much sale must he have in the sixth month so that he gets an average sale of Rs. 6500?

a. Rs. 4991 b. Rs. 5991 c. Rs. 6001 d. Rs. 699117. The average weight of A, B and C is 45 kg. If the average weight of A and B be 40 kg and that of B and C be 43

kg, then the weight of B is:a. 17 kg b. 20 kg c. 26 kg d. 31 kg

18. Which one of the following is not a prime number?a. 31 b. 61 c. 71 d. 91

19. What least number must be added to 1056, so that the sum is completely divisible by 23?a. 2 b. 3 c. 18 d. 21 E. None of these

20. How many of the following numbers are divisible by 132? 264, 396, 462, 792, 968, 2178, 5184, 6336a. 4 b. 5 c. 6 d. 7

Part B:21. The Buy plan consists of details such as:-

a) Country of delivery b) Fabric consumption c) Style description d) Costing22. Production Progress Chart is required to monitor:-

a) Market growth b) Cutting progress c) On-time performance d) Manpower23. The Production tracking tool for the Buyer is:-

a) PPRD b) WIP c) ABC analysis d) Machine to manpower ratio.24. Merchandiser must initially concentrate on:-

a) Production b) Samples c) Costing d) Machineries25. Sample making process needs to be co-coordinated with:-

a) Supervisor b) Sample in charge c) Buying house d) Operator26. Inspection is carried out to

a) Improve the Production b) Improve the Quality c) Check the Quality d) Know the Production27. During the Garment Processing Bottleneck leads in

a) Short Shipment b) Defective Garments c) Tight Garment d) Costlier Garment28. Among the following which is not a Quality control form

a) Specification Sheet b) Bundle ticket c) Pay roll form d) Cutting ticket29. Line balancing means

a) Arrangement of Garment b) Arrangement of Machine c) Arrangement of Manpower d) Arrangement of Raw material

30. _____________ is creating a particular product for a specified buyer.a) Scheduling b) Layout c) Product development d) Production planning

31. The goal of inspection is toa) detect a bad process immediately b) add value to a product or service c) correct deficiencies in

products d) correct system deficiencies32. Name the weave employed in Khaki dress?

a) Plain b) Satin c) Twill d) Basket weave33. Which type of weave produces lustrous surface?

a) Twill b) Satin c) Jacquard d) Pile weave34. Which type of weave produces lacy effect?

a) Jaquard b) Leno c) Pile d) Honey comb35. Most intricate and elaborate design is woven in

a) Carduroy b) Velvetten c) Jaquard d) Pile weave36. In straight draft _____________= _____________

a) Design = draft b) Draft = peg plan c) Peg plan = Denting plan d) None of the above.37. The plain Weave is variously known as ____________

a) Crepe b) Grecians c) cretonne d) Calico38. Texture is related to ______________

a) Count of yarn b) Relative density of threads c) Both (a) & (b) d) None of these

39. What are the two theories of colour mixing? a) Light theory b) pigment theory c) both (a) and (b) d) none of these

40. The pigment theory of colour is based on _________a) Light theory b) Brewster theory c) both (a) and (b) d) None of these

41. Which threads does not affect the strength and durability of the cloth?a) Wadded threads b) extra threads c) both a and b d) none of these

42. Desizing of a grey cotton fabric having starch based size cannot be done usinga) Amylase enzyme b) dilute HCL c) Hydrogen peroxide d) DMDHEU

43. A wool/acrylic blended fabric can be dyed to solid shade using a combination of a) Direct and acid dyes b) Vat and acid dyes c) Acid and acid dyes d) Direct and reactive dyes

44. The following dye will be suitable for sublimation transfer printing of polyestera) Reactive dyes b) Vat dyes c) Acid dyes d) Disperse dyes

45. The mercerization of cotton fibers results in a) Improved strength b) Increase affinity c) Increased bending rigidity d) Improved lustre

46. The highest rate of production in printing is obtained on a) Flat bed printing b) Block c) Digital printing d) Rotary screen printing

47. Single-end sizing involve a) Sizing of yarn sheet drawn from one beam only b) Sizing of only one yarn at a time c) Sizing of a yarn sheet with very low yarn density d) Sizing with very low concentration of liquor

48. If the warp cover factor is 22 and the weft cover factor is 16 then the cloth cover factor is a) 23.24 b) 24.41 c)25.43 d) 26.17

49. Which of the following is leaf fibre a) Ramie b. Banana c. Flax d. Sisal

50. ISO recommended international test conditions are a. 20°C ,65% b. 21°C ,65% c. 25°C, 65% d. 27°C, 65%

51. Density of cotton fibre is approximatelya. 1.52 denier b. 1.52 g/tex c. 1.52 kg/m3 d. 1.52 g/cm3

52. In a flat bed knitting machine, the loop length is controlled bya. Raising cam b. Stitch cam c. Clearing cam d. Guard cam

53. The power required for picking in a shuttle loom depends ona. Weave of the fabric b. Number of heald shaft c. Reed width d. Number of picking cams

54. Out of the following, the one which is NOT a surfactant isa. Reducing agent b. Wetting agent c. Detergent d. Dispersing agent

55. The machine used for continuous processing of fabric isa. Winchb. Kier c. J-Box d. Jigger

56. An example of a coagulant used in textile effluent treatment isa. Activated carbon b.Ferrous sulphate c. Hydrogen peroxide d. Sodium chloride

57. The nep setting on an evenness tester which will give the highest nep count isa. +400 % b. +280 % c. +200 % d. +140 %

58. The property of fabric which influences drape the most isa. Tensile b. Compressional c. Shear d. Surface

59. The coarsest yarn amongst the following isa. 100 Ne b. 50 denier c. 50 dtex d. 200 Nm

60. The value of sley eccentricity isa. 0.25 b. 0.50 c. 1.0 d. 4.0

61. What are bicomponent yarns?a. Two different yarns plied together b. Yarns consisting of two different natural fibres c. Yarns consisting of fibres of two different colours d. Yarns consisting of fibres made from two

polymers extruded simultaneously62. Colour design on both sides of the fabric. What is the most suitable colouration technique to produce the striped

design?a. Transfer printing b. Digital printing c. Piece dyeing d. Yarn dyeing

63. Which of the following textile furnishings most requires a fire retardant finish?a. Cotton towelling bath mat b. Cotton velveteen theatre curtains c. Wool twill weave infants blanketd. Wool plain weave upholstered restaurant chairs

64. Required for cleaning cloths for the home. Which fabric structure is most appropriate for this end-use?a. Woven pile b. Knitted pile c. Non-woven washable web d.Thermally bonded non-woven

65. Hand embroidery would be a suitable method of fabric decoration for which of the following end-uses?a. Beach towels, tents and cushions b. Cushions, christening gowns and wall hangingsc. Fashion articles, corporate wear and wall hangings d. Hand towels, school uniforms and high-end fashion

66. The impact of innovations and technological advances in machinery on garment manufacture has resulted in which of the following?a. Tariff protection b. Consistent quality c. Increased wastage d. Reduced consumer choice

67. Why would a textile garment manufacturer introduce a computer-linked sewing machine into its production operation?a. To improve garment construction and save time b. To improve garment construction and distribution channelsc. To improve fabric performance and save time d. To improve fabric performance and distribution channels

68. In response to changing consumer demands for improved sun protection, what features should fashion designers include in their designs?a. Body coverage and absorbency b. Light-resistant fabric and body coveragec. Ultra Protection Factor rated fabric and durability d. Ultra Protection Factor rated fabric and body coverage

69. A t-shirt with a designer logo displayed on it is an example of which aspect of marketing?a. Product planning b. Promotion strategy c. Product specification d. Place and distribution channels

70. What is the most suitable fibre, yarn, and fabric structure for sports socks?a. Nylon, filament, single-knit b. Rayon, staple yarn, and tricot knit c. Polyester, filament, double-knitd. Cotton, staple yarn, circular knit

71. Which of the following is an essential textile finish used in the production of theatre stage curtains?a. Fire-retardance b. Mercerisation c. Sanforisation d. Soil resistance

72. Which of the following have the greatest influence on the creative work of costume designers?a. Technology and globalization b. Self-expression and pollution c. Climate change and globalization d. Resources available and self-expression

73. Which fibre is most suitable for children’s clothing due to its high absorbency and comfort properties?a. Nylon b. Cotton c. Polyester d. Microfibre

74. Which property makes cotton suitable for printing?a. Crystalline structure b. Dimensional stability c. Hydrophilic nature d. hydrophobic nature

75. Which of the following apparel items requires properties of high absorbency, light weight and excellent strength?a. Business suit b. Football jersey c. Sleepwear d. Swimwear

76. The function of compactor in finishing process a) Width control b) Dimensional stability c) Both a & b d) crease removal

77. Indigo is aa. Direct dye b.Basic dye c.Vat dye d.Solubilized vat dye

78. ISO9000 seeks standardization in terms ofa. Products b. Production procedures c.suppliers' specifications d. Procedures to manage quality

79. Which of the following is true about ISO 14000 certification?a. It is a prerequisite for ISO 9000 certificationb. It indicates a higher level of adherence to standards than ISO 9000c. It is only sought by companies exporting their goods d. It deals with environmental management

80. Kaizen" is a Japanese term meaninga. A foolproof mechanism b. Just-in-time (JIT) c. A fishbone diagramd. Setting standards e. Continuous improvement